- Log device readiness timeouts as errors, not warnings (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot -> D0uninitialized
transition), when the device may respond with Request Retry Status if it
needs more time to initialize (Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs (Lukas Wunner)
* pci/reset:
PCI: Drop unnecessary retries when restoring BARs
PCI: Wait for device readiness after D3hot -> D0uninitialized transition
PCI: Log device readiness timeouts as errors
- Don't try to power on/off devices unless we know they actually support
power control (Manivannan Sadhasivam)
* pci/pwrctrl:
PCI/pwrctrl: Lock device when calling device_is_bound()
PCI/pwrctrl: Do not try to power on/off devices that don't need pwrctrl
PCI/pwrctrl: Move pci_pwrctrl_is_required() earlier in file
- Fix race between pci_proc_init() and pci_bus_add_device() (Krzysztof
Wilczyński)
* pci/procfs:
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
- Set power state to 'unknown' for all devices, not just those with
drivers, during suspend (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device doesn't
respond to config reads, to avoid invalid array accesses (Marco
Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether devices may
be reset while resuming from suspend due to platform issues; use this in
nvme to avoid issues on Qcom RCs (Manivannan Sadhasivam)
* pci/pm:
nvme-pci: Use pci_suspend_retains_context() during suspend
PCI: qcom: Indicate broken L1SS exit during resume from system suspend
PCI: Indicate context lost if L1SS exit is broken during resume from system suspend
PCI: Add pci_suspend_retains_context() to check if device state is preserved during suspend
PCI/IOV: Skip VF Resizable BAR restore on read error
PCI: Skip Resizable BAR restore on read error
PCI: Stop setting cached power state to 'unknown' on unbind
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g., s390 ISM
BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
* pci/p2pdma:
PCI/P2PDMA: Add Intel QAT, DSA, IAA devices to whitelist
PCI/P2PDMA: Avoid returning a provider for non_mappable_bars
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked around a
WiFi device defect (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to avoid
clamping a link to 2.5GT/s after hot-plug changes the device (Maciej W.
Rozycki)
- Don't bother trying to retrain a 2.5GT/s link at 2.5GT/s since nothing
would be gained by the retrain (Maciej W. Rozycki)
* pci/enumeration:
PCI: Bail out early for 2.5GT/s devices in PCIe failed link retraining
PCI: Use pcie_get_speed_cap() in PCIe failed link retraining
PCI: Always lift 2.5GT/s restriction in PCIe failed link retraining
PCI: Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*)
- Don't reconfigure ASPM when entering low-power state; only do it
when returning back to D0 (Carlos Bilbao)
* pci/aspm:
PCI/ASPM: Don't reconfigure ASPM entering low-power state
pci_proc_attach_device() creates procfs entries for PCI devices and is
called from pci_bus_add_device(). It lazily creates the per-bus procfs
directory (bus->procdir) via proc_mkdir() on first use, and returns early
if proc_initialized is not yet set.
On x86 with ACPI, PCI enumeration occurs at subsys_initcall, before
pci_proc_init() sets proc_initialized at device_initcall. The
for_each_pci_dev() loop in pci_proc_init() then creates procfs entries for
these already-enumerated devices, but runs without holding
pci_rescan_remove_lock.
On ARM64 with devicetree, PCI host bridges probe at device_initcall. With
async probing enabled, pci_bus_add_device() can run concurrently with
pci_proc_init(), and both may call pci_proc_attach_device() for the same
device or for different devices on the same bus. As pci_host_probe() holds
pci_rescan_remove_lock while pci_proc_init() does not, there is no
serialisation between the two paths.
When two threads concurrently call pci_proc_attach_device() for devices on
the same bus, both observe bus->procdir as NULL and both call proc_mkdir().
The proc filesystem serialises directory creation internally, so only one
caller succeeds. The other results in a warning like:
proc_dir_entry '000c:00/00.0' already registered
The caller receives NULL (duplicate entry) and unconditionally stores it to
bus->procdir, corrupting the valid pointer set by the first caller.
Serialise access to proc_initialized, proc_bus_pci_dir, bus->procdir and
dev->procent with a new mutex local to drivers/pci/proc.c, and store the
created entries to bus->procdir and dev->procent only on success, so a
failed creation can never overwrite a valid pointer.
