mirror of
https://github.com/torvalds/linux.git
synced 2026-10-28 09:35:02 +01:00
014da1db5e
1463469 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Tomasz Pakuła
|
014da1db5e |
drm/edid: parse HDMI 2.1 gaming (ALLM/VRR) capabilities from HF-VSDB
Parse the HDMI 2.1 gaming-related capabilities advertised in the HDMI Forum VSDB (HF-VSDB) and expose them through struct drm_hdmi_info so drivers can consume them. Add struct drm_hdmi_vrr_cap describing the sink's VRR capabilities: Fast VActive (Quick Frame Transport), Negative M VRR, Cinema VRR, MDelta, and the VRRmin/VRRmax range, together with a "supported" flag derived from that range. Add the fapa_start_location and allm (Auto Low Latency Mode) flags to struct drm_hdmi_info. drm_parse_hdmi_gaming_info() reads byte 8 of the HF-VSDB for the FAPA/ALLM/FVA/CNMVRR/CinemaVRR/MDelta flags and bytes 9-10 for VRRmin/VRRmax. Per HDMI 2.1, VRR is considered supported when VRRmin is within 1-48 and VRRmax is either 0 (maximum based on the video mode) or >= 100. It is invoked from drm_parse_hdmi_forum_scds(), and the parsed values are logged for debugging. Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Tested-by: Bernhard Berger <bernhard.berger@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Link: https://patch.msgid.link/20260730171754.704049-2-jerry.zuo@amd.com |
||
|
Mallesh Koujalagi
|
8a04262e0a
|
drm/drv: Convert wedged event string building to seq_buf
event_string[] has a fixed size of WEDGE_STR_LEN (32) bytes. The original scnprintf()-based loop required a manual pre-flight bounds check. Replace the manual bookkeeping with seq_buf, which tracks overflow internally. seq_buf_printf() writes each "method," token into the buffer. On overflow, a warning is issued, len retains the position of the last successful write, so the trailing comma is stripped cleanly without including any partial method name in the uevent payload. Assisted-by: Claude:claude-Sonnet-4.6 Signed-off-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Link: https://patch.msgid.link/20260823003349.587495-2-mallesh.koujalagi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> |
||
|
Sean Chang
|
ec99b095ae |
drm/ttm: make ttm_swap_ops static
ttm_swap_ops is not used outside ttm_bo.c and is not exported via EXPORT_SYMBOL(), so give it static linkage to keep it file-local and avoid polluting the global symbol namespace. Signed-off-by: Sean Chang <seanwascoding@gmail.com> Link: https://lore.kernel.org/r/20260818160914.108313-3-seanwascoding@gmail.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> |
||
|
Sean Chang
|
59b68932fe |
drm/ttm: drop stale @ctx kernel-doc entry
ttm_bo_alloc_state no longer has a ctx member, but its kernel-doc comment still documents @ctx. Remove the stale entry so the documentation matches the struct. Signed-off-by: Sean Chang <seanwascoding@gmail.com> Link: https://lore.kernel.org/r/20260818160914.108313-2-seanwascoding@gmail.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> |
||
|
Michael Kelley
|
315caca109
|
drm_hyperv: Remove support for synth video protocol of old Hyper-V hosts
With the overall removal of Linux support for running on Hyper-V hosts earlier than WS2016 and Windows 10, it's no longer necessary to support older synthetic video protocols. Remove the support. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com> Link: https://patch.msgid.link/20260805203751.2678-5-mhklinux@outlook.com |
||
|
Dawid Osuchowski
|
66159dccf1 |
accel/ivpu: Use drm_warn_ratelimited macro
Fix ivpu_warn_ratelimited() to properly use WARN logging level instead of an ERROR. Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Link: https://patch.msgid.link/20260820104811.803146-3-dawid.osuchowski@linux.intel.com |
||
|
Dawid Osuchowski
|
2d697fd246 |
drm/print: add drm_warn_ratelimited logging macro
Add a drm_warn_ratelimited() macro to complement the existing drm_err_ratelimited(), providing rate-limited logging at warning level for drivers that need it. Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Link: https://patch.msgid.link/20260820104811.803146-2-dawid.osuchowski@linux.intel.com |
||
|
Haikun Zhou
|
ae3592a2b5 |
drm/panel-edp: Support MNE007QS3-F and TM140VDXP15 edp panel
MNE007QS3-F raw edid: 00 ff ff ff ff ff ff 00 0e 77 87 14 00 00 00 00 0f 24 01 04 a5 1e 13 78 03 2c c5 94 5c 59 95 29 1e 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 35 30 80 a0 70 b0 24 40 30 20 66 00 2d bc 10 00 00 1a 00 00 00 fd 00 28 3c 4b 4b 10 01 0a 20 20 20 20 20 20 00 00 00 fe 00 3d 4c 20 20 20 20 20 20 20 20 20 20 ff 00 00 00 fc 00 4d 4e 45 30 30 37 51 53 33 2d 46 0a 20 01 41 70 20 79 02 00 21 00 1d c8 0b 5d 07 80 07 b0 04 80 3f 79 5c 9e 05 95 9c f2 1d 02 45 54 b0 5c b0 5c 00 42 12 78 22 00 14 8c 5a 02 85 7f 07 9f 00 2f 80 1f 00 af 04 23 00 05 00 05 00 2b 00 0c 27 00 28 3b 00 00 27 00 28 3b 00 00 2e 00 06 00 42 b0 5c b0 5c 81 00 1e 72 1a 00 00 03 01 28 3c 00 00 53 ff 53 ff 3c 00 00 00 00 e3 05 04 00 e6 06 01 01 53 53 ff 00 00 00 00 00 00 00 00 00 7e 90 TM140VDXP15 raw edid: 00 ff ff ff ff ff ff 00 51 a1 37 21 00 00 00 00 0b 24 01 04 a5 1e 13 78 03 2b a5 97 5b 57 8c 28 20 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 24 31 80 a0 70 b0 3c 40 30 20 a6 00 2d bc 10 00 00 1a 00 00 00 fd 00 28 3c 4c 4c 10 01 0a 20 20 20 20 20 20 00 00 00 fe 00 3d 4c 20 20 20 20 20 20 20 20 20 20 ff 00 00 00 fc 00 54 4d 31 34 30 56 44 58 50 31 35 0a 20 01 dd 70 20 79 02 00 21 01 1d c2 0b 58 07 80 07 b0 04 80 71 69 5b 79 d5 8c 87 82 20 02 45 54 b0 5c b0 5c 00 42 12 78 22 00 14 3f 66 02 85 7f 07 9f 00 2f 80 1f 00 af 04 3b 00 05 00 05 00 2b 00 0c 27 00 28 3b 00 00 27 00 28 3b 00 00 2e 00 06 00 42 b0 5c b0 5c 81 00 17 72 1a 00 00 03 01 28 3c 00 00 53 ff 53 ff 3c 00 00 00 00 e3 05 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 90 Signed-off-by: Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patch.msgid.link/20260820012554.4038893-1-zhouhaikun5@huaqin.corp-partner.google.com |
