Convert the Mikrotik RouterBoard RB532 to use GPIO descriptors
by defining a software node for the GPIO chip, then register
the button platform device with full info passing the GPIO
as a device property.
This can be used as a base to move more of the RB532 devices
over to passing GPIOs using device properties.
Use the GPIO_ACTIVE_LOW flag and drop the inversion in the
rb532_button_pressed() function.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
bootcmdline_scan_chosen() fetches the raw flat-DT bootargs property and
passes it straight to bootcmdline_append(). That helper later feeds the
same pointer into strlcat(), which computes strlen(src) before copying.
Flat DT properties are external boot input, and this path does not
prove that bootargs is NUL-terminated within its declared bounds.
Reject unterminated bootargs properties before appending them to the
kernel command line.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The 'struct gpio' is not used in the code, remove unneeded forward declaration.
This seems to be a leftover for a 5 years.
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit under Fixes moved recomputing the window clamp to
tcp_measure_rcv_mss() (when scaling_ratio changes).
I suspect it missed the fact that we don't recompute the clamp
when rcvbuf is set. Until scaling_ratio changes we are
stuck with the old window clamp which may be based on
the small initial buffer. scaling_ratio may never change.
Inspired by Eric's recent commit d1361840f8 ("tcp: fix
SO_RCVLOWAT and RCVBUF autotuning") plumb the user action
thru to TCP and have it update the clamp.
A smaller fix would be to just have tcp_rcvbuf_grow()
adjust the clamp even if SOCK_RCVBUF_LOCK is set.
But IIUC this is what we were trying to get away from
in the first place.
Fixes: a2cbb16039 ("tcp: Update window clamping condition")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumaze@google.com>
Link: https://patch.msgid.link/20260408001438.129165-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use wildcard to match all EyeQ defconfigs under arch/mips. This covers
the newly added defconfig, and the EyeQ5 and EyeQ6H ones. Add an entry
for the dt-bindings header of the EyeQ6Lplus clocks.
While at it, add myself to the maintainers of Mobileye MIPS SoCs.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add a default configuration for Mobileye EyeQ6Lplus evaluation board.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the device tree of the evaluation board of the EyeQ6Lplus SoC.
The board comes with 2GB of RAM and an SPI NAND connected to the octoSPI
controller The UART of the SoC is used as the serial console.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the device tree include files for the EyeQ6Lplus system on chip
from Mobileye.
Those files provide the initial support of the SoC:
* The I6500 CPU and GIC interrupt controller.
* The OLB ("Other Logic Block") providing clocks, resets and pin controls.
* One UART.
* One GPIO controller.
* Two SPI controllers, one in host mode and one in target mode.
* One octoSPI flash controller.
* Two I2C controllers.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Declare the PLLs and fixed factors found in the EyeQ6Lplus OLB as part
of the match data for the "mobileye,eyeq6lplus-olb" compatible.
The PLL and fixed factor of the CPU are registered in early init as they
are required during the boot by the GIC timer.
Also select clk-eyeq for all EYEQ SoCs instead of listing each one
individually, as it is needed by all Mobileye EyeQ SoC.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The spread spectrum of the PLL found in eyeQ OLB is in 1/1024 parts of the
frequency, not in 1/1000, so adjust the computation of the accuracy. Also
correct the downspreading to match.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The output of the PLL is routed before the post-divisor so it should be
ignored when computing the frequency of the PLL, functional change is
implemented to reflect how the clock signal is wired internally.
For the PLL of the EyeQ5, EyeQ6L, and EyeQ6H, this change has no impact
as the post-divisor is either reported as disabled or set to 1. The PLL
frequency is the same before and after the post-divisor.
For the PLL in EyeQ6Lplus, however, the post-divisor is not 1, so it must
be ignored to compute the correct frequency.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the match data for the pinctrl found in the EyeQ6Lplus OLB. The pin
control is identical in function to the one present in the EyeQ5 but
has a single bank of 32 pins.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Instead of using the pin descriptions, pin functions and register offsets
of the EyeQ5 directly, access those via a pointer to a newly introduced
struct eq5p_match_data.
