Currently the slot width in non-TDM mode is always kept at the POR value
of 32 bits, regardless of the sample width, which doesn't work well for
some codecs such as NAU8822.
Set the slot width according to the sample width in non-TDM mode, which
is what other CPU DAI drivers do.
Tested on the following RK3576 configurations:
- SAI2 + NAU8822 (codec as the clock master), custom board
- SAI1 + ES8388 (codec as the clock master), RK3576 EVB1
- SAI2 + RT5616 (SAI as the clock master), FriendlyElec NanoPi M5
NAU8822 didn't work prior to this patch but works after the patch. Other
two configurations work both before and after the patch.
Fixes: cc78d1eaab ("ASoC: rockchip: add Serial Audio Interface (SAI) driver")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260318-sai-slot-width-v1-1-1f68186f71e3@flipper.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Drivers will not always call set_sysclk() for all clocks, especially when
default mclk-fs can be used.
When that is the case, use the clock rate set in the params multiplied by the
default mclk-fs.
Fixes: 5323186e2e ("ASoC: rockchip: i2s_tdm: Re-add the set_sysclk callback")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260218201834.924358-1-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the driver to use FIELD_PREP to increase readability.
This also fixes an issue that the SDPIF_CFGR_VDW_MASK was wrong,
which didn't have any effects as the only user in the driver
updates the other bits at the same time.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-10-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Treat 32 bit sample width as if it was 24 bits using only the
24 most significant bits.
[I've merged the channel-swapping fix from Zohn Ni into Sugar Zhang's
patch introducing the problem in the first place]
Co-developed-by: Zohn Ni <zohn.ni@rock-chips.com>
Signed-off-by: Zohn Ni <zohn.ni@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-8-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver mixes device managed resources with unmanaged ones
and (as a lot of them do) gets the order wrong resulting in
potential race condition problems at module removal time. Let's
go to full device managed resources to cleanup the code and get
rid of the potential race condition.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-3-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move rk_spdif_match DT compatible table to the usual place before the
platform-driver struct definition and drop the useless of_match_ptr(),
since it is fine to reference the DT id table even when OF support is
disabled (which makes the driver useless anyways).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-2-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use device_get_match_data(), so that the probe routine does not
directly reference the of_match_table. This allows moving the
table at the end of the file where most recent drivers have it.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-1-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is better to check directly whether or not CONFIG_PM has
been enabled instead of relying on an error value returned by
pm_runtime_put() in that case because pm_runtime_put() may also return
an error value in other cases, like after writing "on" to the devices'
runtime PM "control" attribute in sysfs for one example.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5160923.0VBMTVartN@rafael.j.wysocki
Signed-off-by: Mark Brown <broonie@kernel.org>
'version' is an enum, thus cast of pointer on 64-bit compile test with
clang W=1 causes:
rockchip_pdm.c:583:17: error: cast to smaller integer type 'enum rk_pdm_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
This was already fixed in commit 49a4a8d126 ("ASoC: rockchip: Fix
Wvoid-pointer-to-enum-cast warning") but then got bad in
commit 9958d85968 ("ASoC: Use device_get_match_data()").
Discussion on LKML also pointed out that 'uintptr_t' is not the correct
type and either 'kernel_ulong_t' or 'unsigned long' should be used,
with several arguments towards the latter [1].
Link: https://lore.kernel.org/r/CAMuHMdX7t=mabqFE5O-Cii3REMuyaePHmqX+j_mqyrn6XXzsoA@mail.gmail.com/ [1]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251203141644.106459-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We would like to hide struct snd_soc_dapm_context from driver. So we need
cleanup code first. Current ASoC have very similar functions (A)(B).
(A) snd_soc_kcontrol_component()
(B) snd_soc_dapm_kcontrol_component()
(B) is using very picky way to get component but using it is necessary in
ASoC. But (A) is just wrapper function to snd_kcontrol_chip(), and directly
using it without wrapper is very common way on ALSA.
This patch-set doesn't merge patches for each vender etc, because it makes
backport difficult.
An error code was assigned to a variable and checked accordingly.
This value was passed to a dev_err_probe() call in an if branch.
This function is documented in the way that the same value is returned.