||
|
Maxime Ripard
|
d3d1e0c434
|
drm/tegra: Convert to atomic_create_state
The plane reset implementation creates a custom state subclass, but only initializes a pristine state without resetting any hardware. This is equivalent to what atomic_create_state expects. Convert to it. Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-60-82d2963dd134@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Maxime Ripard
|
5a7530adce
|
drm/vc4: Convert to atomic_create_state
The plane reset implementation creates a custom state
subclass, but only initializes a pristine state without resetting any
hardware. This is equivalent to what atomic_create_state expects.
Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-57-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
eec66e23e8
|
drm/msm/mdp5: Convert to atomic_create_state
The plane reset implementation creates a custom state
subclass, but only initializes a pristine state without resetting any
hardware. This is equivalent to what atomic_create_state expects.
Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-50-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
b599e05cd5
|
drm/msm/dpu1: Convert to atomic_create_state
The plane reset implementation creates a custom state
subclass, but only initializes a pristine state without resetting any
hardware. This is equivalent to what atomic_create_state expects.
Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-49-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
f24a2a0798
|
drm/malidp: Convert to atomic_create_state
The plane reset implementation creates a custom state
subclass, but only initializes a pristine state without resetting any
hardware. This is equivalent to what atomic_create_state expects.
Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-42-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
0f54497a8c
|
drm/komeda: Convert to atomic_create_state
The plane reset implementation creates a custom state
subclass, but only initializes a pristine state without resetting any
hardware. This is equivalent to what atomic_create_state expects.
Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-41-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
288c9f832e
|
drm/sun4i: sun8i: Convert to atomic_create_state
The plane only initializes a pristine state in its reset hook
using drm_atomic_helper_plane_reset(), which is equivalent to what
atomic_create_state expects. Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-32-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
8307577645
|
drm/msm/mdp4: Convert to atomic_create_state
The plane only initializes a pristine state in its reset hook
using drm_atomic_helper_plane_reset(), which is equivalent to what
atomic_create_state expects. Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-24-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
7075ff51eb
|
drm/meson: Convert to atomic_create_state
The plane only initializes a pristine state in its reset hook
using drm_atomic_helper_plane_reset(), which is equivalent to what
atomic_create_state expects. Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-23-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
f4ff2730de
|
drm/ingenic: Convert to atomic_create_state
The plane only initializes a pristine state in its reset hook
using drm_atomic_helper_plane_reset(), which is equivalent to what
atomic_create_state expects. Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-19-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
a8e88a7e84
|
drm/imx/dcss: Convert to atomic_create_state
The plane only initializes a pristine state in its reset hook
using drm_atomic_helper_plane_reset(), which is equivalent to what
atomic_create_state expects. Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-18-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
fc16c87942
|
drm/hdlcd: Convert to atomic_create_state
The plane only initializes a pristine state in its reset hook
using drm_atomic_helper_plane_reset(), which is equivalent to what
atomic_create_state expects. Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-14-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
3d95f93b30
|
drm/appletbdrm: Convert to atomic_create_state
The plane reset implementation creates a custom state subclass, but
only initializes a pristine state without resetting any hardware. This
is equivalent to what atomic_create_state expects. Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Acked-by: Aditya Garg <gargaditya08@proton.me>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-10-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
c159654270
|
drm/st7920: Convert to atomic_create_state
The plane reset implementation creates a custom state subclass, but
only initializes a pristine state without resetting any hardware. This
is equivalent to what atomic_create_state expects. Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Reviewed-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-9-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
932d6e27e4
|
drm/ssd130x: Convert to atomic_create_state
The plane reset implementation creates a custom state subclass, but
only initializes a pristine state without resetting any hardware. This
is equivalent to what atomic_create_state expects. Convert to it.
