Format possible value range bounds of ioam6_id and ioam6_id_wide as
bullet list instead of running paragraph.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701031300.19088-3-bagasdotme@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alias names list for private VLAN proxy arp technology is formatted as
indented paragraph instead. Make it bullet list as it is better fit for
this purpose.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701031300.19088-2-bagasdotme@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thomas Gleixner says:
====================
ptp: Provide support for auxiliary clocks for PTP_SYS_OFFSET_EXTENDED
This is a follow up to the V1 series, which can be found here:
https://lore.kernel.org/all/20250626124327.667087805@linutronix.de
to address the merge logistics problem, which I created myself.
Changes vs. V1:
- Make patch 1, which provides the timestamping function temporarily
define CLOCK_AUX* if undefined so that it can be merged independently,
- Add a missing check for CONFIG_POSIX_AUX_CLOCK in the PTP IOCTL
- Picked up tags
Merge logistics if agreed on:
1) Patch #1 is applied to the tip tree on top of plain v6.16-rc1 and
tagged
2) That tag is merged into tip:timers/ptp and the temporary CLOCK_AUX
define is removed in a subsequent commit
3) Network folks merge the tag and apply patches #2 + #3
So the only fallout from this are the extra merges in both trees and the
cleanup commit in the tip tree. But that way there are no dependencies and
no duplicate commits with different SHAs.
Thoughts?
Due to the above constraints there is no branch offered to pull from right
now. Sorry for the inconveniance. Should have thought about that earlier.
====================
Link: https://patch.msgid.link/20250701130923.579834908@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow ioctl(PTP_SYS_OFFSET_EXTENDED*) to select CLOCK_AUX clock ids for
generating the pre and post hardware readout timestamps.
Aside of adding these clocks to the clock ID validation, this also requires
to check the timestamp to be valid, i.e. the seconds value being greater
than or equal zero. This is necessary because AUX clocks can be
asynchronously enabled or disabled, so there is no way to validate the
availability upfront.
The same could have been achieved by handing the return value of
ktime_get_aux_ts64() all the way down to the IOCTL call site, but that'd
require to modify all existing ptp::gettimex64() callbacks and their inner
call chains. The timestamp check achieves the same with less churn and less
complicated code all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250701132628.491315452@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The inlined ptp_read_system_[pre|post]ts() switch cases expand to a copious
amount of text in drivers, e.g. ~500 bytes in e1000e. Adding auxiliary
clock support to the inlines would increase it further.
Replace the inline switch case with a call to ktime_get_clock_ts64(), which
reduces the code size in drivers and allows to access auxiliary clocks once
they are enabled in the IOCTL parameter filter.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20250701132628.426168092@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
allow integration of depending changes into the networking tree.
-----BEGIN PGP SIGNATURE-----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=Z8Jn
-----END PGP SIGNATURE-----
Merge tag 'ktime-get-clock-ts64-for-ptp' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Base implementation for PTP with a temporary CLOCK_AUX* workaround to
allow integration of depending changes into the networking tree.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The timer which ensures that no more than 3 LACPDUs are transmitted in
a second rearms itself every 333ms regardless of whether an LACPDU is
transmitted when the timer expires. This causes LACPDU tx to be delayed
until the next expiration of the timer, which effectively aligns LACPDUs
to ~333ms boundaries. This results in a variable amount of jitter in the
timing of periodic LACPDUs.
Change this to only rearm the timer when an LACPDU is actually sent,
allowing tx at any point after the timer has expired.
Signed-off-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Reviewed-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Link: https://patch.msgid.link/20250625-fix-lacpdu-jitter-v1-1-4d0ee627e1ba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PTP implements an inline switch case for taking timestamps from various
POSIX clock IDs, which already consumes quite some text space. Expanding it
for auxiliary clocks really becomes too big for inlining.
Provide a out of line version.
The function invalidates the timestamp in case the clock is invalid. The
invalidation allows to implement a validation check without the need to
propagate a return value through deep existing call chains.
