Willem de Bruijn says:
====================
SO_TXTIME improvements
FQ targets monotonic timestamps as generated by the TCP stack.
But SO_TXTIME was later added, which can send skbs with timestamps
against other clocks. It is now possible to detect these through skb
tstamp_type.
Make FQ robust by converting these timestamps for use in FQ (patch 2).
This also requires testing against out-of-bounds values. Prefer to do
this at the source, when parsing SCM_TXTIME (patch 1). But, tests in
the hot path are still needed, to handle BPF sources.
Extend the so_txtime selftest to handle this new case (patch 3).
v1: https://lore.kernel.org/20260603190243.2789335-1-willemdebruijn.kernel@gmail.com
====================
Link: https://patch.msgid.link/20260604194221.3319080-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a variant of the existing FQ tests, but pass CLOCK_TAI rather than
the native CLOCK_MONOTONIC clock id.
FQ used to imply monotonic. This is no longer the case, and the
inverse need not hold either. Rename $PREFIX_mono to $PREFIX_fq.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260604194221.3319080-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FQ currently assumes skb->tstamp holds monotonic time, as used by TCP.
Users with ns_capable CAP_NET_ADMIN can transmit skbs using SO_TXTIME
with CLOCK_MONOTONIC, CLOCK_REALTIME or CLOCK_TAI clockids as of
commit 80b14dee2b ("net: Add a new socket option for a future
transmit time.")
More recently, skbs also gained tstamp_type to explicitly communicate
the clockid of skb->tstamp, with commit 4d25ca2d68 ("net: Rename
mono_delivery_time to tstamp_type for scalabilty"), commit
1693c5db6a ("net: Add additional bit to support clockid_t timestamp
type") and a few others.
Detect other clocks and convert to monotonic for use in FQ. That is,
convert fq_skb_cb(skb)->time_to_send. Do not convert skb->tstamp
itself. Network device clocks are more commonly synchronized to TAI.
Conversion may be imprecise due to clock adjustment (e.g., adjfreq)
between when SCM_TSTAMP is set and when it is converted in fq_enqueue.
The common codepath is short, so skew will be well below common pacing
operation. Even in edge cases, bursts (too soon) or beyond horizon
(too late) are indistinguishable from network conditions. To which
senders must be robust, as long as infrequent.
Avoid overflow due to negative offsets becoming huge when converting
from signed ktime_t to u64 time_to_send. Bound lower to mono 1 and
upper to now + q->horizon. This protects against bad input, e.g.,
from BPF programs.
Detect legacy BPF programs that program skb->tstamp without setting
skb->tstamp_type. Here tstamp_type is zero (SKB_CLOCK_REALTIME), but
the value will be unrealistic for realtime in the 21st century. Follow
existing TIME_UPTIME_SEC_MAX as bound between mono and realtime.
Signed-off-by: Willem de Bruijn <willemb@google.com>
----
Changes
v1 -> v2
- replace Fixes tag with references inside the commit message
Link: https://patch.msgid.link/20260604194221.3319080-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Limit input to sane values to avoid having to add tests later in the
kernel hot path, e.g., in FQ.
SCM_TXTIME timestamps are converted to signed ktime_t when assigned to
skb->tstamp. Avoid having negative values overflow into large positive
ones when again used as u64, e.g., in FQ time_to_send.
For CLOCK_MONOTONIC, only allow positive values.
For CLOCK_REALTIME and CLOCK_TAI, allow equivalent values, i.e., no
older than the boot of the machine.
skb->tstamp zero is a special case signaling feature off. This is not
converted between clockids.
Handle the special case where the realtime clock is set so small that
real - mono is negative, however unlikely in practice.
Ideally we would also set a sane upper bound, but that would require
reading the clock, which is an expensive operation. Continue to defer
that validation to users of the data. FQ already does this.
Bound rather than return error on older timestamps. This is the
existing policy e.g., in FQ.