The conversion was done using the following Coccinelle semantic patch:
@@
identifier funcs;
symbol drm_atomic_helper_plane_reset;
symbol drm_atomic_helper_plane_create_state;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = drm_atomic_helper_plane_reset,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
...,
};
@match_struct_reset@
identifier funcs, reset_func;
@@
struct drm_plane_funcs funcs = {
...,
.reset = reset_func,
...,
};
@reset_uses_helpers depends on match_struct_reset@
identifier match_struct_reset.reset_func;
@@
void reset_func(...)
{
<+...
(
__drm_atomic_helper_plane_reset(...);
|
__drm_gem_reset_shadow_plane(...);
)
...+>
}
@match_struct_destroy@
identifier funcs, destroy_func;
@@
struct drm_plane_funcs funcs = {
...,
.atomic_destroy_state = destroy_func,
...,
};
@script:python renamed_func@
old_name << match_struct_reset.reset_func;
new_name;
@@
if old_name.endswith("_reset"):
coccinelle.new_name = old_name.replace("_reset", "_create_state")
else:
coccinelle.new_name = old_name
@update_struct depends on match_struct_reset && reset_uses_helpers@
identifier match_struct_reset.funcs, match_struct_reset.reset_func;
identifier renamed_func.new_name;
@@
struct drm_plane_funcs funcs = {
...,
- .reset = reset_func,
+ .atomic_create_state = new_name,
...,
};
@drop_destroy depends on update_struct && match_struct_destroy@
identifier match_struct_reset.reset_func;
identifier match_struct_destroy.destroy_func;
identifier container_func;
identifier P;
symbol drm_atomic_helper_plane_destroy_state;
symbol __drm_atomic_helper_plane_destroy_state;
@@
void reset_func(struct drm_plane *P)
{
...
(
- if (P->state) {
- <+...
(
- drm_atomic_helper_plane_destroy_state(P, P->state);
|
- __drm_atomic_helper_plane_destroy_state(P->state);
|
- P->funcs->atomic_destroy_state(P, P->state);
|
- destroy_func(P, P->state);
)
- ...+>
- }
|
- drm_WARN_ON_ONCE(P->dev, P->state);
|
- WARN_ON(P->state);
)
...
(
- kfree(P->state);
|
- kfree(container_func(P->state));
|
// kfree is optional
)
(
- P->state = NULL;
|
// plane->state clearing is optional
)
...
}
@drop_destroy_mtk depends on update_struct@
identifier P;
symbol __drm_atomic_helper_plane_destroy_state;
symbol to_mtk_plane_state;
@@
void mtk_plane_reset(struct drm_plane *P)
{
...
- if (P->state) {
- __drm_atomic_helper_plane_destroy_state(P->state);
- ...
- } else {
...
- }
...
}
@transform_nv50_wndw depends on update_struct@
identifier S;
@@
void nv50_wndw_reset(...)
{
...
- if (WARN_ON(!(S = kzalloc_obj(*S))))
+ S = kzalloc_obj(*S);
+ if (WARN_ON(!S))
return;
...
}
@transform_kzalloc depends on update_struct@
identifier match_struct_reset.reset_func;
identifier P, S;
statement ST;
statement list STL;
@@
void reset_func(struct drm_plane *P)
{
<...
S = kzalloc_obj(*S);
(
- if (S)
- {
- STL
- }
+ if (!S) return;
+
+ STL
|
- if (S) ST
+ if (!S) return;
+
+ ST
)
...>
}
@transform_body depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier S, P;
expression PS;
@@
- void reset_func(struct drm_plane *P)
+ struct drm_plane_state *new_name(struct drm_plane *P)
{
...
S = kzalloc_obj(*S);
...
(
if (!S) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (WARN_ON(!S)) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
|
if (S == NULL) {
...