This structure contains, in addition to the pin descriptions and pin
functions, an array of pin banks. Each bank holds the number of pins
and the register offsets.
All functions accessing a pin now use a pointer to a bank structure and
an offset inside that bank. The conversion from a pin number to a bank
and an offset is done in the new function eq5p_pin_to_bank_offset(),
which replace eq5p_pin_to_bank() and eq5p_pin_to_offset().
All the data related to the EyeQ5 is declared with the eq5p_eyeq5_
prefix to distinguish it from the common code.
During the probe, we use the parent OF node to get the match data.
We cannot directly use an OF node since pinctrl-eyeq5 is an auxiliary
device of clk-eyeq.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Declare the two reset domains found in the EyeQ6Lplus OLB and add
them to the data matched by 'mobileye,eyeq6lplus-olb' compatible.
Those reset domains are identical to those present in the EyeQ5
OLB, so no changes are needed to support them.
Also select reset-eyeq for all EYEQ SoCs instead of listing each one
individually, as it is needed by all Mobileye EyeQ SoC.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the EyeQ6Lplus to the group of choices for Mobileye SoC
and set the kernel load address specific to this SoC.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The "Other Logic Block" found in the EyeQ6Lplus from Mobileye provides
various functions for the controllers present in the SoC.
The OLB produces 22 clocks derived from its input, which is connected
to the main oscillator of the SoC.
It provides reset signals via two reset domains.
It also controls 32 pins to be either a GPIO or an alternate function.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add an entry to the mobileye bindings for the EyeQ6Lplus
which is part of the EyeQ family of system-on-chip.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When a Bluetooth controller encounters a coredump, it triggers the
Subsystem Restart (SSR) mechanism. The controller first reports the
coredump data and, once the upload is complete, sends a hw_error
event. The host relies on this event to proceed with subsequent
recovery actions.
If the host has not finished processing the coredump data when the
hw_error event is received, it waits until either the processing is
complete or the 8-second timeout expires before handling the event.
The current implementation clears QCA_MEMDUMP_COLLECTION using
clear_bit(), which does not wake up waiters sleeping in
wait_on_bit_timeout(). As a result, the waiting thread may remain
blocked until the timeout expires even if the coredump collection
has already completed.
Fix this by clearing QCA_MEMDUMP_COLLECTION with
clear_and_wake_up_bit(), which also wakes up the waiting thread and
allows the hw_error handling to proceed immediately.
Test case:
- Trigger a controller coredump using:
hcitool cmd 0x3f 0c 26
- Tested on QCA6390.
- Capture HCI logs using btmon.
- Verify that the delay between receiving the hw_error event and
initiating the power-off sequence is reduced compared to the
timeout-based behavior.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use strscpy() instead of snprintf() to copy plain strings with no format
specifiers.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn lookup and field access must be covered by hdev lock in
hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise
the connection can be freed concurrently.
Extend the hci_dev_lock critical section to cover all conn usage in both
handlers.
Keep the existing keypress notification behavior unchanged by routing
the early exits through a common unlock path.
Fixes: 92a25256f1 ("Bluetooth: mgmt: Implement support for passkey notification")
Cc: stable@vger.kernel.org
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
struct hci_std_codecs and struct hci_std_codecs_v2 are flexible
structures, this is structures that contain a flexible-array member
(__u8 codec[]; and struct hci_std_codec_v2 codec[];, correspondingly.)
Since struct hci_rp_read_local_supported_codecs and struct
hci_rp_read_local_supported_codecs_v2 are defined by hardware, we
create the new struct hci_std_codecs_hdr and struct hci_std_codecs_v2_hdr
types, and use them to replace the object types causing trouble in
struct hci_rp_read_local_supported_codecs and struct
hci_rp_read_local_supported_codecs_v2, namely struct hci_std_codecs
std_codecs; and struct hci_std_codecs_v2_hdr std_codecs;.
