nfs4_clone_server() builds a child nfs_server for same-server
automounted submounts but never calls nfs4_session_limit_rwsize()
or nfs4_session_limit_xasize() after nfs_clone_server(). This means
the child mount can end up with rsize/wsize values that exceed the
negotiated session channel limits, causing NFS4ERR_REQ_TOO_BIG and
EIO on servers that enforce tight max_request_size budgets.
Top-level mounts go through nfs4_server_common_setup() which calls
these limiters after nfs_probe_server(). Apply the same clamping on
the clone path for consistency.
Fixes: 2b092175f5 ("NFS: Fix inheritance of the block sizes when automounting")
Cc: stable@vger.kernel.org
Signed-off-by: Tushar Sariya <tushar.97@hotmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Currently, getting a directory delegation is opportinistic and gets
added to an existing GETATTR that's trying to retrieve some needed
attributes. However, GET_DIRDELEGATION can fail and that currently
causes a GETATTR to fail and an error is propagated to the user.
Instead, the original GETATTR should be retried without requesting
a directory delegation. Also, now chosing to clear asking for
the direct delegation for this specific inode.
Fixes: 156b094829 ("NFS: Request a directory delegation on ACCESS, CREATE, and UNLINK")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Since commit 6f9bda2337 ("NFS: Fix directory delegation
verifier checks") xfstest generic/309 is failing because after
the rename (mv) operation, client's mtime/ctime is the same.
Update the delegated mtime when directory delegations are
present in rename.
Fixes: 6f9bda2337 ("NFS: Fix directory delegation verifier checks")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
As noted in the blamed commit, the AR8035 and other PHYs from this
family advertise the Extended Next Page support by default, which may be
understood by some partners as this PHY being multi-gig capable.
The fix is to disable XNP advertising, which is done by setting bit 12
of the Auto-Negotiation Advertisement Register (MII_ADVERTISE).
The blamed commit incorrectly uses MDIO_AN_CTRL1_XNP, which is bit 13 as per
802.3 : 45.2.7.1 AN control register (Register 7.0)
BIT 12 in MII_ADVERTISE is wrapped by ADVERTISE_RESV, used by some
drivers such as the aquantia one. 802.3 Clause 28 defines bit 12 as
Extended Next Page ability, at least in recent versions of the standard.
Let's add a define for it and use it in the at803x driver.
Fixes: 3c51fa5d2a ("net: phy: ar803x: disable extended next page bit")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260410171021.1277138-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable receive process stopped and receive buffer unavailable
interrupts, so that the statistic counters can be updated.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1wBBaR-0000000GZHR-1dbM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core:
- hci_core: Rate limit the logging of invalid ISO handle
- hci_sync: make hci_cmd_sync_run_once return -EEXIST if exists
- hci_event: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
- hci_event: fix potential UAF in SSP passkey handlers
- HCI: Avoid a couple -Wflex-array-member-not-at-end warnings
- L2CAP: CoC: Disconnect if received packet size exceeds MPS
- L2CAP: Add missing chan lock in l2cap_ecred_reconf_rsp
- L2CAP: Fix printing wrong information if SDU length exceeds MTU
- SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
drivers:
- btusb: MT7922: Add VID/PID 0489/e174
- btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
- btusb: Add MT7927 IDs ASUS ROG Crosshair X870E Hero, Lenovo Legion Pro 7
16ARX9, Gigabyte Z790 AORUS MASTER X, MSI X870E Ace Max, TP-Link
Archer TBE550E, ASUS X870E / ProArt X870E-Creator.
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: MediaTek MT7922: Add VID 0489 & PID e11d
- btintel: Add support for Scorpious Peak2 support
- btintel: Add support for Scorpious Peak2F support
- btintel_pcie: Add device id of Scorpius Peak2, Nova Lake-PCD-H
- btintel_pcie: Add device id of Scorpious2, Nova Lake-PCD-S
- btmtk: Add reset mechanism if downloading firmware failed
- btmtk: Add MT6639 (MT7927) Bluetooth support
- btmtk: fix ISO interface setup for single alt setting
- btmtk: add MT7902 SDIO support
- Bluetooth: btmtk: add MT7902 MCU support
- btbcm: Add entry for BCM4343A2 UART Bluetooth
- qca: enable pwrseq support for wcn39xx devices
- hci_qca: Fix BT not getting powered-off on rmmod
- hci_qca: disable power control for WCN7850 when bt_en is not defined
- hci_qca: Fix missing wakeup during SSR memdump handling
- hci_ldisc: Clear HCI_UART_PROTO_INIT on error
- mmc: sdio: add MediaTek MT7902 SDIO device ID
- hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
-----BEGIN PGP SIGNATURE-----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=jFF1
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_core: Rate limit the logging of invalid ISO handle
- hci_sync: make hci_cmd_sync_run_once return -EEXIST if exists
- hci_event: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
- hci_event: fix potential UAF in SSP passkey handlers
- HCI: Avoid a couple -Wflex-array-member-not-at-end warnings
- L2CAP: CoC: Disconnect if received packet size exceeds MPS
- L2CAP: Add missing chan lock in l2cap_ecred_reconf_rsp
- L2CAP: Fix printing wrong information if SDU length exceeds MTU
- SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
drivers:
- btusb: MT7922: Add VID/PID 0489/e174
- btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
- btusb: Add MT7927 IDs ASUS ROG Crosshair X870E Hero, Lenovo Legion Pro 7
16ARX9, Gigabyte Z790 AORUS MASTER X, MSI X870E Ace Max, TP-Link
Archer TBE550E, ASUS X870E / ProArt X870E-Creator.