- return;
+ return ERR_PTR(-ENOMEM);
}
)
...
(
- __drm_atomic_helper_plane_reset(P, PS);
+ __drm_atomic_helper_plane_state_init(PS, P);
|
- __drm_gem_reset_shadow_plane(P, PS);
+ __drm_gem_shadow_plane_state_init(P, PS);
)
...
}
@update_early_return depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
<+...
- return;
+ return ERR_PTR(-EINVAL);
...+>
}
@update_return_plane depends on update_struct@
identifier match_struct_reset.reset_func;
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_atomic_helper_plane_state_init(PS, P);
...
+
+ return PS;
}
@update_return_shadow depends on update_struct@
identifier renamed_func.new_name;
identifier P;
expression PS;
@@
struct drm_plane_state *new_name(struct drm_plane *P)
{
...
__drm_gem_shadow_plane_state_init(P, PS);
...
+
+ return &PS->base;
}
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-8-82d2963dd134@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
||
|
Maxime Ripard
|
7f87928439
|
drm/simple-kms: Switch to atomic_create_state
drm_simple_kms_plane_reset() handled three cases: delegating to reset_plane, using create_plane_state with manual teardown, or falling back to the default helper. This complexity existed to bridge the old reset hook with the new create_plane_state hook during the transition. Now that all simple-kms drivers implement create_plane_state instead of reset_plane, replace drm_simple_kms_plane_reset() with drm_simple_kms_plane_create_state() which only dispatches between create_plane_state and drm_atomic_helper_plane_create_state(). Wire it to .atomic_create_state instead of .reset. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-7-82d2963dd134@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Maxime Ripard
|
7e8bd554c3
|
drm/sysfb: Convert to atomic_create_state
drm_sysfb_plane_reset() handles both state creation and teardown of the previous state through the reset hook, which conflates initial state allocation with hardware and software reset at resume. Convert it to drm_sysfb_plane_atomic_create_state(), which only allocates and initializes a pristine state using __drm_gem_shadow_plane_state_init(). Update DRM_SYSFB_PLANE_FUNCS to use .atomic_create_state instead of .reset. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-6-82d2963dd134@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Maxime Ripard
|
56a1eb3f59
|
drm/gem-atomic-helper: Remove drm_gem_reset_shadow_plane()
drm_gem_reset_shadow_plane() is no longer used: all callers now go through drm_gem_create_shadow_plane_state() via the atomic_create_state hook. Remove it. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-5-82d2963dd134@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Maxime Ripard
|
0316901a73
|
drm/gem-atomic-helper: Switch DRM_GEM_SHADOW_PLANE_FUNCS to atomic_create_state
DRM_GEM_SHADOW_PLANE_FUNCS currently sets .reset to drm_gem_reset_shadow_plane. Since drm_gem_create_shadow_plane_state() now exists and only handles pristine state allocation without conflating it with hardware or suspend/resume reset, switch the macro to use .atomic_create_state instead. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-4-82d2963dd134@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Maxime Ripard
|
d5460f6a27
|
drm/gem-atomic-helper: Convert simple-kms shadow helpers to create_plane_state
drm_gem_simple_kms_reset_shadow_plane() implements the reset_plane hook for simple-kms shadow-buffered planes. Since the reset hook conflates initial state creation with hardware and software reset during suspend/resume, convert it to the create_plane_state pattern. Replace it with drm_gem_simple_kms_create_shadow_plane_state(), which implements the create_plane_state hook using drm_gem_create_shadow_plane_state(). Update DRM_GEM_SIMPLE_DISPLAY_PIPE_SHADOW_PLANE_FUNCS accordingly. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-3-82d2963dd134@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Maxime Ripard
|
3dcb0564c5
|
drm/gem-atomic-helper: Create drm_gem_create_shadow_plane_state()
The GEM shadow-plane helpers only expose reset functions (drm_gem_reset_shadow_plane and __drm_gem_reset_shadow_plane) that handle both the initial state allocation and the reset path. The new atomic_create_state hook requires a function that only allocates and initializes a pristine state without any side effect. Create __drm_gem_shadow_plane_state_init() to initialize a pre-allocated shadow plane state, and drm_gem_create_shadow_plane_state() to allocate and initialize one from scratch. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-2-82d2963dd134@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Maxime Ripard
|
a8a198cefe
|
drm/simple-kms: Add create_plane_state hook
The simple-kms helper provides a reset_plane hook to let drivers override the default plane reset. However, the reset hook is overloaded: it is used to create the initial software state at probe time, but also to reset both the hardware and software state during suspend/resume. These two roles have different expectations, and reset is not fallible which makes error handling difficult. The atomic_create_state pattern was introduced to untangle this by providing a hook that only allocates and initializes a pristine state without any side effect. Add a create_plane_state hook to struct drm_simple_display_pipe_funcs. When provided, drm_simple_kms_plane_reset() will use it to allocate a fresh state, falling back to reset_plane and then to the default drm_atomic_helper_plane_reset(). This will allow simple-kms drivers to be converted to the atomic_create_state pattern. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260814-drm-no-more-plane-reset-v2-1-82d2963dd134@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Marek Vasut
|
e3eca845ef |
drm: of: Fix drm_of_get_data_lanes_count_ep() return value documentation
Update drm_of_get_data_lanes_count_ep() return value documentation
to match the drm_of_get_data_lanes_count() return value documentation.
