Core changes:
- Perform basic checks on pin config properties so as not to
allow directly contradictory settings such as setting a pin
to more than one bias or drive mode.
- Handle input-threshold-voltage-microvolt property.
- Introduce pinctrl_gpio_get_config() handling in the core for
SCMI GPIO using pin control.
New drivers:
- GPIO-by-pin control driver (also apperaing in the GPIO pull
request) fulfilling a promise on a comment from
Grant Likely many years ago: "can't GPIO just be a front-end
for pin control?" it turns out it can, if and only if you
design something new from scratch, such as SCMI.
- Broadcom BCM7038 as a pinctrl-single delegate.
- Mobileye EyeQ6Lplus OLB pin controller.
- Qualcomm Eliza and Hawi families TLMM pin controllers.
- Qualcomm SDM670 and Milos family LPASS LPI pin controllers.
- Qualcomm IPQ5210 pin controller.
- Realtek RTD1625 pin controller support.
- Rockchip RV1103B pin controller support.
- Texas Instruments AM62L as a pinctrl-single delegate.
Improvements:
- Set config implementation for the Spacemit K1 pin controller.
-----BEGIN PGP SIGNATURE-----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=mkXM
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Perform basic checks on pin config properties so as not to allow
directly contradictory settings such as setting a pin to more than
one bias or drive mode
- Handle input-threshold-voltage-microvolt property
- Introduce pinctrl_gpio_get_config() handling in the core for SCMI
GPIO using pin control
New drivers:
- GPIO-by-pin control driver (also appearing in the GPIO pull
request) fulfilling a promise on a comment from Grant Likely many
years ago: "can't GPIO just be a front-end for pin control?" it
turns out it can, if and only if you design something new from
scratch, such as SCMI
- Broadcom BCM7038 as a pinctrl-single delegate
- Mobileye EyeQ6Lplus OLB pin controller
- Qualcomm Eliza and Hawi families TLMM pin controllers
- Qualcomm SDM670 and Milos family LPASS LPI pin controllers
- Qualcomm IPQ5210 pin controller
- Realtek RTD1625 pin controller support
- Rockchip RV1103B pin controller support
- Texas Instruments AM62L as a pinctrl-single delegate
Improvements:
- Set config implementation for the Spacemit K1 pin controller"
* tag 'pinctrl-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (84 commits)
pinctrl: qcom: Add Hawi pinctrl driver
dt-bindings: pinctrl: qcom: Describe Hawi TLMM block
dt-bindings: pinctrl: pinctrl-max77620: convert to DT schema
pinctrl: single: Add bcm7038-padconf compatible matching
dt-bindings: pinctrl: pinctrl-single: Add brcm,bcm7038-padconf
dt-bindings: pinctrl: apple,pinctrl: Add t8122 compatible
pinctrl: qcom: sdm670-lpass-lpi: label variables as static
pinctrl: sophgo: pinctrl-sg2044: Fix wrong module description
pinctrl: sophgo: pinctrl-sg2042: Fix wrong module description
pinctrl: qcom: add sdm670 lpi tlmm
dt-bindings: pinctrl: qcom: Add SDM670 LPASS LPI pinctrl
dt-bindings: qcom: lpass-lpi-common: add reserved GPIOs property
pinctrl: qcom: Introduce IPQ5210 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5210 pinctrl
pinctrl: qcom: Drop redundant intr_target_reg on modern SoCs
pinctrl: qcom: eliza: Fix interrupt target bit
pinctrl: core: Don't use "proxy" headers
pinctrl: amd: Support new ACPI ID AMDI0033
pinctrl: renesas: rzg2l: Drop superfluous blank line
pinctrl: renesas: rzg2l: Fix save/restore of {IOLH,IEN,PUPD,SMT} registers
...
Commit e2c58cbe3a ("pinctrl: rockchip: Simplify locking with
scoped_guard()") added a scoped_guard() over existing code containing a
"break" instruction. That "break" was for the outer (existing)
for-loop, which now exits inner, scoped_guard() loop. If GPIO driver
did not probe, then driver will not bail out, but instead continue to
configure the pin.
Fix the issue by simplifying the code - the break in original code was
leading directly to end of the function returning 0, thus we can simply
return here rockchip_pinconf_defer_pin status.
Reported-by: David Lechner <dlechner@baylibre.com>
Closes: https://lore.kernel.org/r/f5b38942-a584-4e78-a893-de4a219070b2@baylibre.com/
Fixes: e2c58cbe3a ("pinctrl: rockchip: Simplify locking with scoped_guard()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add pinctrl support for the RV1103B.