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: MediaTek MT7922: Add VID 0489 & PID e11d
- btintel: Add support for Scorpious Peak2 support
- btintel: Add support for Scorpious Peak2F support
- btintel_pcie: Add device id of Scorpius Peak2, Nova Lake-PCD-H
- btintel_pcie: Add device id of Scorpious2, Nova Lake-PCD-S
- btmtk: Add reset mechanism if downloading firmware failed
- btmtk: Add MT6639 (MT7927) Bluetooth support
- btmtk: fix ISO interface setup for single alt setting
- btmtk: add MT7902 SDIO support
- Bluetooth: btmtk: add MT7902 MCU support
- btbcm: Add entry for BCM4343A2 UART Bluetooth
- qca: enable pwrseq support for wcn39xx devices
- hci_qca: Fix BT not getting powered-off on rmmod
- hci_qca: disable power control for WCN7850 when bt_en is not defined
- hci_qca: Fix missing wakeup during SSR memdump handling
- hci_ldisc: Clear HCI_UART_PROTO_INIT on error
- mmc: sdio: add MediaTek MT7902 SDIO device ID
- hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
* tag 'for-net-next-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (59 commits)
Bluetooth: hci_qca: Fix missing wakeup during SSR memdump handling
Bluetooth: btintel_pcie: use strscpy to copy plain strings
Bluetooth: hci_event: fix potential UAF in SSP passkey handlers
Bluetooth: hci.h: Avoid a couple -Wflex-array-member-not-at-end warnings
Bluetooth: SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
Bluetooth: btintel_pcie: Align shared DMA memory to 128 bytes
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
Bluetooth: hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
Bluetooth: btusb: MediaTek MT7922: Add VID 0489 & PID e11d
Bluetooth: btmtk: hide unused btmtk_mt6639_devs[] array
Bluetooth: btusb: Add MT7927 ID for ASUS X870E / ProArt X870E-Creator
Bluetooth: btusb: Add MT7927 ID for TP-Link Archer TBE550E
Bluetooth: btusb: Add MT7927 ID for MSI X870E Ace Max
Bluetooth: btusb: Add MT7927 ID for Gigabyte Z790 AORUS MASTER X
Bluetooth: btusb: Add MT7927 ID for Lenovo Legion Pro 7 16ARX9
Bluetooth: btusb: Add MT7927 ID for ASUS ROG Crosshair X870E Hero
Bluetooth: btmtk: fix ISO interface setup for single alt setting
Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
Bluetooth: btmtk: refactor endpoint lookup
...
====================
Link: https://patch.msgid.link/20260413132247.320961-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Please consider pulling these changes from the signed vfs-7.1-rc1.misc tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCwAKCRCRxhvAZXjc
ohhBAQCAmQMlMRAXAgUZFYMTZpeQlcujP5rv+/vT2Tf/xS76YwD/dRDaw1FH294+
qtk/Z1NjleNixzE2sld1K9J32NxeyAc=
=+g9q
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- coredump: add tracepoint for coredump events
- fs: hide file and bfile caches behind runtime const machinery
Fixes:
- fix architecture-specific compat_ftruncate64 implementations
- dcache: Limit the minimal number of bucket to two
- fs/omfs: reject s_sys_blocksize smaller than OMFS_DIR_START
- fs/mbcache: cancel shrink work before destroying the cache
- dcache: permit dynamic_dname()s up to NAME_MAX
Cleanups:
- remove or unexport unused fs_context infrastructure
- trivial ->setattr cleanups
- selftests/filesystems: Assume that TIOCGPTPEER is defined
- writeback: fix kernel-doc function name mismatch for wb_put_many()
- autofs: replace manual symlink buffer allocation in autofs_dir_symlink
- init/initramfs.c: trivial fix: FSM -> Finite-state machine
- fs: remove stale and duplicate forward declarations
- readdir: Introduce dirent_size()
- fs: Replace user_access_{begin/end} by scoped user access
- kernel: acct: fix duplicate word in comment
- fs: write a better comment in step_into() concerning .mnt assignment
- fs: attr: fix comment formatting and spelling issues"
* tag 'vfs-7.1-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits)
dcache: permit dynamic_dname()s up to NAME_MAX
fs: attr: fix comment formatting and spelling issues
fs: hide file and bfile caches behind runtime const machinery
fs: write a better comment in step_into() concerning .mnt assignment
proc: rename proc_notify_change to proc_setattr
proc: rename proc_setattr to proc_nochmod_setattr
affs: rename affs_notify_change to affs_setattr
adfs: rename adfs_notify_change to adfs_setattr
hfs: update comments on hfs_inode_setattr
kernel: acct: fix duplicate word in comment
fs: Replace user_access_{begin/end} by scoped user access
readdir: Introduce dirent_size()
coredump: add tracepoint for coredump events
fs: remove do_sys_truncate
fs: pass on FTRUNCATE_* flags to do_truncate
fs: fix archiecture-specific compat_ftruncate64
fs: remove stale and duplicate forward declarations
init/initramfs.c: trivial fix: FSM -> Finite-state machine
autofs: replace manual symlink buffer allocation in autofs_dir_symlink
fs/mbcache: cancel shrink work before destroying the cache
...