Due to merge logistics this temporarily defines CLOCK_AUX[_LAST] if
undefined, so that the plain branch, which does not contain any of the core
timekeeper changes, can be pulled into the networking tree as prerequisite
for the PTP side changes. These temporary defines are removed after that
branch is merged into the tip::timers/ptp branch. That way the result in
-next or upstream in the next merge window has zero dependencies.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250701132628.357686408@linutronix.de
change 'Maximium' to 'Maximum'
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20250702055820.112190-1-zhaochenguang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark Bloch says:
====================
Support rate management on traffic classes in devlink and mlx5
This patch series extends the devlink-rate API to support traffic class
(TC) bandwidth management, enabling more granular control over traffic
shaping and rate limiting across multiple TCs. The API now allows users
to specify bandwidth proportions for different traffic classes in a
single command. This is particularly useful for managing Enhanced
Transmission Selection (ETS) for groups of Virtual Functions (VFs),
allowing precise bandwidth allocation across traffic classes.
Additionally the series refines the QoS handling in net/mlx5 to support
TC arbitration and bandwidth management on vports and rate nodes.
Discussions on traffic class shaping in net-shapers began in V5 [1],
where we discussed with maintainers whether net-shapers should support
traffic classes and how this could be implemented.
Later, after further conversations with Paolo Abeni and Simon Horman,
Cosmin provided an update [2], confirming that net-shapers' tree-based
hierarchy aligns well with traffic classes when treated as distinct
subsets of netdev queues. Since mlx5 enforces a 1:1 mapping between TX
queues and traffic classes, this approach seems feasible, though some
open questions remain regarding queue reconfiguration and certain mlx5
scheduling behaviors.
Building on that discussion, Cosmin has now shared a concrete
implementation plan on the netdev mailing list [3]. The plan, developed
in collaboration with Paolo and Simon, outlines how net-shapers can be
extended to support the same use cases currently covered by
devlink-rate, with the eventual goal of aligning both and simplifying
the shaping infrastructure in the kernel.
This work was presented at Netdev 0x19 in Zagreb [4].
There we presented how TC scheduling is enforced in mlx5 hardware,
which led to discussions on the mailing list.
A summary of how things work:
Classification means labeling a packet with a traffic class based on
the packet's DSCP or VLAN PCP field, then treating packets with
different traffic classes differently during transmit processing.
In a virtualized setup, VFs are untrusted and do not control
classification or shaping. Classification is done by the hardware using
a prio-to-TC mapping set by the hypervisor. VFs only select which send
queue to use and are expected to respect the classification logic by
sending each traffic class on its dedicated queue. As stated in the
net-shapers plan [3], each transmit queue should carry only a single
traffic class. Mixing classes in a single queue can lead to HOL
blocking.
In the mlx5 implementation, if the queue used does not match the
classified traffic class, the hardware moves the queue to the correct
TC scheduler. This movement is not a reclassification; it’s a necessary
enforcement step to ensure traffic class isolation is maintained.
Extend devlink-rate API to support rate management on TCs:
- devlink: Extend the devlink rate API to support traffic class
bandwidth management
Introduce a no-op implementation:
- net/mlx5: Add no-op implementation for setting tc-bw on rate objects
Add support for enabling and disabling TC QoS on vports and nodes:
- net/mlx5: Add support for setting tc-bw on nodes
- net/mlx5: Add traffic class scheduling support for vport QoS
Support for setting tc-bw on rate objects:
- net/mlx5: Manage TC arbiter nodes and implement full support for
tc-bw
[1]
https://lore.kernel.org/netdev/20241204220931.254964-1-tariqt@nvidia.com/
[2]
https://lore.kernel.org/netdev/67df1a562614b553dcab043f347a0d7c5393ff83.camel@nvidia.com/
[3]
https://lore.kernel.org/netdev/d9831d0c940a7b77419abe7c7330e822bbfd1cfb.camel@nvidia.com/T/
[4]
https://netdevconf.info/0x19/sessions/talk/optimizing-bandwidth-allocation-with-ets-and-traffic-classes.html
====================
Link: https://patch.msgid.link/20250629142138.361537-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test suite validates the functionality of the devlink-rate API for
traffic class (TC) bandwidth allocation. It ensures that bandwidth can
be distributed between different traffic classes as configured, and
verifies that explicit TC-to-queue mapping is required for the
allocation to be effective.