Signed-off-by: Willem de Bruijn <willemb@google.com>
----
Changes
v1 -> v2
- remove spurious semicolon at end of switch
- remove Fixes tag
Link: https://patch.msgid.link/20260604194221.3319080-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 can't be a module anymore, we no longer need to export:
- neigh_changeaddr
- neigh_carrier_down
- neigh_ifdown
- neigh_connected_output
- neigh_direct_output
- neigh_table_init
- neigh_table_clear
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260605073426.2922242-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sven Eckelmann:
- tp_meter: initialize last_recv_time during init
- convert cancellation of work items to disable helper
- clean up wifi detection cache (3 patches)
- clean up kernel-doc: corrections, reword, typos (6 patches)
-----BEGIN PGP SIGNATURE-----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=7tLs
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20260605' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches, all by
Sven Eckelmann:
- tp_meter: initialize last_recv_time during init
- convert cancellation of work items to disable helper
- clean up wifi detection cache (3 patches)
- clean up kernel-doc: corrections, reword, typos (6 patches)
* tag 'batadv-next-pullrequest-20260605' of https://git.open-mesh.org/batadv:
batman-adv: fix kernel-doc typos and grammar errors
batman-adv: fix batadv_v_ogm_packet_recv error handling kernel-doc
batman-adv: uapi: keep kernel-doc in struct member order
batman-adv: bla: update stale kernel-doc
batman-adv: tp_meter: update stale kernel-doc after refactoring
batman-adv: correct batadv_wifi_* kernel-doc
batman-adv: document cleanup of batadv_wifi_net_devices entries
batman-adv: use GFP_KERNEL allocations for the wifi detection cache
batman-adv: drop duplicated wifi_flags assignments
batman-adv: convert cancellation of work items to disable helper
batman-adv: tp_meter: initialize last_recv_time during init
====================
Link: https://patch.msgid.link/20260605072005.490368-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vSKv
-----END PGP SIGNATURE-----
Merge tag 'nf-next-26-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next,
this contains updates to address sashiko reports in IPVS and Netfilter
on possible pre-existing issues. This also includes a series to add
refcount for ct helper and timeout to deal with a corner case scenario
with unconfirmed conntracks flying to nfqueue.
1) Add a conn_max sysctl to IPVS to limit the maximum number of
connections, from Julian Anastasov.
2) Use get_unaligned_be16() to access TCP MSS in nfnetlink_osf,
from Fernando Fernandez Mancera.
3) Use {READ,WRITE}_ONCE to access helper flags from nfnetlink_helper.
Several patches for the synproxy infrastructure, from Fernando
Fernandez Mancera:
4) Drop packet if TCP timestamp adjustment fails.
5) Continue parsing of TCP timestamp to deal with possible duplicates.
6) Use {get,put}_unaligned_be32() to acess the TCP timestamp.
7) Hold ct->lock to initialize nf_ct_seqadj_init().
Updates for the ct timeout infrastructure, to deal with a corner case
for unconfirmed conntracks flying to nfqueue:
8) Add a refcount to track ct timeout policy use by ct extension,
release the timeout until the last ct extension drops the refcnt
on it.
Similar update for the ct helper infrastructure:
9) Dynamic allocation of ct helpers, as a preparation for adding
refcount to track ct extension use.
10) Move destroy_sibling_or_exp() to nf_conntrack_proto_gre, so
pptp conntrack helper module removal does not make this code
unreachable via the helper->destroy callback. This is another
dependency for the new refcount coming in this series.
11) Add a refcount to track use of it from the ct extension, then
ct helper and timeout is reachable to the connection until
it goes away.
12) Remove the genid infrastructure in ct extensions. The primary
goal was to detect that a ct extension such as ct timeout and
ct helper went stale for unconfirmed conntrack, either because
object or module was removed. This deactivates all ct extensions
though for this unconfirmed conntrack.