nfs4_ff_alloc_deviceid_node() reads version_count from XDR without
checking it is non-zero. When a malicious NFS server sends a pNFS
LAYOUTGET response with version_count=0, kcalloc(0, ...) returns
ZERO_SIZE_PTR (0x10). The subsequent ds_versions[0] access in
nfs4_ff_layout_ds_version() and other callers dereferences this
invalid pointer, causing an out-of-bounds read.
Add a check for version_count == 0 after parsing it from XDR, before
the allocation.
The OOB read was confirmed with KASAN: null-ptr-deref in range
[0x0000000000000010-0x0000000000000017] from accessing ZERO_SIZE_PTR.
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Reported-by: Klaudia Kloc <klaudia@vidocsecurity.com>
Reported-by: Dawid Moczadło <dawid@vidocsecurity.com>
Tested-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We already print device uses for block layouts, do the same for SCSI
layouts as that greatly helps understanding the operation of the client.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
mlx4_master_process_vhcr() logs vhcr->errno on failures, but this field
is never populated by the PF path. As a result, all failures are reported
with errno 0 and err print in status case which is misleading.
Use the actual return value (err) instead, translate it to FW status
before logging, and report both values.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260409092754.508880-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Please consider pulling these changes from the signed vfs-7.1-rc1.pidfs tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCwAKCRCRxhvAZXjc
omfuAQDckt5g7vxBr9hKdyrq1//nsu44fst/mRqr2iSYjuKfPQD/VN6Lw9e56Y/q
l4hHxsPPrSSxbijwng7im36iPIGdfwI=
=BbFh
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull clone and pidfs updates from Christian Brauner:
"Add three new clone3() flags for pidfd-based process lifecycle
management.
CLONE_AUTOREAP:
CLONE_AUTOREAP makes a child process auto-reap on exit without ever
becoming a zombie. This is a per-process property in contrast to
the existing auto-reap mechanism via SA_NOCLDWAIT or SIG_IGN for
SIGCHLD which applies to all children of a given parent.
Currently the only way to automatically reap children is to set
SA_NOCLDWAIT or SIG_IGN on SIGCHLD. This is a parent-scoped
property affecting all children which makes it unsuitable for
libraries or applications that need selective auto-reaping of
specific children while still being able to wait() on others.
CLONE_AUTOREAP stores an autoreap flag in the child's
signal_struct. When the child exits do_notify_parent() checks this
flag and causes exit_notify() to transition the task directly to
EXIT_DEAD. Since the flag lives on the child it survives
reparenting: if the original parent exits and the child is
reparented to a subreaper or init the child still auto-reaps when
it eventually exits. This is cleaner than forcing the subreaper to
get SIGCHLD and then reaping it. If the parent doesn't care the
subreaper won't care. If there's a subreaper that would care it
would be easy enough to add a prctl() that either just turns back
on SIGCHLD and turns off auto-reaping or a prctl() that just
notifies the subreaper whenever a child is reparented to it.
CLONE_AUTOREAP can be combined with CLONE_PIDFD to allow the parent
to monitor the child's exit via poll() and retrieve exit status via
PIDFD_GET_INFO. Without CLONE_PIDFD it provides a fire-and-forget
pattern. No exit signal is delivered so exit_signal must be zero.
CLONE_THREAD and CLONE_PARENT are rejected: CLONE_THREAD because
autoreap is a process-level property, and CLONE_PARENT because an
autoreap child reparented via CLONE_PARENT could become an
invisible zombie under a parent that never calls wait().
The flag is not inherited by the autoreap process's own children.
Each child that should be autoreaped must be explicitly created
with CLONE_AUTOREAP.
CLONE_NNP:
CLONE_NNP sets no_new_privs on the child at clone time. Unlike
prctl(PR_SET_NO_NEW_PRIVS) which a process sets on itself,
CLONE_NNP allows the parent to impose no_new_privs on the child at
creation without affecting the parent's own privileges.
