Since dance pads can have both up/down or left/right pressed at the same time,
by design, they are not suitable for mapping the buttons to axes. Historically,
this driver mapped the D-pad to BTN_TRIGGER_HAPPY1-4 in these cases, and before
that as mouse buttons. However, BTN_DPAD_* exists for this and makes far more
sense than the arbitrary mapping it was before.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250702034740.124817-1-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
RMI4 F1A implements capacitive keys. Add support for touch keys found in
some Synaptics touch controller configurations.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20250707-rmi4_f1a-v1-2-838d83c72e7f@apitzsch.eu
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Forcepad devices do not have physical buttons underneath the surface and
use F21 to report "clicks" based on touch pressure.
Signed-off-by: Marge Yang <Marge.Yang@tw.synaptics.com>
Link: https://lore.kernel.org/r/20250716033648.1785509-1-marge.yang@tw.synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- just a small fixup to xpad driver correcting recent addition of Acer
NGR200 controller
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaHx8kAAKCRBAj56VGEWX
nKUdAP0SiCkxOSiXNRc7Z8dhw+brN2iMxO4KUeapXhSqUCA5ngEAwstQ74tFqcki
ymEo2Nw3NI77Fk4IzSioBzJVXr4/agY=
=B+ny
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- just a small fixup to the xpad driver correcting the recent addition
of the Acer NGR200 controller
* tag 'input-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - set correct controller type for Acer NGR200
The controller should have been set as XTYPE_XBOX360 and not XTYPE_XBOX.
Also the entry is in the wrong place. Fix it.
Reported-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Link: https://lore.kernel.org/r/20250708033126.26216-2-niltonperimneto@gmail.com
Fixes: 22c69d786e ("Input: xpad - support Acer NGR 200 Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaGdm4wAKCRBAj56VGEWX
nJJxAPwMafYOIr+aW1+taLorp3FRyoFuh9Q4IZk9n3J2Dx/HGwD8CUpXDytgE+n7
BRMjXB7PPF9b35FjmKT8kTIHZxiTHAc=
=w9vL
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
* tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
Input: alps - use scnprintf() to suppress truncation warning
Input: iqs7222 - explicitly define number of external channels
Input: xpad - support Acer NGR 200 Controller
Input: xpad - return errors from xpad_try_sending_next_out_packet() up
Input: xpad - adjust error handling for disconnect
Input: apple_z2 - drop default ARCH_APPLE in Kconfig
Input: Fully open-code compatible for grepping
dt-bindings: HID: i2c-hid: elan: Introduce Elan eKTH8D18
Input: psmouse - switch to use scnprintf() to suppress truncation warning
Input: lifebook - switch to use scnprintf() to suppress truncation warning
Input: alps - switch to use scnprintf() to suppress truncation warning
Input: atkbd - switch to use scnprintf() to suppress truncation warning
Input: fsia6b - suppress buffer truncation warning for phys
Input: iqs626a - replace snprintf() with scnprintf()
The cs40l50_upload_owt() function allocates memory via kmalloc()
without checking for allocation failure, which could lead to a
NULL pointer dereference.
Return -ENOMEM in case allocation fails.
Signed-off-by: Yunshui Jiang <jiangyunshui@kylinos.cn>
Fixes: c38fe1bb5d ("Input: cs40l50 - Add support for the CS40L50 haptic driver")
Link: https://lore.kernel.org/r/20250704024010.2353841-1-jiangyunshui@kylinos.cn
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
evdev has switched to match on EV_SYN instead of relying on non-zero
driver_info field to allow matching to all devices. Remove special
handling from input core.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Each input device has EV_SYN capability. This is enforced by the input
core which sets this capability bit unconditionally in
input_register_device().
Switch evdev matching from declaring non-zero id->driver_info to match
on EV_SYN so that special handling can be removed from
input_match_device() and "driver_info" field can be removed from
input_device_id structure.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of doing conditional logic based on the chip type, define
per-chip parameter structure, and reference it in the match data
(either of_device_id or platform_device_id).
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240819045813.2154642-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation is more compact and ensures that the mutex will be
released when control leaves the function.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240819045813.2154642-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver uses devm API to allocate resources so there's no reason
to do allocations first and then check and release everything at once.
Check results immediately after doing allocation of each resource.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240819045813.2154642-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver uses devm_input_allocate_device() to allocate instances of
input device, which sets the parent appropriately. Remove extraneous
assignment.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240819045813.2154642-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch to using devm_clk_get_prepared() instead of combining
devm_clk_get() with clk_prepare(), which simplifies the code and
ensures that the clock is unprepared at the right time relative to
releasing other managed resources.
Link: https://lore.kernel.org/r/20240819045813.2154642-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The adp5589 support is based on legacy platform data and there's no
upstream platform using this device.
Moreover, recently, with
commit
480a8ad683 ("mfd: adp5585: Add Analog Devices ADP5585 core support")
we overlapped support for the adp5585 device (gpiochip part of it) but
since it actually makes sense for the device to be supported under MFD, we
can complement it and add the keymap support for it (properly based on FW
properties). And that is what
commit
04840c5363a6 ("Input: adp5585: Add Analog Devices ADP5585/89 support")
is doing.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-17-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ADP5585 is a 10/11 input/output port expander with a built in keypad
matrix decoder, programmable logic, reset generator, and PWM generator.
This driver supports the keyboard function using the platform device
registered by the core MFD driver.
The ADP5589 has 19 pins and also features an unlock function.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-16-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver is compatible with the FocalTech FT8716 touchscreen, which
supports up to 10 concurrent touch points. Add a compatible for it.
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250313202017.19621-3-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the custom directory in debugfs root. Further
improvements by this change: support of multiple instances.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318091904.22468-1-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
destroy_workqueue() already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250312072940.1429931-1-nichen@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Both pwm_config() and pwm_enable() are wrappers around
pwm_apply_might_sleep(). Instead of calling this function twice only
call it once without an intermediate step.
Setup the PWM in max8997_haptic_enable() only where it was enabled
historically. max8997_haptic_set_duty_cycle() is renamed accordingly to
make it clear this function is only about the internal setup now.
pwm_config() was called earlier back then, but that call has no effect
on the hardware when the PWM is disabled, so delaying this configuration
doesn't make a difference.
As pwm_apply_might_sleep() is used now defining the whole state of the
PWM, the call to pwm_apply_args() in .probe() can be dropped now, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250630093718.2062359-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The commit 76c968e75715 ("Input: alps - switch to use scnprintf() to suppress
truncation warning") converted one place in the driver while the other left
untouched. Convert the other place as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630082245.1416796-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The number of external channels is assumed to be a multiple of 10,
but this is not the case for IQS7222D. As a result, some CRx pins
are wrongly prevented from being assigned to some channels.
Address this problem by explicitly defining the number of external
channels for cases in which the number of external channels is not
equal to the total number of available channels.
Fixes: dd24e202ac ("Input: iqs7222 - add support for Azoteq IQS7222D")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aGHVf6HkyFZrzTPy@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are designs incorporating Goodix touch controller that do not
connect interrupt pin, for example Raspberry Pi. To support such systems
use polling mode for the input device when I2C client does not have
interrupt assigned to it.
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250522020418.1963422-1-qijian.guo@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-input-v1-3-5875240b48d8@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-input-v1-2-5875240b48d8@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-input-v1-1-5875240b48d8@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Not all errors that occur in xpad_try_sending_next_out_packet() are
IO errors. Pass up the error code to the caller so that it can
decide what to do.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250609014718.236827-3-superm1@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a device supporting xpad is disconnected it's expected that a
URB will fail to transmit.
Only show an error message when the error isn't -ENODEV.
Fixes: 7fc595f4c0 ("Input: xpad - correctly handle concurrent LED and FF requests")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250609014718.236827-2-superm1@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250612-apple-kconfig-defconfig-v1-8-0e6f9cb512c1@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It is very useful to find driver implementing compatibles with `git grep
compatible`, so driver should not use defines for that string, even if
this means string will be effectively duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250613071653.46809-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
W=1 builds warn that the data written to 'tc_name' is truncated for
theoretical strings such as "channel-2147483646".
Solve this problem by replacing snprintf() with scnprintf() so that
the return value corresponds to what was actually written.
In practice, the largest string that will be written is "channel-8",
and the return value is not actually evaluated. Instead, this patch
ultimately removes the warning without unnecessarily increasing the
size of 'tc_name' from 10 bytes.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412221136.0S4kRoCC-lkp@intel.com/
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z3rV8GTHxLyjBQ5I@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The "len" variable comes from the firmware and we generally do
trust firmware, but it's always better to double check. If the "len"
is too large it could result in memory corruption when we do
"memcpy(fragment->data, rec->data, len);"
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/131fd1ae92c828ee9f4fa2de03d8c210ae1f3524.1748463049.git.dan.carpenter@linaro.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
gpio_keys_irq_isr() and gpio_keys_irq_timer() access the same resources.
There could be a concurrent access if a GPIO interrupt occurs in parallel
of a HR timer interrupt.
Guard back those resources with a spinlock.
Fixes: 019002f20c ("Input: gpio-keys - use hrtimer for release timer")
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20250528-gpio_keys_preempt_rt-v2-2-3fc55a9c3619@foss.st.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in
hard irq context, but the input_event() takes a spin_lock, which isn't
allowed there as it is converted to a rt_spin_lock().
[ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0
...
[ 4054.290195] __might_resched+0x13c/0x1f4
[ 4054.290209] rt_spin_lock+0x54/0x11c
[ 4054.290219] input_event+0x48/0x80
[ 4054.290230] gpio_keys_irq_timer+0x4c/0x78
[ 4054.290243] __hrtimer_run_queues+0x1a4/0x438
[ 4054.290257] hrtimer_interrupt+0xe4/0x240
[ 4054.290269] arch_timer_handler_phys+0x2c/0x44
[ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c
[ 4054.290297] handle_irq_desc+0x40/0x58
[ 4054.290307] generic_handle_domain_irq+0x1c/0x28
[ 4054.290316] gic_handle_irq+0x44/0xcc
Considering the gpio_keys_irq_isr() can run in any context, e.g. it can
be threaded, it seems there's no point in requesting the timer isr to
run in hard irq context.
Relax the hrtimer not to use the hard context.
Fixes: 019002f20c ("Input: gpio-keys - use hrtimer for release timer")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20250528-gpio_keys_preempt_rt-v2-1-3fc55a9c3619@foss.st.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Sysfs interface for updating firmware for RMI devices is available even
when F34 probe fails. The code checks for presence of F34 "container"
pointer and then tries to use the function data attached to the
sub-device. F34 assigns the function data early, before it knows if
probe will succeed, leaving behind a stale pointer.