13) Call nf_ct_gre_keymap_destroy() if this is a master conntrack
with a pptp helper only.
sashiko.dev reports one more relevant issue when unsetting the helper
via ctnetlink that I will address in a follow up patch.
Then, two more assorted updates:
14) Avoid a unlikely underflow in bridge VLAN untag, only possible
if buggy bridge VLAN filtering is buggy, remove WARN_ON_ONCE
while at it. From David Carlier.
15) Use get_unaligned_be32() in nf_conntrack_tcp to access sack
extension, from Rosen Penev.
* tag 'nf-next-26-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack()
netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag
netfilter: conntrack: call nf_ct_gre_keymap_destroy() if master helper is pptp
netfilter: conntrack: revert ct extension genid infrastructure
netfilter: nf_conntrack_helper: add refcounting from datapath
netfilter: nf_conntrack_pptp: move GRE specific cleanup to GRE tracker
netfilter: nf_conntrack_helper: dynamically allocate struct nf_conntrack_helper
netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount
netfilter: synproxy: protect nf_ct_seqadj_init() with conntrack lock
netfilter: synproxy: fix unaligned memory access in timestamp adjustment
netfilter: synproxy: adjust duplicate timestamp options
netfilter: synproxy: drop packets if timestamp adjustment fails
netfilter: nfnetlink_cthelper: use {READ,WRITE}_ONCE for accessing helper flags
netfilter: nfnetlink_osf: fix mss parsing on big-endian architectures
ipvs: add conn_max sysctl to limit connections
====================
Link: https://patch.msgid.link/20260607094954.48892-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, mlx5 is querying the MPIR register to get the number of PFs
that should comprise the SD group.
However, this register does not reflect the correct number in complex
deployments. Hence, add an sd_group_size field to nic_vport_context to
determine the correct number of PFs, and add an sd_group_size capability
bit to indicate whether FW supports it.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260529052359.389413-3-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The vport context allowed_list_size was increased from 12 to 16 bits.
Writing to this field is protected by the log_max_current_uc/mc_list
capabilities. On older FW versions these capabilities are limited
to < 2K and only the high bits of the field are extended. This means
that the change is backward compatible with older FW versions.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260529052359.389413-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The timestamp-only fast path dereferences the option stream as
*(__be32 *)ptr, which assumes 4-byte alignment that the TCP option
stream does not guarantee. Use get_unaligned_be32() instead, which
reads the value safely and already returns host byte order, so the
htonl() on the comparison constant can be dropped.
This matches the existing get_unaligned_be32() use later in the same
function.
Assisted-by: Claude:Opus-4.7
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps
inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the
decrement still happens and wraps it to 255. The break only leaves
the inner switch -- a later path entry can set info->indev back to
a real device, and we end up returning with num_encaps == 255.
nft_dev_forward_path() then walks info.encap[] (size 2) up to
num_encaps, which means an OOB stack read and a bogus count copied
into the route descriptor.
Should only happen on a malformed bridge path stack, hence the WARN,
but worth handling sanely. Move the decrement out of the WARN.
[ While at this, remove the WARN_ON_ONCE since this can only happen
with a buggy bridge path stack --pablo ].
Fixes: e990cef651 ("netfilter: flowtable: add bridge vlan filtering support")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Read the L3FM and L4FM bits from the RX descriptor status word (RDES2)
and increment the corresponding ethtool statistics counters. This allows
users to observe L3/L4 filter hit rates via ethtool -S.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260604083037.24407-1-muhammad.nazim.amirul.nazle.asmade@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and
stream filter resources before adding VCAP actions. If a later step
fails, the resources allocated earlier in the function are not unwound.
Add error paths to release the stream filter, flow meter and stream gate
when setup fails after they have been acquired.
Also make sparx5_psfp_fm_add() return the acquired flow-meter id before
the existing-flow-meter early return. When an existing flow meter is
reused, sparx5_psfp_fm_get() increments its pool reference count, but the
caller previously kept psfp_fmid as 0. If a later setup step failed, the
error path could try to delete flow-meter id 0 instead of the reused flow
meter, leaving the incremented reference behind.