CLONE_THREAD is rejected because threads share credentials.
CLONE_NNP is useful on its own for any spawn-and-sandbox pattern
but was specifically introduced to enable unprivileged usage of
CLONE_PIDFD_AUTOKILL.
CLONE_PIDFD_AUTOKILL:
This flag ties a child's lifetime to the pidfd returned from
clone3(). When the last reference to the struct file created by
clone3() is closed the kernel sends SIGKILL to the child. A pidfd
obtained via pidfd_open() for the same process does not keep the
child alive and does not trigger autokill - only the specific
struct file from clone3() has this property. This is useful for
container runtimes, service managers, and sandboxed subprocess
execution - any scenario where the child must die if the parent
crashes or abandons the pidfd or just wants a throwaway helper
process.
CLONE_PIDFD_AUTOKILL requires both CLONE_PIDFD and CLONE_AUTOREAP.
It requires CLONE_PIDFD because the whole point is tying the
child's lifetime to the pidfd. It requires CLONE_AUTOREAP because a
killed child with no one to reap it would become a zombie - the
primary use case is the parent crashing or abandoning the pidfd so
no one is around to call waitpid(). CLONE_THREAD is rejected
because autokill targets a process not a thread.
If CLONE_NNP is specified together with CLONE_PIDFD_AUTOKILL an
unprivileged user may spawn a process that is autokilled. The child
cannot escalate privileges via setuid/setgid exec after being
spawned. If CLONE_PIDFD_AUTOKILL is specified without CLONE_NNP the
caller must have have CAP_SYS_ADMIN in its user namespace"
* tag 'vfs-7.1-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: check pidfd_info->coredump_code correctness
pidfds: add coredump_code field to pidfd_info
kselftest/coredump: reintroduce null pointer dereference
selftests/pidfd: add CLONE_PIDFD_AUTOKILL tests
selftests/pidfd: add CLONE_NNP tests
selftests/pidfd: add CLONE_AUTOREAP tests
pidfd: add CLONE_PIDFD_AUTOKILL
clone: add CLONE_NNP
clone: add CLONE_AUTOREAP
Please consider pulling these changes from the signed namespaces-7.1-rc1.misc tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCwAKCRCRxhvAZXjc
ols1AP9rA4gjJOTwHg0/pc+GL4qLSqUP3O4KeuJ8qccBcEUITAD/frpUjR11Ibw/
F78/x1QhDPI8PCcw7kEyAPTfDb9VsgU=
=5HBm
-----END PGP SIGNATURE-----
Merge tag 'namespaces-7.1-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace update from Christian Brauner:
"Add two simple helper macros for the namespace infrastructure"
* tag 'namespaces-7.1-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nsproxy: Add FOR_EACH_NS_TYPE() X-macro and CLONE_NS_ALL
Firmware-supplied flat DT properties are raw byte sequences. Several
early FDT helpers fetch properties such as status, model, compatible,
and device_type and then use them as C strings with strcmp(), strlen(),
or pr_info() without first proving that the property is NUL-terminated
within its declared length.
Use fdt_stringlist_get() for these string properties instead. That
preserves the existing behavior for valid DTBs while rejecting malformed
unterminated properties before they are passed to C string helpers.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260403164501.1-drivers-of-fdt-v2-pengpeng@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
early_init_dt_scan_chosen_stdout() fetches stdout-path and
linux,stdout-path directly from the flat DT and immediately passes the
result to strchrnul(). Flat DT properties are raw firmware-supplied
byte sequences, and this path does not prove that either property is
NUL-terminated within its declared bounds.
Use fdt_stringlist_get() so malformed unterminated stdout-path
properties are rejected before the local parser walks them as C
strings.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260403143001.1-dt-fdt-stdout-pengpeng@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
On Qualcomm Hawi platform, IMEM is a block of SRAM shared across
multiple IP blocks which can fall back to "mmio-sram". Document
its compatible.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://patch.msgid.link/20260401125528.594108-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Commit e2c318225a ("kbuild: deb-pkg: add
pkg.linux-upstream.nokernelheaders build profile") changed how
install-extmod-build gets called, making it always rebuild the host
programs below scripts/ if HOSTCC wasn't specified with its full triplet
on the make command line. That is, apparently, needed to fix up commit
f1d87664b8 ("kbuild: cross-compile linux-headers package when
possible") for cross-compiles. However, in the much more common case of
non-cross-compile builds this will lead to unnecessary rebuilding of
host tools including gcc plugins. This, in turn, will lead to a full
kernel rebuild on the next 'make bindeb-pkg' which is unfortunate.
