Add a set of test cases for cs_amp_set_efi_calibration_data().
Broadly there are two type of behavior being tested:
How the EFI is updated:
- Create a new EFI
- Overwrite part of existing content
- Overwrite part of zero-filled preallocated content
- Grow the file to append new content
And how the location within the content is chosen:
- Overwrite a specific array entry
- Overwrite an entry with the same calTarget (silicon ID)
- Overwrite a free entry
- Append after existing data
Plus some cases for error conditions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new command 'store_uefi' to the calibrate debugfs file.
Writing this command will call cs_amp_set_efi_calibration_data()
to save the new data into a UEFI variable. This is intended to
be used after a successful factory calibration.
On systems without UEFI the write to the debugfs file will
return an error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add cs_amp_set_efi_calibration_data() to write an amp calibration
blob to UEFI calibration variable.
The UEFI variable will be updated or created as necessary.
- If a Vendor-specific variable exists it will be updated,
else if the Cirrus variable exists it will be update
else the Cirrus variable will be created.
Some collateral changes are required:
- cs_amp_convert_efi_status() now specifically handles
EFI_WRITE_PROTECTED error.
- cs_amp_get_cal_efi_buffer() can optionally return the name,
guid and attr of the variable it found.
- cs_amp_get_cal_efi_buffer() will update the 'size' field of
the returned data blob if it is zero. The BIOS could have
pre-allocated the UEFI variable as zero-filled
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a pointer argument to cs_amp_get_efi_variable() to optionally
return the EFI variable attributes.
Originally this function internally consumed the attributes from
efi.get_variable(). The calling code did not use the attributes
so this was a small simplification.
However, when writing to a pre-existing variable we would want to
pass the existing attributes to efi.set_variable(). This patch
deals with the change to return the attribute in preparation for
adding code to update the variable.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add test cases for the cs_amp_read_cal_coeffs() and
cs_amp_write_ambient_temp() functions.
In both cases the test is simply to confirm that the correct data
value(s) get passed back to the caller.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add core code to support factory calibration. This can be used by both
the ASoC and HDA drivers.
This code consists of implementations of debugfs handlers for three
debugfs files used to start factory calibration and read the results.
This is not a full implementation of debugfs files. There are some
requirements to synchronize with the rest of the amp driver, and the way
this is done is significantly different between ASoC and HDA. Therefore
cs35l56-shared.c provides the main part of the file handlers, but the
files themselves are defined in the ASoC and HDA drivers with suitable
handling before calling into this shared code.
The cal_data file allows the calibration to be read and also for a
previous calibration to be written (for systems where the storage is not
something directly accessible to drivers, such as on filesystems). Code
outside the kernel should treat the content of cal_data as an opaque blob,
so the struct definition is not exported as a user API.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper functions for performing factory calibration.
cs_amp_read_cal_coeffs() reads the results of a calibration into a
struct cirrus_amp_cal_data. The calTime member is also filled in with
the current time (which is defined to be in Windows format).
cs_amp_write_ambient_temp() writes a given temperature value to the
firmware control for ambient temperature.
The cs_amp_cal_target_u64() has been moved into the header file so
that it can be used by the calling code and by KUnit tests.
cs_amp_create_debugfs() creates a debugfs directory to contain
debugfs files related to calibration. This is placed in a directory
in debugfs root, named "cirrus_logic". The purpose of this is to
make it easier for tooling to find the files it needs by keeping
control of the layout under this directory. By contrast the ASoC
debugfs can vary between kernel releases and doesn't have a strictly
stable naming convention. HDA does not have a debugfs directory at all
and enabling the general ALSA debugfs (which is normally disabled) has
other side-effects.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Read the silicon ID from the amp during one-time cs35l56_hw_init()
and store it in struct cs35l56_base, instead of reading it from
registers every time it is needed.
Note that marking it non-volatile without a default in regmap isn't
a suitable alternative because this causes regcache_sync() to always
write the cached value out to the registers. This could trigger a bus
fault interrupt inside the amp, which we want to avoid.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We would like to hide struct snd_soc_dapm_context from driver. So we need
cleanup code first. Current ASoC have very similar functions (A)(B).
(A) snd_soc_kcontrol_component()
(B) snd_soc_dapm_kcontrol_component()
(B) is using very picky way to get component but using it is necessary in
ASoC. But (A) is just wrapper function to snd_kcontrol_chip(), and directly
using it without wrapper is very common way on ALSA.
This patch-set doesn't merge patches for each vender etc, because it makes
backport difficult.
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
All driver is now using snd_kcontrol_chip() instead of
snd_soc_kcontrol_component() to get component.
Remove snd_soc_kcontrol_component().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87bjmam7jf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Currently, we create a ACPI mach table for every new audio
configuration. And all Intel SOF SoundWire configurations point to the
same sof_sdw machine driver. Also, we don't need a specific topology for
a coufguration, we can use the function topology instead. That give us a
change to generate an ACPI mach table based on the SoundWire codec
information reported by the ACPI table and use the sof_sdw machine
driver as the default machine driver.
This will reduce the effort to support a new Intel SOF SoundWire audio
configuration.
asoc_sdw_get_dai_type() is quite useful to convert SDCA function types
to SDW DAI types. It can be used by other drivers.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the codec name_prefix of Intel SoundWire machine driver is
from the ACPI match table. We can have it in the asoc_sdw_codec_info
struct as a default name_prefix of a codec if there is no corresponding
audio config found in the ACPI match table.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we use predefined snd_soc_acpi_link_adr tables to match the
link adr from ACPI table to select the machine driver and the topology.
However, with the mechanism, we need to create the snd_soc_acpi_link_adr
table for each audio config. The sof_sdw machine driver is used by
almost all Intel platforms with SOF and we can load required topology
file dynamically today. In other words, we can use sof_sdw machine
driver as the default machine driver for Intel SOF SoundWire codecs and
no need to create snd_soc_acpi_link_adr table for every new audio
configs.
To achieve it, we need to drop the const for some members and edit the
link adr and acpi adr data to match the data from the ACPI table.
Suggested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IEC958 subframe format SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE are used
in HDMI and DisplayPort to describe the audio stream, but hardware device
may need to reorder the IEC958 bits for internal transmission, so need
these standard bits definitions for IEC958 subframe format.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-3-shengjiu.wang@nxp.com
Some more updates for v6.18, mostly fixes for the earlier pull request
with some cleanups and more minor fixes for older code. We do have one
new driver, the TI TAS2783A, and some quirks for new platforms.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjZIZAACgkQJNaLcl1U
h9DZqgf+L+U/ysqynLO6NncBatsP3QHBxL8Op8DhOUG8cmtKwUHgeNJPaNDPA/rF
b6WLe6yZBXpBLyDtWo/eHwxC3pdOPJ7JcFWhpZcYMBKfxwszzki72OiZerxkwuUS
mFVr0EFkB/cbqkw9D8AF5tOMlauSDNjJQUiuNDOKD7BYvFNtuY3wOYvIA/kaW86l
SlAb3dD4pOhYP8mgPP8v8h83LyHr3NnIEX4uVSQTxZ98zZmL08FB2sCv4bzqZuag
pI6cDF1qlOT5y1CKLXIZ1JoflrUiEYyB9X1eb/rW2+8/USGzC4enr2cEm4phU3te
X4MV3N3BulSq03xewX0Jw19mdQE0Hg==
=91Ur
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.18 round 2
Some more updates for v6.18, mostly fixes for the earlier pull request
with some cleanups and more minor fixes for older code. We do have one
new driver, the TI TAS2783A, and some quirks for new platforms.
This adds support for changed firmware addresses on the B2 revision of
CS35L56 silicon.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Defer setting the cs35l56_base.fw_regs pointer until after the REVID has
been read in cs35l56_hw_init(). Also make the corresponding change to the
cs35l56_hda drivers to prevent a build break.
This is preparing for firmware registers that change address between
revisions of the same device.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
In PC systems using ACPI, the driver is able to read back an SSID from
the _SUB property. This SSID uniquely identifies the system, which
enables the driver to read the correct firmware and tuning for that
system from linux-firmware. Currently there is no way of reading this
property from device tree. Add an equivalent property in device tree
to perform the same role.
Machine driver amp utility file to initialize and support
multiple tas2783a devices are added.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
--
v5:
- removed empty line in soc_sdw_ti_amp.c
Link: https://patch.msgid.link/20250912083624.804-3-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A relatively quiet release for ASoC, we've had a lot of maintainance
work going on and several new drivers but really the most remarkable
thing is that we removed a driver, the WL1273 driver used in some old
Nokia systems that have had the underlying system support removed from
the kernel.
- Morimoto-san continues his work on cleanups of the core APIs and
enforcement of abstraction layers.
- Lots of cleanups and conversions of DT bindings.
- Substantial maintainance work on the Intel AVS drivers.
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754.
- Remove support for TI WL1273.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjNx/QACgkQJNaLcl1U
h9A+oQf/a/hKhCdmDVl8LE/a5dTExQqpzxvLpWxUBwiYykh5B08n/adS7oALRyBK
IfkbGfwpA4N2dGtwrluy4VATyQBTe8SUboX6iP1cxifbWG8+EDuVfpkdUl/R3fcK
gPm41C/2Xk+GoAF4StfijPKg2PV8mUOWmTrxNm2QswGpkXxOFO4PI2GbTwsABDeU
cv+EK7PUZHhKFUOu1ELLi1HmgI57TMK7Kb3I+ETcKNZ3ZiCaLs7Vkje5z2IUhSZZ
+Z/EDnLKUmvYRmbkA48aFas4hpafkT7jrmGrk95mju/W0Udd9Ggm4MSF6+9DN4MF
buaNixQZlIwVz68zapcVtrFedxKLEQ==
=6T3w
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.18
A relatively quiet release for ASoC, we've had a lot of maintainance
work going on and several new drivers but really the most remarkable
thing is that we removed a driver, the WL1273 driver used in some old
Nokia systems that have had the underlying system support removed from
the kernel.
- Morimoto-san continues his work on cleanups of the core APIs and
enforcement of abstraction layers.
- Lots of cleanups and conversions of DT bindings.
- Substantial maintainance work on the Intel AVS drivers.
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754.
- Remove support for TI WL1273.
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Many drivers are directly setting dapm->idle_bias, but it will be
impossible soon. adds snd_soc_dapm_set_idle_bias() for them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfbavllj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Many drivers are directly using dapm->idle_bias, but it should get it
via get_idle_bias() function. Makes it as global function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/871pomx062.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-dapm is using "idle_bias_off", and its default settings
came from snd_soc_component "idle_bias_on". It is complicated/confusable.
Let's handling it as "idle_bias".
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874itix06a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can directly use suspend_bias_off via snd_soc_component, no need
to keep it on dapm. Remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xdyx06e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Current dapm of card/component are using "instance", but it will be
"pointer" if snd_soc_dapm_context was removed from header.
snd_soc_card_to_dapm() is needed to switch to the new style while
maintaining compatibility
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877byex06i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Current dapm of card/component are using "instance", but it will be
"pointer" if snd_soc_dapm_context was removed from header.
snd_soc_component_to_dapm() is needed to switch to the new style while
maintaining compatibility
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/878qiux06m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Now, snd_soc_dapm_to_component() (A) will convert dapm to component by
container_of() (a).
(A) static inline struct snd_soc_component *snd_soc_dapm_to_component(
struct snd_soc_dapm_context *dapm)
{
(a) return container_of(dapm, struct snd_soc_component, dapm);
}
dapm of component works, but dapm of card will be "unknown" pointer
(= not NULL), because (a) is using "container_of()".
OTOH, ASoC will call snd_soc_dapm_init() (X) to initialize dapm, and
it will be called from snd_soc_bind_card() (p) (for card) or
soc_probe_component() (q) (for component) with component pointer.
(p) static int snd_soc_bind_card(...)
{
...
(X) snd_soc_dapm_init(..., NULL);
... ^^^^
}
(q) static int soc_probe_component(...)
{
...
(X) snd_soc_dapm_init(..., component);
... ^^^^^^^^^
}
And snd_soc_dapm_init() (X) will fill dapm->component (x)
(X) void snd_soc_dapm_init(..., component, ...)
{
...
(x) dapm->component = component;
...
}
We can simply use dapm->component in snd_soc_dapm_to_component() (A).
In this case, dapm of card (p) will be just NULL.
Use dapm->component instead of container_of().
The picky note can be removed by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a53ax06q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Some drivers need to get card from dapm (which will be removed).
We need such function. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87bjnqx06v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Some drivers need to get dev from dapm (which will be removed).
We need such function. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cy86x06z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series adds handling for vendor-specific UEFI variables from Lenovo
and HP. These vendors will switch to using their UEFI variables instead
of the normal Cirrus Logic-defined mechanisms.
The model of speaker fitted (Speaker ID) is normally signaled by a GPIO,
and the driver is given access to this GPIO. Lenovo and HP will both stop
giving the driver access to the GPIO and instead the BIOS will create a
UEFI variable giving the value of the GPIO.
HP will also start using their own UEFI variable to store amp calibration
data. The content of the variable is the same as the Cirrus Logic variable,
only the UEFI name and GUID are changed.
Change in v2:
Removed unused target_uid variable and code that set it in patch 6.
Richard Fitzgerald (6):
ASoC: cs-amp-lib: Rename defines for Cirrus Logic EFI
ASoC: cs-amp-lib: Add handling for Lenovo and HP UEFI speaker ID
ASoC: cs35l56: Check for vendor-specific speaker ID value
ASoC: cs-amp-lib-test: Add tests for cs_amp_get_vendor_spkid()
ASoC: cs-amp-lib: Add HP-specific EFI variable for calibration data
ASoC: cs-amp-lib-test: Add test for getting cal data from HP EFI
include/sound/cs-amp-lib.h | 1 +
sound/soc/codecs/cs-amp-lib-test.c | 252 ++++++++++++++++++++++++++++-
sound/soc/codecs/cs-amp-lib.c | 139 +++++++++++++++-
sound/soc/codecs/cs35l56-shared.c | 12 +-
4 files changed, 395 insertions(+), 9 deletions(-)
--
2.39.5
Add handling of the Lenovo-specific and HP-specific EFI variables for
speaker ID.
Future Lenovo and HP models will not give the codec driver access to the
speaker detect GPIO. Instead, the BIOS will read the GPIO and create an
EFI variable with a value indicating the state of the GPIO.