Thus delete a redundant variable reassignment.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patch.msgid.link/115fba03-e8ba-4bc1-84d8-7d483c06208c@web.de
Signed-off-by: Mark Brown <broonie@kernel.org>
We have very similar name functions (A)(B). Both gets component from
snd_kcontrol, but (A) is used in callback functions which is registered
through snd_soc_add_component_controls(), (B) is used through
snd_soc_dapm_new_widgets().
(A) snd_soc_kcontrol_component()
(B) snd_soc_dapm_kcontrol_component()
(B) is using very picky way to get component but using it is necessary in
ASoC. But (A) is just wrapper function to snd_kcontrol_chip(), and directly
using it without wrapper is very common way on ALSA.
To reduce confusions of similar function, let's use common way on (A).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h5w2m7ju.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.
Replace the implementation of this driver's HIWORD_UPDATE macro with an
instance of FIELD_PREP_WM16_CONST. The const variant is chosen here
because some of the header defines are then used in initializers.
This gives us some compile-time error checking, while keeping the diff
very small and easy to review.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
of_gpio.h is deprecated. And there is no user in this driver
using API in of_gpio.h, so remove it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20250704130906.1207134-1-peng.fan@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu, like below
--- ALSA for SoC audio support
Analog Devices --->
AMD --->
Apple --->
Atmel --->
Au1x ----
Broadcom --->
Cirrus Logic --->
DesignWare --->
Freescale --->
Google --->
Hisilicon --->
...
One concern is *vender folder* alphabetical order vs *vender name*
alphabetical order were different. For example "sunxi" menu is
"Allwinner".
Link: https://lore.kernel.org/r/8734c8bf3l.wl-kuninori.morimoto.gx@renesas.com
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plf9ybqp.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 7ef9651e97 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables the clocks for the
whole lifetime of the device. Moreover, it is no longer necessary to
unprepare and disable the clocks explicitly.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Acked-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/84bc40641d05596f1edf4f01d1e6aea16bdbeeb5.1749201126.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Correcting the capture stream handling which was incorrectly setting
playback=true for capture streams.
The original code mistakenly set playback=true for capture streams,
causing incorrect behavior.
Fixes: cc78d1eaab ("ASoC: rockchip: add Serial Audio Interface (SAI) driver")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Acked-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/c374aae92c177aaf42c0f1371eccdbc7e9615786.1749201126.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The Rockchip RK3576 SoC features a new audio controller, the Serial
Audio Interface, or SAI for short. It is capable of both sending and
receiving audio over up to 4 lanes for each direction using the I2S,
PCM or TDM formats.
This driver is derived from the downstream vendor driver. That is why
its original author, Sugar Zhang, is listed as a Co-developer, with
their signoff. Since adjustments to make the driver suitable for
upstream were quite extensive, I've added myself to the authors and put
myself as the commit author; all added bugs are my fault alone, and not
that of the original author at Rockchip.
The hardware is somewhat similar to the Rockchip I2S-TDM hardware when
judged based on their register map, except it uses the same mclk for
tx and rx. It appears to be much more flexible with regards to TDM.
The loopback stuff and mono mode are new as well.
In line with the changes that were made to the Rockchip I2S-TDM driver
after upstreaming, the mclk-calibrate functionality was dropped, and
setting the mclk rate properly is now left up to the Common Clock
Framework, similar to how it is in the upstream I2S-TDM driver now.
A spinlock has been introduced to protect register write accesses that
depend on the bclk/fs to be stopped, i.e. XFER[1:0] being 0. I couldn't
find whether the asoc core held a per-instance lock so only one callback
can run at a time, and so it seemed prudent to add this.
I couldn't successfully test whether TDM was working, though I've tried
with a TAS6424 codec board. I'm not sure yet whether to blame the codec
driver, this version of the SAI driver, or the vendor implementation of
the SAI driver. The TDM mask registers remain untouched in both this
version and the downstream vendor version, which is suspicious, though
the Linux ASoC core wouldn't be able to support the 128 (!!!) slots of
TDM the hardware supports anyway.
Regular old 2-channel stereo I2S thrown at an I2S stereo codec works
well though. I tested with the CPU-side SAI controller in provider mode
and an Everest ES8388 codec as the consumer.
Some vendor driver features (no-dmaengine, fifo rockchip performance
monitoring, many kcontrols) were dropped for this initial upstream
version. They can always be added later if they make sense for upstream.
