Define and use regRCC_STRAP0_RCC_DEV0_EPF0_STRAP0_nbif_4_10,
to get correct rev_id in nbif_v6_3_1_get_rev_id().
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Ramalingeswara Reddy, Kanala <Kanala.RamalingeswaraReddy@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
PSP v15.0.0 needs both TOC and TA firmware. Without the declaration
it won't get included in initramfs and leads to following failure:
```
Direct firmware load for amdgpu/psp_15_0_0_ta.bin failed with error -2
early_init of IP block <psp> failed -19
Fatal error during GPU init
```
Fixes: 9b24f63d82 ("drm/amdgpu: Enable support for PSP 15_0_0")
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
PCTL0__MMHUB_DEEPSLEEP_IB is 0x69004 on MMHUB 4,1,0 and
and 0x60804 on MMHUB 4,2,0. 0x62a04 is on MMHUB 1,8,0/1.
The DS bits are adjusted to cover more JPEG engines and MMHUB
version.
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
During GPU reset, the application could still run CPU page table updates. Each commit called
amdgpu_device_flush_hdp(), which on SR-IOV sends work through the KIQ ring.
That can advance sync_seq while the GPU is being reset,
leaving fence writeback out of sync and causing amdgpu_fence_emit_polling()
to time out on later KIQ use.
Fix:
amdgpu_vm_cpu_commit():
Reset will flush HDP anyway, the HDP flush in amdgpu_vm_cpu_commit() can be skipped
when a reset is ongoging.
Take reset_domain->sem with down_read_trylock() before amdgpu_device_flush_hdp().
If the reset path holds the write lock, skip the HDP flush so no HDP-related HW
access (including KIQ) runs during reset; state is re-established after reset.
Signed-off-by: Chenglei Xie <Chenglei.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Define and use regGOLDEN_TSC_COUNT_UPPER_smu_15_0_0 and
regGOLDEN_TSC_COUNT_LOWER_smu_15_0_0 for TSC upper and lower count.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Ramalingeswara Reddy, Kanala <Kanala.RamalingeswaraReddy@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Module reload would fail when create sys file that was not removed during
module unload.
Fixes: e0e9792ea2 ("drm/amdgpu: add an option to allow gpu partition allocate all available memory")
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
OverDriveTable.FanMinimumPwm and FeatureCtrlMask.PP_OD_FEATURE_FAN_LEGACY_BIT
have a hard dependency.
Invalid handling of this dependency leads to disabled thermal monitoring
and temperature boundary validation.
v2: squash in typo fix (Yang)
Fixes: 9710b84e2a ("drm/amd/pm: add overdrive support on smu v14.0.2/3")
Cc: stable@vger.kernel.org
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/i915/display: change pipe allocation order for discrete platforms
This is a topic pull request for changing the pipe allocation order for
discrete platforms from the usual A,B,C,D to A,C,B,D. The goal is to
help pipe joiner configurations that reserve the adjacent pipe as the
secondary pipe without the user space knowing. More details in the
relevant commit message. The CRTC iteration is also changed to remain in
pipe order.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/d69501d53c233386d70ed10290af24aafebf434f@intel.com
When big joiner is enabled, it reserves the adjacent pipe as the
secondary pipe. This happens without the user space knowing, and
subsequent attempts at using the CRTC with that pipe will fail. If the
user space does not have a coping mechanism, i.e. trying another CRTC,
this leads to a black screen.
Try to reduce the impact of the problem on discrete platforms by mapping
the CRTCs to pipes in order A, C, B, and D. If the user space reserves
CRTCs in order, this should trick it to using pipes that are more likely
to be available for and after joining.
Limit this to discrete platforms, which have four pipes, and no eDP, a
combination that should benefit the most with least drawbacks.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260413081609.969342-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
VESA backlight enable is possible when
BACKLIGHT_AUX_ENABLE_CAPABLE is true via AUX command or when
BACKLIGHT_PIN_ENABLE_CAPABLE is true via eDP connector pin.