Additionally, wrap the for_each_pci_dev() loop in pci_proc_init() with
pci_lock_rescan_remove() to serialise against concurrent PCI bus
operations, add an early return in pci_proc_attach_device() when
dev->procent is already set to make the function idempotent, and clear
bus->procdir in pci_proc_detach_bus() to prevent use of a dangling pointer
after proc_remove().
Reported-by: Shuan He <heshuan@bytedance.com>
Closes: https://lore.kernel.org/linux-pci/20250702155112.40124-2-heshuan@bytedance.com/
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20260611150543.511422-1-kwilczynski@kernel.org
pci_resource_alignment() calculates resource alignment and should not alter
its input structs. Make its input parameters const.
It requires making also pci_cardbus_resource_alignment() input const.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-9-ilpo.jarvinen@linux.intel.com
pci_sriov_resource_alignment() inputs struct pci_dev which it should not
need to alter to calculate alignment.
Make pci_dev pci_sriov_resource_alignment() inputs const. It requires
making pci_iov_resource_size() input const as well.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-8-ilpo.jarvinen@linux.intel.com
Convert input pci_dev for pseries_get_iov_fw_value() and pnv_iov_get() to
const to be able to convert pcibios_iov_resource_alignment() as well in an
upcoming change.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-7-ilpo.jarvinen@linux.intel.com
__pci_bridge_assign_resources() inputs const pci_dev *bridge, but then
immediately casts const away to pass the bridge to
pdev_assign_resources_sorted().
As pdev_assign_resources_sorted() performs assignment of resources, it
is not possible to make its input parameter to const. Neither of the
__pci_bridge_assign_resources() callers requires the bridge parameter
to be const.
Thus, simply remove the out of place cast and convert the input parameter
to non-const.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-5-ilpo.jarvinen@linux.intel.com
Callers of __pci_bridge_assign_resources() and __pci_bus_assign_resources()
perform WARN_ON_ONCE(list_empty(add_list))) checks to sanity check that all
optional sizes were processed (and removed) from the list. The empty list
sanity check is duplicated code so the more appropriate place for it would
be inside the called function.
Placing the empty list check into __pci_bus_assign_resources() also ensures
all callsites do perform the sanity check which currently is not the case
when being called from enable_slot(). This inconsistency was noted by
Sashiko though only inside its in depth log but not flagged as a real
problem, possibly because this is only a sanity check that should never
fire. Nonetheless, this sanity check has been very useful to catch problems
early in the past so it's good to do it consistently everywhere.
As __pci_bus_assign_resources() is a recursive function, it needs to be
renamed to __pci_bus_assign_resources_one() to only perform the empty list
check at the end of processing the entire hierarchy in
__pci_bus_assign_resources().
Suggested-by: sashiko.dev # Sanity check missing from enable_slot()
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-4-ilpo.jarvinen@linux.intel.com
The resource fitting algorithm uses different names from the list holding
the optional sizes: added, add_head, add_list, and realloc_head. 'add_list'
sounds the most natural and some of the related variables also use 'add'
such as 'add_size'.
To reduce variation, rename 'added' and 'add_head' to 'add_list'. Also
rename some 'realloc_head' cases selectively to 'add_list'.
While it would be nice to rename every 'realloc_head' to 'add_list' for
consistency, it might create a backport headache with all the work going
into this algorithm that may need to be eventually backported. Thus, it's
better to leave 'realloc_head' as is for now.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-3-ilpo.jarvinen@linux.intel.com
The first device on a PCI root bus determines whether the host bridge is
whitelisted for P2PDMA. All Intel Xeon chips since Ice Lake (ICX, 2021)
expose a device with ID 0x09a2 as first device. It is loosely associated
with the IOMMU. All these Xeon chips support P2PDMA, so since the addition
of the device with commit feaea1fe8b ("PCI/P2PDMA: Add Intel 3rd Gen
Intel Xeon Scalable Processors to whitelist"), P2PDMA has been allowed on
all new Xeons without the need to amend the whitelist:
Xeons with Performance Cores:
Sapphire Rapids (SPR, 2023)
Emerald Rapids (EMR, 2023)
Granite Rapids (GNR, 2024)
Diamond Rapids (DMR, 2026)
Xeons with Efficiency Cores:
Sierra Forest (SRF, 2024)
Clearwater Forest (CWF, 2026)
However these Xeons also expose accelerators as first device on a root bus
of its own:
QuickAssist Technology (QAT, crypto & compression accelerator)
Data Streaming Accelerator (DSA, dma engine)
In-Memory Analytics Accelerator (IAA, compression accelerator)
Whitelist them for P2PDMA as well. Move their Device ID macros from the
accelerator drivers to <linux/pci_ids.h> for reuse by P2PDMA code.