Based on the 5.10 Rockchip vendor kernel driver.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Core changes:
- Drop the unused devm_pinctrl_unregister() function.
- Move pretended generic pin control functionality out of the
core and into the Amlogic AM4 driver. We have something better
coming (hopefully).
New hardware support:
- Spacemit K3 (RISC-V) pin control support.
- Atmel AT91 PIO4 (ARM32) SAMA7D65 pin control support.
- Exynos9610 (ARM64) pin control support.
- Qualcomm Mahua TLMM (ARM64) pin control support.
- Microchip Polarfire MSSIO (RISC-V) pin control support.
- Ocelot LAN9645XF (multiplatform) pin control support.
Improvements:
- Using a few more guards for locking.
- Various nonurgent fixes and tweaks.
-----BEGIN PGP SIGNATURE-----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=lmwJ
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Drop the unused devm_pinctrl_unregister() function
- Move pretended generic pin control functionality out of the core
and into the Amlogic AM4 driver. We have something better coming
(hopefully)
New hardware support:
- Spacemit K3 (RISC-V) pin control support
- Atmel AT91 PIO4 (ARM32) SAMA7D65 pin control support
- Exynos9610 (ARM64) pin control support
- Qualcomm Mahua TLMM (ARM64) pin control support
- Microchip Polarfire MSSIO (RISC-V) pin control support
- Ocelot LAN9645XF (multiplatform) pin control support
Improvements:
- Using a few more guards for locking
- Various nonurgent fixes and tweaks"
* tag 'pinctrl-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (73 commits)
pinctrl: generic: move function to amlogic-am4 driver
pinctrl: intel: Align Copyright note with corporate guidelines
pinctrl: mediatek: remove unused drv_offset field
pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree
pinctrl: single: fix refcount leak in pcs_add_gpio_func()
pinctrl: meson: amlogic-a4: Fix device node reference leak in bank helpers
pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition
pinctrl: core: Remove duplicate error messages
pinctrl: core: Simplify devm_pinctrl_*()
pinctrl: core: Remove unused devm_pinctrl_unregister()
dt-bindings: pinctrl: spacemit: fix drive-strength check warning
pinctrl: fix kismet issues with GENERIC_PINCTRL
pinctrl: tangier: Join tng_pinctrl_probe() into its wrapper
pinctrl: tangier: Remove duplicate error messages
pinctrl: lynxpoint: Remove duplicate error messages
pinctrl: cherryview: Remove duplicate error messages
pinctrl: baytrail: Remove duplicate error messages
pinctrl: intel: Remove duplicate error messages
pinctrl: equilibrium: Fix device node reference leak in pinbank_init()
dt-bindings: pinctrl: pinctrl-microchip-sgpio: add LAN969x
...
Marking the whole controller as sleeping due to the pinctrl calls in the
.direction_{input,output} callbacks has the unfortunate side effect that
legitimate invocations of .get and .set, which cannot themselves sleep,
in atomic context now spew WARN()s from gpiolib.
However, as Heiko points out, the driver doing this is a bit silly to
begin with, as the pinctrl .gpio_set_direction hook doesn't even care
about the direction, the hook is only used to claim the mux. And sure
enough, the .gpio_request_enable hook exists to serve this very purpose,
so switch to that and remove the problematic business entirely.
Cc: stable@vger.kernel.org
Fixes: 20cf2aed89 ("gpio: rockchip: mark the GPIO controller as sleeping")
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/bddc0469f25843ca5ae0cf578ab3671435ae98a7.1769429546.git.robin.murphy@arm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Add support for the 5 rk3506 GPIO banks.
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This generic pin config property is confusingly named so let's
rename it to make things clearer.
There are already drivers in the tree that use PIN_CONFIG_OUTPUT
to *read* the value of an output driven pin, which is a big
semantic confusion for the head: are we then reading the
setting of the output or the actual value/level that is put
out on the pin?
We already have PIN_CONFIG_OUTPUT_ENABLE that turns on driver
buffers for output, so this can by logical conclusion only
drive the voltage level if it should be any different.
But if we read the pin, are we then reading the *setting* of
the output value or the *actual* value we can see on the
line?
If the pin has not first been set into output mode with
PIN_CONFIG_OUTPUT_ENABLE, but is instead in some input mode
or tristate, what will reading this property actually
return?
Reading the current users reading this property it is clear
that what we read is the logical level of the pin as 0 or 1
depending on if it is low or high.
