Wa_14020863754 applies to the display IP, so we should be checking on
display IP version instead of platform. So, let's replace
display->platform.battlemage with the proper IP version check (14.01 for
Xe2_HPD).
Furthermore, for workarounds, we should be checking on full IP versions
to avoid applying the workaround to some variant of the IP that could
theoretically appear in the future (which is likely to have a different
minor release number), since the issue addressed by the workaround could
be fixed in such new release.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227-xe3lpd-wa-14020863754-v2-1-92b35de1c563@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Have DSB perform plane scaler programming as well. Changes
to pfit/pipe scaler are not being done on the dsb since those
take the fastset path. However we do now allow DSB based plane
updates when the pfit/pipe scaler is currently enabled (the
pfit/pipe scaler just won't be touched by the DSB).
Fortunately the hardware issue where some scaler registers
are latched at frame start and some at start of vblank has
been fixed on icl+ (IIRC), and since DSB is tgl+ only we
don't have to do any changes to the DSB vblank evasion.
Not that we handle that hardware issue correctly in the
CPU vblank evasion either...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218205850.1422-4-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shakar@intel.com>
We don't actually need any planes to get updated in order
to perform the commit on the DSB. Allow DSB based updates
even when we don't touch planes. The main benefit here
is that pure LUT updates will now go through the DSB path
and therefore we don't have to do vblank evasion/etc. on
the CPU.
I think the reason I had this excluded was that I was
originally contemplating using frame/flip timestamps as
a way to complete the commits. But I had to scrap that
idea when it turned out that those timestamp get
corrupted when DSB is poking at random registers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218205850.1422-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
We create the stream encoders and attach connectors for each pipe we
have. As the number of pipes has increased, we've failed to update the
topology manager maximum number of payloads to match that. Bump up the
max stream count to match number of pipes, enabling the fourth stream on
platforms that support four pipes.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226135626.1956012-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- Add mmap support for PCI memory barrier (Tejas, Matthew Auld)
- Enable integration with perf pmu, exposing event counters: for now, just
GT C6 residency (Vinay, Lucas)
- Add "survivability mode" to allow putting the driver in a state capable of
firmware upgrade on critical failures (Riana, Rodrigo)
- Add PXP HWDRM support and enable for compatible platforms:
Meteor Lake and Lunar Lake (Daniele, John Harrison)
- Expose package and vram temperature over hwmon subsystem (Raag, Badal, Rodrigo)
Cross-subsystem Changes:
- Backmege drm-next to synchronize with i915 display and other internal APIs
Display Changes (including i915):
- Device probe re-order to help with flicker-free boot (Maarten)
- Align watermark, hpd and dsm with i915 (Rodrigo)
- Better abstraction for d3cold (Rodrigo)
Driver Changes:
- Make sure changes to ccs_mode is with helper for gt sync reset (Maciej)
- Drop mmio_ext abstraction since it didn't prove useful in its current form
(Matt Roper)
- Reject BO eviction if BO is bound to current VM (Oak, Thomas Hellström)
- Add GuC Power Conservation debugfs (Rodrigo)
- L3 cache topology updates for Xe3 (Francois, Matt Atwood)
- Better logging about missing GuC logs (John Harrison)
- Better logging for hwconfig-related data availability (John Harrison)
- Tracepoint updates for xe_bo_create, xe_vm and xe_vma (Oak)
- Add missing SPDX licenses (Francois)
- Xe suballocator imporovements (Michal Wajdeczko)