The first test (test_no_tc_mapping_bandwidth) is marked as expected
failure on mlx5, since the hardware automatically enforces traffic
class separation by dynamically moving queues to the correct TC
scheduler, even without explicit TC-to-queue mapping configuration.
Test output on mlx5:
1..2
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results without TC mapping:
# TC 3: 0.19 Gbits/sec
# TC 4: 0.76 Gbits/sec
# Total bandwidth: 0.95 Gbits/sec
# TC 3 percentage: 20.0%
# TC 4 percentage: 80.0%
ok 1 devlink_rate_tc_bw.test_no_tc_mapping_bandwidth # XFAIL Bandwidth matched 80/20 split without TC mapping
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results with TC mapping:
# TC 3: 0.21 Gbits/sec
# TC 4: 0.78 Gbits/sec
# Total bandwidth: 0.98 Gbits/sec
# TC 3 percentage: 21.1%
# TC 4 percentage: 78.9%
# Bandwidth is distributed as 80/20 with TC mapping
ok 2 devlink_rate_tc_bw.test_tc_mapping_bandwidth
# Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce support for managing Traffic Class (TC) arbiter nodes and
associated vports TC nodes within the E-Switch QoS hierarchy. This
patch adds support for the new scheduling node type,
`SCHED_NODE_TYPE_VPORTS_TC_TSAR`, and implements full support for
setting tc-bw on both vports and nodes.
Key changes include:
- Introduced the new scheduling node type,
`SCHED_NODE_TYPE_VPORTS_TC_TSAR`, for managing vports within the TC
arbiter node.
- New helper functions for creating and destroying vports TC nodes
under the TC arbiter.
- Updated the minimum rate normalization function to skip nodes of type
`SCHED_NODE_TYPE_VPORTS_TC_TSAR`. Vports TC TSARs have bandwidth
shares configured on them but not minimum rates, so their `min_rate`
cannot be normalized.
- Implementation of `esw_qos_tc_arbiter_scheduling_setup()` and
`esw_qos_tc_arbiter_scheduling_teardown()` for initializing and
cleaning up TC arbiter scheduling elements. These functions now fully
support tc-bw configuration on TC arbiter nodes.
- Introduced a new helper `esw_qos_calculate_tc_bw_divider()` to
compute the total TC bandwidth share, which is used as a divider for
normalizing each TC's share.
- Added `esw_qos_tc_arbiter_get_bw_shares()` and
`esw_qos_set_tc_arbiter_bw_shares()` to handle the settings of
bandwidth shares for vports traffic class TSARs.
- `esw_qos_set_tc_arbiter_bw_shares()` normalizes each TC share based
on the total and the firmware's maximum allowed TSAR bandwidth share.
- Refactored `mlx5_esw_devlink_rate_node_tc_bw_set()` and
`mlx5_esw_devlink_rate_leaf_tc_bw_set()` to fully support configuring
tc-bw on devlink rate nodes and vports, respectively.
- Refactored `mlx5_esw_qos_node_update_parent()` to ensure that tc-bw
configuration remains compatible with setting a parent on a rate
node, preserving level hierarchy functionality.
- Refactored `esw_qos_calc_bw_share()` to generalize its input so it
can be used for both minimum rate and bandwidth share calculations.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce support for traffic class (TC) scheduling on vports by
allowing the vport to own multiple TC scheduling nodes. This patch
enables more granular control of QoS by defining three distinct QoS
states for vports, each providing unique scheduling behavior:
1. Regular QoS: The `sched_node` represents the vport directly,
handling QoS as a single scheduling entity.
2. TC QoS on the vport: The `sched_node` acts as a TC arbiter, enabling
TC scheduling directly on the vport.
3. TC QoS on the parent node: The `sched_node` functions as a rate
limiter, with TC arbitration enabled at the parent level, associating
multiple scheduling nodes with each vport.