Rename it to PIN_CONFIG_LEVEL so it is crystal clear that
we set or read the voltage level of the pin and nothing else.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add gpio and pinctrl support for the 5 GPIO banks on RK3528.
Signed-off-by: Steven Liu <steven.liu@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/20250228064024.3200000-4-jonas@kwiboo.se
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the 5 GPIO banks in the rk3562.
Signed-off-by: Steven Liu <steven.liu@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/20241224093620.3815705-1-kever.yang@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/pinctrl to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/20241007205803.444994-8-u.kleine-koenig@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If one improperly writes a rockchip,pins property, the pinctrl driver
basically just states that one in the myriad of pinctrl nodes is
improper but does not tell you which one.
Instead, let's print the full name of the Device Tree node that is
improper as well as provide more context on what the expected content
is.
Note that this should be rather unnecessary if one reads the output of
the dtbs_check as it would be highlighted as an error.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/20241002-pinctrl-rockchip-error-modulo-4-v1-1-4addb4e5732a@cherry.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC.
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC.
- Rockchip rk3576 pin control support.
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000.
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton
and a few other drivers.
-----BEGIN PGP SIGNATURE-----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=7uZC
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC
- Rockchip rk3576 pin control support
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton and a
few other drivers"
* tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (67 commits)
pinctrl: intel: Constify struct intel_pinctrl parameter
pinctrl: Remove redundant null pointer checks in pinctrl_remove_device_debugfs()
pinctrl: baytrail: Drop duplicate return statement
pinctrl: intel: Inline intel_gpio_community_irq_handler()
dt-bindings: pinctrl: qcom: add missing type to GPIO hogs
pinctrl: madera: Simplify with dev_err_probe()
pinctrl: k210: Use devm_clk_get_enabled() helpers
pinctrl: Join split messages and remove double whitespace
pinctrl: renesas: rzg2l: Move pinconf_to_config_argument() call outside of switch cases
pinctrl: renesas: rzg2l: Introduce single macro for digital noise filter configuration
pinctrl: renesas: rzg2l: Replace of_node_to_fwnode() with more suitable API
pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function
pinctrl: sunxi: Use devm_clk_get_enabled() helpers
pinctrl: sophgo: cv18xx: fix missed __iomem type identifier
pinctrl: stmfx: Use string_choices API instead of ternary operator
pinctrl: nomadik: Use kmemdup_array instead of kmemdup for multiple allocation
pinctrl: intel: Introduce for_each_intel_gpio_group() helper et al.
pinctrl: intel: Constify intel_get_community() returned object
pinctrl: intel: Implement high impedance support
pinctrl: intel: Add __intel_gpio_get_direction() helper
...
The base iomux offsets for each GPIO pin line are accumulatively
calculated based off iomux width flag in rockchip_pinctrl_get_soc_data.
If the iomux width flag is one of IOMUX_WIDTH_4BIT, IOMUX_WIDTH_3BIT or
IOMUX_WIDTH_2BIT, the base offset for next pin line would increase by 8
bytes, otherwise it would increase by 4 bytes.
Despite most of GPIO2-B iomux have 2-bit data width, which can be fit
into 4 bytes space with write mask, it actually take 8 bytes width for
whole GPIO2-B line.
Commit e8448a6c81 ("pinctrl: rockchip: fix pinmux bits for RK3328
GPIO2-B pins") wrongly set iomux width flag to 0, causing all base
iomux offset for line after GPIO2-B to be calculated wrong. Fix the
iomux width flag to IOMUX_WIDTH_2BIT so the offset after GPIO2-B is
correctly increased by 8, matching the actual width of GPIO2-B iomux.
Fixes: e8448a6c81 ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins")
Cc: stable@vger.kernel.org
Reported-by: Richard Kojedzinszky <richard@kojedz.in>
Closes: https://lore.kernel.org/linux-rockchip/4f29b743202397d60edfb3c725537415@kojedz.in/
Tested-by: Richard Kojedzinszky <richard@kojedz.in>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Trevor Woerner <twoerner@gmail.com>
Link: https://lore.kernel.org/20240709105428.1176375-1-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
rockchip_pmx_set reset all pinmuxs in group to 0 in the case of error,
add missing bank data retrieval in that code to avoid setting mux on
unexpected pins.