- Improve logging for native vs SR-IOV driver mode (Satyanarayana)
- Make sure VF bootstrap is not attempted in execlist mode (Maarten)
- Add GuC Buffer Cache abstraction for some CTB H2G actions and use
during VF provisioning (Michal Wajdeczko)
- Better synchronization in gtidle for new users (Vinay)
- New workarounds for Panther Lake (Nirmoy, Vinay)
- PCI ID updates for Panther Lake (Matt Atwood)
- Enable SR-IOV for Panther Lake (Michal Wajdeczko)
- Update MAINTAINERS to stop directing xe changes to drm-misc (Lucas)
- New PCI IDs for Battle Mage (Shekhar)
- Better pagefault logging (Francois)
- SR-IOV fixes and refactors for past and new platforms (Michal Wajdeczko)
- Platform descriptor refactors and updates (Sai Teja)
- Add gt stats debugfs (Francois)
- Add guc_log debugfs to dump to dmesg (Lucas)
- Abstract per-platform LMTT availability (Piotr Piórkowski)
- Refactor VRAM manager location (Piotr Piórkowski)
- Add missing xe_pm_runtime_put when forcing wedged mode (Shuicheng)
- Fix possible lockup when forcing wedged mode (Xin Wang)
- Probe refactors to use cleanup actions with better error handling (Lucas)
- XE_IOCTL_DBG clarification for userspace (Maarten)
- Better xe_mmio initialization and abstraction (Ilia)
- Drop unnecessary GT lookup (Matt Roper)
- Skip client engine usage from fdinfo for VFs (Marcin Bernatowicz)
- Allow to test xe_sync_entry_parse with error injection (Priyanka)
- OA fix for polled read (Umesh)
-----BEGIN PGP SIGNATURE-----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=WDS6
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-02-24' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Add mmap support for PCI memory barrier (Tejas, Matthew Auld)
- Enable integration with perf pmu, exposing event counters: for now, just
GT C6 residency (Vinay, Lucas)
- Add "survivability mode" to allow putting the driver in a state capable of
firmware upgrade on critical failures (Riana, Rodrigo)
- Add PXP HWDRM support and enable for compatible platforms:
Meteor Lake and Lunar Lake (Daniele, John Harrison)
- Expose package and vram temperature over hwmon subsystem (Raag, Badal, Rodrigo)
Cross-subsystem Changes:
- Backmege drm-next to synchronize with i915 display and other internal APIs
Display Changes (including i915):
- Device probe re-order to help with flicker-free boot (Maarten)
- Align watermark, hpd and dsm with i915 (Rodrigo)
- Better abstraction for d3cold (Rodrigo)
Driver Changes:
- Make sure changes to ccs_mode is with helper for gt sync reset (Maciej)
- Drop mmio_ext abstraction since it didn't prove useful in its current form
(Matt Roper)
- Reject BO eviction if BO is bound to current VM (Oak, Thomas Hellström)
- Add GuC Power Conservation debugfs (Rodrigo)
- L3 cache topology updates for Xe3 (Francois, Matt Atwood)
- Better logging about missing GuC logs (John Harrison)
- Better logging for hwconfig-related data availability (John Harrison)
- Tracepoint updates for xe_bo_create, xe_vm and xe_vma (Oak)
- Add missing SPDX licenses (Francois)
- Xe suballocator imporovements (Michal Wajdeczko)
- Improve logging for native vs SR-IOV driver mode (Satyanarayana)
- Make sure VF bootstrap is not attempted in execlist mode (Maarten)
- Add GuC Buffer Cache abstraction for some CTB H2G actions and use
during VF provisioning (Michal Wajdeczko)
- Better synchronization in gtidle for new users (Vinay)
- New workarounds for Panther Lake (Nirmoy, Vinay)
- PCI ID updates for Panther Lake (Matt Atwood)
- Enable SR-IOV for Panther Lake (Michal Wajdeczko)
- Update MAINTAINERS to stop directing xe changes to drm-misc (Lucas)
- New PCI IDs for Battle Mage (Shekhar)
- Better pagefault logging (Francois)
- SR-IOV fixes and refactors for past and new platforms (Michal Wajdeczko)
- Platform descriptor refactors and updates (Sai Teja)
- Add gt stats debugfs (Francois)
- Add guc_log debugfs to dump to dmesg (Lucas)
- Abstract per-platform LMTT availability (Piotr Piórkowski)