Avoid that by only triggering the rebuild of host tools for actual
cross-compile builds.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Fixes: e2c318225a ("kbuild: deb-pkg: add pkg.linux-upstream.nokernelheaders build profile")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260402145116.1010901-1-minipli@grsecurity.net
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Please consider pulling these changes from the signed vfs-7.1-rc1.bh.metadata tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCwAKCRCRxhvAZXjc
os67AQCd65HW/XVVw01846OH5Cqw7vFYBa7HipkQPebX3NjCPgEAm4w8ywqKUe5o
rRLkZVIDBgkMGhH7Af+y2Ru5WZZiLwc=
=G3WM
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.bh.metadata' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs buffer_head updates from Christian Brauner:
"This cleans up the mess that has accumulated over the years in
metadata buffer_head tracking for inodes.
It moves the tracking into dedicated structure in filesystem-private
part of the inode (so that we don't use private_list, private_data,
and private_lock in struct address_space), and also moves couple other
users of private_data and private_list so these are removed from
struct address_space saving 3 longs in struct inode for 99% of inodes"
* tag 'vfs-7.1-rc1.bh.metadata' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
fs: Drop i_private_list from address_space
fs: Drop mapping_metadata_bhs from address space
ext4: Track metadata bhs in fs-private inode part
minix: Track metadata bhs in fs-private inode part
udf: Track metadata bhs in fs-private inode part
fat: Track metadata bhs in fs-private inode part
bfs: Track metadata bhs in fs-private inode part
affs: Track metadata bhs in fs-private inode part
ext2: Track metadata bhs in fs-private inode part
fs: Provide functions for handling mapping_metadata_bhs directly
fs: Switch inode_has_buffers() to take mapping_metadata_bhs
fs: Make bhs point to mapping_metadata_bhs
fs: Move metadata bhs tracking to a separate struct
fs: Fold fsync_buffers_list() into sync_mapping_buffers()
fs: Drop osync_buffers_list()
kvm: Use private inode list instead of i_private_list
fs: Remove i_private_data
aio: Stop using i_private_data and i_private_lock
hugetlbfs: Stop using i_private_data
fs: Stop using i_private_data for metadata bh tracking
...
Please consider pulling these changes from the signed vfs-7.1-rc1.fat tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCwAKCRCRxhvAZXjc
ooWuAP4kVC0Tg/Z8EBP/vwU6vekdZKQ+zfJuM1LOKHVuFTiwhQD+I5FfdakZRzKM
6DB/k4qDX2XmzURZTjWXBv6N+dClYA8=
=oP24
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.fat' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull FAT updates from Christian Brauner:
"Minor fixes for the fat filesystem"
* tag 'vfs-7.1-rc1.fat' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fat: fix stack frame size warnings in KUnit tests
fat: add KUnit tests for timestamp conversion helpers
Please consider pulling these changes from the signed vfs-7.1-rc1.kino tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCgAKCRCRxhvAZXjc
otmnAP4sbsxZQdz2TG2hJuOwnEZOkkxZQOUMc3ERVyZaWXIeTAEA7e5M+8FpoG9n
8ipO76UoaXdGLESrqVdp9EOhLqOW7QY=
=uMeJ
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs i_ino updates from Christian Brauner:
"For historical reasons, the inode->i_ino field is an unsigned long,
which means that it's 32 bits on 32 bit architectures. This has caused
a number of filesystems to implement hacks to hash a 64-bit identifier
into a 32-bit field, and deprives us of a universal identifier field
for an inode.
This changes the inode->i_ino field from an unsigned long to a u64.
This shouldn't make any material difference on 64-bit hosts, but
32-bit hosts will see struct inode grow by at least 4 bytes. This
could have effects on slabcache sizes and field alignment.
The bulk of the changes are to format strings and tracepoints, since
the kernel itself doesn't care that much about the i_ino field. The
first patch changes some vfs function arguments, so check that one out
carefully.
With this change, we may be able to shrink some inode structures. For
instance, struct nfs_inode has a fileid field that holds the 64-bit
inode number. With this set of changes, that field could be
eliminated. I'd rather leave that sort of cleanups for later just to
keep this simple"
* tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nilfs2: fix 64-bit division operations in nilfs_bmap_find_target_in_group()
EVM: add comment describing why ino field is still unsigned long
vfs: remove externs from fs.h on functions modified by i_ino widening
treewide: fix missed i_ino format specifier conversions
ext4: fix signed format specifier in ext4_load_inode trace event
treewide: change inode->i_ino from unsigned long to u64
nilfs2: widen trace event i_ino fields to u64
f2fs: widen trace event i_ino fields to u64
ext4: widen trace event i_ino fields to u64
zonefs: widen trace event i_ino fields to u64
hugetlbfs: widen trace event i_ino fields to u64
ext2: widen trace event i_ino fields to u64
cachefiles: widen trace event i_ino fields to u64
vfs: widen trace event i_ino fields to u64
net: change sock.sk_ino and sock_i_ino() to u64
audit: widen ino fields to u64
vfs: widen inode hash/lookup functions to u64
__fsdev_dax_direct_access() returns -EFAULT without setting *kaddr when
dax_pgoff_to_phys() returns -1 (pgoff out of range). The return value
was ignored, leaving kaddr uninitialized before being passed to
fsdev_write_dax().