The drm_of_get_data_lanes_count_ep() is only a wrapper around the
drm_of_get_data_lanes_count() and therefore returns the same error
codes.
Simplify the return code description of drm_of_get_data_lanes_count()
and drm_of_get_data_lanes_count_ep() to -ENODATA and -EINVAL.
Fixes:
|
||
|
Ivaylo Dimitrov
|
699e5975e2 |
drm/omap: Report HDMI hotplug events to the ASoC HDMI codec
The OMAP HDMI audio driver currently has no way of reporting HDMI cable hotplug events to ASoC. As a result, user space cannot detect HDMI audio availability through the standard jack mechanism and audio policy managers cannot automatically route audio to or from the HDMI output. Add an optional HPD callback to `omap_hdmi_audio_pdata` and invoke it from the DRM HDMI bridge whenever the connector status changes. The HDMI audio driver registers an ASoC jack and reports `SND_JACK_AVOUT` state changes in response to these notifications. Also fix the disconnect path by taking a runtime PM reference before updating the CEC physical address. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Link: https://patch.msgid.link/20260819171935.233946-1-ivo.g.dimitrov.75@gmail.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> |
||
|
Andreas Kemnade
|
20207f7838 |
drm/omap: dsi: avoid sending bta sync all the time in writes
Some chips need configuration commands to be sent first, before they can
send data. TC358762 for example needs PPI_LPTXTIMECNT configured
and PPI_STARTPPI set to 1 to be able to transmit anything. To be able to
configure such chips, do not send bta sync during writes if no acks are
requested. Instead just wait for the packet to be sent to avoid FIFO
overflows. There might be more to do about acks, but there seem to be
virtually no users of that flag.
This came to light when fiddling with the Epson Moverio BT-200 display
which consists of 2 TC358762 bridges with SPI funneled through
to the unknown display chip. With that patch the bridge can be accessed,
Reading back registers works, when the above-mentioned registers are set.
In Command-Mode update, there was a nop sent, apparently the most
relevant part was the bta sync to actually force low power mode.
Video mode panel at OMAP4 (BT-200) and video mode at OMAP5 was tested.
Fixes:
|
||
|
Marek Czernohous
|
843bc34db9 |
drm/nouveau: don't dereference outp before checking it in nouveau_dp_irq
nouveau_dp_irq() looks the encoder up and dereferences it in the same breath, five lines before testing it: struct nouveau_encoder *outp = find_encoder(connector, DCB_OUTPUT_DP); struct nouveau_drm *drm = nouveau_drm(outp->base.base.dev); ... if (!outp) return; find_encoder() walks the connector's possible encoders and returns NULL when none of them matches the requested type, so the NULL test is not decoration: it is the author saying this can happen. The initialiser above it dereferences the same pointer regardless. The NULL test predates the dereference. commit |
||
|
Marek Czernohous
|
f60849975a |
drm/nouveau: cancel the DP IRQ work before freeing the connector
nouveau_connector_destroy() tears the two nvif events down and then
frees the connector, but never cancels the work the IRQ event queues:
nvif_event_dtor(&nv_connector->irq);
nvif_event_dtor(&nv_connector->hpd);
kfree(nv_connector->edid);
...
kfree(connector);
nouveau_connector_irq() queues that work unconditionally:
schedule_work(&nv_connector->irq_work);
return NVIF_EVENT_KEEP;
A DP IRQ arriving just before nvif_event_dtor() therefore leaves
nv_connector->irq_work on the system queue past the kfree(). When it
runs, nouveau_dp_irq() derives both nv_connector and connector from the
work_struct and dereferences them, and goes on to take
outp->dp.hpd_irq_lock.
There is no cancel_work_sync() for irq_work anywhere in the driver, so
nothing else covers this. Add it after the event teardown, where no
further work can be queued, and before anything is freed.