Also, once -fms-extensions is enabled, we can use transparent struct
members in both struct hci_std_codecs and struct hci_std_codecs_v2_hdr.
Notice that the newly created types does not contain the flex-array
member `codec`, which is the object causing the -Wfamnae warnings.
After these changes, the size of struct hci_rp_read_local_supported_codecs
and struct hci_rp_read_local_supported_codecs_v2, along with their
member's offsets remain the same, hence the memory layouts don't
change:
Before changes:
struct hci_rp_read_local_supported_codecs {
__u8 status; /* 0 1 */
struct hci_std_codecs std_codecs; /* 1 1 */
struct hci_vnd_codecs vnd_codecs; /* 2 1 */
/* size: 3, cachelines: 1, members: 3 */
/* last cacheline: 3 bytes */
} __attribute__((__packed__));
struct hci_rp_read_local_supported_codecs_v2 {
__u8 status; /* 0 1 */
struct hci_std_codecs_v2 std_codecs; /* 1 1 */
struct hci_vnd_codecs_v2 vendor_codecs; /* 2 1 */
/* size: 3, cachelines: 1, members: 3 */
/* last cacheline: 3 bytes */
} __attribute__((__packed__));
After changes:
struct hci_rp_read_local_supported_codecs {
__u8 status; /* 0 1 */
struct hci_std_codecs_hdr std_codecs; /* 1 1 */
struct hci_vnd_codecs vnd_codecs; /* 2 1 */
/* size: 3, cachelines: 1, members: 3 */
/* last cacheline: 3 bytes */
} __attribute__((__packed__));
struct hci_rp_read_local_supported_codecs_v2 {
__u8 status; /* 0 1 */
struct hci_std_codecs_v2_hdr std_codecs; /* 1 1 */
struct hci_vnd_codecs_v2 vendor_codecs; /* 2 1 */
/* size: 3, cachelines: 1, members: 3 */
/* last cacheline: 3 bytes */
} __attribute__((__packed__));
With these changes fix the following warnings:
include/net/bluetooth/hci.h:1490:31: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
include/net/bluetooth/hci.h:1525:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
copy_struct_from_sockptr() fill 'buffer' in
sco_sock_setsockopt() with zeros, so there's no
real problem.
But it actually looks strange to do this,
without checking all of codecs->codecs[0]
really comes from userspace:
sco_pi(sk)->codec = codecs->codecs[0];
As only optlen < sizeof(struct bt_codecs) is checked
and codecs->num_codecs is not checked against != 1,
but only <= 1, and the space for the additional struct bt_codec
is not checked.
Note I don't understand bluetooth and I didn't do any runtime
tests with this! I just found it when debugging a problem
in copy_struct_from_sockptr().
I just added this to check the size is as expected:
BUILD_BUG_ON(struct_size(codecs, codecs, 0) != 1);
BUILD_BUG_ON(struct_size(codecs, codecs, 1) != 8);
And made sure it still compiles using this:
make CF=-D__CHECK_ENDIAN__ W=1ce C=1 net/bluetooth/sco.o
Fixes: 3e643e4efa ("Bluetooth: Improve setsockopt() handling of malformed user input")
Cc: Michal Luczaj <mhal@rbox.co>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: David Wei <dw@davidwei.uk>
Cc: linux-bluetooth@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Align each descriptor/index/context region to 128 bytes before
calculating the total DMA pool size. This ensures the memory layout
shared with firmware meets the 128-byte alignment requirement.
The DMA pool alignment is also set to 128 bytes to match the firmware
expectation for all shared structures.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding
l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file
acquires the lock first. A remote BLE device can send a crafted
L2CAP ECRED reconfiguration response to corrupt the channel list
while another thread is iterating it.
Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(),
and l2cap_chan_unlock() and l2cap_chan_put() after, matching the
pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del().
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
TI WL183x controllers advertise support for the HCI Enhanced Setup
Synchronous Connection command, but SCO setup fails when the enhanced
path is used. The only working configuration is to fall back to the
legacy HCI Setup Synchronous Connection (0x0028).
This matches the scenario described in commit 05abad8572
("Bluetooth: HCI: Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk").
Enable HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN automatically for
devices compatible with:
- ti,wl1831-st
- ti,wl1835-st
- ti,wl1837-st
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add VID 0489 & PID e11d for MediaTek MT7922 USB Bluetooth chip.
Found in Dynabook GA/ZY (W6GAZY5RCL).
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=03 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e11d Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Kamiyama Chiaki <nercone@nercone.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When USB support is disabled, the array is not referenced anywhere,
causing a warning:
drivers/bluetooth/btmtk.c:35:3: error: 'btmtk_mt6639_devs' defined but not used [-Werror=unused-const-variable=]
35 | } btmtk_mt6639_devs[] = {
| ^~~~~~~~~~~~~~~~~
Move it into the #ifdef block.
Fixes: 28b7c5a6db ("Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some MT6639 Bluetooth USB interfaces (e.g. IMC Networks 13d3:3588 on
ASUS ROG STRIX X870E-E and ProArt X870E-Creator boards) expose only a
single alternate setting (alt 0) on the ISO interface. The driver
unconditionally requests alt setting 1, which fails with EINVAL on
these devices, causing a ~20 second initialization delay and no LE
audio support.
Check the number of available alternate settings before selecting one.
If only alt 0 exists, use it; otherwise request alt 1 as before.
Closes: https://github.com/jetm/mediatek-mt7927-dkms/pull/39
Signed-off-by: Javier Tia <floss@jetm.me>
Reported-by: Ryan Gilbert <xelnaga@gmail.com>
Tested-by: Ryan Gilbert <xelnaga@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The MediaTek MT7927 (Filogic 380) combo WiFi 7 + BT 5.4 module uses
hardware variant 0x6639 for its Bluetooth subsystem. Without this patch,
the chip fails with "Unsupported hardware variant (00006639)" or hangs
during firmware download.
Three changes are needed to support MT6639:
1. CHIPID workaround: On some boards the BT USB MMIO register reads
0x0000 for dev_id, causing the driver to skip the 0x6639 init path.
Force dev_id to 0x6639 only when the USB VID/PID matches a known
MT6639 device, avoiding misdetection if a future chip also reads
zero. This follows the WiFi-side pattern that uses PCI device IDs
to scope the same workaround.
2. Firmware naming: MT6639 uses firmware version prefix "2_1" instead of
"1_1" used by MT7925 and other variants. The firmware path is
mediatek/mt7927/BT_RAM_CODE_MT6639_2_1_hdr.bin, using the mt7927
directory to match the WiFi firmware convention. The filename will
likely change to use MT7927 once MediaTek submits a dedicated
Linux firmware binary.
3. Section filtering: The MT6639 firmware binary contains 9 sections, but
only sections with (dlmodecrctype & 0xff) == 0x01 are Bluetooth-related.
Sending the remaining WiFi/other sections causes an irreversible BT
subsystem hang requiring a full power cycle. This matches the Windows
driver behavior observed via USB captures.
Also add 0x6639 to the reset register (CONNV3) and firmware setup switch
cases alongside the existing 0x7925 handling.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221096
Link: https://github.com/openwrt/mt76/issues/927
Reported-by: Ryan Gilbert <xelnaga@gmail.com>
Signed-off-by: Javier Tia <floss@jetm.me>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.
Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.
Fix by holding the lock.