Check the return value and propagate the error.
Thanks to Dan Carpenter and the smatch project for reporting this.
Signed-off-by: John Groves <john@groves.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/0100019d8262cda2-9714d31c-8fc1-4ca5-b32d-4df678240d14-000000@email.amazonses.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
rpcrdma_post_recvs() runs in CQ poll context and its cost
falls on the latency-critical path between polling a Receive
completion and waking the RPC consumer. Every cycle spent
refilling the Receive Queue delays delivery of the reply to
the NFS layer.
Move the rpcrdma_post_recvs() call in rpcrdma_reply_handler()
to after the RPC has been decoded and completed. The larger
batch size from the preceding patch provides sufficient
Receive Queue headroom to absorb the brief delay before
buffers are replenished.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The fixed RPCRDMA_MAX_RECV_BATCH of 7 results in frequent
small ib_post_recv batches during high-rate workloads. With
a 128-slot credit window, receives are reposted every 7th
completion, each batch incurring atomic serialization and a
doorbell write.
Replace the fixed batch constant with a per-endpoint value
scaled to 25% of the negotiated credit window. For a typical
128-credit connection this raises the batch from 7 to 32,
reducing doorbell frequency by roughly 4x and amortizing the
per-batch atomic and MMIO costs over a larger group of
receive WRs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The FRWR registration path converts data through three
representations: xdr_buf -> rpcrdma_mr_seg[] -> scatterlist[]
-> ib_map_mr_sg(). The rpcrdma_mr_seg intermediate is a relic
of when multiple registration strategies existed (FMR, physical,
FRWR). Only FRWR remains, so this indirection and the 6240-byte
rl_segments[260] array embedded in each rpcrdma_req serve no
purpose.
Introduce struct rpcrdma_xdr_cursor to track position within
an xdr_buf during iterative MR registration. Rewrite frwr_map to
populate scatterlist entries directly from the xdr_buf regions
(head kvec, page list, tail kvec). The boundary logic for
non-SG_GAPS devices is simpler because the xdr_buf structure
guarantees that page-region entries after the first start at
offset 0, and that head/tail kvecs are separate regions that
naturally break at MR boundaries.
Fix a pre-existing bug in rpcrdma_encode_write_list where the
write-pad statistics accumulator added mr->mr_length from the last
data MR rather than the write-pad MR. The refactored code uses
ep->re_write_pad_mr->mr_length.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
frwr_wp_create is the only caller of frwr_map outside the encode
path. It registers a single 4-byte write-pad region from a stack-
local rpcrdma_mr_seg. Inlining the registration logic directly
(sg_init_table + sg_set_page + ib_dma_map_sg + ib_map_mr_sg +
IOVA mangle + reg_wr setup) eliminates the coupling that would
otherwise complicate the removal of rpcrdma_mr_seg from frwr_map's
interface.
The inlined version adds a proper error-unwind ladder: on failure,
the DMA mapping (if established) is released, ep->re_write_pad_mr is
cleared, and the MR is returned to the transport free list. The old
frwr_map-based code relied on rpcrdma_mrs_destroy at teardown to
reclaim partially-initialized MRs.
This is a one-time setup path; duplicating ~20 lines is a reasonable
tradeoff for decoupling the write-pad registration from the data-
path MR registration.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
xprt_rdma_alloc_slot() and xprt_rdma_free_slot() lack serialization
between the buffer pool and the backlog queue. A buffer freed
after rpcrdma_buffer_get() finds the pool empty but before
rpc_sleep_on() places the task on the backlog is returned to the
pool with no waiter to wake, leaving the task stuck on the backlog
indefinitely.
After joining the backlog, re-check the pool and route any
recovered buffer through xprt_wake_up_backlog(), whose queue lock
serializes with concurrent wakeups and avoids double-assignment
of slots.
Because xprt_rdma_free_slot() does not hold reserve_lock, the
XPRT_CONGESTED double-check in xprt_throttle_congested() is
ineffective: a task can join the backlog through that path after
free_slot has already found it empty and cleared the bit. Avoid
this by using xprt_add_backlog_noncongested(), which queues the
task without setting XPRT_CONGESTED, so every allocation reaches
xprt_rdma_alloc_slot() and its post-sleep re-check.
Fixes: edb41e61a5 ("xprtrdma: Make rpc_rqst part of rpcrdma_req")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Commit a721035477 ("SUNRPC/xprt: async tasks mustn't block waiting
for memory") changed xprt_rdma_alloc_slot() to set tk_status to
-ENOMEM so that call_reserveresult() would sleep HZ/4 before
retrying. That rationale applies to xprt_dynamic_alloc_slot(),
where an immediate retry under memory pressure wastes CPU, but not
to the RDMA backlog path: a task woken from the backlog has a slot
waiting for it, so the 250 ms rpc_delay adds latency without
benefit.