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20260603061716.747282-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo Bianconi says:
====================
net: airoha: Support multiple net_devices connected to the same GDM port
EN7581 or AN7583 SoCs support connecting multiple external SerDes (e.g.
Ethernet or USB SerDes) to GDM3 or GDM4 ports via a hw arbiter that
manages the traffic in a TDM manner. As a result multiple net_devices can
connect to the same GDM{3,4} port and there is a theoretical "1:n"
relation between GDM ports and net_devices.
┌─────────────────────────────────┐
│ │ ┌──────┐
│ P1 GDM1 ├────►MT7530│
│ │ └──────┘
│ │ ETH0 (DSA conduit)
│ │
│ PSE/FE │
│ │
│ │
│ │ ┌─────┐
│ P0 CDM1 ├────►QDMA0│
│ P4 P9 GDM4 │ └─────┘
└──┬─────────────────────────┬────┘
│ │
┌──▼──┐ ┌────▼────┐
│ PPE │ │ ARB │
└─────┘ └─┬─────┬─┘
│ │
┌──▼──┐┌─▼───┐
│ ETH ││ USB │
└─────┘└─────┘
ETH1 ETH2
This series introduces support for multiple net_devices connected to the
same Frame Engine (FE) GDM port (GDM3 or GDM4) via an external hw
arbiter. Please note GDM1 or GDM2 does not support the connection with
the external arbiter.
====================
Link: https://patch.msgid.link/20260603-airoha-eth-multi-serdes-v9-0-5d476bc2f426@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The EN7581 and AN7583 SoCs provide registers to configure hardware LAN/WAN
MAC addresses. These registers are used during FE hw acceleration to
determine whether received traffic is destined to this host (L3 traffic)
or should be switched to another device (L2 traffic).
The SoC hardware design assumes all interfaces configured as LAN (or WAN)
share the MAC address MSBs, which are programmed into the
REG_FE_{LAN,WAN}_MAC_H register. The LSBs of 'local' mac addresses can be
expressed as a range via the REG_FE_MAC_LMIN and REG_FE_MAC_LMAX
registers. In order to properly accelerate the traffic, FE module requires
the user to configure the REG_FE_{LAN,WAN}_MAC_H register respecting this
limitation. Please note a misconfiguration in REG_FE_{LAN,WAN}_MAC_H
will still allow the user to log into the device for debugging.
Previously, only a single interface was considered when programming these
registers. Extend the logic to derive the correct minimum and maximum
values for REG_FE_MAC_LMIN/REG_FE_MAC_LMAX when two or more interfaces are
configured as LAN or WAN. Since this functionality was not available
before this series, no regression is introduced.
Tested-by: Madhur Agrawal <madhur.agrawal@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260603-airoha-eth-multi-serdes-v9-6-5d476bc2f426@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce WAN flag to specify if a given device is used to transmit/receive
WAN or LAN traffic. Current codebase supports specifying LAN/WAN device
configuration in ndo_init() callback during device bootstrap.
In order to consider setups where LAN configuration is used even for
GDM3/GDM4 devices, check airoha_is_lan_gdm_dev() to select pse_port in
airoha_ppe_foe_entry_prepare().
Please note after this patch, it will be possible to specify multiple LAN
devices but just a single WAN one. Please note this change is not visible
to the user since airoha_eth driver currently supports just the internal
phy available via the MT7530 DSA switch and there are no WAN interfaces
officially supported since PCS/external phy is not merged mainline yet
(it will be posted with following patches).
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260603-airoha-eth-multi-serdes-v9-5-5d476bc2f426@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Theoretically, in the current codebase, two independent net_devices can
be connected to the same GDM port so we need to check the GDM port is not
used by any other running net_device before setting the forward
configuration to FE_PSE_PORT_DROP.
