Cover the new TCA_HHF_HH_FLOWS_LIMIT bound: values above 2*HH_FLOWS_CNT
(4294967295, 65536, 2049) are rejected with the configured limit left
untouched on both the change and the add path, the boundary value 2048 is
accepted (installed at 100 first so the boundary change is load-bearing),
and an add-time hh_limit 500 is preserved instead of being clobbered by
the default.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: hybris <hybris@mojatatu.ai>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/QDISC-B855.v1.20260911153152@mojatatu.com.2
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hhf_change() stores TCA_HHF_HH_FLOWS_LIMIT with no upper bound. A huge
hh_flows_limit lets each new heavy-hitter flow pass the
hh_flows_current_cnt check in alloc_new_hh() and forces a fixed-size
kzalloc(GFP_ATOMIC) per flow under spoofed traffic, for unbounded memory
growth.
Bound the attribute with NLA_POLICY_MAX() at 2*HH_FLOWS_CNT (the
hhf_init() default) and report the rejected value via extack. The
deprecated nested parse is kept: legacy tc does not set NLA_F_NESTED on
TCA_OPTIONS. Configs relying on hh_limit above the default were relying
on unbounded, unsafe behaviour and are not supported going forward.
hhf_init() also ran hhf_change() before setting the default
hh_flows_limit, so a user-supplied hh_limit at add time was clobbered
back to 2048. Set the default before hhf_change() so the configured
value sticks.
This is a follow-up to commit eb56a495f5 ("net/sched: hhf: clamp
quantum in change and init paths"), which bounded the quantum of the
same qdisc; the hh_flows_limit bound is the remaining unbounded knob of
that series' scope.
Conditions to recreate the bug: CAP_NET_ADMIN in a user namespace;
tc qdisc change dev X root hhf hh_limit 4294967295 succeeds and the
value is echoed by tc qdisc show, unbounding heavy-hitter flow
allocations; also tc qdisc add dev X root hhf hh_limit 500 stores 2048
instead of 500.
Fixes: 10239edf86 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Cc: stable@vger.kernel.org
Reported-by: Sashiko (gemini) <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260822195509.112717-1-jhs@mojatatu.com
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: hybris <hybris@mojatatu.ai>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/QDISC-B855.v1.20260911153152@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferred callback will be late and will see the updated state.
Fixes: 3a7c1661ae ("net: bridge: mst: fix vlan use-after-free")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260911105021.1385934-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without
checking netif_running(). ResetAdapter() first calls card_stop(), which
sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(),
which walks the two transmit queues:
for (i = QUEUE_S; i <= QUEUE_A0; i++) {
queue = smc->hw.fp.tx[i] ;
...
t = queue->tx_curr_get ;
smc->hw.fp.tx[] is only populated by init_tx(), which is reached from
skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() ->
init_mac() -> init_tx(). The private area is allocated and zeroed by
alloc_fddidev(), so on an interface that has never been brought up both
queue pointers are still NULL. The hw_state test at the top of
mac_drv_clear_tx_queue() does not catch this, because card_stop() has
just set STOPPED; the function proceeds into the loop and dereferences
NULL. ResetAdapter() does call init_smt() itself, but only after the
queues have been cleared.
Setting the MAC address on a down interface therefore oopses:
ip link set dev fddi0 address 02:00:00:00:00:01
BUG: KASAN: null-ptr-deref in mac_drv_clear_tx_queue+0x68/0x2c0 [skfp]
Read of size 8 at addr 0000000000000010 by task ip/302
Call Trace:
<TASK>
mac_drv_clear_tx_queue+0x68/0x2c0 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b]
ResetAdapter+0x29/0x100 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b]
skfp_ctl_set_mac_address+0x57/0x80 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b]
netif_set_mac_address+0x1e4/0x2c0
do_setlink+0x684/0x2680
</TASK>
Address 0x10 is the offset of tx_curr_get, the third pointer in
struct s_smt_tx_queue, on 64-bit. mac_drv_clear_rx_queue(), which
ResetAdapter() calls immediately afterwards, dereferences
smc->hw.fp.rx[QUEUE_R1] in the same way behind the same ineffective
hw_state test; the transmit queue merely crashes first. Both are
covered by the guard below.
Skip the adapter reset when the interface is down. dev_addr_set() is
left unconditional, so the new address is still recorded in
dev->dev_addr. Nothing is lost by not resetting the adapter here:
skfp_open() deliberately re-reads the factory address on every open,
read_address(smc, NULL);
eth_hw_addr_set(dev, smc->hw.fddi_canon_addr.a);
and the comment above it states this is done to discard exactly such an
address override across a close/open cycle. An address set while the
interface is down could not have survived the following open even
before this change, so the guard removes no working behaviour. Guarding
the hardware side of ndo_set_mac_address() with netif_running() is
established practice; skge_set_mac_address() has done so since commit
2eb3e621c4 ("skge: set mac address bonding fix").
Guarding the reset as a whole, rather than NULL-checking the queues, is
also what the rest of the driver expects. After a previous open/close
the queue pointers are stale but non-NULL, so there is no crash, yet
ResetAdapter() goes on to call smt_online() and STI_FBI() ("Enable
Board Interrupts") while skfp_close() has already called free_irq() -
the adapter would be brought back online with no handler installed. The
only other ResetAdapter() caller is skfp_interrupt(), which by
construction runs only while the device is open.
Found by automated driver testing against an emulated SysKonnect FDDI
adapter under a KASAN-enabled 7.0.0 kernel. Triggering it requires
CAP_NET_ADMIN.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Assisted-by: LLM KASAN
Signed-off-by: Hohyun Sim <tlaghgus0425@korea.ac.kr>
Link: https://patch.msgid.link/20260910063743.110747-1-tlaghgus0425@korea.ac.kr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the forward output route cannot be used in icmp_route_lookup(),
it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr,
the original packet's source address.
ip_route_input() only returns an error for truly invalid packets. For
unreachable addresses it will succeed and return an input route whose
dst.output is set to ip_rt_bug(). The existing check only rejects
RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned
and later used for output, syzkaller triggering a WARN_ON_ONCE()
in ip_rt_bug() as bellow:
------------[ cut here ]------------
WARNING: net/ipv4/route.c:1273 at ip_rt_bug+0x14/0x20
RIP: 0010:ip_rt_bug+0x14/0x20
Call Trace:
ip_push_pending_frames+0xfa/0x100
__icmp_send+0x905/0xf10
ip_options_compile+0xc0/0xd0
ip_rcv_finish_core+0x321/0xae0
ip_rcv+0x1de/0x260
__netif_receive_skb_one_core+0x11a/0x130
netif_receive_skb+0x7b/0x260
tun_get_user+0x11bf/0x1c10
------------[ cut here ]------------
Reject input route that is RTN_UNREACHABLE to fix it. The net warning
is only printed for RTN_LOCAL, as RTN_UNREACHABLE is not the result of
a race condition.
Fixes: 8b7817f3a9 ("[IPSEC]: Add ICMP host relookup support")
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Link: https://patch.msgid.link/20260910140042.1880242-1-dongchenchen2@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bcmgenet_hfb_init() runs INIT_LIST_HEAD() on priv->rxnfc_list, which drops
every rule off the list, and bcmgenet_open() calls it on each ifup. Every
rule the user configured is silently lost:
# ethtool -N eth0 flow-type ether dst $MAC action 0
Added rule with ID 0
# ethtool -n eth0 | grep -c Filter:
1
# ip link set eth0 down && ip link set eth0 up
# ethtool -n eth0 | grep -c Filter:
0
Initialise the lists once at probe and restore the rules on open, as
bcmgenet_resume() already does.