This also aligns the code with the existing kernel-doc for
xprt_rdma_alloc_slot(), which already documented %-EAGAIN.
Fixes: a721035477 ("SUNRPC/xprt: async tasks mustn't block waiting for memory")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
rpcrdma_sendctx_get_locked() and rpcrdma_sendctx_put_locked() can
race in a way that leaves XPRT_WRITE_SPACE set permanently, blocking
all further sends on the transport:
get_locked put_locked (Send completion)
---------- --------------------------
read rb_sc_tail
-> ring full
advance rb_sc_tail
xprt_write_space():
test_bit(WRITE_SPACE)
-> not set, return
set_bit(WRITE_SPACE)
return NULL (-EAGAIN)
After the sender releases XPRT_LOCKED, the release path refuses to
wake the next task because XPRT_WRITE_SPACE is set. The sender
retries, finds XPRT_WRITE_SPACE still set, and sleeps on
xprt_sending. No further Send completions arrive to clear the flag
because no new Sends can be posted.
With nconnect, the stalled transport's share of congestion credits
are never returned, starving the remaining transports as well.
Fixes: 05eb06d866 ("xprtrdma: Fix occasional transport deadlock")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
xfstest generic/728 fails with delegated timestamps. The client does a
removexattr and then a stat to test the ctime, which doesn't change. The
stat() doesn't trigger a GETATTR because of the delegated timestamps, so
it relies on the cached ctime, which is wrong.
The setxattr compound has a trailing GETATTR, which ensures that its
ctime gets updated. Follow the same strategy with removexattr.
Fixes: 3e1f02123f ("NFSv4.2: add client side XDR handling for extended attributes")
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
xfstest generic/221 is failing with delegated timestamps enabled. When
the client holds a WRITE_ATTRS_DELEG delegation, and a userland process
does a utimensat() for only the atime, the ctime is not properly
updated. The problem is that the client tries to cache the atime update,
but there is no mtime update, so the delegated attribute update never
updates the ctime.
Delegated timestamps don't have a mechanism to update the ctime in
accordance with atime-only changes due to utimensat() and the like.
Change the client to issue an RPC in this case, so that the ctime gets
properly updated alongside the atime.
Fixes: 40f45ab381 ("NFS: Further fixes to attribute delegation a/mtime changes")
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When a pnfs error occurs, the IO is retried against the MDS. However,
the initial IO leads to the kernel logging "Serer wrote zero bytes"
when in fact the MDS IO will not fail and thus the error misleads
administrators that the system is experiencing issues.
When pnfs IO fails which triggers pnfs_write_done_resent_to_mds() which
would end up clearing nfs_pgio_header's pages structure (copying the
content into a new one to do new RPC calls to the MDS). Thus,
in nfs_writeback_result() when we have no pages to work with no need
to try and also therefore skip logging the message about 0bytes.
Fixes: 6c75dc0d49 ("NFS: merge _full and _partial write rpc_ops")
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
- Warn only once about invalid ACS kernel parameter format (Richard Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the current
value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)
* pci/misc:
PCI: Clean up dead code in Kconfig
PCI/sysfs: Suppress FW_BUG warning when NUMA node already matches
PCI: Use pr_warn_once() for ACS parameter parse failure
PCI: of: Reduce severity of missing of_root error message
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than intended
region and enforce alignment on size, to prepare for RZ/G3E support (John
Madieu)
- Fix renesas,r9a08g045s33-pcie 'serr_cor' typo and convert properties from
'description' to 'const' for better validation (John Madieu)
- Add RZ/G3E to DT binding and to driver (John Madieu)
* pci/controller/rzg3s-host:
PCI: rzg3s-host: Add support for RZ/G3E PCIe controller
PCI: rzg3s-host: Add PCIe Gen3 (8.0 GT/s) link speed support
PCI: rzg3s-host: Explicitly set class code for RZ/G3E compatibility
PCI: rzg3s-host: Add SoC-specific configuration and initialization callbacks
PCI: rzg3s-host: Make configuration reset lines optional
PCI: rzg3s-host: Make SYSC register offsets SoC-specific
dt-bindings: PCI: renesas,r9a08g045s33-pcie: Document RZ/G3E SoC
dt-bindings: PCI: renesas,r9a08g045s33-pcie: Fix naming properties
PCI: rzg3s-host: Rework inbound window algorithm for supporting RZ/G3E SoC
PCI: rzg3s-host: Reorder reset assertion during suspend
PCI: rzg3s-host: Fix reset handling in probe error path
# Conflicts:
# drivers/pci/controller/pcie-rzg3s-host.c
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu Tsai)
- Initialize IRQ domains earlier to remove need for cleanup if it fails
(Chen-Yu Tsai)
- Set up controller windows and MSI before bringing the link up to separate
controller init and things related to downstream devices (Chen-Yu Tsai)
- Split out device power up and down helpers (Chen-Yu Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT adapters on
mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
- Prevent leaking IRQ domains when IRQ not found (Chen-Yu Tsai)
* pci/controller/mediatek-gen3:
PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found