Fix this by expanding checks to not only test for presence of F34
"container" but also check if there is driver data assigned to the
sub-device, and call dev_set_drvdata() only after we are certain that
probe is successful.
This is not a complete fix, since F34 will be freed during firmware
update, so there is still a race when fetching and accessing this
pointer. This race will be addressed in follow-up changes.
Reported-by: Hanno Böck <hanno@hboeck.de>
Fixes: 29fd0ec2bd ("Input: synaptics-rmi4 - add support for F34 device reflash")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBlAl6sGulam-Qcx@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The keyboard is properly initialized by the firmware on Loongson
platform, so full reset of the keyboard is not needed. Switch the
default to avoid performing full reset of the keyboard.
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250401094154.11527-1-zhaoqunqin@loongson.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some Xbox One controllers will only start processing the init packets after
sending the GIP announce packet. While most controllers send this packet
immediately, others will delay for some time, e.g. if a dongle needs to connect
to an actual controller first. In those cases, we want to delay until we
receive the announce packet before sending the init sequence.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250513225411.2718072-2-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmghHIMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQP4H/0nzYeRJaWdhar4B
tb3tOUyHpokhqNpWYA+fSxq83H1yTuxv3PoHDJg1OEXfmwmfKS8+UelkBZX+fl/q
gfUz9CdmgMfXyXHw3jQnDGx6IwBDT5z3GfKbmFyzft8vqMyfGSGYmfdSaR+MZrD6
WxxCyNgPWGkT41MgvHW8JAH8Hj+yyzpu7uqx3LIS2KA3dJcxZGJUYC3uA2UBIuGD
CmTuWaG6zY4uTtiAOXUscKyA9wCh7cawTLJKAtc6SEpzAbMmZ3nUiOAVoKf70R0t
EqH16aToV+th/zUvCuPKT3bWIkiNxDsibtwfW9fIJ8aZnQuvO/bK4ygHXjy8C/vc
PUaWMIA=
=evf8
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc6' into next
Sync up with mainline to bring in xpad controller changes.
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell
Precision M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaCBDmQAKCRBAj56VGEWX
nA13AQCmVOo2PAJU2CtMxqwEVZMat0id/fk0Ro8aiW8JBzyzuwD/as/hMtOkAGyI
pUsaxLp7SlOUMq9YFlkbC/Ffe2GH2QQ=
=yrk/
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
A recent commit put one entry in the wrong place. This just moves it to the
right place.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-5-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This adds support for several new controllers, all of which include
Share buttons:
- HORI Drum controller
- PowerA Fusion Pro 4
- 8BitDo Ultimate 3-mode Controller
- Hyperkin DuchesS Xbox One controller
- PowerA MOGA XP-Ultra controller
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-4-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Two controllers -- Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's
Edge Official -- were missing the value of the mapping field, and thus
wouldn't detect properly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-1-vi@endrift.com
Fixes: 540602a43a ("Input: xpad - add a few new VID/PID combinations")
Fixes: 3492321e2e ("Input: xpad - add multiple supported devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To wake up the system from s2idle when pressing the power-button, let's
convert from using pm_wakeup_event() to pm_wakeup_dev_event(), as it allows
us to specify the "hard" in-parameter, which needs to be set for s2idle.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250306115021.797426-1-ulf.hansson@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Enable InterTouch mode on TUXEDO InfinityBook Pro 14 v5 by adding
"SYN1221" to the list of SMBus-enabled variants.
Add support for InterTouch on SYN1221 by adding it to the list of
SMBus-enabled variants.
Reported-by: Matthias Eilert <kernel.hias@eilert.tech>
Tested-by: Matthias Eilert <kernel.hias@eilert.tech>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB9597C033C4BC20EE2A0C4543B888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ 5.989588] psmouse serio1: synaptics: Your touchpad (PNP: TOS0213 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 6.039923] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.32, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x52d884, board id: 3322, fw id: 2658004
The board is labelled TM3322.
Present on the Toshiba / Dynabook Portege X30-D and possibly others.
Confirmed working well with psmouse.synaptics_intertouch=1 and local build.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB9597711E7933A08389FEC31DB888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The power-off time is configured in LPCR[17:16] BTN_PRESS_TIME:
* b00: 5 seconds (SoC default)
* b01: 10 seconds
* b10: 15 seconds
* b11: PMIC is not disabled
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://lore.kernel.org/r/20250315093455.1100-3-ian.ray@gehealthcare.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In mtk_pmic_keys_probe, the regs parameter is only set if the button is
parsed in the device tree. However, on hardware where the button is left
floating, that node will most likely be removed not to enable that
input. In that case the code will try to dereference a null pointer.
Let's use the regs struct instead as it is defined for all supported
platforms. Note that it is ok setting the key reg even if that latter is
disabled as the interrupt won't be enabled anyway.
Fixes: b581acb49a ("Input: mtk-pmic-keys - transfer per-key bit in mtk_pmic_keys_regs")
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The power control function ignores the "on" argument when setting the
report ID, and thus is always sending HID_POWER_SLEEP. This causes a
problem when trying to wakeup.
Fix by sending the state variable, which contains the proper HID_POWER_ON or
HID_POWER_SLEEP based on the "on" argument.
Fixes: 3c98b8dbdc ("Input: cyttsp5 - implement proper sleep and wakeup procedures")
Cc: stable@vger.kernel.org
Signed-off-by: Mikael Gonella-Bolduc <mgonellabolduc@dimonoff.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20250423135243.1261460-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When compile tested with W=1 on x86_64 with driver as built-in:
stmpe-ts.c:371:34: error: unused variable 'stmpe_ts_ids' [-Werror,-Wunused-const-variable]
Ideally this would be referenced from the platform_driver, but since
the compatible string is already matched by the mfd driver for its
parent device, that would break probing.
In this case, the of_device_id table just serves as a module alias
for loading the driver, while the device itself is probed using
the platform device name.
Remove the table and instead use a module alias that reflects how
the driver is actually probed.
Link: https://lore.kernel.org/lkml/20240403080702.3509288-8-arnd@kernel.org/
Link: https://lore.kernel.org/lkml/181dbdb8-c050-4966-8cb4-2f39495ff3f9@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250409122314.2848028-3-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
All of these cases are perfectly valid and good traditional C, but hit
by the "you're not NUL-terminating your byte array" warning.
And none of the cases want any terminating NUL character.
Mark them __nonstring to shut up gcc-15 (and in the case of the ak8974
magnetometer driver, I just removed the explicit array size and let gcc
expand the 3-byte and 6-byte arrays by one extra byte, because it was
the simpler change).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current reset pulse width is measured to be 5us on a
Renesas RZ/G2L SOM. The manufacturer's minimum reset pulse width is
specified as 10us.
Extend reset pulse width to make sure it is long enough on all platforms.
Also reword confusing comments about reset pin assertion.
Fixes: 5b0c03e24a ("Input: Add driver for Cypress Generation 5 touchscreen")
Cc: stable@vger.kernel.org
Acked-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250410184633.1164837-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
GCC 15's new -Wunterminated-string-initialization notices that the
16 character lookup table "nibbles" (which is not used as a C-String)
needs to be marked as "nonstring":
drivers/input/joystick/magellan.c: In function 'magellan_crunch_nibbles':
drivers/input/joystick/magellan.c:51:44: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
51 | static unsigned char nibbles[16] = "0AB3D56GH9:K<MN?";
| ^~~~~~~~~~~~~~~~~~
Add the annotation and While at it, mark the table as const too.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250416174513.work.662-kees@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
For a setup where the matrix keypad is connected over a slow interface
(e.g. a gpio-expansion over i2c), the scan can take a longer time to read.
Interrupts need to be disabled during scan. And therefore changes in this
period are not detected.
To improve this situation, scan the matrix again if the row state changed
during interrupts disabled.
The rescan is repeated until no change is detected anymore.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Link: https://lore.kernel.org/r/20250226152843.43932-4-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Move the evaluation of a row state into separate function.
It will be also used by a change later in this series.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250226152843.43932-2-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
1) Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
2) The final cleanup of the hrtimer_init() to hrtimer_setup() conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline and
all new users are catched.
Doing this right before rc1 ensures that new code which is merged post rc1
is not introducing new instances of the original functionality.
-----BEGIN PGP SIGNATURE-----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=8Ftq
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ/DJvwAKCRBAj56VGEWX
nIvGAQC9nGVCLQX7xO7saMfx5+4/jhkXgPTeDtRs59vNKIoEFAEAgW9DUKShtESV
WQlwkyzoRbAjC8suc2sc+bs4fJ60BQ0=
=xlqq
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Coccinelle scripted cleanup.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips.
-----BEGIN PGP SIGNATURE-----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=ENMh
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips"
* tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
Input: tsc2007 - accept standard properties
around the fallout from the new CONFIG_OBJTOOL_WERROR=y feature,
which, despite its default-off nature, increased the profile/impact
of objtool warnings:
- Improve error handling and the presentation of warnings/errors.
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions.
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations.
- Update objtool to latest (known) compiler quirks and
objtool bugs triggered by compiler code generation
- Misc fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KkiI
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
Core changes:
- None really.
New drivers:
- AMD ISP411 "AMD ISP" driver.
- Exynos 2200 and 7870 SoC subdrivers.
- Sophgo RISC-V SG2042 and SG2044 subdrivers.
- Amlogic A4 subdriver.
- Rockchip RK3528 subdriver.
- Broadcom BCM21664 subdriver.
- Allwinner A523/T527 subdriver.
- Ingenic X1600 subdriver.
- Microchip SAMA7D65 subdriver, essentially a re-branded
Atmel AT91 PIO4 driver, but nowadays a Microschip SoC line.
Improvements:
- Bring in the devm_kmemdup_array() helper and use it throughout,
also bring in changes to other subsystems for this to establish
this helper.
- Support EGPIO on the Qualcomm SA8775P SoC.
- Extend EINT support in the Mediatek driver.
-----BEGIN PGP SIGNATURE-----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=iPMS
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- None really.
