Combine two related color manager improvements:
1. Migrate MCM/RMCM, shaper and 3DLUT HW programming to dc_plane_cm
- Continue convergence with upstream Color Manager refactor
- Migrate MCM/RMCM, shaper and 3DLUT programming for dcn401+ to dc_plane_cm
- Unify MCM programming across both legacy and 3DLUT DMA paths
- Add 3DLUT DMA broadcast support for multi-pipe planes
2. Reprogram MCM blend LUT on blend_enable falling edge
- Fix issue where SDR desktop remained desaturated after video playback
- Detect blend_enable falling edge (1->0) in surface update detection
- Force MCM LUT reprogramming on blend state change
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add hooks in various entry points to perform hw/sw init for DCN6 asic
- Add dependent changes needed to enable DCN6 asic
- Update the Makefiles so that DCN6 related newly added sources are compiled
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DCN6 code to DC, DML2, and DMUB
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The final check of hubp for NULL covers all remaining lines of code, since
the value of hubp does not change until the end of the method.
This check is redundant because hubp1 is already dereferenced within the
macro.
If it were NULL, the program would have already failed to proceed.
Remove the left part of the expression with the logical "&&".
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: be1fb44389 ("drm/amd/display: Check null pointers before used").
Signed-off-by: Gleb Markov <markov.gi@npc-ksb.ru>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dchubp needs to program DST_Y_DELTA_DRQ_LIMIT based on dml2.x
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DST_Y_DELTA_DRQ_LIMIT from dml2.1
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Begin convergence with upstream Color Manager refactor
(fda768acb2a1 "drm/amd/display: Sync dcn42 with DC 3.2.373") by
consolidating fragmented per-plane CM state (shaper, 3DLUT, blend,
CM2) into a single dc_plane_cm structure shared by dc_plane_state
and dc_surface_update. Legacy fields are gated behind TRIM_CM2 so
that it keeps compatibility with other repositories.
[How]
Refactored to use newer structures.
No functional behavior change intended. Under !TRIM_CM2 the legacy
fields are still populated for compatibility with other repositories.
v2: squash in conflicting types fix
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
There is an issue that is seemingly limited to DCN42 where systems with
IOMMU enabled will hang during reboot stress testing. The hang happens shortly
after DCN PG exit happens and HUBP is programmed for the first flip, but before
the first surface address is latched. Testing has shown that disabling
DCCG_GLOBAL_FGCG_REP_DIS, HUBP_FGCG_REP_DIS, and DCFCLK_GATE_DIS can mask this
issue.
Disable FGCG for these three repeater bits to avoid issue while debug is on-going.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add DCN42B code to DC
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fix various warnings related to unsigned/signed mismatches
- Consistently use the same signedness for a given value
- Explcitly cast between types when needed
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Address signed/unsigned comparison warnings across dc paths to keep
builds warning-clean and improve type safety at comparison boundaries.
Most warnings came from signed loop/index temporaries compared against
unsigned counters and table sizes, plus a smaller number of mixed
signed/unsigned clock, bandwidth, and geometry comparisons.
[How]
Aligned iterator and temporary variable types with the semantic type
of the compared bounds. Used unsigned indices for loops bounded by unsigned
counters and table sizes, while retaining signed types where values are
semantically signed or participate in arithmetic that may legitimately go
negative. Where mixed signed/unsigned comparisons are intentional, applied
explicit boundary casts or guarded comparisons instead of broad type
changes.
No functional behavior changes are intended; this is a warning-resolution
and type-alignment cleanup.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
The original refactor and fixes are causing regressions.
Revert them for now until they can be resolved
Fixes: e56e3cff2a ("drm/amd/display: Sync dcn42 with DC 3.2.373")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Resolve compiler warnings by marking unused parameters explicitly.
[How]
In .c and .h function definitions, keep parameter names
in signatures and add a line with `(void)param;` in function body
Preserved function signatures and avoids breaking code paths that
may reference the parameter under conditional compilation.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN401 didn't have a MRQ present so these fields didn't exist.
They are still present on DCN42 so we need to continue programming
them like we did on DCN35 or we can block have poor meta requesting
efficiency which blocks p-state.
