The mdelay() is called in sleeping context and it should be OK to delay
slightly longer than requested, so switch the code to use fsleep() to
avoid spinning.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The ilitek touchscreen driver uses the non-sleeping gpiod_set_value
function for reset.
Switch to using gpiod_set_value_cansleep() when controlling reset_gpio to
support GPIO providers that may sleep, such as I2C GPIO expanders.
Further switch the mdelay calls on the reset path to fsleep (preferred
in non-atomic contexts).
This fixes noisy complaints in kernel log for gpio providers that do
sleep.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20251201-imx8mp-hb-iiot-v4-2-53a4cd6c21bf@solid-run.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Like the TWL4030, these PMICs also have a power button feature, so extend
the TWL4030 power button driver. As the irqchip of the TWL6030 mfd driver
does not provide mask, unmask finctions, do it manually.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251106-twl6030-button-v4-2-fdf1aa6e1e9a@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
WQ_UNBOUND on the custom workqueue instead.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-5-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-4-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-3-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-2-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Under certain conditions (more prevalent after a suspend/resume cycle),
the touchscreen controller can send the "boot complete" interrupt before
it actually finished booting. In those cases, attempting to read touch
data resuls in a stream of "not ready" messages being read and
interpreted as a touch report. Check that the response is in fact a
touch report and discard it otherwise.
Reported-by: pitust <piotr@stelmaszek.com>
Closes: https://oftc.catirclogs.org/asahi/2025-12-17#34878715;
Fixes: 471a92f8a2 ("Input: apple_z2 - add a driver for Apple Z2 touchscreens")
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://patch.msgid.link/20251218-z2-init-fix-v1-1-48e3aa239caf@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The dev3_register_work delayed work item is initialized within
alps_reconnect() and scheduled upon receipt of the first bare
PS/2 packet from an external PS/2 device connected to the ALPS
touchpad. During device detachment, the original implementation
calls flush_workqueue() in psmouse_disconnect() to ensure
completion of dev3_register_work. However, the flush_workqueue()
in psmouse_disconnect() only blocks and waits for work items that
were already queued to the workqueue prior to its invocation. Any
work items submitted after flush_workqueue() is called are not
included in the set of tasks that the flush operation awaits.
This means that after flush_workqueue() has finished executing,
the dev3_register_work could still be scheduled. Although the
psmouse state is set to PSMOUSE_CMD_MODE in psmouse_disconnect(),
the scheduling of dev3_register_work remains unaffected.
The race condition can occur as follows:
CPU 0 (cleanup path) | CPU 1 (delayed work)
psmouse_disconnect() |
psmouse_set_state() |
flush_workqueue() | alps_report_bare_ps2_packet()
alps_disconnect() | psmouse_queue_work()
kfree(priv); // FREE | alps_register_bare_ps2_mouse()
| priv = container_of(work...); // USE
| priv->dev3 // USE
Add disable_delayed_work_sync() in alps_disconnect() to ensure
that dev3_register_work is properly canceled and prevented from
executing after the alps_data structure has been deallocated.
This bug is identified by static analysis.
Fixes: 04aae283ba ("Input: ALPS - do not mix trackstick and external PS/2 mouse data")
Cc: stable@kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/b57b0a9ccca51a3f06be141bfc02b9ffe69d1845.1765939397.git.duoming@zju.edu.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20251215-fts-fixes-v1-3-8c1e3a63ebf1@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
No functional change.
Fixes: 78bcac7b2a ("Input: add support for the STMicroelectronics FingerTip touchscreen")
Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20251215-fts-fixes-v1-2-8c1e3a63ebf1@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We're trying to enable regulator, not disable it.
Fixes: 78bcac7b2a ("Input: add support for the STMicroelectronics FingerTip touchscreen")
Suggested-by: Petr Hodina <petr.hodina@protonmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20251215-fts-fixes-v1-1-8c1e3a63ebf1@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The device occasionally wakes up from suspend with missing input on the
internal keyboard and the following suspend attempt results in an instant
wake-up. The quirks fix both issues for this device.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251124203336.64072-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reword one of the key event error messages to clarify its meaning: it's
not necessarily an incomplete message, more of a mismatch length.
Clarify that and log the expected and received length too.
Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Link: https://patch.msgid.link/20251209154706.529784-2-fabiobaltieri@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If 'CONFIG_PM_SLEEP' is not set, compiler throws warning for *suspend() and
*resume() function for this driver. Using new 'DEFINE_SIMPLE_DEV_PM_OPS'
fixes it.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://patch.msgid.link/20251210211149.543928-1-vaibhavgupta40@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20251027115823.391080-3-sakari.ailus@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20251027115823.391080-2-sakari.ailus@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20251027115823.391080-1-sakari.ailus@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmksyEIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGuRUH/i5oyGqw5tJmyAKa
N+RZ1zU/d9NnuYVhHylRFXxIQY+ZqjQMF82meEJP3zZn7c73LDQEtcSuygrmtbmm
66TpfU3KJSK5YCYFT9kL9D3IAMpHoOk5smyp1KxVNIfLO5qT7fiWFlEvvWjjb+7/
oJAa3iX6uFtoeBHuGBUU/r6etoL8rE6H3uGZloA09+AMc+CF36vHloW5Mq7++51p
HFfge8mAqKXF5ZayCG9+I+6nwK277MfVmgcz4PIvHQQhPUa9CMvy96CWnObQo8lP
GpNlLf92A/C5S5DsMgVjFDf4MBSsE1hiFLxu3kKPzl8L41uvg/aiMIJqc1BIeZjw
/Okl7wo=
=lz6b
-----END PGP SIGNATURE-----
Merge tag 'v6.18' into next
Sync up with the mainline to bring in the latest APIs.
lkkbd_interrupt() schedules lk->tq via schedule_work(), and the work
handler lkkbd_reinit() dereferences the lkkbd structure and its
serio/input_dev fields.
lkkbd_disconnect() and error paths in lkkbd_connect() free the lkkbd
structure without preventing the reinit work from being queued again
until serio_close() returns. This can allow the work handler to run
after the structure has been freed, leading to a potential use-after-free.
Use disable_work_sync() instead of cancel_work_sync() to ensure the
reinit work cannot be re-queued, and call it both in lkkbd_disconnect()
and in lkkbd_connect() error paths after serio_open().
Signed-off-by: Minseong Kim <ii4gsp@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251212052314.16139-1-ii4gsp@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- DT bindings for Melfas MIP4 touchscreen controller and TWL4030 keypad
have been converted to the DT schema
- simple touch controller bindings have been consolidated to
trivial-touch.yaml DT schema
- memory allocation failure noise was removed from qnap-mcu-input and
zforce_ts dirvers
- ti_am335x_tsc driver was hardened to handle invalid (too large) number
of coordinates specified in device tree
- a cleanup in Cypress cyttsp5 driver to use %pe to print error code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaTeEdgAKCRBAj56VGEWX
nGVNAQCm5vvTAVVQVYAS9k9KPc0PXthTE0h1mLGVUH2eE0qnnwD/QBv4GTfGR18I
YBhuEZ2aPh6TNd7EwxZwEthAoKquCAA=
=KI1P
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- DT bindings for Melfas MIP4 touchscreen controller and TWL4030 keypad
have been converted to the DT schema
- simple touch controller bindings have been consolidated to
trivial-touch.yaml DT schema
- memory allocation failure noise was removed from qnap-mcu-input and
zforce_ts dirvers
- ti_am335x_tsc driver was hardened to handle invalid (too large)
number of coordinates specified in device tree
- a cleanup in Cypress cyttsp5 driver to use %pe to print error code
* tag 'input-for-v6.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - clamp coordinate_readouts to DT maximum (6)
dt-bindings: touchscreen: consolidate simple touch controller to trivial-touch.yaml
dt-bindings: touchscreen: trivial-touch: add reset-gpios and wakeup-source
dt-bindings: input: ti,twl4030-keypad: convert to DT schema
Input: zforce_ts - omit error message when memory allocation fails
Input: qnap-mcu-input - omit error message when memory allocation fails
dt-bindings: input: Convert MELFAS MIP4 Touchscreen to DT schema
dt-bindings: touchscreen: move ar1021.txt to trivial-touch.yaml
dt-bindings: touchscreen: rename maxim,max11801.yaml to trivial-touch.yaml
Input: cyttsp5 - use %pe format specifier
Replace the hand-rolled %02x formatting of the Z packet warning in the
BYD driver with the %*ph format specifier. %*ph is the preferred helper
for printing a buffer in hexadecimal and makes the logging clearer and
more consistent.
Signed-off-by: Vivek BalachandharTN <vivek.balachandhar@gmail.com>
Link: https://patch.msgid.link/20251202033120.2264474-1-vivek.balachandhar@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is a relatively busy release for the regulator API, as well as a
good collection of new drivers we've got a little bit of core work and a
bunch of cleanup throughout the subsystem:
- Support for propagating undervoltage events to child regulators.
- Undo enables done on supplies when setting enabling regulators via
constraints fails.
- Pull in some gpiolib changes adding support for shared GPIOs to
the gpiolib core, using them to replace the open coded variant of this
that we've had in the regulator API for a long time.