The Lenovo and HP EFI variables are both defined to have only two valid
values. But the variable name, GUID and values are different.
This adds a new exported function cs_amp_get_vendor_spkid().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20250909113039.922065-3-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add tas2020, tas2118, tas2120, tas2320, tas2570, tas2572, tas5825
tas5827 support in tas2781 driver.
Tas2118, tas2x20, tas257x have no on-chip DSP, tas582x have on-chip
DSP but have no calibration required stereo smart amplifier.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove the tlv320dac33_platform_data struct and header file
tlv320dac33-plat.h as they are not used anywhere in the kernel
or outside this driver.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Message-ID: <20250901184008.1249535-3-alex.t.tran@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The copied_total field in struct snd_compr_tstamp is a 32-bit
value that can overflow on long-running high-bitrate streams,
leading to incorrect calculations for buffer availablility.
This patch adds a 64-bit safe timestamping mechanism.
A new UAPI struct, snd_compr_tstamp64, is added which uses 64-bit
types for byte counters. The relevant ops structures across the
ASoC and core compress code are updated to use this new struct.
ASoC drivers are updated to use u64 counters.
Internal timestamps being u64 now, a compatibility function is added
to convert the 64-bit timestamp back to the 32-bit format for legacy
ioctl callers.
Reviewed-by: Miller Liang <millerliang@google.com>
Tested-by: Joris Verhaegen <verhaegen@google.com>
Signed-off-by: Joris Verhaegen <verhaegen@google.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250905091301.2711705-2-verhaegen@google.com
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Just some minor SDCA bug fixes and some minor structure reordering to
improve the padding.
Remove some padding holes in the sdca_entity_hide struct by reordering
the members.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-ID: <20250820163717.1095846-4-ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 similar functions, both converts date from snd_kcontrol to
snd_soc_component.
(A) snd_soc_kcontrol_component()
(B) snd_soc_dapm_kcontrol_component()
(A) is just wrapper for snd_kcontrol_chip().
(B) is for more complex conversion.
Having similar functions is confusable. So (A) will be replaced to
original snd_kcontrol_chip(). (B) will be stay, but the function
name should be xx_to_xx().
And it is defined at soc-component.h. It should be implemented at
soc-dapm.c.
This patch renames it to snd_soc_dapm_kcontrol_to_component(), and
move to soc-dapm.c.
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/871poyy53x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dapm_kcontrol_get_value() is global function, adds snd_soc_ prefix
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87349ey546.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_kcontrol_dapm() is unclear naming, rename it to
snd_soc_dapm_kcontrol_to_dapm(). This is prepare for dapm cleanup.
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874ituy54c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_kcontrol_widget() is unclear naming, rename it to
snd_soc_dapm_kcontrol_to_widget(). This is prepare for dapm cleanup.
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xeay54j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define a macro for the preset locking/unlocking pairs for soundfont
using guard() macro as a further code cleanup.
The new macro is put in soundfont.h (and some function renames) along
with it for avoiding unnecessary troubles with clang.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250829151335.7342-6-tiwai@suse.de
Replace the manual mutex lock/unlock pairs with guard() for code
simplification.
As replaced with the guard(mutex), no longer used snd_gf1_mem_lock()
is dropped, too.
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250829145300.5460-8-tiwai@suse.de
The snd_emu1010_fpga_lock() and _unlock() call pairs can be simplified
gracefully with the introduction of guard().
Only code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250829144342.4290-28-tiwai@suse.de
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series improves the IPC4 probes implementation by improving the
report quality and adds support for querying the available probes
on the firmware side.
Add SOF_IPC4_MOD_INSTANCE_GET() and SOF_IPC4_MOD_ID_GET() for getting
the ids from ipc4 header presentation.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-ID: <20250829093022.32094-3-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are temporary DSP locking/unlocking patterns found in various
places, and those can be cleaned up nicely with the guard() macro
calling snd_hdac_dsp_lock() and *_unlock().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-7-tiwai@suse.de
The temporary power up/down of the codec via snd_hda_power_up() and
_down() (or snd_hda_power_up_pm() and _down_pm()) is seen in various
places. This patch introduces simple auto-cleanup macros for those
call patterns, so that the drivers don't have to call the
corresponding power-down calls explicitly.
Namely,
err = snd_hda_power_up(codec);
if (err < 0)
return err;
....
snd_power_down(codec);
can drop the *_down() call by replacing with
CLASS(snd_hda_power, pm)(codec);
if (pm.err < 0)
return pm.err;
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-2-tiwai@suse.de
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current Renesas MSIOF get unknown error when first used.
This patch-set will fixup this issue.
A few fixes that came in during the past week, there's some updates for
the CS35L56 which adjust the driver for production silicon and a fix for
buggy resume of the ES9389.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmimWXAACgkQJNaLcl1U
h9BGKAf+MczirBmF8BaLvCYqWRWmqhSMuNsKibzl8E3Acf2/NHhX1sdKsqOPss4L
Lje68EfywFP8U8/iARv6Aiijm1oIpF6C6U5GAd5ArInfmkIgITGF+OYObAmZdVbm
7NX8xSk4KgwCzZOv+3JG34wECmVtXrBnNpd7/Bo+RM+xxcxyUVUFcdMPuoUQvef9
Jc2cRDn9N9Lo7qi9DgXaBBH/cW4cgic1+CWEmoxSMtQJ1hXaxgaRYskfb5j4Sb1f
w1Lhw46eMMuTOkKQ1G8sJ0zqM/bS8ZkT0IFSSNDSRXXpLThPj/fNBjxYYBM01brG
r0shD5ju/2OgS13wWMPkfijzaU5dWw==
=nURg
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.17-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
A few fixes that came in during the past week, there's some updates for
the CS35L56 which adjust the driver for production silicon and a fix for
buggy resume of the ES9389.
CS35L63 uses different algorithm IDs from CS35L56.
Add a new mechanism to handle different alg IDs between parts in the
CS35L56 driver.
Fixes: 978858791c ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250820142209.127575-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Production silicon for CS36L63 has some small differences compared to
pre-production silicon. Update firmware addresses, which are different.
No product was ever released with pre-production silicon so there is no
need for the driver to include support for it.
Fixes: 978858791c ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250820142209.127575-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With some new devices adding into the driver, dvc_tlv and amp_vol_tlv will
cause confusion for customers on which devices they support.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250816042741.1659-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use min() to simplify snd_hda_get_devices() and improve its readability.
Change the function parameter 'max_devices' from 'int' to 'unsigned int'
to avoid a min() signedness error. Update all related local variables
and the function's return type to 'unsigned int' accordingly.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250813205507.215658-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
This is prepare patch for it.
Add TAS5825 support in TI's HDA driver.
TAS5825 is an on-chip DSP, but no calibration is required,
and no global address support smart amplifier devices.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250810122358.1575-1-baojun.xu@ti.com
Since version 0x105, the keyword 'init' was introduced into the profile,
which is used for chip initialization, particularly to store common
settings for other non-initialization profiles.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250803131110.1443-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The port_window_size is a struct member of dma slave channel runtime
config. It's the length of the register area in words the data need to
be accessed on the device side. It is only used for devices which is
using an area instead of a single register to send or receive the data.
Typically the DMA loops in this area in order to transfer the data.
It's useful for cases that reading/writing multiple registers in DMA
transactions.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20250808061741.187414-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
This patch unpack component wrapper to cleanup it.
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87y0rx6oyx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
This patch unpack component wrapper to cleanup it.
The function will be kept by using macro for a while, but will be
replaced/cleanuped in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfcd6oz0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
This patch unpack component wrapper to cleanup it.
The function will be kept by using macro for a while, but will be
replaced/cleanuped in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/871ppp83jk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Because dapm will not be used on user driver in the future, Let's move
snd_soc_dapm_init_bias_level() to soc-dpcm.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/8734a583jp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Because dapm will not be used on user driver in the future, Let's move
snd_soc_dapm_get_bias_level() to soc-dpcm.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874iul83ju.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a relatively small set of fixes and device quirks that came in
during the merge window, the AMD changes adding support for ACP 7.2
systems are all just adding IDs for the devices rather than any
substantial code - the actual code is the same as for prior versions of
the platform.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiTjXMACgkQJNaLcl1U
h9Dthgf8DEUHhOFBEdnesyCxf4+cCRuwN9XLlajUHEnSjnxHMZs5ewDm67DWfdJw
q2qZ0nx2tEFN9ktUa1GsaafCLxuFco5uqF6AzEb8LL5WKv8ukciz+6fc1YKNDJLZ
PFonUWf2m7TvoSD4Lonw2WTKstjVgvDnk7X79GKgd7gdU3f70+NkuLaEoytmX7bt
BSMEvcMhpI2mIB7+RKnMii8ZcwngLeEopoBoEqqWfDPvUZ+HSSIrgLpTVy+Q7sGO
aqznzM22slQ89jaI7yBE8SHtusB1ow8rWT3wHtJ2NnrJrZMX1v6lwB6Qx9+2TJ6g
+DoN7ECQj1Uqf8wp6Mo2CXFirWU+aw==
=vqli
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.17-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
This is a relatively small set of fixes and device quirks that came in
during the merge window, the AMD changes adding support for ACP 7.2
systems are all just adding IDs for the devices rather than any
substantial code - the actual code is the same as for prior versions of
the platform.
The wrong register was used for digital volume control of TAS2770,
The definition was changed, and usage was also updated.
Fixes: ab29b3460c ("ALSA: hda: Add TAS2770 support")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250729145849.55057-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few more updates, mostly fixes and device IDs plus some small
enhancements for the FSL xcvr driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiHZP8ACgkQJNaLcl1U
h9DzHgf7B38+Y0biLZA4PbhoT4jIqx7Z6cjzw4enVAd+heYD8dCrYIf+7mADCi/1
0rjJ76k8FvYyXUihvd+7Tm+0K9kBy8RHjA/KKiNUHqk12JziKg6fnTQTO2/zinQO
VjIrVtMediD7lUVDJ8NeN/xwpl4UagpyYi7JdWM12bBpcpxE8Hz+nvYZiAQKfaLC
6Fde6G1tTYQsfVnpEdidqNCIvlRCXsFbeWfBa3BDEC2gZwDuozs+caDD4zDgirJ4
+K31t9d9yWD2oqJALB1HrUZ35edzvc+AmWE6CfWIaN7pxgwdqqOIbL2jdcOdV6Sy
pbxrbXFQ8FKMm8knO7BtSsHhVtm22Q==
=jUba
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More updates for v6.17
A few more updates, mostly fixes and device IDs plus some small
enhancements for the FSL xcvr driver.
There's a few new drivers here and quite a lot of cleanup work from
Morimoto-san but generally this has been quite a quiet release,
resulting in a fairly small diffstat. Highlights include:
- Refactoring of the Kconfig menus to be hopefully more consistant and
easier to navigate.
- Refactoring of the DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers.
- Removal of the unused upstream weak paths DAPM functionality.
- Further work on the generic handling for SoundWire SDCA devices.
- Cleanups of our usage of the PM autosuspend functions, this pulls in
some PM core changes on a shared tag.
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI TAS5753.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiCG4gACgkQJNaLcl1U
h9DDLAgAg48dNlG1argnaoTmWQ8j5fVV2aCfzPL3+UxIj/Jy3HQGusUXuCqvxCnl
CeZ249oQMACSxwaBthFXoFoSiv9KkD+FbB+mw+BjJWnE77fP56Z+nqR2LE2xWRTU
F4gcGu5aeqxjFDtmWf9xEh27hgtIB63P98CkXGyJKxxvTtWCp/JQzkvRJRN3Hpuf
9lFQr7GSt3aaNOxyon9aOczAfMa/BWcfmL7BVesuXtWzTKVJiFJVTS1mhl/7NNVR
oZ1QLj8OdJOFWddyWwN8okZZ6omHdpdtnRWw/FOA0PiCALpBpXvd9FAuFfIA+FrU
5fCDfYgvkX1sz1csD1RaOs2nGAehxA==
=GR/0
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.17
There's a few new drivers here and quite a lot of cleanup work from
Morimoto-san but generally this has been quite a quiet release,
resulting in a fairly small diffstat. Highlights include:
- Refactoring of the Kconfig menus to be hopefully more consistant and
easier to navigate.
- Refactoring of the DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers.
- Removal of the unused upstream weak paths DAPM functionality.
- Further work on the generic handling for SoundWire SDCA devices.
- Cleanups of our usage of the PM autosuspend functions, this pulls in
some PM core changes on a shared tag.
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI TAS5753.
Many of the DisCo properties that specify Control values have an
additional variant that specifies a separate value for each Control
Number. Add support for these.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250718135432.1048566-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add TAS2770 support in TI's HDA driver. And add hda_chip_id for
more products. Distinguish DSP and non-DSP in firmware
loading function.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250723142423.38768-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a helper function that can be called from hw_params() in the DAI ops
to configure the SDCA Cluster, Clock and Usage controls. These setup the
channels, sample rate, and bit depths that will be used by the Terminal.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to extract the SoundWire hardware port number
from the SDCA DataPort Selector Control. Typically this would be
called from hw_params() and used to call sdw_stream_add_slave().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the core SDCA code simply creates a place holder available
channels from 1 to SDCA_MAX_CHANNEL_COUNT. Add a helper function
that will constrain the number of channels based on the actual
available SDCA Clusters in DisCo. Currently this code only handles
Input Terminal Entities as they directly specify the Cluster. More
work will be required later for Output Terminals which inherit their
Cluster. Typically this new helper would be called from the DAIs
startup callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a private data pointer that can be used to store context along
with the DAI. This will be useful to allow the SDCA class library to
store data separately from the CODEC driver itself.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC code for SDCA contains several helper functions that search for
controls/ranges/etc. As the code evolves these helpers are likely to be
useful to anything interacting with the stored DisCo data. Move the
helpers into sdca_function.c and export them so other modules can also
use them.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peng Fan <peng.fan@nxp.com>:
This patchset is a pick up of patch 1,2 from [1]. And I also collect
Linus's R-b for patch 2. After this patchset, there is only one user of
of_gpio.h left in sound driver(pxa2xx-ac97).
