Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
-----BEGIN PGP SIGNATURE-----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=4ayG
-----END PGP SIGNATURE-----
Merge tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features, cleanup for 7.3
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
* tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits)
iio: dac: mcp47a1: add support for new device
dt-bindings: iio: dac: add support for mcp47a1
iio: Update email for Maxwell Doose
iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion
iio: light: cm32181: return zero after writing calibscale
iio: flow: add Sensirion SLF3S liquid flow sensor driver
iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
iio: types: add IIO_VOLUMEFLOW channel type
iio: ABI: Encourage differential voltage ABI usage
iio: adc: ltc2378: Add support for LTC2338-18
iio: adc: ltc2378: Enable triggered buffer data capture
iio: adc: ltc2378: Enable high-speed data capture
iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
dt-bindings: iio: adc: Add ltc2378
iio: magnetometer: ak8974: remove conditional return with no effect
iio: light: tsl2583: remove conditional return with no effect
iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper
iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper
iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper
...
Given timing these are probably now merge window material.
Usual mixed bunch of ancient issues and newer ones.
core,buffer
- Fix a potential UAF in release on anonymous buffers.
- Make sure DMA fence lock lifetime matches that of the DMA fence.
- Make IIO DMA fence release RCU safe.
various
- Kconfig missing REGMAP* related selects.
- Unbalance of runtime pm or regulators in error paths.
adi,ad3552r-hs
- Fixing wrong buffers size for string printing.
adi,ad4080
- Fix 16-bit part support by adding path to tell the backend what
the data size is - avoiding corrupted data capture.
adi,ad5446
- Wrong MODULE_DEVICE_TABLE() type due to case error.
atlas,sensor
- Drop use of irq_work() in favour of iio_trigger_poll_nested() avoiding
a possible UAF.
hid-temperature
- Potential release ordering issue due to mixed devm and not that
can lead to long timeouts.
infineon,dps310
- Fix NULL dereference on ACPI platforms.
invense,mpu3050
- Fix sign of raw angular velocity readings.
mitsubishi,m62332
- Fix a regulator reference counting issue when switching channels.
sharp,gp2ap002
- Unbalanced runtime PM on repeated event writes.
- Reenable irq if runtime suspend fails.
ti,ads7138
- Disable statistics gathering whilst reading conversions results
to avoid data corruption.
ti,opt4001
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Fix use of wrong register.
- Pointer type mismatch to div_u64_rem()
- Fix reversed GENMASK() arguements.
ti,opt4060
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Pointer type mismatch to div_u64_rem()
- Wrong register name in an error print.
ti,pac1921
- Fix wrong channel used in the trigger handler for some combinations
of enabled channels.
-----BEGIN PGP SIGNATURE-----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=N4R+
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-7.2b-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of fixes for the 7.2 cycle.
Given timing these are probably now merge window material.
Usual mixed bunch of ancient issues and newer ones.
core,buffer
- Fix a potential UAF in release on anonymous buffers.
- Make sure DMA fence lock lifetime matches that of the DMA fence.
- Make IIO DMA fence release RCU safe.
various
- Kconfig missing REGMAP* related selects.
- Unbalance of runtime pm or regulators in error paths.
adi,ad3552r-hs
- Fixing wrong buffers size for string printing.
adi,ad4080
- Fix 16-bit part support by adding path to tell the backend what
the data size is - avoiding corrupted data capture.
adi,ad5446
- Wrong MODULE_DEVICE_TABLE() type due to case error.
atlas,sensor
- Drop use of irq_work() in favour of iio_trigger_poll_nested() avoiding
a possible UAF.
hid-temperature
- Potential release ordering issue due to mixed devm and not that
can lead to long timeouts.
infineon,dps310
- Fix NULL dereference on ACPI platforms.
invense,mpu3050
- Fix sign of raw angular velocity readings.
mitsubishi,m62332
- Fix a regulator reference counting issue when switching channels.
sharp,gp2ap002
- Unbalanced runtime PM on repeated event writes.