- Support for Fitipower FP9931 and JD9330, Mediatek MT6316, MT6363 and
MT6373, NXP PF1550 and Qualcomm PMH01XX and PMCX0102
The PF1550 support was originally going to go via the MFD tree but
Krzysztof's cleanup work overlapped with it so I pulled in Lee's signed
tag with support for the device.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkt72UACgkQJNaLcl1U
h9Dm2wf+JhjBLxviOozOhSv17wKnCYpApL12vPIHhv3lGu4J9wPiqqe3eB6PrTPo
xkuIb8u68wOveh7uLgr/kprH/YUxofrkCEwZjy57geSanuqIEzVoqU//4NKca9ND
UeoDiTYLx5JQVzlo12tSFhLCvDsFgdnemWFfubRPQGTJA/RElMxrNySf3yUQbYBE
ODpTGbXqt4LnYQTJRvVM8/0KzREpxD0X8fSISKpA3KYBFntMexZcgrs5pqijwfMS
Euxff2UpFzjodmYEusWfKOFeZXmd/cClF26Tol7oaeaurr1pNu1i0nBUprbd/rzL
YTV8QeiftLqER/h2iDX4f8iTmvVhzA==
=9IkF
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a relatively busy release for the regulator API, as well as a
good collection of new drivers we've got a little bit of core work and
a bunch of cleanup throughout the subsystem:
- Support for propagating undervoltage events to child regulators
- Undo enables done on supplies when setting enabling regulators via
constraints fails
- Pull in some gpiolib changes adding support for shared GPIOs to the
gpiolib core, using them to replace the open coded variant of this
that we've had in the regulator API for a long time
- Support for Fitipower FP9931 and JD9330, Mediatek MT6316, MT6363
and MT6373, NXP PF1550 and Qualcomm PMH01XX and PMCX0102
The PF1550 support was originally going to go via the MFD tree but
Krzysztof's cleanup work overlapped with it so I pulled in Lee's
signed tag with support for the device"
* tag 'regulator-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (50 commits)
regulator: fp9931: Fix spelling mistake "failid" -> "failed"
regulator: core: Protect regulator_supply_alias_list with regulator_list_mutex
regulator: pf9453: Constify pointers to 'regulator_desc' wrap struct
regulator: pca9450: Constify pointers to 'regulator_desc' wrap struct
regulator: mt6358: Constify pointers to 'regulator_desc' wrap struct
regulator: bd96801: Constify pointers to 'regulator_desc' wrap struct
regulator: bd718x7: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71828: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71815: Constify pointers to 'regulator_desc' wrap struct
regulator: Use container_of_const() when all types are const
regulator: pca9450: Fix error code in probe()
regulator: qcomm-labibb: replace use of system_wq with system_dfl_wq
regulator: Add FP9931/JD9930 driver
dt-bindings: regulator: Add Fitipower FP9931/JD9930
dt-bindings: vendor-prefixes: Add Fitipower
regulator: make the subsystem aware of shared GPIOs
regulator: renesas-usb-vbus-regulator: Remove unused headers
regulator: pca9450: Add support for setting debounce settings
regulator: dt-bindings: pca9540: add debounce timer configuration
regulator: core: disable supply if enabling main regulator fails
...
Merge series from Johan Hovold <johan@kernel.org>:
This series fixes device and OF node reference leaks during probe and
a clock prepare imbalance on probe failures.
Included is a related cleanup of an error path.
DT binding (ti,am3359-tsc.yaml) sets ti,coordinate-readouts to a
maximum of 6. The MFD parent also enforces that
(readouts * 2 + 2) + adc_channels <= 16 and fails probe if this
is violated, so the touchscreen subdriver will not even probe
in those cases.
Clamp coordinate_readouts > 6 to 6 in the subdriver to align with the
binding and keep behavior sane if invalid platform data bypasses schema
checks. Keep the existing default to 5 for non-positive values.
No functional change with valid DT.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251117032358.891822-1-junjie.cao@intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmkaT2IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGnakIAIq6O35+abAlDGe7
n8IwX/4hwDJ9Ol2vddg6jTdio3szSlvcXRAyijkG35etLap+i+Q78Q9H1fRcQ8CF
5t9kfs5oCVWEDlsHMI+Q38vYB3tWikaIUIuao6pH5U50fsA0KM/287TLYdzvmBsK
gy0BHoZhl++xdMsD2HNwt08RrK/IyY+Zp9i7pKhcsxJiJCgy8nq5ZxhmRPbqTKNc
IqIBPzG+UYcOd88Iz377Ax+TnzWaTpwyvfaiU8DVFMN0FeENdk1FY8ClYfpYxCDH
Pm5NzL/f54VtdZ3aL1fKmYwWN7WFJT4FH3l6DOvtCc+Gx3KW1a3Y508CbqYBXvgY
QV4oH4Y=
=iSoY
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc6' into for-linus
Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.
If cros_ec_keyb_register_matrix() isn't called (due to
`buttons_switches_only`) in cros_ec_keyb_probe(), `ckdev->idev` remains
NULL. An invalid memory access is observed in cros_ec_keyb_process()
when receiving an EC_MKBP_EVENT_KEY_MATRIX event in cros_ec_keyb_work()
in such case.
Unable to handle kernel read from unreadable memory at virtual address 0000000000000028
...
x3 : 0000000000000000 x2 : 0000000000000000
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
input_event
cros_ec_keyb_work
blocking_notifier_call_chain
ec_irq_thread
It's still unknown about why the kernel receives such malformed event,
in any cases, the kernel shouldn't access `ckdev->idev` and friends if
the driver doesn't intend to initialize them.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20251104070310.3212712-1-tzungbi@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is supposed to be "priv" but we accidentally pass "&priv" which is
an address in the stack and so it will lead to memory corruption when
the imx_sc_key_action() function is called. Remove the &.
Fixes: 768062fd12 ("Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/aQYKR75r2VMFJutT@stanley.mountain
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for the onkey of the pf1550 PMIC.
Signed-off-by: Samuel Kayode <samuel.kayode@savoirfairelinux.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20251001-pf1550-v12-4-a3302aa41687@savoirfairelinux.com
Signed-off-by: Lee Jones <lee@kernel.org>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just
return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://patch.msgid.link/20250822034751.244248-3-zhao.xichao@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just
return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://patch.msgid.link/20250822034751.244248-2-zhao.xichao@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the pegasus_notetaker driver, the pegasus_probe() function allocates
the URB transfer buffer using the wMaxPacketSize value from
the endpoint descriptor. An attacker can use a malicious USB descriptor
to force the allocation of a very small buffer.
Subsequently, if the device sends an interrupt packet with a specific
pattern (e.g., where the first byte is 0x80 or 0x42),
the pegasus_parse_packet() function parses the packet without checking
the allocated buffer size. This leads to an out-of-bounds memory access.
Fixes: 1afca2b66a ("Input: add Pegasus Notetaker tablet driver")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://lore.kernel.org/r/20251007214131.3737115-2-eeodqql09@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR()
This patch fixes this cocci report:
./cyttsp5.c:927:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20251013-ptr_err-v1-1-2c5efbd82952@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The reset line is being set to input on non-ACPI devices apparently to
save power. This isn't being done on ACPI devices as it's been found
that some ACPI devices don't have a pull-up resistor fitted. This can
also be the case for non-ACPI devices, resulting in:
[ 941.672207] Goodix-TS 1-0014: Error reading 10 bytes from 0x814e: -110
[ 942.696168] Goodix-TS 1-0014: Error reading 10 bytes from 0x814e: -110
[ 945.832208] Goodix-TS 1-0014: Error reading 10 bytes from 0x814e: -110
This behaviour appears to have been initialing introduced in
ec6e1b4082. This doesn't seem to be based on information in either the
GT911 or GT9271 datasheets cited as sources of information for this
change. Thus it seems likely that it is based on functionality in the
Android driver which it also lists. This behaviour may be viable in very
specific instances where the hardware is well known, but seems unwise in
the upstream kernel where such hardware requirements can't be
guaranteed.
Remove this over optimisation to improve reliability on non-ACPI
devices.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20251009134138.686215-1-martyn.welch@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a number of conversions to yaml/json schema and fixes for
input-related device tree bindings
- a new driver for Awinic AW86927 haptic chip
- a new driver for Hynitron CST816x series controller
- a new driver for add Himax HX852x(ES) touchscreen controller
- a fix to uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- a fix to prevent overflow in pressure calculation in tsc2007 driver
causing phantom touches
- a change to Atmel maxTouch driver to support generic touchscreen
configuration (flip, rotate, etc.)
- support for platform data was dropped in tca8418_keypad,
pxa27x-keypad, spear-keyboard and twl4030_keypad drivers, they all
now rely on generic device properties for configuration
- other assorted changes and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaOX1HQAKCRBAj56VGEWX
nC29AQCsDm6HBKXJZl6nAI8WHQiSvASFvyFlF6scVnfueX54mQEA6eE428+Cr1Sn
mDiwL38Es+PlZbdsi0J2q0vYzpr4yQU=
=JZIn
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
The reset GPIO is not toggled in any critical section where it couldn't
sleep, allow the reset GPIO to sleep. This allows the driver to operate
reset GPIOs connected to I2C GPIO expanders.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://lore.kernel.org/r/20251005023335.166483-1-marek.vasut@mailbox.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmjkpakTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXip5B/48MvTFJ1qwRGPVzevZQ8Z4SDogEREp
69VS/xRf1YCIzyXyanwqf1dXLq8NAqicSp6ewpJAmNA55/9O0cwT2EtohjeGCu61
krPIvS3KT7xI0uSEniBdhBtALYBscnQ0e3cAbLNzL7bwA6Q6OmvoIawpBADgE/cW
aZNCK9jy+WUqtXc6lNtkJtST0HWGDn0h04o2hjqIkZ+7ewjuEEJBUUB/JZwJ41Od
UxbID0PAcn9O4n/u/Y/GH65MX+ddrdCgPHEGCLAGAKT24lou3NzVv445OuCw0c4W
ilALIRb9iea56ZLVBW5O82+7g9Ag41LGq+841MNlZjeRNONGykaUpTWZ
=OR26
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Unify guest entry code for KVM and MSHV (Sean Christopherson)
- Switch Hyper-V MSI domain to use msi_create_parent_irq_domain()
(Nam Cao)
- Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV
(Mukesh Rathor)
- Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov)
- Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna
Kumar T S M)
- Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari,
Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley)
* tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyperv: Remove the spurious null directive line
MAINTAINERS: Mark hyperv_fb driver Obsolete
fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver
Drivers: hv: Make CONFIG_HYPERV bool
Drivers: hv: Add CONFIG_HYPERV_VMBUS option
Drivers: hv: vmbus: Fix typos in vmbus_drv.c
Drivers: hv: vmbus: Fix sysfs output format for ring buffer index
Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store()
x86/hyperv: Switch to msi_create_parent_irq_domain()
mshv: Use common "entry virt" APIs to do work in root before running guest
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
mshv: Handle NEED_RESCHED_LAZY before transferring to guest
x86/hyperv: Add kexec/kdump support on Azure CVMs
Drivers: hv: Simplify data structures for VMBus channel close message
Drivers: hv: util: Cosmetic changes for hv_utils_transport.c
mshv: Add support for a new parent partition configuration
clocksource: hyper-v: Skip unnecessary checks for the root partition
hyperv: Add missing field to hv_output_map_device_interrupt
-----BEGIN PGP SIGNATURE-----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=8Nwa
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- haptic touchpad support (Angela Czubak and Jonathan Denose)
- support for audio jack handling on DualSense Playstation controllers
(Cristian Ciocaltea)
- allow HID-BPF to rebind a driver to hid-multitouch (Benjamin
Tissoires)
- rework hidraw ioctls to make them safer (and tested) (Benjamin
Tissoires)
- various PIDFF and universal-PIDFF fixes/improvements (Tomasz Pakuła)
- better configuration of Intel QuickI2C through ACPI (Xinpeng Sun)
- other assorted cleanups and fixes
* tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (58 commits)
HID: playstation: Switch to scoped_guard() in {dualsense|dualshock4}_output_worker()
HID: playstation: Silence sparse warnings for locking context imbalances
HID: playstation: Update SP preamp gain comment line
HID: intel-thc-hid: intel-quicki2c: support ACPI config for advanced features
HID: core: Change hid_driver to use a const char* for name
HID: hidraw: tighten ioctl command parsing
selftests/hid: hidraw: forge wrong ioctls and tests them
selftests/hid: hidraw: add more coverage for hidraw ioctls
selftests/hid: update vmtest.sh for virtme-ng
HID: playstation: Support DualSense audio jack event reporting
HID: playstation: Support DualSense audio jack hotplug detection
HID: playstation: Redefine DualSense input report status field
HID: playstation: Prefer kzalloc(sizeof(*buf)...)