Similarly, backlight brightness adjustment can be
done via AUX-based control or PWM pin-based control.
It means there can be three configurations:
1) Full AUX-based: Enable and adjustment both via AUX. We currently
support this (apart from the AUX luminance-based backlight control).
2) Hybrid: Enable via the BL_ENABLE pin, adjustment via either AUX or
PWM.
3) Fully PWM pin-based: Enable via the BL_ENABLE pin, adjustment via
PWM.
Since that only 1 is supported as of now we need to make
sure we do not try to manipulate backlight when
BACKLIGHT_AUX_ENABLE_CAPABLE is not set.
Also fix return value when condition is not fulfilled.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/15907
Fixes: 0fb03890d1 ("drm/i915/backlight: Check if VESA backlight is possible")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260407030710.1440046-1-suraj.kandpal@intel.com
(cherry picked from commit 102d44b3a8)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Currently our crtcs are registered in pipe order, and thus
all the for_intel_crtc*() iterators walk the crtcs in pipe
order. There are a bunch of places that more or less depend
on that. Eg. during plane updates and such we want joined
pipes to be processed back-to-back to give a better chance
of an atomic update across the whole set.
When we start to register crtcs in a different order we don't
want to change the order in which the pipes get handled.
Decouple the for_each_intel_crtc*() iterators from the crtc
registration order by using a separate list which will be
sorted by the pipe rather than the crtc index.
We could probably use a simple array or something, but that
would require some kind of extra iterator variable for the
macros, and thus would require a lot more changes. Using
a linked list keeps the fallout minimal. We can look at
using a more optimal data structure later.
I also added this extra junk to the atomic state iterators:
"(__i) = drm_crtc_index(&(crtc)->base), (void)(__i)"
even though the macro itself no longer needs the "__i" iterator.
This in case the "__i" is used by the caller, and to
avoid compiler warnings if it's completely unused now.
v2: Flip the pipe comparison (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260408155744.13326-3-ville.syrjala@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently the joiner primary->secondary hw state copy still happens from
the main compute_config loop alongside the primary uapi->hw state copy.
The primary uapi->hw state copy must therefore happen first, or else
we'll end up copying stale junk into the secondary.
We have a WARN in intel_atomic_check_joiner() to make sure the CRTCs
will be walked in the correct order. The plan is to reoder the CRTCs,
which would mess up the order, unless we also adjust the iterators
to keep the pipe order. The actual plan is to do both, so technically
we should be able to just remove the WARN and call it a day.
But relying on the iteration order like this is fragile and confusing,
so let's move the "nomodeset" joiner state copy into the later loop
where the "modeset" state copy is also done. The first loop having
completely finished, we are guaranteed to have up to date hw state
on the primary when we do the copy to the secondary.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260408155744.13326-2-ville.syrjala@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On !x86, the pool type is never initialised, and the pages are freed
back to the system.
The test broke on the list_lru rewrite, but I'm not sure how that it was
supposed to work previously. In the meantime CI is broken so reverting
for now.
Fixes: 444e2a19d7 ("ttm/pool: port to list_lru. (v2)")
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260409142658.1511941-2-dev@lankhorst.se
On pool init we should expect the lru_count for each node to be zeroed
as per __list_lru_init -> init_one_lru, but here we are asserting the
opposite.