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
Patch 1 is to drop legacy platform data which in-tree no users are using it
Patch 2 is to convert to GPIO descriptors
Checking the DTS that use the device, all are using GPIOD_ACTIVE_LOW
polarity for reset-gpios, so all should work as expected with this patch.
[1] https://lore.kernel.org/all/20250408-asoc-gpio-v1-0-c0db9d3fd6e9@nxp.com/
There is no machine is using aic32x4_pdata as platform_data, so
remove the dead code.
Cc: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250710-asoc-gpio-1-v2-1-2233b272a1a6@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that all patch_ops usage have been converted to the new
hda_codec_ops probe, we can drop patch_ops from the hda_codec,
together with the calls of patch_ops callbacks.
The hda_codec_ops.free callback is removed as all have been replaced
with the new remove callback.
Also, correct comments mentioning "patch"; it's replaced with "codec
driver".
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-25-tiwai@suse.de
Until now, we use "patch_ops" embedded in hda_codec object for
defining the callbacks that are used in various places to manage
HD-audio codec. But from the device driver POV, this should have been
rather the driver ops, instead of the callbacks in the codec object.
This patch defines the driver ops for HD-audio codec driver as the
replacement. We reuse the same struct hda_codec_ops, and this is put
as hda_codec_driver.ops. When the driver->ops callbacks are defined,
they are called primarily instead of codec->patch_ops callbacks.
With converting to the driver ops, there is no need to pass the ugly
patch_ops handling in hda_device_id tables. That is, driver_data
field of hda_device_id becomes really optional and it can be used for
passing the codec-specific data (e.g. specifying a model).
The codec entries after the conversion should be with HDA_CODEC_ID()
and co, instead of the former HDA_CODEC_ENTRY().
Once after converting all codec drivers to use driver ops, we can get
rid of codec patch_ops.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-10-tiwai@suse.de
The get_wcaps() and co are used not only by HD-audio core but also
other driver code, hence it'd be better to put into the common header
instead of local.h.
OTOH, there are macros of the same name like get_wcaps() that are
still used in sound/pci/hda/* locally, and those conflict with each
other. So we need to rename get_wcaps() (to be moved from hda-core)
with the proper snd_hdac prefix for avoiding name conflicts, and
define in the common hdaudio.h.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-2-tiwai@suse.de
Because header defined randomly, it needs name definitions on top of
soc-dapm.h. it is not needed if definitions are implemented in correct
order.
This patch has big change from change-line point of view, but is
just reordering, nothing changed in meaning.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plekhit0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No one is using snd_soc_dapm_weak_routes(), let's remove it.
Because snd_soc_dapm_weak_routes() was removed, path->weak is not
needed either. Remove it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sejghitd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_nc_pin() was added in commit 5817b52a29 ("ALSA: ASoC: Allow
machine drivers to mark pins as not connected") at 2008.
It is identical to snd_soc_dapm_disable_pin[_unlocked](). It was expected
to be updated, but were enough as-is for this 17 years.
We might update these, but renaming function name by define is enough
for now. We can re-create these if needed in the future. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tt3whitj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Add a maintainers entry for SDCA, do a couple of small fixups for
previous chains, and then adding the beginnings of the SDCA IRQ
handling. This is based around a regmap IRQ chip and a few helper
functions that can be called from the client drivers to setup the
IRQs.
Add basic IRQ handlers for the function status and jack detection
interrupts.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a library supporting usage of SDCA interrupts, using regmap irq
framework. The library adds functions for parsing ACPI for
interrupt-related information, configuring irq chip and requesting
individual irqs. Calling code (SDCA function code) is expected to also
substitute the library's base irq handler for its own, appropriate
callback.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Zero is a valid SDCA IRQ interrupt position so add a special value to
indicate that the IRQ is not used.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the names a slightly better match for the specification and add
some constants for the values rather than hard coding.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
The series adds support for combined speaker components with one "spk:"
tag in the card->components string. This is a UCM request.
Currently the sdw machine driver uses different way to get the
component name from the DAI name for different codecs in the rtd_init
callback. It means that we need to rely on the rtd_init callback to get
the component name. Add an optional component string to the
asoc_sdw_dai_info struct allows the machine driver to get the component
name directly.
The commit adds the component names for the AMP dais for the preparation
to set card->components string for combined speaker configs.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250625140430.311865-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch supports to add a HID device for SDCA HIDE entity.
The codec driver could call 'hid_input_report' to report events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250616114929.855496-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for parsing the HIDE entity descriptor and HID descriptor/report
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250616114820.855401-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware will be able to only save and restore the context related to
library management.
This means that even without a full context save, the libraries do not
need to be re-loaded to the firmware after second or consecutive boots.
This is reported via the FW_READY notification, where BIT(15) indicates:
0 - the library restore is not done
1 - library restore is done
This bit is only valid if full context save is not enabled, full context
save is by definition saves and restores the library related book-keeping
as well.
Add a new flag to tell the platform code if the libraries have been
restored, no need to reload them after boot.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20250619105623.4546-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently only left and right channels are supported for each amp.
Support is needed for a center channel, using both left and right
channel audio.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612160029.848104-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
No one is using component->id.
One idea is we can re-use it as serial number for component.
But we have no usage, so far. Let's just remove it for now.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877c1suuna.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices. I think this takes the
record for the most number of patch series (30+) over the longest
period of time (2+ years) to get merged properly. Many props go to
Wesley Cheng for seeing this effort through, they took a major
out-of-tree hacked-up-monstrosity that was created by multiple
vendors for their specific devices, got it all merged into a
semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees. This feature offers major power savings on embedded
devices where a USB audio stream can continue to flow while the rest
of the system is sleeping, something that devices running on battery
power really care about. There are still some more small tweaks
left to be done here, and those patches are still out for review and
arguing among the different hardware companies, but this is a major
step forward and a great example of how to do upstream development
well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added for
the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaEKnpA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym3zQCgz+Oz3DHfLcYOX7evGI2PjI4GNMkAoJa6Kndw
h4YgL+8MeBpKuHCQvxy8
=KVAn
-----END PGP SIGNATURE-----
Merge tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
The changes in this release are quite large, mainly in drivers rather
than the core. This is partly due to cleanups that touch a lot of
drivers and partly due to several relatively large new drivers.
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices, further work is required for these to be
useful in an actual card.
- Conversion of quite a few drivers to newer GPIO APIs.
- More helpers and cleanups from Mormimoto-san.
- Support for a wider range of AVS platforms.
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32,
Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia
Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgvRsEACgkQJNaLcl1U
h9DInQf/SD/3ygLJOY3h7YMcY8ua39Jcu01cDtJ4F8Aezt2T+hTppxd/uUqPYiyM
UcS6B+0yzFbtpKrtdectPoYIBYBXcoH34tnDn0/Qj9yaYX9BzFV1j6meIPJA10Wv
CdCG35QKNamxL7PfCq/QxekWuS91TcRDZLzsX04lme5jm12q89/mWtenMIlAtRXH
JCaVp6CzGaXBMpTJYK3uQ9DwszqMnSLmkoPvXJQAr8ymOJ/emOMY9uKPF5nSYtEU
4T4jbIvt/stR5vsfgRUgOPuXquf2oupExgzOPdGWXWSGOg23QeiJcfeE+7OH1bAf
k551jztnqivFhY5Ad72iipiaPYhSzw==
=G6Xw
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.16
The changes in this release are quite large, mainly in drivers rather
than the core. This is partly due to cleanups that touch a lot of
drivers and partly due to several relatively large new drivers.
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices, further work is required for these to be
useful in an actual card.
- Conversion of quite a few drivers to newer GPIO APIs.
- More helpers and cleanups from Mormimoto-san.
- Support for a wider range of AVS platforms.
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32,
Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia
Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.
In commit d69d804845 ("driver core: have match() callback in struct
bus_type take a const *"), the match bus callback was changed to have
the driver be a const pointer. Unfortunately that const attribute was
thrown away when container_of() is called, which is not correct and was
not caught by the compiler due to how container_of() is implemented.
Fix this up by correctly preserving the const attribute of the driver
passed to the bus match function which requires the hdac_driver match
function to also take a const pointer for the driver structure.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Fixes: d69d804845 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052204-hyphen-thermal-3e72@gregkh
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Calibration data getting function for SPI and I2C HDA drivers are almost
same, which read the calibration data from UEFI. To put them into
tas2781_hda lib for code cleanup is more reasonable than to still keep
them in the codec driver. For tas2781 codec driver, there're two different
sources for calibrated data, one is from bin file, generated in factory
test, requested and read in codec driver side; the other is from user
space during device bootup.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250522014347.1163-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Add helper functions to add DAPM widgets, routes, ALSA controls,
and DAI drivers, these will be used to create SDCA function device
drivers.
This series should provide most of the core functionality needed to
get a device registered and have a working DAPM graph within the
device. There are some features that still need additional work, these
are marked with FIXMEs in the code. The two main things are SDCA
Clock Muxes (not used in our devices and needs some ASoC core work),
and better support for more complex SDCA volume control definitions
(our parts have fairly simple volumes, and SDCA has a large amount of
flexibility in how the volume control is specified).
The next steps in the process are to add helpers for the DAI ops
themselves, some IRQ handling, and firmware download. And finally we
should be able to actually add the SDCA class driver itself.
Use the previously parsed DisCo information from ACPI to create the DAI
drivers required to connect an SDCA Function into an ASoC soundcard.
Create DAI driver structures and populate the supported sample rates
and sample widths into them based on the Input/Output Terminal and any
attach Clock Source entities. More complex relationships with channels
etc. will be added later as constraints as part of the DAI startup.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the previously parsed DisCo information from ACPI to create the
ALSA controls required by an SDCA Function. This maps all User and
Application level SDCA Controls to ALSA controls. Typically controls
marked with those access levels are just volumes and mutes.
SDCA defines volume controls as an integer in 1/256ths of a dB and
then provides a mechanism to specify what values are valid (range
templates). Currently only a simple case of a single linear volume
range with a power of 2 step size is supported. This allows the code
to expose the volume control using a simple shift. This will need
expanded in the future, to support more complex ranges and probably
also some additional control types but this should be sufficient to
for a first pass.
For non-dataport terminal widgets also add a pin switch to allow
that endpoint to be turned on/off.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the previously parsed DisCo information from ACPI to create DAPM
widgets and routes representing a SDCA Function. For the most part SDCA
maps well to the DAPM abstractions.
The primary point of interest is the SDCA Power Domain Entities
(PDEs), which actually control the power status of the device. Whilst
these PDEs are the primary widgets the other parts of the SDCA graph
are added to maintain a consistency with the hardware abstract,
and allow routing to take effect. As for the PDEs themselves the
code currently only handle PS0 and PS3 (basically on and off),
the two intermediate power states are not commonly used and don't
map well to ASoC/DAPM.
Other minor points of slightly complexity include, the Group Entities
(GEs) these set the value of several other controls, typically
Selector Units (SUs) for enabling a cetain jack configuration. Multiple
SUs being controlled by a GE are easily modelled creating a single
control and sharing it among the controlled muxes.
SDCA also has a slight habit of having fully connected paths, relying
more on activating the PDEs to enable functionality. This doesn't
map quite so perfectly to DAPM which considers the path a reason to
power the PDE. Whilst in the current specification Mixer Units are
defined as fixed-function, in DAPM we create a virtual control for
each input (which defaults to connected). This allows paths to be
connected/disconnected, providing a more ASoC style approach to
managing the power. PIN_SWITCHs will also be added for non-dataport
terminal entities in a later patch along with the other ALSA controls,
providing greater flexibility in power management.
A top level helper sdca_asoc_populate_component() is exported that
counts and allocates everything, however, the intermediate counting and
population functions are also exported. This will allow end drivers to
do allocation and add custom handling, which is probably fairly likely
for the early SDCA devices.
Clock muxes are currently not fully supported, so some future work will
also be required there.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core currently supports pin switches for source/sink widgets, but
only at the card level. SDCA components specify the fabric at the
level of the individual components, to support this add helpers to
allow component level pin switches.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>:
This patchset adds support for sound card on Qualcomm QCS9100 and
QCS9075 boards.
Drop the I2C in one comment, for these registers are also used in SPI
driver; Move the macro definition of TASDEVICE_CMD_XXX from tas2781.h to
tas2781_fmwlib.c, because the macros are only referenced in only fwlib.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250518132451.707-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PCM OSS layer tries to clear the buffer with the silence data at
initialization (or reconfiguration) of a stream with the explicit call
of snd_pcm_format_set_silence() with runtime->dma_area. But this may
lead to a UAF because the accessed runtime->dma_area might be freed
concurrently, as it's performed outside the PCM ops.
For avoiding it, move the code into the PCM core and perform it inside
the buffer access lock, so that it won't be changed during the
operation.
Reported-by: syzbot+32d4647f551007595173@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/68164d8e.050a0220.11da1b.0019.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250516080817.20068-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Simon Trimmer <simont@opensource.cirrus.com>:
These two patches introduce a log message when provisioning the cs35l56
family of devices that uniquely identifies the firmware tuning.
The cs35l56 smart amplifier has some informational firmware controls
that are populated by a tuning bin file to unique values - logging these
during firmware load identifies the specific configuration being used on
that device instance.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/47762a5f1ce2b178ad863c6698296aea09b72e10.1747142267.git.simont@opensource.cirrus.com
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
We have below 2 functions, but these are very similar
(A) snd_soc_unregister_component_by_driver()
(B) snd_soc_unregister_component()
(A) void snd_soc_unregister_component_by_driver(...)
{
...
(a) mutex_lock(&client_mutex);
^ (X) component = snd_soc_lookup_component_nolocked(dev, component_driver->name);
| if (!component) ^^^^^^^^^^^^^^^^^^^^^^
| goto out;
(b)
| snd_soc_del_component_unlocked(component);
v
out:
(c) mutex_unlock(&client_mutex);
}
(B) void snd_soc_unregister_component_by_driver(...)
{
(a) mutex_lock(&client_mutex);
^ while (1) {
| (X) struct snd_soc_component *component = snd_soc_lookup_component_nolocked(dev, NULL);
| ^^^^
(b) if (!component)
| break;
|
| snd_soc_del_component_unlocked(component);
v }
(c) mutex_unlock(&client_mutex);
}
Both are calling lock (a), find component and remove it (b), and
unlock (c). The big diff is whether use driver name for lookup() or
not (X).