- Refactor VRAM manager location (Piotr Piórkowski)
- Add missing xe_pm_runtime_put when forcing wedged mode (Shuicheng)
- Fix possible lockup when forcing wedged mode (Xin Wang)
- Probe refactors to use cleanup actions with better error handling (Lucas)
- XE_IOCTL_DBG clarification for userspace (Maarten)
- Better xe_mmio initialization and abstraction (Ilia)
- Drop unnecessary GT lookup (Matt Roper)
- Skip client engine usage from fdinfo for VFs (Marcin Bernatowicz)
- Allow to test xe_sync_entry_parse with error injection (Priyanka)
- OA fix for polled read (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/m3gbuh32wgiep43i4zxbyhxqbenvtgvtao5sczivlasj7tikwv@dmlba4bfg2ny
drm/i915 feature pull for v6.15:
Features and functionality:
- Enable DP 128b/132b SST DSC (Jani, Imre)
- Allow DSB to perform commits when VRR is enabled (Ville)
- Compute HDMI PLLs for SNPS/C10 PHYs for rates not in fixed tables (Ankit)
- Allow DSB usage when PSR is enabled on LNL+ (Jouni)
- Enable Panel Replay mode change without full modeset (Jouni)
- Enable async flips with compressed buffers on ICL+ (Ville)
- Support luminance based brightness control via DPCD for eDP (Suraj)
- Enable VRR enable/disable without full modeset (Mitul, Ankit)
- Add debugfs facility for force testing HDCP 1.4 (Suraj)
- Add scaler tracepoints, improve plane tracepoints (Ville)
- Improve DMC wakelock debugging facilities (Gustavo)
- Allow GuC SLPC default strategies on MTL+ for performance (Rodrigo)
- Provide more information on display faults (Ville)
Refactoring and cleanups:
- Continue conversions to struct intel_display (Ville, Jani, Suraj, Imre)
- Joiner and Y plane reorganization (Ville)
- Move HDCP debugfs to intel_hdcp.c (Jani)
- Clean up and unify LSPCON interfaces (Jani)
- Move code out of intel_display.c to reduce its size (Ville)
- Clean up and simplify DDI port enabling/disabling (Imre)
- Make LPT LP a dedicated PCH type, refactor (Jani)
- Simplify DSC range BPG offset calculation (Ankit)
- Scaler cleanups (Ville)
- Remove unused code from GVT (David Alan Gilbert)
- Improve plane debugging (Ville)
- DSB and VRR refactoring (Ville)
Fixes:
- Check if vblank is sufficient for DSC prefill and scaler (Mitul)
- Fix Mesa clear color alignment regression (Ville)
- Add missing TC DP PHY lane stagger delay (Imre)
- Fix DSB + VRR usage for PTL+ (Ville)
- Improve robustness of display VT-d workarounds (Ville)
- Fix platforms for dbuf tracker state service programming (Ravi)
- Fix DMC wakelock support conditions (Gustavo)
- Amend DMC wakelock register ranges (Gustavo)
- Disable the Common Primary Timing Generator (CMTG) (Gustavo)
- Enable C20 PHY SSC (Suraj)
- Add workaround for DKL PHY DP mode write (Nemesa)
- Fix build warnings on clamp() usage (Guenter Roeck, Ankit)
- Fix error handling while adding a connector (Imre)
- Avoid full modeset at probe on vblank delay mismatches (Ville)
- Fix encoder HDMI check for HDCP line rekeying (Suraj)
- Fix HDCP repeater authentication during topology change (Suraj)
- Handle display PHY power state reset for power savings (Mika)
- Fix typos all over the place (Nitin)
- Update HDMI TMDS C20 parameters for various platforms (Dnyaneshwar)
- Guarantee a minimum hblank time for 128b/132b and 8b/10b MST (Arun, Imre)
- Do not hardcode LSPCON settle timeout (Giedrius Statkevičius)
Xe driver changes:
- Re-use display vmas when possible (Maarten)
- Remove double pageflip (Maarten)
- Enable DP tunneling (Imre)
- Separate i915 and xe tracepoints (Ville)
DRM core changes:
- Increase DPCD eDP display control CAP size to 5 bytes (Suraj)
- Add DPCD eDP version 1.5 definition (Suraj)
- Add timeout parameter to drm_lspcon_set_mode() (Giedrius Statkevičius)
Merges:
- Backmerge drm-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87h64j7b7n.fsf@intel.com
The fault handler is supposed to return true when it
handles the fault. The pipeDMC and ATS handlers are
returning false instead which results in the
"unreported faults" WARN triggering when it shouldn't.