Key changes include:
- Added support for new scheduling elements, vport traffic class and
rate limiter.
- New helper functions for creating, destroying, and restoring vport TC
scheduling nodes, handling transitions between regular QoS and TC
arbitration states.
- Updated `esw_qos_vport_enable()` and `esw_qos_vport_disable()` to
support both regular QoS and TC arbitration states, ensuring consistent
transitions between scheduling modes.
- Introduced a `sched_nodes` array under `vport->qos` to store multiple
TC scheduling nodes per vport, enabling finer control over per-TC QoS.
- Enhanced `esw_qos_vport_update_parent()` to handle transitions between
the three QoS states based on the current and new parent node types.
This patch lays the groundwork for future support for configuring tc-bw
on vports. Although the infrastructure is in place, full support for
tc-bw is not yet implemented; attempts to set tc-bw on vports will
return `-EOPNOTSUPP`.
No functional changes are introduced at this stage.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce support for enabling and disabling Traffic Class (TC)
arbitration for existing devlink rate nodes. This patch adds support
for a new scheduling node type, `SCHED_NODE_TYPE_TC_ARBITER_TSAR`.
Key changes include:
- New helper functions for transitioning existing rate nodes to TC
arbiter nodes and vice versa. These functions handle the allocation
of TC arbiter nodes, copying of child nodes, and restoring vport QoS
settings when TC arbitration is disabled.
- Implementation of `mlx5_esw_devlink_rate_node_tc_bw_set()` to manage
tc-bw configuration on nodes.
- Introduced stubs for `esw_qos_tc_arbiter_scheduling_setup()` and
`esw_qos_tc_arbiter_scheduling_teardown()`, which will be extended in
future patches to provide full support for tc-bw on devlink rate
objects.
- Validation functions for tc-bw settings, allowing graceful handling
of unsupported traffic class bandwidth configurations.
- Updated `__esw_qos_alloc_node()` to insert the new node into the
parent’s children list only if the parent is not NULL. For the root
TSAR, the new node is inserted directly after the allocation call.
- Don't allow `tc-bw` configuration for nodes containing non-leaf
children.
This patch lays the groundwork for future support for configuring tc-bw
on devlink rate nodes. Although the infrastructure is in place, full
support for tc-bw is not yet implemented; attempts to set tc-bw on
nodes will return `-EOPNOTSUPP`.
No functional changes are introduced at this stage.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce `mlx5_esw_devlink_rate_node_tc_bw_set()` and
`mlx5_esw_devlink_rate_leaf_tc_bw_set()` with no-op logic.
Future patches will add support for setting traffic class bandwidth
on rate objects.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test verifies that netdevsim correctly implements devlink ops callbacks
that set tc-bw on leaf or node rate object.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce support for specifying relative bandwidth shares between
traffic classes (TC) in the devlink-rate API. This new option allows
users to allocate bandwidth across multiple traffic classes in a
single command.
This feature provides a more granular control over traffic management,
especially for scenarios requiring Enhanced Transmission Selection.
Users can now define a relative bandwidth share for each traffic class.
For example, assigning share values of 20 to TC0 (TCP/UDP) and 80 to TC5
(RoCE) will result in TC0 receiving 20% and TC5 receiving 80% of the
total bandwidth. The actual percentage each class receives depends on
the ratio of its share value to the sum of all shares.