[How]
Add `hubp42_program_requestor` which takes DML21 input and programs
the registers like DCN35 and prior.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
Workaround for duplicate cursor. Cursor offsetting via x_hotspot attempts
to write a 32 bit unsigned integer to the 8 bit field CURSOR_HOT_SPOT_X.
This wraps cursor position back into focus if x_hotspot exceeds 8 bits,
making duplicate cursors visible
how:
Clamp x_hotspot before writing to hardware
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Benjamin Nwankwo <Benjamin.Nwankwo@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch provides a bulk merge to align driver
support for DCN42 with Display Core version 3.2.373.
It includes upgrade for:
- clk_mgr
- dml2/dml21
- optc
- hubp
- mpc
- optc
- hwseq
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DCN 4.2 in Display Core
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The hubp401_cursor_set_position function programs a different value
than it stores for use with cursor offload.
This can cause a desync when switching between cursor programming paths.
[How]
We do the translation to destination space currently twice: once in the
HWSS layer, and then again in the HUBP layer since we never store the
translated result.
HUBP expects to program the pos->x and pos->y directly for other ASIC,
so follow that pattern here as well.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- Cursor lines per chunk must be assigned from hubp->att and not
hubp->pos (the one in hubp->pos is unassigned)
- In DCN401 DPP, cur0_enable in attribute struct must be assigned
as this is the field passed to DMU
- DCN401 should not program position in driver if offload is enabled
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Debugging underflow issues frequently requires knowing the
HW state at the time of underflow. To enable capturing this
HW state information, interface functions are needed for the
various DC HW blocks.
[How]
This change adds the interface functions to read HW state for
the following DC HW blocks:
- HUBBUB
- HUBP
- DPP
- MPC
- OPP
- DSC
- OPTC
- DCCG
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Karen Chen <Karen.Chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dml2 folder contains all logic for all versions of DML2
This is currently DML2.0 and DML2.1.
Rename dml2 to dml2_0 folder to reflect this better (dml2_0
for DML2.0).
[How]
Rename dml2 to dml2_0 folder and update dml2 references to
use dml2_0 folder.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: waynelin <Wayne.Lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
The DCN401 cursor offload path needs to take into account
use_mall_for_cursor, and also need to ensure the dcn32
function assigns the cursor cache fields (DCN401 uses the
dcn32 implementation).
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We require an interlock between driver and firmware for upcoming
features and given that this could possibly happen on any single
cursor programming call (and that we can't asynchronously wait for
firmware to respond because of it) we'd be regressing cursor performance
by at least an extra 40us per call.
When we could possibly have cursor update every 20us - 100s from high
frequency gaming mice this means that we'd be stuttering or dropping
updates and impacting overall cursor performance.
We want a solution that can:
1. Interlock between other firmware features
2. Not stall out or require the DMCUB lock for every single update
[How]
When cursor offloading is enabled and supported by an ASIC driver will
route the cursor programming through to DMU as part of the regular
DC stream cursor programming interfaces for attributes and position.
The atomic pipe programming version will not be updated: this will still
follow the existing programming path by keeping track of a field that
specifies when the register writes should be deferred to DMU.
Cursor locking is not required when cursor offload is in progress since
the updates are consolidated and processed by DMU once at the end
of the frame in a periodic manner.
The shared buffer the firmware queries from is allocated along with the
rest of the scratch state region in an area that's accessible by
both firmware and driver.
The size of the cursor offload (v1) state will not change, but it does
have a unique union per ASIC version with room for expansion if needed.
When firmware features notifying DMU of DRR updates are not enabled we
now send an explicit vtotal min/max update via driver to DMU firmware
whenever the vtotal max changes. This is to allow the cursor programming
to determine the appropriate latch update point offset from vupdate.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Will help us better debug underflow issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Muhammad Ahmed <Muhammad.Ahmed@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
HUBP needs to know the size of the lut's destination in MPC.
This is currently defaulted to 17, and needs to be set for specific
lut size.
[how]
Define and apply the missing hubp field. Taking this opportunity
to consolidate the programming of 3dlut into a hubp and mpc function.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fix the typo for hubp_clear_tiling, currently calls hubp2_clear_tiling
for dcn401 instead of intended hubp401_clear_tiling.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the static qualifier to make it available for code sharing
with other components.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro <dmytro.laktyushkin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The double buffer cursor registers is updated by the cursor
vupdate event. There is a gap between vupdate and cursor data
fetch if cursor fetch data reletive to cursor position.