Fixes: f13011a799 ("drm/i915: Pimp display fault reporting")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224173017.29500-1-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
The i915 core debugfs has no business looking at power domain guts for
runtime power status. Move the info to the more appropriate place.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250225121742.721871-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The encoder HW/SW state verification should use a SW state which stays
unchanged while the encoder/output is active. The intel_dp::is_mst flag
used during state computation to choose between the DP SST/MST modes can
change while the output is active, if the sink gets disconnected or the
MST topology is removed for another reason. A subsequent state
verification using intel_dp::is_mst leads then to a mismatch if the
output is disabled/re-enabled without recomputing its state.
Use the encoder's active MST link count instead, which will be always
non-zero for an active MST output and will be zero for SST.
Fixes: 35d2e4b756 ("drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout")
Fixes: 40d489fac0 ("drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()")
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224093242.1859583-1-imre.deak@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' into drm-next
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next
can base on rc4.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Revert one cleanup which turned out to eat too much stack space
-----BEGIN PGP SIGNATURE-----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=TO6X
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Revert one cleanup which turned out to eat too much stack space"
* tag 'i2c-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Allocate temporary client dynamically
- Fix AVX-VNNI CPU feature dependency bug triggered via
the 'noxsave' boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=CR8P
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix AVX-VNNI CPU feature dependency bug triggered via the 'noxsave'
boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
* tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs: arch/x86/sva: Fix two grammar errors under Background and FAQ
x86/cpufeatures: Make AVX-VNNI depend on AVX
MAINTAINERS: Change maintainer for RDT
- Fix overly spread-out RSEQ concurrency ID allocation pattern that
regressed certain workloads.
- Fix RSEQ registration syscall behavior on -EFAULT errors when
CONFIG_DEBUG_RSEQ=y. (This debug option is disabled on most
distributions.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=CuyA
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq fixes from Ingo Molnar:
- Fix overly spread-out RSEQ concurrency ID allocation pattern that
regressed certain workloads
- Fix RSEQ registration syscall behavior on -EFAULT errors when
CONFIG_DEBUG_RSEQ=y (This debug option is disabled on most
distributions)
* tag 'sched-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Fix rseq registration with CONFIG_DEBUG_RSEQ
sched: Compact RSEQ concurrency IDs with reduced threads and affinity
- Fix inline asm constraint in cmma_test_essa() to avoid potential ESSA
detection miscompilation
- Fix build failure with CONFIG_GENDWARFKSYMS by disabling purgatory
symbol exports with -D__DISABLE_EXPORTS
- Update defconfigs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAme5DtQACgkQjYWKoQLX
FBidIgf/SVOEoOSCeHHt1M2PXuml55iKpkB6usA7ArVRBfVs2H8FVcI5/b/geQV/
HAa/4BL0dgVtPLse8BAucB+FRYUdWveAAkDcknmxlwYPDvKGCnpXipcQkpPFicIW
gGoLXvh1Rq7gwfhqm1XGSPipvpTHf7JstDpHa+BbUtOElzOFl8XZL8UMqf91GXMn
XEllxtJgUBqHVd//TP99KAgUbaPbLpPxKMX72cuSusAfOyiroG/ft/PwfbQU0BSl
LMZpUpRyDE76lSsAEyc8YAuCMmt0ubY+aYFfO9mvA11bAFTskcaQO2PAq8fhUY4/
Mg604S8m2G44hoW+xKcvX8xN/PWuuA==
=iTtS
-----END PGP SIGNATURE-----
Merge tag 's390-6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix inline asm constraint in cmma_test_essa() to avoid potential ESSA
detection miscompilation
- Fix build failure with CONFIG_GENDWARFKSYMS by disabling purgatory
symbol exports with -D__DISABLE_EXPORTS
- Update defconfigs
* tag 's390-6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix ESSA detection
s390/purgatory: Use -D__DISABLE_EXPORTS
s390: Update defconfigs
Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to ftrace.