New drivers:
- AMD ISP411 "AMD ISP" driver
- Exynos 2200 and 7870 SoC subdrivers
- Sophgo RISC-V SG2042 and SG2044 subdrivers
- Amlogic A4 subdriver
- Rockchip RK3528 subdriver
- Broadcom BCM21664 subdriver
- Allwinner A523/T527 subdriver
- Ingenic X1600 subdriver
- Microchip SAMA7D65 subdriver, essentially a re-branded Atmel AT91
PIO4 driver, but nowadays a Microschip SoC line
Improvements:
- Bring in the devm_kmemdup_array() helper and use it throughout,
also bring in changes to other subsystems for this to establish
this helper
- Support EGPIO on the Qualcomm SA8775P SoC
- Extend EINT support in the Mediatek driver"
* tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (101 commits)
pinctrl: mediatek: Add EINT support for multiple addresses
pinctrl: amlogic-a4: Drop surplus semicolon
pinctrl: nuvoton: Reduce use of OF-specific APIs
pinctrl: nuvoton: Convert to use struct group_desc
pinctrl: nuvoton: Make use of struct pinfunction and PINCTRL_PINFUNCTION()
pinctrl: nuvoton: Convert to use struct pingroup and PINCTRL_PINGROUP()
pinctrl: npcm8xx: Fix incorrect struct npcm8xx_pincfg assignment
pinctrl: tegra: Fix off by one in tegra_pinctrl_get_group()
pinctrl: PINCTRL_AMDISP should depend on DRM_AMD_ISP
pinctrl: qcom: sa8775p: Enable egpio function
dt-bindings: pinctrl: qcom: Add egpio function for sa8775p
pinctrl: qcom: tlmm-test: Validate irq_enable delivers edge irqs
pinctrl: qcom: Clear latched interrupt status when changing IRQ type
dt-bindings: pinctrl: airoha: Add missing gpio-ranges property
pinctrl: bcm281xx: Add missing assignment in bcm21664_pinctrl_lock_all()
pinctrl: amd: isp411: Fix IS_ERR() vs NULL check in probe()
dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
pinctrl: tegra: Set SFIO mode to Mux Register
pinctrl-tegra: Restore SFSEL bit when freeing pins
pinctrl: tegra: Add descriptions for SoC data fields
...
* Added core MFD driver.
* Added charger driver.
* Added devicetree bindings for the charger and MFD core.
* Added Haptic controller support via the input subsystem.
* Added LED support.
* Added support to simple-mfd-i2c for fuel gauge and hwmon.
* Samsung S2MPU05 (Exynos7870 PMIC):
* Added core MFD support.
* Added Regulator support for 21 LDOs and 5 BUCKs.
* Added devicetree bindings for regulators and the PMIC core.
* TI TPS65215 & TPS65214:
* Added support to the existing TPS65219 driver.
* Added devicetree bindings.
* STMicroelectronics STM32MP25:
* Added support to the stm32-timers MFD driver.
* Added devicetree bindings.
* Congatec Board Controller (CGBC):
* Added HWMON support for internal sensors.
* Added support for the conga-SA8 module.
* Microchip LAN969X:
* Enabled the at91-usart MFD driver for this architecture.
* MediaTek MT6359:
* Added mfd_cell for mt6359-accdet to allow its driver to probe.
* AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable
regs for temperature sensor configuration.
* SM501: Switched to using BIT() macro to mitigate potential
integer overflows in GPIO functions.
* ENE KB3930: Added a NULL pointer check for off_gpios during
probe to prevent potential dereference.
* SYSCON: Added a check for invalid resource size to prevent
issues from DT misconfiguration.
* CGBC: Corrected signedness issues in cgbc_session_request.
* intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
* ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
* upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
* max8997: Removed unused max8997_irq_exit() function, using
devm_* helpers instead.
* lp3943: Dropped unused #include <linux/pwm.h> from the header
file.
* db8500-prcmu: Removed needless return statements in void APIs.
* qnap-mcu: Replaced commas with semicolons between expressions
for correctness.
* STA2X11: Removed the core MFD driver as the underlying
platform support was removed.
* EZX-PCAP: Removed the unused pcap_adc_sync function.
* PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
* Converted fsl,mcu-mpc8349emitx binding to YAML.
* Added qcom,msm8937-tcsr compatible.
* Added microchip,sama7d65-flexcom compatible.
* Added rockchip,rk3528-qos syscon compatible.
* Added airoha,en7581-pbus-csr syscon compatible.
* Added microchip,sama7d65-ddr3phy syscon compatible.
* Added microchip,sama7d65-sfrbu syscon compatible.
-----BEGIN PGP SIGNATURE-----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=ntF1
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Maxim MAX77705:
- Added core MFD driver.
- Added charger driver.
- Added devicetree bindings for the charger and MFD core.
- Added Haptic controller support via the input subsystem.
- Added LED support.
- Added support to simple-mfd-i2c for fuel gauge and hwmon.
Samsung S2MPU05 (Exynos7870 PMIC):
- Added core MFD support.
- Added Regulator support for 21 LDOs and 5 BUCKs.
- Added devicetree bindings for regulators and the PMIC core.
TI TPS65215 & TPS65214:
- Added support to the existing TPS65219 driver.
- Added devicetree bindings.
STMicroelectronics STM32MP25:
- Added support to the stm32-timers MFD driver.
- Added devicetree bindings.
Congatec Board Controller (CGBC):
- Added HWMON support for internal sensors.
- Added support for the conga-SA8 module.
Microchip LAN969X:
- Enabled the at91-usart MFD driver for this architecture.
MediaTek MT6359:
- Added mfd_cell for mt6359-accdet to allow its driver to probe.
Other misc driver updates:
- AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
for temperature sensor configuration.
- SM501: Switched to using BIT() macro to mitigate potential integer
overflows in GPIO functions.
- ENE KB3930: Added a NULL pointer check for off_gpios during probe
to prevent potential dereference.
- SYSCON: Added a check for invalid resource size to prevent issues
from DT misconfiguration.
- CGBC: Corrected signedness issues in cgbc_session_request
- intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
- ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
- upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
- max8997: Removed unused max8997_irq_exit() function, using devm_*
helpers instead.
- lp3943: Dropped unused #include <linux/pwm.h> from the header file.
- db8500-prcmu: Removed needless return statements in void APIs.
- qnap-mcu: Replaced commas with semicolons between expressions for
correctness.
- STA2X11: Removed the core MFD driver as the underlying platform
support was removed.
- EZX-PCAP: Removed the unused pcap_adc_sync function.
- PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
Devicetree updates:
- Converted fsl,mcu-mpc8349emitx binding to YAML
- Added qcom,msm8937-tcsr compatible
- Added microchip,sama7d65-flexcom compatible
- Added rockchip,rk3528-qos syscon compatible
- Added airoha,en7581-pbus-csr syscon compatible
- Added microchip,sama7d65-ddr3phy syscon compatible
- Added microchip,sama7d65-sfrbu syscon compatible"
* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: cgbc-core: Add support for conga-SA8
dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
mfd: cgbc: Add support for HWMON
dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
mfd: pcf50633: Remove remaining PCF50633 support
mfd: pcf50633: Remove unused platform IRQ code
mfd: pcF50633-gpio: Remove unused driver
mfd: pcf50633-adc: Remove unused driver
mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
mfd: mt6397-core: Add mfd_cell for mt6359-accdet
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
mfd: ezx-pcap: Remove unused pcap_adc_sync
mfd: db8500-prcmu: Remove needless return in three void APIs
mfd: Remove STA2x11 core driver
mfd: max77620: Allow building as a module
mfd: ene-kb3930: Fix a potential NULL pointer dereference
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
...
Drop parisc specific memcpy_fromio() function,
clean up coding style and fix compile warnings.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ+faNwAKCRD3ErUQojoP
Xz7SAP91dhQNm/VEpRjODSu43CbQlsiCohCGfZRRRBaPaxIoIAEA5KUk9goheBMt
jL6kgYf8Lcxon83yBNd37bgvZssg/wc=
=NUvi
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- drop parisc specific memcpy_fromio() function
- clean up coding style and fix compile warnings
* tag 'parisc-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: led: Use scnprintf() to avoid string truncation warning
Input: gscps2 - Describe missing function parameters
parisc: perf: use named initializers for struct miscdevice
parisc: PDT: Fix missing prototype warning
parisc: Remove memcpy_fromio
parisc: Fix formatting errors in io.c
In cyapa_update_fw_store(), if 'count' is zero, the write to
fw_name[count-1] underflows the array.
Presumably that's not possible in normal operation, as its caller
sysfs_kf_write() already checks for zero. Regardless it's a good idea
to check for the error explicitly and avoid undefined behavior.
Fixes the following warning with an UBSAN kernel:
vmlinux.o: warning: objtool: .text.cyapa_update_fw_store: unexpected end of section
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/73ae0bb3c656735890d914b74c9d6bb40c25d3cd.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503171547.LlCTJLQL-lkp@intel.com/
- several new device IDs added to xpad game controller driver
- support for imagis IST3038H variant of chip added to imagis touch
controller driver
- a fix for GPIO allocation for ads7846 touch controller driver
- a fix for iqs7222 driver to properly support status register
- a fix for goodix-berlin touch controller driver to use the right name
for the regulator
- more i8042 quirks to better handle several old Clevo devices.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ9YmjwAKCRBAj56VGEWX
nPMXAP9DTIz200i04+sLoW6ZO7NiPUkJTw5AmBC64yXxWncUQQD/T5hue5JJBsJo
Me53HNUu+GiN923FB2dQEJdDvWOclwc=
=A/VU
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- several new device IDs added to xpad game controller driver
- support for imagis IST3038H variant of chip added to imagis touch
controller driver
- a fix for GPIO allocation for ads7846 touch controller driver
- a fix for iqs7222 driver to properly support status register
- a fix for goodix-berlin touch controller driver to use the right name
for the regulator
- more i8042 quirks to better handle several old Clevo devices.
* tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Remove myself from the goodix touchscreen maintainers
Input: iqs7222 - preserve system status register
Input: i8042 - swap old quirk combination with new quirk for more devices
Input: i8042 - swap old quirk combination with new quirk for several devices
Input: i8042 - add required quirks for missing old boardnames
Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ
Input: xpad - rename QH controller to Legion Go S
Input: xpad - add support for TECNO Pocket Go
Input: xpad - add support for ZOTAC Gaming Zone
Input: goodix-berlin - fix vddio regulator references
Input: goodix-berlin - fix comment referencing wrong regulator
Input: imagis - add support for imagis IST3038H
dt-bindings: input/touchscreen: imagis: add compatible for ist3038h
Input: xpad - add multiple supported devices
Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers
Input: ads7846 - fix gpiod allocation
Input: wdt87xx_i2c - fix compiler warning
The current implementation of the goodix_berlin driver lacks support for
revisions A and B of the Berlin IC. This change adds support for the
gt9897 IC, which is a Berlin-A revision part.