Moreover, always set in GDM_LONG_LEN_MASK field of REG_GDM_LEN_CFG
register the maximum MTU of all running net_devices connected to the same
GDM port.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260603-airoha-eth-multi-serdes-v9-4-5d476bc2f426@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
EN7581 or AN7583 SoCs support connecting multiple external SerDes (e.g.
Ethernet or USB SerDes) to GDM3 or GDM4 ports via a hw arbiter that
manages the traffic in a TDM manner. As a result multiple net_devices can
connect to the same GDM{3,4} port and there is a theoretical "1:n"
relation between GDM ports and net_devices.
┌─────────────────────────────────┐
│ │ ┌──────┐
│ P1 GDM1 ├────►MT7530│
│ │ └──────┘
│ │ ETH0 (DSA conduit)
│ │
│ PSE/FE │
│ │
│ │
│ │ ┌─────┐
│ P0 CDM1 ├────►QDMA0│
│ P4 P9 GDM4 │ └─────┘
└──┬─────────────────────────┬────┘
│ │
┌──▼──┐ ┌────▼────┐
│ PPE │ │ ARB │
└─────┘ └─┬─────┬─┘
│ │
┌──▼──┐┌─▼───┐
│ ETH ││ USB │
└─────┘└─────┘
ETH1 ETH2
Introduce support for multiple net_devices connected to the same Frame
Engine (FE) GDM port (GDM3 or GDM4) via an external hw arbiter.
Please note GDM1 or GDM2 does not support the connection with the external
arbiter.
Add get_dev_from_sport callback since EN7581 and AN7583 have different
logics for the net_device type connected to GDM3 or GDM4.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260603-airoha-eth-multi-serdes-v9-3-5d476bc2f426@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove redundant net_device pointer inside airoha_gdm_dev struct and
rely on netdev_from_priv routine instead. Please note this patch does
not introduce any logical change, just code refactoring.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260603-airoha-eth-multi-serdes-v9-2-5d476bc2f426@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
EN7581 and AN7583 SoCs support connecting multiple external SerDes to GDM3
or GDM4 ports via a hw arbiter that manages the traffic in a TDM manner.
As a result multiple net_devices can connect to the same GDM{3,4} port
and there is a theoretical "1:n" relation between GDM ports and
net_devices.
Introduce the ethernet node child of a specific GDM port in order to model
a given net_device that is connected via the external arbiter to the
GDM{3,4} port. This new ethernet node is defined by the "airoha,eth-port"
compatible string. Please note GDM1 and GDM2 does not support the
connection with the external arbiter and they are represented by an
ethernet node defined by the "airoha,eth-mac" compatible string.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260603-airoha-eth-multi-serdes-v9-1-5d476bc2f426@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Markus Stockhausen says:
====================
net: mdio: realtek-rtl9300: Refactor initialization and port lookup
The Realtek Otto switch platform consists of four different series
- RTL838x aka maple : 28 port 1G Switches
- RTL839x aka cypress : 52 port 1G Switches
- RTL930x aka longan : 28 port 1G/2.5G/10G Switches
- RTL931x aka mango : 56 port 1G/2.5G/10G Switches
A lot has been done to enhance the ethernet MDIO driver for simple
integration of more SoCs. Now it is time to solve inconveniences
that were discovered during daily operation. That includes
- Consistent "of" API usage
- Tightening error handling and improving overall robustness.
- Adding support for PHY packages.
- Fixing setup order issues. These currently hinder the driver from
properly enabling the hardware on devices where U-Boot skips the
setup and leaves the controller registers untouched.
====================
Link: https://patch.msgid.link/20260603175924.123019-1-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Realtek Otto switches usually make use of multiport PHYs (e.g. 8 port
1G RTL8218D or 4 port 2.5G RTL8224). The device tree can describe this
fact via an "ethernet-phy-package" node that resides between the bus
and the PHY node.