The manager ops does not have any callback but calls the sub-ops
callbacks. The manage ops hashes (what is used to tell ftrace what
functions to attach to) is built on the sub-ops it manages.
There was an error in the way it built the hash. An empty hash means to
attach to all functions. When the manager ops had one sub-ops it properly
copied its hash. But when the manager ops had more than one sub-ops, it
went into a loop to make a set of all functions it needed to add to the
hash. If any of the subops hashes was empty, that would mean to attach
to all functions. The error was that the first iteration of the loop
passed in an empty hash to start with in order to add the other hashes.
That starting hash was mistaken as to attach to all functions. This made
the manage ops attach to all functions whenever it had two or more
sub-ops, even if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for that
function will be added to the manager ops for each subops. This causes
waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is attached
to. It also has a counter of how many fprobes are attached. When the last
fprobe is removed, it unregisters the fprobe from ftrace but does not
remove the functions the last fprobe was attached to from the hash. This
leaves the old functions attached. When a new fprobe is added, the fprobe
infrastructure attaches to not only the functions of the new fprobe, but
also to the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes from
zero to one, it attaches its ops to ftrace. When an fprobe is removed, the
counter is decremented. If the counter goes from 1 to zero, it removes the
fprobes ops from ftrace. There was an issue where if two fprobes trace the
same function, the addition of each fprobe would increment the counter.
But when removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not remove
the functions from the ftrace ops. But it also did not decrement the
counter. When the last fprobe is removed, the counter is still one. This
leaves the fprobes callback still registered with ftrace and it being
called by the functions defined by the fprobes ops hash. Worse yet,
because all the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions. Thus, this puts the
state of the system where every function is calling the fprobe callback
handler (which does nothing as there are no registered fprobes), but this
causes a good 13% slow down of the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which added
another layer of preempt disable. As the preempt_count gets traced in the
event, it needs to subtract the amount of preempt disabling the tracer
does to record what the preempt_count was when the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that is
set by the return of the next() function. The start() function allocates
it and the stop() function frees it. But when the last item is found, the
next() returns NULL which leaks the data that was allocated in start().
The m->private is used for something else, so have next() free the data
when it returns NULL, as stop() will then just receive NULL in that case.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ7j6ARQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quFxAQDrO8tjYbhLqg/LMOQyzwn/EF3Jx9ub
87961mA0rKTkYwEAhPNzTZ6GwKyKc4ny/R338KgNY69wWnOK6k/BTxCRmwk=
=TOah
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to
ftrace. The manager ops does not have any callback but calls the
sub-ops callbacks. The manage ops hashes (what is used to tell
ftrace what functions to attach to) is built on the sub-ops it
manages.
There was an error in the way it built the hash. An empty hash
means to attach to all functions. When the manager ops had one
sub-ops it properly copied its hash. But when the manager ops had
more than one sub-ops, it went into a loop to make a set of all
functions it needed to add to the hash. If any of the subops hashes
was empty, that would mean to attach to all functions. The error
was that the first iteration of the loop passed in an empty hash to
start with in order to add the other hashes. That starting hash was
mistaken as to attach to all functions. This made the manage ops
attach to all functions whenever it had two or more sub-ops, even
if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for
that function will be added to the manager ops for each subops.