Example:
DEV=pci/0000:08:00.0
$ devlink port function rate add $DEV/vfs_group tx_share 10Gbit \
tx_max 50Gbit tc-bw 0:20 1:0 2:0 3:0 4:0 5:80 6:0 7:0
$ devlink port function rate set $DEV/vfs_group \
tc-bw 0:20 1:0 2:0 3:0 4:0 5:20 6:60 7:0
Example usage with ynl:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-set --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1,
"rate-tc-bws": [
{"rate-tc-index": 0, "rate-tc-bw": 50},
{"rate-tc-index": 1, "rate-tc-bw": 50},
{"rate-tc-index": 2, "rate-tc-bw": 0},
{"rate-tc-index": 3, "rate-tc-bw": 0},
{"rate-tc-index": 4, "rate-tc-bw": 0},
{"rate-tc-index": 5, "rate-tc-bw": 0},
{"rate-tc-index": 6, "rate-tc-bw": 0},
{"rate-tc-index": 7, "rate-tc-bw": 0}
]
}'
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-get --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1
}'
output for rate-get:
{'bus-name': 'pci',
'dev-name': '0000:08:00.0',
'port-index': 1,
'rate-tc-bws': [{'rate-tc-bw': 50, 'rate-tc-index': 0},
{'rate-tc-bw': 50, 'rate-tc-index': 1},
{'rate-tc-bw': 0, 'rate-tc-index': 2},
{'rate-tc-bw': 0, 'rate-tc-index': 3},
{'rate-tc-bw': 0, 'rate-tc-index': 4},
{'rate-tc-bw': 0, 'rate-tc-index': 5},
{'rate-tc-bw': 0, 'rate-tc-index': 6},
{'rate-tc-bw': 0, 'rate-tc-index': 7}],
'rate-tx-max': 0,
'rate-tx-priority': 0,
'rate-tx-share': 0,
'rate-tx-weight': 0,
'rate-type': 'leaf'}
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the nlmsg_for_each_attr_type() macro to simplify iteration over
attributes of a specific type in a Netlink message.
Convert existing users in vxlan and nfsd to use the new macro.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We used to do twice copy_from_iter() to copy virtio-net and packet
separately. This introduce overheads for userspace access hardening as
well as SMAP (for x86 it's stac/clac). So this patch tries to use one
copy_from_iter() to copy them once and move the virtio-net header
afterwards to reduce overheads.
Testpmd + vhost_net shows 10% improvement from 5.45Mpps to 6.0Mpps.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250701010352.74515-2-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With f95f0f95cfb7("net, xdp: Introduce xdp_init_buff utility routine"),
buffer length could be stored as frame size so there's no need to have
a dedicated tun_xdp_hdr structure. We can simply store virtio net
header instead.
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250701010352.74515-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem de Bruijn says:
====================
preserve MSG_ZEROCOPY with forwarding
Avoid false positive copying of zerocopy skb frags when entering the
ingress path if the skb is not queued locally but forwarded.
Patch 1 for more details and feature.
Patch 2 converts the existing selftest to a pass/fail test and adds
coverage for this new feature.
====================
Link: https://patch.msgid.link/20250630194312.1571410-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zerocopy skbs are converted to regular copy skbs when data is queued
to a local socket. This happens in the existing test with a sender and
receiver communicating over a veth device.
Zerocopy skbs are sent without copying if egressing a device. Verify
that this behavior is maintained even in the common container setup
where data is forwarded over a veth to the physical device.
Update msg_zerocopy.sh to
1. Have a dummy network device to simulate a physical device.
2. Have forwarding enabled between veth and dummy.
3. Add a tx-only test that sends out dummy via the forwarding path.
4. Verify the exitcode of the sender, which signals zerocopy success.
As dummy drops all packets, this cannot be a TCP connection. Test
the new case with unconnected UDP only.
Update msg_zerocopy.c to
- Accept an argument whether send with zerocopy is expected.
- Return an exitcode whether behavior matched that expectation.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630194312.1571410-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MSG_ZEROCOPY data must be copied before data is queued to local
sockets, to avoid indefinite timeout until memory release.
This test is performed by skb_orphan_frags_rx, which is called when
looping an egress skb to packet sockets, error queue or ingress path.
To preserve zerocopy for skbs that are looped to ingress but are then
forwarded to an egress device rather than delivered locally, defer
this last check until an skb enters the local IP receive path.
This is analogous to existing behavior of skb_clear_delivery_time.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630194312.1571410-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new test to ensure that when the transport changes a null pointer
dereference does not occur. The bug was reported upstream [1] and fixed
with commit 2cb7c756f6 ("vsock/virtio: discard packets if the
transport changes").