Unfortunately the Device IDs vary across Xeon generations as additional
features were added to the accelerators. This currently necessitates an
amendment for each new Xeon chip.
For future chips, this need shall be avoided by an ongoing effort to extend
ACPI HMAT with PCIe P2PDMA characteristics (latency, bandwidth, ordering
constraints). The PCI core will be able look up in this BIOS-provided ACPI
table whether P2PDMA is supported, instead of relying on a whitelist that
needs to be amended continuously.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # QAT
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/6aac4922b5fe7070b11874427a9285e42ddd05a4.1780585518.git.lukas@wunner.de
pci_suspend_retains_context() lets PCI client drivers know if the platform
can retain the device context during suspend. This is decided based on
several factors like:
- Firmware involvement at the end of suspend
- Any platform limitation in waking from low power state (e.g., L1SS)
This API may be extended in the future to cover other platform specific
issues impacting the device low power mode during system suspend.
Use this API instead of checks like pm_suspend_via_firmware(). When
pci_suspend_retains_context() returns false, assume the platform cannot
retain the context and shutdown the controller. If it returns true, assume
that the context will be retained and keep the device in low power mode.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260519-l1ss-fix-v2-4-b2c3a4bdeb15@oss.qualcomm.com
Qcom PCIe RCs can successfully exit from L1SS during OS runtime. However,
during system suspend, the Qcom PCIe RC driver may remove all resource
votes and turn off the PHY to maximize power savings.
Consequently, when the host is in system suspend with the link in L1SS and
the endpoint asserts CLKREQ#, the RC driver must restore the PHY and enable
the REFCLK. This recovery process causes the L1SS exit latency time to be
exceeded (roughly L10_REFCLK_ON + T_COMMONMODE). If the RC driver were to
retain all votes during suspend, L1SS exit would succeed without issue but
at the expense of higher power consumption.
When the host fails to move the link from L1SS to L0 within the
L10_REFCLK_ON + T_COMMONMODE time, the endpoint may treat it as a fatal
condition and trigger Link Down (LDn) during resume. This LDn results in a
reset that destroys the internal device state.
To ensure that the client drivers can properly handle this scenario, let
them know about this platform limitation by setting the
'pci_host_bridge::broken_l1ss_resume' flag.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260519-l1ss-fix-v2-3-b2c3a4bdeb15@oss.qualcomm.com
Per PCIe v7.0, sec 5.5.3.3.1, when exiting L1.2 due to an endpoint
asserting CLKREQ# signal, the REFCLK must be turned on within the latency
advertised in the LTR message. This requirement applies to L1.1 as well.
On some platforms like Qcom, these requirements are satisfied during OS
runtime, but not while resuming from the system suspend. This happens
because the PCIe RC driver may remove all resource votes and turn off the
PHY analog circuitry during suspend to maximize power savings while keeping
the link in L1SS.
Consequently, when the endpoint asserts CLKREQ# to wake up, the RC driver
must restore the PHY and enable the REFCLK. When this recovery process
exceeds the L1SS exit latency time (roughly L10_REFCLK_ON + T_COMMONMODE),
the endpoint may treat it as a fatal condition and trigger Link Down (LDn).
This results in a reset that destroys the internal device state.
So to indicate this platform limitation to the client drivers, introduce a
new flag 'pci_host_bridge::broken_l1ss_resume' and check it in
pci_suspend_retains_context(). If the flag is set by the RC driver, the API
will return 'false' indicating the client drivers that the device context
may not be retained and the drivers must be prepared for context loss.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260519-l1ss-fix-v2-2-b2c3a4bdeb15@oss.qualcomm.com
Currently, PCI endpoint drivers (e.g. nvme) use pm_suspend_via_firmware()
to check whether device state is preserved during system suspend. If
firmware will be invoked at the end of suspend, we don't know whether
devices will retain their internal state.