HID: playstation: Document spinlock_t usage
HID: playstation: Fix all alignment and line length issues
HID: playstation: Correct spelling in comment sections
HID: playstation: Replace uint{32,16,8}_t with u{32,16,8}
HID: playstation: Simplify locking with guard() and scoped_guard()
HID: playstation: Add spaces around arithmetic operators
HID: playstation: Make use of bitfield macros
...
This round of updates contains a fair amount of new device support, a couple of fixes and
some refactoring. The most notable additions include new drivers for Loongson's Security
Engine, RNG and TPM, new drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a refactoring to use a more modern
GPIO API for the VEXPRESS sysreg driver, the removal of a deprecated IRQ ACK function from the
MC13xxx RTC driver and a new DT binding for the aforementioned TI BQ257xx charger.
New Support & Features
- Add a suite of drivers for the Loongson Security Engine, including the core controller, a
Random Number Generator (RNG) and Trusted Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including the input driver, MFD
cell registration, and a system power-off handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs, including the core MFD
driver and a power supply driver for the charger functionality.
Improvements & Fixes
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS sysreg driver to prevent
potential silent failures.
Cleanups & Refactoring
- Add a MAINTAINERS entry for the new Loongson Security Engine drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO chip API.
Removals
- Remove the deprecated and unused mc13xxx_irq_ack() function from the MC13xxx RTC, input and
touchscreen drivers.
Device Tree Bindings Updates
- Add device tree bindings for the TI BQ25703A charger.
-----BEGIN PGP SIGNATURE-----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=h21C
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"This round of updates contains a fair amount of new device support, a
couple of fixes and some refactoring. The most notable additions
include new drivers for Loongson's Security Engine, RNG and TPM, new
drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a
refactoring to use a more modern GPIO API for the VEXPRESS sysreg
driver, the removal of a deprecated IRQ ACK function from the MC13xxx
RTC driver and a new DT binding for the aforementioned TI BQ257xx
charger.
New Support & Features:
- Add a suite of drivers for the Loongson Security Engine, including
the core controller, a Random Number Generator (RNG) and Trusted
Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including
the input driver, MFD cell registration, and a system power-off
handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs,
including the core MFD driver and a power supply driver for the
charger functionality.
Improvements & Fixes:
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS
sysreg driver to prevent potential silent failures.
Cleanups & Refactoring:
- Add a MAINTAINERS entry for the new Loongson Security Engine
drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO
chip API.
Removals:
- Remove the deprecated and unused mc13xxx_irq_ack() function from
the MC13xxx RTC, input and touchscreen drivers.
Device Tree Bindings Updates:
- Add device tree bindings for the TI BQ25703A charger"
* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
dt-bindings: watchdog: Add SMARC-sAM67 support
dt-bindings: mfd: tps6594: Allow gpio-line-names
mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
mfd: 88pm886: Add GPADC cell
mfd: vexpress-sysreg: Use more common syntax for compound literals
mfd: rz-mtu3: Fix MTU5 NFCR register offset
mfd: max77705: Setup the core driver as an interrupt controller
mfd: cs42l43: Remove IRQ masking in suspend
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
mfd: bd71828, bd71815: Prepare for power-supply support
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
dt-bindings: mfd: fsl,mc13xxx: Add buttons node
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
mfd: macsmc: Add "apple,t8103-smc" compatible
...
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder API
to other in-kernel users (to enable merging of a new pinctrl driver
that uses it)
- convert all remaining drivers to using the modernized generic GPIO chip
API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve its
support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO drivers
that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled with
COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding
-----BEGIN PGP SIGNATURE-----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=TZ1G
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and support for more models in existing
ones.
The generic GPIO API has been reworked and all users converted
which allowed us to move the fields specific to the generic GPIO
implementation out of the high-level struct gpio_chip into its own
structure that wraps the gpio_chip.
Other than that, there's nothing too exciting. Mostly minor tweaks and
fixes all over the place, some refactoring and some small new features
in helper modules.
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and
pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder
API to other in-kernel users (to enable merging of a new pinctrl
driver that uses it)
- convert all remaining drivers to using the modernized generic GPIO
chip API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve
its support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO
drivers that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better
readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled
with COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding"
* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
gpio: mpfs: fix setting gpio direction to output
gpio: generic: move GPIO_GENERIC_ flags to the correct header
gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
gpio: nomadik: fix the debugfs helper stub
MAINTAINERS: Add entry on MAX7360 driver
input: misc: Add support for MAX7360 rotary
input: keyboard: Add support for MAX7360 keypad
gpio: max7360: Add MAX7360 gpio support
gpio: regmap: Allow to provide init_valid_mask callback
gpio: regmap: Allow to allocate regmap-irq device
pwm: max7360: Add MAX7360 PWM support
pinctrl: Add MAX7360 pinctrl driver
mfd: Add max7360 support
dt-bindings: mfd: gpio: Add MAX7360
rtc: Add Nuvoton NCT6694 RTC support
hwmon: Add Nuvoton NCT6694 HWMON support
watchdog: Add Nuvoton NCT6694 WDT support
can: Add Nuvoton NCT6694 CANFD support
i2c: Add Nuvoton NCT6694 I2C support
gpio: Add Nuvoton NCT6694 GPIO support
...
* New
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready.
* Improvements
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning.
- Defer probe until parent EC device is ready in cros_ec_keyb.
* Cleanups
- Remove redundant and simplify code in cros_ec_chardev.
- Centralize cros_ec_device allocation and initialization to remove
duplicate code.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCaNku+BMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0DFkA/0+FF785x38lKTlAnJMSlNcABwYzsi9Z
b70Yc2ytNzp8AP9x5gk68EdwkLF97Mu08JvL8ZUPL6z5jQ3PPd96QDcrCg==
=zRIv
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready
Improvements:
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning
- Defer probe until parent EC device is ready in cros_ec_keyb
Cleanups:
- Remove redundant and simplify code in cros_ec_chardev
- Centralize cros_ec_device allocation and initialization to remove
duplicate code"
* tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
Input: cros_ec_keyb - Defer probe until parent EC device is registered
platform/chrome: cros_ec: Add a flag to track registration state
platform/chrome: cros_ec: Separate initialization from cros_ec_register()
platform/chrome: Centralize common cros_ec_device initialization
platform/chrome: Centralize cros_ec_device allocation
platform/chrome: wilco_ec: Remove redundant semicolons
platform/chrome: cros_ec: Avoid -Wflex-array-member-not-at-end warning
platform/chrome: cros_ec_chardev: Decouple fops from struct cros_ec_dev
platform/chrome: cros_ec_chardev: Remove redundant struct field
At present VMBus driver is hinged off of CONFIG_HYPERV which entails
lot of builtin code and encompasses too much. It's not always clear
what depends on builtin hv code and what depends on VMBus. Setting
CONFIG_HYPERV as a module and fudging the Makefile to switch to builtin
adds even more confusion. VMBus is an independent module and should have
its own config option. Also, there are scenarios like baremetal dom0/root
where support is built in with CONFIG_HYPERV but without VMBus. Lastly,
there are more features coming down that use CONFIG_HYPERV and add more
dependencies on it.
So, create a fine grained HYPERV_VMBUS option and update Kconfigs for
dependency on VMBus.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The probe function in the psxpad-spi driver calls spi_setup()
but fails to check its return value. If the SPI bus setup fails,
the driver will still load successfully, resulting in potential
error in later I/O operations.
Add a check for the return value of spi_setup() and return
an error on failure.
Fixes: 8be193c7b1 ("Input: add support for PlayStation 1/2 joypads connected via SPI")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Struct ff_effect_compat is embedded twice inside
uinput_ff_upload_compat, contains internal padding. In particular, there
is a hole after struct ff_replay to satisfy alignment requirements for
the following union member. Without clearing the structure,
copy_to_user() may leak stack data to userspace.
Initialize ff_up_compat to zero before filling valid fields.
Fixes: 2d56f3a32c ("Input: refactor evdev 32bit compat to be shareable with uinput")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://lore.kernel.org/r/20250928063737.74590-1-zhen.ni@easystack.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for the I2C-connected Awinic AW86927 LRA haptic driver.
This driver includes a hardcoded sine waveform to be uploaded to the
AW86927's SRAM for haptic playback.
This driver does not currently support all the capabilities of the
AW86927, such as F0 calibration, RTP mode, and CONT mode.
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Link: https://lore.kernel.org/r/20250925-aw86927-v3-2-1fc6265b42de@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
'Resin' (*Res*et *In*put) is usually connected to a volume down button
on devices, which is usually not expected to wake up the device from
suspend.
On the other hand, pwrkey should keep wakeup on. So do not enable wakeup
for resin unless the "wakeup-source" property is specified in
devicetree.
Note, that this does change behavior by turning off wakeup by default
for 'resin' and requiring a new dt property to be added to turn it on
again. But since this is not expected behavior in the first place, and
most users will not expect this, I'd argue this change is acceptable.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250909-resin-wakeup-v1-2-46159940e02b@lucaweiss.eu
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Introduce support for the Hynitron CST816x series touchscreen controller
used for 240×240 1.28-inch Round LCD Display Module manufactured
by Waveshare Electronics. The driver is designed based on an Arduino
implementation marked as under MIT License. This driver is written
for a particular round display based on the CST816S controller, which
is not compatiable with existing driver for Hynitron controllers.
Signed-off-by: Oleh Kuzhylnyi <kuzhylol@gmail.com>
Link: https://lore.kernel.org/r/20250921125939.249788-2-kuzhylol@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Set the glitch threshold by DTS property and keep the existing default
behavior if the 'debounce-delay-us' is not present.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250923143746.2857292-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
"The data line must be sampled" makes much more sense than what was
previously written, and given that "s" and "d" are neighbors on the
QWERTY keybord, it was probably a typo.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250923-ps2-typo-v1-1-03d2468acc32@posteo.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This provides support for generic touchscreen configuration options like
swapped-x-y, min-x, min-y, size-x, size-y, etc.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250909054903.11519-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Support for platform data from dropped from twl in 4a346a03a6 ("mfd:
twl: Remove platform data support") and board files were dropped even
earlier. There are no in-kernel users of twl4030_keypad_data in the
kernel, and the driver supports configuration via generic device
properties.