Fixes: 3e37095228 ("net: bcmgenet: add support for ethtool rxnfc flows")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260913190052.939955-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and
nothing stops it until dsa_register_switch() has returned an error to
mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a
poll that fires once .setup or a later step of dsa_tree_setup() has
failed walks freed ports. On shutdown the user ports stay registered,
and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic
with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag
before it was set queues the poll after cancel_delayed_work_sync() has
returned.
Arm the poll once .setup has succeeded and stop it from a .teardown op,
which DSA calls on unregister and after a failed registration, in both
cases before it frees the ports. Use disable_delayed_work_sync() there
and in shutdown(): it drains a running poll as the cancel did and turns
every later attempt to queue the work into a no-op, so the re-arm
cannot bring the poll back. remove() and the probe error path only set
WORK_STOPPED, which crc_err_work tests before it walks the ports.
Fixes: a21d33a526 ("net: dsa: mxl862xx: implement .get_stats64")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/1eb6f7fc1789b67e4b11e3f4d5ff080d0b6f7cbb.1789045590.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an SRv6 packet arrives on an interface enslaved to a VRF,
vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate()
has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the
common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of
a reassembled outer packet could even set it, with no VRF involved.
Commit 44930446dd ("ipv6: seg6: clear IPv4 control block on IPIP
decapsulation") then made the unreliable bit reliably clear.
The effect of the missing flag is visible with End.DX4 when a
delivery to a local address of the node reaches the socket lookup.
For example, a UDP socket bound to the enslaved ingress interface
does not receive any of the decapsulated packets, while an unbound
socket outside the VRF does.
This contradicts Documentation/networking/vrf.rst: by default the
scope of an unbound UDP or TCP socket is limited to the default VRF.
Set IPSKB_L3SLAVE for IPv4 in decap_and_validate(), which already does
the same for IPv6. The socket lookup then matches the decapsulated
packet like any other packet received on that enslaved interface. Such
a packet matches an unbound UDP or TCP socket only when
udp_l3mdev_accept or tcp_l3mdev_accept is set.
Fixes: 891ef8dd2a ("ipv6: sr: implement additional seg6local actions")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260913194421.31-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mtk_phy_led_hw_ctrl_get() reports TRIGGER_NETDEV_LINK whenever any of the
speed bits in on_set is on, and in addition reports every individual
TRIGGER_NETDEV_LINK_* bit that is set. The netdev trigger refuses that
combination: netdev_led_attr_store() rejects TRIGGER_NETDEV_LINK together
with any per-speed rule, and it validates the whole resulting mode rather
than just the bit being written. Once the hardware has any link bit
programmed, every write to the trigger attributes of that LED therefore
fails with -EINVAL and the LED can no longer be configured.
The rules are also fed back into the hardware: the trigger stores what is
read back, and a later write of device_name programs it again, expanding
TRIGGER_NETDEV_LINK to every speed in on_set. An LED configured for a
single speed is thereby silently widened to "on at any link speed".
Both are easy to see on the EcoNet EN7528, whose four PHYs share one LED
block. The first LED programs the block correctly, the second reads those
rules back and rewrites them widened, and the remaining two then read the
widened value, so an LED configured for "link_10 link_100" ends up lit on a
1000 Mbps link.
on_set holds every speed the LED can indicate and is exactly what
mtk_phy_led_hw_ctrl_set() programs for TRIGGER_NETDEV_LINK, so report the
speed independent rule only when all of them are on, and the individual
speeds otherwise. The mapping is then the inverse of the one used when
programming the LED and round trips without changing the register.
Fixes: c66937b0f8 ("net: phy: mediatek-ge-soc: support PHY LEDs")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260912134306.3544329-1-naseefkm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hand-written bitfield offsets in is_link_up(), is_autoneg_enabled()
and is_autoneg_completed() were correct when the abstraction was
merged: at that time autoneg, link, and autoneg_complete were at bits
13, 14, and 15 of struct phy_device's first bitfield unit. Commit
2796ff1e3d ("net: phy: add flag is_genphy_driven to struct phy_device")
later inserted is_genphy_driven just before autoneg, shifting the three
fields up by one, so the accessors now read:
is_link_up() reads bit 14 = autoneg
is_autoneg_enabled() reads bit 13 = is_genphy_driven
is_autoneg_completed() reads bit 15 = link
The official ax88796b Rust driver uses all three accessors in its
read_status() implementation, so it inherits the bug.
phy_attach_direct() sets is_genphy_driven only when it falls back to
the generic driver, and ax88796b has a real driver, so
is_genphy_driven stays 0. The broken is_autoneg_enabled() therefore
reads bit 13 as 0, compares it against AUTONEG_ENABLE (1), and always
returns false, so read_status() never reaches the
resolve_aneg_linkmode() call.
The ordinary bindgen accessors take &self. Calling them through
(*phydev).link() would create a shared reference to the complete
bindings::phy_device, which is not appropriate for an object wrapped in
Opaque.
Use the bindgen-generated raw accessors (link_raw(), autoneg_raw(),
and autoneg_complete_raw()) instead. They retain the bit positions and
endianness handling generated from the C layout without creating a Rust
reference to the complete phy_device. Drop the hand-written numbers
together with the TODO comment that marked them as a stopgap.
The raw accessors are only emitted by bindgen 0.71 and later, and were
added at the Rust-for-Linux project's request, so this fix can only be
backported to stable branches whose minimum bindgen version is at least
that, hence the scope on the Cc: stable line below.
Found by a static equivalence audit (C2RustDrv, a C-to-Rust driver
migration tool) that compares hand-written bitfield offsets against
the bindgen layout of struct phy_device. Verified by building the
bindings and checking the generated accessors; no runtime testing was
possible without PHY hardware.
Fixes: 2796ff1e3d ("net: phy: add flag is_genphy_driven to struct phy_device")
Cc: stable@vger.kernel.org # Only 7.1.y and later (requires bindgen's raw pointer accessors).
Link: https://github.com/rust-lang/rust-bindgen/issues/2674
Signed-off-by: Chunfeng Song <springbreeze@stu.pku.edu.cn>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20260910055110.167110-1-springbreeze@stu.pku.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_ib_cm_connect_complete() runs from the RDMA-CM event handler with
conn->c_cm_lock held. When the peer negotiates a protocol version
older than RDS_PROTOCOL_COMPAT_VERSION, the handler calls
rds_conn_destroy(), which is only safe in the rmmod path: it
synchronously tears the connection down and flush_work()es the
shutdown work cp_down_w.
That shutdown work (rds_conn_shutdown()) needs cp_cm_lock, which is
the very lock the event handler still holds, so the flush never
completes: the two workers wait on each other and the RDS connection
workqueues stall for good.
All other RDMA-CM failure paths (REJECTED, CONNECT_ERROR,
DISCONNECTED) use rds_conn_drop(), which marks the connection
RDS_CONN_ERROR and schedules the shutdown work asynchronously. Use
it here as well.
Fixes: f147dd9eca ("RDS/IB: Disallow connections less than RDS 3.1")
Reported-by: TencentOS Corvus AI <corvus@tencent.com>
Cc: stable@vger.kernel.org
Reviewed-by: Allison Henderson <achender@kernel.org>
Signed-off-by: Aohan Mei <henrymei@tencent.com>
Link: https://patch.msgid.link/20260911073436.3542080-1-ljp1205831794@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=H3Kp
-----END PGP SIGNATURE-----
Merge tag 'nf-26-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix KMSAN reports an uninit-value in nf_nat_setup_info() for netmap,
from Theodor Arsenij Larionov Trichkine.