The differences between revision D and A are rather minor, a handful of
address changes and a slightly larger read buffer. They were taken from
the driver published by Goodix, which does a few more things that don't
appear to be necessary for the touchscreen to work properly.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250309062315.35720-3-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some register groups reserve a byte at the end of their continuous
address space. Depending on the variant of silicon, this field may
share the same memory space as the lower byte of the system status
register (0x10).
In these cases, caching the reserved byte and writing it later may
effectively reset the device depending on what happened in between
the read and write operations.
Solve this problem by avoiding any access to this last byte within
offending register groups. This method replaces a workaround which
attempted to write the reserved byte with up-to-date contents, but
left a small window in which updates by the device could have been
clobbered.
Now that the driver does not touch these reserved bytes, the order
in which the device's registers are written no longer matters, and
they can be written in their natural order. The new method is also
much more generic, and can be more easily extended to new variants
of silicon with different register maps.
As part of this change, the register read and write functions must
be gently updated to support byte access instead of word access.
Fixes: 2e70ef525b ("Input: iqs7222 - acknowledge reset before writing registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z85Alw+d9EHKXx2e@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Avoid compiler warnings when building with W=1 by adding documentation for
the missing function parameters.
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' into next
Sync up with the mainline.
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
We could not activly retest these devices because we no longer have them in
our archive, but based on the other old Clevo barebones we tested where the
new quirk had the same or a better behaviour I think it would be good to
apply it on these too.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-4-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
While the old quirk combination did not show negative effects on these
devices specifically, the new quirk works just as well and seems more
stable in general.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
The PB71RD keyboard is sometimes laggy after resume and the PC70DR, PB51RF,
P640RE, and PCX0DX_GN20 keyboard is sometimes unresponsive after resume.
This quirk fixes that.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
With the old i8042 quirks this devices keyboard is sometimes laggy after
resume. With the new quirk this issue doesn't happen.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since 'sw_debounce_end_time' of 'struct pm8941_pwrkey' is of type
'ktime_t', use 'ktime_to_us()' to print the value in microseconds
as it is announced in a call to 'dev_dbg()'. Compile tested only.
Fixes: 0b65118e6b ("Input: pm8941-pwrkey - add software key press debouncing support")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Link: https://lore.kernel.org/r/20250216170336.861025-1-dmantipov@yandex.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When SMBUS is disabled, this is never referenced, causing a W=1 warning:
drivers/input/mouse/synaptics.c:164:27: error: 'smbus_pnp_ids' defined but not used [-Werror=unused-const-variable=]
Hide the array behind the same #ifdef as the code referencing it.
Fixes: e839ffab02 ("Input: synaptics - add support for Intertouch devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225145451.1141995-1-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a dependency on ARCH_APPLE and clarify the description to make it
more obvious that this is for ARM machines, not x86 ones.
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250225-z2-kconfig-v1-1-a67d9b778a6c@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The delay is specified in a device property, so the duration can be
arbitrarily large. fsleep() determines the best way of delaying (sleep
vs spin) based on duration.
see Documentation/timers/delay_sleep_functions.rst
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-2-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Matrix keypads with high capacity need a longer settle time after
enabling all columns before re-enabling interrupts. The delay gives
the system time to settle and avoids spurious interrupts.
Add a new optional device property to configure the delay after
enabling all columns. The default is no delay.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-7-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The QH controller is actually the controller of the Legion Go S, with
the manufacturer string wch.cn and product name Legion Go S in its
USB descriptor. A cursory lookup of the VID reveals the same.
Therefore, rename the xpad entries to match.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-4-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
TECNO Pocket Go is a kickstarter handheld by manufacturer TECNO Mobile.
It poses a unique feature: it does not have a display. Instead, the
handheld is essentially a pc in a controller. As customary, it has an
xpad endpoint, a keyboard endpoint, and a vendor endpoint for its
vendor software.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-3-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
ZOTAC Gaming Zone is ZOTAC's 2024 handheld release. As it is common
with these handhelds, it uses a hybrid USB device with an xpad
endpoint, a keyboard endpoint, and a vendor-specific endpoint for
RGB control et al.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-2-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As per dt-bindings the property is called vddio-supply, so use the
correct name in the driver instead of iovdd. The datasheet also calls
the supply 'VDDIO'.
Fixes: 44362279bd ("Input: add core support for Goodix Berlin Touchscreen IC")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-2-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the statement above AVDD gets enabled, and not IOVDD, so fix this
copy-paste mistake.
Fixes: 44362279bd ("Input: add core support for Goodix Berlin Touchscreen IC")
Reported-by: Jens Reidel <adrian@travitia.xyz>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-1-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for imagis IST3038H, which seems mostly compatible with
IST3038C except that it reports a different chip ID value.
Tested on samsung,j5y17lte.
Signed-off-by: Andras Sebok <sebokandris2009@gmail.com>
Link: https://lore.kernel.org/r/20250224090354.102903-2-sebokandris2009@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert to use devm_kmemdup_array() which is more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241222-sysfs-const-bin_attr-input-v1-1-1229dbe5ae71@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for haptic controller on MAX77705 Multifunction
device.
This driver supports external pwm and LRA (Linear Resonant Actuator) motor.
User can control the haptic device via force feedback framework.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-6-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Adds a driver for Apple touchscreens using the Z2 protocol.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250217-z2-v6-2-c2115d6e5a8f@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/62db561622799dfc8d58682ca41b54e3f1ff6949.1738746904.git.namcao@linutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Link: https://lore.kernel.org/r/ec811552-6014-43d4-9fcc-2ac729a8b08e@xs4all.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
commit 767d83361a ("Input: ads7846 - Convert to use software nodes")
has simplified the code but accidentially converted a devm_gpiod_get()
to gpiod_get(). This leaves the gpio reserved on module remove and the
driver can no longer be loaded again.
Fixes: 767d83361a ("Input: ads7846 - Convert to use software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/6e9b143f19cdfda835711a8a7a3966e5a2494cff.1738410204.git.hns@goldelico.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Highlights:
- acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile
with WMI calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
- ACPI: platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers
concurrently to avoid the need to quirk which handler takes
precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside
the pre-defined profile
- Abstract and layer platform_profile API better using the
class_dev and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
- amd/hsmp: Add support for HSMP protocol v7
- amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
- amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
- dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and
XPS 9550
- Support probing accelerometer for models yet to be listed in
the DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might
be dangerous)
- HID: amd_sfh: Add support for exporting SRA sensor data
- hp-wmi: Add fan and thermal support for Victus 16-s1000
- input: Add key for phone linking
- input: i8042: Add context for the i8042 filter to enable cleaning up
the filter related global variables from pdx86 drivers
- lenovo-wmi-camera: Use SW_CAMERA_LENS_COVER instead of
KEY_CAMERA_ACCESS
- mellanox: mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
- thinkpad_acpi: Add support for phone link key
- tools/power/x86/intel-speed-select: Fix Turbo Ratio Limit restore
- x86-android-tables: Add support for Vexia EDU ATLA 10 Bluetooth and
EC battery driver
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- add support for Acer Nitro AN515-58
- Add support for Acer PH14-51
- Add support for Acer Predator PH16-72
- Fix initialization of last_non_turbo_profile
- Ignore AC events
- Implement proper hwmon support
- Improve error handling when reading gaming system information
- Rename ACER_CAP_FAN_SPEED_READ
- simplify platform profile cycling
- use an ACPI bitmap to set the platform profile choices
- Use devm_platform_profile_register()
- use new helper function for setting overclocks
- use WMI calls for platform profile handling
ACPI: platform-profile:
- Add a name member to handlers
ACPI: platform_profile:
- Add a prefix to log messages
- Add choices attribute for class interface
- Add concept of a "custom" profile
- Add device pointer into platform profile handler
- Add devm_platform_profile_register()
- Add documentation
- Add name attribute to class interface
- Add `ops` member to handlers
- Add platform handler argument to platform_profile_remove()
- Add `probe` to platform_profile_ops
- Add profile attribute for class interface
- Allow multiple handlers
- Check all profile handler to calculate next
- Clean platform_profile_handler
- Create class for ACPI platform profile
- Let drivers set drvdata to the class device
- Make sure all profile handlers agree on profile
- Move matching string for new profile out of mutex
- Move platform_profile_handler
- Move sanity check out of the mutex
- Notify change events on register and unregister
- Notify class device from platform_profile_notify()
- Only show profiles common for all handlers
- Pass the profile handler into platform_profile_notify()
- Remove platform_profile_handler from callbacks
- Remove platform_profile_handler from exported symbols
- Replace *class_dev member with class_dev
- Use guard(mutex) for register/unregister
- Use `scoped_cond_guard`
alienware_wmi:
- General cleanup of WMAX methods
alienware-wmi:
- Improve hdmi_mux, amplifier and deepslp group creation
- Improve rgb-zones group creation
- Modify parse_rgb() signature
- Move Lighting Control State
- Remove unnecessary check at module exit
- Use devm_platform_profile_register()
amd/hsmp:
- Add support for HSMP protocol version 7 messages
- Constify 'struct bin_attribute'
amd/pmc:
- Add STB support for AMD Desktop variants
- Define enum for S2D/PMC msg_port and add helper function
- Isolate STB code changes to a new file
- Move STB block into amd_pmc_s2d_init()
- Move STB functionality to a new file for better code organization
- Update function names to align with new STB file
- Update IP information structure for newer SoCs
- Update S2D message id for 1Ah Family 70h model
