This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
GPU average and input power backends report a mix of whole watts,
milliwatts, Q24.8 watts and decimal-packed fractions. Q24.8 is inherited
from the legacy PowerPlay sensor format. Milliwatts are a more natural unit
for the hwmon and pm_info consumers in amdgpu_pm.c. A common decoder cannot
distinguish these formats, and converting native milliwatts through Q24.8
also loses precision.
Use milliwatts as the internal unit across all PPT and PowerPlay backends.
Decode Q24.8 only at the legacy smu7 input boundary and encode it only for
the raw amdgpu_sensors debugfs interface. This gives hwmon, pm_info and the
sensor ioctl one unambiguous unit while preserving the format used by UMR.
Fixes: 5b79d0482f ("drm/amd/pp: Remove struct pp_gpu_power")
Fixes: 01992b121f ("drm/amd/pm: fix amdgpu_pm_info power display units")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reported-by: Lars Nieradzik <l.nieradzik@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the lines greppable by removing an extra EOL and report the
status only once - after the reply is detected.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There were two mistakes in the previous implementation:
The check for AutomaticDCTransition should be inverted.
We recently learned that the kernel should send
PPSMC_MSG_RunningOnAC when the flag is set, and not the
other way around.
The clocks also need to be recomputed, because the code in
the smu7_apply_state_adjust_rules() function selects
different limits on AC and DC.
Fixes: 96da0d8661 ("drm/amd/pm/smu7: Notify SMU7 of DC->AC switch")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 055a40c32f ("drm/amd/pm: Use uploaded size for legacy custom
PPTable") changed pp_dpm_set_pp_table() to kmemdup the uploaded buffer
directly and set soft_pp_table_size to the uploaded size. As a result
soft_pp_table now points to an allocation completely outside adev->bios,
making the pp_end > bios_end check in pp_entries_max() likely true for
custom PP tables — returning 0 and breaking PP table overrides via sysfs.
Fixes: c42871ba48 ("drm/amdgpu/pm: add pp_entries_max() helper")
Reported-by: John Olender <john.olender@gmail.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Tested-by: John Olender <john.olender@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The old radeon driver has a documented workaround in ci_dpm.c
which claims that Bonaire 0x6658 with old memory controller
firmware is unstable with MCLK DPM, so as a precaution I
disabled MCLK DPM on this ASIC in amdgpu.
Note that the old MC firmware is not actually used with
amdgpu, but in theory it's possible that the VBIOS sets
up the ASIC with an old MC firmware that is already running
when amdgpu initializes (in which case amdgpu doesn't
load its own firmware).
What I expected to happen is that the GPU would simply use
its maximum memory clock, and indeed this is what seemed
to happen according to amdgpu_pm_info which reads the
current MCLK value from the SMU.
However, some users reported a huge perf regression
and upon a closer look it seems that the GPU seems to
not actually use the highest MCLK value, despite the SMU
reporting that it does.
Let's not disable MCLK DPM on Bonaire 0x6658 (R7 260X).
Keep MCLK DPM disabled on R9 M380 in the 2015 iMac
because that still hangs if we enable it.
Fixes: 9851f29cb0 ("drm/amd/pm/ci: Disable MCLK DPM on problematic CI ASICs")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reject AC timing blocks with a stride smaller than a dword before walking
VBIOS data. A zero stride can otherwise keep reg_data pinned on a
nonmatching MEM_ID forever.
Also bound the data-block and END marker reads by the returned VRAM_Info
table size so malformed index/data sizes do not push the timing walk past
the table.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function header above get_tonga_state_array() still refers to
check_powerplay_tables() and does not describe all of the function
parameters.
Update it to match the current function prototype and include the
missing parameter description.
Fixes: 1ac24df78c ("drm/amd/pm: Validate Tonga PowerPlay state array bounds")
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Yang Wang <lkevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vddInd, vddciInd and mvddInd from VBIOS-parsed tables index into vddc,
vddci and vddmem lookup tables without bounds checks across nine sites.