2) Restrict deletion of netdevice in basechain and flowtable to exact
matching only, from Fernando F. Mancera.
3) Fix nf_nat_register_fn() error path allowing for a memleak.
4) Hold reference on ct until flow is released to address, otherwise
access to release ct->ext or different ct due to typesafe RCU
semantics.
* tag 'nf-26-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable: hold reference on ct until flow is released
netfilter: nf_nat: unregister and release hooks on error
netfilter: nf_tables: fix device name and prefix match in hook lookup
netfilter: nft_nat: fully initialise new_addr in netmap setup
====================
Link: https://patch.msgid.link/20260913205447.1889203-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
neighbour: Small fixes for RTM_{GET,SET}NEIGHTBL.
While working on the follow-up suggested here,
https://lore.kernel.org/20260902143023.GA3966681@shredder
I found a few bugs in RTM_GETNEIGHTBL and RTM_SETNEIGHTBL,
which this series fixes.
Patch 1, 3, 4 will conflict with net-next in neightbl_dump_info()
due to removal of net_eq() below:
p = list_next_entry(&tbl->parms, list);
list_for_each_entry_from_rcu(p, &tbl->parms_list, list) {
if (!net_eq(neigh_parms_net(p), net))
continue;
Note also that currently neigh_proc_dointvec_ms_jiffies_positive()
is buggy and does not enforce min/max, and it needs this fix:
https://lore.kernel.org/20260905233819.1064529-2-kuniyu@google.com
====================
Link: https://patch.msgid.link/20260909233143.2401847-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
neightbl_dump_info() calls neightbl_fill_info() in each loop
to render the default parms.
If there are many devices and neightbl_fill_param_info() failed,
neightbl_fill_info() is called again when the dump resumes:
# ynl --family rt-neigh --dump getneightbl --output-json |
jq '.[] | {name: .name, ifindex: .parms.ifindex}'
...
{
"name": "ndisc_cache",
"ifindex": null
}
...
{
"name": "ndisc_cache",
"ifindex": 6
}
{
"name": "ndisc_cache",
"ifindex": null
}
{
"name": "ndisc_cache",
"ifindex": 5
}
Let's skip neightbl_fill_info() if it is already called in
neightbl_dump_info().
Note that we cannot use !neigh_skip instead of !default_skip
because default_skip == 1 && neigh_skip == 0 could be true
if the first neightbl_fill_param_info() fails.
Also, nidx must be cleared at the end of each table loop;
otherwise, if neightbl_fill_info() for a subsequent table
fails, the leftover nidx from the previous table would be
saved in cb->args[1], resulting in erroneously skipping parms
of the subsequent table in the next dump.
Fixes: c7fb64db00 ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260909233143.2401847-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commits started to initialise blackhole_netdev with
neigh_parms_alloc().
This is visible in init_net as the ifindex==0 entries via
RTM_GETNEIGHTBL:
# ynl --family rt-neigh --dump getneightbl --output-json \
| jq '.[] | select(.parms.ifindex == 0)
| {name: .name, ifindex: .parms.ifindex}'
{
"name": "arp_cache",
"ifindex": 0
}
{
"name": "ndisc_cache",
"ifindex": 0
}
For RTM_SETNEIGHTBL, ifindex being 0 means wildcard.
Let's skip blackhole_netdev's parms in neightbl_dump_info().
Note that lookup_neigh_parms() does not need the same change
because the default parms is always the first entry and matches
with ifindex == 0.
Fixes: e5f80fcf86 ("ipv6: give an IPv6 dev to blackhole_netdev")
Fixes: 22600596b6 ("ipv4: give an IPv4 dev to blackhole_netdev")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260909233143.2401847-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NDTPA_INTERVAL_PROBE_TIME_MS sets .type and .min but misses
.validation_type, so no validation is applied:
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 0}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
Moreover, nla_get_msecs() uses msecs_to_jiffies(), and u64 is
silently cast to u32, so a larger value can bypass the min check:
e.g. 4294967296 == 0x100000000
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 4294967296}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
msecs_to_jiffies() returns MAX_JIFFY_OFFSET if the value is
larger than INT_MAX. Also, INT_MAX ms overflows int NEIGH_VAR()
when HZ > 1000 (Alpha, MIPS), and passing a negative integer to
queue_delayed_work(unsigned long delay) causes sign extension,
which wraps around the expiry time to the past, resulting in it
being handled as 0 delay in the timer wheel.
Let's use NLA_POLICY_FULL_RANGE() and limit the max to 1 day.
The same max check is applied to sysctl as well.
Note that this controls the probe interval for NTF_MANAGED
entries, so the max of 1 day is unlikely to break any
deployments.
Fixes: 211da42eaa ("net, neigh: introduce interval_probe_time_ms for periodic probe")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260909233143.2401847-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
neightbl_dump_info() fetches the first non-default neigh_parms
with list_next_entry(&tbl->parms, ...) and iterates through the
list with list_for_each_entry_from_rcu().
However, list_next_entry() does not use RCU helper.
Let's use list_for_each_entry_rcu() and skip the default parms.
Fixes: 4ae34be500 ("neighbour: Convert RTM_GETNEIGHTBL to RCU.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260909233143.2401847-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nf_ct_put() releases the ct->ext area inmediately, the rcu typesafe
semantics also allow to refer to the wrong conntrack from the flowtable
datapath. Hold reference on ct until flow is released after rcu grace
period.
Add rcu_barrier() on module exit path, to ensure pending flow entries
are release before module goes away.
Fixes: 0ff90b6c20 ("netfilter: nf_flow_offload: fix use-after-free and a resource leak")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If nf_hook_entries_insert_raw() fails, the NAT hooks get never released,
resulting in a memleak.
Postpone setting nat_proto_net->nat_hook_ops when the hooks are
registered to simplify the error path to decide whether the nat hooks
need unwinding.
Fixes: 1cd472bf03 ("netfilter: nf_nat: add nat hook register functions to nf_nat")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently, a netdev chain or flowtable hooked to a device prefix can be
unintentionally deleted by a control-plane request targeting an exact
device name or even a shorter one due to the usage of min() to calculate
the length to match.
Fix this by making sure an exact device match never matches a prefix and
that both the target and the candidate have the same length during
delete operation. The add and update paths retain the existing overlap
matching to prevent a single device from matching multiple hooks.
Reported-by: Wei Fang <void0red@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/CANE+tVrDeNCHQVmsqkV2ozeBqyE3GtRDMhZgsg1bhw10yGNTRQ@mail.gmail.com/
Fixes: 6d07a28950 ("netfilter: nf_tables: Support wildcard netdev hook specs")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_nat_setup_netmap() builds the mapped address in an on-stack
union nf_inet_addr. For an IPv4 mapping it writes only the 4-byte .ip
member and the loop runs a single 32-bit iteration, but it then copies
the whole 16-byte union into range->min_addr and range->max_addr, so the
upper 12 bytes reach nf_nat_setup_info() uninitialised.
KMSAN reports an uninit-value in nf_nat_setup_info() reached from
nft_nat_eval(). The IPv6 path fills all 16 bytes and is not affected.
Zero-initialise new_addr.
Fixes: 3ff7ddb135 ("netfilter: nft_nat: add netmap support")
Signed-off-by: Theodor Arsenij Larionov Trichkine <theodorlarionov@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Including fixes from Netfilter, Bluetooth and WPAN.