But device context might be lost due to platform issues as well. Having
those checks in endpoint drivers will not scale and will cause a lot of
code duplication.
Add pci_suspend_retains_context() as a sole point of truth that the
endpoint drivers can rely on to check whether they can expect the device
context to be retained or not.
If pci_suspend_retains_context() returns 'false', drivers need to prepare
for context loss by performing actions such as resetting the device, saving
the context, shutting it down etc. If it returns 'true', drivers do not
need to perform any special action and can leave the device in active
state.
Right now, this API only incorporates pm_suspend_via_firmware(), but will
be extended in future commits.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260519-l1ss-fix-v2-1-b2c3a4bdeb15@oss.qualcomm.com
The kerneldoc for device_is_bound() states that it must be called with
the device lock taken. Synchronize the two calls in pwrctrl core.
Fixes: b35cf3b6aa ("PCI/pwrctrl: Add APIs to power on/off pwrctrl devices")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260518100700.47581-1-bartosz.golaszewski@oss.qualcomm.com
In 2012, commit 26f41062f2 ("PCI: check for pci bar restore completion
and retry") amended pci_restore_state() to attempt BAR restoration up to 10
times. This was necessary because back in the day, only a 100 msec delay
was observed after pcie_flr() carried out a Function Level Reset. The
retries ensured that BARs were restored even if devices needed more time to
come out of reset.
In 2016, commit 5adecf817d ("PCI: Wait for up to 1000ms after FLR reset")
extended the delay to 1 sec. Commit a2758b6b8f ("PCI: Rename
pci_flr_wait() to pci_dev_wait() and make it generic") subsequently
extended it further to 60 sec.
The lengthened delay makes it unnecessary to retry BAR restoration, so
drop it.
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Closes: https://lore.kernel.org/r/20260416225745.GA41850@bhelgaas/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/785c98b50a7a00d0698848c75d51b8f5669ad18f.1777814679.git.lukas@wunner.de
For a device that advertises No_Soft_Reset == 0, a transition from D3hot to
D0uninitialized is a soft reset, and the resulting internal device state is
undefined.
Per PCIe r7.0, sec 2.3.1, a transition from D3hot to D0uninitialized
mandates a minimum 10 ms delay before accessing the device. Following this
delay, the device is permitted to respond to initial configuration requests
with a Request Retry Status (RRS) completion status if it needs more time
to initialize.
Call pci_dev_wait() after pci_power_up() performs a D3hot->D0uninitialized
transition to ensure the device is ready to accept config accesses, as is
done after the similar transition in pci_pm_reset().
If the device is already ready, this is essentially a no-op except for one
additional config read.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260518191220.636213-3-bhelgaas@google.com
pci_dev_wait() waits for a device to be Configuration-Ready after a reset,
such as a Function-Level Reset (FLR), a soft reset during a D3hot->
D0uninitialized transition when No_Soft_Reset == 0), or a power-up sequence
from D3cold->D0uninitialized.
If pci_dev_wait() returns success, the device is guaranteed to respond to
configuration requests with Successful Completion status. If it times out,
device is completely non-responsive.
Upgrade the log level from pci_warn() to pci_err() to reflect this failure
state.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260518191220.636213-2-bhelgaas@google.com
Reconfiguring ASPM when a device transitions to low-power state can enable
L1.1/L1.2 substates on the PCIe link at a time when the device is sleeping
and may be unable to exit them. ASPM should be reconfigured on D0 entry
(resume), not on the way down.
pci_set_low_power_state() calls pcie_aspm_pm_state_change() after writing
D3hot to PCI_PM_CTRL. pcie_aspm_pm_state_change() resets link->aspm_capable
to link->aspm_support and then calls pcie_config_aspm_path(), which can
enable ASPM L1.1/L1.2 substates on the PCIe link. If the device cannot
recover the link from L1.2 while in D3hot, subsequent config space reads
return 0xFFFF ("device inaccessible") and pci_power_up() fails with
messages like:
vfio-pci 0000:5d:00.0: Unable to change power state from D3hot to D0, device inaccessible
This was observed on NVIDIA H100 SXM5 GPUs bound to vfio-pci when Linux
runtime PM suspends them to D3hot: the GPU becomes permanently inaccessible
and disappears from the PCIe bus.