Return -EINVAL when any index is out of range.
Fixes: f83a999164 ("drm/amd/powerplay: add Vega10 powerplay support (v5)")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vddInd and vddcInd fields from VBIOS-parsed tables are used to index into
voltage lookup tables without a bounds check. Return -EINVAL when any
index is out of range.
Fixes: c82baa2818 ("drm/amd/powerplay: add Tonga dpm support (v3)")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
Tonga PPTable parsing also relies on VBIOS offsets, revision fields
and entry counts for several subtables. Malformed data can cause
out-of-bounds reads, while voltage lookup tables can overrun their
fixed-size destination arrays.
Add common bounds helpers and validate fixed subtables, dynamic entry
arrays and revision-specific layouts before consuming voltage lookup,
dependency, PCIE, power-tune, hard-limit, thermal, fan, GPIO, PPM and
VCE state data.
v2:
correct to handle get_tonga_ppm_table() return value.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
Vega10 PPTable parsing uses VBIOS-provided offsets, revision fields
and entry counts to locate subtables. Malformed data can otherwise
drive out-of-bounds reads from soft_pp_table_size, and voltage lookup
tables can overrun their fixed-size destination arrays.
Add shared bounds helpers and validate fixed-size subtables, dynamic
entry arrays and revision-specific layouts before consuming thermal,
fan, power-tune, clock dependency, PCIE, hard-limit and voltage lookup
data.
v2:
if ucRevId is not matched, fallback to default table size instead of returning -EINVAL.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
processpptables.c walks several variable-length PPLIB tables by
using offsets from the VBIOS PowerPlay table. Some paths dereference
extended headers, state arrays, clock arrays, non-clock arrays, or VCE
records before checking that the referenced data is inside the table
buffer.
Add local bounds helpers and validate the relevant offsets and entry
sizes before dereferencing them. This prevents truncated or malformed
legacy PowerPlay tables from driving out-of-bounds reads during hwmgr
initialization and table entry lookup.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Vega hwmgr PowerPlay table parsers read fixed table fields,
state array entries, or SMC PPT fields before validating that the
VBIOS table buffer covers those structures. A truncated table can
therefore lead to out-of-bounds reads during hwmgr initialization.
Reject tables smaller than the fixed PowerPlay table. For Vega10, also
validate the state array offset and entry range before dereferencing
the state array.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
process_pptables_v1_0.c builds the Tonga state array pointer
from usStateArrayOffset before checking that the table buffer covers
the referenced data. A truncated PowerPlay table can therefore lead to
out-of-bounds reads while validating the state array.
Validate the fixed table size first, then check the state array offset
and entry range before dereferencing the state array.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same write-OOB and read-OOB as the Tonga fix, across seven Vega10 sub-table
parsers: get_vddc_lookup_table(), get_mm_clock_voltage_table(),
get_socclk/mclk/gfxclk/pixclk/dcefclk_voltage_dependency_table().
The GFXCLK table selects the correct record size per revision.
Fixes: f83a999164 ("drm/amd/powerplay: add Vega10 powerplay support (v5)")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ucNumEntries in the Tonga/Polaris PowerPlay sub-tables is used as both the
kzalloc count and loop bound without validation, allowing a crafted VBIOS
to overflow the destination heap object and read past the VBIOS image.
Clamp via pp_entries_max() in get_vddc_lookup_table(),
get_mclk_voltage_dependency_table(), get_sclk_voltage_dependency_table()
and get_mm_clock_voltage_table().
Fixes: c82baa2818 ("drm/amd/powerplay: add Tonga dpm support (v3)")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a static inline that returns the maximum safe record count for a
PowerPlay sub-table, bounded by the lesser of soft_pp_table_size and
adev->bios_size. Uses adev->bios directly to avoid a dependency on
struct atom_context. Subsequent patches use it to clamp ucNumEntries.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reject voltage objects whose usSize is smaller than the header or would
advance the cursor past the table end, preventing an infinite loop or
heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table.