When looking up the device tree bus node via the chain port->phy->parent
the driver totally ignores the existence of a PHY package. Enhance the
lookup to take care of this feature.
Link: https://github.com/openwrt/openwrt/pull/23591
Signed-off-by: Manuel Stocker <mensi@mensi.ch>
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://patch.msgid.link/20260603175924.123019-8-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the former refactoring the existing otto_emdio_9300_mdiobus_init()
contains only the c22/c45 bus mode setup. Like the topology setup this
must run before bus registration. Otherwise the bus does not "speak" the
right protocol for PHY setup.
This setup is device-specific and other SoCs will need to set up other
register bits in the controller in the future. Therefore
- Relocate c22/c45 device tree readout to the very beginning of the probing
- Add a new device-specific setup_controller() into the info structure.
- Relocate otto_emdio_priv to satisfy the new info structure dependency.
- Rename otto_emdio_9300_mdiobus_init accordingly and add it to the
RTL9300 info structure. At the same time, adapt register naming
for the function to make it clear that it only applies to this SoC.
- Call setup_controller() prior to bus registration.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://patch.msgid.link/20260603175924.123019-7-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
otto_emdio_map_ports() is the central place to lookup the topology and the
properties of the Realtek ethernet MDIO controller from the device tree.
Deviating from this the c22/c45 detection via "ethernet-phy-ieee802.3-c45"
is running separately in otto_emdio_probe_one(). It loops over the same
nodes, just at a later point in time.
There is no benefit to divide this setup and to have a time window where
the data structure is only filled partially. Additionally it uses the
"fwnode" API. Consolidate the setup and convert it to the "of" API.
Remark. This is a subtle change for dangling PHY nodes (not referenced
by ethernet-ports). Before this commit all PHY nodes were evaluated for
c45 setup, now only the referenced ones.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://patch.msgid.link/20260603175924.123019-6-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Until now the driver sets up the port to bus/address topology of the
controller after all buses are set up via otto_emdio_probe_one(). This
does not work for devices where U-Boot skips this setup. It is not
only needed for the hardware internal background PHY polling engine
but it is essential for access to the PHYs during probing.
Depending on the SoC type there exist two different register arrays
- Bus mapping registers (RTL930x, RTL931x) define to which bus the port
is attached. E.g. [1]
- Address mapping registers (RTL838x, RTL930x, RTL931x) define to which
address of the bus the port is attached. E.g. [2]
Relocate the topology setup and make it generic. For this
- Define device-specific bus_base/addr_base attributes that give the
register base address where the mapping lives. In case one or both are
not given the SoC does not support this specific type of mapping.
- Create a helper otto_emdio_setup_topology() that writes the detected
topology to the registers.
- Call this helper prior to otto_emdio_probe_one().
- Remove unneeded code from otto_emdio_9300_mdiobus_init().
- Due to the added prefixes, increase define indentation
Subtle change: The old coding used regmap_bulk_write and silently wrote
bus=0/address=0 to mapping registers for ports that are out of scope.
The new coding leaves those untouched.
[1] https://svanheule.net/realtek/longan/register/smi_port0_15_polling_sel
[2] https://svanheule.net/realtek/longan/register/smi_port0_5_addr_ctrl
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://patch.msgid.link/20260603175924.123019-5-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bus probing of the MDIO driver uses a two stage approach.
1. The device tree "ethernet-ports" node is scanned to build a mapping
between ports and PHYs.
2. The children of the device tree "controller" are scanned to create
the individual MDIO buses.
The first step already checks the consistency of the PHY and bus nodes
that are linked via the ports. But it might miss a dangling bus child
node that is not linked. Step two simply iterates over all bus child
nodes and might read malformed data from nodes not checked in step one.