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 2 UID: 0 PID: 463 Comm: kworker/2:3 Not tainted
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:vsock_stream_has_data+0x44/0x70
Call Trace:
virtio_transport_do_close+0x68/0x1a0
virtio_transport_recv_pkt+0x1045/0x2ae4
vsock_loopback_work+0x27d/0x3f0
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x35a/0x700
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
Note that this test may not fail in a kernel without the fix, but it may
hang on the client side if it triggers a kernel oops.
This works by creating a socket, trying to connect to a server, and then
executing a second connect operation on the same socket but to a
different CID (0). This triggers a transport change. If the connect
operation is interrupted by a signal, this could cause a null-ptr-deref.
Since this bug is non-deterministic, we need to try several times. It
is reasonable to assume that the bug will show up within the timeout
period.
If there is a G2H transport loaded in the system, the bug is not
triggered and this test will always pass. This is because
`vsock_assign_transport`, when using CID 0, like in this case, sets
vsk->transport to `transport_g2h` that is not NULL if a G2H transport is
available.
[1]https://lore.kernel.org/netdev/Z2LvdTTQR7dBmPb5@v4bel-B760M-AORUS-ELITE-AX/
Suggested-by: Hyunwoo Kim <v4bel@theori.io>
Suggested-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250630-test_vsock-v5-2-2492e141e80b@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add three new macros: TRANSPORTS_G2H, TRANSPORTS_H2G and
TRANSPORTS_LOCAL.
They can be used to identify the type of the transport(s) loaded when
using the `get_transports()` function.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250630-test_vsock-v5-1-2492e141e80b@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the bindings for socfpga-dwmac to yaml. Since the original
text contained descriptions for two separate nodes, two separate
yaml files were created.
Signed-off-by: Mun Yew Tham <mun.yew.tham@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250630213748.71919-1-matthew.gerlach@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AMD XGBE hardware supports giant Ethernet frames up to 16K bytes.
Add support for configuring and enabling giant packet handling
in the driver.
- Define new register fields and macros for giant packet support.
- Update the jumbo frame configuration logic to enable giant
packet mode when MTU exceeds the jumbo threshold.
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701121929.319690-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set the driver limit to GSO_MAX_SIZE (512 KB).
This allows the admin/user to set a GSO limit up to this value, to
avoid segmenting too large GRO packets in the netem -> ifb path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250701084540.459261-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both functions are always called under RCU.
We remove the extra rcu_read_lock()/rcu_read_unlock().
We use skb_dst_dev_net_rcu() instead of skb_dst_dev_net().
We use dev_net_rcu() instead of dev_net().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new helpers as a step to deal with potential dst->dev races.
v2: fix typo in ipv6_rthdr_rcv() (kernel test robot <lkp@intel.com>)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new helper as a step to deal with potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new helpers as a first step to deal with
potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst->dev is read locklessly in many contexts,
and written in dst_dev_put().
Fixing all the races is going to need many changes.
We probably will have to add full RCU protection.
Add three helpers to ease this painful process.
static inline struct net_device *dst_dev(const struct dst_entry *dst)
{
return READ_ONCE(dst->dev);
}
static inline struct net_device *skb_dst_dev(const struct sk_buff *skb)
{
return dst_dev(skb_dst(skb));
}
static inline struct net *skb_dst_dev_net(const struct sk_buff *skb)
{
return dev_net(skb_dst_dev(skb));
}
static inline struct net *skb_dst_dev_net_rcu(const struct sk_buff *skb)
{
return dev_net_rcu(skb_dst_dev(skb));
}
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst_dev_put() can overwrite dst->output while other
cpus might read this field (for instance from dst_output())
Add READ_ONCE()/WRITE_ONCE() annotations to suppress
potential issues.
We will likely need RCU protection in the future.
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst_dev_put() can overwrite dst->input while other
cpus might read this field (for instance from dst_input())
Add READ_ONCE()/WRITE_ONCE() annotations to suppress
potential issues.
We will likely need full RCU protection later.