Fixes: c82baa2818 ("drm/amd/powerplay: add Tonga dpm support (v3)")
Fixes: 0d2c7569e1 ("drm/amdgpu: add new atomfirmware based helpers for powerplay")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The legacy powerplay path used to allocate hardcode_pp_table from
the original VBIOS PPTable size, copy only the uploaded bytes into it,
and keep soft_pp_table_size unchanged. If a custom PPTable is shorter
than the original table, later code can still treat the stale tail as
valid table data.
Treat the uploaded buffer as the complete custom PPTable: duplicate the
uploaded buffer directly, replace hardcode_pp_table atomically, and set
soft_pp_table_size to the uploaded size.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check for out of range profile modes and custom params that exceed 8 bits.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vega10_odn_edit_dpm_table() and smu7_odn_edit_dpm_table() could mutate
the live ODN table for valid triples, then return 0 after detecting a
truncated buffer or out-of-range index. Validate all (index, clock,
voltage) triples first and return -EINVAL on any failure; only then
apply updates.
v2: Use distinct message for different error case, removed unused
input_level from validation loop (Lijo)
v3: Reject negative level indices, input[] is long but was compared only
against unsigned table bounds, so negative values could pass and truncate
when assigned to uint32_t input_level.
Set DPMTABLE_OD_UPDATE_SCLK/MCLK only after validation passes,
so a failed sysfs write does not leave need_update_dpm_table set for a
later commit.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use kcalloc() so multiplication overflow is detected
and allocation fails safely for phm table copy helpers.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The powerplay path allocates hardcode_pp_table once with kmemdup(...,
soft_pp_table_size). memcpy(..., size) used the sysfs store count (up to
PAGE_SIZE) with no upper bound, causing heap overflow. Reject
writes where size exceeds soft_pp_table_size.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ATOM_PP_PLATFORM_CAP_HARDWAREDC is set,
the SMU has a GPIO pin for detecting AC/DC switch
and everything works automatically.
Otherwise when there is no GPIO pin, the SMU can
automatically detect switching to DC, but needs
to be notified of switching to AC.
Use PPSMC_MSG_RunningOnAC to notify the SMC
when switching to AC.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was not used by anything anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This function was effectively a no-op because it always
returned the maximum possible power level, because the
maximum voltage is in millivolts while the dependency
table didn't contain actual voltages.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These implementations did not actually return
the DAL power level, so they were effectively
a no-op.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was not called from anywhere.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align the hawaii mclk workaround with radeon and windows.
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/1816
Fixes: 9f4b35411c ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ci_populate_all_memory_levels() workaround only
applies to revision 0 SKUs.
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/1816
Fixes: 9f4b35411c ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu7_hwmgr_backend_init() is responsible for initializing the SMU7 power
management backend. It allocates and sets up the backend structure,
initializes voltage tables, configures dependency tables, and prepares
platform-specific power and clock parameters.
The function follows a typical pattern where each initialization step
returns a status in "result", and failures are handled via a common
"goto fail" path that performs cleanup.
Commit 2c21648bb814 ("drm/amd/pm/smu7: Remove non-functional SMU7
voltage dependency on DAL") removed a function call in this
initialization sequence, but left behind the corresponding error check.
As a result, "result" is checked twice without being updated in between:
result = smu7_init_voltage_dependency_on_display_clock_table(hwmgr);
if (result)
goto fail;
...
if (result)
goto fail;
The second check is redundant and unreachable for any new failure, since
no operation modifies "result" between the two checks. This triggers a
Smatch warning about a duplicate zero check and reduces code clarity.
Remove the stale error check to keep the control flow correct and
readable.
Fixes: 9f49e3d4cb ("drm/amd/pm/smu7: Remove non-functional SMU7 voltage dependency on DAL")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On a specific Radeon R9 390X board, the GPU can "randomly" hang
while gaming. Initially I thought this was a RADV bug and tried
to work around this in Mesa:
commit 8ea08747b86b ("radv: Mitigate GPU hang on Hawaii in Dota 2 and RotTR")
However, I got some feedback from other users who are reporting
that the above mitigation causes a significant performance
regression for them, and they didn't experience the hang on their
GPU in the first place.
