clangd reports many "unused header" warnings throughout the Xe driver.
Start working to clean this up by removing unnecessary includes in our
.c files and/or replacing them with explicit includes of other headers
that were previously being included indirectly.
By far the most common offender here was unnecessary inclusion of
xe_gt.h. That likely originates from the early days of xe.ko when
xe_mmio did not exist and all register accesses, including those
unrelated to GTs, were done with GT functions.
There's still a lot of additional #include cleanup that can be done in
the headers themselves; that will come as a followup series.
v2:
- Squash the 79-patch series down to a single patch. (MattB)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260115032803.4067824-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Add support for triggering and handling MERT TLB invalidation. After
LMTT updates, the MERT TLB invalidation is initiated to ensure memory
translations remain coherent.
Completion of the invalidation is signaled via MERT interrupt (bit 13 in
the GFX master interrupt register). Detect and handle this interrupt to
properly synchronize the invalidation flow.
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251124190237.20503-4-lukasz.laguna@intel.com
Current gu2host handler registered as MSI-X vector 0 and as per bspec for
a msix vector 0 interrupt, the driver must check the legacy registers
190008(TILE_INT_REG), 190060h (GT INTR Identity Reg 0) and other registers
mentioned in "Interrupt Service Routine Pseudocode" otherwise it will block
the next interrupts. To overcome this issue replacing guc2host handler
with legacy xe_irq_handler.
Fixes: da889070be ("drm/xe/irq: Separate MSI and MSI-X flows")
Bspec: 62357
Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20251107083141.2080189-1-venkata.ramana.nayana@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Current implementation of compute walker has dependency on GPU/SW Stack
which requires SW/UMD to wait for event from KMD to indicate
PIPE_CONTROL interrupt was done. This created latency on SW stack.
This feature adds support to generate completion interrupt from GPGPU
walker which does not support MSIx and avoid software using Pipe control
drain/idle latency.
The only thing needed for the kernel driver to do here is to wakeup the
thread waiting on the ufence, which is already handled by the irq
handler. Before waiting on this event, the userspace side can opt-in to
this interrupt being generated by the HW by selecting the flag in the
POST_SYNC_DATA_2 substructure's dw0[3] of COMPUTE_WALKER_2 instruction.
Bspec: 62346, 74334
Suggested-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: S A Muqthyar Ahmed <syed.abdul.muqthyar.ahmed@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-21-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Just like the other engines, check xe_hw_engine_mask_per_class() for VCS
and VECS to account for architectural availability of those registers.
With that, all the possibly available media engines can have their
interrupts enabled.
Bspec: 54030
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-20-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Two bit fields have similar functionality across the interrupt vectors
but are named "RENDER". Rename them to follow the bspec more closely and
clear any confusion when using them for other engines.
Bspec: 62353, 62354, 62355, 62346, 62345, 63341
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-19-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Each engine class has a different bitfield structure in the hw. We've
been just using a common mask for all of them, but this means that we
could inadvertently set a wrong bit in one class while enabling
something in another. Split them to make it more future proof.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-18-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
It's confusing to refer to some masks as the interrupt masks and others
as the fuse masks. Rename the fuse one to make it clearer.
Note that the most important role they play here is that the call
to xe_hw_engine_mask_per_class() will not only limit the engines
according to the fuses, but also by what is available in the specific
architecture - the latter is more important information to know what
interrupts should be enabled. Add a comment about that.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-17-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
If the primary GT is disabled via configfs, we shouldn't try to access
it to lookup BCS/CCS engine masks. For the purposes of IRQ reset (which
masks & disables interrupts in an sgunit register), assume all possible
instances are present.
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-39-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Display interrupt handling has no relation to GT(s) on the platforms
supported by the Xe driver. We only call xe_display_irq_postinstall
with the first tile's primary GT, so the single condition that uses the
GT pointer within the function always evaluates to true. Drop the
unnecessary parameter and the condition.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-27-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
I2C IRQ needs to be routed to SGUnit or PUnit for the devices that support
it. Wire up reset/postinstall handles for I2C IRQ to take care of this.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20251011123509.3233213-3-raag.jadav@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Gfx device reports two classes of errors: uncorrectable and
correctable. Depending on the severity uncorrectable errors are further
classified Non-Fatal and Fatal.