Harden this and return a meaningful error message.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://patch.msgid.link/20260603175924.123019-4-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to its design the MDIO driver needs to set up a port to bus/address
mapping during probing. The "ethernet-ports" subnodes are scanned and
from the "phy-handle" property the MDIO nodes are looked up. In case of
a malformed device tree the driver might produce out-of-bounds accesses.
The PHY address is not checked against the maximum supported address.
Add a sanity check and drop the unneeded MAX_SMI_ADDR define.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://patch.msgid.link/20260603175924.123019-3-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function has multiple issues:
- It uses __free low level cleanups
- It mixes "fwnode" and "of" functions
Convert this to a uniform "of" usage and manual reference counting
cleanup. With that also fix two subtle lookup bugs in the original
code.
mdio_dn = phy_dn->parent;
if (mdio_dn->parent != dev->of_node)
continue;
This skips an API access and therefore misses reference counting.
Additionally in the case of a very buggy device tree, phy_dn might
be a root node. Looking up its grandparent leads to a NULL pointer
access.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://patch.msgid.link/20260603175924.123019-2-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bit 16 of the MAC HW Feature1 register reports the DCB (Data Centre
Bridging) feature. Read it so that dma_cap.dcben and the debugfs
report it accurately. Right now it is always reported as being disabled.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260603173644.24371-1-ovidiu.panait.rb@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The HSR generic netlink family sets .netnsok = true. HSR devices can
live in network namespaces other than init_net.
Two async notifiers broadcast events with genlmsg_multicast(). They
are hsr_nl_ringerror() and hsr_nl_nodedown(). That helper delivers
only on the default genl socket in init_net. So the events always land
in init_net. The network namespace of the device does not matter.
This has two effects. A listener in the device's own namespace never
sees its own ring error and node down events. A privileged listener in
init_net receives events from HSR devices in other namespaces. The
payload carries the peer node MAC (HSR_A_NODE_ADDR) and the slave port
ifindex (HSR_A_IFINDEX).
Switch both callers to genlmsg_multicast_netns(). Other families with
.netnsok = true already do this. Examples are gtp, ovpn, team,
batman-adv, netdev-genl, ethtool and handshake.
hsr_nl_ringerror() already has the slave port. It uses
dev_net(port->dev). hsr_nl_nodedown() takes the namespace from the
master port via hsr_port_get_hsr().
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260604054949.2999304-1-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bobby Eshleman says:
====================
net: devmem: allow bind-rx from non-init user namespaces
NETDEV_CMD_BIND_RX is GENL_ADMIN_PERM, which checks CAP_NET_ADMIN
against init_user_ns. With netkit and netns support for devmem, it is
now useful to let workloads holding CAP_NET_ADMIN only in their own
user_ns issue bind-rx for a netns owned by that user_ns.
The first patch switches the flag to GENL_UNS_ADMIN_PERM so the check
uses the target netns's owning user_ns. Init remains permitted.
The second patch just adds test cases. They are identical to
nk_devmem.py tests, but using a non-init userns.
====================
Link: https://patch.msgid.link/20260602-nl-prov-v2-0-ad721142c641@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add userns_devmem.py, which mirrors nk_devmem.py but places the netkit
guest in a netns whose owning user_ns is non-init. ncdevmem is ran there
via nsenter so the bind-rx call is issued with creds that hold
CAP_NET_ADMIN only in the child user_ns.
Without the preceding GENL_UNS_ADMIN_PERM patch the test fails at
bind-rx with EPERM, but with the patch the transfer completes and tests
pass.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260602-nl-prov-v2-2-ad721142c641@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NETDEV_CMD_BIND_RX is currently GENL_ADMIN_PERM, which checks
CAP_NET_ADMIN against init userns. With recent container/netkit/ns
support for devmem, other userns/netns use cases come online and require
bind-rx to allow CAP_NET_ADMIN in non-init user ns as well.