Drop support of static platform data from the keypad driver.
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/tica7ol7xwv5tqb7hlkzu6wkiv4quxwrpqv6croe4wfnwvj6wv@4ob6ktqqi3cr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a simple driver for the Himax HX852x(ES) touch panel controller,
with support for multi-touch and capacitive touch keys.
The driver is somewhat based on sample code from Himax. However, that
code was rather confusing, so that we spent a significant amount of
time just trying to understand the packet format and register commands.
In this driver they are described with clean structs and defines rather
than magic numbers and offset calculations.
Co-developed-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20250915-hx852x-v5-2-b938182f1056@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=fwWe
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-input-pinctrl-pwm-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Sync up with MFD tree to bring in support for MAX7360.
Add driver for Maxim Integrated MAX7360 keypad controller, providing
support for up to 64 keys, with a matrix of 8 columns and 8 rows.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-8-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add a flag to generate ABS_PRESSURE as sum of ABS_MT_PRESSURE across
all slots.
This flag should be set if one knows a device reports true force and would
like to report total force to the userspace.
Signed-off-by: Angela Czubak <aczubak@google.com>
Co-developed-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jonathan Denose <jdenose@google.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
- a quirk to i8042 for yet another TUXEDO laptop
- a fix to mtk-pmic-keys driver to properly handle MT6359
- a fix to iqs7222 driver to only enable proximity interrupt if it is
mapper to a key or a switch event
- an update to xpad controller driver to recognize Flydigi Apex 5
controller
- an update to maintainers file to drop bounding entry for Melfas touch
controller.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaMYYKAAKCRBAj56VGEWX
nOvAAP9IkaFQyTC8hWVUU8w6Q5gC7+pF3lccnOckdDxvoY6kVAEAsQMz8J4Df7ZK
OEaOPUCzWn5mcrAR74+LGXqGgRYGAwk=
=ctHa
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a quirk to i8042 for yet another TUXEDO laptop
- a fix to mtk-pmic-keys driver to properly handle MT6359
- a fix to iqs7222 driver to only enable proximity interrupt
if it is mapped to a key or a switch event
- an update to xpad controller driver to recognize Flydigi Apex 5
controller
- an update to maintainers file to drop bounding entry for Melfas
touch controller
* tag 'input-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Input: Drop melfas-mip4 section
Input: mtk-pmic-keys - MT6359 has a specific release irq
Input: i8042 - add TUXEDO InfinityBook Pro Gen10 AMD to i8042 quirk table
Input: iqs7222 - avoid enabling unused interrupts
Input: xpad - add support for Flydigi Apex 5
The `cros_ec_keyb` driver can be probed before the cros_ec_device has
completed the registration. This creates a race condition where
`cros_ec_keyb` might access uninitialized data.
Fix this by calling `cros_ec_device_registered()` to check the parent's
status. If the device is not yet ready, return -EPROBE_DEFER to ensure
the probe is retried later.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250828083601.856083-6-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
mc13xxx_irq_ack() got deprecated and became dead code with commit
10f9edaeaa ("mfd: mc13xxx: Use regmap irq framework for interrupts").
It should be safe to remove it now.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://lore.kernel.org/r/20250811064358.1659-1-akurz@blala.de
Signed-off-by: Lee Jones <lee@kernel.org>
There are no in-kernel users of spear kbd_platform_data in the kernel,
and the driver supports configuration via device tree, so drop
support of static platform data and move properties parsing from
OF-specific methods to generic ones.
Link: https://lore.kernel.org/r/vppjxui76im26uamznx7evm5lmbe3d6v3oxsa7mqyytykh4zm6@nhlf33v3hp6g
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no in-kernel users of pxa27x_keypad_platform_data in the
kernel, and the driver supports configuration via device tree, so drop
support of static platform data and move properties parsing from
OF-specific methods to generic ones.
Link: https://lore.kernel.org/r/20250817215316.1872689-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Support for MT6359 PMIC keys has been added recently. However, the key
release event is not properly handled: only key press events are
generated, leaving key states stuck in "pressed".
This patch ensures that both key press and key release events are
properly emitted by handling the release logic correctly.
Introduce a 'key_release_irq' member to the 'mtk_pmic_regs' to identify
the devices that have a separate irq for the release event.
Fixes: bc25e6bf03 ("Input: mtk-pmic-keys - add support for MT6359 PMIC keys")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/r/20250905-radxa-nio-12-l-gpio-v3-1-40f11377fb55@collabora.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Occasionally wakes up from suspend with missing input on the internal
keyboard. Setting the quirks appears to fix the issue for this device as
well.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250826142646.13516-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If a proximity event node is defined so as to specify the wake-up
properties of the touch surface, the proximity event interrupt is
enabled unconditionally. This may result in unwanted interrupts.
Solve this problem by enabling the interrupt only if the event is
mapped to a key or switch code.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aKJxxgEWpNaNcUaW@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The touch resistance calculation in the tsc2007 driver is prone to
overflow if (z2 - z1) is large and also x is reasonably big. This
overflow results in the driver emitting input events when very little
touch pressure is applied. In these events the x and y coordinates can
be substantially off.
Avoid the overflow by using u64 when calculating resistance value.
Signed-off-by: Johannes Kirchmair <johannes.kirchmair@skidata.com>
Link: https://lore.kernel.org/r/20250129-fix_tsc_calculation_overflow-v2-1-9e51333496ad@skidata.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In case tsc2007 is used as an ADC sensor there will be no interrupt
provided at all, so set up an interrupt only if one is present.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since pen GPIO request is optional, there is no reason to throw dev_warn if
such GPIO is not defined.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-2-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=VecX
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-input-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Sync up with MFD tree to bring in support for tps6594.
TPS6594 defines two interrupts for the power button one for push and
one for release.
This driver is very simple in that it maps the push interrupt to a key
input and the release interrupt to a key release.
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250826134631.1499936-2-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
A number of modules in the input subsystem use EXPORT_SYMBOL() and
friends without explicitly including the corresponding header
<linux/export.h>. While the build currently succeeds due to this header
being pulled in transitively, this is not guaranteed to be the case in
the future.
Let's add the explicit include to make the dependencies clear and
prevent future build breakage.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The input_bits_to_string() function has special handling for compat
tasks, formatting the output as a sequence of 32-bit hex values. To
better isolate compatibility-related code, move it from
drivers/input/input.c to drivers/input/input-compat.c.
No functional change intended.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmiiVhIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGehcH/1jKJr34F+6Y+due
gW76qTh9BrVq4KjKecQwOxtyN40oRLGR5389CUlQPEWk6jFqRVZ57ShZPElgpxFm
gavwu9NlYEKr1VvWTJFMwXPghzRBnOBG6Ml+LXrcwHbCEi8otvFOGJcPe5gRQcW9
GJV2cdxrZkCqSpy1ZpWJJ4d2gTc24mzvQvkaJrY/YfHgZGG77GL03qk8t2lXHgBN
YbYUsgOXn6rVmzaS13ahJbQvj6ixKKWuVbm4fWOw0KFjyuV6K/U1CTOtNcUZrVkW
cwIbQ5mDVUF7UDwmEAsnTn4iYgazwYfhmE8UvuP65uXPyyZrNojvaGfUX9J9/moT
+gx2P1Q=
=s9HD
-----END PGP SIGNATURE-----
Merge tag 'v6.17-rc2' into HEAD
Sync up with mainline to bring in changes to include/linux/sprintf.h
With kernel supporting deferred probing there is no longer need to play
games with different initcall levels trying to influence probe order.
Switch the driver to use standard module_i2c_driver() to register the
driver.
Link: https://lore.kernel.org/r/dhb2wzrhspbjh2gbt3iny7odsrpq2bbqldq276zuxwc4bnhgbl@qkbxj6yrihqv
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
- updates to several drivers consuming GPIO APIs to use setters
returning error codes
- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver
- an update to AT/PS2 keyboard driver to map F13-F24 by default
- Samsung keypad driver got a facelift
- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info
- 2 new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver
- support for polling mode in Goodix touchscreen driver
- support for support for FocalTech FT8716 in edt-ft5x06 driver
- support for MT6359 in mtk-pmic-keys driver
- removal of pcf50633-input driver since platform it was used on is gone
- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers
- a new definition for "performance" key
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaJOUOwAKCRBAj56VGEWX
nPJTAQC1hrYgCv1L8hxUukbGH5FFPF2nlk63U78izh/dd7R9fwD+OqrQT7+IEr/5
VBqxiqdy77R1mmYs8RpmjOSTg0MEwwg=
=jm8o
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- updates to several drivers consuming GPIO APIs to use setters
returning error codes
- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver
- an update to AT/PS2 keyboard driver to map F13-F24 by default
- Samsung keypad driver got a facelift
- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info
- two new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver
- support for polling mode in Goodix touchscreen driver
- support for support for FocalTech FT8716 in edt-ft5x06 driver
- support for MT6359 in mtk-pmic-keys driver
- removal of pcf50633-input driver since platform it was used on is
gone
- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers
- a new definition for "performance" key
* tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (38 commits)
HID: hid-steam: Use new BTN_GRIP* buttons
Input: add keycode for performance mode key
Input: max77693 - convert to atomic pwm operation
Input: st1232 - add touch-overlay handling
dt-bindings: input: touchscreen: st1232: add touch-overlay example
Input: touch-overlay - add touchscreen overlay handling
dt-bindings: touchscreen: add touch-overlay property
Input: atkbd - correctly map F13 - F24
Input: xpad - use new BTN_GRIP* buttons
Input: Add and document BTN_GRIP*
Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_*
Documentation: Fix capitalization of XBox -> Xbox
Input: synaptics-rmi4 - add support for F1A
dt-bindings: input: syna,rmi4: Document F1A function
Input: synaptics-rmi4 - add support for Forcepads (F21)
Input: mtk-pmic-keys - add support for MT6359 PMIC keys
Input: remove special handling of id->driver_info when matching
Input: evdev - switch matching to EV_SYN
Input: samsung-keypad - use BIT() and GENMASK() where appropriate
Input: samsung-keypad - use per-chip parameters
...
-----BEGIN PGP SIGNATURE-----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=Vo0F
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.