This causes waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is
attached to. It also has a counter of how many fprobes are
attached. When the last fprobe is removed, it unregisters the
fprobe from ftrace but does not remove the functions the last
fprobe was attached to from the hash. This leaves the old functions
attached. When a new fprobe is added, the fprobe infrastructure
attaches to not only the functions of the new fprobe, but also to
the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes
from zero to one, it attaches its ops to ftrace. When an fprobe is
removed, the counter is decremented. If the counter goes from 1 to
zero, it removes the fprobes ops from ftrace.
There was an issue where if two fprobes trace the same function,
the addition of each fprobe would increment the counter. But when
removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not
remove the functions from the ftrace ops.
But it also did not decrement the counter, so when the last fprobe
is removed, the counter is still one. This leaves the fprobes
callback still registered with ftrace and it being called by the
functions defined by the fprobes ops hash. Worse yet, because all
the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions.
Thus, this puts the state of the system where every function is
calling the fprobe callback handler (which does nothing as there
are no registered fprobes), but this causes a good 13% slow down of
the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which
added another layer of preempt disable. As the preempt_count gets
traced in the event, it needs to subtract the amount of preempt
disabling the tracer does to record what the preempt_count was when
the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that
is set by the return of the next() function. The start() function
allocates it and the stop() function frees it. But when the last
item is found, the next() returns NULL which leaks the data that
was allocated in start(). The m->private is used for something
else, so have next() free the data when it returns NULL, as stop()
will then just receive NULL in that case"
* tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak when reading set_event file
ftrace: Correct preemption accounting for function tracing.
selftests/ftrace: Update fprobe test to check enabled_functions file
fprobe: Fix accounting of when to unregister from function graph
fprobe: Always unregister fgraph function from ops
ftrace: Do not add duplicate entries in subops manager ops
ftrace: Fix accounting of adding subops to a manager ops
drivers/i2c/i2c-core-base.c: In function ‘i2c_detect.isra’:
drivers/i2c/i2c-core-base.c:2544:1: warning: the frame size of 1312 bytes is larger than 1024 bytes [-Wframe-larger-than=]
2544 | }
| ^
Fix this by allocating the temporary client structure dynamically, as it
is a rather large structure (1216 bytes, depending on kernel config).
This is basically a revert of the to-be-fixed commit with some
checkpatch improvements.
Fixes: 735668f8e5 ("i2c: core: Allocate temp client on the stack in i2c_detect")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
[wsa: updated commit message, merged tags from similar patch]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files, addressing
both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes.
-----BEGIN PGP SIGNATURE-----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=z1+P
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files,
addressing both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes"
* tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: loongson: loongson2_guts: Add check for devm_kstrdup()
tee: optee: Fix supplicant wait loop
platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
MAINTAINERS: arm: apple: Add Janne as maintainer
MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
core:
- remove MAINTAINERS entry
cgroup/dmem:
- use correct function for pool descendants
panel:
- fix signal polarity issue jd9365da-h3
nouveau:
- folio handling fix
- config fix
amdxdna:
- fix missing header
xe:
- Fix error handling in xe_irq_install
- Fix devcoredump format
i915:
- Use spin_lock_irqsave() in interruptible context on guc submission
- Fixes on DDI and TRANS programming
- Make sure all planes in use by the joiner have their crtc included
- Fix 128b/132b modeset issues
msm:
- More catalog fixes:
- to skip watchdog programming through top block if its not present
- fix the setting of WB mask to ensure the WB input control is programmed
correctly through ping-pong
- drop lm_pair for sm6150 as that chipset does not have any 3dmerge block
- Fix the mode validation logic for DP/eDP to account for widebus (2ppc)
to allow high clock resolutions
- Fix to disable dither during encoder disable as otherwise this was
causing kms_writeback failure due to resource sharing between
WB and DSI paths as DSI uses dither but WB does not
- Fixes for virtual planes, namely to drop extraneous return and fix
uninitialized variables
- Fix to avoid spill-over of DSC encoder block bits when programming
the bits-per-component
- Fixes in the DSI PHY to protect against concurrent access of
PHY_CMN_CLK_CFG regs between clock and display drivers
- Core/GPU:
- Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout
- Only print GMU fw version once, instead of each time the GPU resumes
-----BEGIN PGP SIGNATURE-----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=cuOi
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-02-22' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull request, lots of small things all over, msm has
a bunch of things but all very small, xe, i915, a fix for the cgroup
dmem controller.
