Inline the i2c_check_functionality() check, since the function returns a
boolean status rather than an error code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260408141926.1181389-4-thorsten.blum@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Inline the i2c_check_functionality() check, since the function returns a
boolean status rather than an error code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260408141926.1181389-3-thorsten.blum@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
aiptek_irq() derives macro key indices directly from tablet reports and
then uses them to index macroKeyEvents[]. Report types 4 and 5 also save
the derived value in aiptek->lastMacro and later use that state to
release the previous key.
Validate the raw macro index once before it enters that state machine, so
lastMacro only ever stores an in-range macro key. Keep direct bounds
checks for report type 6, which reads the macro number from the packet
body and uses it immediately.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260329001711.88076-1-pengpeng@iscas.ac.cn
[dtor: fix macro fallback in report 5s to use -1]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
gf2k_read() decodes the hat position from a 4-bit field and uses it
directly to index gf2k_hat_to_axis[]. The lookup table only has nine
entries, so malformed packets can read past the end of the fixed table.
Skip hat reporting when the decoded value falls outside the lookup
table instead of forcing it to the neutral position. This keeps the
fix local and avoids reporting a made-up axis state for malformed
packets.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260407120001.1-gf2k-v2-pengpeng@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
All items in the TODO block have since been addressed: axis tuning,
analog button handling, rumble support, and dance pad USB IDs are all
implemented. The manual changelog is also removed as history is tracked
in git.
Signed-off-by: Elliot Tester <elliotctester1@gmail.com>
Link: https://patch.msgid.link/20260325221618.135833-1-elliotctester1@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the common USB helpers for looking up bulk and interrupt endpoints
(and determining endpoint numbers) instead of open coding.
Note that the NEXIO data interface has two bulk endpoints (see commit
5197424cdc ("Input: usbtouchscreen - add NEXIO (or iNexio) support")
for the descriptors).
The lookup in probe handles both bulk-in and interrupt-in endpoints and
was added to handle NEXIO devices. Replace the open coded lookup with a
lookup for the common interrupt endpoint and an explicit fallback
accepting a bulk endpoint.
This iterates over the (two) endpoints twice for NEXIO devices but makes
it more clear what is going on.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260401082212.2180434-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for the I2C-connected Awinic AW86938 LRA haptic controller.
The AW86938 has a similar but slightly different register layout. In
particular, the boost mode register values.
The AW86938 also has some extra features that aren't implemented
in this driver yet.
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Link: https://patch.msgid.link/20260302-aw86938-driver-v4-3-92c865df9cca@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add bindings for the Awinic AW86938 haptic chip which can be found in
smartphones. These two chips require a similar devicetree configuration,
but have a register layout that's not 100% compatible.
Still, because chip model is fully detectable via ID register, these
chips can be documnented in the same file.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Link: https://patch.msgid.link/20260302-aw86938-driver-v4-2-92c865df9cca@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Previously the gain value was hardcoded. Take the magnitude passed via
the input API and configure the gain register accordingly.
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Link: https://patch.msgid.link/20260302-aw86938-driver-v4-1-92c865df9cca@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the common USB helper for looking up interrupt-in endpoints instead
of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330095948.1663141-4-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the common USB helpers for looking up interrupt-in endpoints (and
determining endpoint numbers) instead of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330095948.1663141-3-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the common USB helper for looking up interrupt-in endpoints instead
of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330095948.1663141-2-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver uses its own definitions for HID requests.
This leads to duplication and obfuscation. Use HID's
definitions.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260325143256.371854-2-oneukum@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver uses its own definitions for HID requests.
This leads to duplication and obfuscation. Use HID's
definitions.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260325143256.371854-1-oneukum@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Without a reported resolution, userspace was assuming 1 unit/mm which
is wildly wrong: a regular smartphone is clearly not 2.4 meters tall.
Most applications do not care much for this kind of raw mm value,
but Phosh's on-screen keyboard would accidentally trigger swipe-to-close
gestures due to misinterpreting small movements as huge ones.
Do what the older goodix.c driver does and set the resolution to 10
units/mm to make sure the numbers calculated by userspace are reasonable.
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20260321073242.556253-1-val@packett.cool
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of requesting interrupt normally and immediately disabling it
with call to disable_irq() use IRQF_NOAUTOEN to keep it disabled until
it is needed. This avoids a tiny window when interrupt is enabled but
not needed.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Also use list_first_entry() instead of list_entry() to emphasize intent.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Also stop trying to check if input device is opened/in use in the
interrupt handler - the interrupt is disabled when device is closed or
suspended.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(fwnode_handle) cleanup facility to ensure that references to
acquired fwnodes are dropped at appropriate times automatically.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Do not define or use iqs5xx_ihex_rec structure: the original code was
using just a couple of fields in it and instead used it to calculate
offset to record data. The data field was actually reserving space for
checksum.
Instead iterate through fields and advance pointer explicitly.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Note that callers of exc3000_vendor_data_request() always expect
response, so it was adjusted to always wait for it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Also fix the touchscreen not being marked as suspended when noone has
opened/is using it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
