Commit 56d8ce9d8c ("drm/amd/display: Apply correct panel mode when
reinitializing hardware") made ASSR failure fall back to the default panel
mode unless eDP mode had previously been applied.
However, dc_link is zero-initialized and DP_PANEL_MODE_DEFAULT is zero.
Before the first call to dp_set_panel_mode(), panel_mode therefore looks
like a previously applied default mode. If ASSR setup fails during the
first link training attempt, the driver incorrectly trains the eDP link
using the default scrambling mode.
On a Google Vilboz Chromebook running self-built coreboot firmware and
PSP verstage, this leaves the panel mostly black with corrupted output
along the top edge.
Track whether panel_mode has actually been initialized, and only consult
the saved mode after it has been applied. This retains the recovery
behavior while preserving eDP mode during initial link training.
Fixes: 56d8ce9d8c ("drm/amd/display: Apply correct panel mode when reinitializing hardware")
Assisted-by: Pi:gpt-5.6-sol
Reviewed-by: George Zhang <george.zhang@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ccb6c2702033f1002b45807fb3cc938760f26f78)
Cc: stable@vger.kernel.org # 6.4.x
get_estimated_bw() divides by link->dpia_bw_alloc_config.bw_granularity,
which is zeroed by reset_bw_alloc_struct() and only populated once
DP_TUNNELING_BW_ALLOC_CAP_CHANGED has been handled.
link_dp_dpia_handle_bw_alloc_status(), the DPCD interrupt handler,
calls get_estimated_bw() whenever DP_TUNNELING_ESTIMATED_BW_CHANGED
is set, independently of whether DP_TUNNELING_BW_ALLOC_CAP_CHANGED
has ever fired for that link. A connected USB4/DPIA tunneling device
that reports an estimated-bandwidth change before ever reporting a
capability change drives a division by zero in this IRQ path.
link_dpia_send_bw_alloc_request() already guards the same
bw_granularity division; add the identical guard here rather than
introducing a new pattern.
Fixes: 8e5cfe547b ("drm/amd/display: upstream link_dp_dpia_bw.c")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Assisted-by: gkh_clanker_t1000
Signed-off-by: Hari Mishal <harimishal1@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f2a961457c33dc34223aad5c9e8971de34a4eed3)
Cc: stable@vger.kernel.org
[why]
ensure dtbclk is enabled before hdmistreamclk_en
pmfw could stop dtbclk on idle.
driver needs to ensure dtbclk enabled is enabled before hdmistreamclk_en
also disable debounce timer on dcn42.
Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add hooks in various entry points to perform hw/sw init for DCN6 asic
- Add dependent changes needed to enable DCN6 asic
- Update the Makefiles so that DCN6 related newly added sources are compiled
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- force FRL rate debug bit was not correctly forcing requested FRL rate
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
The final DP LT failure meant to be logged as DC warning is skipped due
to a break statement above. Move logging up to make sure we don't miss
LT fail events.
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
link_dp_irq_handler.c includes "link_dp_panel_replay.h" twice. Drop the
redundant second include; this is a non-functional cleanup flagged by
scripts/checkincludes.pl.
Fixes: 1e5cd4adfc ("drm/amd/display: move panel replay out from edp")
Signed-off-by: Anas Khan <anxkhn28@gmail.com>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
TCONs supporting VESA AUX Backlight does not always
support VESA Smooth Brightness. Driver software
needs to implement smooth brightness by periodically
updating the brightness by small steps. Driver
implementation is completed and verified on LCD
panels but solution is missing for OLED panels.
[How]
Updated driver to include smooth brightness for
OLED panels using VESA Aux Backlight.
Revert original workaround for VABC on oled issue,
as it is no longer needed.
Add VABC backlight Initialization sequence from
driver side.
Add fix to remove conflict between FW and driver
backlight programming for future ASIC.
Enable VABC for all future asic revisions.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional changes. Just clean up a conceptual mismatch.