Merge these into snd_soc_unregister_component_by_driver() (B), and
snd_soc_unregister_component_by_driver() (A) can be macro.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h61qy2vn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
s/devince/device/
It's used only internally, so no any behavior changes.
Fixes: 37e0e14128 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250511141147.10246-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is no snd_soc_disconnect_sync() implementation, and no one is
using it. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jz6qpql7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_gus_use_dec(), snd_gus_use_inc() and snd_gf1_print_voice_registers()
last uses were removed in 2007 by
commit e5723b41ab ("[ALSA] Remove sequencer instrument layer")
Remove them.
While there, remove big #if 0 blocks next to the code being deleted.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250508000225.195766-1-linux@treblig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_stream_get_spbmaxfifo() was originally added in 2015
in commit ee8bc4df1b ("ALSA: hdac: Add support to enable SPIB for hdac
ext stream")
when it was originally called snd_hdac_ext_stream_set_spbmaxfifo,
it was renamed snd_hdac_ext_stream_get_spbmaxfifo shortly after
and was finally renamed to snd_hdac_stream_get_spbmaxfifo in 2022.
But it was never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250505011037.340592-1-linux@treblig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
"Acoustic Tuning" debugfs node is a bridge to the acoustic tuning tool
which can tune the chips' acoustic effect.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250507094616.210-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
CS35L63 is a Mono Class-D PC Smart Amplifier, with Speaker Protection
and Audio Enhancement Algorithms.
CS35L63 uses a similar control interface to CS35L56 so support for
it can be added into the CS35L56 driver.
CS35L63 only has SoundWire and I2C control interfaces.
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
SOF will load the function topologies by default. However, user may want
to use the monolithic topology. Add a flag amd a module parameter to
allow user specify the topology or not using function topologies.
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Fix a small bug that can cause the sof_sdw machine driver to fail probe
after the first time it has probed. Also do some minor tidy up on the
handling of the platform_component of the dai links.
Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>:
This patchset is separate from [1], and not merging changes in one
patch. So separate changes into three patches for each chip.
- sort headers
- Drop legacy platform support
- Convert to GPIO descriptors
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use devm_gpiod_get_optional to get GPIO descriptor with default
polarity GPIOD_OUT_LOW, set consumer name.
- Use gpiod_set_value_cansleep to configure output value.
I not have platforms to test, just do the patches with my best efforts,
and make build pass.
[1] https://lore.kernel.org/all/20250408-asoc-gpio-v1-0-c0db9d3fd6e9@nxp.com/
There is no in-tree user of "include/sound/cs42l52.h", so move
'struct cs42l52_platform_data ' to cs42l52.c and remove the header file.
And platform data is mostly for legacy platforms that create devices
non using device tree. So drop cs42l52.h to prepare using GPIOD API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-8-e9496db544c4@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no in-tree user of "include/sound/cs42l56.h", so move
'struct cs42l73_platform_data ' to cs42l73.c and remove the header file.
And platform data is mostly for legacy platforms that create devices
non using device tree. So drop cs42l73.h to prepare using GPIOD API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-5-e9496db544c4@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no in-tree user of "include/sound/cs42l56.h", so move
'struct cs42l56_platform_data' to cs42l56.c and remove the header file.
And platform data is mostly for platforms that create
devices non using device tree. CS42L56 is a discontinued product,
there is less possibility that new users will use legacy method
to create devices. So drop cs42l56.h to prepare using GPIOD API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-2-e9496db544c4@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SOF driver will load required function topologies dynamically. However,
we prefer using the monolithic topology. Add a flag to allow user not
using the function topologies.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250506113311.45487-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On CS35L63 the DIE_STS registers are populated by the Firmware from
OTP, so the driver can read these registers directly, rather than
obtaining them from OTP.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-6-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CS35L63 uses a similar control interface to CS35L56 so support for
it can be added into the CS35L56 driver.
New regmap configs have been added to support CS35L63.
CS35L63 only has SoundWire and I2C control interfaces.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-5-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Registers to set Mute, Volume and Posture are inside firmware,
which means they should be added to the list of registers set inside
firmware, in case they vary across Device or Revision.
These three registers are also used for controls, so additional
handling is required to be able to obtain and set the register inside
ALSA controls.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-4-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware based registers may be different addresses across different
device ids and revision ids. Create a structure to store and access
these addresses.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Philipp Stanner <phasta@kernel.org>:
A year ago we spent quite some work trying to get PCI into better shape.
Some pci_ functions can be sometimes managed with devres, which is
obviously bad. We want to provide an obvious API, where pci_ functions
are never, and pcim_ functions are always managed.
Thus, everyone enabling his device with pcim_enable_device() must be
ported to pcim_ functions. Porting all users will later enable us to
significantly simplify parts of the PCI subsystem. See here [1] for
details.
This patch series does that for sound.
Feel free to squash the commits as you see fit.
P.
[1] https://elixir.bootlin.com/linux/v6.14-rc4/source/drivers/pci/devres.c#L18
There is no point in passing num_platforms into
asoc_sdw_init_simple_dai_link(). Firstly, as a single pointer for the
component name is passed in only a single string can be passed and
secondly if it is a complex DAI with multiple platforms it would make
more sense to use asoc_sdw_init_dai_link().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250505141409.2614010-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_jack_set_parent() was added as part of 2008's
commit e76d8ceaaf ("ALSA: Add jack reporting API")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250502235219.1000429-6-linux@treblig.org
snd_device_get_state() last use was removed in 2022 by
commit 7e1afce586 ("ALSA: usb-audio: Inform the delayed registration more
properly")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250502235219.1000429-5-linux@treblig.org
snd_dmaengine_pcm_open_request_chan() last use was removed in 2022's
commit b401d1fd80 ("ASoC: pxa: remove unused board support")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250502235219.1000429-3-linux@treblig.org
The last use of snd_pcm_rate_range_to_bits() was removed in 2016 by
commit b6b6e4d670 ("ASoC: topology: Fix setting of stream rates, rate_min
and rate_max")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250502235219.1000429-2-linux@treblig.org
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We are using dummy component/dlc, but didn't have its check funciton.
This patch adds it.
A moderately large batch of fixes for v6.15, many driver specific
including cleanups for the enabling of the Cirrus KUnit tests and a fix
for a nasty crash on resume on AMD systems. We also have one core fix,
for an ordering issue between DAPM and DPCM which could leave things
incorrectly unpowered.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgTGBAACgkQJNaLcl1U
h9BHlgf/b22RCBkg82fhlZkXDRBgygiNmWBVX/TbVXM/diUl6x+4Kq9fSRNo3VRI
WPkF9KADvoulu143YXrVqbU8werfY+uUVYSTNJ6QSbIptx/r/1bhYCC5BofpXZ+a
fEB1a/yiVdw+T6bWjBPjbyQZqdO6PcCSH3ITYUSV+0hoHxQPMjQpr9RvekQG73Er
kg0b59sulspreRI2CqRV7pV3bj62gfUfnscaRARydLVXZXxUsCtyr72NYVnCeg2/
3UX7mljN88wj6fPTJEmfkSI8ntCcdAFXkqYKoTzPlDv2haHRgh7oBqNEkKPa7vrh
qqVL8yFBlra2V9q9m1FWnkX0kRIZKA==
=9DpM
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.15-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.15
A moderately large batch of fixes for v6.15, many driver specific
including cleanups for the enabling of the Cirrus KUnit tests and a fix
for a nasty crash on resume on AMD systems. We also have one core fix,
for an ordering issue between DAPM and DPCM which could leave things
incorrectly unpowered.
The volume control for cs35l56 speakers has a maximum gain of +12 dB.
However, for many use cases, this can cause distorted audio, depending
various factors, such as other signal-processing elements in the chain,
for example if the audio passes through a gain control before reaching
the amp or the signal path has been tuned for a particular maximum
gain in the amp.
In the case of systems which use the soc_sdw_* driver, audio will
likely be distorted in all cases above 0 dB, therefore add a volume
limit of 400, which is 0 dB maximum volume inside this driver.
The volume limit should be applied to both soundwire and soundwire
bridge configurations.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250430103134.24579-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most codes in tas2781_spi_fwlib.c are same as tas2781-fmwlib.c, mainly for
firmware parsing, only differece is the register reading, bit update and
book switching in i2c and spi. The main purpose of this patch is for code
cleaup and arrange the shared part for i2c and spi.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250429111055.567-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The conversion function from MIDI 1.0 to UMP packet contains an
internal buffer to keep the incoming MIDI bytes, and its size is 4, as
it was supposed to be the max size for a MIDI1 UMP packet data.
However, the implementation overlooked that SysEx is handled in a
different format, and it can be up to 6 bytes, as found in
do_convert_to_ump(). It leads eventually to a buffer overflow, and
may corrupt the memory when a longer SysEx message is received.
The fix is simply to extend the buffer size to 6 to fit with the SysEx
UMP message.
Fixes: 0b5288f5fe ("ALSA: ump: Add legacy raw MIDI support")
Reported-by: Argusee <vr@darknavy.com>
Link: https://patch.msgid.link/20250429124845.25128-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
formance low-power audio DSP with analog and
PDM digital inputs and support for low-power always-on voice-trigger
functionality.
This series adds the devicetree bindings and the ASoC codec driver.
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
A codec endpoint may not be used. We could check the present SDCA
functions to know if the endpoint is used or not. Skip the endpoint
which is not used. And load the topology dynamically for each endpoint.
With this feature, we don't need to use the quirk to determine the
existence of the optional codec DAIs.
Add a codec driver for the Cirrus Logic CS48L32 audio DSP.
The CS48L32 is a low-power audio DSP with microphone inputs for
"Always on Voice" (i.e. voice trigger) and voice command processing.
It has a programmable Halo Core DSP and a variety of power-efficient
fixed-function audio processors, with configurable digital mixing
and routing.
There are two I2S/TDM audio serial ports.
Four analogue inputs are available through IN1. These feed into a
2-channel ADC through an analogue mux. There is an ALSA control for
each IN1 ADC channel to select which analogue input to use.
A dedicated digital mic (DMIC) PDM input is available on IN2.
Two PDM outputs can feed DMIC inputs on another codec or a host DMIC/PDM
input.
An on-board regulator provides a power supply or bias voltage to
attached microphones. Three switchable MICBIAS outputs are fed from this
allowing only the microphone in use to be powered-up. There are DAPM
widgets for these outputs: MICBIAS1A, MICBIAS1B and MICBIAS1C. The machine
driver must create a DAPM route from the required MICBIAS1x widget to the
INn input widgets to make the MICBIAS switch on when the audio input is
powered-up. For example if the microphone feeding CS48L32 pin IN1LN_1 is
powered from MICBIAS1A, the machine driver must create the path:
(sink) IN1LN_1 <----- (source) MICBIAS1A
Co-developed-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Co-developed-by: Qi Zhou <qi.zhou@cirrus.com>
Signed-off-by: Qi Zhou <qi.zhou@cirrus.com>
Co-developed-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com>
Signed-off-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250415115016.505777-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the __counted_by() compiler attribute to the flexible array member
'data' to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250415090354.92211-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
We always use a single topology that contains all PCM devices belonging
to a machine configuration.
However, with SDCA, we want to be able to load function topologies based
on the supported device functions. This change is in preparation for
loading those function topologies.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create a USB BE component that will register a new USB port to the ASoC USB
framework. This will handle determination on if the requested audio
profile is supported by the USB device currently selected.
Check for if the PCM format is supported during the hw_params callback. If
the profile is not supported then the userspace ALSA entity will receive an
error, and can take further action.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-25-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB SND needs to know how the USB offload path is being routed. This would
allow for applications to open the corresponding sound card and pcm device
when it wants to take the audio offload path. This callback should return
the mapped indexes based on the USB SND device information.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-18-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Expose API for creation of a jack control for notifying of available
devices that are plugged in/discovered, and that support offloading. This
allows for control names to be standardized across implementations of USB
audio offloading.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-17-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper to check if a particular PCM format is supported by the
USB audio device connected. If the USB audio device does not have an
audio profile which can support the requested format, then notify the USB
backend.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-16-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some platforms may have support for offloading USB audio devices to a
dedicated audio DSP. Introduce a set of APIs that allow for management of
USB sound card and PCM devices enumerated by the USB SND class driver.
This allows for the ASoC components to be aware of what USB devices are
available for offloading.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-15-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an USB jack type, in order to support notifying of a valid USB audio
device. Since USB audio devices can have a slew of different
configurations that reach beyond the basic headset and headphone use cases,
classify these devices differently.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-8-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The patchset is fairly straightforward - add support for Automotive
platforms based on new DSP architecture, Frisco Lake (FCL), a
PantherLake (PTL)-based platform is an example of. The cAVS
architecture which all Intel AudioDSP followed for years ends with
RaptorLake familty. Like all the major updates, this one received new
name too - Audio Context Engine (ACE).
While the range of improvements and changes on the firmware/hardware
side is large, software survives this evolution without need of any
major refactoring. Additional hardware changes brought with LunarLake
(LNL, ACE 2.0) call for update in PCM-area. The GPDMAs previously
utilized for non-HDAudio transfer types are no longer there, everything
is running through HDAudio LINK on the Back-End side now.
In terms of code, the mtl.c file, provided with patch 05 'ASoC: Intel:
avs: PTL-based platforms support' hosts largest number of new handlers -
new IRQ and INT control and DSP-cores management. Combined with lnl.c
and ptl.c which layer the architecture changes done over ACE
generations, provide support for PTL-based platforms e.g.: FCL.
The inheritance in summary:
mtl.c <- lnl.c <- ptl.c
The functional update to HDAudio library is there to help avs-driver
read certain capabilities directly from the hardware. Once the pointer
to LINK is obtained, there is no need to call AudioDSP firmware to get
the caps.
Starting with LunarLake (LNL) and onward, some hardware capabilities are
visible to the sound driver directly. At the same time, these may no
longer be visible to the AudioDSP firmware. Update resource allocation
function to rely on the registers when possible.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Link: https://patch.msgid.link/20250407112352.3720779-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Starting with LNL platform, Intel HDAudio Links carry IDs specifying
non-HDAudio transfer type they help facilitate e.g.: 0xC0 for I2S as
defined by AZX_REG_ML_LEPTR_ID_INTEL_SSP.