Currently our CI is blowing up with:
10:23:33] # ttm_device_init_pools: ASSERTION FAILED at drivers/gpu/drm/ttm/tests/ttm_device_test.c:178
[10:23:33] Expected !list_lru_count(&pt.pages) to be false, but is true
[10:23:33] [FAILED] DMA allocations, DMA32 required
[10:23:33] [PASSED] No DMA allocations, DMA32 required
[10:23:33] # ttm_device_init_pools: ASSERTION FAILED at drivers/gpu/drm/ttm/tests/ttm_device_test.c:178
[10:23:33] Expected !list_lru_count(&pt.pages) to be false, but is true
Fixes: 444e2a19d7 ("ttm/pool: port to list_lru. (v2)")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ryszard Knop <ryszard.knop@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260409121512.81298-3-matthew.auld@intel.com
Commit 02f64b2d86 ("drm/vram: drop DRM_VRAM_MM_FILE_OPERATIONS") dropped
DRM_VRAM_MM_FILE_OPERATIONS in preference for using DEFINE_DRM_GEM_OPS.
However, it was not dropped from the kernel docs.
Use DEFINE_DRM_GEM_OPS in the illustration on how to define a
struct file_operations for such a DRM driver and remove any reference
to DRM_VRAM_MM_FILE_OPERATIONS.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 02f64b2d86 ("drm/vram: drop DRM_VRAM_MM_FILE_OPERATIONS")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260408-drm_gem_vram_helper_docs-v1-1-4d667a768f75@igalia.com
The name of the function __drm_fb_helper_initial_config_and_unlock() and
also the comment above that function make it clear that all code paths
in this function should unlock fb_helper->lock before returning. Add a
mutex_unlock() call in the only code path where it is missing. This has
been detected by the Clang thread-safety analyzer.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com> # radeon
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> # msm
Cc: Javier Martinez Canillas <javierm@redhat.com>
Fixes: 63c971af40 ("drm/fb-helper: Allocate and release fb_info in single place")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260403205355.1181984-1-bvanassche@acm.org
Nova (Core):
- Don't create intermediate (mutable) references to the whole command
queue buffer, which is potential undefined behavior.
- Add missing padding to the falcon firmware DMA buffer to prevent DMA
transfers going out of range of the DMA buffer.
- Actually set the default values in the bitfield Default
implementation.
- Use u32::from_le_bytes() instead of manual bit shifts to parse the
PCI ROM header.
- Fix a missing colon in the SEC2 boot debug message.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCadPUOQAKCRBFlHeO1qrK
LgOfAP0ccOjRYuACBcwJHsWio19SmVsuzdCjcSX3S6lPsPaaYAD/QuOLCvbKLPUz
3/8yI+jdw8FL9BfI+MI4gUVQAuehJg4=
=oEBZ
-----END PGP SIGNATURE-----
Merge tag 'drm-rust-next-2026-04-06' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
DRM Rust changes for v7.1-rc1 (2nd)
Nova (Core):
- Don't create intermediate (mutable) references to the whole command
queue buffer, which is potential undefined behavior.
- Add missing padding to the falcon firmware DMA buffer to prevent DMA
transfers going out of range of the DMA buffer.
- Actually set the default values in the bitfield Default
implementation.
- Use u32::from_le_bytes() instead of manual bit shifts to parse the
PCI ROM header.
- Fix a missing colon in the SEC2 boot debug message.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://patch.msgid.link/DHN5GMSIBKO2.2AYOLXDU4X19S@kernel.org
'make htmldocs' complains that dma_fence_unlock_irqrestore() is missing
a description of its @flags parameter. The description is there but it is
missing a ':' sign. Add that and correct the possessive form of "its".
WARNING: ../include/linux/dma-fence.h:414 function parameter 'flags' not described in 'dma_fence_unlock_irqrestore'
Fixes: 3e5067931b ("dma-buf: abstract fence locking v2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20260407043649.2015894-1-rdunlap@infradead.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
This gets the memory sizes from the nodes and stores the limit
as 50% of those. I think eventually we should drop the limits
once we have memcg aware shrinking, but this should be more NUMA
friendly, and I think seems like what people would prefer to
happen on NUMA aware systems.
Cc: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This enable NUMA awareness for the shrinker on the
ttm pools.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The list_lru will now handle numa for us, so no need to keep
separate pool types for it. Just consolidate into the global ones.