Reported by the Sashiko review bot as a pre-existing issue, in its review
of an earlier nv04 FIFO series of mine, and confirmed against the source.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260812231330.705425-1-mczernohous@gmail.com?part=1
Fixes:
|
||
|
Marek Czernohous
|
827eb9328e |
drm/nouveau: disable the fence uevent work instead of just cancelling it
nouveau_fence_context_del() drains the uevent work while the event that feeds it is still armed: cancel_work_sync(&fctx->uevent_work); nouveau_fence_context_kill(fctx, 0); nvif_event_dtor(&fctx->event); nouveau_fence_wait_uevent_handler() queues the work unconditionally: schedule_work(&fctx->uevent_work); return NVIF_EVENT_KEEP; so a non-stall interrupt arriving after cancel_work_sync() has returned re-arms the work that was just drained. The window closes in two steps, neither of which is the drain. The kill blocks the event when the last fence holding a notify_ref is signalled, which reaches atomic_xchg(&ntfy->allowed, 0) (nvkm/core/event.c:104), and nvkm_event_ntfy() skips a ntfy that is not allowed (:183). That stops further handlers from starting, but not one that is already inside nvkm_event_ntfy(): the event is created with wait = false (nouveau_fence.c:201), so nvkm_event_ntfy_block_() leaves it on the list and never takes event->list_lock. Only nvif_event_dtor() waits that one out: nvkm_event_ntfy_del() (:141) goes through nvkm_event_ntfy_remove(), which takes write_lock_irq() on that same list_lock (:84). Either way the re-arm happens after the drain, and the caller drops its reference immediately afterwards, for example nv84_fence_context_del(): nouveau_fence_context_del(&fctx->base); chan->fence = NULL; nouveau_fence_context_free(&fctx->base); That is a kref_put() on fctx->fence_ref, so the context outlives the teardown only while emitted fences still hold a reference of their own. That is no safety net: whenever none do, the count reaches zero right there and nouveau_fence_context_put() kfree()s fctx while the work is still queued. &fctx->uevent_work is embedded in that allocation, so the workqueue already dereferences freed memory when it picks the item up, and nouveau_fence_uevent_work() can then take fctx->lock on it. With CONFIG_DEBUG_OBJECTS_WORK and CONFIG_DEBUG_OBJECTS_FREE, kfree() of a still-queued work item is reported as the free of an active object. On live memory the re-armed work has nothing left to do: nouveau_fence_context_kill() empties fctx->pending and sets fctx->killed under fctx->lock, nouveau_fence_emit() then returns -ENODEV rather than queueing anything new, and nouveau_fence_update() only reaches nvif_event_block() if it signalled something off that list. The defect is the access to freed memory, not what the work would have found. Only chips from G84 on can reach this at all: nouveau_fence_context_new() returns before nvif_event_ctor() when priv->uevent is clear, and nv84_fence_create() is the only place that sets it. nv84_fence_context_del() is the context_del for all of those, because nvc0_fence_create() and gv100_fence_create() build on nv84_fence_create() and override only context_new. Use disable_work_sync() instead. It drains the work exactly like cancel_work_sync() does, and additionally increments the work item's disable count, after which "any attempt to queue @work will fail and return %false" (kernel/workqueue.c, disable_work()). The handler's schedule_work() then has nothing to re-arm, and the teardown order stays as it is. Draining a second time after nvif_event_dtor() would close the window as well, and without the newer API: once nvkm_event_ntfy_remove() has returned, no handler can start or still be running, so nothing re-arms the work past that point. disable_work_sync() is preferred here because it needs one synchronisation point instead of two, it keeps the work from being queued at all rather than cleaning up after it, and it is what drm has settled on for this (drm/xe, drm/panthor, drm_pagemap). Blocking the event rather than the work is not an option: fctx->event is created with wait = false, so a handler already inside nvkm_event_ntfy() can still queue the work. Note for backports: disable_work_sync() arrived in v6.10 with commit |
||
|
Adrián Larumbe
|
8aee06aa4c |
drm/panfrost: Remove unnecessary header file include
None of panfrost_features.h definitions are used in panfrost_device.c Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patch.msgid.link/20260820-b4-panfrost-fixes-v1-3-1b2c2376f4bc@collabora.com Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> |
||
|
Adrián Larumbe
|
fd4227f035 |
drm/panfrost: Prevent division by 0
When updating and debug-printing devfreq stats, in the very unlikely
off-chance that total device time is less than 100 ns, division by 0
would happen. Fix the divisor when relevant and rearrange operands.
Reported-by: Claude <noreply@anthropic.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/work_items/88
Fixes:
|
||
|
Adrián Larumbe
|
a34340574b |
drm/panfrost: Check another bo field for cache option query
When querying the properties of a BO, whether it was created in
Writeback caching mode for userspace mappings, is recorded in a Panfrost
BO's wb_mmap field.
Reported-by: Claude <noreply@anthropic.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/work_items/88
Fixes:
|
||
|
Chen-Yu Tsai
|
063019ac51 |
drm/verisilicon: Switch to drm_fb_dma_get_addr() for framebuffer addresses
The verisilicon driver has a custom framebuffer address calculating
helper that the common drm_fb_dma_get_addr() can substitute.