Current release - new code bugs:
- Bluetooth: hci_sync: fix not setting CE length properly
- eth: enic: match mailbox replies to request numbers
Previous releases - regressions:
- tunnels: drop stale dst when building an ICMP error for PMTUD
- ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings()
(bug in the rtnl_lock -> RCU conversion)
- eth: bnxt_en: fix crashes on Thor2 due to OOB coalescing buffer accesses
- eth: bnxt_en: prevent queue stop with deferred completions
Previous releases - always broken:
- eth: ice: don't dereference pointers from TP_printk()
- eth: fix OOB writes on ethtool flow rule dump in 3 drivers
- eth: mlx5: fix FEC configuration with RS_544_514_INTERLEAVED_QUAD
- dsa: tag_brcm: legacy FCS: request needed tailroom
Misc:
- net: cap tx_queue_len at S16_MAX to prevent oversized ring alloc
- ipv6: flowlabel: cap duplicate leases per socket
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=f9J9
-----END PGP SIGNATURE-----
Merge tag 'net-7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Nothing too exciting, usual stream of fixes. Including fixes from
Netfilter, Bluetooth and WPAN.
Current release - new code bugs:
- Bluetooth: hci_sync: fix not setting CE length properly
- eth: enic: match mailbox replies to request numbers
Previous releases - regressions:
- tunnels: drop stale dst when building an ICMP error for PMTUD
- ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings()
(bug in the rtnl_lock -> RCU conversion)
- eth: bnxt_en:
- fix crashes on Thor2 due to OOB coalescing buffer accesses
- prevent queue stop with deferred completions
Previous releases - always broken:
- eth:
- ice: don't dereference pointers from TP_printk()
- fix OOB writes on ethtool flow rule dump in 3 drivers
- mlx5: fix FEC configuration with RS_544_514_INTERLEAVED_QUAD
- dsa: tag_brcm: legacy FCS: request needed tailroom
Misc:
- net: cap tx_queue_len at S16_MAX to prevent oversized ring alloc
- ipv6: flowlabel: cap duplicate leases per socket"
* tag 'net-7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (164 commits)
selftests: tc-testing: test action batch failure cleanup
net/sched: act_api: release all action references on NEWACTION failure
openvswitch: fix wrong flag value in get_ipv6_ext_hdrs()
ipmr: account multicast table and route memory
net: phy: dp83td510: handle the active-high LED polarity mode
net: macb: initialize PTP state before registering clock
net: hsr: enable promiscuous mode on interlink port with fwd offload
ipv6: fix fib6 walker UAF on seq stop
net: stmmac: fix TX descriptor availability check for TSO traffic
net/rds: fix tcp stream corruption with large pages
net: mana: restore the XDP program pointer when pre-allocation fails
net: phy: dp83867: handle the active-high LED polarity mode
octeontx2-af: fix PF/CGX debugfs PCI bus lookup
net: net_failover: Fix the deadlock in net_failover_slave_name_change()
net: phy: mediatek-ge: disable EEE on the MT7530 PHY
tcp: reject non zerocopy devmem tx
net: ethernet: mtk_eth_soc: populate lpi_interfaces to fix EEE support
net: dsa: mt7530: populate lpi_interfaces to fix EEE support
net: hinic: fix mailbox segment buffer overflow
net: sun4i-emac: fix missing of_node_put() for phy_node
...
A batch of bug fixes for the smb client:
- File type corruption fixes in reparse point handling: setting S_IFMT
bits without clearing the existing type first corrupted the file mode
(e.g. S_IFREG | S_IFCHR == S_IFLNK). Fixed in the WSL, POSIX and
native symlink reparse parsers. Also fixes an uninitialized SID
structure in the POSIX readdir path when parsing fails.
- Ownership mapping fixes: forceuid/forcegid mount options were
ignored in several code paths (SID-to-id mapping, WSL extended
attributes, POSIX extensions getattr), allowing an untrusted server
to dictate local file ownership despite explicit mount overrides.
- Heap overflow and overflow fixes in DACL rewriting: replacing short
SIDs with long ones could overflow the DACL buffer, and the u16
accumulator for DACL size could wrap around with enough ACEs.
- Reference count leak fixes in oplock break and deferred close:
duplicate oplock breaks on a queued work item leaked a
cifsFileInfo reference, and deferred close had a similar leak when
requeueing a running work item. Both cause busy-inode oopses on
unmount.
- DFS superblock use-after-free fix: the iterator callback stored a
raw superblock pointer without pinning it, racing with automount
expiry.
- One-byte slab OOB read in the native symlink parser when handling
share-root relative paths.
- Hardening of legacy SMB1 input: reject userspace-crafted
cifs.idmap key descriptions that bypass kernel origin checks, and
validate DataOffset in CIFSSMBRead() to prevent heap info
disclosure from a malicious server.
- DFS cache fix: defer metadata updates until target copying
succeeds to prevent partial-state cache entries on allocation
failure.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTcqRusfSdYROJQwGkpVtNKoQNdYwUCaqLMxAAKCRApVtNKoQNd
YwSyAQDUDSxCnDMmJbRr4e22oF/YrGSN/snp8cqrZlZh2pb5/gD/c2G3xMJA85YP
yL/G8auRWkpwDl0/Parqptjhx1c9YwE=
=PjPM
-----END PGP SIGNATURE-----
Merge tag 'cifs-fixes-7.3-rc3' of https://git.manguebit.org/linux
Pull smb client fixes from Paulo Alcantara:
- File type corruption fixes in reparse point handling: setting S_IFMT
bits without clearing the existing type first corrupted the file mode
(e.g. S_IFREG | S_IFCHR == S_IFLNK). Fixed in the WSL, POSIX and
native symlink reparse parsers. Also fixes an uninitialized SID
structure in the POSIX readdir path when parsing fails.
- Ownership mapping fixes: forceuid/forcegid mount options were
ignored in several code paths (SID-to-id mapping, WSL extended
attributes, POSIX extensions getattr), allowing an untrusted server
to dictate local file ownership despite explicit mount overrides.
- Heap overflow and overflow fixes in DACL rewriting: replacing short
SIDs with long ones could overflow the DACL buffer, and the u16
accumulator for DACL size could wrap around with enough ACEs.
- Reference count leak fixes in oplock break and deferred close:
duplicate oplock breaks on a queued work item leaked a
cifsFileInfo reference, and deferred close had a similar leak when
requeueing a running work item. Both cause busy-inode oopses on
unmount.
- DFS superblock use-after-free fix: the iterator callback stored a
raw superblock pointer without pinning it, racing with automount
expiry.
- One-byte slab OOB read in the native symlink parser when handling
share-root relative paths.
- Hardening of legacy SMB1 input: reject userspace-crafted
cifs.idmap key descriptions that bypass kernel origin checks, and
validate DataOffset in CIFSSMBRead() to prevent heap info
disclosure from a malicious server.
- DFS cache fix: defer metadata updates until target copying
succeeds to prevent partial-state cache entries on allocation
failure.
* tag 'cifs-fixes-7.3-rc3' of https://git.manguebit.org/linux:
smb: client: fix one-byte OOB read in smb2_parse_native_symlink()
smb: client: fail DACL rewrite when the new DACL exceeds 64K
smb: client: fix heap overflow in DACL owner/group rewrite
smb: client: fix file type corruption in cifs_reparse_point_to_fattr()
smb: client: fix file type corruption in posix_reparse_to_fattr()
smb: client: fix file type corruption in wsl_to_fattr()
smb: client: avoid using uninitialized SIDs in cifs_posix_to_fattr()
smb: client: fix WSL reparse point uid/gid override
smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid
smb: client: fix uid/gid override in getattr with posix extensions
smb: client: fix cifsFileInfo reference leak in deferred close
smb: client: avoid leaking refcount when cifs_sb_tlink() fails
smb: client: avoid leaking refcount in cifs_queue_oplock_break()
smb: client: fill cache fields after populating cache in copy_ref_data()
smb: client: pin DFS superblock in iterator callback
smb: client: reject userspace cifs.idmap descriptions
smb: client: reject out-of-bounds DataOffset in CIFSSMBRead()
smb: client: reject short READ responses in CIFSSMBRead()
* Replace CONFIG_PROC_SYSCTL with CONFIG_SYSCTL
CONFIG_SYSCTL is the config string that controls sysctl subsys.