- Reenable irq if runtime suspend fails.
ti,ads7138
- Disable statistics gathering whilst reading conversions results
to avoid data corruption.
ti,opt4001
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Fix use of wrong register.
- Pointer type mismatch to div_u64_rem()
- Fix reversed GENMASK() arguements.
ti,opt4060
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Pointer type mismatch to div_u64_rem()
- Wrong register name in an error print.
ti,pac1921
- Fix wrong channel used in the trigger handler for some combinations
of enabled channels.
* tag 'iio-fixes-for-7.2b-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (31 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
The ad5446 I2C driver exports its OF match table with
MODULE_DEVICE_TABLE(OF, ...).
The device table type is used by modpost when generating module aliases,
and scripts/mod/file2alias.c matches the lowercase "of" type. Using
"OF" prevents the OF table from being recognized, so no OF module alias is
generated for the I2C driver.
Use the lowercase "of" type so OF-based module autoloading works.
Fixes: 876d940240 ("iio: dac: ad5446: Separate I2C/SPI into different drivers")
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
ad3552r_hs_show_data_source_avail() formats the available data source
names into a 128-byte stack buffer, but bounds each scnprintf() with
PAGE_SIZE instead of the buffer size, so the bound does not protect
the destination at all.
This cannot overflow today - dbgfs_attr_source[] has two entries,
"normal" and "ramp-16bit", 18 bytes formatted - but the bound stops
protecting the stack the day the table grows. Use sizeof(buf) so the
bound matches the destination.
Found by smatch:
drivers/iio/dac/ad3552r-hs.c:593 ad3552r_hs_show_data_source_avail()
error: scnprintf() 'buf[len]' too small (128 vs 4096)
Fixes: b1c5d68ea6 ("iio: dac: ad3552r-hs: add support for internal ramp")
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The Kconfig entry for the MCP47FEB02 is missing a 'select REGMAP_I2C',
causing build failures.
Fixes: bf394cc803 ("iio: dac: adding support for Microchip MCP47FEB02")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The Microchip MCP47A1 is a 6-bit volatile Digital-to-Analog converter
which communicates via I2C.
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add support for AD5313R, AD5317R, AD5674, AD5679, AD5687, AD5687R, AD5689,
AD5689R to the AD5686 SPI driver. Also adding support for AD5316R, AD5675,
AD5697R to the AD5696 I2C driver. This includes the creation of seven chip
info struct instances and reuse of existing ones.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Refactor device list in Kconfig, sorting devices by channel count. Also,
remove device description from file headers. One can rely on the ID
table(s) to check for supported devices. AD5337R is ommited as it does
not seem to exist, i.e. its documentation could not be found.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Populate of_match table with AD5673R/AD5677R entries, already supported by
the driver and available in the id_table.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Most of the supported devices rely on a GAIN pin to control a 2x
multiplier applied to the output voltage. Other devices, e.g. the
single-channel ones, provides a gain control through a bit field in
the control register. Some designs might have the GAIN pin hardwired
to VDD/VLOGIC or GND, which would have no "gain-gpios" device property,
being able to set "adi,range-double" if it is hardwired to VDD. The
vref_mv field is moved down in the struct ad5686_state, so that the
overall size increase is reduced.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Implement trigger handler by leveraging the LDAC gpio to update all DAC
channels at once when it is available. Also, the multiple channel writes
can be flushed at once with the sync() operation.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Use guarded mutex lock to facilitate code review when adding new
attributes. This will allow for early returns, avoiding error-prone
locking and unlocking in error paths. This also adds missing include
linux/cleanup.h. Gain-control support will allow the scale attribute
to be configurable.
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Use of local SPI bus data to manage a collection of SPI transfers and
flush them to the SPI platform driver with the sync() operation. This
allows for faster handling of multiple channel DAC writes, avoiding kernel
overhead per spi_sync() call, which will be helpful when enabling
triggered buffer support. For consistency, the read operation leverages
the same transfer data rather than a stack-allocated array.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add sync() to operation to ad5686_bus_ops, which can be used to flush
multiple pending data transfers at once. This is going to be used when
implementing triggered buffer support.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Replace usage of bit shifting macros for FIELD_PREP(), which would not
ignore bit masking when preparing SPI/I2C commands. This change is a code
hardening measure to be paired with the upcoming triggered buffer support.