The mechanism accounts for LEPTR register as it is Reserved if
LCAP.ALT for given Link equals 0.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Link: https://patch.msgid.link/20250407112352.3720779-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit e894efef9a ("ASoC: core: add support to card rebind")
there is a support for card rebind. The support is only partial though.
Let's consider the following scenarios both of which aim to enumerate a
sound card:
1)
snd_soc_add_component(comp1);
(...)
snd_soc_register_card(card1);
2)
snd_soc_register_card(card1);
(...)
snd_soc_add_component(comp1);
For the sake of simplicity, let comp1 be the last dependency needed for
the card1 to enumerate.
Case 1) will end up succeeding whereas 2) is a certain fail -
snd_soc_bind_card() does not honor unbind_card_list so even a non-fatal
return code of EPROBE_DEFER will cause the card to collapse. Given the
typical usecase of platform_device serving as a card->dev and its
probe() ending with:
int carddev_probe(struct platform_device *pdev)
{
(...)
return devm_snd_soc_register_card(dev, card);
}
failure to register card triggers device_unbind_cleanup() -
really_probe() in dd.c.
To allow for card registration to be deferred while being friendly
towards existing users of devm_snd_soc_register_card(), add new
card->devres_dev field, and devm_xxx() variants for card registration:
devm_snd_soc_register_deferrable_card() (external)
devm_snd_soc_bind_card() (internal)
In essence, if requested, devm_snd_soc_bind_card() replaces
snd_soc_bind_card(). The rebind procedure takes care of destroying
old devres before attempting the new bind. This makes sure nothing is
left hanging if binding fails and card becomes unbound but is still
registered to the ASoC framework.
To allow snd_soc_bind_card() to be reused by the deferrable friends,
move 'client_mutex' locking to the function's callers and select between
devm_xxx and non-devm_xxx variants of snd_soc_bind_card() based on
card->devres_dev.
On top of the feature, the refactoring brings two benefits:
a) single lock/unlock of 'client_mutex' in snd_soc_add_component()
instead of ambiguous unlock and immediate lock in
snd_soc_try_rebind_card()
b) all unbind_card_list manipulations done under 'client_mutex'
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250404101622.3673850-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Support for SoundWire Bulk Register Access (BRA) protocol in core
along with Intel driver support and ASoC bits required.
- AMD driver updates and support for ACP 7.0 and 7.1 platforms
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmfqPDQACgkQfBQHDyUj
g0fkMhAAo5kIXK3etgyxkeGuMxY9ufJB495qkwkjN4451AhlsUXkalrUd/8XUyhU
sO/vBlc0ib8g+5PV+itHLunqWjYVC73IZA/BYZYEwgyPNZTY+jEchov7dK8Ijyx4
S45NBZjUqxStiYmdMQ1xq4BgGPdQhc7mHd206m5L+9x8QtoOCoAT5gw0zYkjWLgY
xw5xNPlEPeFISnrxdkm+LNn2d/OgTaq1rpWrD23rwTJijOatlJ/gJ1+ga05BV6ja
ymDRJRHdTnyzkjV+SsUEY+O3XfaVgDo9AORzWMqe0TJwE/NKAhq+1DvcXKV3avVY
AZMbFH3Gj7UL1oQF3r1hbpjzSKuTzB9n7h/iaJqg1XRH+sbnr/0jr/jYwgEucQ1z
Pcv6XFb0cxyxdVf5ss6NFAsfGfeggJBrQ9lvoi4EWLPaA2whCFpVKNOU0m4UkEFF
ZZN2hGDykTK84Q3jOHepKIr1/gYcBJo0iO5q8Urb/5BayioZmBmFgncEI6Hw6exU
FujEumJMS21ZIV+LYDNOb7nJpPv/dcNSotT3M8u1W87I+dgB+8h6Y4lfmLrFIb2p
5YkXH9WbRG49XGGVWRr7rRCIMpKdez0d9gnd7lNf0dGgTfpws+4hU9iDYQYatL/5
z0XXfEajfPPy2tlRAkfO8xUu3k068EhZ/Q84y9inX76jC/kfoxU=
=fe9N
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Support for SoundWire Bulk Register Access (BRA) protocol in core
along with Intel driver support and ASoC bits required
- AMD driver updates and support for ACP 7.0 and 7.1 platforms
* tag 'soundwire-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (28 commits)
soundwire: take in count the bandwidth of a prepared stream
ASoC: rt711-sdca: add DP0 support
soundwire: debugfs: add interface for BPT/BRA transfers
ASoC: SOF: Intel: hda-sdw-bpt: add CHAIN_DMA support
soundwire: intel_ace2x: add BPT send_async/wait callbacks
soundwire: intel: add BPT context definition
ASoC: SOF: Intel: hda-sdw-bpt: add helpers for SoundWire BPT DMA
soundwire: intel_auxdevice: add indirection for BPT send_async/wait
soundwire: cadence: add BTP/BRA helpers to format data
soundwire: bus: add bpt_stream pointer
soundwire: bus: add send_async/wait APIs for BPT protocol
soundwire: stream: reuse existing code for BPT stream
soundwire: stream: special-case the bus compute_params() routine
soundwire: stream: extend sdw_alloc_stream() to take 'type' parameter
soundwire: extend sdw_stream_type to BPT
soundwire: cadence: add BTP support for DP0
Documentation: driver: add SoundWire BRA description
soundwire: amd: change the log level for command response log
soundwire: slave: fix an OF node reference leak in soundwire slave device
soundwire: Use str_enable_disable-like helpers
...
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do
firmware updates in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs
-----BEGIN PGP SIGNATURE-----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=oK/N
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
This is a very big release due to a combination of some big new work,
mainly new drivers and generic SoundWire support, and some wide ranging
cleanup work that made small changes to a lot of drivers.
- Morimoto-san has completed the conversion to use modern terminology
for the clocking configuration, and several other cleanups with
narrower impact.
- All the power management operation configuration was updated to use
current idioms by Takashi Iwai.
- Clarification of the control operations from Charles Keepax.
- Prepartory work for more generic SoundWire SCDA controls from Charles
Keepax.
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95, nVidia
Tegra interconnects, Rockchip RK3588 S/PDIF, Texas Instruments
SN012776 and TAS5770L, and Wolfson WM8904 DMICs,
Some changes from the tip tree adding APIs needed by the AMD code are
included, these were unfortunately rebased in the tip tree after being
pulled in. There's also some regmap changes supporting the SCDA work
and some devres refactoring that was pulled in to support other changes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmfhZEUACgkQJNaLcl1U
h9DQjgf9FxqmX7qAbT3tV06lX6UJ79KtCGquvVpToxP3nMFa05h/HSJlQAnqEFkL
AUdAr/bfH6noDIqL08j+DMHs85lz6fP06PubCmQCHEk+yAEPOZ19OUsTKbhdXcG2
GTObvLEjnz8MDnUW99SwoB52y3DX/7F09uhcbv+xiLIZo0EmQOcTsLKx79XwuzgU
q52mQBXYi7CDhVTlnITeapcLj7G+6r2m7zLsQRWa897bKp/nRVq08GhWu0SHBNtP
m/RwBvwPZEgCDxH+aHOWvc6S7yQpotC9EIvTUchxFGkcHh9OKoLUoWLH7p+d99B2
ydVWgOz72GwRhAjp9FHH7X49A5UMmg==
=xZD3
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.15
This is a very big release due to a combination of some big new work,
mainly new drivers and generic SoundWire support, and some wide ranging
cleanup work that made small changes to a lot of drivers.
- Morimoto-san has completed the conversion to use modern terminology
for the clocking configuration, and several other cleanups with
narrower impact.
- All the power management operation configuration was updated to use
current idioms by Takashi Iwai.
- Clarification of the control operations from Charles Keepax.
- Prepartory work for more generic SoundWire SCDA controls from Charles
Keepax.
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95, nVidia
Tegra interconnects, Rockchip RK3588 S/PDIF, Texas Instruments
SN012776 and TAS5770L, and Wolfson WM8904 DMICs,
Some changes from the tip tree adding APIs needed by the AMD code are
included, these were unfortunately rebased in the tip tree after being
pulled in. There's also some regmap changes supporting the SCDA work
and some devres refactoring that was pulled in to support other changes.
Merge series from Francesco Dolcini <francesco@dolcini.it>:
This patch series adds DMIC and DRC support to the WM8904 driver, a new
of_ helper is added to simplify the driver code.
DRC functionality is added in the same patch series to provide the
necessary dynamic range control to make DMIC support useful.
The WM8904 supports digital microphones on two of its inputs:
IN1L/DMICDAT1 and IN1R/DMICDAT2. These two inputs can either be
connected to an ADC or to the DMIC system. There is an ADC for each
line, and only one DMIC block. This DMIC block is either connected to
DMICDAT1 or to DMICDAT2. One DMIC data line supports two digital
microphones via time multiplexing.
The pin's functionality is decided during hardware design (IN1L vs
DMICDAT1 and IN1R vs DMICDAT2). This is reflected in the Device Tree.
If one line is analog and one is DMIC, we need to be able to switch
between ADC and DMIC at runtime. The DMIC source is known from the
Device Tree. If both are DMIC inputs, we need to be able to switch the
DMIC source. There is no need to switch between ADC and DMIC at runtime.
Therefore, kcontrols are dynamically added by the driver depending on
its Device Tree configuration.
This is a heavy rework of a previous patch series provided by Alifer
Moraes and Pierluigi Passaro,
https://lore.kernel.org/lkml/20220307141041.27538-1-alifer.m@variscite.com.
Read in optional codec-specific properties from the device tree.
The platform_data structure is not populated when using device trees.
This change parses optional dts properties to populate it.
- wlf,in1l-as-dmicdat1
- wlf,in1r-as-dmicdat2
- wlf,gpio-cfg
- wlf,micbias-cfg
- wlf,drc-cfg-regs
- wlf,drc-cfg-names
- wlf,retune-mobile-cfg-regs
- wlf,retune-mobile-cfg-names
- wlf,retune-mobile-cfg-hz
Datasheet: https://statics.cirrus.com/pubs/proDatasheet/WM8904_Rev4.1.pdf
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250319142059.46692-5-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
With the addition of the soc_mixer_ctl_to_reg() helper it is now very
clear that the only difference between snd_soc_put_volsw() and
snd_soc_put_volsw_range() is that the former supports double controls
with both values in the same register. As such we can combine both
functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the addition of the soc_mixer_reg_to_ctl() helper it is now very
clear that the only difference between snd_soc_get_volsw() and
snd_soc_get_volsw_range() is that the former supports double controls
with both values in the same register. As such we can combine both
functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only difference between snd_soc_info_volsw() and
snd_soc_info_volsw_range() is that the later will not force a 2
value control to be of type integer if the name ends in "Volume".
The kernel currently contains no users of snd_soc_info_volsw_range()
that would return a boolean control with this code, so the risk is
quite low and it seems appropriate that it should contain volume
control detection. So remove snd_soc_info_volsw_range() and point its
users at snd_soc_info_volsw().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For calibration, basic version does not contain any calibration addresses,
it depends on calibration tool to convey the addresses to the driver.
Since Alpha and Beta firmware, all the calibration addresses are saved
into the firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313093238.1184-1-shenghao-ding@ti.com
Back-merge of 6.14 devel branch for further developments of TAS
codecsBack-merge of 6.14 devel branch for further developments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for parsing the Group Entity properties from DisCo/ACPI.
Group Entities allow control of several other Entities, typically
Selector Units, from a single control.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SDCA Ranges are two dimensional arrays of data associated with controls,
add a helper to provide an x,y access mechanism to the data and a helper
to locate a specific value inside a range.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SDCA Controls come in a variety of data formats, to simplify later
parsing work out this data type as the control is parsed and stash it
for later use.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmfOKBUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1aQH/iC+Oyij4VxAjBek
BOXIT/p6CwlIXb8ObiWWcRjDPizlcxb3RaV8J2RO+IqaQ2wltxpFANq2G7Re2FPm
SNcEpIURAOVcxHGedcfFA91srO5F4FzNTO8LVp7MIbcgMYy3pdk+dbZmi6A691R+
t9pb74m+MAnF1o/MUx7pUlhAT/4ymuuR0F7WCSg4h0Xwe5m0nlJY89kJBC7PCjyd
n3mdhsz3rDSLmt/z/T7HGD89r8sYSvm9cOKtL3ELgGTrm7boQV8ii9Y9w04DI8PQ
JmIernugcCxmhH36mVUAHgJf2+/T388xFUh/D5+skeUOUZpaJZG866rnb32WpsHc
eWLFUeg=
=Wypt
-----END PGP SIGNATURE-----
Backmerge tag 'v6.14-rc6' into drm-next
This is a backmerge from Linux 6.14-rc6, needed for the nova PR.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add SoundWire BPT DMA helpers as a separate module to avoid circular
dependencies.
For now this assumes no link DMA, only coupled mode.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New register has been introduced with PTL in the vendor specific SHIM
registers, outside of the IPs itself for microphone privacy status handling.
Via the PVCCS register the current microphone privacy status can be checked
and the interrupt generation on status change can be enabled/disabled.
The status change interrupt is routed to the owner of the interface
(DSP/host).
The PVCCS is provided for each sublink under the IP to make it possible to
control the interrupt generation per sublink.
On status change the MDSTSCHG bit needs to be cleared for all sublink of
the interface to be able to detect future changes in privacy.
The status bit (MDSTS) is volatile in all PVCCS register, it reflects the
current state of the GPIO signal.
Microphone privacy is a hardware feature (if enabled and configured that
way), the host has only passive, monitoring role.
The added functions are generic to be future proof if the mic privacy
support is extended beyond Soundwire and DMIC links.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20250307112816.1495-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACE3 (Panther Lake) introduced support for microphone privacy feature which
can - in hardware - mute incoming audio data based on a state of a physical
switch.
The change in the privacy state is delivered through interface IP blocks
and can only be handled by the link owner.
In Intel platforms Soundwire is for example host owned, so the interrupt
can only be handled by the host.
Since the input stream is going to be muted by hardware, the host needs to
send a message to firmware about the change in privacy so it can execute a
fade out/in to enhance user experience.
The support for microphone privacy can be queried from the HW_CONFIG data
under the INTEL_MIC_PRIVACY_CAP tuple. This is Intel specific data, the
core will pass it to platform code if the intel_configure_mic_privacy()
callback is provided.