Differences from drm_fb_dma_get_addr():
- Uses drm_format_info_min_pitch() to calculate the horizontal offset;
however the driver does not support any of the blocked formats, so
this just ends up being the same as in drm_fb_dma_get_addr():
"cpp[plane] * y"
- Uses clipped source coordinates instead of non-clipped coordinates
as in drm_fb_dma_get_addr();
For the primary plane this doesn't matter, since the primary plane
must match the output, i.e. it cannot be clipped. Also this driver
doesn't support scaling.
For the cursor plane this seems wrong, as the clipping seems to be
done by the hardware, and thus the buffer address should be unclipped.
As such, it should be fine to use the common helper and drop the custom
code.
Tested-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Fixes:
|
||
|
Icenowy Zheng
|
6575bb5d0d |
drm: verisilicon: fix cursor offset field update
The 4th argument of regmap_update_bits() expects a pre-shifted register
value instead of the field value when it's used to set a single field,
however I forgot this when writing the code setting the cursor X/Y
offset fields, thus the write operation doesn't happen at all (because
of the non-shifted values being masked by regmap_update_bits()).
Fix this problem so the cursor is correctly clipped.
The framebuffer address is also clipped so the cursor offset problem was
previously not discovered, and the framebuffer address deserves another
fix for proper cursor behavior when it's clipped.
Fixes:
|
||
|
Suraj Kandpal
|
b90caca515 |
drm/dp: Add EDP_20 rev definition
Add EDP_20 DPCD revision definition. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patch.msgid.link/20260804054806.1110078-1-suraj.kandpal@intel.com |
||
|
Marek Czernohous
|
354d47fb3f |
drm/nouveau/pci: use config-space MSI rearm on MCP79/MCP7A (NVAC)
NVAC (MCP79/MCP7A) uses g94_pci_func, whose .msi_rearm is nv40_pci_msi_rearm(): a re-arm write through the MMIO mirror of PCI config space. On this IGP that path is unreliable; when a re-arm is missed the interrupt line stays dead, command submission times out and the GPU appears hung until reboot. On an Apple Mac mini (early 2009, MCP79, boot0 0x0ac080b1) this showed as sporadic fifo timeouts and GPU hangs under load unless MSI was disabled via config=NvMSI=0. Give NVAC its own pci func that re-arms through real PCI config space (nv46_pci_msi_rearm) instead. This follows existing precedent: nv46.c documents the MMIO-mirror re-arm as broken on several related parts, and commit |
||
|
Zhenhao Wan
|
b46ddaf082 |
drm/nouveau/svm: drain fault handler before freeing svmm
The SVM fault handler nouveau_svm_fault() looks up each fault's
nouveau_svmm under svm->mutex, caches it in the fault array, then drops
svm->mutex and dereferences the svmm across blocking faults
(mmu_interval_notifier_insert(), hmm_range_fault()).
nouveau_svmm is not refcounted. On DRM file close nouveau_svmm_fini() ->
mmu_notifier_put() frees it asynchronously via call_srcu() without
waiting for the handler, and mmget_not_zero() pins the mm, not the svmm.
flush_work() on the fault buffer otherwise runs only at device removal
and suspend, never on close, so a fault handled concurrently with a close
can dereference a freed svmm.
The instance is already unlinked by nouveau_svmm_part() earlier in the
same close, so no new fault can resolve to it. Drain the handler in
nouveau_svmm_fini() before the free, guarding the flush with a NULL check
on drm->svm: on device teardown nouveau_svm_fini() runs first and frees
drm->svm (NULL) after blocking the notify and flushing the buffer, so the
handler is already drained; on per-client close drm->svm is alive and the
flush runs.
Fixes:
|
||
|
Zhenhao Wan
|
38125d38d8 |
drm/nouveau: reject zero-size notifier object allocation
nouveau_abi16_ioctl_notifierobj_alloc() passes the userspace-controlled
info->size to nvkm_mm_head() as both size_max and size_min without a lower
bound. A zero size satisfies the allocator's "e - s < size_min" gate
(size_min == 0 makes the unsigned comparison inert) and yields a
zero-length node, after which
args.limit = ntfy->node->offset + ntfy->node->length - 1;
underflows (offset 0, length 0 -> 0xffffffff) into an oversized ~4 GiB DMA
window. The dma object constructor only rejects start > limit, so the
validly ordered [base, base + 0xffffffff] range passes and is programmed
into the GPU DMA context. The ioctl is DRM_RENDER_ALLOW, so any render
node client can trigger this on pre-Fermi hardware.
Reject a zero-size request before allocating anything.