- Use ARRAY_SIZE() to fill num_ips information
amd: pmc:
- Use guard(mutex)
amd: pmf:
- Drop all quirks
amd/pmf:
- Enable Custom BIOS Inputs for PMF-TA
- Get SRA sensor data from AMD SFH driver
amd: pmf: sps:
- Use devm_platform_profile_register()
amd: pmf:
- Switch to guard(mutex)
asus-wmi:
- Use devm_platform_profile_register()
dell: dcdbas:
- Constify 'struct bin_attribute'
dell: dell-pc:
- Create platform device
dell-pc:
- Use devm_platform_profile_register()
dell_rbu:
- Constify 'struct bin_attribute'
dell-smo8800:
- Add a couple more models to lis3lv02d_devices[]
- Add support for probing for the accelerometer i2c address
- Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- Move SMO88xx acpi_device_ids to dell-smo8800-ids.h
dell-sysman:
- Directly use firmware_attributes_class
dell-uart-backlight:
- Use blacklight power constant
docs: platform/x86: wmi:
- mention tool for invoking WMI methods
Documentation/ABI:
- Add document for Mellanox PMC driver
- Add new sysfs field to sysfs-platform-mellanox-pmc
Documentation:
- Add documentation about class interface for platform profiles
firmware_attributes_class:
- Drop lifecycle functions
- Move include linux/device/class.h
- Simplify API
fujitsu-laptop:
- replace strcpy -> strscpy
HID: amd_sfh:
- Add support to export device operating states
hp-bioscfg:
- Directly use firmware_attributes_class
hp-wmi:
- Add fan and thermal profile support for Victus 16-s1000
- Use devm_platform_profile_register()
ideapad-laptop:
- Use devm_platform_profile_register()
Input:
- allocate keycode for phone linking
- i8042 - Add support for platform filter contexts
inspur_platform_profile:
- Use devm_platform_profile_register()
int3472:
- Check for adev == NULL
- Debug log the sensor name
- Fix skl_int3472_handle_gpio_resources() return value
- Make "pin number mismatch" message a debug message
intel: bytcrc_pwrsrc:
- fix power_supply dependency
- Optionally register a power_supply dev
intel: int0002_vgpio:
- Make the irqchip immutable
intel/pmt:
- Constify 'struct bin_attribute'
intel: punit_ipc:
- Remove unused function
intel/sdsi:
- Constify 'struct bin_attribute'
intel/tpmi/plr:
- Make char[] longer to silence warning
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACESS
MAINTAINERS:
- Change AMD PMC driver status to "Supported"
mlxbf-bootctl:
- Constify 'struct bin_attribute'
- use sysfs_emit() instead of sprintf()
mlxbf-pmc:
- Add support for clock_measure performance block
- Add support for monitoring cycle count
- incorrect type in assignment
mlxreg-hotplug:
- use sysfs_emit() instead of sprintf()
mlxreg-io:
- use sysfs_emit() instead of sprintf()
quickstart:
- don't include 'pm_wakeup.h' directly
serdev_helpers:
- Add get_serdev_controller_from_parent() helper
- Check for serial_ctrl_uid == NULL
surface: surface_platform_profile:
- Use devm_platform_profile_register()
think-lmi:
- Directly use firmware_attributes_class
thinkpad_acpi:
- Add support for new phone link hotkey
thinkpad-acpi:
- replace strcpy with strscpy
thinkpad_acpi:
- Use devm_platform_profile_register()
tools/power/x86/intel-speed-select:
- Fix TRL restore after SST-TF disable
- v1.21 release
wmi-bmof:
- Make use of .bin_size() callback
x86-android-tablets:
- Add Bluetooth support for Vexia EDU ATLA 10
- Add missing __init to get_i2c_adap_by_*()
- Add support for getting serdev-controller by PCI parent
- Add Vexia EDU ATLA 10 EC battery driver
- Change x86_instantiate_serdev() prototype
- make platform data be static
- Make variables only used locally static
- Store serdev-controller ACPI HID + UID in a union
Merges:
- Merge branch 'fixes' into 'for-next'
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
- Merge branch 'platform-drivers-x86-platform-profile' into for-next
- Merge branch 'platform-drivers-x86-platform-profile' into for-next
- Merge import NS conversion from 'https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ5JDNAAKCRBZrE9hU+XO
MT3AAP9YSYaWZUEgV9T/De2C/ksx0XfmHULmtQHccMgqIsIxmAEAmsBOHsDozPuZ
9F2IbT4uBuQo2iwbGq0DhVd+N36kEQw=
=Vz0C
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile with WMI
calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
ACPI:
- platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers concurrently
to avoid the need to quirk which handler takes precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside the
pre-defined profile
- Abstract and layer platform_profile API better using the class_dev
and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
amd/hsmp:
- Add support for HSMP protocol v7
amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and XPS
9550
- Support probing accelerometer for models yet to be listed in the
DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might be
dangerous)
HID:
- amd_sfh: Add support for exporting SRA sensor data
hp-wmi:
- Add fan and thermal support for Victus 16-s1000
input:
- Add key for phone linking
- i8042: Add context for the i8042 filter to enable cleaning up the
filter related global variables from pdx86 drivers
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS
mellanox mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
thinkpad_acpi:
- Add support for phone link key
tools/power/x86/intel-speed-select:
- Fix Turbo Ratio Limit restore
x86-android-tables:
- Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver
And miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
platform/x86: acer-wmi: Ignore AC events
platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
ACPI: platform_profile: Add a prefix to log messages
ACPI: platform_profile: Add documentation
ACPI: platform_profile: Clean platform_profile_handler
ACPI: platform_profile: Move platform_profile_handler
ACPI: platform_profile: Remove platform_profile_handler from exported symbols
platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
platform/x86: hp-wmi: Use devm_platform_profile_register()
platform/x86: ideapad-laptop: Use devm_platform_profile_register()
platform/x86: dell-pc: Use devm_platform_profile_register()
platform/x86: asus-wmi: Use devm_platform_profile_register()
platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
platform/x86: acer-wmi: Use devm_platform_profile_register()
platform/surface: surface_platform_profile: Use devm_platform_profile_register()
...
- more conversions to the guard notation in the input core
- a fix for NXP BBNSM power key driver to clean up wake IRQ after
unbinding
- several new vendor/device ID pairs added to xpad game controller
driver
- several drivers switched to using str_enable_disable and similar
helpers instead of open-coding
- add mapping for F23 to atkbd driver so that MS "Copilot" key shortcut
works out of the box (if userspace is ready to handle it)
- evbug input handler has been removed (debugging through evdev is
strongly preferred to dumping all events into the kernel log).
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ5ABwgAKCRBAj56VGEWX
nColAQDdu5HPbyeF6ZU6/BqTO1ZhBbcSnaXyDRT0jv0qp0UlQAEA+zc0EPBtx8jE
RumALncq1FZkjHpPDUUmlIrTdiFM4gA=
=whWY
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- more conversions to the guard notation in the input core
- a fix for NXP BBNSM power key driver to clean up wake IRQ after
unbinding
- several new vendor/device ID pairs added to xpad game controller
driver
- several drivers switched to using str_enable_disable and similar
helpers instead of open-coding
- add mapping for F23 to atkbd driver so that MS "Copilot" key shortcut
works out of the box (if userspace is ready to handle it)
- evbug input handler has been removed (debugging through evdev is
strongly preferred to dumping all events into the kernel log).
* tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits)
Input: synaptics - fix crash when enabling pass-through port
Input: atkbd - map F23 key to support default copilot shortcut
Input: xpad - add support for Nacon Evol-X Xbox One Controller
Input: xpad - add unofficial Xbox 360 wireless receiver clone
Input: xpad - add support for wooting two he (arm)
Input: xpad - improve name of 8BitDo controller 2dc8:3106
Input: xpad - add QH Electronics VID/PID
Input: joystick - use str_off_on() helper in sw_connect()
Input: Use str_enable_disable-like helpers
Input: use guard notation in input core
Input: poller - convert locking to guard notation
Input: mt - make use of __free() cleanup facility
Input: mt - convert locking to guard notation
Input: ff-memless - make use of __free() cleanup facility
Input: ff-memless - convert locking to guard notation
Input: ff-core - make use of __free() cleanup facility
Input: ff-core - convert locking to guard notation
Input: remove evbug driver
Input: mma8450 - add chip ID check in probe
Input: bbnsm_pwrkey - add remove hook
...
As reported by the kernel test robot, the following warning occur:
>> drivers/input/touchscreen/wdt87xx_i2c.c:1166:36: warning: 'wdt87xx_acpi_id' defined but not used [-Wunused-const-variable=]
1166 | static const struct acpi_device_id wdt87xx_acpi_id[] = {
| ^~~~~~~~~~~~~~~
The 'wdt87xx_acpi_id' array is only used when CONFIG_ACPI is enabled.
Wrapping its definition and 'MODULE_DEVICE_TABLE' in '#ifdef CONFIG_ACPI'
prevents a compiler warning when ACPI is disabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501181549.uzdlBwuN-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20250119084312.1851486-1-eleanor15x@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When enabling a pass-through port an interrupt might come before psmouse
driver binds to the pass-through port. However synaptics sub-driver
tries to access psmouse instance presumably associated with the
pass-through port to figure out if only 1 byte of response or entire
protocol packet needs to be forwarded to the pass-through port and may
crash if psmouse instance has not been attached to the port yet.
Fix the crash by introducing open() and close() methods for the port and
check if the port is open before trying to access psmouse instance.
Because psmouse calls serio_open() only after attaching psmouse instance
to serio port instance this prevents the potential crash.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 100e16959c ("Input: libps2 - attach ps2dev instances as serio port's drvdata")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1219522
Cc: stable@vger.kernel.org
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/Z4qSHORvPn7EU2j1@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Microsoft defined Meta+Shift+F23 as the Copilot shortcut instead of a
dedicated keycode, and multiple vendors have their keyboards emit this
sequence in response to users pressing a dedicated "Copilot" key.
Unfortunately the default keymap table in atkbd does not map scancode
0x6e (F23) and so the key combination does not work even if userspace
is ready to handle it.
Because this behavior is common between multiple vendors and the
scancode is currently unused map 0x6e to keycode 193 (KEY_F23) so that
key sequence is generated properly.
MS documentation for the scan code:
https://learn.microsoft.com/en-us/windows/win32/inputdev/about-keyboard-input#scan-codes
Confirmed on Lenovo, HP and Dell machines by Canonical.
Tested on Lenovo T14s G6 AMD.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250107034554.25843-1-mpearson-lenovo@squebb.ca
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Although it mimics the Microsoft's VendorID, it is in fact a clone.
Taking into account that the original Microsoft Receiver is not being
manufactured anymore, this drive can solve dpad issues encontered by
those who still use the original 360 Wireless controller
but are using a receiver clone.
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250107192830.414709-12-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
8BitDo Pro 2 Wired Controller shares the same USB identifier
(2dc8:3106) as a different device, so amend name to reflect that and
reduce confusion as the user might think the controller was misdetected.
Because Pro 2 Wired will not work in XTYPE_XBOXONE mode (button presses
won't register), tagging it as XTYPE_XBOX360 remains appropriate.
Signed-off-by: Leonardo Brondani Schenkel <leonardo@schenkel.net>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250107192830.414709-2-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently the platform filter cannot access any driver-specific state
which forces drivers installing a i8042 filter to have at least some
kind of global pointer for their filter.