Platform code can call sof_ipc4_mic_privacy_state_change() to send the IPC
message to the firmware on state change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20250307112816.1495-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 9bdd10d57a ("ASoC: ops: Shift tested values in
snd_soc_put_volsw() by +min"), and makes some additional related
updates.
There are two ways the platform_max could be interpreted; the maximum
register value, or the maximum value the control can be set to. The
patch moved from treating the value as a control value to a register
one. When the patch was applied it was technically correct as
snd_soc_limit_volume() also used the register interpretation. However,
even then most of the other usages treated platform_max as a
control value, and snd_soc_limit_volume() has since been updated to
also do so in commit fb9ad24485 ("ASoC: ops: add correct range
check for limiting volume"). That patch however, missed updating
snd_soc_put_volsw() back to the control interpretation, and fixing
snd_soc_info_volsw_range(). The control interpretation makes more
sense as limiting is typically done from the machine driver, so it is
appropriate to use the customer facing representation rather than the
internal codec representation. Update all the code to consistently use
this interpretation of platform_max.
Finally, also add some comments to the soc_mixer_control struct to
hopefully avoid further patches switching between the two approaches.
Fixes: fb9ad24485 ("ASoC: ops: add correct range check for limiting volume")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250228151456.3703342-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Re-implement SOC_DOUBLE_VALUE() in terms of SOC_DOUBLE_S_VALUE().
SOC_DOUBLE_S_VALUE() already had a minimum value so add this to
SOC_DOUBLE_VALUE as well, this allows replacement of several hard coded
value entries. Likewise update SOC_SINGLE_VALUE to match, which allows
replacement of even more hard coded values.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250304140500.976127-14-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Tidy up the ASoC control value macros. Fix some drivers that should be
using core macros that aren't, combine the existing core macros to be
a little more consistent in style, and update the core macros to use
each other where possible.
PC speaker works well on this platform in BIOS and in Linux until sound
card drivers are loaded. Then it stops working.
There seems to be a beep generator node at 0x1a in this CODEC
(ALC269_TYPE_ALC215) but it seems to be only connected to capture mixers
at nodes 0x22 and 0x23.
If I unmute the mixer input for 0x1a at node 0x23 and start recording
from its "ALC285 Analog" capture device I can clearly hear beeps in that
recording.
So the beep generator is indeed working properly, however I wasn't able to
figure out any way to connect it to speakers.
However, the bits in the "Passthrough Control" register (0x36) seems to
work at least partially: by zeroing "B" and "h" and setting "S" I can at
least make the PIT PC speaker output appear either in this laptop speakers
or headphones (depending on whether they are connected or not).
There are some caveats, however:
* If the CODEC gets runtime-suspended the beeps stop so it needs HDA beep
device for keeping it awake during beeping.
* If the beep generator node is generating any beep the PC beep passthrough
seems to be temporarily inhibited, so the HDA beep device has to be
prevented from using the actual beep generator node - but the beep device
is still necessary due to the previous point.
* In contrast with other platforms here beep amplification has to be
disabled otherwise the beeps output are WAY louder than they were on pure
BIOS setup.
Unless someone (from Realtek probably) knows how to make the beep generator
node output appear in speakers / headphones using PC beep passthrough seems
to be the only way to make PC speaker beeping actually work on this
platform.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: kailang@realtek.com
Link: https://patch.msgid.link/7461f695b4daed80f2fc4b1463ead47f04f9ad05.1739741254.git.mail@maciej.szmigiero.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Re-implement SOC_DOUBLE_R_VALUE() in terms of SOC_DOUBLE_R_S_VALUE().
SOC_DOUBLE_R_S_VALUE() already had a minimum value so add this to
SOC_DOUBLE_R_VALUE() as well, which makes SOC_DOUBLE_R_RANGE_VALUE()
redundant, so its usage is replaced.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250303171424.444556-13-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the DAPM kcontrol creation macros to use the ASoC macros where a
helpful version exists. One minor fixup is required in adau17x1, the
compiler doesn't like the extra level of macro indirection coupled with
the inline struct definition. Make the struct definition explicit.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250303171424.444556-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The concept of an SDCA default value differs slightly from the regmap
usage of the term. An SDCA default is a value that is parsed from DisCo
and then written out to the hardware if no user value has superceded
it. Add a helper function that will iterate through all the SDCA
Controls and write out any default values. After these have been written
out once they will exist in the cache and that will take care of any
user values superceeding them. The code here also writes out any
Controls with a fixed value as there is only one available value for
these Controls there is no point in allowing the user to select them,
simply treat them similarly to a default.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250217140159.2288784-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helpers to parse the DisCo Constant values from ACPI and populate an
array of reg_defaults with these. This will allow drivers to access
these ACPI specified values through the same interface as other
registers that are physically present on the device, using the regmap
cache.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250217140159.2288784-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper functions that SDCA drivers can use to calculate the
properties of SDCA Controls (registers) specified through DisCo.
Most of these are fairly obvious from the SDCA Access Modes.
DisCo Constants, values which are specified in the ACPI rather than on
the device, are handled as unreadable and unwritable registers. The
intention is these will be populated in the register defaults table
allowing drivers to read them normally. This means the drivers can be
agnostic as to which values are DisCo Constants.
Finally, support for SDCA Dual Ranked Controls is currently limited
here, at the moment the current value will be used directly. Writing
the current value directly is valid as per the specification
although the synchronicity of updates across multiple registers is
lost. Support for this will probably need to be added later. But its a
fairly hard problem and doesn't need to be solved immediately.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250217140159.2288784-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do some clean up for some define in header file.
Like change lower case in value, up case in define,
space add in recommends, change date of files and add author.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250226144328.11645-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When SPI is used for control, the driver must hold the SPI bus lock
while issuing the sequence of writes to perform a soft reset.
>From the time the driver writes the SYSTEM_RESET command until the
driver does a write to terminate the reset, there must not be any
activity on the SPI bus lines. If there is any SPI activity during the
soft-reset, another soft-reset will be triggered. The state of the SPI
chip select is irrelevant.
A repeated soft-reset does not in itself cause any problems, and it is
not an infinite loop. The problem is a race between these resets and
the driver polling for boot completion. There is a time window between
soft resets where the driver could read HALO_STATE as 2 (fully booted)
while the chip is actually soft-resetting. Although this window is
small, it is long enough that it is possible to hit it in normal
operation.
To prevent this race and ensure the chip really is fully booted, the
driver calls spi_bus_lock() to prevent other activity while resetting.
It then issues the SYSTEM_RESET mailbox command. After allowing
sufficient time for reset to take effect, the driver issues a PING
mailbox command, which will force completion of the full soft-reset
sequence. The SPI bus lock can then be released. The mailbox is
checked for any boot or wakeup response from the firmware, before the
value in HALO_STATE will be trusted.
This does not affect SoundWire or I2C control.
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250225131843.113752-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To provide minimal support for multi-channel kcontrols i.e.: more than
stereo configuration, store the number of channels specified within the
SectionControlMixer. The field is part of the topology standard,
currently skipped by the ASoC core.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250217102115.3539427-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_process_paths() will call dpcm_add_paths() (A) or
dpcm_prune_paths() (B)
dpcm_process_paths(..., new)
{
if (new)
(A) return dpcm_add_paths(...);
else
(B) return dpcm_prune_paths(...);
}
but the user who need to call dpcm_prune_paths() (B) is only
soc_dpcm_fe_runtime_update(), all other user want to call is
dpcm_add_paths() (A). We don't need to have confusing
dpcm_process_paths(). Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jz9vyjyu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card :: update is used only for passing parameters to
dapm_widget_update() like below.
card->update = update;
ret = soc_dapm_xxx(card, ...);
card->update = NULL;
Let's passing it via function parameter and remove update from
snd_soc_card.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldubyjz9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No one uses dpcm_dapm_stream_event() return value, and it always
return 0. Let's makes it void.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87seojyk6m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core.c only calls snd_soc_set_dmi_name(), so we don't need to have
EXPORT_SYMBOL_GPL() for it. Let's makes it local function.
No one uses *flavour parameter, let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7tfyk7b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for parsing the Power Domain Entity properties from
DisCo/ACPI.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for parsing the Clock Source Entity properties from
DisCo/ACPI.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for parsing the Input/Output Terminal Entity properties from
DisCo/ACPI.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Within SDCA collections of Channels are referred to as Clusters, each
Channel within a Cluster can have various properties attached to it.
For example a stereo audio stream, would have a Cluster with 2 Channels
one marked as left and the other as right. Various Clusters are
specified in DisCo/ACPI and controls then allow the class driver to
select between these channel configurations. Add support for parsing
these Cluster definitions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DisCo/SDCA contains small buffers of data that hold ranges of valid
values for the various SDCA Controls. Add support for parsing these
from ACPI.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each SDCA Entity will contain a number of Controls, these are
basically equivalent to registers. Although a single Control will only
ever contain a single field. Some of these would map directly to ALSA
controls once more of the SDCA class driver is implemented. These
controls are parsed out of the DisCo ACPI tables.
One small todo here is that each Control can have multiple
sub-entries (Control Numbers), these are typically used to represent
channels. Whilst support is present for these, currently the
ACPI properties that would allow differing defaults for each channel
are not parsed. But there is nothing here that should prevent that
being added in the future.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Within SDCA there is a special Entity called Entity 0 which is used
to hold Function level controls. Whilst Entity 0 isn't a full SDCA
Entity, it is helpful to add an sdca_entity structure for it. This
will allow it to be treated identically in the code that handles
SDCA Controls.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each SDCA Function may contain a table of register writes that should be
written out before the Function is used. Add code to parse this table
from the DisCo tables in ACPI.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to parse all the Function and Entity
information from ACPI. In SDCA each device may have several Functions
and each corresponds to a specific audio capability such as say
amplifier playback or microphone capture. Each Function then contains
a number of Entities that represent individual parts of the audio
signal chain and are linked together in a graph similar to DAPM.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix up some variable/struct member naming, add some missing kerneldoc
and fix some minor formatting/whitespace issues.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Each ASoC framwark is using own snd_xxx_ret() function, but we can share
these. This patch-set adds new snd_soc_ret() and use it.
checkpatch indicates that ENOTSUPP is not a SUSV4 error code, prefer to
use EOPNOTSUPP. So this patch-set adds it, but not remove existing ENOTSUPP.
Link: https://lore.kernel.org/r/8734gvsg5i.wl-kuninori.morimoto.gx@renesas.com
Each soc-xxx.c is using own snd_xxx_ret(), but we want to share it.
Let's add common snd_soc_ret() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87frkt2qlx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The symbol provider (sound/soc/soc-dapm.c) and the symbol consumer
(sound/soc/soc-core.c) belong to the same module, snd-soc-core.ko.
There is no need to export it.
I deleted the comment, as other modules cannot use it any more.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patch.msgid.link/20250205165310.3466254-1-masahiroy@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the hdmi-codec driver registers all the formats that are
allowed on the I2S bus. Add i2s_formats field to codec data, to allow
the hdmi codec client to refine the list of the audio I2S formats
actually supported.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108170356.413063-3-olivier.moysan@foss.st.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
* Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI 2.0
- compress-offload API extensions for ASRC support
* ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
* HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual
-----BEGIN PGP SIGNATURE-----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=IBfz
-----END PGP SIGNATURE-----
Merge tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI
2.0
- compress-offload API extensions for ASRC support
ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual"
* tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (235 commits)
ALSA: hda: tas2781-spi: Fix bogus error handling in tas2781_hda_spi_probe()
ALSA: hda: tas2781-spi: Fix error code in tas2781_read_acpi()
ALSA: hda: tas2781-spi: Delete some dead code
ALSA: usb: fcp: Fix return code from poll ops
ALSA: usb: fcp: Fix incorrect resp->opcode retrieval
ALSA: usb: fcp: Fix meter_levels type to __le32
ALSA: hda/realtek: Enable Mute LED on HP Laptop 14s-fq1xxx
ALSA: hda: tas2781-spi: Fix -Wsometimes-uninitialized in tasdevice_spi_switch_book()
ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions
ALSA: hda: tas2781-spi: select CRC32 instead of CRC32_SARWATE
ALSA: usb: fcp: Fix hwdep read ops types
ALSA: scarlett2: Add device_setup option to use FCP driver
ALSA: FCP: Add Focusrite Control Protocol driver
ALSA: hda/tas2781: Add tas2781 hda SPI driver
ALSA: hda/realtek - Fixed headphone distorted sound on Acer Aspire A115-31 laptop
ASoC: xilinx: xlnx_spdif: Simpify using devm_clk_get_enabled()
ALSA: hda: Support for Ideapad hotkey mute LEDs
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83JX, 83MC and 83NM
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83LC
ASoC: dapm: add support for preparing streams
...
There's one big bit of work this time around, the addition of support for
a greater range of MBQ access sizes to SoundWire devices together with
support for deferred read/write. The MBQ register maps generally have
variable register sizes, the variable regiseter size support allows them
to be handled much more naturally within regmap with less open coding in
drivers. The deferred read/write support avoids spurious errors when
devices make use of a bus feature allowing them to indicate they're
busy. These changes pull in a supporting SoundWire change, and there's
an ASoC change building off the new code.
The remainder of the changes are code cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeOXxIACgkQJNaLcl1U
h9Bktwf/ZG6r01FNIw7PTDFQoZ2YipaFffqyJZco7zj2kyK1SqPt9jRQuPD5K8CE
gXwxhIDu/Z7XXhTBOQ42shtOAyhw6FQDXdfULYvVl0kZ6JIUtz/J7JCuh3v/UBMo
PWvFCIutDsgte0ru7jdQCTxgGgc39sobEQQOyznlNP+If7+aRpWW6B95YqakTzCc
zDy8aDE4YxpFy6Wgg+t4xuO1KGdltHBoNFgtUNuaQtfkQP38JlMo9Ma/BEVu8INK
WlGYPjo3eo/oRCohN+MByq15qvbVheAFg0B9h3mNcTOGFGhvNLBkqc4DE85UBk6g
JH/QY1LEqTqHKEpi3oRAgwUUgy3Tog==
=6vTg
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"There's one big bit of work this time around, the addition of support
for a greater range of MBQ access sizes to SoundWire devices together
with support for deferred read/write.