The driver called pwm_config() and pwm_enable() separately. Today both
are wrappers for pwm_apply_might_sleep() and it's more effective to call
this function directly and only once. Also don't configure the
duty_cycle and period if the next operation is to disable the PWM so
configure the PWM in max77693_haptic_enable().
With the direct use of pwm_apply_might_sleep() the need to call
pwm_apply_args() in .probe() is now gone, too, so drop this one.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250630103851.2069952-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- DEBUGFS
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
- SYSFS
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
- Support cache-ids for device-tree systems
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
- Rust
- Device
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
- Misc
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaIjkhwAKCRBFlHeO1qrK
LpXuAP9RWwfD9ZGgQZ9OsMk/0pZ2mDclaK97jcmI9TAeSxeZMgD1FHnOMTY7oSIi
iG7Muq0yLD+A5gk9HUnMUnFNrngWCg==
=jgRj
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose the
global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the existing
interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more users
- start the process of allowing to compile-out the legacy parts of the
GPIO core for users who don't need it by introducing a new Kconfig
option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio helper
out of the core struct gpio_chip into their own structure that wraps
it: create a new header with modern interfaces and convert several
drivers to using it
- remove the platform data structure associated with the gpio-mmio helper
from the kernel after having converted all remaining users to generic
device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value setter
callbacks
- convert gpio-rcar to using simple device power management ops callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already handles
that
- also drop unneeded GPIO range checks in drivers, the core already makes
sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the user
wants to change direction of the pin to output even though these
drivers don't need to do anything else to actually set the direction,
otherwise a call like gpiod_direction_output(d, 1) will not result in
the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases where
the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different devices
to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of simple
hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the arguments
in some functions, remove duplicate includes, etc.
- documentation updates
-----BEGIN PGP SIGNATURE-----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=tUPm
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver (Apple SMC) and extensions to existing drivers
for supporting new HW models. A lot of different impovements across
drivers and in core GPIO code. Details on that are in the signed tag
as usual.
We managed to remove some of the legacy APIs. Arnd Bergmann started to
work on making the legacy bits optional so that we may compile them
only for older platforms that still really need them.
Rob Herring has done a lot of work to convert legacy .txt dt-bindings
for GPIO controllers to YAML. There are only a few left now in the
GPIO tree.
A big part of the commits in this PR concern the conversion of GPIO
drivers to using the new line value setter callbacks. This conversion
is now complete treewide (unless I've missed something) and once all
the changes from different trees land in mainline, I'll send you
another PR containing a commit dropping the legacy callbacks from the
tree.
As the quest to pay back technical dept never really ends, we're
starting another set of interface conversions, this time it's about
moving fields specific to only a handful of drivers using the
gpio-mmio helper out of the core gpio_chip structure that every
controller implements and uses. This cycle we introduce a new set of
APIs and convert a few drivers under drivers/gpio/, next cycle we'll
convert remaining modules treewide (in gpio, pinctrl and mfd trees)
and finally remove the old interfaces and move the gpio-mmio fields
into their own structure wrapping gpio_chip.
One last change I should mention here is the rework of the sysfs
interface. In 2016, we introduced the GPIO character device as the
preferred alternative to the sysfs class under /sys/class/gpio. While
it has seen a wide adoption with the help of its user-space
counterpart - libgpiod - there are still users who prefer the
simplicity of sysfs.
As far as the GPIO subsystem is concerned, the problem is not the
existince of the GPIO class as such but rather the fact that it
exposes the global GPIO numbers to the user-space, stopping us from
ever being able to remove the numberspace from the kernel. To that
end, this release we introduced a parallel, limited sysfs interface
that doesn't expose these numbers and only implements a subset of
features that are relevant to the existing users. This is a result of
several discussions over the course of last year and should allow us
to remove the legacy part some time in the future.
Summary:
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose
the global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the
existing interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more
users
- start the process of allowing to compile-out the legacy parts of
the GPIO core for users who don't need it by introducing a new
Kconfig option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio
helper out of the core struct gpio_chip into their own structure
that wraps it: create a new header with modern interfaces and
convert several drivers to using it
- remove the platform data structure associated with the gpio-mmio
helper from the kernel after having converted all remaining users
to generic device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value
setter callbacks
- convert gpio-rcar to using simple device power management ops
callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already
handles that
- also drop unneeded GPIO range checks in drivers, the core already
makes sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the
user wants to change direction of the pin to output even though
these drivers don't need to do anything else to actually set the
direction, otherwise a call like gpiod_direction_output(d, 1) will
not result in the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases
where the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in
gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different
devices to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of
simple hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the
arguments in some functions, remove duplicate includes, etc.
- documentation updates"
* tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits)
MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips
gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB
gpio: virtio: Fix config space reading.
gpiolib: make legacy interfaces optional
dt-bindings: gpio: rockchip: Allow use of a power-domain
gpiolib: of: add forward declaration for struct device_node
power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC
gpio: Add new gpio-macsmc driver for Apple Macs
mfd: Add Apple Silicon System Management Controller
soc: apple: rtkit: Make shmem_destroy optional
dt-bindings: mfd: Add Apple Mac System Management Controller
dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller
dt-bindings: gpio: Add Apple Mac SMC GPIO block
gpio: cadence: Remove duplicated include in gpio-cadence.c
gpio: tps65219: Add support for TI TPS65214 PMIC
gpio: tps65219: Update _IDX & _OFFSET macro prefix
gpio: sysfs: Fix an end of loop test in gpiod_unexport()
dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema
dt-bindings: gpio: Convert maxim,max3191x to DT schema
dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles
...
Use touch-overlay to support overlay objects such as buttons and a
resized frame defined in the device tree.
A key event will be generated if the coordinates of a touch event are
within the area defined by the button properties.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-4-b292a1bbb0a1@wolfvision.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some touch devices provide mechanical overlays with different objects
like buttons or clipped touchscreen surfaces.
In order to support these objects, add a series of helper functions
to the input subsystem to transform them into overlay objects via
device tree nodes.
These overlay objects consume the raw touch events and report the
expected input events depending on the object properties.
Note that the current implementation allows for multiple definitions
of touchscreen areas (regions that report touch events), but only the
first one will be used for the touchscreen device that the consumers
typically provide.
Should the need for multiple touchscreen areas arise, additional
touchscreen devices would be required at the consumer side.
There is no limitation in the number of touch areas defined as buttons.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-2-b292a1bbb0a1@wolfvision.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently only F23 is correctly mapped for PS/2 keyboards.
According to this table:
https://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/translate.pdf
- F24 and Zenkaku/Hankaku share the same scancode, but since in real world
Zenkaku/Hankaku keys seem to just use the tilde scancode, this patch binds the
scancode to F24. Note that on userspace side the KEY_ZENKAKUHANKAKU keycode is
currently not bound in xkeyboard-config, so it is (mostly*) unused anyway.
* Qt on Wayland and therefore KDE on Wayland can see the keypress anyway for
some reason and it is actually used in a touchpad toggle shortcut, but this is
currently being fixed in both KDE and xkeyboard-config to make this less weird,
so it could directly be fixed to correctly handle the F24 keypress instead.
- The scancodes for F13-F22 are currently unmapped so there will probably be no
harm in mapping them. This would also fix the issue that some of these keys
can't be mapped as the target from userspace using the `setkeycodes` command.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250722120438.28011-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since dance pads can have both up/down or left/right pressed at the same time,
by design, they are not suitable for mapping the buttons to axes. Historically,
this driver mapped the D-pad to BTN_TRIGGER_HAPPY1-4 in these cases, and before
that as mouse buttons. However, BTN_DPAD_* exists for this and makes far more
sense than the arbitrary mapping it was before.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250702034740.124817-1-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
RMI4 F1A implements capacitive keys. Add support for touch keys found in
some Synaptics touch controller configurations.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20250707-rmi4_f1a-v1-2-838d83c72e7f@apitzsch.eu
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Forcepad devices do not have physical buttons underneath the surface and
use F21 to report "clicks" based on touch pressure.
Signed-off-by: Marge Yang <Marge.Yang@tw.synaptics.com>
Link: https://lore.kernel.org/r/20250716033648.1785509-1-marge.yang@tw.synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- just a small fixup to xpad driver correcting recent addition of Acer
NGR200 controller
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaHx8kAAKCRBAj56VGEWX
nKUdAP0SiCkxOSiXNRc7Z8dhw+brN2iMxO4KUeapXhSqUCA5ngEAwstQ74tFqcki
ymEo2Nw3NI77Fk4IzSioBzJVXr4/agY=
=B+ny
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- just a small fixup to the xpad driver correcting the recent addition
of the Acer NGR200 controller
* tag 'input-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - set correct controller type for Acer NGR200
The controller should have been set as XTYPE_XBOX360 and not XTYPE_XBOX.
Also the entry is in the wrong place. Fix it.
Reported-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Link: https://lore.kernel.org/r/20250708033126.26216-2-niltonperimneto@gmail.com
Fixes: 22c69d786e ("Input: xpad - support Acer NGR 200 Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaGdm4wAKCRBAj56VGEWX
nJJxAPwMafYOIr+aW1+taLorp3FRyoFuh9Q4IZk9n3J2Dx/HGwD8CUpXDytgE+n7
BRMjXB7PPF9b35FjmKT8kTIHZxiTHAc=
=w9vL
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
* tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
Input: alps - use scnprintf() to suppress truncation warning
Input: iqs7222 - explicitly define number of external channels
Input: xpad - support Acer NGR 200 Controller
Input: xpad - return errors from xpad_try_sending_next_out_packet() up
Input: xpad - adjust error handling for disconnect
Input: apple_z2 - drop default ARCH_APPLE in Kconfig
Input: Fully open-code compatible for grepping
dt-bindings: HID: i2c-hid: elan: Introduce Elan eKTH8D18
Input: psmouse - switch to use scnprintf() to suppress truncation warning
Input: lifebook - switch to use scnprintf() to suppress truncation warning
Input: alps - switch to use scnprintf() to suppress truncation warning
Input: atkbd - switch to use scnprintf() to suppress truncation warning
Input: fsia6b - suppress buffer truncation warning for phys
Input: iqs626a - replace snprintf() with scnprintf()
The cs40l50_upload_owt() function allocates memory via kmalloc()
without checking for allocation failure, which could lead to a
NULL pointer dereference.
Return -ENOMEM in case allocation fails.