Co-developed-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20250410-rk3576-sai-v2-6-c64608346be3@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us to drop ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-76-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 2f45a4e289 ("ASoC: rockchip: i2s_tdm: Fixup config for
SND_SOC_DAIFMT_DSP_A/B") applied a partial change to fix the
configuration for DSP A and DSP B formats.
The shift control also needs updating to set the correct offset for
frame data compared to LRCK. Set the correct values.
Fixes: 081068fd64 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://patch.msgid.link/20250204161311.2117240-1-jkeeping@inmusicbrands.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit
9e2ab4b18e ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates"),
the set_sysclk callback was removed as considered unused as the mclk rate
can be set in the hw_params callback.
The difference between hw_params and set_sysclk is that the former is
called with the audio sampling rate set in the params (e.g.: 48000 Hz)
while the latter is called with a clock rate already computed with
sampling_rate * mclk-fs (e.g.: 48000 * 256)
For HDMI audio using the Rockchip I2S TDM driver, the mclk-fs value must
be set to 128 instead of the default 256, and that value is set in the
device tree at the machine driver level (like a simple-audio-card
compatible node).
Therefore, the i2s_tdm driver has no idea that another mclk-fs value can
be configured and simply computes the mclk rate in the hw_params callback
with DEFAULT_MCLK_FS * params_rate(params), which is wrong for HDMI
audio.
Re-add the set_sysclk callback so that the mclk rate is computed by the
machine driver which has the correct mclk-fs value set in its device tree
node.
Fixes: 9e2ab4b18e ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://patch.msgid.link/20250117163102.65807-1-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit fixes a useless call issue detected by Coverity
(CID 1507978). The call to rockchip_i2s_ch_to_io is unnecessary as its
return value is never checked or used. As a result, the function
definition and call is removed.
Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com>
Link: https://patch.msgid.link/20241118045605.48440-1-dheeraj.linuxdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all drivers below sound/soc to use .remove(), with the eventual
goal to drop struct platform_driver::remove_new(). As .remove() and
.remove_new() have the same prototypes, conversion is done by just
changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909151230.909818-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated and subject to remove. The drivers in question
don't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
When TRCM mode is enabled, I2S RX and TX clocks are synchronized through
selected clock source. Without this fix BCLK and LRCK might get parented
to an uninitialized MCLK and the DAI will receive data at wrong pace.
However, unlike in original i2s-tdm driver, there is no need to manually
synchronize mclk_rx and mclk_tx, as only one gets used anyway.
Tested on a board with RK3568 SoC and Silergy SY24145S codec with enabled and
disabled TRCM mode.
Fixes: 9e2ab4b18e ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates")
Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240604184752.697313-1-a1ba.omarov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-22-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The sample rates set by the rockchip_i2s_tdm driver in master mode are
inaccurate up to 5% in several cases, due to the driver logic to configure
clocks and a nasty interaction with the Common Clock Framework.
To understand what happens, here is the relevant section of the clock tree
(slightly simplified), along with the names used in the driver:
vpll0 _OR_ vpll1 "mclk_root"
clk_i2s2_8ch_tx_src "mclk_parent"
clk_i2s2_8ch_tx_mux
clk_i2s2_8ch_tx "mclk" or "mclk_tx"
This is what happens when playing back e.g. at 192 kHz using
audio-graph-card (when recording the same applies, only s/tx/rx/):
0. at probe, rockchip_i2s_tdm_set_sysclk() stores the passed frequency in
i2s_tdm->mclk_tx_freq (*) which is 50176000, and that is never modified
afterwards
1. when playback is started, rockchip_i2s_tdm_hw_params() is called and
does the following two calls
2. rockchip_i2s_tdm_calibrate_mclk():
2a. selects mclk_root0 (vpll0) as a parent for mclk_parent
(mclk_tx_src), which is OK because the vpll0 rate is a good for
192000 (and sumbultiple) rates
2b. sets the mclk_root frequency based on ppm calibration computations
2c. sets mclk_tx_src to 49152000 (= 256 * 192000), which is also OK as
it is a multiple of the required bit clock
3. rockchip_i2s_tdm_set_mclk()
3a. calls clk_set_rate() to set the rate of mclk_tx (clk_i2s2_8ch_tx)
to the value of i2s_tdm->mclk_tx_freq (*), i.e. 50176000 which is
not a multiple of the sampling frequency -- this is not OK
3a1. clk_set_rate() reacts by reparenting clk_i2s2_8ch_tx_src to
vpll1 -- this is not OK because the default vpll1 rate can be
divided to get 44.1 kHz and related rates, not 192 kHz
The result is that the driver does a lot of ad-hoc decisions about clocks
and ends up in using the wrong parent at an unoptimal rate.