Fixes: 14797189b3 ("pinctrl: rockchip: add return value to rockchip_set_mux")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Link: https://lore.kernel.org/r/20240606125755.53778-5-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
rk3328_pin_ctrl uses type of RK3288 which has a hack in
rockchip_pinctrl_suspend and rockchip_pinctrl_resume to restore GPIO6-C6
at assume, the hack is not applicable to RK3328 as GPIO6 is not even
exist in it. So use a dedicated pinctrl type to skip this hack.
Fixes: 3818e4a767 ("pinctrl: rockchip: Add rk3328 pinctrl support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Link: https://lore.kernel.org/r/20240606125755.53778-4-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinmux bits for GPIO3-B1 to GPIO3-B6 pins are not explicitly
specified in RK3328 TRM, however we can get hint from pad name and its
correspinding IOMUX setting for pins in interface descriptions. The
correspinding IOMIX settings for these pins can be found in the same
row next to occurrences of following pad names in RK3328 TRM.
GPIO3-B1: IO_TSPd5m0_CIFdata5m0_GPIO3B1vccio6
GPIO3-B2: IO_TSPd6m0_CIFdata6m0_GPIO3B2vccio6
GPIO3-B3: IO_TSPd7m0_CIFdata7m0_GPIO3B3vccio6
GPIO3-B4: IO_CARDclkm0_GPIO3B4vccio6
GPIO3-B5: IO_CARDrstm0_GPIO3B5vccio6
GPIO3-B6: IO_CARDdetm0_GPIO3B6vccio6
Add pinmux data to rk3328_mux_recalced_data as mux register offset for
these pins does not follow rockchip convention.
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 3818e4a767 ("pinctrl: rockchip: Add rk3328 pinctrl support")
Link: https://lore.kernel.org/r/20240606125755.53778-3-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinmux bits for GPIO2-B0 to GPIO2-B6 actually have 2 bits width,
correct the bank flag for GPIO2-B. The pinmux bits for GPIO2-B7 is
recalculated so it remain unchanged.
The pinmux bits for those pins are not explicitly specified in RK3328
TRM, however we can get hint from pad name and its correspinding IOMUX
setting for pins in interface descriptions. The correspinding IOMIX
settings for GPIO2-B0 to GPIO2-B6 can be found in the same row next to
occurrences of following pad names in RK3328 TRM.
GPIO2-B0: IO_SPIclkm0_GPIO2B0vccio5
GPIO2-B1: IO_SPItxdm0_GPIO2B1vccio5
GPIO2-B2: IO_SPIrxdm0_GPIO2B2vccio5
GPIO2-B3: IO_SPIcsn0m0_GPIO2B3vccio5
GPIO2-B4: IO_SPIcsn1m0_FLASHvol_sel_GPIO2B4vccio5
GPIO2-B5: IO_ I2C2sda_TSADCshut_GPIO2B5vccio5
GPIO2-B6: IO_ I2C2scl_GPIO2B6vccio5
This fix has been tested on NanoPi R2S for fixing confliting pinmux bits
between GPIO2-B7 with GPIO2-B5.
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 3818e4a767 ("pinctrl: rockchip: Add rk3328 pinctrl support")
Link: https://lore.kernel.org/r/20240606125755.53778-2-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20231009083856.222030-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230714174901.4062397-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add PINCTRL_PINFUNCTION() macro and use it in several
drivers.
New drivers:
- New driver for the StarFive JH7110 SoC "sys" and "aon"
(always-on) pin controllers. (RISC-V.)
- New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin
controller.
- New subdrivers for the Qualcomm SM8550 SoC and LPASS
pin controllers.
- New subdriver for the Qualcomm SA8775P SoC pin controller.
- New subdriver for the Qualcomm IPQ5332 SoC pin controller.
- New (trivial) support for Qualcomm PM8550 and PMR735D PMIC
pin control.
- New subdriver for the Mediatek MT7981 SoC pin controller.
Improvements:
- Several cleanups and refactorings to the Intel drivers.
- Add 4KOhm bias support to the Intel driver.
- Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver.
- Support general purpose clocks in the Qualcomm MSM8226 SoC.
- Several conversions to use the new I2C .probe_new() call.
- Massive clean-up of the Qualcomm Device Tree YAML schemas.
- Add VIN[45] pins, groups and functions to the Renesas
r8a77950 SoC driver.
-----BEGIN PGP SIGNATURE-----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=P75R
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Nothing special, notably a lot of new Qualcomm hardware is supported,
a RISC-V reference SoC and then some cleanups both in code and device
tree bindings.
