Some node unit addresses were put wrongly in the dts, resulting in
below warning when run with W=1
arch/arm64/boot/dts/qcom/sm8350.dtsi:693.34-702.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c222000: simple-bus unit address format error, expected "c263000"
arch/arm64/boot/dts/qcom/sm8350.dtsi:704.34-713.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c223000: simple-bus unit address format error, expected "c265000"
arch/arm64/boot/dts/qcom/sm8350.dtsi:1180.32-1185.5: Warning (simple_bus_reg): /soc@0/interconnect@90e0000: simple-bus unit address format error, expected "90c0000"
Fix by correcting to the correct address as given in reg node
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210513060733.382420-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
With this patch, DMA has a chance of probing and doing something
useful.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com>
Link: https://lore.kernel.org/r/20210417061951.2105530-3-balbi@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The speedbin value blown in the efuse is used to determine is used to
determine the voltage and frequency value for different IPs, including
GPU, CPUs... So it's really not a gpu specific information.
This patch simply renames 'gpu_speed_bin' node to 'speedbin'.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210527194455.782108-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
One of the QUSB USB PHY-s has been left enabled by
default, this is probably just a mistake as other
USB PHY-s are disabled by default.
It makes no sense to have it enabled by default as
not all board implement USB ports, so disable it.
Reviewed-by: Kathiravan T <kathirav@codeaurora.org>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20210526150125.1816335-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
As the name implies, the USB2 controller should only operate at
USB2 speeds. Make sure it does just that by pinning it to USB
High-Speed (USB2) mode.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210525200246.118323-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add channel nodes for the on die temperatures of PMICS
pmk8350, pm8350, pmr735a and pmr735b.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1621937466-1502-11-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add gpio ranges and correct the compatible to add
"qcom,spmi-gpio" as this pmic is on spmi bus.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1621937466-1502-9-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add gpio ranges and correct the compatible to add
"qcom,spmi-gpio" as this pmic is on spmi bus.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1621937466-1502-7-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add gpio ranges and correct the compatible to add
"qcom,spmi-gpio" as this pmic is on spmi bus.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1621937466-1502-5-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Disable Venus by default to allow booting without closed firmware and
enable it on the boards that didn't previously disable it. This commit
brings no functional difference.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-7-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Disable them by default to allow for booting without a display
and proprietary firmware. Then, enable them on boards that didn't
previously disable them. Hence, this commit brings no functional
difference.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-6-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Set the tcsr_mutex_regs size to 0x40000 to allow for accessing
all required registers that will be needed to support modem.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
QUP and UART names start from 1. There are 6 QUPs and 2 UARTs
per BLSP. Let's not further confuse programmers by stating
otherwise.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In order to prepare for feature development, the DTs
have to be workable with.. To achieve that:
- Rename msmgpio to tlmm (consistency with newer DTs)
- Rid msm8996-pins.dtsi and add the contents to msm8996.dtsi
- Modernize the pin nodes, make them more concise
- Add generic pin configuration for some hardware
- Fix up some names in preparation for BLSP/UART name cleaning..
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
qcom camera driver allocates the ICP firmware memory
dynamically, so the carveout region is unnecessary.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/20210525133242.188603-1-senozhatsky@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch adds audio support for Xiaomi Poco F1 phone. Phone's primary
Mic and 3.5mm Headphone jack are handled through the SDM845 sound card
and WCD9340 codec.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Link: https://lore.kernel.org/r/BN6PR2001MB17966ED1D787FA3F4B90A1A7D95B9@BN6PR2001MB1796.namprd20.prod.outlook.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The rmtfs_mem region is a weird one, downstream allocates it
dynamically, and supports a "qcom,guard-memory" property which when set
will reserve 4k above and below the rmtfs memory.
A common from qcom 4.9 kernel msm_sharedmem driver:
/*
* If guard_memory is set, then the shared memory region
* will be guarded by SZ_4K at the start and at the end.
* This is needed to overcome the XPU limitation on few
* MSM HW, so as to make this memory not contiguous with
* other allocations that may possibly happen from other
* clients in the system.
*/
When the kernel tries to touch memory that is too close the
rmtfs region it may cause an XPU violation. Such is the case on the
OnePlus 6 where random crashes would occur usually after boot.
Reserve 4k above and below the rmtfs_mem to avoid hitting these XPU
Violations.
This doesn't entirely solve the random crashes on the OnePlus 6/6T but
it does seem to prevent the ones which happen shortly after modem
bringup.
Fixes: 288ef8a426 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210502014146.85642-4-caleb@connolly.tech
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit b9d79e4ca4 ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.
It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:
drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
^
Fix it.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
msm:
- NULL ptr dereference fix
fbdev:
- procfs disabled warning fix
i915:
- gvt: Fix a possible division by zero in vgpu display rate calculation
-----BEGIN PGP SIGNATURE-----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=KQzl
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Bit later than usual, I queued them all up on Friday then promptly
forgot to write the pull request email. This is mainly amdgpu fixes,
with some radeon/msm/fbdev and one i915 gvt fix thrown in.