* Testing
Ran through x86_64 selftest. Skipped linux-next for this trivial fix.
-----BEGIN PGP SIGNATURE-----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=y3Vr
-----END PGP SIGNATURE-----
Merge tag 'sysctl-7.03-fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl fix from Joel Granados:
"This fell through the cracks during the latest merge window. There are
no more CONFIG_PROC_SYSCTL uses after this fix:
- Replace CONFIG_PROC_SYSCTL with CONFIG_SYSCTL
CONFIG_SYSCTL is the config string that controls sysctl subsys"
* tag 'sysctl-7.03-fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
syscall_user_dispatch: Use CONFIG_SYSCTL for sysctl guard
* core: Do not start hrtimer when pretimeout is zero
* msc313e: Various fixes for issues reported by Sashiko
* MAINTAINERS: Update URI for watchdog tree
* sunxi_wdt: preserve boot-enabled watchdog
-----BEGIN PGP SIGNATURE-----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=qPpk
-----END PGP SIGNATURE-----
Merge tag 'watchdog-for-v7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull watchdog fixes from Guenter Roeck:
- core: Do not start hrtimer when pretimeout is zero
- msc313e: Various fixes for issues reported by Sashiko
- MAINTAINERS: Update URI for watchdog tree
- sunxi_wdt: preserve boot-enabled watchdog
* tag 'watchdog-for-v7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
watchdog: msc313e: Sync timeout value if WDT was running at boot
watchdog: msc313e: Fix undefined behavior
watchdog: msc313e: Fix spurious reset on suspend
watchdog: msc313e: Enable clock before accessing hardware registers
watchdog: msc313e: Fix clock leak and spurious timer in settimeout()
watchdog: msc313e: Avoid division by zero
watchdog: fix hrtimer start when pretimeout is zero
MAINTAINERS: Update URI for watchdog tree
watchdog: msc313e: Fix NULL pointer dereference in PM callbacks
watchdog: sunxi_wdt: preserve boot-enabled watchdog
Xuanqiang Luo says:
====================
net/sched: fix action batch failure cleanup
Failed batched RTM_NEWACTION requests can leak action references and
reserved IDR indices when cleanup encounters a filter-bound action.
Patch 1 fixes the failure cleanup.
Patch 2 adds tc-testing regression coverage.
Failure reproduction (key output excerpts):
python3 tdc.py -f tc-tests/actions/gact-rollback.json
not ok 1 e3b1 - Failed action batch releases a bound action reference
Could not match regex pattern. Verify command output:
[...]
index 1 ref 3 bind 1
not ok 2 e3b2 - Failed action batch releases entries after a bound action
Command exited with 255, expected 0
RTNETLINK answers: Resource temporarily unavailable
We have an error talking to the kernel
not ok 3 e3b3 - Failed action batch releases repeated references to a bound action
Could not match regex pattern. Verify command output:
[...]
index 1 ref 4 bind 1
====================
Link: https://patch.msgid.link/20260909070336.32979-1-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests for cleanup after a batched RTM_NEWACTION request fails.
Replace an existing gact action bound to a filter, then fail a later
entry by requesting goto chain without a classifier context.
Check that the bound action's reference count returns to its original
value. Also cover a successfully initialized new action between the
bound action and the failing entry, verifying that its reserved index
can be reused. Repeat the bound action in another batch to check that
each temporary reference to the same action is released.
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260909070336.32979-3-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a batched RTM_NEWACTION request replaces an existing action,
tcf_idr_check_alloc() takes a temporary reference on it. If a later
action fails to initialize, tcf_action_destroy() uses strict release
semantics to clean up the actions initialized so far. For an action
bound to a filter, the strict check returns -EPERM without dropping
the temporary reference.
This error also makes tcf_action_destroy() return before releasing
subsequent entries. Any new action initialized between the bound
action and the failing entry is leaked together with its reserved
IDR slot, preventing reuse of its index.
Use tcf_idr_release() to drop each reference held by the batch without
rejecting bound actions. This allows cleanup to continue through all
initialized entries and preserves the module reference release when
an action is destroyed. Explicit action deletion and flushing retain
their separate bind-count checks.
Fixes: 55334a5db5 ("net_sched: act: refuse to remove bound action outside")
Cc: stable@vger.kernel.org
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260909070336.32979-2-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-09-08 (idpf, ice)
For idpf:
Myeonghun Pak adds calls to disable DIM work and PTM to allow for proper
cleanup.
Josh adds check, and adjustment, for VLAN headers when processing RSC
packets.
For ice:
Jake adds call to xa_destroy for xarray sched_node_ids; also moving it
from port_info struct to ice_hw to simplify its lifecycle management.
Jakub Kicinski stores trace event data as scalars instead of
dereferencing pointers in TP_printk(), preventing use-after-free issues
during event printing and eliminating double-dereference warnings.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
eth: ice: don't dereference pointers from TP_printk()
ice: add missing xa_destroy for sched_node_ids
idpf: account for VLAN header when parsing RSC packet header
idpf: disable PTM on probe failure and on remove
idpf: disable DIM work before freeing q_vectors
====================
Link: https://patch.msgid.link/20260908214502.528440-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ESP and AH cases in get_ipv6_ext_hdrs() used IPPROTO_FRAGMENT instead
of OFPIEH12_FRAG when checking for out-of-order extension headers, causing
the fragment header to not be recognised as a valid predecessor.
The original code used IPPROTO_FRAGMENT (44) as a bitmask constant where
OFPIEH12_FRAG (1 << 4 = 16) was intended. IPPROTO_FRAGMENT encodes bits
2, 3 and 5 (OFPIEH12_AUTH | OFPIEH12_DEST | OFPIEH12_ROUTER), but not
bit 4 (OFPIEH12_FRAG). This caused incorrect OFPIEH12_UNSEQ verdicts in
both the ESP and AH arms: the ESP arm failed to whitelist OFPIEH12_FRAG,
while the AH arm accidentally whitelisted OFPIEH12_AUTH.
With the fix, a packet with two AH headers now also gets OFPIEH12_UNSEQ
in addition to OFPIEH12_UNREP, matching the ESP arm which already sets
UNSEQ on a repeat, which is the intended behavior.
Fixes: 28a3f06017 ("net: openvswitch: IPv6: Add IPv6 extension header support")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/1b1582eb07550d71f3cbe210e5cb31eeb8d0ad86.1788876917.git.echaudro@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A netadmin in a user+net namespace can create many IPv4 and IPv6
multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen
id allocates an mr_table via the shared mr_table_alloc(), links it
into the per-net list, and leaves it until netns teardown. Those
objects were not charged to memcg, so the host unreclaimable slab
grows with the table count.
Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the
IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established
handling of IP addresses, routes and alternate interface names.
Unresolved MFC entries are still allocated from softIRQ with
GFP_ATOMIC and are not charged. They expire after 10 seconds and are
bounded by the socket receive queue; see commit 0079ad8e8d
("ipmr: remove hard code cache_resolve_queue_len limit").