Core changes:
- Add PINCTRL_PINFUNCTION() macro and use it in several drivers
New drivers:
- New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on)
pin controllers. (RISC-V.)
- New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller
- New subdrivers for the Qualcomm SM8550 SoC and LPASS pin
controllers
- New subdriver for the Qualcomm SA8775P SoC pin controller
- New subdriver for the Qualcomm IPQ5332 SoC pin controller
- New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin
control
- New subdriver for the Mediatek MT7981 SoC pin controller
Improvements:
- Several cleanups and refactorings to the Intel drivers
- Add 4KOhm bias support to the Intel driver
- Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver
- Support general purpose clocks in the Qualcomm MSM8226 SoC
- Several conversions to use the new I2C .probe_new() call
- Massive clean-up of the Qualcomm Device Tree YAML schemas
- Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC
driver"
* tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits)
pinctrl: qcom: Add support for i2c specific pull feature
pinctrl: starfive: Add StarFive JH7110 aon controller driver
pinctrl: starfive: Add StarFive JH7110 sys controller driver
dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
pinctrl: add mt7981 pinctrl driver
dt-bindings: pinctrl: add bindings for MT7981 SoC
dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated
pinctrl: qcom: Introduce IPQ5332 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern
pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS
dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS
pinctrl: at91: use devm_kasprintf() to avoid potential leaks
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs
dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern
dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern
dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example
dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example
...
IO mux selection is configured in PMU_GRF_SOC_CON4 and GRF_IOFUNC_SEL0-5
regs on RK3568. pwm0-2 is configured in PMU_GRF reg and the rest is
configured in GRF_IOFUNC regs according to TRM [1].
Update mux route data to reflect this and use proper detection pin for
UART1 IO mux M1.
This fixes HDMITX IO mux M1 selection and makes it possible to enable
HDMI CEC on my Radxa ROCK 3 Model A v1.31 board.
[1] http://opensource.rock-chips.com/images/2/26/Rockchip_RK3568_TRM_Part1_V1.3-20220930P.PDF
Fixes: c0dadc0e47 ("pinctrl: rockchip: add support for rk3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230110084636.1141740-1-jonas@kwiboo.se
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When reading pinconf-pins from debugfs it fails to get the configured pull
type on RK3568, "unsupported pinctrl type" error messages is also reported.
Fix this by adding support for RK3568 in rockchip_get_pull, including a
reverse of the pull-up value swap applied in rockchip_set_pull so that
pull-up is correctly reported in pinconf-pins.
Also update the workaround comment to reflect affected pins, GPIO0_D3-D6.
Fixes: c0dadc0e47 ("pinctrl: rockchip: add support for rk3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20230110172955.1258840-1-jonas@kwiboo.se
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
of_find_node_by_phandle() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: d3e5116119 ("pinctrl: add pinctrl driver for Rockchip SoCs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102112845.3982407-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The mux routes are incomplete for the PX30. This was discovered because
we had a HW design using cif-clkoutm1 with the correct pinmux in the
Device Tree but the clock would still not work.
There are actually two muxing required: the pin muxing (performed by the
usual Device Tree pinctrl nodes) and the "function" muxing (m0 vs m1;
performed by the mux routing inside the driver). The pin muxing was
correct but the function muxing was not.
This adds the missing pins and their configuration for the mux routes
that are already specified in the driver.
Note that there are some "conflicts": it is possible *in Device Tree* to
(attempt to) mux the pins for e.g. clkoutm1 and clkinm0 at the same time
but this is actually not possible in hardware (because both share the
same bit for the function muxing). Since it is an impossible hardware
design, it is not deemed necessary to prevent the user from attempting
to "misconfigure" the pins/functions.
Fixes: 87065ca9b8 ("pinctrl: rockchip: Add pinctrl support for PX30")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20221017-upstream-px30-cif-clkoutm1-v1-0-4ea1389237f7@theobroma-systems.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.
This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.
Let's re-implement the pinmux_ops.gpio_set_direction callback so that
the gpio subsystem can request from the pinctrl driver to put the pin in
its GPIO function.
Fixes: 9ce9a02039 ("pinctrl/rockchip: drop the gpio related codes")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220930132033.4003377-2-foss+kernel@0leil.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
RV1126 has five GPIOs groups - GPIO0 in PD_MMU and GPIO1-4
in PD_BUS.
In GPIO0, up to Lower C group GPIO0_C[3:0] is part of PMU
but rest of the groups from there are part of GRF.
Added pinctrl support for RV1126 and the pull, drv and schmitt
calculations are inferred from [1] authored by Jianqun Xu.