Signed-off-by: Yunshui Jiang <jiangyunshui@kylinos.cn>
Fixes: c38fe1bb5d ("Input: cs40l50 - Add support for the CS40L50 haptic driver")
Link: https://lore.kernel.org/r/20250704024010.2353841-1-jiangyunshui@kylinos.cn
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
evdev has switched to match on EV_SYN instead of relying on non-zero
driver_info field to allow matching to all devices. Remove special
handling from input core.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Each input device has EV_SYN capability. This is enforced by the input
core which sets this capability bit unconditionally in
input_register_device().
Switch evdev matching from declaring non-zero id->driver_info to match
on EV_SYN so that special handling can be removed from
input_match_device() and "driver_info" field can be removed from
input_device_id structure.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of doing conditional logic based on the chip type, define
per-chip parameter structure, and reference it in the match data
(either of_device_id or platform_device_id).
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240819045813.2154642-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation is more compact and ensures that the mutex will be
released when control leaves the function.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240819045813.2154642-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver uses devm API to allocate resources so there's no reason
to do allocations first and then check and release everything at once.
Check results immediately after doing allocation of each resource.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240819045813.2154642-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver uses devm_input_allocate_device() to allocate instances of
input device, which sets the parent appropriately. Remove extraneous
assignment.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240819045813.2154642-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch to using devm_clk_get_prepared() instead of combining
devm_clk_get() with clk_prepare(), which simplifies the code and
ensures that the clock is unprepared at the right time relative to
releasing other managed resources.
Link: https://lore.kernel.org/r/20240819045813.2154642-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The adp5589 support is based on legacy platform data and there's no
upstream platform using this device.
Moreover, recently, with
commit
480a8ad683 ("mfd: adp5585: Add Analog Devices ADP5585 core support")
we overlapped support for the adp5585 device (gpiochip part of it) but
since it actually makes sense for the device to be supported under MFD, we
can complement it and add the keymap support for it (properly based on FW
properties). And that is what
commit
04840c5363a6 ("Input: adp5585: Add Analog Devices ADP5585/89 support")
is doing.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-17-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ADP5585 is a 10/11 input/output port expander with a built in keypad
matrix decoder, programmable logic, reset generator, and PWM generator.
This driver supports the keyboard function using the platform device
registered by the core MFD driver.
The ADP5589 has 19 pins and also features an unlock function.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-16-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver is compatible with the FocalTech FT8716 touchscreen, which
supports up to 10 concurrent touch points. Add a compatible for it.
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250313202017.19621-3-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the custom directory in debugfs root. Further
improvements by this change: support of multiple instances.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318091904.22468-1-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
destroy_workqueue() already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250312072940.1429931-1-nichen@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Both pwm_config() and pwm_enable() are wrappers around
pwm_apply_might_sleep(). Instead of calling this function twice only
call it once without an intermediate step.
Setup the PWM in max8997_haptic_enable() only where it was enabled
historically. max8997_haptic_set_duty_cycle() is renamed accordingly to
make it clear this function is only about the internal setup now.
pwm_config() was called earlier back then, but that call has no effect
on the hardware when the PWM is disabled, so delaying this configuration
doesn't make a difference.
As pwm_apply_might_sleep() is used now defining the whole state of the
PWM, the call to pwm_apply_args() in .probe() can be dropped now, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250630093718.2062359-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The commit 76c968e75715 ("Input: alps - switch to use scnprintf() to suppress
truncation warning") converted one place in the driver while the other left
untouched. Convert the other place as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630082245.1416796-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The number of external channels is assumed to be a multiple of 10,
but this is not the case for IQS7222D. As a result, some CRx pins
are wrongly prevented from being assigned to some channels.
Address this problem by explicitly defining the number of external
channels for cases in which the number of external channels is not
equal to the total number of available channels.
Fixes: dd24e202ac ("Input: iqs7222 - add support for Azoteq IQS7222D")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aGHVf6HkyFZrzTPy@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are designs incorporating Goodix touch controller that do not
connect interrupt pin, for example Raspberry Pi. To support such systems
use polling mode for the input device when I2C client does not have
interrupt assigned to it.
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250522020418.1963422-1-qijian.guo@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-input-v1-3-5875240b48d8@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-input-v1-2-5875240b48d8@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-input-v1-1-5875240b48d8@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Not all errors that occur in xpad_try_sending_next_out_packet() are
IO errors. Pass up the error code to the caller so that it can
decide what to do.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250609014718.236827-3-superm1@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a device supporting xpad is disconnected it's expected that a
URB will fail to transmit.
Only show an error message when the error isn't -ENODEV.
Fixes: 7fc595f4c0 ("Input: xpad - correctly handle concurrent LED and FF requests")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250609014718.236827-2-superm1@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250612-apple-kconfig-defconfig-v1-8-0e6f9cb512c1@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It is very useful to find driver implementing compatibles with `git grep
compatible`, so driver should not use defines for that string, even if
this means string will be effectively duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250613071653.46809-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
W=1 builds warn that the data written to 'tc_name' is truncated for
theoretical strings such as "channel-2147483646".
Solve this problem by replacing snprintf() with scnprintf() so that
the return value corresponds to what was actually written.
In practice, the largest string that will be written is "channel-8",
and the return value is not actually evaluated. Instead, this patch
ultimately removes the warning without unnecessarily increasing the
size of 'tc_name' from 10 bytes.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412221136.0S4kRoCC-lkp@intel.com/
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z3rV8GTHxLyjBQ5I@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The "len" variable comes from the firmware and we generally do
trust firmware, but it's always better to double check. If the "len"
is too large it could result in memory corruption when we do
"memcpy(fragment->data, rec->data, len);"
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/131fd1ae92c828ee9f4fa2de03d8c210ae1f3524.1748463049.git.dan.carpenter@linaro.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
gpio_keys_irq_isr() and gpio_keys_irq_timer() access the same resources.
There could be a concurrent access if a GPIO interrupt occurs in parallel
of a HR timer interrupt.
Guard back those resources with a spinlock.
Fixes: 019002f20c ("Input: gpio-keys - use hrtimer for release timer")
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20250528-gpio_keys_preempt_rt-v2-2-3fc55a9c3619@foss.st.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in
hard irq context, but the input_event() takes a spin_lock, which isn't
allowed there as it is converted to a rt_spin_lock().
[ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0
...
[ 4054.290195] __might_resched+0x13c/0x1f4
[ 4054.290209] rt_spin_lock+0x54/0x11c
[ 4054.290219] input_event+0x48/0x80
[ 4054.290230] gpio_keys_irq_timer+0x4c/0x78
[ 4054.290243] __hrtimer_run_queues+0x1a4/0x438
[ 4054.290257] hrtimer_interrupt+0xe4/0x240
[ 4054.290269] arch_timer_handler_phys+0x2c/0x44
[ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c
[ 4054.290297] handle_irq_desc+0x40/0x58
[ 4054.290307] generic_handle_domain_irq+0x1c/0x28
[ 4054.290316] gic_handle_irq+0x44/0xcc
Considering the gpio_keys_irq_isr() can run in any context, e.g. it can
be threaded, it seems there's no point in requesting the timer isr to
run in hard irq context.
Relax the hrtimer not to use the hard context.
Fixes: 019002f20c ("Input: gpio-keys - use hrtimer for release timer")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20250528-gpio_keys_preempt_rt-v2-1-3fc55a9c3619@foss.st.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Sysfs interface for updating firmware for RMI devices is available even
when F34 probe fails. The code checks for presence of F34 "container"
pointer and then tries to use the function data attached to the
sub-device. F34 assigns the function data early, before it knows if
probe will succeed, leaving behind a stale pointer.
Fix this by expanding checks to not only test for presence of F34
"container" but also check if there is driver data assigned to the
sub-device, and call dev_set_drvdata() only after we are certain that
probe is successful.
This is not a complete fix, since F34 will be freed during firmware
update, so there is still a race when fetching and accessing this
pointer. This race will be addressed in follow-up changes.
Reported-by: Hanno Böck <hanno@hboeck.de>
Fixes: 29fd0ec2bd ("Input: synaptics-rmi4 - add support for F34 device reflash")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBlAl6sGulam-Qcx@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The keyboard is properly initialized by the firmware on Loongson
platform, so full reset of the keyboard is not needed. Switch the
default to avoid performing full reset of the keyboard.
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250401094154.11527-1-zhaoqunqin@loongson.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some Xbox One controllers will only start processing the init packets after
sending the GIP announce packet. While most controllers send this packet
immediately, others will delay for some time, e.g. if a dongle needs to connect
to an actual controller first. In those cases, we want to delay until we
receive the announce packet before sending the init sequence.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250513225411.2718072-2-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmghHIMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQP4H/0nzYeRJaWdhar4B
tb3tOUyHpokhqNpWYA+fSxq83H1yTuxv3PoHDJg1OEXfmwmfKS8+UelkBZX+fl/q
gfUz9CdmgMfXyXHw3jQnDGx6IwBDT5z3GfKbmFyzft8vqMyfGSGYmfdSaR+MZrD6
WxxCyNgPWGkT41MgvHW8JAH8Hj+yyzpu7uqx3LIS2KA3dJcxZGJUYC3uA2UBIuGD
CmTuWaG6zY4uTtiAOXUscKyA9wCh7cawTLJKAtc6SEpzAbMmZ3nUiOAVoKf70R0t
EqH16aToV+th/zUvCuPKT3bWIkiNxDsibtwfW9fIJ8aZnQuvO/bK4ygHXjy8C/vc
PUaWMIA=
=evf8
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc6' into next
Sync up with mainline to bring in xpad controller changes.
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell
Precision M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaCBDmQAKCRBAj56VGEWX
nA13AQCmVOo2PAJU2CtMxqwEVZMat0id/fk0Ro8aiW8JBzyzuwD/as/hMtOkAGyI
pUsaxLp7SlOUMq9YFlkbC/Ffe2GH2QQ=
=yrk/
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
A recent commit put one entry in the wrong place. This just moves it to the
right place.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-5-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This adds support for several new controllers, all of which include
Share buttons:
- HORI Drum controller
- PowerA Fusion Pro 4
- 8BitDo Ultimate 3-mode Controller
- Hyperkin DuchesS Xbox One controller
- PowerA MOGA XP-Ultra controller
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-4-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Two controllers -- Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's
Edge Official -- were missing the value of the mapping field, and thus
wouldn't detect properly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-1-vi@endrift.com
Fixes: 540602a43a ("Input: xpad - add a few new VID/PID combinations")
Fixes: 3492321e2e ("Input: xpad - add multiple supported devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To wake up the system from s2idle when pressing the power-button, let's
convert from using pm_wakeup_event() to pm_wakeup_dev_event(), as it allows
us to specify the "hard" in-parameter, which needs to be set for s2idle.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250306115021.797426-1-ulf.hansson@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Enable InterTouch mode on TUXEDO InfinityBook Pro 14 v5 by adding
"SYN1221" to the list of SMBus-enabled variants.