For the AD5310 regmap case, 16-bit data coming from the buffer may overlap
with command bits if the data field is unmasked.
*_REF_BIT_MSK and *_PD_MSK bit position macros are renamed (with a DATA
prefix) so to indicate that they are relative to the DATA field.
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/all/20260628143026.EC6CA1F000E9@smtp.kernel.org/
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Verify that chip_info pointer is not NULL. If a user binds the driver
using driver_override via sysfs with a device name not present in the
id_table or of_match_table, match data will be NULL.
Fixes: 0eb1728461 ("iio: dac: ad5686: drop enum id")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/all/20260710113149.53EC51F000E9@smtp.kernel.org/
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for reported
problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCalNPWw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yltzACdFC2/ouvc1ea1jGFBP1ZN4lKU6gAAn1ak5lRK
30pEMSmJwYteOj8AlpuE
=ZIWT
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Android/IIO fixes from Greg KH:
"Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for
reported problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues"
* tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
iio: event: Fix event FIFO reset race
iio: imu: inv_icm42600: fix timestamp clock period by using lower value
iio: light: al3010: fix incorrect scale for the highest gain range
iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for()
iio: light: tsl2591: return actual error from probe IRQ failure
iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading
iio: imu: st_lsm6dsx: deselect shub page before reading whoami
rust_binder: clear freeze listener on node removal
rust_binder: reject context manager self-transaction
rust_binder: use a u64 stride when cleaning up the offsets array
binder: fix UAF in binder_free_transaction()
binder: fix UAF in binder_thread_release()
rust_binder: synchronize Rust Binder stats with freeze commands
binder: cache secctx size before release zeroes it
rust_binder: fix BINDER_GET_EXTENDED_ERROR
iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig
iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig
iio: adc: ti-ads124s08: Return reset GPIO lookup errors
iio: temperature: Build mlx90635 with CONFIG_MLX90635
iio: light: al3320a: add missing REGMAP_I2C to Kconfig
...
m62332_set_value() enables the Vcc regulator on every write of a
non-zero value and disables it on every write of zero, without tracking
the channel's current state. Because the regulator is reference counted,
changing a channel directly from one non-zero value to another enables
it more than once, while a later write of zero disables it only once.
The reference count never returns to zero and the regulator is left
enabled indefinitely.
Only enable the regulator on the transition from zero to non-zero, and
only disable it on the transition from non-zero to zero, using the
previously stored channel value to detect the edge. Balance the
regulator on the I2C error path so the reference count stays consistent
if the write fails.
Fixes: b87b0c0f81 ("iio: add m62332 DAC driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260418130322.106769-1-erick.henrique.rodrigues%40usp.br
Cc: stable@vger.kernel.org
Signed-off-by: Erick Henrique <erick.henrique.rodrigues@usp.br>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmpK+lYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsv8H/Rn7Hr3Hp8t6au8B
xQueZThJWjqQ4v8pyLnXF6OomKiDR24OTXMCrFgDkcmZ7RK2ALqowI3tQVwLUTuI
yUN0qL2z2y+LyTcO0CYf3Lple8KlgLAXYMsv7pGLsOvhS7BW2jW97/bcbpUNxoHb
eghxqbIEnyRImUbbyg+nW7VVk65RKdPUNkBPXfQ2NMVwe+SDE5Rl+NXNVqDNjGad
soDTUBrD9yXkWX+4s0myleE62UzzH5nYgGPQeQgYmzWgq7LybH6WBlbQK9D7ODJR
Cw3LCq1hwZZ2w04Yx+XwMHquGJYHW8L2pj77h95uhzksz8buKnM0AGwBCTC6RMoi
AyUQvdc=
=JUWl
-----END PGP SIGNATURE-----
Merge tag 'v7.2-rc2' into togreg
Linux 7.2-rc2
Done to resolve conflicts with header reorg around mod_devicetable.h
and provide a base for other inflight series that touch the includes.