Allow callers of i8042_install_filter() to submit a context pointer
which is then passed to the i8042 filter. This frees drivers from the
responsibility of having to manage this global pointer themself.
Also introduce a separate type for the i8042 filter (i8042_filter_t)
so that the function definitions can stay compact.
Tested on a Dell Inspiron 3505.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250113221314.435812-1-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114192701.912430-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch input core to use "guard" notation when acquiring spinlocks and
mutexes to simplify the code and ensure that locks are automatically
released when control leaves critical section.
Link: https://lore.kernel.org/r/20241107071538.195340-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Annotate allocated memory with __free(kfree) to simplify the code and
make sure memory is released appropriately.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20241107071538.195340-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Annotate allocated memory with __free(kfree) to simplify the code and
make sure memory is released appropriately.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20241107071538.195340-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use guard() and scoped_guard() notation instead of explicitly acquiring
and releasing spinlocks and mutexes to simplify the code and ensure that
all locks are released properly.
Link: https://lore.kernel.org/r/20241107071538.195340-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
I've never heard of anyone having used this driver for debugging at least
in over past decade or so. Since we have tools like evtest, this driver
seems to be rather superficial.
Also, it apparently causes confusion among people who accidentaly enable
CONFIG_INPUT_EVBUG and are annoyed/confused by their kernel log being
spammed by a lot of useless data.
Let's just remove it.
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/8n377s5p-3r9n-ro38-3r2o-p536745552qo@xreary.bet
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Prevent continuous polling error logs by adding a chip ID check in the
probe function. This ensures the driver only proceeds when the mma8450 is
present, avoiding issues in scenarios like missing add-on cards.
Signed-off-by: Luwei Zhou <b45643@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241216173205.211058-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The MCU controls the power-button and beeper, so expose them as input
device. There is of course no interrupt line, so the status of the
power-button needs to be polled. To generate an event the power-button
also needs to be held for 1-2 seconds, so the polling interval does
not need to be overly fast.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20241107114712.538976-7-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Without remove hook to clear wake irq, there will be kernel dump when
doing module test.
"bbnsm_pwrkey 44440000.bbnsm:pwrkey: wake irq already initialized"
Add remove hook to clear wake irq and set wakeup to false.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: 40e40fdfec ("Input: bbnsm_pwrkey - add bbnsm power key support")
Link: https://lore.kernel.org/r/20241212030322.3110017-1-peng.fan@oss.nxp.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Only some driver-specific properties were accepted, change it
to use the now-available standard properties which are
found in devicetrees containing this chip.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20241205204413.2466775-2-akemnade@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add Nacon Pro Compact to the list of supported devices. These are the
ids of the "Colorlight" variant. The buttons, sticks and vibrations
work. The decorative LEDs on the other hand do not (they stay turned
off).
Signed-off-by: Nicolas Nobelis <nicolas@nobelis.eu>
Link: https://lore.kernel.org/r/20241116182419.33833-1-nicolas@nobelis.eu
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove() method
(from remove_new())
- updates to a number of input drivers to use the new cleanup facilities
(__free(...), guard(), and scoped-guard()) which ensure that the
resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ0PQIAAKCRBAj56VGEWX
nDFFAQCSj3Va9Y6ZgNFvjmPAoA3RmsrvydXMG6PuyHEEfvTtpgD9GPldve3MRqRr
VcrLJXMgyX2+RgpKm1W9ZQgK9Nudegs=
=Ry7d
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove()
method (from remove_new())
- updates to a number of input drivers to use the new cleanup
facilities (__free(...), guard(), and scoped-guard()) which ensure
that the resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
Input: mpr121 - use devm_regulator_get_enable_read_voltage()
Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
Input: spear-keyboard - don't include 'pm_wakeup.h' directly
Input: cypress-sf - constify struct i2c_device_id
Input: ads7846 - increase xfer array size in 'struct ser_req'
Input: fix the input_event struct documentation
Input: i8042 - fix typo dublicate to duplicate
Input: ads7846 - add dummy command register clearing cycle
Input: cs40l50 - fix wrong usage of INIT_WORK()
Input: introduce notion of passive observers for input handlers
Input: maple_keyb - use guard notation when acquiring mutex
Input: locomokbd - use guard notation when acquiring spinlock
Input: hilkbd - use guard notation when acquiring spinlock
Input: synaptics-rmi4 - switch to using cleanup functions in F34
Input: synaptics - fix a typo
dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
Input: omap-keypad - use guard notation when acquiring mutex
Input: imagis - fix warning regarding 'imagis_3038_data' being unused
Input: userio - remove unneeded semicolon
Input: sparcspkr - use cleanup facility for device_node
...
The header clearly states that it does not want to be included directly,
only via 'device.h'. 'platform_device.h' works equally well. Remove the
direct inclusion.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241118072917.3853-7-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The header clearly states that it does not want to be included directly,
only via 'device.h'. 'platform_device.h' works equally well. Remove the
direct inclusion.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241118072917.3853-6-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
'struct i2c_device_id' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
6438 618 0 7056 1b90 drivers/input/keyboard/cypress-sf.o
After:
=====
text data bss dec hex filename
6502 554 0 7056 1b90 drivers/input/keyboard/cypress-sf.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4bc3e3b4d10223d9df850fe4ba48f1cefd197082.1731689418.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Clang warns (or errors with CONFIG_WERROR=y, trimmed for brevity):
drivers/input/touchscreen/ads7846.c:412:2: error: array index 6 is past the end of the array (that has type 'struct spi_transfer[6]') [-Werror,-Warray-bounds]
412 | req->xfer[6].tx_buf = &req->scratch;
| ^ ~
...
drivers/input/touchscreen/ads7846.c:416:2: error: array index 7 is past the end of the array (that has type 'struct spi_transfer[6]') [-Werror,-Warray-bounds]
416 | req->xfer[7].rx_buf = &req->scratch;
| ^ ~
drivers/input/touchscreen/ads7846.c:334:2: note: array 'xfer' declared here
334 | struct spi_transfer xfer[6];
| ^
Increase the size of xfer in 'struct ser_req' to ensure that there is
enough space for all necessary members and there are no out of bounds
accesses, clearing up the warning.
Fixes: 781a07da9b ("Input: ads7846 - add dummy command register clearing cycle")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20241111-input-ads7846-increase-xfer-array-size-v1-1-06cd92e9f20f@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On STM32MP135F with XPT2046 touch controller attached to SPI bus, it has
been observed that the touch controller locks up after Linux kernel has
finished booting. Adding a dummy cycle on the SPI bus seems to mitigate
the lock up.
The XPTEK XPT2046 controller seems to be an identical clone of TI TSC2046,
the datasheet seems to be a clone of the TI part as well, text seem to be
word to word identical, except all the pictures have been drawn again.
This touch controller is present e.g. on WaveShare 3.2inch RPi LCD (B)
panel, the DTO provided by WaveShare uses 50 kHz SPI clock for this
touch controller, which is unusually low and possibly might have been
used as some sort of workaround for an issue. The SPI LCD on the same
bus uses 16 MHz clock.
SPI bus DT properties spi-cs-setup-delay-ns, spi-cs-hold-delay-ns,
spi-cs-inactive-delay-ns, spi-rx-delay-us, spi-tx-delay-us set to
range of 500ns..5us seem to have no impact on the behavior of the
touch controller, the lock up always occurs. The STM32MP13xx SPI
controller users GPIO control for the nCS pins.
Since the dummy cycle happens after the controller has been put into
power down mode and both ADC and REF regulators have been disabled,
the cycle should have no impact on the configuration of the controller,
i.e. it should be a NOP.
It is unclear whether this problem is specific to this cloned XPT2046
controller, or whether this is also present on TSC2046. A test on
either TSC2046 or ADS7846 would be very welcome.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240320072533.170029-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In cs40l50_add(), the work_data is a local variable and the work_data.work
should initialize with INIT_WORK_ONSTACK() instead of INIT_WORK().
Small error in cs40l50_erase() also fixed in this commit.
Fixes: c38fe1bb5d ("Input: cs40l50 - Add support for the CS40L50 haptic driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: James Ogletree <jogletre@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20241106013549.78142-1-yuancan@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Sometimes it is useful to observe (and maybe modify) data coming from
an input device, but only do that if there are other users of such input
device. An example is touchpad switching functionality on Lenovo IdeaPad
Z570 where it is desirable to suppress events coming from the touchpad
if user toggles touchpad on/off button (on this laptop the firmware does
not stop the device).
Introduce notion of passive observers for input handlers to solve this
issue. An input handler marked as passive observer behaves exactly like
any other input handler or filter, but with one exception: it does not
open/start underlying input device when attaching to it.
Link: https://lore.kernel.org/r/ZxlEROX7bMo5cbZP@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/Zx8mGiWOw1Av28TX@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/Zxr4AMJrzhZlHAlf@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/Zxr30BpPobpM65vO@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Start using __free() and guard() primitives to simplify the code
and error handling.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/Zxwd9c0njasZZoal@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a fix for regression in input core introduced in 6.11 preventing
re-registering input handlers
- a fix for adp5588-keys driver tyring to disable interrupt 0 at suspend
when devices is used without interrupt
- a fix for edt-ft5x06 to stop leaking regmap structure when probing
fails and to make sure it is not released too early on removal.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZycQwgAKCRBAj56VGEWX
nFgtAQDxuWplL+cwA5f3g+/Rq38faHBY5ebmsC9G/QnBZs4hTQD/dL04tU9NwvNq
GYw4MYRNaDIeY8vyq21Y+dQe0uL0rAM=
=xAeU
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for regression in input core introduced in 6.11 preventing
re-registering input handlers
- a fix for adp5588-keys driver tyring to disable interrupt 0 at
suspend when devices is used without interrupt
- a fix for edt-ft5x06 to stop leaking regmap structure when probing
fails and to make sure it is not released too early on removal.
* tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: fix regression when re-registering input handlers
Input: adp5588-keys - do not try to disable interrupt 0
Input: edt-ft5x06 - fix regmap leak when probe fails
Commit d469647baf ("Input: simplify event handling logic") introduced
code that would set handler->events() method to either
input_handler_events_filter() or input_handler_events_default() or
input_handler_events_null(), depending on the kind of input handler
(a filter or a regular one) we are dealing with. Unfortunately this
breaks cases when we try to re-register the same filter (as is the case
with sysrq handler): after initial registration the handler will have 2
event handling methods defined, and will run afoul of the check in
input_handler_check_methods():
input: input_handler_check_methods: only one event processing method can be defined (sysrq)
sysrq: Failed to register input handler, error -22
Fix this by adding handle_events() method to input_handle structure and
setting it up when registering a new input handle according to event
handling methods defined in associated input_handler structure, thus
avoiding modifying the input_handler structure.