core:
- remove MAINTAINERS entry
cgroup/dmem:
- use correct function for pool descendants
panel:
- fix signal polarity issue jd9365da-h3
nouveau:
- folio handling fix
- config fix
amdxdna:
- fix missing header
xe:
- Fix error handling in xe_irq_install
- Fix devcoredump format
i915:
- Use spin_lock_irqsave() in interruptible context on guc submission
- Fixes on DDI and TRANS programming
- Make sure all planes in use by the joiner have their crtc included
- Fix 128b/132b modeset issues
msm:
- More catalog fixes:
- to skip watchdog programming through top block if its not
present
- fix the setting of WB mask to ensure the WB input control is
programmed correctly through ping-pong
- drop lm_pair for sm6150 as that chipset does not have any
3dmerge block
- Fix the mode validation logic for DP/eDP to account for widebus
(2ppc) to allow high clock resolutions
- Fix to disable dither during encoder disable as otherwise this
was causing kms_writeback failure due to resource sharing
between WB and DSI paths as DSI uses dither but WB does not
- Fixes for virtual planes, namely to drop extraneous return and
fix uninitialized variables
- Fix to avoid spill-over of DSC encoder block bits when
programming the bits-per-component
- Fixes in the DSI PHY to protect against concurrent access of
PHY_CMN_CLK_CFG regs between clock and display drivers
- Core/GPU:
- Fix non-blocking fence wait incorrectly rounding up to 1 jiffy
timeout
- Only print GMU fw version once, instead of each time the GPU
resumes"
* tag 'drm-fixes-2025-02-22' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/i915/dp: Fix disabling the transcoder function in 128b/132b mode
drm/i915/dp: Fix error handling during 128b/132b link training
accel/amdxdna: Add missing include linux/slab.h
MAINTAINERS: Remove myself
drm/nouveau/pmu: Fix gp10b firmware guard
cgroup/dmem: Don't open-code css_for_each_descendant_pre
drm/xe/guc: Fix size_t print format
drm/xe: Make GUC binaries dump consistent with other binaries in devcoredump
drm/i915: Make sure all planes in use by the joiner have their crtc included
drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL
drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro
drm/xe: Fix error handling in xe_irq_install()
drm/i915/gt: Use spin_lock_irqsave() in interruptible context
drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk source
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG1 against clock driver
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG0 updated from driver side
drm/msm/dpu: Drop extraneous return in dpu_crtc_reassign_planes()
drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fields
drm/msm/dpu: Disable dither in phys encoder cleanup
drm/msm/dpu: Fix uninitialized variable
...