Use namespaced exports for IIO consumer API functions.
This will make it easier to manage the IIO export surface. Consumer drivers
will only be provided access to a specific set of functions, thereby
restricting usage of internal IIO functions by other parts of the kernel.
This change cannot be split into several parts without breaking
bisectability, thus all of the affected drivers are modified at once.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The AD3532R/AD3532 is a 16-channel, 16-bit voltage output DAC. It shares
similar functionality with AD3530R but splits its registers into two
banks: bank 0 at 0x10xx for channels 0-7 and bank 1 at 0x30xx for
channels 8-15. The input, LDAC trigger and operating-mode registers are
therefore selected per bank.
Add the AD3532R register map, channel specs, per-bank register arrays, a
dedicated powerdown handler and its own regmap_config, reusing the
table-driven helpers for the shared configuration steps.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Devices with a larger register map need their own regmap_config so
debugfs register access stays within each device's address range.
Move the config into the chip_info table and let probe pass the per-chip
config. All current devices share the same config, so no functional
change.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Devices with a multi-bank register map repeat the same configuration
across several banks, which the hardcoded register addresses in
ad3530r_setup() cannot cover.
Move the addresses into per-chip arrays and add ad3530r_set_reg_bank_bits()
and ad3530r_write_reg_banks() to apply an operation to every bank. Each
current device has a single bank, so no functional change.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The software LDAC trigger register is stored in the chip_info table as a
fixed register address. Devices with a multi-bank register architecture
select the trigger register based on the channel being updated, which a
single static address cannot express.
Convert sw_ldac_trig_reg into a function pointer that returns the
trigger register for a given channel, mirroring the input_ch_reg
callback.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Add basic version of mcf54415 DAC driver. DAC is embedded in the SoC and
DAC configuration registers are mapped in the internal IO address space.
The DAC accepts a 12-bit digital signal and creates a monotonic 12-bit
analog output varying from DAC_VREFL to DAC_VREFH. The DAC module
consists of a conversion unit, an output amplifier, and the associated
digital control blocks. Default register values for DAC_VREFL and DAC_VREFH
are respectively 0 and 0xfff, left untouched in this initial version.
This initial version of the driver is minimalistic, "output raw" only, to
be extended in the future. DMA and external sync are disabled, default mode
is high speed, default format is right-justified 12-bit on 16-bit word.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
If wired LDAC, should be asserted when unused (pin is active-low), which
allows for synchronous DAC updates. This will be used to update all the
channels at the same time when adding buffer support.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add RESET pin GPIO support through an optional reset control, which is
local to the probe function. A reset pulse is manually generated after
the device is powered up.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Get and enable regulators for vdd, vlogic and vref input power pins. Vdd
is the input power supply, while vlogic powers the digital side. vref is
replacing vcc, which is being deprecated, but still supported. The value
of vref_mv is checked so that a device without internal voltage reference
cannot proceed without an explicit supply. For correct operation, vdd and
vlogic are required, then devm_regulator_get_enable() is used so the
driver can still work without them by using the stub/dummy regulators.
Error report uses dev_err_probe(), which helps debugging an init issue.
A small delay is added after the regulators are enabled to consider for
the power-up time (4.5 us).
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
spi_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The drivers explicitly set the .driver_data member of struct
spi_device_id to zero without relying on that value. Drop these unused
assignments.
While touching these arrays unify spacing and use named initializers for
.name.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The driver only supports a single chip variant since it's birth in 2022.
Both the spi id_table and the of id_table are essentially unused (only
assigned to a write-only member in private data).
Hardcode the device name and then drop various unused stuff from the
driver. While touching the spi id_table assign .name using a named
initializer.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Ensure that if a device has Vref1 but reading the regulator returns an
error, mcp47feb02_init_ctrl_regs() is not called with an uninitialized
vref1_uV value. Also add a device_property_present() check for the Vref1
supply before reading the regulator.