After some further investigation, it turns out that the problem
is that the highest SCLK DPM level on this board isn't stable.
Lowering SCLK to 1040 MHz (from 1070 MHz) works around the issue,
and has a negligible impact on performance compared to the Mesa
patch. (Note that increasing the voltage can also work around it,
but we felt that lowering the SCLK is the safer option.)
To solve the above issue, add an "sclk_cap" field to smu7_hwmgr
and set this field for the affected board. The capped SCLK value
correctly appears on the sysfs interface and shows up in GUI
tools such as LACT.
Fixes: 9f4b35411c ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In ci_populate_dw8() we currently just read a value from the SMU
and then throw it away. Instead of throwing away the value,
we should use it to fill other fields in DW8 (like radeon).
Otherwise the value of the other fiels is just cleared when
we copy this data to the SMU later.
Fixes: 9f4b35411c ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Follow what radeon did and what amdgpu does for other GPUs with SMU7.
Fixes: 9f4b35411c ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no AMD GPU with the ID 0x66B0, this looks like a typo.
It should be 0x67B0 which is actually part of the PCI ID list,
and should use the Hawaii XT powertune defaults according to
the old radeon driver.
Fixes: 9f4b35411c ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks like this was written for an old version of DC (DAL)
and was never adapted afterwards. This was non-functional
because it relied on the "dal_power_level" field which was
never assigned anywhere in the code base.
Also, it was not implemented for CI ASICs.
Now superseded by the newer voltage dependency on display
clock table added by the previous commit, let's remove.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DCE (display controller engine) requires a minimum voltage
in order to function correctly, depending on which clock level
it currently uses.
Add a new table that contains display clock frequency levels
and the corresponding required voltages. The clock frequency
levels are taken from DC (and the old radeon driver's voltage
dependency table for CI in cases where its values were lower).
The voltage levels are taken from the following function:
phm_initializa_dynamic_state_adjustment_rule_settings().
Furthermore, in case of CI, call smu7_patch_vddc() on the new
table to account for leakage voltage (like in radeon).
Use the display clock value from amd_pp_display_configuration
to look up the voltage level needed by the DCE. Send the
voltage to the SMU via the PPSMC_MSG_VddC_Request command.
The previous implementation of this feature was non-functional
because it relied on a "dal_power_level" field which was never
assigned; and it was not at all implemented for CI ASICs.
I verified this on a Radeon R9 M380 which previously booted to
a black screen with DC enabled (default since Linux 6.19), but
now works correctly.
Fixes: 599a7e9fe1 ("drm/amd/powerplay: implement smu7 hwmgr to manager asics with smu ip version 7.")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two known cases where MCLK DPM can causes issues:
Radeon R9 M380 found in iMac computers from 2015.
The SMU in this GPU just hangs as soon as we send it the
PPSMC_MSG_MCLKDPM_Enable command, even when MCLK switching is
disabled, and even when we only populate one MCLK DPM level.
Apply workaround to all devices with the same subsystem ID.
Radeon R7 260X due to old memory controller microcode.
We only flash the MC ucode when it isn't set up by the VBIOS,
therefore there is no way to make sure that it has the correct
ucode version.
I verified that this patch fixes the SMU hang on the R9 M380
which would previously fail to boot. This also fixes the UVD
initialization error on that GPU which happened because the
SMU couldn't ungate the UVD after it hung.
Fixes: 86457c3b21 ("drm/amd/powerplay: Add support for CI asics to hwmgr")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When MCLK DPM is disabled for any reason, populate the MCLK
table with the highest MCLK DPM level, so that the ASIC can
use the highest possible memory clock to get good performance
even when MCLK DPM is disabled.
Fixes: 9f4b35411c ("drm/amd/powerplay: add CI asics support to smumgr (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The drm_*() macros include the device which is helpful for debugging
issues in multi-GPU systems.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