In polled mode, user calls poll() for read data to be available before
performing a read(). In the duration between these 2 calls, there may be
new data available in the OA buffer. To ensure user reads all available
data, check for latest data in the OA buffer in polled read.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212010255.1423343-1-umesh.nerlige.ramappa@intel.com
-----BEGIN PGP SIGNATURE-----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=L+Lr
-----END PGP SIGNATURE-----
Merge tag 'block-6.14-20250221' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- FC controller state check fixes (Daniel)
- PCI Endpoint fixes (Damien)
- TCP connection failure fixe (Caleb)
- TCP handling C2HTermReq PDU (Maurizio)
- RDMA queue state check (Ruozhu)
- Apple controller fixes (Hector)
- Target crash on disbaled namespace (Hannes)
- MD pull request via Yu:
- Fix queue limits error handling for raid0, raid1 and raid10
- Fix for a NULL pointer deref in request data mapping
- Code cleanup for request merging
* tag 'block-6.14-20250221' of git://git.kernel.dk/linux:
nvme: only allow entering LIVE from CONNECTING state
nvme-fc: rely on state transitions to handle connectivity loss
apple-nvme: Support coprocessors left idle
apple-nvme: Release power domains when probe fails
nvmet: Use enum definitions instead of hardcoded values
nvme: Cleanup the definition of the controller config register fields
nvme/ioctl: add missing space in err message
nvme-tcp: fix connect failure on receiving partial ICResp PDU
nvme: tcp: Fix compilation warning with W=1
nvmet: pci-epf: Avoid RCU stalls under heavy workload
nvmet: pci-epf: Do not uselessly write the CSTS register
nvmet: pci-epf: Correctly initialize CSTS when enabling the controller
nvmet-rdma: recheck queue state is LIVE in state lock in recv done
nvmet: Fix crash when a namespace is disabled
nvme-tcp: add basic support for the C2HTermReq PDU
nvme-pci: quirk Acer FA100 for non-uniqueue identifiers
block: fix NULL pointer dereferenced within __blk_rq_map_sg
block/merge: remove unnecessary min() with UINT_MAX
md/raid*: Fix the set_queue_limits implementations
-----BEGIN PGP SIGNATURE-----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=w+aR
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.14-20250221' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Series fixing an issue with multishot read on pollable files that may
return -EIOCBQUEUED from ->read_iter(). Four small patches for that,
the first one deliberately done in such a way that it'd be easy to
backport
- Remove some dead constant definitions
- Use array_index_nospec() for opcode indexing
- Work-around for worker creation retries in the presence of signals
* tag 'io_uring-6.14-20250221' of git://git.kernel.dk/linux:
io_uring/rw: clean up mshot forced sync mode
io_uring/rw: move ki_complete init into prep
io_uring/rw: don't directly use ki_complete
io_uring/rw: forbid multishot async reads
io_uring/rsrc: remove unused constants
io_uring: fix spelling error in uapi io_uring.h
io_uring: prevent opcode speculation
io-wq: backoff when retrying worker creation
Fix a memory leak in the ACPI platform_profile driver (Kurt Borja).
-----BEGIN PGP SIGNATURE-----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=9xnR
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a memory leak in the ACPI platform_profile driver (Kurt Borja)"
* tag 'acpi-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: platform_profile: Fix memory leak in profile_class_is_visible()
failure and the Qcom raw NAND controller probe failure which are due to
some refactoring, otherwise there has been a series of misc fixes on the
Cadence raw NAND controller driver and especially on the DMA side.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAme4omgACgkQJWrqGEe9
VoS6nQf+MJuHmlOeAInMmoKA6gJ358GIxStkiT88db4NuOtXrWkf9BVcI/LNlHDv
dV1xW0uHbrjnf2teuBk4mD11PbH5lKz738ElBphQWkDbsEq7+l0OiN7ixZ8dF7UK
6qKvP8CLRgz/41elD8Kg0c2x4Tfoxym6G1lrNqt9igkv6/jDgKrP93ScDwmVpS76
DZ3toKGqo2fHuG8sN+qGh1KQIf6DWUUx6E7SJin4cF/dHamYBT60KnVHtftabo60
1HEJcIXc6dIxXWz4Zqcjzogje3ynKhKuFW50qmJJKxE4VzcZIVkS0UpiLNZcJtP4
oulojoBQStASD5ztBP2zq4kGaXo6pQ==
=fjkV
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"The two most important fixes in this list are probably the SST write
failure and the Qcom raw NAND controller probe failure which are due
to some refactoring, otherwise there has been a series of misc fixes
on the Cadence raw NAND controller driver and especially on the DMA
side"
* tag 'mtd/fixes-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: cadence: fix unchecked dereference
mtd: spi-nor: sst: Fix SST write failure
dt-bindings: mtd: cadence: document required clock-names
mtd: rawnand: qcom: fix broken config in qcom_param_page_type_exec
mtd: rawnand: cadence: fix incorrect device in dma_unmap_single
mtd: rawnand: cadence: use dma_map_resource for sdma address
mtd: rawnand: cadence: fix error code in cadence_nand_init()