Switch the flag to GENL_UNS_ADMIN_PERM to allow bind-rx for
CAP_NET_ADMIN in the netns's owning userns as well.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260602-nl-prov-v2-1-ad721142c641@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These symbols don't need to be exported, they are only used from vmlinux:
- inet6addr_notifier_call_chain
- inet6addr_validator_notifier_call_chain
- in6addr_linklocal_allnodes
- in6addr_linklocal_allrouters
- in6addr_interfacelocal_allnodes
- in6addr_interfacelocal_allrouters
- in6addr_sitelocal_allrouters
- inet6_cleanup_sock
- ip6_sk_dst_lookup_flow
- ipv6_proxy_select_ident
- ip6_sk_update_pmtu
- ip6_sk_redirect
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260604174555.2801532-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These symbols no longer need to be exported, they are only used from
vmlinux:
- inet_send_prepare
- inet_splice_eof
- inet_sk_rebuild_header
- inet_current_timestamp
- snmp_fold_field
- snmp_get_cpu_field64
- snmp_fold_field64
- fib_nh_common_release
- fib_nh_common_init
- fib_nexthop_info
- fib_add_nexthop
- ip_build_and_send_pkt
- ipv4_sk_update_pmtu
- ipv4_sk_redirect
- rt_dst_clone
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260604173413.2782008-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
bridge: prepare lockless br_port_fill_attrs() (I)
medium-term goal is to allow "ip link show" dump commands to run without RTNL.
This round of patches adds/fixes some lockess accesses in bridge.
This is not complete, more patches will come later.
Ultimately all changes to p->flags should use set_bit()/clear_bit().
I repeat (AI agents might read this cover ?):
Many p->flags accesses are racy, and will hopefully be fixed in a
future series.
====================
Link: https://patch.msgid.link/20260604141343.2124500-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We might run br_port_fill_attrs() locklessly in the future.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260604141343.2124500-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sysfs show_port_id() and BRCTL_GET_PORT_INFO need this.
This will be needed for upcoming RTNL avoidance in "ip link"
dumps (cf br_port_fill_attrs()).
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260604141343.2124500-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sysfs show_priority() needs this.
Also br_port_fill_attrs() might in the future run without RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260604141343.2124500-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add READ_ONCE()/WRITE_ONCE() annotations around p->designated_port
This is needed at least for sysfs show_designated_port(), BRCTL_GET_PORT_INFO
and upcoming RTNL avoidance in "ip link" dumps (cf br_port_fill_attrs()).
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260604141343.2124500-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add READ_ONCE()/WRITE_ONCE() annotations around p->designated_cost
This is needed at least for sysfs show_designated_cost(), BRCTL_GET_PORT_INFO
and upcoming RTNL avoidance in "ip link" dumps (cf br_port_fill_attrs()).
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260604141343.2124500-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add READ_ONCE()/WRITE_ONCE() annotations around p->path_cost.
This is needed at least for sysfs show_path_cost(), BRCTL_GET_PORT_INFO
and upcoming RTNL avoidance in "ip link" dumps (cf br_port_fill_attrs()).
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260604141343.2124500-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use set_bit() and test_bit() lockless functions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260604141343.2124500-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use BR_PROMISC_BIT and set_bit(), clear_bit() and test_bit() lockless
functions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260604141343.2124500-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to use atomic operations for lockless p->flags changes
and reads.
Add definitions for bits in addition of masks so that we can use
test_bit(), clear_bit() and set_bit() in subsequent patches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260604141343.2124500-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
br_timer_value() can be called locklessly, the expires field
could be changed concurrently.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260604141343.2124500-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, pppd attempts to detect loopbacks on the underlying
interface using a pseudo-randomly generated magic number and checks if
the same value is received. The seed for the PRNG is a hash of hostname
XOR current time XOR pid, which is likely to collide on NIPA, causing
false positives. Disable magic number generation.
Reported-by: Matthieu Baerts <matttbe@kernel.org>
Fixes: 7af2a94f4d ("selftests: net: add tests for PPPoL2TP")
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260603061746.23452-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