Fixes: f0ad0860d0 ("ipv4: ipmr: support multiple tables")
Fixes: d1db275dd3 ("ipv6: ip6mr: support multiple tables")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/050b58f7fc6b45da0fb12768ebb62d18fa46133d.1788784801.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dp83td510_led_polarity_set() only recognizes PHY_LED_ACTIVE_LOW, so
PHY_LED_ACTIVE_HIGH falls through to the default case and returns -EINVAL.
of_phy_led() propagates the error, of_phy_leds() drops the LEDs registered
so far and passes it on, and phy_probe() returns it. A device tree marking
a DP83TD510 LED as 'active-high', which leds/common.yaml allows and
ethernet-phy.yaml references for led@N nodes, thus leaves the mdio device
unbound, so phy_attach_direct() falls back to the genphy driver, which
cannot drive this 10BASE-T1L single-mode PHY, so the interface has no
usable link.
The callback initializes polarity to DP83TD510E_LED_POLARITY(index), which
is the active-high setting, so the request is already satisfied and only
the case label is missing.
Cc: stable@vger.kernel.org
Fixes: 5b281fe7e3 ("net: phy: dp83td510: introduce LED framework support")
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260908105959.70453-3-donggeunyoo.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gem_ptp_init() registers the PTP clock before initializing
bp->tsu_clk_lock and the TSU hardware. Since ptp_clock_register()
publishes the PTP character device, userspace may invoke PTP callbacks
before the lock and hardware are ready.
In addition, gem_ptp_init() is called from both the interface open and
resume paths. Reinitializing tsu_clk_lock there can reset the lock while
timestamp processing is using it.
This race is theoretical and has not been observed in practice.
Initialize tsu_clk_lock once during probe and initialize the TSU before
registering the PTP clock.
Fixes: ab91f0a9b5 ("net: macb: Add hardware PTP support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/20260904030439.3994047-1-runyu.xiao@seu.edu.cn/
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260908103924.607033-1-runyu.xiao@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hsr_portdev_setup() skips promiscuous mode on non-master ports when
hsr->fwd_offloaded is set. fwd_offloaded is derived only from the ring
slaves' NETIF_F_HW_HSR_FWD bit, so this also skips it for the interlink
port, which never gets forwarding offload. Without promiscuous mode,
the interlink NIC drops unicast frames addressed to hsr_dev's MAC
(e.g. SAN traffic to the RedBox), breaking RedBox whenever the ring is
HW-offloaded.
Fixes: 5055cccfc2 ("net: hsr: Provide RedBox support (HSR-SAN)")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260908090856.2876114-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_route_iter_active() treats a walker in FWS_U at the table root as
already unlinked. fib6_del_route() can move a still-linked walker into
that same state when the current leaf is the last route at the root,
so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq
private object can then be freed while it remains on
net->ipv6.fib6_walkers. A later route deletion walks the dangling list
and uses the freed walker.
Use the list head as membership state and reinitialize it when
unlinking. Keep the existing w->node check so a never-started iterator
with a zeroed private object is not treated as linked.
The same stop helper is used by /proc/net/ipv6_route and by the BPF
ipv6_route iterator. The BPF show path only widens the race.
Fixes: 8d2ca1d7b5 ("ipv6: avoid high order memory allocations for /proc/net/ipv6_route")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Co-developed-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/89699735763f6c297584d7c2ff106239cc1e8ce0.1788837093.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_tso_xmit() estimates the number of free TX descriptors required by
a TSO skb as:
(skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1
which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This
underestimates the descriptors actually consumed by stmmac_tso_allocator(),
since each fragment is mapped individually and so it needs at least one
descriptor regardless of its size. Moreover, one descriptor is used for
the L2/L3/L4 headers and, when the MSS changes, one more is consumed for
the MSS context descriptor.
For a highly fragmented TSO skb the check can therefore pass even when the
ring has too few free slots. stmmac_tso_allocator() then writes past the
available descriptors, overwriting descriptors still owned by the DMA
engine, corrupting the TX ring.
Add stmmac_tso_get_num_desc() to compute the exact number of descriptors
needed for the header, the linear payload and each fragment, plus the MSS
context descriptor when required, and use it in the availability check.
Fixes: f748be531d ("stmmac: support new GMAC4")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
Link: https://patch.msgid.link/20260907-stmmac-fix-tso-nfrags-check-v1-1-328459906cdb@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_message_map_pages() assigns PAGE_SIZE bytes to every
scatterlist entry, even when total_len ends in a partial page. The RDS
congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE
greater than 8192 the scatterlist maps bytes beyond the end of the
congestion map. RDS-TCP transmits the SG contents according to those
lengths, so the extra bytes become part of the TCP RDS stream and are
interpreted as subsequent RDS message headers, corrupting the stream.
Limit the final scatterlist mapping to the number of bytes remaining.
This has no effect on systems with a 4K page size and allows RDS-TCP to
be used on systems with 16K and larger page sizes.
The RDS selftest, which previously hung on 16K pages, now passes.
Fixes: 7875e18e09 ("RDS: Message parsing")
Signed-off-by: Greg Marsden <greg.marsden@oracle.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/apxJjxvStibPI0AS@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mana_xdp_set() publishes the new program into apc->bpf_prog before it
allocates anything, because mana_pre_alloc_rxbufs() sizes the buffers
from it via mana_get_rxbuf_cfg(). When that allocation fails the
function returns the error directly, skipping the err_dealloc_rxbuffs
label which is the only place that restores the previous pointer.
The attach is reported as failed, so the BPF core drops the reference it
held for the caller and the program can be freed, while apc->bpf_prog
still points at it. The next consumer of mana_xdp_get() - typically
mana_chn_setxdp() from mana_alloc_queues() on the following ifup, or
after a TX timeout reset - then calls bpf_prog_add() on freed memory.
This is reachable from an ordinary "ip link set dev ethX xdp obj ..."
whenever the per-queue RX buffer pre-allocation cannot be satisfied.
Restore the previous program on that error path.
Fixes: 730ff06d3f ("net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260904202640.3900685-1-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit a274465cc3 ("net: phy: support 'active-high' property for PHY
LEDs") added PHY_LED_ACTIVE_HIGH and made of_phy_led() set the matching
bit in the modes mask when a LED node carries the 'active-high'
property. dp83867 was not part of that series.
dp83867_led_polarity_set() only recognizes PHY_LED_ACTIVE_LOW, so
PHY_LED_ACTIVE_HIGH falls through to the default case and returns -EINVAL.
of_phy_led() propagates the error, of_phy_leds() drops the LEDs registered
so far and passes it on, and phy_probe() fails. A device tree marking a
DP83867 LED as 'active-high', which leds/common.yaml allows and
ethernet-phy.yaml references for led@N nodes, thus stops the PHY from
probing.
Active high is what the function programs when no polarity mode is
requested at all, so the initial value of polarity already satisfies the
request and only the case label is missing.
The same series updated mxl-gpy in commit eb89c79c1b ("net: phy:
mxl-gpy: correctly describe LED polarity") and aquantia in
commit 9d55e68b19 ("net: phy: aquantia: correctly describe LED
polarity override").
Fixes: a274465cc3 ("net: phy: support 'active-high' property for PHY LEDs")
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Link: https://patch.msgid.link/20260903022839.4006614-1-donggeunyoo.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rvu_dbg_rvu_pf_cgx_map_display() locates each RVU PF PCI device via
pci_get_domain_bus_and_slot() when printing the PF-to-CGX map. It
assumed PF0 always sits on PCI bus 1 and derived other PF bus numbers
as pf + 1, but the AF device can be enumerated on a different bus.