The call to pcie_aspm_pm_state_change() in pci_set_low_power_state() was
restored by f93e71aea6 ("Revert "PCI/ASPM: Remove
pcie_aspm_pm_state_change()""), which reverted 08d0cc5f34 ("PCI/ASPM:
Remove pcie_aspm_pm_state_change()"). The revert was necessary because the
removal broke suspend/resume on certain platforms that required ASPM to be
reconfigured on D0 entry. However, the revert restored the call in both
pci_set_full_power_state() (D0 entry) and pci_set_low_power_state()
(low-power entry).
Only the D0-entry call is needed to fix the suspend/resume regression. The
low-power-entry call is harmful: reconfiguring ASPM immediately after
putting a device into D3hot can enable link substates that the device or
platform cannot exit while the device is sleeping.
Remove the pcie_aspm_pm_state_change() call from pci_set_low_power_state().
ASPM will still be reconfigured correctly when the device returns to D0 via
pci_set_full_power_state().
Fixes: f93e71aea6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Carlos Bilbao (Lambda) <carlos.bilbao@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260428040104.78524-1-carlos.bilbao@kernel.org
There's no point in retraining a failed 2.5GT/s device at 2.5GT/s, so just
don't and return early. While such devices might be unlikely to implement
Link Active reporting, we need to retrieve the maximum link speed and use
it in a conditional later on anyway, so the early check comes for free.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/alpine.DEB.2.21.2512080356070.49654@angie.orcam.me.uk
Rewrite a check for the maximum link speed in the Link Capabilities
register in terms of pcie_get_speed_cap(). No functional change.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/alpine.DEB.2.21.2512080348310.49654@angie.orcam.me.uk
Discard Vendor:Device ID matching in the PCIe failed link retraining quirk
and ignore the link status for the removal of the 2.5GT/s speed clamp,
whether applied by the quirk itself or the firmware earlier on. Revert to
the original target link speed if this final link retraining has failed.
This is so that link training noise in hot-plug scenarios does not make a
link remain clamped to the 2.5GT/s speed where an event race has led the
quirk to apply the speed clamp for one device, only to leave it in place
for a subsequent device to be plugged in.
Refer to the Link Capabilities register directly for the maximum link speed
determination so as to streamline backporting.
Fixes: a89c82249c ("PCI: Work around PCIe link training failures")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Cc: stable@vger.kernel.org # v6.5+
Link: https://patch.msgid.link/alpine.DEB.2.21.2512080331530.49654@angie.orcam.me.uk
There are two ways to graft resource into resource tree in PCI,
pci_assign_resource() and pci_claim_resource(). Only the former logs
the action, which complicated troubleshooting the cases where resources
are assigned by pci_claim_resource(), which mostly assigns the addresses
inherited from the FW.
Add logging into pci_claim_resource() to make troubleshooting easier.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-2-ilpo.jarvinen@linux.intel.com
Revert b0e85c3c85 ("PCI: Add Kconfig options for MPS/MRRS strategy"),
which allowed build-time selection of the "off", "default", "safe",
"performance", or "peer2peer" strategies for MPS and MRRS configuration.
These strategies can be selected at boot-time using the
"pci=pcie_bus_tune_*" kernel parameters.
Per the discussion mentioned below, these Kconfig options were added to
work around a hardware defect in a WiFi device used in a cable modem. The
defect occurred only when the device was configured with MPS=128, and
Kconfig was a way to avoid that setting. It was easier for the modem
vendor to use Kconfig and update the kernel image than to change the kernel
parameters.
Neither Kconfig nor kernel parameters are a complete solution because the
broken WiFi device may be used in other systems where it may be configured
with MPS=128 and be susceptible to the defect.
Remove the Kconfig settings to simplify the MPS code. If we can identify
the WiFi device in question, we may be able to make a generic quirk to
avoid the problem on all system.
This is not a fix and should not be backported to previous kernels.