Correctable and Non-Fatal errors: These errors are reported as MSI. Bits in
the Master Interrupt Register indicate the class of the error.
The source of the error is then read from the Device Error Source
Register.
Fatal errors: These are reported as PCIe errors
When a PCIe error is asserted, the OS will perform a SBR (Secondary
Bus reset) which causes the driver to reload. The error registers are
sticky and the values are maintained through SBR.
Add basic support to handle these errors.
Bspec: 50875, 53073, 53074, 53075, 53076
v2: Format commit message (Umesh)
v3: fix documentation (Stuart)
Cc: Stuart Summers <stuart.summers@intel.com>
Co-developed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250826063419.3022216-9-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Instead of checking for not being a media type GT provide a small
helper to explicitly express our intentions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250713103625.1964-5-michal.wajdeczko@intel.com
Instead of looking at the tile->id member provide a small helper
to explicitly express our intentions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250713103625.1964-4-michal.wajdeczko@intel.com
Adding adaption/glue layer where the I2C host adapter
(Synopsys DesignWare I2C adapter) and the I2C clients (the
microcontroller units) are enumerated.
The microcontroller units (MCU) that are attached to the GPU
depend on the OEM. The initially supported MCU will be the
Add-In Management Controller (AMC).
Co-developed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250701122252.2590230-4-heikki.krogerus@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo fixed the co-developed tags and SPDX format in the .c file]
When devm_add_action_or_reset() fails, it already calls the function
passed as parameter and that function is already free'ing the irqs.
Drop the goto and just return.
The caller, xe_device_probe(), should also do the same thing instead of
wrongly doing `goto err` and calling the unrelated xe_display_fini()
function.
Fixes: 14d25d8d68 ("drm/xe: change old msi irq api to a new one")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
When something happen to the session, the HW generates a termination
interrupt. In reply to this, the driver is required to submit an inline
session termination via the VCS, trigger the global termination and
notify the GSC FW that the session is now invalid.
v2: rename ARB define to make it cleaner to move it to uapi (John)
v3: fix parameter name in documentation
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-6-daniele.ceraolospurio@intel.com
Expose functions to request and free MSI-X interrupts.
The request has two flavors:
- Static MSI-X allocation, for known MSI-X interrupts (e.g. GuC-to-host)
- Dynamic MSI-X allocation, which uses the next available MSI-X interrupt
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213072538.6823-4-ilia.levi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A new flow is added for devices that support MSI-X:
- MSI-X vector 0 is used for GuC-to-host interrupt
- MSI-X vector 1 (aka default MSI-X) is used for HW engines
The default MSI-X will be passed to the HW engines in a subsequent
patch.
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213072538.6823-2-ilia.levi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The irq.enabled flag was protected by a spin lock (irq.lock).
By making it atomic we no longer need to wait for the spin lock in
irq handlers. This will become especially useful for MSI-X irq
handlers to prevent lock contention between different interrupts.
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210173506.202150-1-ilia.levi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
IRQ registers have a well-defined scope and make sense to collect in a
dedicated header file. This also reduces confusion about the GT IRQ
registers --- even though those registers relate to the GTs, they
actually live outside the GT (in the sgunit) and thus do not need to
worry about GT-specific register concepts like forcewake, steering, etc.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923214514.2031410-2-matthew.d.roper@intel.com
Up until now only VF used Memory Based Interrupts (memirq).
Moving it out of VF to cater for other usages, specifically MSI-X.
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918053942.1331811-4-illevi@habana.ai
Stop using GT pointers for register access. This misusage has been
especially confusing in interrupt code because even though some of the
interrupts are related to GTs (or engines within GTs), the interrupt
registers themselves live outside the GT, in the sgunit.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-55-matthew.d.roper@intel.com
Avoid using double space, ", " in function or macro parameters
where it's not required by any alignment purpose. Replace it with
a single space, ", ".
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823080643.2461992-1-nitin.r.gote@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Add heci_cscfi support bit for new CSC engine type.