Based on feedback on the NUTMEG code in DC, the
preferred_link_setting is meant to force the DP link to a
specific setting, meaning both the link rate and lane count
should be locked to an exact value. What NUTMEG needs is
a lower bound on the link rate, which is not the same concept.
Implement this as a HW workaround flag instead.
Suggested-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When there is a preferred link rate setting, it needs to be
applied to both the current and initial link rate.
This was regressed by a "coding style" fix, which caused
the current link rate to not respect the preferred value.
This commit restores the functionality of NUTMEG,
the DP bridge encoder found on old APUs such as Kaveri.
Fixes: a62346043a ("drm/amd/display: Fix coding style issue")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5465
Cc: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The compound condition checking dp_connector_no_native_i2c
and no_ddc_pin was duplicated across many files, obscuring
intent at every call site.
[How]
Add bool force_i2c_over_aux to struct dc_link, initialized
once during link creation. Add link_get_ddc_aux_inst()
helper to select the correct aux instance. Wire into
link_service via construct_link_service_ddc(). Replace all
duplicated condition checks and aux instance selection
blocks with the new field and helper. No functional change.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- Added link bw to switch case
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable PSR and Panel Replay on a DCN4 variant for display power
savings. On links without native I2C (no DDC pin), the AUX channel
must use aux_hw_inst to avoid NULL pointer access during PSR and
Replay setup.
[How]
Enable PSR and Replay in the DCN4 variant panel config defaults.
Add no_ddc_pin check in dp_setup_panel_replay(),
edp_setup_freesync_replay(), and fsft_send_msg_to_fw() to use
link->aux_hw_inst when dp_connector_no_native_i2c and no_ddc_pin
are set.
Reviewed-by: Matthew Stewart <matthew.stewart2@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The PSRSU-RC capability should be populated in DC during edp detection.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add all the bits to enable DSC over FRL.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Start bringing in the protocol layer for FRL in DC link.
This includes FRL training, timing validation, and other
protocol bits.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ASICs which do not have native DDC capability must use a different
codepath to access the AUX channel.
[How]
- BIOS cap NO_DDC_PIN is set to 1 for links which do not have the DDC pin.
- dp_connector_no_native_i2c in dc_config must also be set to true to
use this codepath.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add a new debug option "enable_replay_esd_recovery" to control whether
to enable the replay ESD recovery feature.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Wei-Guang Li <wei-guang.li@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How]
Add Auxless-ALPM data in VESA PR initialization
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some eDP panels return sinkstatus as 0x5, causing the original sinkstatus == 1
check to never match and resulting in unnecessary polling delay. The
equality check is too restrictive and doesn't properly validate the
specific status bit that indicates receiver readiness.
[How]
Replace direct value comparison with proper bitmask check using
DP_RECEIVE_PORT_0_STATUS constant.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Sung-huai Wang <Danny.Wang@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The logic for choosing between the dce_aux_transfer function variants is
moved into dce_aux.c rather than link_ddc.c.
The "dce_aux_transfer_with_retries" function now uses
dce_aux_transfer_raw in its implementation as the logic is equivalent.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fix various warnings related to unsigned/signed mismatches
- Consistently use the same signedness for a given value
- Explcitly cast between types when needed
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Address signed/unsigned comparison warnings across dc paths to keep
builds warning-clean and improve type safety at comparison boundaries.
Most warnings came from signed loop/index temporaries compared against
unsigned counters and table sizes, plus a smaller number of mixed
signed/unsigned clock, bandwidth, and geometry comparisons.
[How]
Aligned iterator and temporary variable types with the semantic type
of the compared bounds. Used unsigned indices for loops bounded by unsigned
counters and table sizes, while retaining signed types where values are
semantically signed or participate in arithmetic that may legitimately go
negative. Where mixed signed/unsigned comparisons are intentional, applied
explicit boundary casts or guarded comparisons instead of broad type
changes.