Fixes: 70c4642563 ("Bluetooth: Refactor connection request handling")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use the common USB helper for looking up bulk and interrupt endpoints
instead of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use the common USB helper for looking up bulk and interrupt endpoints
instead of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When hci_register_dev() fails in hci_uart_register_dev()
HCI_UART_PROTO_INIT is not cleared before calling hu->proto->close(hu)
and setting hu->hdev to NULL. This means incoming UART data will reach
the protocol-specific recv handler in hci_uart_tty_receive() after
resources are freed.
Clear HCI_UART_PROTO_INIT with a write lock before calling
hu->proto->close() and setting hu->hdev to NULL. The write lock ensures
all active readers have completed and no new reader can enter the
protocol recv path before resources are freed.
This allows the protocol-specific recv functions to remove the
"HCI_UART_REGISTERED" guard without risking a null pointer dereference
if hci_register_dev() fails.
Fixes: 5df5dafc17 ("Bluetooth: hci_uart: Fix another race during initialization")
Signed-off-by: Jonathan Rissanen <jonathan.rissanen@axis.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_run_once() needs to indicate whether a queue item was
added, so caller can know if callbacks are called, so it can avoid
leaking resources.
Change the function to return -EEXIST if queue item already exists.
Modify all callsites vs. the changes. The only callsite is
hci_abort_conn().
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On platforms using an M.2 slot with both UART and USB support, bt_en is
pulled high by hardware. In this case, software-based power control
should be disabled. The current platforms are Lemans-EVK and Monaco-EVK.
Add QCA_WCN7850 to the existing condition so that power_ctrl_enabled is
cleared when bt_en is not software-controlled (or absent), aligning its
behavior with WCN6750 and WCN6855
Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Replace single space with tab and insert blank line after declaration, according to checkpatch
Signed-off-by: Lukas Kraft <rebootrequired42@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Marc Harvey says:
====================
Decouple receive and transmit enablement in team driver
Allow independent control over receive and transmit enablement states
for aggregated ports in the team driver.
The motivation is that IEE 802.3ad LACP "independent control" can't
be implemented for the team driver currently. This was added to the
bonding driver in commit 240fd40552 ("bonding: Add independent
control state machine").
This series also has a few patches that add tests to show that the old
coupled enablement still works and that the new decoupled enablement
works as intended (4, 5, and 10).
There are three patches with small fixes as well, with the goal of
making the final decoupling patch clearer (1, 2, and 3).
Signed-off-by: Marc Harvey <marcharvey@google.com>
====================
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-0-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use ping and tcpdump to verify that independent rx and tx enablement
of team driver member interfaces works as intended.
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-10-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This option allows independent control over tx enablement without
affecting rx enablement. Like the rx_enabled option, this also
implicitly affects the enabled option.
If this option is not used, then the enabled option will continue to
behave as it did before.
Tested in a follow-up patch with a new selftest.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-9-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow independent control over rx enablement via the rx_enabled option
without affecting tx enablement. This affects the normal enabled
option since a port is only considered enabled if both tx and rx are
enabled.
If this option is not used, then the enabled option will continue to
behave exactly as it did before.
Tested in a follow-up patch with a new selftest.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-8-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Separate the rx and tx enablement/disablement into different
functions so that it is easier to interact with them independently
later.
Although this patch changes receive and transmit paths, the actual
behavior of the teaming driver should remain unchanged, since there
is no option introduced yet to change rx or tx enablement
independently. Those options will be added in follow-up patches.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-7-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add no functional changes, but rename enablement functions, variables
etc. that are used in teaming driver transmit decisions.
Since rx and tx enablement are still coupled, some of the variables
renamed in this patch are still used for the rx path, but that will
change in a follow-up patch.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-6-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are no tests that verify enablement and disablement of team driver
ports with teamd. This should work even with changes to the enablement
option, so it is important to test.
This test sets up an active-backup network configuration across two
network namespaces, and tries to send traffic while changing which
link is the active one.
Also increase the team test timeout to 300 seconds, because gracefully
killing teamd can take 30 seconds for each instance.
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-5-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