Link: https://lore.kernel.org/all/CA+-6iNzd0RJO0L021qz8CKrSviSst6QehY-QtJxz_-EVY0Hj0Q@mail.gmail.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260326221311.1356180-1-bhelgaas@google.com
Extend the checks in pcim_p2pdma_init() and pcim_p2pdma_provider() to
exclude functions that have pdev->non_mappable_bars set.
Consumers such as VFIO were previously able to map these for access by the
CPU or P2P. Update the comment on non_mappable_bars to show it refers to
any access, not just userspace CPU access.
Fixes: 372d6d1b8a ("PCI/P2PDMA: Refactor to separate core P2P functionality from memory allocation")
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Matt Evans <mattev@meta.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Alex Williamson <alex@shazbot.org>
Link: https://patch.msgid.link/20260423173051.1999679-1-mattev@meta.com
pci_pwrctrl_is_required() detects whether a device needs PCI pwrctrl
support. It is currently used in pci_pwrctrl_create_device(), but not in
pci_pwrctrl_power_{on/off}_device() APIs. This leads to pwrctrl core trying
to power on/off incompatible devices like USB hub downstream ports defined
in DT.
Add this check to prevent pwrctrl core from poking at wrong devices.
Fixes: b35cf3b6aa ("PCI/pwrctrl: Add APIs to power on/off pwrctrl devices")
Reported-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: split pci_pwrctrl_is_required() move to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260421104102.12322-1-manivannan.sadhasivam@oss.qualcomm.com
Move pci_pwrctrl_is_required() earlier in the file so it can be used by
pci_pwrctrl_power_off_device() and pci_pwrctrl_power_on_device().
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: split to its own patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260421104102.12322-1-manivannan.sadhasivam@oss.qualcomm.com
sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register
to decide how many VF BARs to restore (nbars) and which VF BAR each
iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[],
which has only PCI_SRIOV_NUM_BARS (6) entries.
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN
reports this as:
UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]'
Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding
during a failed GC6 power state exit. The subsequent pci_restore_state()
invoked sriov_restore_vf_rebar_state() while config reads returned
0xffffffff, triggering the splat.
Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE.
No further VF BARs are touched, which is safe because a config read that
returns PCI_ERROR_RESPONSE indicates the device is unreachable and
restoration is pointless. This mirrors the guard in
pci_restore_rebar_state().
Fixes: 5a8f77e24a ("PCI/IOV: Restore VF resizable BAR state after reset")
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/44a4ae53ec2825816b816c85cd378430d9a95cc6.1776429882.git.mnencia@kcore.it
pci_restore_rebar_state() uses the Resizable BAR Control register to decide
how many BARs to restore (nbars) and which BAR each iteration addresses
(bar_idx).
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7, past the spec's valid ranges for both fields.
pci_resource_n() then returns an unrelated resource slot, whose size is
used to derive a nonsensical value written back to the Resizable BAR
Control register.
Bail out if any Resizable BAR Control read returns PCI_ERROR_RESPONSE. No
further BARs are touched, which is safe because a config read that returns
PCI_ERROR_RESPONSE indicates the device is unreachable and restoration is
pointless.
Fixes: d3252ace0b ("PCI: Restore resized BAR state on resume")
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/666cac19b5daa0ab0e0ab64454e76b4d24465dbd.1776429882.git.mnencia@kcore.it
When a PCI device is unbound from its driver, pci_device_remove() sets the
cached power state in pci_dev->current_state to PCI_UNKNOWN. This was
introduced by commit 2449e06a56 ("PCI: reset pci device state to unknown
state for resume") to invalidate the cached power state in case the system
is subsequently put to sleep.
For bound devices, the cached power state is set to PCI_UNKNOWN in
pci_pm_suspend_noirq(), immediately before entering system sleep.
Extend to unbound devices for consistency.
This obviates the need to change the cached power state on unbind, so stop
doing so.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/af7d11d3ceb231acc90829f7a5c8400c2446744f.1776415510.git.lukas@wunner.de
Raspberry Pi 3B by marking the VEC clk critical so it doesn't get
turned off and hang the bus.