Use rvu->pdev->bus->number as the base bus instead, so each PF lookup
uses pf + start on systems where RVU functions are on contiguous buses
but do not start at bus 1.
Fixes: e2fb373038 ("octeontx2-af: Display CGX, NIX and PF map in debugfs.")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260904085114.3385530-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MT7530 internal GE PHY advertises EEE by hardware default, but its
EEE support is defective: with EEE advertised, some link partners fail
to establish a stable link. On a 2-pair (4-wire) cable where both ends
advertise gigabit, 1000BASE-T training cannot succeed, and instead of
falling back to 100 Mbps the port loops, so no link or DHCP lease is
ever obtained. MediaTek confirms the hardware is the root cause (Landen
Chao, 2021): "EEE of the 10-year-old MT7530 internal gephy has many IOT
problems, so it is recommended to disable its EEE."
mtk_gephy_config_init() used to clear the EEE advertisement early, but
commit af3b4b0e59 ("net: phy: mediatek-ge: do not disable EEE
advertisement") removed that on the rationale that the DSA subdriver
already performs an early disable. That holds for MT7531, whose
mt7531_setup() clears MDIO_AN_EEE_ADV on each switch PHY, but not for
the MT7530 PHY: neither the MT7621 integrated switch nor the dedicated
MT7530 IC ever had such a loop, so removing it left those boards
without any working early EEE disable and the link flapping came back.
Since the broken hardware is the PHY, fix it in the PHY driver so it
covers all users of this PHY, integrated in a switch or standalone:
- clear MDIO_AN_EEE_ADV in probe(), as early as possible, before
anything can negotiate EEE with the link partner;
- clear it again in config_init() and call phy_disable_eee() there.
config_init() is what phy_init_hw() replays after a PHY reset, when
the register is back at its EEE-advertising hardware default, and
it runs after of_set_phy_eee_broken() in phy_probe(), so the
eee_disabled_modes mask survives and neither phylib nor userspace
can re-enable EEE. dp83867 disables broken EEE from config_init()
the same way.
Auto-negotiation then falls back to a stable 100 Mbps link instead of
looping at gigabit. Tested on ASUS RT-AX53U (MT7621): with a 2-pair
cable on the WAN port, a single clean 100 Mbps link comes up and a
DHCP lease is obtained, where the unpatched driver loops.
Fixes: af3b4b0e59 ("net: phy: mediatek-ge: do not disable EEE advertisement")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vladislav Karmanov <vladislav.karmanov.dev@gmail.com>
Link: https://patch.msgid.link/20260908145213.3976508-1-vladislav.karmanov.dev@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Devmem tcp tx doesn't work without zero-copy, however it's not currently
enforced if NETIF_F_SG isn't present. In this case, tcp_sendmsg_locked()
will try the copy path and try to copy data from an iovec which consists
of offsets into the dma-buf and would normally fail. Moreover,
d9c56501c7 ("net: tcp: block mixing readable and unreadable frags")
relies on that and assumes that the devmem binding is present IFF we're
using the zero-copy path, which can be used to mix net-iov and pages in
a single skb, and break invariants. Let's reject devmem tx without
zero-copy.
Note, the parameter check the patch is modifying is too loose, we can
create an io_uring request with dmabuf_id and all ZC flags, but which
won't have the binding. We replace it with stricter validation.
Fixes: bd61848900 ("net: devmem: Implement TX path")
Fixes: d9c56501c7 ("net: tcp: block mixing readable and unreadable frags")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/fdc2478d8f21268d7078556409887d8e6ba0ad32.1788529053.git.asml.silence@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Aleksei Sviridkin says:
====================
net: restore EEE on MediaTek switches and SoC MACs
Both drivers fill in phylink_config.lpi_capabilities and
lpi_timer_default but never lpi_interfaces. phylink treats a MAC as
supporting managed EEE only when the tx_lpi methods are implemented and
BOTH bitmaps are non-empty, which phylink_create() decides once and for
all, so EEE has been off on every mt753x port and on every mtk_eth_soc
MAC that uses mtk_phylink_ops since the two commits named in the
Fixes: tags. Because the tx_lpi methods ARE implemented, phylink takes
the other branch and calls phy_disable_eee(), which fills
eee_disabled_modes - so userspace cannot enable EEE either.
On an MT7981B board with an MT7531 switch, before these patches:
== lan1
Cannot get EEE settings: Not supported
== lan2
Cannot get EEE settings: Not supported
== lan3
Cannot get EEE settings: Not supported
== lan4
Cannot get EEE settings: Not supported
== wan
Cannot get EEE settings: Not supported
lan1-3 are the MT7531 internal PHYs, lan4 is an EN8811H on switch port
5 whose MAC side runs 2500BASE-X rate matched to a 1 Gbps media link,
and wan is the mtk_eth_soc MAC with its directly attached 1 Gbps PHY -
so both drivers are covered.
Each patch fills lpi_interfaces from supported_interfaces and leaves
2.5 Gbps out of both bitmaps for now. LPI above 1 Gbps is unvalidated
rather than unsupported: both MACs fold 2.5 Gbps onto their 1 Gbps
speed encoding, so the 1 Gbps EEE force bit is what would govern it.
MediaTek's SDK driver sets the force bits for 100 Mbps and 1 Gbps only,
EEE signalling on 2500BASE-X is outside 802.3, and the 1 us unit of the
wakeup timers is undocumented at 2.5 times the port clock.
The SoC MAC patch fills lpi_interfaces only on SoCs carrying a new
MTK_GMAC_EEE capability. mtk_mac_enable_tx_lpi() programs wake-up times
taken from MT7531's reset values, and the capability marks the SoCs
where those have been measured to work: MT7981 for now. The others keep
today's behaviour, EEE unreachable from userspace, until someone with
the hardware confirms them.
Neither driver sets eee_enabled_default, so LPI stays off until
userspace asks for it with ethtool --set-eee. The EEE advertisement is
a different matter: phylink stops force-clearing it, so a PHY that
advertises EEE out of reset advertises it again and the link may
negotiate EEE, without this MAC asserting LPI. MT7531's internal PHYs
and EN7528 are the exceptions, for the reasons in patch 1. Devicetree
eee-broken-* marks act at the PHY level and keep working, so a board
that already distrusts its PHYs stays protected: OpenWrt marks all
modes broken on MT7621's internal PHYs.
The two patches are independent and touch different subsystems; they
are sent together because they are the same bug.
Targeted at net as a regression fix with an active userspace lockout;
can be retargeted at net-next if maintainers prefer.
Based on net-next at 91ec203513. All three files touched are byte
identical in net/main and the series applies there unchanged.
After the series, all five ports report:
EEE status: disabled
Tx LPI: disabled
Supported EEE link modes: 100baseT/Full
1000baseT/Full
Advertised EEE link modes: Not reported
No 2.5G mode is offered, which is the narrowed lpi_capabilities, and
nothing is advertised until userspace asks. On this board no PHY came
out of reset advertising EEE, so the case where the advertisement
returns once phylink stops clearing it is not exercised here.
Enabling it on lan1, whose partner advertises EEE at both speeds:
# ethtool --set-eee lan1 eee on
EEE status: enabled - active
Advertised EEE link modes: 100baseT/Full 1000baseT/Full
Link partner advertised EEE link modes: 100baseT/Full 1000baseT/Full
# ethtool --set-eee lan1 eee on tx-lpi on
EEE status: enabled - active
Tx LPI: 30 (us)
With LPI armed, 30 parallel ICMPv6 streams of 1400-byte payload, 300
packets each one second apart - so every gap crosses the LPI threshold
and the link enters and leaves LPI thousands of times over 300 s - lost
nothing: 300/300 on every stream, tx and rx error counters unchanged,
carrier_changes unchanged, and no mac_enable_tx_lpi errors in dmesg.