[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/pinctrl/pinctrl-rockchip.c
Cc: linux-gpio@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20220818124132.125304-8-jagan@edgeble.ai
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Merge tag 'v5.18-rc5' into devel
Merge in Linux 5.18-rc5 since new code to the STM32 driver
depend in a non-trivial way on the fixes merged in -rc5.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pinctrl support for RK3588.
[merged in downstream fixes, simplified register lookup logic for better
maintanence at the cost of a bit more static const memory and fixed some
incorrect registers]
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20220422170920.401914-14-sebastian.reichel@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add error handling for the pull and driver register getters in preparation
for RK3588 support.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heiko Stübner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220422170920.401914-13-sebastian.reichel@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
All the entries are sorted according to num/pin except for two
entries. Sort them too.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220420142432.248565-2-luca.ceresoli@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some of the pinmuxing bits described in rk3308_mux_recalced_data are wrong,
pointing to non-existing registers.
Fix the entire table.
Also add a comment in front of each entry with the same string that appears
in the datasheet to make the table easier to compare with the docs.
This fix has been tested on real hardware for the gpio3b3_sel entry.
Fixes: 7825aeb7b2 ("pinctrl: rockchip: add rk3308 SoC support")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220420142432.248565-1-luca.ceresoli@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for deferring other params like PIN_CONFIG_INPUT_ENABLE.
This will be used to add support for PIN_CONFIG_INPUT_ENABLE to the
driver.
Fixes: e7165b1dff ("pinctrl/rockchip: add a queue for deferred pin output settings on probe")
Fixes: 59dd178e1d ("gpio/rockchip: fetch deferred output settings on probe")
Signed-off-by: Caleb Connolly <kc@postmarketos.org>
Link: https://lore.kernel.org/r/20220328005005.72492-2-kc@postmarketos.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 1e747e59cc ("pinctrl: rockchip: base regmap supplied by a syscon")
Fixes: 14dee8677e ("pinctrl: rockchip: let pmu registers be supplied by a syscon")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307120234.28657-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO nodes are not themselves busses, so passing rockchip_bank_match
here is wrong. Passing NULL instead uses the standard bus match table
which is more appropriate.
devm_of_platform_populate() shows that this is the normal way to call
of_platform_populate() from a device driver, so in order to match that
more closely also add the pinctrl device as the parent for the newly
created GPIO controllers.
Specifically, using the wrong match here can break dynamic GPIO hogs as
marking the GPIO bank as a bus means that of_platform_notify() will set
OF_POPULATED on new child nodes and if this happens before
of_gpio_notify() is called then the new hog will be skipped as
OF_POPULATED is already set.
Fixes: 9ce9a02039 ("pinctrl/rockchip: drop the gpio related codes")
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211126151352.1509583-1-john@metanate.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since we have a generic helper, switch the module to use it.
As a side effect, add check for the memory allocation failures and
cleanup it either in error case or when driver is unloading.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
It's fine to call dev_err_probe() in ->probe() when error code is known.
Convert the driver to use dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Use the devm_platform_get_and_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Use temporary variable for struct device to make code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Kernel doc validator is not happy:
.../pinctrl-rockchip.c:45: warning: This comment starts with '/**', but isn't a kernel-doc comment.
Drop it as it's indeed not a kernel doc comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
The separation of pinctrl and gpio drivers created a tiny window where
a pinconfig setting might produce a null-pointer dereference.
The affected device were rk3288-veyron devices in this case.
Pinctrl-hogs are claimed when the pinctrl driver is registered,
at which point their pinconfig settings will be applied.
At this time the now separate gpio devices will not have been created
yet and the matching driver won't have probed yet, making the gpio->foo()
call run into a null-ptr.
As probing is not really guaranteed to have been completed at a specific
time, introduce a queue that can hold the output settings until the gpio
driver has probed and will (in a separate patch) fetch the elements
of the list.
We expect the gpio driver to empty the list, but will nevertheless empty
it ourself on remove if that didn't happen.
Fixes: 9ce9a02039 ("pinctrl/rockchip: drop the gpio related codes")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210913224926.1260726-4-heiko@sntech.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With the patch to separate the gpio driver from the pinctrl driver, now
the pinctrl-rockchip can drop the gpio related codes now.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816012146.1119289-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Separate struct rockchip_pin_bank to pinctrl-rockchip.h file, which will
be used by gpio-rockchip driver in the future.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816011948.1118959-3-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