The MBQ register maps generally have variable register sizes, the
variable regiseter size support allows them to be handled much more
naturally within regmap with less open coding in drivers.
The deferred read/write support avoids spurious errors when devices
make use of a bus feature allowing them to indicate they're busy.
These changes pull in a supporting SoundWire change, and there's an
ASoC change building off the new code.
The remainder of the changes are code cleanups"
* tag 'regmap-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Add support for SDCA deferred controls
regmap: sdw-mbq: Add support for further MBQ register sizes
ASoC: SDCA: Update list of entity_0 controls
soundwire: SDCA: Add additional SDCA address macros
regmap: regmap_multi_reg_read(): make register list const
regmap: cache: rbtree: use krealloc_array() to replace krealloc()
regmap: cache: mapple: use kmalloc_array() to replace kmalloc()
regmap: place foo / 8 and foo % 8 closer to each other
regmap: Use BITS_TO_BYTES()
regmap: cache: Use BITS_TO_BYTES()
This was quite a quiet release for what I imagine are holiday related
reasons, the diffstat is dominated by some Cirrus Logic Kunit tests.
There's the usual mix of small improvements and fixes, plus a few new
drivers and features. The diffstat includes some DRM changes due to
work on HDMI audio.
- Allow clocking on each DAI in an audio graph card to be configured
separately.
- Improved power management for Renesas RZ-SSI.
- KUnit testing for the Cirrus DSP framework.
- Memory to meory operation support for Freescale/NXP platforms.
- Support for pause operations in SOF.
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeOX4sACgkQJNaLcl1U
h9BFQAf/Q4OkXtVsoNMxz0gqOE9nEJXII2pbogssE19cVMF38JgONC1qqIHag+Gj
FR/HBw+WRmdQQHk+tgIYI6AXnD5N47EyJfm6+Ya0y6YGCrzv8AMQkAl1qO8KCZnY
ywVq8uNtximupX3l13KAwUymrRflBJMRticIDBi0M8+NYB7M+qQzjVW4+XF+U5iz
VNMzNQP9JV0dbTuNedHIj8vkvOeS7AMv11VyZ6leZr2Y4yEhIsoTnOfhHkz59/lo
SdBj5ZouoYRjlZs24Snu9rcpz3eLy5/MiSmlD9yJkMUR8aySzmdzAJdreOmakk+k
xk0XHWOa80aG7Gt6I0hugpQJuI5Diw==
=64A0
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.14
This was quite a quiet release for what I imagine are holiday related
reasons, the diffstat is dominated by some Cirrus Logic Kunit tests.
There's the usual mix of small improvements and fixes, plus a few new
drivers and features. The diffstat includes some DRM changes due to
work on HDMI audio.
- Allow clocking on each DAI in an audio graph card to be configured
separately.
- Improved power management for Renesas RZ-SSI.
- KUnit testing for the Cirrus DSP framework.
- Memory to meory operation support for Freescale/NXP platforms.
- Support for pause operations in SOF.
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
Add a new snd_soc_dai_prepare() which can be used (in an upcoming patch)
by soc-dapm.c. Use this new function internally in
snd_soc_pcm_dai_prepare() to avoid duplicating code.
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250114215617.336105-2-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As of commit cb18cd2603 ("ASoC: soc-core: do rtd->id trick at
snd_soc_add_pcm_runtime()") the ID stored in the PCM runtime data can
no longer be safely used to index the priv->dai_props array. This is
because the ID may be modified during snd_soc_add_pcm_runtime(), thus
resulting in an ID that's no longer a valid array index.
To fix this, use the position of the dai_link stored inside the PCM
runtime data relative to the start of the dai_link array as index into
the priv->dai_props array.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250114184314.3583-2-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the original change, rawmidi_info.tied_device showed -1 for the
unknown or untied device. But this would require the user-space to
check the protocol version and judge the value conditionally, which
is rather error-prone.
Instead, set the tied_device = 0 to be default as unknown, and
indicate the real device with the offset 1, for achieving more
backward compatibility.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20250114104711.19197-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current ASoC is using dai_link->dai_fmt to set DAI format for both
CPU/Codec. But because it is using same settings, and
SND_SOC_DAIFMT_CLOCK_PROVIDER is flipped for CPU, we can't set both
CPU/Codec as clock consumer, for example.
To solve this issue, this patch enable to use extra format for each
DAI which can keep compatibility with legacy system,
1. SND_SOC_DAIFMT_FORMAT_MASK
2. SND_SOC_DAIFMT_CLOCK
3. SND_SOC_DAIFMT_INV
4. SND_SOC_DAIFMT_CLOCK_PROVIDER
Legacy
dai_fmt includes 1, 2, 3, 4
New idea
dai_fmt includes 1, 2, 3
ext_fmt includes 4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87r05go5ja.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
So far we notify the sequencer client and port changes upon UMP FB
changes, but those aren't really corresponding to the UMP updates.
e.g. when a FB info gets updated, it's not notified but done only when
some of sequencer port attribute is changed. This is no ideal
behavior.
This patch adds the two new sequencer event types for notifying the
UMP EP and FB changes via the announce port. The new event takes
snd_seq_ev_ump_notify type data, which is compatible with
snd_seq_addr (where the port number is replaced with the block
number).
The events are sent when the EP and FB info gets updated explicitly
via ioctl, or the backend UMP receives the corresponding UMP
messages.
The sequencer protocol version is bumped to 1.0.5 along with it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-9-tiwai@suse.de
The UMP legacy rawmidi may turn on/off the substream dynamically
depending on the UMP Function Block information. So far, there was no
direct way to know whether the substream is disabled (inactive) or
not; at most one can take a look at the substream name string or try
to open and get -ENODEV.
This patch extends the rawmidi info ioctl to show the current inactive
state of the given substream. When the selected substream is
inactive, info flags field contains the new bit flag
SNDRV_RAWMIDI_INFO_STREAM_INACTIVE.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-3-tiwai@suse.de
The UMP legacy rawmidi is derived from the UMP rawmidi, but currently
there is no way to know which device is involved in other side.
This patch extends the rawmidi info ioctl to show the tied device
number. As default it stores -1, indicating that no tied device.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-2-tiwai@suse.de
The snd_hdac_adsp_xxx() wrap snd_hdac_reg_xxx() helpers to simplify
register access for AudioDSP drivers e.g.: the avs-driver. Byte- and
word-variants of said helps do not expand to bare readx/writex()
operations but functions instead and, due to pointer type
incompatibility, cause compilation to fail.
As the macros are utilized by the avs-driver alone, relocate the code
introduced with commit c19bd02e90 ("ALSA: hda: Add helper macros for
DSP capable devices") into the avs/ directory and update it to operate
on 'adev' i.e.: the avs-driver-context directly to fix the issue.
Fixes: c19bd02e90 ("ALSA: hda: Add helper macros for DSP capable devices")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250110113326.3809897-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
No driver is using disable_route_checks, let's remove it.
Because snd_soc_dapm_add_routes() itself will indicate detail error
when failed, this patch removes duplicate dev_err() not only
dev_warn() in error case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/87tta8268e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the list of entity_0 controls to better match version v1.0 of the
SDCA specification. Remove both INTSTAT_CLEAR and INT_ENABLE as these are
no longer used, and add some missing controls and bits into the enum. Also
rename the SDCA_CONTROL prefix to SDCA_CTL because this better matches the
macros in the sdw_registers.h header, and the names can get quite long so
saving a few characters is definitely a plus.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is handy to know whether the link has playback-only/capture-only flags
when debugging.
Signed-off-by: Stephen Gordon <gordoste@iinet.net.au>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250106050659.57924-3-gordoste@iinet.net.au
Signed-off-by: Mark Brown <broonie@kernel.org>
These fields are from the dai_link, not the dai.
Signed-off-by: Stephen Gordon <gordoste@iinet.net.au>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250106050659.57924-2-gordoste@iinet.net.au
Signed-off-by: Mark Brown <broonie@kernel.org>
The no_capture_mute flag might differ from platform to platform,
especially in the case of the wrapping implementations, like the
upcoming DRM HDMI Codec framework. Move the flag next to all other flags
in struct hdmi_codec_pdata.
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-2-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The upcoming DRM connector HDMI codec implementation is going to use
codec-specific data in the .get_dai_id to get drm_connector. Pass data
to the callback, as it is done with other hdmi_codec_ops callbacks.
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-1-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
We introduced a couple of helpers for copying iomem over iov_iter, and
the functions were formed like the former copy_from/to_user(), and the
return value was adjusted to 0/-EFAULT, which made the code transition
a bit easier at that time.
OTOH, the standard copy_from/to_iter() functions have different
argument orders and the return value, and this difference can be
confusing. It's not only confusing but dangerous; actually I did
write a wrong code due to that once :-<
For reducing the confusion, this patch changes the syntax of those
helpers to align with the standard copy_from/to_iter(). The argument
order is changed and the return value is the size of copied bytes.
The callers of those functions are updated accordingly, too.
Link: https://patch.msgid.link/20241230114903.4959-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is not helpful to error out on some SDCA function types, we
might as well report the correct name and let the driver core
simply not bind a driver to those functions for which the code
lacks support. Also given no functions currently have support,
it seems odd to select some as unsupported.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20241220173516.907406-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SDCA only supports 3-bits for the function address, but the ACPI value
is 64-bits. Update the code that parses this to do a bounds check
and error out on invalid addresses. Currently, an invalid address
would truncate to the bottom 3-bits when used and thus use a likely
incorrect address. With the bounds check, it is also now safe to
shrink the size of the adr member of sdca_function_desc to a u8 and
rearrange the struct members to pack better with the new size of adr.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20241220173516.907406-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Several of the SDCA files don't include all the headers they use
locally. These are included by the point of use through other
headers, so it is not currently causing any issues. However, files
should directly include things they directly use, so add the
missing header includes.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20241220173516.907406-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 5d7e328e20 ("ASoC: cs35l56: Revert support for dual-ownership
of ASP registers")
replaced cs35l56_force_sync_asp1_registers_from_cache() with a dummy
implementation so that the HDA driver would continue to build.
Remove the calls from HDA and remove the stub function.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241206105757.718750-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use snd_soc_dai_set_tdm_slot() on capture DAIs to prevent multiple
aggregated amps from trying to send data at the same time.
When the capture DAIs of multiple amps on a bus are aggregated they will
all be sharing the same bit slots for transmitted audio. This would lead
to bus errors if all channels on all amps were enabled, because multiple
amps would be trying to send data at the same time.
To prevent this, the available channels are divided between the amps on a
bus so that only one amp will be sending data for each channel position.
A CS35L56 has 4 TX channels, which must be split between all the amps on a
bus so that no two amps are using the same channel. This is done simply by
dividing by the number of amps on the bus, so that 1 amp can use all
4 channels, 2 amps can use 2 channels each, and 3 or 4 amps can only use
1 channel each.
The amps are usually aggregated across multiple SoundWire buses. In this
case there will be multiple cpu DAIs in the dailink. The channel mapping
is used to determine which amps are on each bus. The allocation of the
4 channels is done separately for each bus (only amps on the same bus can
interfere with each other).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241203104534.56719-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add speaker id check by gpio in ACPI for ASUS projects.
In other vendors, speaker id was checked by BIOS, and was applied in
last bit of subsys id, so we can load corresponding firmware binary file
for its speaker by subsys id.
But in ASUS project, the firmware binary name will be appended an extra
number to tell the speakers from different vendors. And this single digit
come from gpio level of speaker id in BIOS.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20241123073718.475-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see. Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:
- More API simplifications from Morimoto-san.
- Renaming of the sh directory to Renesas to reflect the focus on other
architectures.
- Factoring out of some of the common code for Realtek devices.
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
SM8750, RealTek RT721, and ST Microelectronics STM32MP25.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7NioACgkQJNaLcl1U
h9CQpQf/R0SfnI7RKkYNwyqiH+aHn75bMOAq5xyGqfUIithkWXFRwi+4r08wW0yF
3u6GLgwuzjHAGzupN+TxWTucglMdzwdaL+Z+JbVwhejK0ugTz/EJOS/Y0IW+pIoX
/icQuE3fcW1ODDrDoBp8KkkjkCGwUddR6Oth75oDMEFG++ug7x8zxJEEvhZ6deFr
7UOAa22BqdCRNFWGmYJvJH31SKsapQcA237/bRTHitiNhwxIYRnQ7VvaOES7BdcT
BtL2yCjgU2o3MGwdJdj5r/tm0HC6M1o7mJF2bb3i9dos6NB4uOM9UV4dKNcdKth9
TGIbd62noD5h03HzBCplREfA3ynrsA==
=6HJR
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.13
This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see. Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:
- More API simplifications from Morimoto-san.
- Renaming of the sh directory to Renesas to reflect the focus on other
architectures.
- Factoring out of some of the common code for Realtek devices.
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
SM8750, RealTek RT721, and ST Microelectronics STM32MP25.
snd_pcm_mmap_data_open() and _close() are defined as inline functions
in the public sound/pcm.h, but those are used only locally in
pcm_native.c, hence they should be better placed there.
Also, those are referred as callbacks, the useless inline is dropped.
Link: https://patch.msgid.link/20241113111628.17069-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_soc_dai has rate/channels/sample_bits parameter, but it is only valid
if symmetry is being enforced by symmetric_xxx flag on driver.
It is very difficult to know about it from current naming, and easy to
misunderstand it. add symmetric_ prefix for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfmd8bnf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Elem type 3 is PROBE_INFO in ext_manifest, add it to the list.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20241107120306.30680-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series refactors the SoundWire dai link init logic for Intel
and AMD generic SoundWire machine driver and also updates the stream_name
in dai_links structure.
Link: https://github.com/thesofproject/linux/pull/5218
some functions had parameter like below
xxx(..., rtd, ..., id);
This "id" is rtd->id. We don't need to have "id" on each functions
because we can get it from "rtd". Let's cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plnqb84p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rtd has "num". It sounds/looks like size of rtd or something,
but it will be mainly used at snd_pcm_new() as "device index".
This naming is confusable. Let's rename it to "id"
Some drivers are using rtd->num, so let's keep it so far, and remove
it if all user was switched.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfmub85z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 'no_pcm' as parameter for asoc_sdw_init_dai_link() so that
same function can be used for SOF and legacy(No DSP) stack.