It has same mmio offsets as DG2 GSC but separate interrupt flow.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708084906.2827024-1-alexander.usyskin@intel.com
The cleanup is done by devres in irq_uninstall.
Commit bbc9651fe9 ("drm/xe/irq: move irq_uninstall over to devm")
resolved the ordering issue where irq_uninstall (registered with drmm)
was called after pci_free_irq_vectors (registered with devm upon calling
pci_alloc_irq_vectors). This happened because drmm action list is
registered with devm very early in the init flow - before
pci_alloc_irq_vectors.
Now that irq_uninstall is registered with devm, it will be called before
pci_free_irq_vectors and we can remove xe_irq_shutdown.
Signed-off-by: Ilia Levi <illevi@habana.ai>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606124705.822451-1-illevi@habana.ai
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove continue statement which does not have real effect
as no actions are to be taken post continue.
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318114057.3831274-1-tejas.upadhyay@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Starting on Xe2, the GSCCS engine reset is a 2-step process. When the
driver or the GuC hits the GDRST register, the CS is immediately reset
and a success is reported, but the GSC shim continues its reset in the
background. While the shim reset is ongoing, the CS is able to accept
new context submission, but any commands that require the shim will
be stalled until the reset is completed. This means that we can keep
submitting to the GSCCS as long as we make sure that the preemption
timeout is big enough to cover any delay introduced by the reset; since
the GSC preempt timeout is not tunable at runtime, we only need to check
that the value set in kconfig is big enough (and increase it if it
isn't).
When the shim reset completes, a specific CS interrupt is triggered,
in response to which we need to check the GSCI_TIMER_STATUS register
to see if the reset was successful or not.
Note that the GSCI_TIMER_STATUS register is not power save/restored,
so it gets reset on MC6 entry. However, a reset failure stops MC6,
so in that scenario we're always guaranteed to find the correct value.
Since we can't check the register within interrupt context, the
existing GSC worker has been updated to handle it.
The expected action to take on ER failure is to trigger a driver FLR,
but we still don't support that, so for now we just print an error. A
comment has been added to the code to keep track of the FLR requirement.
v2: Add a check for the initial timeout value (Alan)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304145634.820684-1-daniele.ceraolospurio@intel.com
If platform supports MSIX, driver needs to allocate all possible
interrupts.
v2:
- drop msix_cap and use the api return code instead.
- fix commit message.
v3:
- pass specific type in irq flags.
Cc: Ohad Sharabi <osharabi@habana.ai>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124075058.2302235-1-dliberman@habana.ai
There are very few places that need to include anything from under
display/. Require the display/ prefix in #include directives, and drop
the subdirectory from the header search path.
Sort the include lists while at it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240122101428.2683468-2-jani.nikula@intel.com
The GSC notifies us of a proxy request via the HECI2 interrupt. The
interrupt must be enabled both in the HECI layer and in our usual gt irq
programming; for the latter, the interrupt is enabled via the same enable
register as the GSC CS, but it does have its own mask register. When the
interrupt is received, we also need to de-assert it in both layers.
The handling of the proxy request is deferred to the same worker that we
use for GSC load. New flags have been added to distinguish between the
init case and the proxy interrupt.
v2: rename irq define, fix include ordering (Alan)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117182621.2653049-3-daniele.ceraolospurio@intel.com
There are small differences in handling of the register based
interrupts on the VF driver as some registers are not accessible
to the VF driver. Additionally VFs must support Memory Based
Interrupts. Add VF specific interrupt handler for this.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231214185955.1791-11-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
For devres managed devices, pci_alloc_irq_vectors is also managed (see
pci_setup_msi_context for reference).
PCI device used by Xe is devres managed (it was enabled with
pcim_enable_device), which means that calls to pci_free_irq_vectors are
redundant and can be safely removed.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231129214509.1174116-4-michal.winiarski@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Drop interrupt event from PMU as that is not useful and not being used
by any UMD.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there.
We do this by recompiling i915/display code twice.
Now that i915 has been adapted to support the Xe build, we can add
the xe/display support.
This initial work is a collaboration of many people and unfortunately
this squashed patch won't fully honor the proper credits.