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(dst_entry)->lastuse is read and written locklessly,
add corresponding annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(dst_entry)->expires is read and written locklessly,
add corresponding annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: introduce net_aligned_data
____cacheline_aligned_in_smp on small fields like
tcp_memory_allocated and udp_memory_allocated is not good enough.
It makes sure to put these fields at the start of a cache line,
but does not prevent the linker from using the cache line for other
fields, with potential performance impact.
nm -v vmlinux|egrep -5 "tcp_memory_allocated|udp_memory_allocated"
...
ffffffff83e35cc0 B tcp_memory_allocated
ffffffff83e35cc8 b __key.0
ffffffff83e35cc8 b __tcp_tx_delay_enabled.1
ffffffff83e35ce0 b tcp_orphan_timer
...
ffffffff849dddc0 B udp_memory_allocated
ffffffff849dddc8 B udp_encap_needed_key
ffffffff849dddd8 B udpv6_encap_needed_key
ffffffff849dddf0 b inetsw_lock
One solution is to move these sensitive fields to a structure,
so that the compiler is forced to add empty holes between each member.
nm -v vmlinux|egrep -2 "tcp_memory_allocated|udp_memory_allocated|net_aligned_data"
ffffffff885af970 b mem_id_init
ffffffff885af980 b __key.0
ffffffff885af9c0 B net_aligned_data
ffffffff885afa80 B page_pool_mem_providers
ffffffff885afa90 b __key.2
v1: https://lore.kernel.org/netdev/20250627200551.348096-1-edumazet@google.com/
====================
Link: https://patch.msgid.link/20250630093540.3052835-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
____cacheline_aligned_in_smp attribute only makes sure to align
a field to a cache line. It does not prevent the linker to use
the remaining of the cache line for other variables, causing
potential false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
____cacheline_aligned_in_smp attribute only makes sure to align
a field to a cache line. It does not prevent the linker to use
the remaining of the cache line for other variables, causing
potential false sharing.
Move tcp_memory_allocated into a dedicated cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using per-cpu data for net->net_cookie generation is overkill,
because even busy hosts do not create hundreds of netns per second.
Make sure to put net_cookie in a private cache line to avoid
potential false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This structure will hold networking data that must
consume a full cache line to avoid accidental false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to USB4 specification, if E2E flow control is disabled for
the Transmit Descriptor Ring, the Host Interface Adapter Layer shall
not require any credits to be available before transmitting a Tunneled
Packet from this Transmit Descriptor Ring, so e2e flow control should
be enabled in both directions.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/20250624153805.GC2824380@black.fi.intel.com
Signed-off-by: zhangjianrong <zhangjianrong5@huawei.com>
Link: https://patch.msgid.link/20250628093813.647005-1-zhangjianrong5@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the description of tb_xdomain_enable_paths(), the third
parameter represents the transmit ring and the fifth parameter represents
the receive ring. tb_xdomain_disable_paths() is the same case.
[Jakub] Mika says: it works now because both rings ->hop is the same
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/20250625051149.GD2824380@black.fi.intel.com
Signed-off-by: zhangjianrong <zhangjianrong5@huawei.com>
Link: https://patch.msgid.link/20250628094920.656658-1-zhangjianrong5@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is not only a cosmetic change because the section mismatch checks
also depend on the name and for drivers the checks are stricter than for
ops.
However xircom_driver also passes the stricter checks just fine, so no
further changes needed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250627102220.1937649-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is not only a cosmetic change because the section mismatch checks
(implemented in scripts/mod/modpost.c) also depend on the object's name
and for drivers the checks are stricter than for ops.
However aq_pci_driver also passes the stricter checks just fine, so no
further changes needed.
The cheating^Wmisleading name was introduced in commit 97bde5c4f9
("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250630164406.57589-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the user reinitializes the network interface, the PHY will reinitialize,
and the CKO settings will revert to their initial configuration(be enabled).
To prevent CKO from being re-enabled,
en8811h_clk_restore_context and en8811h_resume were added
to ensure the CKO settings remain correct.
Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250630154147.80388-1-lucienzx159@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