Step 0 is one part of the problem: unless the card driver calls set_sysclk
at each stream start, whatever rate is set in mclk_tx_freq during boot will
be taken and used until reboot. Moreover the driver does not care if its
value is not a multiple of any audio frequency.
Another part of the problem is that the whole reparenting and clock rate
setting logic is conflicting with the CCF algorithms to achieve largely the
same goal: selecting the best parent and setting the closest clock
rate. And it turns out that only calling once clk_set_rate() on
clk_i2s2_8ch_tx picks the correct vpll and sets the correct rate.
The fix is based on removing the custom logic in the driver to select the
parent and set the various clocks, and just let the Clock Framework do it
all. As a side effect, the set_sysclk() op becomes useless because we now
let the CCF compute the appropriate value for the sampling rate. It also
implies that the whole calibration logic is now dead code and so it is
removed along with the "PCM Clock Compensation in PPM" kcontrol, which has
always been broken anyway. The handling of the 4 optional clocks also
becomes dead code and is removed.
The actual rates have been tested playing 30 seconds of audio at various
sampling rates before and after this change using sox:
time play -r <sample_rate> -n synth 30 sine 950 gain -3
The time reported in the table below is the 'real' value reported by the
'time' command in the above command line.
rate before after
--------- ------ ------
8000 Hz 30.60s 30.63s
11025 Hz 30.45s 30.51s
16000 Hz 30.47s 30.50s
22050 Hz 30.78s 30.41s
32000 Hz 31.02s 30.43s
44100 Hz 30.78s 30.41s
48000 Hz 29.81s 30.45s
88200 Hz 30.78s 30.41s
96000 Hz 29.79s 30.42s
176400 Hz 27.40s 30.41s
192000 Hz 29.79s 30.42s
While the tests are running the clock tree confirms that:
* without the patch, vpll1 is always used and clk_i2s2_8ch_tx always
produces 50176000 Hz, which cannot be divided for most audio rates
except the slowest ones, generating inaccurate rates
* with the patch:
- for 192000 Hz vpll0 is used
- for 176400 Hz vpll1 is used
- clk_i2s2_8ch_tx always produces (256 * <rate>) Hz
Tested on the RK3308 using the internal audio codec.
Fixes: 081068fd64 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240305-rk3308-audio-codec-v4-1-312acdbe628f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the driver core can properly handle constant struct bus_type,
move the i2c_bus_type variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Note, the sound/soc/rockchip/rk3399_gru_sound.c also needed tweaking as
it decided to save off a pointer to a bus type for internal stuff, and
it was using the i2c_bus_type as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Commit 9958d85968 ("ASoC: Use device_get_match_data()") dropped the
unconditional use of rockchip_i2s_tdm_match resulting in this warning:
sound/soc/rockchip/rockchip_i2s_tdm.c:1315:34: warning: 'rockchip_i2s_tdm_match' defined but not used [-Wunused-const-variable=]
The fix is to drop of_match_ptr() which is not necessary because DT is
always used for this driver.
Fixes: 9958d85968 ("ASoC: Use device_get_match_data()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310121802.CDAGVdF2-lkp@intel.com/
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231030142337.814907-2-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231013221945.1489203-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Rob Herring <robh@kernel.org>:
This is a series is part of ongoing clean-ups related to device
matching and DT related implicit includes. Essentially of_device.h has
a bunch of implicit includes and generally isn't needed any nore except
for of_match_device(). As we also generally want to get rid of
of_match_device() as well, I've done that so we're not updating the
includes twice.
This converts the Rockchip RK3288 HDMI driver to use GPIO
descriptors:
- Look up the HP EN GPIO as an optional descriptor and handle
it directly, the gpiod API is NULL-tolerant so no special
guards are needed.
- Let the Jack detection core obtain and handle the HP detection
GPIO, just pass the right name and gpiod_dev and it will
do the job. Make sure to check that the GPIO property
is there first, so it becomes optional.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230929-descriptors-asoc-rockchip-v2-1-2d2c0e043aab@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-5-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