This adds a debugfs change to avoid dumping non-existant orders due
to this change.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is an initial port of the TTM pools for
write combined and uncached pages to use the list_lru.
This makes the pool's more NUMA aware and avoids
needing separate NUMA pools (later commit enables this).
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the newly introduced per-node gpu tracking stats,
to track GPU memory allocated via TTM and reclaimable memory in
the TTM page pools.
These stats will be useful later for system information and
later when mem cgroups are integrated.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
While discussing memcg intergration with gpu memory allocations,
it was pointed out that there was no numa/system counters for
GPU memory allocations.
With more integrated memory GPU server systems turning up, and
more requirements for memory tracking it seems we should start
closing the gap.
Add two counters to track GPU per-node system memory allocations.
The first is currently allocated to GPU objects, and the second
is for memory that is stored in GPU page pools that can be reclaimed,
by the shrinker.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmnS4Y8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGe6AIAI4rjLLPlxUKQbx4
JP9lsKH7vqeIVvuMqzFau7+B8ngJ+80OESnBF7n43oNEqdJ0NYiL+rPtcGgBjZDP
yUu5DlzVSxpAIQBZe2Nc0dz/5NbT9QxKyC5Yl/whpNIR7UHx1RFvDJYxwN9xKxTw
ggLQevKAnHrKjIOKjq70Yqz2T1JMXc9Wp/xpur0oGioiFW/lH24CgHDXjE2Ka9oD
wqhotzThuSaaVDmqZ8WNFKxx2onR4r8/NpljaVT2mWRJ2+IMF4pMOBJZRQiNZtRa
1CsoJ3aV6pslAsuC1dLboCMul48VUgyu7l3xQwXVuA5bRO1jqt5ILWC10g09OItU
7CxGTno=
=1TRg
-----END PGP SIGNATURE-----
Merge v7.0-rc7 into drm-next
Thomas Zimmermann needs 2f42c1a616 ("drm/ast: dp501: Fix
initialization of SCU2C") for drm-misc-next.
Conflicts:
- drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c
Just between e927b36ae1 ("drm/amd/display: Fix NULL pointer
dereference in dcn401_init_hw()") and it's cherry-pick that confused
git.
- drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
Deleted in 6b0a611628 ("drm/amd/pm: Unify version check in SMUv11")
but some cherry-picks confused git. Same for v12/v14.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules, similar
to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAmnSgysACgkQx4+xDQu9
KksznQ//UKuNcpTgGoTOSAi9m5XrLNG7B0Z2Es5n3IuuFLeX4uFwD8pJjUouAqja
Y89HKHcbuawAZLxoEj5QImbFxyM6zgdA24R2kM76+Ds5nMM4hetL1hR1Gphs1ghs
Vg/klLkSQ/QkV8xTZlWe9A3s96PeiYKgwQUYdENjL/OXWjTbi4Ho/EQYjsXWGyuc
sGkWVbGeqPhNlv8bMcA11kM8rCsvyhFnAC5yIbmybmup6ObzS1tEnOXodp1jVDlZ
TPzi7SyjSLiTbsaJGZ1O5oFXSrr8zBLFt2RinR7rUt/8Aq8c5xSSvK9n808jytNP
ubIgqWjW3wGjzbZfQw4WhOIihtAsp2VssWZlt1p0Q7EGOx0g+/zMA6Uq1VVIuEML
+Xm6BwxLFm43NDSa7HPtytCoN/qqIQmiRkiLAG7WHL3mSkYDXYjTXZxTmp0awJ8R
WTlZsQFQlnNd8VydP++cwqi/lCPPqWqZbc8ys0lLt57+oe6eE91W3a4jXnIn/5YR
dtHLdmHF6xG3pVdilEfFgH7CkA1DMlFox5qQRFx4lLWBY7tTEY1S2o1tmIG1zqKd
QTcaO1VbuobTLAy06kD8XNUNh8jzW0zedk37BcxA+J+1B59c0N9J7rW8rkRYu4Le
eeIy9p8kPWUB/JfcMY+6jKUjZgQL9un8M4PpVZ/uWJDxQVDJcRs=
=d0PH
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules,
similar to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
* tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
ACPI: RIMT: Add dependency between iommu and devices
selftests: riscv: Add braces around EXPECT_EQ()
riscv: use _BITUL macro rather than BIT() in ptrace uapi and kselftests
riscv: Reset pmm when PR_TAGGED_ADDR_ENABLE is not set
riscv: make runtime const not usable by modules
riscv: patch: Avoid early phys_to_page()
riscv: kgdb: fix several debug register assignment bugs
In eb_lookup_vma(), the code checks that the context vm matches before
incrementing the i915 vma usage count, but for the non-matching case it
didn't clear the non-matching vma pointer, so it would then mistakenly
be returned, causing potential UaF and refcount issues.