Add support for InterTouch on SYN1221 by adding it to the list of
SMBus-enabled variants.
Reported-by: Matthias Eilert <kernel.hias@eilert.tech>
Tested-by: Matthias Eilert <kernel.hias@eilert.tech>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB9597C033C4BC20EE2A0C4543B888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ 5.989588] psmouse serio1: synaptics: Your touchpad (PNP: TOS0213 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 6.039923] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.32, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x52d884, board id: 3322, fw id: 2658004
The board is labelled TM3322.
Present on the Toshiba / Dynabook Portege X30-D and possibly others.
Confirmed working well with psmouse.synaptics_intertouch=1 and local build.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB9597711E7933A08389FEC31DB888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The power-off time is configured in LPCR[17:16] BTN_PRESS_TIME:
* b00: 5 seconds (SoC default)
* b01: 10 seconds
* b10: 15 seconds
* b11: PMIC is not disabled
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://lore.kernel.org/r/20250315093455.1100-3-ian.ray@gehealthcare.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In mtk_pmic_keys_probe, the regs parameter is only set if the button is
parsed in the device tree. However, on hardware where the button is left
floating, that node will most likely be removed not to enable that
input. In that case the code will try to dereference a null pointer.
Let's use the regs struct instead as it is defined for all supported
platforms. Note that it is ok setting the key reg even if that latter is
disabled as the interrupt won't be enabled anyway.
Fixes: b581acb49a ("Input: mtk-pmic-keys - transfer per-key bit in mtk_pmic_keys_regs")
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The power control function ignores the "on" argument when setting the
report ID, and thus is always sending HID_POWER_SLEEP. This causes a
problem when trying to wakeup.
Fix by sending the state variable, which contains the proper HID_POWER_ON or
HID_POWER_SLEEP based on the "on" argument.
Fixes: 3c98b8dbdc ("Input: cyttsp5 - implement proper sleep and wakeup procedures")
Cc: stable@vger.kernel.org
Signed-off-by: Mikael Gonella-Bolduc <mgonellabolduc@dimonoff.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20250423135243.1261460-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When compile tested with W=1 on x86_64 with driver as built-in:
stmpe-ts.c:371:34: error: unused variable 'stmpe_ts_ids' [-Werror,-Wunused-const-variable]
Ideally this would be referenced from the platform_driver, but since
the compatible string is already matched by the mfd driver for its
parent device, that would break probing.
In this case, the of_device_id table just serves as a module alias
for loading the driver, while the device itself is probed using
the platform device name.
Remove the table and instead use a module alias that reflects how
the driver is actually probed.
Link: https://lore.kernel.org/lkml/20240403080702.3509288-8-arnd@kernel.org/
Link: https://lore.kernel.org/lkml/181dbdb8-c050-4966-8cb4-2f39495ff3f9@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250409122314.2848028-3-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
All of these cases are perfectly valid and good traditional C, but hit
by the "you're not NUL-terminating your byte array" warning.
And none of the cases want any terminating NUL character.
Mark them __nonstring to shut up gcc-15 (and in the case of the ak8974
magnetometer driver, I just removed the explicit array size and let gcc
expand the 3-byte and 6-byte arrays by one extra byte, because it was
the simpler change).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current reset pulse width is measured to be 5us on a
Renesas RZ/G2L SOM. The manufacturer's minimum reset pulse width is
specified as 10us.
Extend reset pulse width to make sure it is long enough on all platforms.
Also reword confusing comments about reset pin assertion.
Fixes: 5b0c03e24a ("Input: Add driver for Cypress Generation 5 touchscreen")
Cc: stable@vger.kernel.org
Acked-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250410184633.1164837-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
GCC 15's new -Wunterminated-string-initialization notices that the
16 character lookup table "nibbles" (which is not used as a C-String)
needs to be marked as "nonstring":
drivers/input/joystick/magellan.c: In function 'magellan_crunch_nibbles':
drivers/input/joystick/magellan.c:51:44: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
51 | static unsigned char nibbles[16] = "0AB3D56GH9:K<MN?";
| ^~~~~~~~~~~~~~~~~~
Add the annotation and While at it, mark the table as const too.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250416174513.work.662-kees@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
For a setup where the matrix keypad is connected over a slow interface
(e.g. a gpio-expansion over i2c), the scan can take a longer time to read.
Interrupts need to be disabled during scan. And therefore changes in this
period are not detected.
To improve this situation, scan the matrix again if the row state changed
during interrupts disabled.
The rescan is repeated until no change is detected anymore.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Link: https://lore.kernel.org/r/20250226152843.43932-4-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Move the evaluation of a row state into separate function.
It will be also used by a change later in this series.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250226152843.43932-2-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
1) Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
2) The final cleanup of the hrtimer_init() to hrtimer_setup() conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline and
all new users are catched.
Doing this right before rc1 ensures that new code which is merged post rc1
is not introducing new instances of the original functionality.
-----BEGIN PGP SIGNATURE-----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=8Ftq
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ/DJvwAKCRBAj56VGEWX
nIvGAQC9nGVCLQX7xO7saMfx5+4/jhkXgPTeDtRs59vNKIoEFAEAgW9DUKShtESV
WQlwkyzoRbAjC8suc2sc+bs4fJ60BQ0=
=xlqq
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Coccinelle scripted cleanup.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips.
-----BEGIN PGP SIGNATURE-----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=ENMh
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips"
* tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
Input: tsc2007 - accept standard properties
around the fallout from the new CONFIG_OBJTOOL_WERROR=y feature,
which, despite its default-off nature, increased the profile/impact
of objtool warnings:
- Improve error handling and the presentation of warnings/errors.
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions.
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations.
- Update objtool to latest (known) compiler quirks and
objtool bugs triggered by compiler code generation
- Misc fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KkiI
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
Core changes:
- None really.
New drivers:
- AMD ISP411 "AMD ISP" driver.
- Exynos 2200 and 7870 SoC subdrivers.
- Sophgo RISC-V SG2042 and SG2044 subdrivers.
- Amlogic A4 subdriver.
- Rockchip RK3528 subdriver.
- Broadcom BCM21664 subdriver.
- Allwinner A523/T527 subdriver.
- Ingenic X1600 subdriver.
- Microchip SAMA7D65 subdriver, essentially a re-branded
Atmel AT91 PIO4 driver, but nowadays a Microschip SoC line.
Improvements:
- Bring in the devm_kmemdup_array() helper and use it throughout,
also bring in changes to other subsystems for this to establish
this helper.
- Support EGPIO on the Qualcomm SA8775P SoC.
- Extend EINT support in the Mediatek driver.
-----BEGIN PGP SIGNATURE-----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=iPMS
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- None really.
New drivers:
- AMD ISP411 "AMD ISP" driver
- Exynos 2200 and 7870 SoC subdrivers
- Sophgo RISC-V SG2042 and SG2044 subdrivers
- Amlogic A4 subdriver
- Rockchip RK3528 subdriver
- Broadcom BCM21664 subdriver
- Allwinner A523/T527 subdriver
- Ingenic X1600 subdriver
- Microchip SAMA7D65 subdriver, essentially a re-branded Atmel AT91
PIO4 driver, but nowadays a Microschip SoC line
Improvements:
- Bring in the devm_kmemdup_array() helper and use it throughout,
also bring in changes to other subsystems for this to establish
this helper
- Support EGPIO on the Qualcomm SA8775P SoC
- Extend EINT support in the Mediatek driver"
* tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (101 commits)
pinctrl: mediatek: Add EINT support for multiple addresses
pinctrl: amlogic-a4: Drop surplus semicolon
pinctrl: nuvoton: Reduce use of OF-specific APIs
pinctrl: nuvoton: Convert to use struct group_desc
pinctrl: nuvoton: Make use of struct pinfunction and PINCTRL_PINFUNCTION()
pinctrl: nuvoton: Convert to use struct pingroup and PINCTRL_PINGROUP()
pinctrl: npcm8xx: Fix incorrect struct npcm8xx_pincfg assignment
pinctrl: tegra: Fix off by one in tegra_pinctrl_get_group()
pinctrl: PINCTRL_AMDISP should depend on DRM_AMD_ISP
pinctrl: qcom: sa8775p: Enable egpio function
dt-bindings: pinctrl: qcom: Add egpio function for sa8775p
pinctrl: qcom: tlmm-test: Validate irq_enable delivers edge irqs
pinctrl: qcom: Clear latched interrupt status when changing IRQ type
dt-bindings: pinctrl: airoha: Add missing gpio-ranges property
pinctrl: bcm281xx: Add missing assignment in bcm21664_pinctrl_lock_all()
pinctrl: amd: isp411: Fix IS_ERR() vs NULL check in probe()
dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
pinctrl: tegra: Set SFIO mode to Mux Register
pinctrl-tegra: Restore SFSEL bit when freeing pins
pinctrl: tegra: Add descriptions for SoC data fields
...
* Added core MFD driver.
* Added charger driver.
* Added devicetree bindings for the charger and MFD core.
* Added Haptic controller support via the input subsystem.
* Added LED support.
* Added support to simple-mfd-i2c for fuel gauge and hwmon.
* Samsung S2MPU05 (Exynos7870 PMIC):
* Added core MFD support.
* Added Regulator support for 21 LDOs and 5 BUCKs.
* Added devicetree bindings for regulators and the PMIC core.
* TI TPS65215 & TPS65214:
* Added support to the existing TPS65219 driver.
* Added devicetree bindings.
* STMicroelectronics STM32MP25:
* Added support to the stm32-timers MFD driver.
* Added devicetree bindings.
* Congatec Board Controller (CGBC):
* Added HWMON support for internal sensors.
* Added support for the conga-SA8 module.
* Microchip LAN969X:
* Enabled the at91-usart MFD driver for this architecture.
* MediaTek MT6359:
* Added mfd_cell for mt6359-accdet to allow its driver to probe.
* AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable
regs for temperature sensor configuration.
* SM501: Switched to using BIT() macro to mitigate potential
integer overflows in GPIO functions.
* ENE KB3930: Added a NULL pointer check for off_gpios during
probe to prevent potential dereference.
* SYSCON: Added a check for invalid resource size to prevent
issues from DT misconfiguration.
* CGBC: Corrected signedness issues in cgbc_session_request.
* intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
* ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
* upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
* max8997: Removed unused max8997_irq_exit() function, using
devm_* helpers instead.
* lp3943: Dropped unused #include <linux/pwm.h> from the header
file.
* db8500-prcmu: Removed needless return statements in void APIs.