Fixes:
|
||
|
Philipp Stanner
|
0e118b936d |
drm/sched: Lock drm_sched_entity_is_idle()
drm_sched_entity_is_idle() contains a badly documented memory barrier and an invalid lockless access to entity->stopped. Moreover, it also accesses entity->list which is at all other places protected by entity->lock. This function is in no way performance critical, so it is safer, more readable and more maintainable to take the spinlock. Add locking to drm_sched_entity_is_idle(). Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20260813094539.2407911-2-phasta@kernel.org |
||
|
Osama Abdelkader
|
5d2584e2ff |
drm/bridge: chipone-icn6211: use devm_mipi_dsi_attach
Follow up on the previous devm_drm_bridge_add() conversion by converting the remaining manual cleanup in chipone-icn6211 to the managed helper. Suggested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patch.msgid.link/20260521212529.151493-1-osama.abdelkader@gmail.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> |
||
|
Lyude Paul
|
09b47186a4 |
drm/nouveau/gsp: Increase delay for magic sleep in r535_gsp_fini()
As it turns out, Turing isn't the only architecture that needs this. On
this Dell Precision 7780 with an AD103 GPU, along with pretty much every
other laptop I tested, runtime PM is still somewhat unreliable. At first
glance it seems as if it's fixed, but lowering the autosuspend delay to
500ms and then doing a stress test of suspend/resume cycles on the GPU ends
up causing everything to start timing out.
After quite a lot of digging, I eventually landed back on this magic
timeout in r535_gsp_fini(). As it turns out, increasing the timeout ends up
fixing the runtime PM issues as far as I can tell, even during intense
stress testing.
Unfortunately after spending quite a bit of time trying to dig through
OpenRM to figure out what this magic sleep is actually doing, I've also
come up short with any reasonable explanation. In lieu of that, I'm going
to include the observations I did make while trying to figure this out in
hopes someone eventually does figure this out:
* The magic sleep has to occur after fbsr is initialized. Performing it at
any time before that doesn't appear to work.
* In situations where runtime PM starts getting flaky, some rather
interesting visual effects end up happening on occasion before the GPU
fully falls over. In particular, squares that look like the result of an
incomplete blitting operation to a tiled buffer end up showing up on
applications like vkcube. Interestingly enough, they remain in precisely
the same place between runtime PM cycles until the GPU falls over - even
when restarting vkcube multiple times, and even when vkcube is actively
updating the screen. Even more interestingly, they're not limited to a
specific framebuffer - you can see the squares changing as the cube
rotates around.
We cannot however, say that this is likely to be a incomplete fbsr
operation. The magic sleep happens before fbsr is actually saved (which
happens on the GSP unload), so it's something else.
* During a short bit of testing with a desktop that I have, the magic sleep
seemed to make no difference to whether or not suspend/resume works. It
seems to generally work almost always. So we can assume this is likely
exclusive to runtime PM, not S3.
As well, here's a list of the things I tried before settling on the magic
sleep:
* Hooking up NV2080_CTRL_CMD_INTERNAL_GCX_ENTRY_PREREQUISITE and then
blocking runtime PM until OpenRM signals that GC6/GCOFF is ready appears
to make no difference.
* Hooking up some (maybe not all, unsure about that part) bits of comptag
saving including:
* Fetching static memsys information from GSP
* Adding the size of the comptag storage to the fbsr data
* Adding a GA103+ workaround for disabling raw compression mode during
fbsr (it doesn't seem like it applies for any systems I tried it on
anyhow)
* Setting bPreserveVideoMemoryAllocations=1 in GspSystemInfo
So, until we can figure this out properly - just sleep for longer.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
|
||
|
Lyude Paul
|
ca57629b3e |
drm/nouveau/gsp/r570: Enable S/R Display workaround in GSP
There's two flags that we've never been setting when asking GSP to suspend
the GPU, which OpenRM does set:
GPU_STATE_FLAGS_PRESERVING
GPU_STATE_FLAGS_PM_TRANSITION
These flags aren't -supposed- to do much in GSP, they're mostly used by
OpenRM itself for state tracking. The only thing they do from GSP's side is
control whether or not a single display related workaround is applied
during suspend.
But as it turns out, that single workaround is actually quite crucial for
getting runtime PM working with nouveau - and without it set we end up
seeing a lot more failures with runtime PM resume. So, let's start setting
it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
|
||
|
Lyude Paul
|
c7abe771e0 |
drm/nouveau/gsp/r570: Set GcOff = 0 in fbsr
Previously, it looked as if we were able to fix suspend/resume on some
desktops by setting Gcoff based on whether or not we were entering runtime
PM. This was a mistake though - the only time suspend/resume would end up
actually working was if Gcoff = 0.
It seems like it's likely the main reason for this is the FBSR GcOff
argument actually controls GSP's behavior with regards to which buffers it
decides to save across suspend/resume. When GcOff = 1, RM reserved regions
are saved unless they are marked as LOST_ON_SUSPEND, and RM channel-context
and kernel-client buffers are also saved -including- when they are
LOST_ON_SUSPEND. This means with GcOff = 1, we end up having GSP save and
restore buffers that actually need to be reinitialized on resume - causing
the failures we're setting.
Thanks to John Hubbard from Nvidia for providing some background on what
these options do in the GSP firmware do!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
|