Reported-by: Yassine Mounir <sosohero200@gmail.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix allocation in TLB uniquification
Fix SiByte cache initialisation
Check uart parameters from firmware on Loongson64 systems
Fix clock id mismatch for Ralink SoCs
Fix GCC version check for __mutli3 workaround
-----BEGIN PGP SIGNATURE-----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=1q4p
-----END PGP SIGNATURE-----
Merge tag 'mips-fixes_7.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix TLB uniquification for systems with TLB not initialised by
firmware
- Fix allocation in TLB uniquification
- Fix SiByte cache initialisation
- Check uart parameters from firmware on Loongson64 systems
- Fix clock id mismatch for Ralink SoCs
- Fix GCC version check for __mutli3 workaround
* tag 'mips-fixes_7.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: mm: Allocate tlb_vpn array atomically
MIPS: mm: Rewrite TLB uniquification for the hidden bit feature
MIPS: mm: Suppress TLB uniquification on EHINV hardware
MIPS: Always record SEGBITS in cpu_data.vmbits
MIPS: Fix the GCC version check for `__multi3' workaround
MIPS: SiByte: Bring back cache initialisation
mips: ralink: update CPU clock index
MIPS: Loongson64: env: Check UARTs passed by LEFI cautiously
Here are a relativly large number of small char/misc/iio and other
driver fixes for 7.0-rc7. There's a bunch, but overall they are all
small fixes for issues that people have been having that I finally
caught up with getting merged due to delays on my end.
The "largest" change overall is just some documentation updates to the
security-bugs.rst file to hopefully tell the AI tools (and any users
that actually read the documentation), how to send us better security
bug reports as the quantity of reports these past few weeks has
increased dramatically due to tools getting better at "finding" things.
Included in here are:
- lots of small IIO driver fixes for issues reported in 7.0-rc
- gpib driver fixes
- comedi driver fixes
- interconnect driver fix
- nvmem driver fixes
- mei driver fix
- counter driver fix
- binder rust driver fixes
- some other small misc driver fixes
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCadIaEg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym34ACfTtx3DzFMxNmE2eQrvptvqmSeVEoAoIt9h9kF
pVDpO6Njqetq0zzWfBL3
=uv/h
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are a relativly large number of small char/misc/iio and other
driver fixes for 7.0-rc7. There's a bunch, but overall they are all
small fixes for issues that people have been having that I finally
caught up with getting merged due to delays on my end.
The "largest" change overall is just some documentation updates to the
security-bugs.rst file to hopefully tell the AI tools (and any users
that actually read the documentation), how to send us better security
bug reports as the quantity of reports these past few weeks has
increased dramatically due to tools getting better at "finding"
things.