Fixes: dd154646d2 ("iio: dac: mcp47feb02: Fix Vref validation [1-999] case")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/all/adiPnla0M5EzvgD-@stanley.mountain/
Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Usual mixed bag of ancient issues and the recently introduced.
Various drivers
- Ensure use of simple_write_to_buffer() in debugfs callbacks doesn't
result in reading off the end of intended data by checking the
position is always 0.
buffer/hw-consumer
- Ensure scan_mask is freed on buffer release.
acpi-als
- Check ACPI_COMPANION() against NULL to close corner case where a
driver is overridden.
adi,ad4062
- Add GPIOLIB dependency to avoid undefined ref to gpiochip_get_data()
adi.ad7768-1
- Add GPIOLIB dependency to avoid several undefined functions.
adi,ad2s1210
- Ensure possible recovery path if a read fails in the interrupt handler.
bosch,bmg160
- Increase sleep on startup to ensure device is ready.
bosch,bmp280
- Ensure buffer pushed to kfifo is zeroed to avoid leaking uninitialized
stack data to userspace.
dyna-image,al3010
- Fix refactor that stopped reading one of the two measurement registers.
dyna-image,al3320a
- Fix refactor that stopped reading one of the two measurement registers.
qcom,spmi-iadc
- Ensure disable_irq_wake() is called on remove path.
sensiron,scd30
- Fix a sign extension bug.
st,vl5310x
- Ensure possible recovery path if a read fails in the interrupt handler.
ti,adc1298
- Bounds check for pga_settings index. Hardening against device returning
unexpected values.
ti,tmp006
- Ensure trigger correctly released on remove path.
vishay,veml6030
- Fix incorrect channel type in events.
vishay,veml6074
- Bounds check for veml6075_it_ms. Hardening against device returning
unexpected values.
-----BEGIN PGP SIGNATURE-----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=A+i2
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-7.1b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
IIO: 2nd set of fixes for the 7.1 cycle.
Usual mixed bag of ancient issues and the recently introduced.
Various drivers
- Ensure use of simple_write_to_buffer() in debugfs callbacks doesn't
result in reading off the end of intended data by checking the
position is always 0.
buffer/hw-consumer
- Ensure scan_mask is freed on buffer release.
acpi-als
- Check ACPI_COMPANION() against NULL to close corner case where a
driver is overridden.
adi,ad4062
- Add GPIOLIB dependency to avoid undefined ref to gpiochip_get_data()
adi.ad7768-1
- Add GPIOLIB dependency to avoid several undefined functions.
adi,ad2s1210
- Ensure possible recovery path if a read fails in the interrupt handler.
bosch,bmg160
- Increase sleep on startup to ensure device is ready.
bosch,bmp280
- Ensure buffer pushed to kfifo is zeroed to avoid leaking uninitialized
stack data to userspace.
dyna-image,al3010
- Fix refactor that stopped reading one of the two measurement registers.
dyna-image,al3320a
- Fix refactor that stopped reading one of the two measurement registers.
qcom,spmi-iadc
- Ensure disable_irq_wake() is called on remove path.
sensiron,scd30
- Fix a sign extension bug.
st,vl5310x
- Ensure possible recovery path if a read fails in the interrupt handler.
ti,adc1298
- Bounds check for pga_settings index. Hardening against device returning
unexpected values.
ti,tmp006
- Ensure trigger correctly released on remove path.
vishay,veml6030
- Fix incorrect channel type in events.
vishay,veml6074
- Bounds check for veml6075_it_ms. Hardening against device returning
unexpected values.