No functional behavior changes are intended; this is a warning-resolution
and type-alignment cleanup.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] drm/amd/display had implicit integer narrowing at protocol/storage boundaries
and an incomplete eDP assignment in integrated info parsing.
[How] Apply explicit boundary casts for intentional narrowing, keep intermediate math
in wider types, and restore explicit eDP field mapping in v2.2 parser.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
To avoid unnecessary link retraining when the panel is in Replay/PSR mode,
we need to check if it's in active state and ESD information before we
decide to retrain the link.
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Allen Li <allen.li@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There will be an unexpected desync error while doing PSR -> Replay transit,
so we want to disable the replay desync error detection by default.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Allen Li <allen.li@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Function logic should put after variable declare section, so let's move it.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Resolve compiler warnings by marking unused parameters explicitly.
[How]
In .c and .h function definitions, keep parameter names
in signatures and add a line with `(void)param;` in function body
Preserved function signatures and avoids breaking code paths that
may reference the parameter under conditional compilation.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DCN 4.2 clock manager.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Silence warning by cleaning up unused code.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW]
Add Replay recovery flow so that when HPD occurs and ESD is detected,
Replay can restore the system back to normal.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Weiguang Li <wei-guang.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
If the enable state is already as expect then just return.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Initialize the replay_state variable to PR_STATE_INVALID instead of
PR_STATE_0 before retrieving the actual replay state.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DPIA number field is 6 bits in the spec.
In dp_type, it only defines 5 bits.
The driver ID is only 4 bits in the spec.
[How]
Set DPIA number field size to 6.
And only update 4 bits for driver id.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Deal with some minor idiosyncracies of TRAVIS and NUTMEG chips.
- Always use DP signal type with these chips so that the
normal DP code paths can work with them without a major
refactor of the code base. Properly set this.
- NUTMEG seems to only work with HBR, not RBR, so set a
preferred link rate for this chip.
See amdgpu_atombios_dp_get_dp_link_config() for reference.
- NUTMEG is recognized as a DP branch device but reports 0 sinks,
which is wrong and confuses DC (it hits an early return).
Fix that by hardcoding the sink count to 1.
- Fixup old DC code selecting a special panel mode necessary
for NUTMEG and TRAVIS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DisplayPort code already has the concept of preferred link
settings, but it only allows setting a preferred lane count and
link width at the same time. It does not consider the possiblity
that some devices may not work on lower link rates but may
support various lane counts.
Allow specifying a preferred link rate which will be used as
the initial link rate when deciding the DP link settings.
This is necessary to support NUTMEG which only works with HBR
but not with RBR.
For reference, see the legacy non-DC amdgpu display code:
amdgpu_atombios_dp_get_dp_link_config()
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
[Why]
Avoid unnecessary GPIO configuration attempts on dcn that doesn't
support it.
[How]
Conditionally use GPIO HPD detection or rely on hw encoder path.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
use enum value for Panel Replay setting.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Frame skip capability is described in AMD VSDB in EDID.
Need to retrieve the cap and determine fr.skipping mode enablement
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To correctly control external panel replay fsm.
[HOW]
1. External panel replay is 1-A option only now.
2. Update cursor update and dirty rects commands for external
panel replay support.
3. Add external panel replay support flag in dc.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To find proper panel replay panel inst for external monitors.
[HOW]
Use otg index as panel replay panel inst.
Both Replay features use the same logic to get panel inst.
Correct the bug that would overwrite panel inst in cmd
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prepare for supporting panel replay on external monitors.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 08f133e932.
Commit causing backlight darker when the system wakes up
from standby mode, and green screen w/ secondary screen only
when the system wakes up from standby mode.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add error handling for IRQ_HPD in Panel Replay
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add flow to read selective update related info from DPCD,
and pass the info to DMUB.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Panel Replay is not an eDP-specific function.
[HOW]
Create new Panel Replay source files and move the Panel Replay
functions from the eDP files to the new files. Additionally, create
a new link_service construct function to assign the related
function pointers.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