Reported-by: "Ned T. Crigler" <crigler@gmail.com>
Reported-by: Christian Heusel <christian@heusel.eu>
Tested-by: "Ned T. Crigler" <crigler@gmail.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Fixes: d469647baf ("Input: simplify event handling logic")
Link: https://lore.kernel.org/r/Zx2iQp6csn42PJA7@xavtug
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/Zxr4nF-igbrmgq85@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit dc748812fc ("Input: adp5588-keys - add support for pure gpio")
made having interrupt line optional for the device, however it neglected
to update suspend and resume handlers that try to disable interrupts
for the duration of suspend.
Fix this by checking if interrupt number assigned to the i2c device is
not 0 before trying to disable or reenable it.
Fixes: dc748812fc ("Input: adp5588-keys - add support for pure gpio")
Link: https://lore.kernel.org/r/Zv_2jEMYSWDw2gKs@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver neglects to free the instance of I2C regmap constructed at
the beginning of the edt_ft5x06_ts_probe() method when probe fails.
Additionally edt_ft5x06_ts_remove() is freeing the regmap too early,
before the rest of the device resources that are managed by devm are
released.
Fix this by installing a custom devm action that will ensure that the
regmap is released at the right time during normal teardown as well as
in case of probe failure.
Note that devm_regmap_init_i2c() could not be used because the driver
may replace the original regmap with a regmap specific for M06 devices
in the middle of the probe, and using devm_regmap_init_i2c() would
result in releasing the M06 regmap too early.
Reported-by: Li Zetao <lizetao1@huawei.com>
Fixes: 9dfd9708ff ("Input: edt-ft5x06 - convert to use regmap API")
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/ZxL6rIlVlgsAu-Jv@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fix the following compilation warnings:
drivers/input/touchscreen/imagis.c:422:39: warning: ‘imagis_3038c_data’
defined but not used [-Wunused-const-variable=]
422 | static const struct imagis_properties imagis_3038c_data = {
drivers/input/touchscreen/imagis.c:415:39: warning: ‘imagis_3038b_data’
defined but not used [-Wunused-const-variable=]
415 | static const struct imagis_properties imagis_3038b_data = {
drivers/input/touchscreen/imagis.c:407:39: warning: ‘imagis_3038_data’
defined but not used [-Wunused-const-variable=]
407 | static const struct imagis_properties imagis_3038_data = {
drivers/input/touchscreen/imagis.c:398:39: warning: ‘imagis_3032c_data’
defined but not used [-Wunused-const-variable=]
398 | static const struct imagis_properties imagis_3032c_data = {
Only define the variables 'imagis_303*_data' when the CONFIG_OF
is enabled.
Fixes: 1e48ee99f6 ("Input: imagis - add supports for Imagis IST3038")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Acked-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20241023094831.1680214-1-zengheng4@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the 'free(device_node)' macro to simplify the code by automatically
freeing the device node, which removes the need for explicit calls to
'of_node_put()'.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241021-input_automate_of_node_put-v3-2-cc73f636e1bc@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use devm_kzalloc() in bbc_bee_probe() and grover_beep_probe() to
automatically free 'state' when the device is removed. Drop the
kfree(state) calls from the probe error paths and the remove functions
accordingly.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241021-input_automate_of_node_put-v3-1-cc73f636e1bc@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Recent conversion of the driver to use guard notation for locks and
other resources introduced a bug: "written" variable that is supposed to
hold number of bytes successfully written was not initialized.
Fix it by initializing the variable with 0.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410201730.ItNhUTIv-lkp@intel.com/
Fixes: 5b53a9d40c ("Input: serio_raw - use guard notation for locks and other resources")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the '__free(device_node)' macro to automatically free the device
node, removing the need for explicit calls to 'of_node_put()' to
decrement its refcount.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-10-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the '__free(device_node)' macro to automatically free the device
node, removing the need for explicit calls to 'of_node_put()' to
decrement its refcount.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-9-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the '__free(device_node)' macro to automatically free the device
node, removing the need for explicit calls to 'of_node_put()' to
decrement its refcount.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-8-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the '__free(device_node)' macro to simplify the code and error
handling. This makes the code more robust by ensuring that the device
node is always freed.
Drop the first assignment to 'pdev->dev.parent->of_node', as it was only
a shortcut, and tie 'np' to its usage as a child node.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-7-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the '__free(device_node)' macro to simplify the code and error
handling. This makes the error handling more robust by ensuring that the
device node is always freed.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-4-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the scoped variant of the macro to simplify the code and error
handling. This makes the error handling more robust by ensuring that
the child node is always freed.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-3-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the scoped variant of the macro to simplify the code and error
handling. This makes the error handling more robust by ensuring that
the child node is always freed.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-2-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the scoped variant of the macro to simplify the code and error
handling. This makes the error handling more robust by ensuring that
the child node is always freed.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-1-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a fix for Zinitix driver to not fail probing if property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support
for more hardware.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZxMk3gAKCRBAj56VGEWX
nHcXAP99ROP6m6hoGUEvCKVtWQuuKPxJTMByLpdpHdTcX15HdQD9GB9HBVnBdIV5
hckmsRPttRfhUIlMyWWR54anNidx4ww=
=yn7x
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for Zinitix driver to not fail probing if the property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support for
more hardware
* tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - don't fail if linux,keycodes prop is absent
Input: xpad - add support for MSI Claw A1M
Input: xpad - add support for 8BitDo Ultimate 2C Wireless Controller
When initially adding the touchkey support, a mistake was made in the
property parsing code. The possible negative errno from
device_property_count_u32() was never checked, which was an oversight
left from converting to it from the of_property as part of the review
fixes.
Re-add the correct handling of the absent property, in which case zero
touchkeys should be assumed, which would disable the feature.
Reported-by: Jakob Hauser <jahau@rocketmail.com>
Tested-by: Jakob Hauser <jahau@rocketmail.com>
Fixes: 075d9b22c8 ("Input: zinitix - add touchkey support")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Tested-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20241004-zinitix-no-keycodes-v2-1-876dc9fea4b6@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add MSI Claw A1M controller to xpad_device match table when in xinput mode.
Add MSI VID as XPAD_XBOX360_VENDOR.
Signed-off-by: John Edwards <uejji@uejji.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Christopher Snowhill <kode54@gmail.com>
Link: https://lore.kernel.org/r/20241010232020.3292284-4-uejji@uejji.net
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/input/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in a few drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241008090009.462836-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-25-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-23-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When compiling with W=1 the following warnings are triggered:
drivers/input/serio/serio_raw.c: In function ‘serio_raw_connect’:
drivers/input/serio/serio_raw.c:303:28: error: ‘%ld’ directive output may be truncated writing between 1 and 11 bytes into a region of size 7 [-Werror=format-truncation=]
303 | "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no));
atomic_inc_return() returns an int, so there is no reason to cast it
to long and print as such. Fix the issue by removing the cast,
printing it as unsigned decimal, and expanding the name from 16 to 20
bytes to accommodate the largest possible port number.
Link: https://lore.kernel.org/r/20240905041732.2034348-22-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use guard notation when acquiring mutexes and spinlocks, and when
pausing and resuming serio port. Such guard notation makes the code
more compact and error handling more robust by ensuring that locks
are released in all code paths when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-21-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-20-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-19-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-18-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-17-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-16-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-15-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-14-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-12-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-11-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-10-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240905041732.2034348-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044938.1049843-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044929.1049700-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/ZtjJKxQRRzJE0aWZ@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044914.1049280-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044902.1049017-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/ZtjKJsArLu3byTU6@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044834.1048468-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(fwnode_handle) cleanup facility to ensure that references to
acquired fwnodes are dropped at appropriate times automatically.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240904044825.1048256-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(fwnode_handle) cleanup facility to ensure that references to
acquired fwnodes are dropped at appropriate times automatically.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044814.1048062-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(fwnode_handle) cleanup facility to ensure that references to
acquired fwnodes are dropped at appropriate times automatically.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044806.1047847-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240904044756.1047629-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044735.1047285-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-11-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-10-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released and interrupts are
re-enabled in all code paths when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240904043104.1030257-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240904043104.1030257-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240904043104.1030257-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240904043104.1030257-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240904043104.1030257-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240904043104.1030257-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Start using __free() and guard() primitives to simplify the code
and error handling. This makes the code more compact and error
handling more robust by ensuring that locks are released in all
code paths when control leaves critical section and all allocated
memory is freed.
Link: https://lore.kernel.org/r/ZsrBC7qDbOvAaI-W@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This makes the code more compact and error handling more robust
by ensuring that mutexes are released in all code paths when control
leaves critical section.
Link: https://lore.kernel.org/r/ZsrAa9XcDvHeIs9T@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZv3NAgAKCRBZ7Krx/gZQ
68kbAP0YzQxUgl0/o7Soda8XwKSPZTM9ls6kRk1UHTTG/i4ZigEA/G+i/mBQctL0
AB911kK8mxfXppfOXzstFBjoJSqiigQ=
=IE7D
-----END PGP SIGNATURE-----
Merge tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull generic unaligned.h cleanups from Al Viro:
"Get rid of architecture-specific <asm/unaligned.h> includes, replacing
them with a single generic <linux/unaligned.h> header file.
It's the second largest (after asm/io.h) class of asm/* includes, and
all but two architectures actually end up using exact same file.
Massage the remaining two (arc and parisc) to do the same and just
move the thing to from asm-generic/unaligned.h to linux/unaligned.h"
[ This is one of those things that we're better off doing outside the
merge window, and would only cause extra conflict noise if it was in
linux-next for the next release due to all the trivial #include line
updates. Rip off the band-aid. - Linus ]
* tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move asm/unaligned.h to linux/unaligned.h
arc: get rid of private asm/unaligned.h
parisc: get rid of private asm/unaligned.h
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
- a couple fixups for adp5589-keys driver
- recently added driver for PixArt PS/2 touchpads is dropped temporarily
because its detection routine is too greedy and mis-identifies devices
from other vendors as PixArt devices.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZv0LRAAKCRBAj56VGEWX
nM7OAP495t23Ay4H7qBnVEv4KHrOkNLwebKudwcokjWQAdnOPgEAu0GfslScWdrO
yYofhsjrph1V2dQOWqoLnd1C4iiHVgA=
=HQCS
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple fixups for adp5589-keys driver
- recently added driver for PixArt PS/2 touchpads is dropped
temporarily because its detection routine is too greedy and
mis-identifies devices from other vendors as PixArt devices
* tag 'input-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: adp5589-keys - fix adp5589_gpio_get_value()
Input: adp5589-keys - fix NULL pointer dereference
Revert "Input: Add driver for PixArt PS/2 touchpad"
The adp5589 seems to have the same behavior as similar devices as
explained in commit 910a9f5636 ("Input: adp5588-keys - get value from
data out when dir is out").