* qnap-mcu: Replaced commas with semicolons between expressions
for correctness.
* STA2X11: Removed the core MFD driver as the underlying
platform support was removed.
* EZX-PCAP: Removed the unused pcap_adc_sync function.
* PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
* Converted fsl,mcu-mpc8349emitx binding to YAML.
* Added qcom,msm8937-tcsr compatible.
* Added microchip,sama7d65-flexcom compatible.
* Added rockchip,rk3528-qos syscon compatible.
* Added airoha,en7581-pbus-csr syscon compatible.
* Added microchip,sama7d65-ddr3phy syscon compatible.
* Added microchip,sama7d65-sfrbu syscon compatible.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmfmqKQACgkQUa+KL4f8
d2G+rA//UU3UixCD8FsNN+o4DS7FbxdiSUCrATOBKia9MGfor4xCl6Qk9ZyO4sE1
Rr9zUrTb1xlCmMZupZlkV8TDHHcaiUbgmnKB161d4HMxCbju10MKlm7faz2vRMz3
a73ehTmUeNDiWG3t1/2zAyRt7PHPC2zakUlnXlLhLir12uR2jsDSeGOZh4xR7Hdi
5nkOA2xWbbeW4b+ybwZ32afbLtZFkLo80QvqDx/D9lMUnQO0FqKak0Zope7IzeqC
ilg+tIJOQRGEbjEVQ+pVXsPI6zfmO8eAja70F7sm+Q6TVDw2JhHU/YElHw+quiP+
aLYeE+DuSun1EYlK4ATQ0vzUdgsaOEWblF0eythctXFTfM9ZKhzWYdXEOvco7N4u
R9BYRtM/zGkxiScbr6igyjWZx7NPOsKEKIi5tOv+C2BAKb53om7vsNuMgvMDL/8W
gztmG0SMKwJSx2Dg7h1LLUfa3tG9QRFd0I+Yfaso3MtYmxnZVcJtM5IQbvzf6i/B
3fSiGP6PDNeJqbn9k3/7SB8Tb4XmJUN2LFdDtDuWVhgZpSDULkjpYxAXDIrbp+il
QNdLPiU1x7OzPkFZQxtXLt7yRmlEc2lu9jJHkGVM1M18TMexQiFxoSY9NxkbUj3o
T4s/PKGmRKHP9XxCmRSfu6Veql0MPUwtvkErlUf4GTLWK4oshag=
=ntF1
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Maxim MAX77705:
- Added core MFD driver.
- Added charger driver.
- Added devicetree bindings for the charger and MFD core.
- Added Haptic controller support via the input subsystem.
- Added LED support.
- Added support to simple-mfd-i2c for fuel gauge and hwmon.
Samsung S2MPU05 (Exynos7870 PMIC):
- Added core MFD support.
- Added Regulator support for 21 LDOs and 5 BUCKs.
- Added devicetree bindings for regulators and the PMIC core.
TI TPS65215 & TPS65214:
- Added support to the existing TPS65219 driver.
- Added devicetree bindings.
STMicroelectronics STM32MP25:
- Added support to the stm32-timers MFD driver.
- Added devicetree bindings.
Congatec Board Controller (CGBC):
- Added HWMON support for internal sensors.
- Added support for the conga-SA8 module.
Microchip LAN969X:
- Enabled the at91-usart MFD driver for this architecture.
MediaTek MT6359:
- Added mfd_cell for mt6359-accdet to allow its driver to probe.
Other misc driver updates:
- AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
for temperature sensor configuration.
- SM501: Switched to using BIT() macro to mitigate potential integer
overflows in GPIO functions.
- ENE KB3930: Added a NULL pointer check for off_gpios during probe
to prevent potential dereference.
- SYSCON: Added a check for invalid resource size to prevent issues
from DT misconfiguration.
- CGBC: Corrected signedness issues in cgbc_session_request
- intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
- ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
- upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
- max8997: Removed unused max8997_irq_exit() function, using devm_*
helpers instead.
- lp3943: Dropped unused #include <linux/pwm.h> from the header file.
- db8500-prcmu: Removed needless return statements in void APIs.
- qnap-mcu: Replaced commas with semicolons between expressions for
correctness.
- STA2X11: Removed the core MFD driver as the underlying platform
support was removed.
- EZX-PCAP: Removed the unused pcap_adc_sync function.
- PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
Devicetree updates:
- Converted fsl,mcu-mpc8349emitx binding to YAML
- Added qcom,msm8937-tcsr compatible
- Added microchip,sama7d65-flexcom compatible
- Added rockchip,rk3528-qos syscon compatible
- Added airoha,en7581-pbus-csr syscon compatible
- Added microchip,sama7d65-ddr3phy syscon compatible
- Added microchip,sama7d65-sfrbu syscon compatible"
* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: cgbc-core: Add support for conga-SA8
dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
mfd: cgbc: Add support for HWMON
dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
mfd: pcf50633: Remove remaining PCF50633 support
mfd: pcf50633: Remove unused platform IRQ code
mfd: pcF50633-gpio: Remove unused driver
mfd: pcf50633-adc: Remove unused driver
mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
mfd: mt6397-core: Add mfd_cell for mt6359-accdet
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
mfd: ezx-pcap: Remove unused pcap_adc_sync
mfd: db8500-prcmu: Remove needless return in three void APIs
mfd: Remove STA2x11 core driver
mfd: max77620: Allow building as a module
mfd: ene-kb3930: Fix a potential NULL pointer dereference
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
...
Drop parisc specific memcpy_fromio() function,
clean up coding style and fix compile warnings.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ+faNwAKCRD3ErUQojoP
Xz7SAP91dhQNm/VEpRjODSu43CbQlsiCohCGfZRRRBaPaxIoIAEA5KUk9goheBMt
jL6kgYf8Lcxon83yBNd37bgvZssg/wc=
=NUvi
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- drop parisc specific memcpy_fromio() function
- clean up coding style and fix compile warnings
* tag 'parisc-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: led: Use scnprintf() to avoid string truncation warning
Input: gscps2 - Describe missing function parameters
parisc: perf: use named initializers for struct miscdevice
parisc: PDT: Fix missing prototype warning
parisc: Remove memcpy_fromio
parisc: Fix formatting errors in io.c
In cyapa_update_fw_store(), if 'count' is zero, the write to
fw_name[count-1] underflows the array.
Presumably that's not possible in normal operation, as its caller
sysfs_kf_write() already checks for zero. Regardless it's a good idea
to check for the error explicitly and avoid undefined behavior.
Fixes the following warning with an UBSAN kernel:
vmlinux.o: warning: objtool: .text.cyapa_update_fw_store: unexpected end of section
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/73ae0bb3c656735890d914b74c9d6bb40c25d3cd.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503171547.LlCTJLQL-lkp@intel.com/
- several new device IDs added to xpad game controller driver
- support for imagis IST3038H variant of chip added to imagis touch
controller driver
- a fix for GPIO allocation for ads7846 touch controller driver
- a fix for iqs7222 driver to properly support status register
- a fix for goodix-berlin touch controller driver to use the right name
for the regulator
- more i8042 quirks to better handle several old Clevo devices.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ9YmjwAKCRBAj56VGEWX
nPMXAP9DTIz200i04+sLoW6ZO7NiPUkJTw5AmBC64yXxWncUQQD/T5hue5JJBsJo
Me53HNUu+GiN923FB2dQEJdDvWOclwc=
=A/VU
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- several new device IDs added to xpad game controller driver
- support for imagis IST3038H variant of chip added to imagis touch
controller driver
- a fix for GPIO allocation for ads7846 touch controller driver
- a fix for iqs7222 driver to properly support status register
- a fix for goodix-berlin touch controller driver to use the right name
for the regulator
- more i8042 quirks to better handle several old Clevo devices.
* tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Remove myself from the goodix touchscreen maintainers
Input: iqs7222 - preserve system status register
Input: i8042 - swap old quirk combination with new quirk for more devices
Input: i8042 - swap old quirk combination with new quirk for several devices
Input: i8042 - add required quirks for missing old boardnames
Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ
Input: xpad - rename QH controller to Legion Go S
Input: xpad - add support for TECNO Pocket Go
Input: xpad - add support for ZOTAC Gaming Zone
Input: goodix-berlin - fix vddio regulator references
Input: goodix-berlin - fix comment referencing wrong regulator
Input: imagis - add support for imagis IST3038H
dt-bindings: input/touchscreen: imagis: add compatible for ist3038h
Input: xpad - add multiple supported devices
Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers
Input: ads7846 - fix gpiod allocation
Input: wdt87xx_i2c - fix compiler warning
The current implementation of the goodix_berlin driver lacks support for
revisions A and B of the Berlin IC. This change adds support for the
gt9897 IC, which is a Berlin-A revision part.
The differences between revision D and A are rather minor, a handful of
address changes and a slightly larger read buffer. They were taken from
the driver published by Goodix, which does a few more things that don't
appear to be necessary for the touchscreen to work properly.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250309062315.35720-3-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some register groups reserve a byte at the end of their continuous
address space. Depending on the variant of silicon, this field may
share the same memory space as the lower byte of the system status
register (0x10).
In these cases, caching the reserved byte and writing it later may
effectively reset the device depending on what happened in between
the read and write operations.
Solve this problem by avoiding any access to this last byte within
offending register groups. This method replaces a workaround which
attempted to write the reserved byte with up-to-date contents, but
left a small window in which updates by the device could have been
clobbered.
Now that the driver does not touch these reserved bytes, the order
in which the device's registers are written no longer matters, and
they can be written in their natural order. The new method is also
much more generic, and can be more easily extended to new variants
of silicon with different register maps.
As part of this change, the register read and write functions must
be gently updated to support byte access instead of word access.
Fixes: 2e70ef525b ("Input: iqs7222 - acknowledge reset before writing registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z85Alw+d9EHKXx2e@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Avoid compiler warnings when building with W=1 by adding documentation for
the missing function parameters.
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' into next
Sync up with the mainline.
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
We could not activly retest these devices because we no longer have them in
our archive, but based on the other old Clevo barebones we tested where the
new quirk had the same or a better behaviour I think it would be good to
apply it on these too.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-4-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
While the old quirk combination did not show negative effects on these
devices specifically, the new quirk works just as well and seems more
stable in general.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
The PB71RD keyboard is sometimes laggy after resume and the PC70DR, PB51RF,
P640RE, and PCX0DX_GN20 keyboard is sometimes unresponsive after resume.
This quirk fixes that.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
With the old i8042 quirks this devices keyboard is sometimes laggy after
resume. With the new quirk this issue doesn't happen.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