PCI: mediatek-gen3: Integrate new pwrctrl API
PCI: mediatek-gen3: Disable device if further setup fails
PCI: mediatek-gen3: Split out device power helpers
PCI: mediatek-gen3: Add error path for resume driver callbacks
PCI: mediatek-gen3: Move controller setup steps before PERST# control
PCI: mediatek-gen3: Move mtk_pcie_setup_irq() out of mtk_pcie_setup()
PCI: mediatek-gen3: Clean up mtk_pcie_parse_port() with dev_err_probe()
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Increase LTSSM poll time on surprise link down (Manikanta Maddireddy)
- Disable LTSSM after transition to Detect on surprise link down to stop
toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending or
shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not registered in
Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change is
controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0 latency
(Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- During remove, free resources allocated during Endpoint .probe() (Vidya
Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234 erratum
(Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB timeout
(Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side can
bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state from
any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so DMA
driver and Endpoint controller driver can share the interrupt line (Vidya
Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint modes
(Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint mode
(Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya Sagar)
* pci/controller/dwc-tegra194:
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
PCI: tegra194: Disable PERST# IRQ only in Endpoint mode
PCI: tegra194: Don't force the device into the D0 state before L2
PCI: tegra194: Disable LTSSM after transition to Detect on surprise link down
PCI: tegra194: Increase LTSSM poll time on surprise link down
PCI: tegra194: Fix polling delay for L2 state
- Mark BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
* pci/controller/dwc-rcar-gen4-ep:
PCI: dwc: rcar-gen4: Change EPC BAR alignment to 4K as per the documentation
PCI: dwc: rcar-gen4: Mark BAR0 and BAR2 as Resizable BARs in endpoint mode
# Conflicts:
# drivers/pci/controller/dwc/pcie-rcar-gen4.c
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support' since
Qcom Root Ports support hotplug events like DL_Up/Down and can accept
writes to Slot Control without delays between writes (Krishna Chaitanya
Chundru)
* pci/controller/dwc-qcom:
PCI: qcom: Advertise Hotplug Slot Capability with no Command Completion support
- Allow Layerscape host controller driver to be build as a removable module
(Sascha Hauer)
* pci/controller/dwc-layerscape:
PCI: layerscape: Allow to compile as module
- Fix device node reference leak in imx_pcie_probe() (Felix Gu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible (Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset (for
resetting the RC itself) to prepare for new DTs with PERST# GPIO in
per-Root Port nodes (Sherry Sun)
- Retain the Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix the i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
* pci/controller/dwc-imx6:
PCI: imx6: Fix reference clock source selection for i.MX95
PCI: imx6: Keep Root Port MSI capability with iMSI-RX to work around hardware bug
PCI: imx6: Separate PERST# assertion from core reset functions
PCI: imx6: Change imx_pcie_deassert_core_reset() return type to void
PCI: imx6: Skip waiting for L2/L3 Ready on i.MX6SX
PCI: imx6: Fix device node reference leak in imx_pcie_probe()
- Correct the IRQ number logged in INTx error message (Rakuram Eswaran)
* pci/controller/dwc-amd-mdb:
PCI: amd-mdb: Correct IRQ number in INTx error message
- Continue with system suspend even if an Endpoint doesn't respond with
PME_TO_Ack message (Manivannan Sadhasivam)
- Remove the Baikal-T1 controller driver since it never quite became usable
(Andy Shevchenko)
- Set Endpoint MSI-X Table Size in the correct function of a multi-function
device when configuring MSI-X, not in Function 0 (Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Clean up in the dw_pcie_resume_noirq() error path (Manivannan Sadhasivam)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
- Fix type mismatch for kstrtou32_from_user() in debugfs write functions
(Hans Zhang)
* pci/controller/dwc:
PCI: dwc: Fix type mismatch for kstrtou32_from_user() return value
PCI: dwc: Expose PCIe event counters for groups 5 to 7 over debugfs
PCI: dwc: Perform cleanup in the error path of dw_pcie_resume_noirq()
PCI: dwc: ep: Mirror the max link width and speed fields to all functions
PCI: dwc: ep: Fix MSI-X Table Size configuration in dw_pcie_ep_set_msix()
PCI: dwc: Remove not-going-to-be-supported code for Baikal SoC
PCI: dwc: Proceed with system suspend even if the endpoint doesn't respond with PME_TO_Ack message
- Release ECAM config on probe failure (Felix Gu)
* pci/controller/cadence-sky1:
PCI: sky1: Use boolean true for is_rc field
PCI: sky1: Fix missing cleanup of ECAM config on probe failure
- Add cadence core flags to disable advertising broken ASPM support (Yao
Zi)
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that advertise
support for them (Yao Zi)
* pci/controller/cadence-sg2042:
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