Basically, when the gpio is set as output we need to get the value from
ADP5589_GPO_DATA_OUT_A register instead of ADP5589_GPI_STATUS_A.
Fixes: 9d2e173644 ("Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-2-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We register a devm action to call adp5589_clear_config() and then pass
the i2c client as argument so that we can call i2c_get_clientdata() in
order to get our device object. However, i2c_set_clientdata() is only
being set at the end of the probe function which means that we'll get a
NULL pointer dereference in case the probe function fails early.
Fixes: 30df385e35 ("Input: adp5589-keys - use devm_add_action_or_reset() for register clear")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-1-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This reverts commit 740ff03d72 because
current PixArt detection is too greedy and claims devices that are
not PixArt.
Reported-by: Benjamin Tissoires <bentiss@kernel.org>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2314756
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit fixes several typographical errors in comments within
the driver/input directory. No functional changes are made.
Detected using codespell.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/20240926031457.3479350-1-yujiaoliang@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Extend the novatek touchscreen driver to support NT36672A chip which
is found in phones like qcom/sdm845-xiaomi-beryllium-tianma.dts.
Added devicetree support for the driver and used i2c chip data to handle
the variation in chip id and wake type. Also added vcc and iovcc
regulators which are used to power the touchscreen hardware.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-3-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is done in preparation to introduce other variants of the Novatek NVT
touchscreen controller that can be supported by the driver.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-1-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch IC
registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup functions
to simplify releasing of resources (with more drivers to follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZvGnWgAKCRBAj56VGEWX
nDjGAQCHcRk1icJlyjx3KA85gdILriDB9zMNJnCnbYXrSfGbOQD+LZNjO3po26zB
wloLEYTKRu3E/oWEI8VcfIN2m89vxw4=
=bDsb
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240920153430.503212-12-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
"mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to
provide (much) more accurate results. The current implementation was
causing Uwe some issues in the PWM drivers.
"xz: Updates to license, filters, and compression options" from Lasse
Collin. Miscellaneous maintenance and kinor feature work to the xz
decompressor.
"Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee.
Fixes and enhancements to the gdb scripts.
"treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson.
Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this.
"nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds
various commonly-available ioctls to nilfs2.
"This series fixes a number of formatting issues in kernel doc comments"
from Ryusuke Konishi does that.
"nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix
issues where -ENOENT was being unintentionally and inappropriately
returned to userspace.
"nilfs2: assorted cleanups" from Huang Xiaojia.
"nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2 filesystems.
"scripts/decode_stacktrace.sh: improve error reporting and usability" from
Luca Ceresoli does those things.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu7dpAAKCRDdBJ7gKXxA
jsPqAPwMDEZyKlfSw7QioEHNHDkmkbP7VYCYR0CbUnppbztwpAD8D37aVbWQ+UzM
3nnOq3W2Pc2o/20zqi8Upf1mnvUrygQ=
=/NWE
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
During adp5588_setup(), we read all the events to clear the event FIFO.
However, adp5588_read() just calls i2c_smbus_read_byte_data() which
returns the byte read in case everything goes well. Hence, we need to
explicitly check for a negative error code instead of checking for
something different than 0.
Fixes: e960309ce3 ("Input: adp5588-keys - bail out on returned error")
Cc: stable@vger.kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240920-fix-adp5588-err-check-v1-1-81f6e957ef24@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://lore.kernel.org/r/20240918032246.9147-1-shenlichuan@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver updates seem larger this time around, with changes
is many of the SoC specific drivers, both the custom drivers/soc
ones and the closely related subsystems (memory, bus, firmware,
reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and
power management code. This is the latest variant of one of the
oldest still supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in many
of their drivers to add more features and additional SoC support. Most
of these are somewhat firmware related as the platform has a number of
firmware based interfaces to the kernel. A notable addition here is the
inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly cleanups.
The Arm SCMI firmware driver gets a major rework to modularize
the existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a
number of smaller updates.
The Arm FF-A firmware driver gets a feature update to support
the v1.2 version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring
for Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra, amlogic,
mediatek) drivers and their DT bindings.
-----BEGIN PGP SIGNATURE-----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=EauF
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEwAAKCRCRxhvAZXjc
osS0AQCgIpvey9oW5DMyMw6Bv0hFMRv95gbNQZfHy09iK+NMNAD9GALhb/4cMIVB
7YrZGXEz454lpgcs8AnrOVjVNfctOQg=
=e9s9
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This is the work to cleanup and shrink struct file significantly.
Right now, (focusing on x86) struct file is 232 bytes. After this
series struct file will be 184 bytes aka 3 cacheline and a spare 8
bytes for future extensions at the end of the struct.
With struct file being as ubiquitous as it is this should make a
difference for file heavy workloads and allow further optimizations in
the future.
- struct fown_struct was embedded into struct file letting it take up
32 bytes in total when really it shouldn't even be embedded in
struct file in the first place. Instead, actual users of struct
fown_struct now allocate the struct on demand. This frees up 24
bytes.
- Move struct file_ra_state into the union containg the cleanup hooks
and move f_iocb_flags out of the union. This closes a 4 byte hole
we created earlier and brings struct file to 192 bytes. Which means
struct file is 3 cachelines and we managed to shrink it by 40
bytes.
- Reorder struct file so that nothing crosses a cacheline.
I suspect that in the future we will end up reordering some members
to mitigate false sharing issues or just because someone does
actually provide really good perf data.
- Shrinking struct file to 192 bytes is only part of the work.
Files use a slab that is SLAB_TYPESAFE_BY_RCU and when a kmem cache
is created with SLAB_TYPESAFE_BY_RCU the free pointer must be
located outside of the object because the cache doesn't know what
part of the memory can safely be overwritten as it may be needed to
prevent object recycling.
That has the consequence that SLAB_TYPESAFE_BY_RCU may end up
adding a new cacheline.
So this also contains work to add a new kmem_cache_create_rcu()
function that allows the caller to specify an offset where the
freelist pointer is supposed to be placed. Thus avoiding the
implicit addition of a fourth cacheline.
- And finally this removes the f_version member in struct file.
The f_version member isn't particularly well-defined. It is mainly
used as a cookie to detect concurrent seeks when iterating
directories. But it is also abused by some subsystems for
completely unrelated things.
It is mostly a directory and filesystem specific thing that doesn't
really need to live in struct file and with its wonky semantics it
really lacks a specific function.
For pipes, f_version is (ab)used to defer poll notifications until
a write has happened. And struct pipe_inode_info is used by
multiple struct files in their ->private_data so there's no chance
of pushing that down into file->private_data without introducing
another pointer indirection.
But pipes don't rely on f_pos_lock so this adds a union into struct
file encompassing f_pos_lock and a pipe specific f_pipe member that
pipes can use. This union of course can be extended to other file
types and is similar to what we do in struct inode already"
* tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
fs: remove f_version
pipe: use f_pipe
fs: add f_pipe
ubifs: store cookie in private data
ufs: store cookie in private data
udf: store cookie in private data
proc: store cookie in private data
ocfs2: store cookie in private data
input: remove f_version abuse
ext4: store cookie in private data
ext2: store cookie in private data
affs: store cookie in private data
fs: add generic_llseek_cookie()
fs: use must_set_pos()
fs: add must_set_pos()
fs: add vfs_setpos_cookie()
s390: remove unused f_version
ceph: remove unused f_version
adi: remove unused f_version
mm: Removed @freeptr_offset to prevent doc warning
...
The Gen6 devices have the same problem and the same Solution as the Gen5
ones.
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240910094008.1601230-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There's no need to get the length of an DT array property before
parsing the array. of_property_read_variable_u32_array() takes a
minimum and maximum length and returns the actual length (or error
code).
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT property data
pointer which is a problem for dynamically allocated nodes which may
be freed.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240913200827.546649-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 9ee0a05588 ("Input: PS/2 gpio bit banging driver for serio bus")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20240912033013.2610949-1-ruanjinjie@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- drop flags, they were not used anyway
- add OF ID match table
- process "autorepeat", "debounce-delay-ms", prescale from device tree
- drop platform data usage and it's header
- keymap goes from device tree now on
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
f_version is removed from struct file. Make input stop abusing f_version
for stashing information for poll. Move the input state counter into
input_seq_state and allocate it via seq_private_open() and free via
seq_release_private().
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-12-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The driver waits for the device to boot, which can be a lengthy
process. Switch it to asynchronous probing to allow more devices
to be probed simultaneously.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-19-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stop forcing interrupt to be low level triggered and instead rely on the
platform to define proper trigger to allow flexibility in board designs.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-17-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver does not actively manage regulator state past probe() time,
so we can use devm_regulator_get_enable() to simplify the code.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-16-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This regulator is not optional from the controller point of view,
so stop treating it as such. For hard-wired designs that omit the
regulator from their device trees regulator subsystem will create
a dummy instance.
This may introduce unnecessary delay of 100us in case of dummy
regulator, but if it is important the driver should be marked as
using asynchronous probing to avoid even longer delays waiting for
the command completions.
Also use usleep_range() instead of udelay() to avoid spinning.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-15-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use dev_err_probe() helper to log deferrals in the devices_deferred
debugfs file and avoid extra messages in the logs.
Also rename "ret" variables holding error codes only to "error".
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-13-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We should abort probe on any error besides -ENOENT which signifies that
the regulator is not defined in device tree or elsewhere, not only
when we see -EPROBE_DEFER.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-12-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Zforce touch data packet consists of a byte representing number of
contacts followed by several chunks with length of 9 bytes representing
each contact. Instead of accounting for the leading byte by increasing
offset of each field in contacts by one introduce a pointer to contact
data and point it appropriately. This avoids awkward constructs like:
point.prblty = payload[9 * i + 9];
which makes it seem like there is off-by-one error, in favor of more
straightforward:
point.prblty = p[8];
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-11-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of doing conversion from little-endian data to CPU endianness
by hand use existing helpers.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-10-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation allows for simpler code and ensures that mutexes are
automatically released in all code paths.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