Pass 'no_pcm' as 1 for Intel and AMD SOF based machine drivers.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241101020802.1103181-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
struct adau1373_platform_data" was not being used by any platform.
Hence, drop it and move to firmware based support. All the
configurations quirks present in the platform_data are now supported as
firmware properties.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241028-adau1373-shutdown-v2-3-647f56bbd182@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The last use of devm_snd_soc_register_dai() was removed by
commit fc4cb1e15f ("ASoC: topology: Properly unregister DAI on removal")
in 2021.
Remove it, and the helper it used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241028021226.477909-1-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a requirement to expose the audio hardware that accelerates various
tasks for user space such as sample rate converters, compressed
stream decoders, etc.
This is description for the API extension for the compress ALSA API which
is able to handle "tasks" that are not bound to real-time operations
and allows for the serialization of operations.
For details, refer to "compress-accel.rst" document.
Cc: Mark Brown <broonie@kernel.org>
Cc: Shengjiu Wang <shengjiu.wang@gmail.com>
Cc: Nicolas Dufresne <nicolas@ndufresne.ca>
Cc: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241002093904.1809799-1-perex@perex.cz
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Some SKUs are using host DMICs rather than the cs42l43 DMICs, update the
endpoint structure for these SKUs to remove the DMIC endpoint.
Charles Keepax (4):
ASoC: sdw_utils: Add support for exclusion DAI quirks
ASoC: sdw_utils: Add a quirk to allow the cs42l43 mic DAI to be
ignored
ASoC: Intel: sof_sdw: Add quirk for cs42l43 system using host DMICs
ASoC: Intel: sof_sdw: Add quirks for some new Lenovo laptops
include/sound/soc_sdw_utils.h | 2 ++
sound/soc/intel/boards/sof_sdw.c | 41 +++++++++++++++++++++++++++++
sound/soc/sdw_utils/soc_sdw_utils.c | 5 +++-
3 files changed, 47 insertions(+), 1 deletion(-)
--
2.43.0
The existing machine_quirk() returns a pointer to a soc_acpi_mach
structure.
For SoundWire/SDCA support, we need a slightly different
functionality where a quirk function either validates or NACKs an
initial selection, based on additional firmware/DMI information.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a generic match function for quirks, chances are we are going to
have lots of those...
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new module for SDCA (SoundWire Device Class for Audio) support.
For now just add a parser to identify the SDCA revision and the
function mask.
Note that the SDCA definitions and related MIPI DisCo properties are
defined only for ACPI platforms and extracted with _DSD helpers. There
is currently no support for Device Tree in the specification, the
'depends on ACPI' reflects this design limitation. This might change
in a future revision of the specification but for SDCA 1.0 ACPI is the
only supported type of platform firmware.
The SDCA library is defined with static inline fallbacks, which will
allow for unconditional addition of SDCA support in common parts of
the code.
The design follows a four-step process:
1) Basic information related to Functions is extracted from MIPI DisCo
tables and stored in the 'struct sdw_slave'. Devm_ based memory
allocation is not allowed at this point prior to a driver probe, so we only
store the function node, address and type.
2) When a codec driver probes, it will register subdevices for each
Function identified in phase 1)
3) a driver will probe for each subdevice and addition parsing/memory
allocation takes place at this level. devm_ based allocation is highly
encouraged to make error handling manageable.
4) Before the peripheral device becomes physically attached, register
access is not permitted and the regmaps are cache-only. When
peripheral device is enumerated, the bus level uses the
'update_status' notification; after optional device-level
initialization, the codec driver will notify each of the subdevices so
that they can start interacting with the hardware.
Note that the context extracted in 1) should be arguably be handled
completely in the codec driver probe. That would however make it
difficult to use the ACPI information for machine quirks, and
e.g. select different machine driver and topologies as done for the
RT712_VB handling later in the series. To make the implementation of
quirks simpler, this patchset extracts a minimal amount of context
(interface revision and number/type of Functions) before the codec
driver probe, and stores this context in the scope of the 'struct
sdw_slave'.
The SDCA library can also be used in a vendor-specific driver without
creating subdevices, e.g. to retrieve the 'initialization-table'
values to write platform-specific values as needed.
For more technical details, the SDCA specification is available for
public downloads at https://www.mipi.org/mipi-sdca-v1-0-download
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This structure is used to copy information from the 'sdw_slave'
structures, it's better to create a flexible array of 'sdw_slave'
pointers and directly access the information. This will also help
access additional information stored in the 'sdw_slave' structure,
such as an SDCA context.
This patch does not add new functionality, it only modified how the
information is retrieved.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_set_runtime_hwparams() is now doing very simple things.
We can makes it simply inline function, without having EXPORT_SYMBOL_GPL()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cyk0eso0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support some systems using host microphones add a quirk to allow the
cs42l43 microphone DAI link to be ignored.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016030344.13535-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The system contains a mechanism for certain DAI links to be included
based on a quirk. Add support for certain DAI links to excluded based on
a quirk, this is useful in situations where the vast majority of SKUs
utilise a feature so it is easier to quirk on those that don't.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016030344.13535-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is defined in header to 0xFF, which only allows to set values for 8
streams. In specification it is defined as bits from 0 to 29. In
practice there is no HW with 29 streams, but as the only place where the
value is used is chip initialization, it is best to make sure that all
bits are reset properly.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20241014094958.708563-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the eml_lock is already taken, we need an unlocked version.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241007121241.30914-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the trigger_tstamp_latched flag is set, the PCM core code assumes that
the low-level driver handles the trigger timestamping itself. Ensure that
runtime->trigger_tstamp is always updated.
Buglink: https://github.com/alsa-project/alsa-lib/issues/387
Reported-by: Zeno Endemann <zeno.endemann@mailbox.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241002081306.1788405-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbko34ACgkQJNaLcl1U
h9CQiwf9HseC6VkNQ0ISVZ2UsSf8K/HsHsdBGl7/CRr0SEvS3pszYMkKPbhRggsF
aQ4nfitXeN7Vo6S0tNXx63wzjpMPkjrHdV0XY+WJxfuCaeb3DHFEJ4uvlgv53aoh
M+wz1aldvKWjDPwhkzcJEaneQ36U7OlUSBsbFHR82dBDguEm+h29tAxTuLlwL5Zb
M8NuSfbh0cfY9Kk1cPGsqaHD8wjUeg6/Q5qnbDg2kAm0aF1fAxfyFKRX6Z5s9ekd
LeU3EIdRbI8UlHv7Afl0UKDYtYqL1ubwmjDb45HnsE4FmNEmDEbf8c1adRumZAjm
Js9yzswiaaHAvotCaEstFC6HYUL+oQ==
=jugn
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.12
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
Add calibration related kcontrol for speaker impedance calibration and
speaker leakage check for Chromebook.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240911232739.1509-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move SoundWire endpoint parsing helper functions to common place holder.
These functions will be used by other platform machine driver code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move Soundwire endpoint and dai link structures from Intel generic machine
driver code to common place holder(soc_sdw_utils.h). These structures will
be used in other platform SoundWire machine driver code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not set common_hdmi_codec_drv in SOF platform driver since no
machine driver needs it. Remove member variable common_hdmi_codec_drv
from snd_soc_acpi_mach_params structure.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It turned out that the topology ABI takes the standard PCM rate bits
as is, and it means that the recent change of the PCM rate bits would
lead to the inconsistent rate values used for topology.
This patch reverts the original PCM rate bit definitions while adding
the new rates to the extended bits instead. This needed the change of
snd_pcm_known_rates, too. And this also required to fix the handling
in snd_pcm_hw_limit_rates() that blindly assumed that the list is
sorted while it became unsorted now.
Fixes: 090624b7dc ("ALSA: pcm: add more sample rate definitions")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Closes: https://lore.kernel.org/1ab3efaa-863c-4dd0-8f81-b50fd9775fad@linux.intel.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240911135756.24434-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add 128kHz, 352.4kHz, 384kHz and 705.6kHz.
These definitions have been found working on eARC using a Murideo
Seven Generator.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20240906093422.2976550-1-jbrunet@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
rtd->initialized is used to know whether soc_init_pcm_runtime()
was correctly fined, and used to call snd_soc_link_exit().
We don't need to have it as bool, let's make it bit-field same as
other flags.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/87o752k7gq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a sample rate definition for 12kHz, 24kHz and 128kHz.
Admittedly, just a few drivers are currently using these sample
rates but there is enough of a recurrence to justify adding a definition
for them and remove some custom rate constraint code while at it.
The new definitions are not added to the interval definitions, such as
SNDRV_PCM_RATE_8000_44100, because it would silently add new supported
rates to drivers that may or may not support them. For sure the drivers
have not been tested for these new rates so it is better to leave them out
of interval definitions.
That being said, the added rates are multiples of well know rates families,
it is very likely that a lot of devices out there actually supports them.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-1-8371948d3921@baylibre.com
A larger set of fixes than I'd like at this point, but mainly due to
people working on fixing module autoloading by adding missing exports of
ID tables rather than anything particularly concerning. There are some
other runtime fixes and quirks, and a tweak to the ABI definition for
SOF which ensures that a struct layout doesn't vary depending on the
architecture of the host.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbaKqkACgkQJNaLcl1U
h9B6FAf/QlcNrFWx2m0SLhRqeeNRX3pwp7cjNLSo1TlIaBJy5NZJ1QjE7epl1/vx
4nzWi+3p1oql3h64RLIGUZ3dIUlFBoRBjmfF/aunxQ9VT7F8cqvLol+4sl+TcpTc
JWL5vuoCYcCsJDRwydUxcCyEClsC51PNn+WomqDP829yvgErob6VBXHhdRyZYd35
ffPBhAUOW0C+SOu7zGCAVqbtki2WMKc8gYweUhsuqEFQebOMkrO/sqJJsLbWje4D
LPGFfVDQaLQ+0h7pKR0m9Fwh17VTbsHGKEqt0qWK4GUfs61odsEs+C6BWfpM+S5k
comuzgnjtxgCV3K9URmYZx0435i+PQ==
=kMAy
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.11-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.11
A larger set of fixes than I'd like at this point, but mainly due to
people working on fixing module autoloading by adding missing exports of
ID tables rather than anything particularly concerning. There are some
other runtime fixes and quirks, and a tweak to the ABI definition for
SOF which ensures that a struct layout doesn't vary depending on the
architecture of the host.
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Some simplifications from Brent Lu for Chromebooks, a new SoundWire codec
support from Bard Liao, new cs42l43 match entries support from
Charles Keepax, Add quirks from some new Dell laptops from Maciej
Strozek, some ACPI match entries from Balamurugan C, and few bug
fixes from Pierre-Louis Bossart.
v2:
- Add "ASoC: SOF: Intel: hda: support BT link mask in mach_params"
commit to fix the build issue in v1.
Balamurugan C (2):
ASoC: Intel: soc-acpi: Add entry for sof_es8336 in ARL match table.
ASoC: Intel: soc-acpi: Add entry for HDMI_In capture support in ARL
match table
Bard Liao (4):
ASoC: Intel: sof_sdw: add rt1320 amp support
ASoC: SOF: Intel: hda: refactoring topology name fixup for HDA mach
ASoC: Intel: sof_sdw: move ignore_internal_dmic check earlier
ASoC: Intel: sof_sdw: overwrite mach_params->dmic_num
Brent Lu (5):
ASoC: SOF: Intel: hda: refactoring topology name fixup for SDW mach
ASoC: SOF: Intel: hda: support BT link mask in mach_params
ASoC: Intel: skl_hda_dsp_generic: support BT audio offload
ASoC: Intel: skl_hda_dsp_generic: remove hdac-hdmi support
ASoC: Intel: skl_hda_dsp_generic: use sof_hdmi_private to init HDMI
Charles Keepax (3):
ASoC: Intel: soc-acpi: arl: Add match entries for new cs42l43 laptops
ASoC: Intel: soc-acpi: adl: Add match entries for new cs42l43 laptops
ASoC: Intel: soc-acpi: lnl: Add match entries for new cs42l43 laptops
Maciej Strozek (1):
ASoC: Intel: sof_sdw: Add quirks from some new Dell laptops
Pierre-Louis Bossart (2):
ASoC: Intel: sof_sdw: make sof_sdw_quirk static
ASoC: Intel: boards: always check the result of
acpi_dev_get_first_match_dev()
include/sound/soc-acpi.h | 2 +
sound/soc/intel/boards/Kconfig | 2 +-
sound/soc/intel/boards/bytcht_cx2072x.c | 4 +
sound/soc/intel/boards/bytcht_da7213.c | 4 +
sound/soc/intel/boards/bytcht_es8316.c | 2 +-
sound/soc/intel/boards/bytcr_rt5640.c | 2 +-
sound/soc/intel/boards/bytcr_rt5651.c | 2 +-
sound/soc/intel/boards/cht_bsw_rt5645.c | 4 +
sound/soc/intel/boards/cht_bsw_rt5672.c | 4 +
sound/soc/intel/boards/skl_hda_dsp_common.c | 56 ++--
sound/soc/intel/boards/skl_hda_dsp_common.h | 39 +--
sound/soc/intel/boards/skl_hda_dsp_generic.c | 58 ++--
sound/soc/intel/boards/sof_es8336.c | 12 +-
sound/soc/intel/boards/sof_sdw.c | 85 +++++-
sound/soc/intel/boards/sof_sdw_common.h | 2 -
sound/soc/intel/boards/sof_wm8804.c | 4 +
.../intel/common/soc-acpi-intel-adl-match.c | 105 +++++++
.../intel/common/soc-acpi-intel-arl-match.c | 244 +++++++++++++++
.../intel/common/soc-acpi-intel-hda-match.c | 12 +-
.../intel/common/soc-acpi-intel-lnl-match.c | 104 +++++++
sound/soc/sdw_utils/soc_sdw_rt_amp.c | 11 +-
sound/soc/sdw_utils/soc_sdw_utils.c | 19 ++
sound/soc/sof/intel/hda.c | 281 ++++++++----------
23 files changed, 780 insertions(+), 278 deletions(-)
--
2.43.0
No driver is calling snd_soc_dpcm_can_be_xxx() functions. We don't need
to have EXPORT_SYMBOL_GPL() for them. Let's makes it static function.
One note is that snd_soc_dpcm_fe_can_update() is not used in upstream.
Use #if-endif and keep it for future support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h6b6df7e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