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
msm:
- NULL ptr dereference fix
fbdev:
- procfs disabled warning fix
i915:
- gvt: Fix a possible division by zero in vgpu display rate
calculation"
* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Use device specific BO size & stride check.
drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
drm/amd/pm: initialize variable
drm/radeon: Avoid power table parsing memory leaks
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/amd/display: Fix two cursor duplication when using overlay
drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
fbmem: Mark proc_fb_seq_ops as __maybe_unused
drm/msm/dpu: Delete bonkers code
drm/i915/gvt: Prevent divided by zero when calculating refresh rate
amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
drm/amdgpu: Register VGA clients after init can no longer fail
drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
drm/amdgpu: fix r initial values
drm/amd/display: fix wrong statement in mst hpd debugfs
amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
drm/amd/display: Reject non-zero src_y and src_x for video planes
-----BEGIN PGP SIGNATURE-----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=afQ9
-----END PGP SIGNATURE-----
Merge tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Turns out the bio max size change still has issues, so let's get it
reverted for 5.13-rc1. We'll shake out the issues there and defer it
to 5.14 instead"
* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
Revert "bio: limit bio max size"
-----BEGIN PGP SIGNATURE-----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=9Egy
-----END PGP SIGNATURE-----
Merge tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small SMB3 chmultichannel related changesets (also for stable)
from the SMB3 test event this week.
The other fixes are still in review/testing"
* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: if max_channels set to more than one channel request multichannel
smb3: do not attempt multichannel to server which does not support it
smb3: when mounting with multichannel include it in requested capabilities
- Prevent PSI state corruption when schedule() races with cgroup move. A
recent commit combined two PSI callbacks to reduce the number of cgroup
tree updates, but missed that schedule() can drop rq::lock for load
balancing, which opens the race window for cgroup_move_task() which then
observes half updated state. The fix is to solely use task::ps_flags
instead of looking at the potentially mismatching scheduler state
- Prevent an out-of-bounds access in uclamp caused bu a rounding division
which can lead to an off-by-one error exceeding the buckets array size.
- Prevent unfairness caused by missing load decay when a task is attached
to a cfs runqueue. The old load of the task is attached to the runqueue
and never removed. Fix it by enforcing the load update through the
hierarchy for unthrottled run queue instances.
- A documentation fix fot the 'sched_verbose' command line option
-----BEGIN PGP SIGNATURE-----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=L3ar
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler updates:
- Prevent PSI state corruption when schedule() races with cgroup
move.
A recent commit combined two PSI callbacks to reduce the number of
cgroup tree updates, but missed that schedule() can drop rq::lock
for load balancing, which opens the race window for
cgroup_move_task() which then observes half updated state.
The fix is to solely use task::ps_flags instead of looking at the
potentially mismatching scheduler state
- Prevent an out-of-bounds access in uclamp caused bu a rounding
division which can lead to an off-by-one error exceeding the
buckets array size.
- Prevent unfairness caused by missing load decay when a task is
attached to a cfs runqueue.
The old load of the task was attached to the runqueue and never
removed. Fix it by enforcing the load update through the hierarchy
for unthrottled run queue instances.
- A documentation fix fot the 'sched_verbose' command line option"
* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix unfairness caused by missing load decay
sched: Fix out-of-bound access in uclamp
psi: Fix psi state corruption when schedule() races with cgroup move
sched,doc: sched_debug_verbose cmdline should be sched_verbose
- Two fixes for the futex syscall related to the timeout handling.
FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and because
it's not set the time namespace adjustment for clock MONOTONIC is
applied wrongly.
FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its
always a relative timeout.
- Cleanups in the futex syscall entry points which became obvious when
the two timeout handling bugs were fixed.
- Cleanup of queued_write_lock_slowpath() as suggested by Linus
- Fixup of the smp_call_function_single_async() prototype
-----BEGIN PGP SIGNATURE-----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=bo8R
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of locking related fixes and updates:
- Two fixes for the futex syscall related to the timeout handling.
FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and
because it's not set the time namespace adjustment for clock
MONOTONIC is applied wrongly.
FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its
always a relative timeout.
- Cleanups in the futex syscall entry points which became obvious
when the two timeout handling bugs were fixed.
- Cleanup of queued_write_lock_slowpath() as suggested by Linus
- Fixup of the smp_call_function_single_async() prototype"
* tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Make syscall entry points less convoluted
futex: Get rid of the val2 conditional dance
futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
Revert 337f13046f ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
locking/qrwlock: Cleanup queued_write_lock_slowpath()
smp: Fix smp_call_function_single_async prototype
-----BEGIN PGP SIGNATURE-----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=ksMy
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Borislav Petkov:
"Handle power-gating of AMD IOMMU perf counters properly when they are
used"
* tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
can also be accounted to it. Along with a consolidation to the guest-specific context
tracking helpers.
- Provide for the host NMI handler running after a VMX VMEXIT to be able to run
on the kernel stack correctly.
- Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt relevant -
real hw supports both)
- A code generation improvement to TASK_SIZE_MAX through the use of alternatives
- The usual misc. and related cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=O3BS
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A bunch of things accumulated for x86 in the last two weeks:
- Fix guest vtime accounting so that ticks happening while the guest
is running can also be accounted to it. Along with a consolidation
to the guest-specific context tracking helpers.
- Provide for the host NMI handler running after a VMX VMEXIT to be
able to run on the kernel stack correctly.
- Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt
relevant - real hw supports both)
- A code generation improvement to TASK_SIZE_MAX through the use of
alternatives
- The usual misc and related cleanups and improvements"
* tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Consolidate guest enter/exit logic to common helpers
context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain
context_tracking: Consolidate guest enter/exit wrappers
sched/vtime: Move guest enter/exit vtime accounting to vtime.h
sched/vtime: Move vtime accounting external declarations above inlines
KVM: x86: Defer vtime accounting 'til after IRQ handling
context_tracking: Move guest exit vtime accounting to separate helpers
context_tracking: Move guest exit context tracking to separate helpers
KVM/VMX: Invoke NMI non-IST entry instead of IST entry
x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers
x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
x86/resctrl: Fix init const confusion
x86: Delete UD0, UD1 traces
x86/smpboot: Remove duplicate includes
x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant