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmnuTSsUHHN3Ym95ZEBj
aHJvbWl1bS5vcmcACgkQrQKIl8bklSUtpw//UbUCefvtSuj7UJLqgZXZgZvos9hU
kQO0kt+wsZCx0w3vKjJojW7E8IiITJDWzVDq6Ib6dVvpoLy0sOvSCbmKrcYLOjaf
kBXAvPHrpBNDDgRD+z3Ci9Sz8Dk9N+x7vQYvXGpUDbGY+dYAx8NGjdbSMqmQofC1
CWYgneh16hUYN8dgZOXC3fZmj4wHt4DGAS3f+uVWML1cLIDv5JR31SAu5i3htgxr
8JUDsBiM2quAjgV81Qp9B102hQGdKBW8AquUnknwtegja6+Go59x2/5jlvE0wjQJ
6Hf7eyUL6PgiAUEGiebLPMKgY6FWT9FtYCuuSqC84EiB5iiLr1MZBX5JsdJ15QRq
fogaABOJxvzy7XnVk0ELqNzn5/uJ/UDPFJkm2RUOUENswi4QuW3O9vJANKTFdUq4
CSz4JO5nqAe+gIbrURl+H8G50nWDHdId69uimbrhZst1E3sue9xDI9G7VwBTTf/8
o+8ylQkfWhGlSMq8yOMTTqUqk5O+uzfEYUYQ7EdzDknuoEsFh1Fy7UpzBLIqVdjd
WylzH9zOdVEI/OUuGmKOJHXy1amGBEV5EISvMRplLyB3R/mFWvIe5kZ4NhtrL9b0
zMjVShkrOP4X4ydOkz6l6oNwgBG+pnosewbwsSYKzSiF5czaXfv96UrQ1J/JNj27
X1Qr/BuY1E2dz0k=
=JtUn
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
- Drop class_create() for the "tsm" class
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCae40aBAcZGpid0BrZXJu
ZWwub3JnAAoJEN+KhhkeUWxn/F0BAIpdhnq3TbPMC6Pj0q3DfcXpP+LPD0pqqIom
TwsQVZJCAP4rYVEbIbgeXvkilr7Fpcs2AXbidR/ggBsR3lyVBSNhAA==
=ZK/r
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
- kbuild: builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds.
- kbuild: Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
-----BEGIN PGP SIGNATURE-----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=yCeR
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode
-----BEGIN PGP SIGNATURE-----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=mY/t
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
mentioning separately: Rafael's commit converting tpm_crb from ACPI driver
to a platform driver. Starting from this release cycle, the branch with TPM
changes mirrored to next is 'for-next-tpm', and patches for keys have their
own separate 'for-next-keys' branch.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaezVbgAKCRAaerohdGur
0ggHAQDmhaZ2C3ddAV1WjfXh1YqdWAmqEqoP7ZHAh4OrjyRPTQD+Pc4xl9TSOgHx
/9WzzV6AM6fL5RuC2/PO5RvOKF9mswc=
=tpJM
-----END PGP SIGNATURE-----
Merge tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Here are the accumulated fixes for 7.1-rc1 and a single structural
change worth mentioning separately: Rafael's commit converting tpm_crb
from ACPI driver to a platform driver"
* tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: stop transmit if retries are exhausted
tpm: tpm_tis: add error logging for data transfer
tpm: avoid -Wunused-but-set-variable
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm: Fix auth session leak in tpm2_get_random() error path
tpm: i2c: atmel: fix block comment formatting
tpm_crb: Convert ACPI driver to a platform one
tpm: Make tcpci_pm_ops variable static const
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
On Raspberry Pi 3B, the VEC clock is used by the VideoCore firmware
display driver, which remains active until the vc4 driver loads and
sends NOTIFY_DISPLAY_DONE. If this clock is disabled during boot, a bus
lockup happens and the firmware becomes unresponsive, causing a complete
system lockup.
Mark the VEC clock with CLK_IGNORE_UNUSED so it survives the unused
clock disablement and remains available until the vc4 driver takes over
display management.
Fixes: 672299736a ("clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/5f0bec08-f458-4fba-8bf3-06817a100c4c@sirena.org.uk
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260401111416.562279-2-mcanal@igalia.com
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com> # Active contributor to clk
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