* tag 'iio-fixes-for-7.1b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (23 commits)
iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
iio: adc: ad_sigma_delta: fix CS held asserted and state leaks
iio: light: opt3001: fix missing state reset on timeout
iio: chemical: scd30: Cleanup initializations and fix sign-extension bug
iio: core: fix uninitialized data in debugfs
iio: backend: fix uninitialized data in debugfs
iio: dac: ad3552r-hs: fix uninitialized data ni ad3552r_hs_write_data_source()
iio: adc: qcom-spmi-iadc: balance enable_irq_wake() on driver unbind
iio: light: al3320a: read both ALS ADC registers again
iio: light: al3010: read both ALS ADC registers again
iio: temperature: tmp006: use devm_iio_trigger_register
iio: buffer: hw-consumer: free scan_mask on buffer release
iio: adc: ad7768-1: Select GPIOLIB
iio: light: veml6030: fix channel type when pushing events
iio: light: acpi-als: Check ACPI_COMPANION() against NULL
iio: resolver: ad2s1210: notify trigger and clear state on fault read error
iio: proximity: vl53l0x: notify trigger and clear IRQ on error paths
iio: gyro: bmg160: wait full startup time after mode change at probe
iio: gyro: bmg160: bail out when bandwidth/filter is not in table
iio: pressure: bmp280: zero-init bmp580 trigger handler buffer
...
Create struct with bus operations, which will be used to extend bus
implementation features. Auxiliary functions ad5686_write() and
ad5686_read() are created and ad5686_probe() now receives an ops struct
pointer rather than individual read and write functions.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Review documentation comment header for ad5686_chip_info and ad5686_state.
Update variable names and description and remove unnecessary blank line
between comment and struct declaration.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Create ad5310_control_sync() and ad5683_control_sync() functions that
properly consume the mask definitions with FIELD_PREP(). This allows to
reuse a function that updates the control register with cached values,
without relying on confusing logic that depends on st->use_internal_vref,
which is initialized earlier in ad5686_probe() because it is also
applicable to the AD5686_REGMAP case, removing the need for the
has_external_vref. Powerdown masks initialization is simplified as
*_control_sync() masks outs any unused bits for the single-channel case.
The change cleans up ad5686_write_dac_powerdown() and ad5686_probe(),
organizing the code for feature extension, e.g. gain control support for
single-channel devices.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add ad5686_pd_field_set() and ad5686_pd_field_get() helpers to cleanup
powerdown mask control. Define AD5686_PD_* constants, e.g. AD5686_PD_MSK
to hold powerdown mask value for a single channel. AD5686_LDAC_PWRDN_*
macros are replaced by AD5686_PD_MODE_*, because they are unused and the
LDAC feature for async load of DAC channel values is not related to power
down control.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add of_match table for the SPI device variants to be consistent with the
AD5696 I2C driver.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Split chip info table into separate structs and expose them to the spi
i2c drivers. That is the preferrable approach and allows for the drivers
to have knowledge of the device info before the common probe function gets
called. Those chip info structs may be shared by SPI and I2C driver
variants.
Channel declaration definitions are grouped according to channel count and
DECLARE_AD5693_CHANNELS() macro is renamed to DECLARE_AD5683_CHANNELS() to
match the regmap_type enum.
Use spi_get_device_match_data() and i2c_get_match_data() to get chip info
struct reference, passing it as parameter to the core probe function.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
AD5683_REGMAP and AD5693_REGMAP behave the same way in the common code,
and that is because they target single channel devices from the same
sub-family. There is no reason to separate them and it will make things
simpler when refactoring the chip info table.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Apply IWYU principle, replacing unused/generic headers for
specific/missing headers. The resulting include directive lists are sorted
accordingly.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Siratul Islam <email@sirat.me>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The .driver_data member of the single i2c_device_id array entry is
unused in the driver. Drop it and also the then unused definition.
While at it, convert the i2c_device_id array to a better readable named
initializer.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace &spi->dev with a local dev pointer to shorten lines, fix
alignment, and improve overall readability in the probe function.
Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Rearrange the include headers in alphabetical order to follow the
standard kernel coding style. This is a preparatory cleanup with
no functional changes.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for the Analog Devices AD5706R, a 4-channel 16-bit
current output digital-to-analog converter with SPI interface.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
If the *ppos value is non-zero then the simple_write_to_buffer() function
won't initialized the start of the buf[] buffer. Non-zero values for
*ppos won't work here generally, so just test for them and return -ENOSPC
at the start of the function.
Fixes: b1c5d68ea6 ("iio: dac: ad3552r-hs: add support for internal ramp")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Angelo Dureghello <adureghello@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