Included in here are:
- lots of small IIO driver fixes for issues reported in 7.0-rc
- gpib driver fixes
- comedi driver fixes
- interconnect driver fix
- nvmem driver fixes
- mei driver fix
- counter driver fix
- binder rust driver fixes
- some other small misc driver fixes
All of these have been in linux-next this week with no reported issues"
* tag 'char-misc-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (63 commits)
Documentation: fix two typos in latest update to the security report howto
Documentation: clarify the mandatory and desirable info for security reports
Documentation: explain how to find maintainers addresses for security reports
Documentation: minor updates to the security contacts
.get_maintainer.ignore: add myself
nvmem: zynqmp_nvmem: Fix buffer size in DMA and memcpy
nvmem: imx: assign nvmem_cell_info::raw_len
misc: fastrpc: check qcom_scm_assign_mem() return in rpmsg_probe
misc: fastrpc: possible double-free of cctx->remote_heap
comedi: dt2815: add hardware detection to prevent crash
comedi: runflags cannot determine whether to reclaim chanlist
comedi: Reinit dev->spinlock between attachments to low-level drivers
comedi: me_daq: Fix potential overrun of firmware buffer
comedi: me4000: Fix potential overrun of firmware buffer
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
gpib: fix use-after-free in IO ioctl handlers
gpib: lpvo_usb: fix memory leak on disconnect
gpib: Fix fluke driver s390 compile issue
lis3lv02d: Omit IRQF_ONESHOT if no threaded handler is provided
lis3lv02d: fix kernel-doc warnings
...
Here are 2 small tty vt fixes for 7.0-rc7 to resolve some reported
issues with the resize ability of the alt screen buffer. Both of these
have been in linux-next all week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCadIatA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqVQCfecM0mxjbI8EmKsfL6FtpAstcW1IAn2XwT7S0
ITAhHAylAuh3HHpXqRfi
=eulV
-----END PGP SIGNATURE-----
Merge tag 'tty-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two small tty vt fixes for 7.0-rc7 to resolve some reported
issues with the resize ability of the alt screen buffer. Both of these
have been in linux-next all week with no reported issues"
* tag 'tty-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: resize saved unicode buffer on alt screen exit after resize
vt: discard stale unicode buffer on alt screen exit after resize
Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout to
Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here.)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding and
unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCadIdow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylTVQCfYg21ERvg753HnW1zbnzjMFlJZTQAoL+/0zeH
VcNijzt/8uiEKvQWAhcB
=BcZf
-----END PGP SIGNATURE-----
Merge tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout
to Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding
and unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little
beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems"
* tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
usb: host: xhci-sideband: delegate offload_usage tracking to class drivers
usb: core: use dedicated spinlock for offload state
usb: cdns3: gadget: fix state inconsistency on gadget init failure
usb: dwc3: imx8mp: fix memory leak on probe failure path
usb: gadget: f_uac1_legacy: validate control request size
usb: ulpi: fix double free in ulpi_register_interface() error path
usb: misc: usbio: Fix URB memory leak on submit failure
USB: core: add NO_LPM quirk for Razer Kiyo Pro webcam
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
usb: core: phy: avoid double use of 'usb3-phy'
USB: serial: option: add MeiG Smart SRM825WN
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
usb: gadget: f_subset: Fix net_device lifecycle with device_move
usb: gadget: f_eem: Fix net_device lifecycle with device_move
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
usb: gadget: u_ncm: Add kernel-doc comments for struct f_ncm_opts
usb: gadget: f_rndis: Protect RNDIS options with mutex
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
dt-bindings: connector: add pd-disable dependency
...
Clippy fires two clippy::precedence warnings on the manual
byte-shifting expression:
warning: operator precedence can trip the unwary
--> drivers/gpu/nova-core/vbios.rs:511:17
|
511 | / u32::from(data[29]) << 24
512 | | | u32::from(data[28]) << 16
513 | | | u32::from(data[27]) << 8
| |______________________________________________^
Clear the warnings by replacing manual byte-shifting with
u32::from_le_bytes(). Using from_le_bytes() is also a tiny code
improvement, because it uses less code and is clearer about the intent.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260404212831.78971-2-jhubbard@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The current implementation does not actually set the default values for
the fields in the bitfield.