But let's try to add a few from the squashed patches:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The spec for this register, like many other interrupt related ones,
asks software to write back '1' to clear the serviced bits. Let's
respect the spec.
v2:
- Update commit message
- Add missing CC
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
CC: Daniele Spurio Ceraolo <daniele.ceraolospurio@intel.com>
CC: Lucas De Marchi <lucas.demarchi@intel.com>
CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
CC: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Starting with Xe_LP+, GFX_MSTR_IRQ contains status bits that have W1C
behavior. If we do not properly reset them, we would miss delivery of
interrupts if a pending bit is set when enabling IRQs.
As an example, the display part of our probe routine contains paths
where we wait for vblank interrupts. If a display interrupt was already
pending when enabling IRQs, we would time out waiting for the vblank.
That in fact happened recently when modprobing Xe on a Lunar Lake with a
specific configuration; and that's how we found out we were missing this
step in the IRQ enabling logic.
Fix the issue by clearing GFX_MSTR_IRQ as part of the IRQ reset.
v2:
- Make resetting GFX_MSTR_IRQ be the last step to avoid bit
re-latching. (Ville)
v3:
- Swap nesting order: guard loop with the IP version check instead of
doing the check at each iteration. (Lucas)
v4:
- Add braces for the "if" statement guarding the loop to make the
compiler happy. (Gustavo)
BSpec: 50875, 54028, 62357
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230926221914.106843-2-gustavo.sousa@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In future devices we will need to support msix interrupts.
Reviewed-by: Ohad Sharabi <osharabi@habana.ai>
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As a preparation for msix support, changing for new msi irq api
which supports both msi and msix.
Reviewed-by: Ohad Sharabi <osharabi@habana.ai>
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rebase fixes by Rodrigo]
IRQ enabled flag should be set only after request irq succeeds.
Reviewed-by: Ohad Sharabi <osharabi@habana.ai>
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
At the end of the function, we will always return err no matter it's
value. Simplify this by just returning the result of
drmm_add_action_or_reset().
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230915220233.59736-1-gustavo.sousa@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The guc_submission_enabled() function is being used as a boolean toggle
for all firmwares and all related features, not just GuC submission. We
could add additional flags/functions to distinguish and allow different
use-cases (e.g. loading HuC but not using GuC submission), but given
that not using GuC is a debug-only scenario having a global switch for
all FWs is enough. However, we want to make it clear that this switch
turns off everything, so rename it to uc_enabled().
v2: rebase on s/XE_WARN_ON/xe_assert
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are a set of engine group busyness counters provided by HW which are
perfect fit to be exposed via PMU perf events.
BSPEC: 46559, 46560, 46722, 46729, 52071, 71028
events can be listed using:
perf list
xe_0000_03_00.0/any-engine-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/copy-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/interrupts/ [Kernel PMU event]
xe_0000_03_00.0/media-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/render-group-busy-gt0/ [Kernel PMU event]
and can be read using:
perf stat -e "xe_0000_8c_00.0/render-group-busy-gt0/" -I 1000
time counts unit events
1.001139062 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
2.003294678 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
3.005199582 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
4.007076497 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
5.008553068 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
6.010531563 43520 ns xe_0000_8c_00.0/render-group-busy-gt0/
7.012468029 44800 ns xe_0000_8c_00.0/render-group-busy-gt0/
8.013463515 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
9.015300183 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.017233010 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.971934120 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
The pmu base implementation is taken from i915.
v2:
Store last known value when device is awake return that while the GT is
suspended and then update the driver copy when read during awake.
v3:
1. drop init_samples, as storing counters before going to suspend should
be sufficient.
2. ported the "drm/i915/pmu: Make PMU sample array two-dimensional" and
dropped helpers to store and read samples.
3. use xe_device_mem_access_get_if_ongoing to check if device is active
before reading the OA registers.
4. dropped format attr as no longer needed
5. introduce xe_pmu_suspend to call engine_group_busyness_store
6. few other nits.
v4: minor nits.
v5: take forcewake when accessing the OAG registers
v6:
1. drop engine_busyness_sample_type
2. update UAPI documentation
v7:
1. update UAPI documentation
2. drop MEDIA_GT specific change for media busyness counter.
Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Co-developed-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