On wan, cabled for this round to a partner that advertises EEE (a
BCM5720), the MT7981 GMAC's own LPI was exercised. With tx-lpi armed
the wan PHY's MMD 3.1 reads 0x0f44, Tx LPI indication set, so the MAC
is asserting LPI; it drops to 0x0044 with tx-lpi off and comes back
with it on. The same 30-stream test at 1 Gbps lost nothing over 9000
packets with the link cycling through LPI at every 1 s gap. At
100 Mbps the only losses were the first packet or two of some
streams, and those reproduce with EEE disabled on both ends:
neighbour discovery for 30 streams starting at once. The 17 and 36 that
mtk_mac_enable_tx_lpi() programs therefore hold on MT7981 against this
partner at both speeds. Its Tx LPI reads 1000 (us) against lan1's 30;
see the note below the scissors of patch 1.
lan4 keeps EEE disabled and never arms LPI, which is what dropping
2500BASE-X from lpi_interfaces is for. Forwarding through it was
lossless with no carrier change.
====================
Link: https://patch.msgid.link/20260903123644.23800-1-f@lex.la
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
phylink_create() decides once and for all that a MAC supports managed
EEE, and it requires the tx_lpi ops plus non-empty lpi_capabilities and
lpi_interfaces. mtk_add_mac() leaves lpi_interfaces empty.
So ever since EEE support was added, ethtool has answered "Not
supported" on every MAC that uses mtk_phylink_ops, and
phy_disable_eee() has locked userspace out of turning EEE on. MT7628
is unaffected, as rt5350_phylink_ops has no tx_lpi methods.
Leave 2.5 Gbps out of both bitmaps, and the xGMII modes that
mtk_mac_enable_tx_lpi() already refuses. MAC_MCR folds SPEED_2500 onto
MAC_MCR_SPEED_1000, so MAC_MCR_EEE1G would govern LPI on such a link,
and that is unvalidated rather than known unsupported: MediaTek's SDK
driver sets the EEE force bits for 100 Mbps and 1 Gbps only, and the
unit of the wakeup timers is undocumented with the port clock at
2.5 times the rate.
mtk_mac_enable_tx_lpi() programs wake-up times taken from MT7531's
reset values, and the SoC's own field has no reset value to fall
back on. Only MT7981 has been seen to exit LPI cleanly with them, so
the LPI interfaces sit behind a new MTK_GMAC_EEE capability that only
MT7981 sets; every other SoC keeps the current behaviour until it has
been confirmed.
LPI stays off until userspace enables it, but the EEE advertisement of
a PHY that advertises it out of reset comes back, since phylink stops
force-clearing it.
Fixes: 952d732536 ("net: ethernet: mediatek: add EEE support")
Signed-off-by: Aleksei Sviridkin <f@lex.la>
Link: https://patch.msgid.link/20260903123644.23800-3-f@lex.la
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
phylink_create() decides once and for all that a MAC supports managed
EEE, and it requires the tx_lpi ops plus non-empty lpi_capabilities and
lpi_interfaces. mt753x_phylink_get_caps() leaves lpi_interfaces empty.
So ever since the conversion to phylink managed EEE, ethtool has
answered "Not supported" on every mt753x port, and phy_disable_eee()
has locked userspace out of turning EEE on. That undoes what
commit 06dfcd4098 ("net: dsa: mt7530: fix enabling EEE on MT7531
switch on all boards") arranged: EEE off by default, but reachable
with ethtool.
Leave the speeds above 1 Gbps out of both bitmaps. PMCR folds
SPEED_2500 and SPEED_10000 onto PMCR_FORCE_SPEED_1000, so
PMCR_FORCE_EEE1G would govern LPI on such a link, and that is
unvalidated rather than known unsupported: MediaTek's SDK driver sets
the EEE force bits for 100 Mbps and 1 Gbps only, and the unit of the
wakeup timers is undocumented with the port clock at 2.5 times the
rate.
LPI stays off until userspace enables it, but the EEE advertisement of
a PHY that advertises it out of reset comes back, since phylink stops
force-clearing it.
Fixes: 9cf21773f5 ("net: dsa: mt7530: convert to phylink managed EEE")
Signed-off-by: Aleksei Sviridkin <f@lex.la>
Link: https://patch.msgid.link/20260903123644.23800-2-f@lex.la
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
check_mbox_seq_id_and_seg_len() validates that seq_id does not
exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed
MBOX_SEG_LEN (48). However, this allows the last segment
(seq_id=42) to carry a full 48-byte payload, writing to offset
42*48=2016 for 48 bytes (ending at byte 2064). The receive
buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a
16-byte heap buffer overflow.
The hinic3 driver already handles this correctly by defining
MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it
exceeds the remaining buffer space. Apply the same fix to the
hinic driver.
Fixes: a425b6e1c6 ("hinic: add mailbox function support")
Signed-off-by: Aamir Ahmed <elb12345@hotmail.co.uk>
Link: https://patch.msgid.link/AS8P251MB0001AE870B09020B46B5D7DBC8B22@AS8P251MB0001.EURP251.PROD.OUTLOOK.COM
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
of_parse_phandle() returns a node pointer with an elevated refcount.
Add the missing of_node_put() on the probe error path after
register_netdev() fails and in emac_remove().
Fixes: 492205050d ("net: Add EMAC ethernet driver found on Allwinner A10 SoC's")
Signed-off-by: Li Youhong <liyouhong@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260904080758.2432748-1-dayou5941@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Victor Nogueira says:
====================
net/sched: cls_route: fix bucket retention and handle recomputation
Patch 1 is the v1 patch, unchanged. route4_change() can move an existing
filter to a different top-level bucket, since route4_set_parms()
recomputes the handle from TCA_ROUTE4_TO/FROM/IIF. The filter is
unlinked from the old bucket, but the bucket itself is never freed once
it goes empty, so route4_delete() keeps reporting *last=false after the
last live filter is gone. That pins the empty tcf_proto and leaks it.
The filters linked to a bucket are refcounted now, and the bucket is
dropped from head->table[] as soon as the count reaches zero.
Reviewing v1, Sashiko pointed out that the duplicate scan in
route4_set_parms() compares against the wrong handle [1]. Patches 2 and
3 fix the two symptoms of that.
Patch 2 makes the scan compare against nhandle. f->handle is the handle
the filter has before the update, not the one it is about to be linked
under, so a change that moves a filter into a chain already holding
nhandle misses the collision and links a second filter under the same
handle. The newcomer is then unreachable: route4_get() returns the
incumbent, and route4_classify() stops at the first filter whose f->id
matches.
Patch 3 handles the mirror case. An in-place replace computes an nhandle
that the filter being replaced already carries, so the scan finds that
filter and rejects the request with -EEXIST. The older filter is passed
to route4_set_parms() and skipped in the scan. Skipping it alone would
rename the filter it replaces: the 0x7F00 order bits are carried in no
attribute and were folded into nhandle on the create path alone, so an
order 1 filter came back as order 0, and a sibling sharing its key could
then no longer be replaced at all. They are carried over now whenever
the request builds the key the filter already has, which leaves a
request that does change the key renaming the filter as before.
Patch 4 adds tdc coverage for all three, including the cross-bucket move
case Sashiko noted route.json had no test for.
[1] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260829205422.854785-1-victor%40mojatatu.com
====================
Link: https://patch.msgid.link/20260907192133.2639067-1-victor@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