Fixes: 3fa145bef5 ("gpu: nova-core: register: generate correct `Default` implementation")
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260401-fix-bitfield-v2-1-2fa68c98114a@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Commit a88831502c ("gpu: nova-core: falcon: use dma::Coherent")
dropped the nova-local `DmaObject` device memory type for the
kernel-global `Coherent` one.
This switch had a side-effect: `DmaObject` always aligned the requested
size to `PAGE_SIZE`, and also reported that adjusted size when queried.
`Coherent`, on the other hand, does page-align allocation sizes but only
allows CPU access on the exact size provided by the caller.
This change runs into a limitation of falcon DMA copies, namely that DMA
accesses are done on blocks of exactly 256 bytes. If the provided data
does not have a length that is a multiple of 256, `dma_wr` returns
an error.
It was expected that all firmwares would present the proper adjusted
size, but this is not the case at least on my GA107:
NovaCore 0000:08:00.0: DMA transfer goes beyond range of DMA object
NovaCore 0000:08:00.0: Failed to load FWSEC firmware: EINVAL
NovaCore 0000:08:00.0: probe with driver NovaCore failed with error -22
Fix this by padding the `Coherent`'s size to `MEM_BLOCK_ALIGNMENT` (i.e.
256) when allocating it and filling it with zeroes, before copying the
firmware on top of it.
Fixes: a88831502c ("gpu: nova-core: falcon: use dma::Coherent")
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260405-falcon-dma-roundup-v2-1-4af5b2ff9c16@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
`driver_read_area` and `driver_write_area` are internal methods that
return slices containing the area of the command queue buffer that the
driver has exclusive read or write access, respectively.
While their returned value is correct and safe to use, internally they
temporarily create a reference to the whole command-buffer slice,
including GSP-owned regions. These regions can change without notice,
and thus creating a slice to them, even if never accessed, is undefined
behavior.
Fix this by making these methods create slices to valid regions only.
Fixes: 75f6b1de81 ("gpu: nova-core: gsp: Add GSP command queue bindings and handling")
Reported-by: Danilo Krummrich <dakr@kernel.org>
Closes: https://lore.kernel.org/all/DH47AVPEKN06.3BERUSJIB4M1R@kernel.org/
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260404-cmdq-ub-fix-v5-1-53d21f4752f5@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
EPROBE_DEFER ensures IOMMU devices are probed before the devices that
depend on them. During shutdown, however, the IOMMU may be removed
first, leading to issues. To avoid this, a device link is added
which enforces the correct removal order.
Fixes: 8f77295525 ("ACPI: RISC-V: Add support for RIMT")
Signed-off-by: Sunil V L <sunilvl@oss.qualcomm.com>
Link: https://patch.msgid.link/20260303061605.722949-1-sunilvl@oss.qualcomm.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
EXPECT_EQ() expands to multiple lines, breaking up one-line if
statements. This issue was not present in the patch on the mailing list
but was instead introduced by the maintainer when attempting to fix up
checkpatch warnings. Add braces around EXPECT_EQ() to avoid the error
even though checkpatch suggests them to be removed:
validate_v_ptrace.c:626:17: error: ‘else’ without a previous ‘if’
Fixes: 3789d5eecd ("selftests: riscv: verify syscalls discard vector context")
Fixes: 30eb191c89 ("selftests: riscv: verify ptrace rejects invalid vector csr inputs")
Fixes: 849f05ae1e ("selftests: riscv: verify ptrace accepts valid vector csr values")
Signed-off-by: Charlie Jenkins <thecharlesjenkins@gmail.com>
Reviewed-and-tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Link: https://patch.msgid.link/20260309-fix_selftests-v2-2-9d5a553a531e@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