Cursor corruption will happen if we update the cursor surface
in this gap.
[How]
Modify the cursor request mode to the beginning prefetch always
and avoid wraparound calculation issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When the system powers up eDP with external monitors in seamless boot
sequence, stutter get enabled before TTU and HUBP registers being
programmed, which resulting in underflow.
[HOW]
Enable TTU in hubp_init.
Change the sequence that do not perpare_bandwidth and optimize_bandwidth
while having seamless boot streams.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Updating the cursor enablement register can be a slow operation and accumulates
when high polling rate cursors cause frequent updates asynchronously to the
cursor position.
[how]
Since the cursor enable bit is cached there is no need to update the
enablement register if there is no change to it. This removes the
read-modify-write from the cursor position programming path in HUBP and
DPP, leaving only the register writes.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sung Lee <sung.lee@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When HUBP is power gated, the SW state can get out of sync with the
hardware state causing cursor to not be programmed correctly.
[How]
Similar to DPP, add a HUBP reset function which is called wherever
HUBP is initialized or powergated. This function will clear the cursor
position and attribute cache allowing for proper programming when the
HUBP is brought back up.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sung Lee <sung.lee@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are a few cleanup and refactoring tasks that need to be done
with the DML2.1 wrapper and DC interface to remove dependencies on
legacy structures and N-1 prototypes.
[How]
Implemented pipe_ctx->global_sync.
Implemented new functions to use pipe_ctx->hubp_regs and
pipe_ctx->global_sync:
- hubp_setup2
- hubp_setup_interdependent2
- Several other new functions for DCN 4.01 to support newer structures
Removed dml21_update_pipe_ctx_dchub_regs
Removed dml21_extract_legacy_watermark_set
Removed dml21_populate_pipe_ctx_dlg_param
Removed outdated dcn references in DML2.1 wrapper.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rostrows@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 88c7c56d07c108ed4de319c8dba44aa4b8a38dd1.
SW and HW state are not always matching in some cases causing cursor to
be disabled.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Updating the cursor enablement register can be a slow operation and accumulates
when high polling rate cursors cause frequent updates asynchronously to the
cursor position.
[how]
Since the cursor enable bit is cached there is no need to update the
enablement register if there is no change to it. This removes the
read-modify-write from the cursor position programming path in HUBP and
DPP, leaving only the register writes.
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The `dc_tiling_info` union previously did not have a field to
specify the active GFX format, assuming only one format would
be used per DCN version. from DCN4+, support for switching
between different GFX formats is introduced, requiring a way
to track which format is currently in use.
[HOW]
Updated the `dc_tiling_info` union to include a new field that
explicitly indicates the currently used GFX format.
This allows the system to determine the active GFX format
and take the correct programming path accordingly.
[Description]
The union `dc_tiling_info` has been updated to support multiple
GFX formats by adding a new field for identifying the active format.
This update ensures that the correct programming path is followed
based on the selected format. All references to `dc_tiling_info`
in the codebase have been updated to reflect the new structure.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds clear_tiling callbacks to the hubp structure that
will be used for drm panic support to clear the tiling on
a display. hubp3 support from Jocelyn's original patch
and the rest from me.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lu Yao <yaolu@kylinos.cn>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
[Why]
Expose DCN401 HUBP functions for use across other platforms.
[Description]
This change aims to make the DCN401 HUBP functions accessible for
enabling their use in future platform developments.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/hubp/dcn35/dcn35_hubp.c:191:19: warning:
symbol 'dcn35_hubp_funcs' was not declared. Should it be static?
This symbol is not used outside of dcn35_hubp.c, so marks it static.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
P-State force programming is handled entirely by FW in FAMS2. Remove
any programming from driver side to prevent incorrect programming from
driver side (which may override FW programming)
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Cursor position code had improper offsets in scaled modes.
[HOW]
Adjust cursor scaling to account for cursor offsets properly.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sung Lee <sunglee@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Poniters, such as dc->clk_mgr, are null checked previously in the same
function, so Coverity warns "implies that "dc->clk_mgr" might be null".
As a result, these pointers need to be checked when used again.
This fixes 10 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain situations cause pipes to have a recout of 0, such as when the
dst_rect lies completely outside of a given ODM slice.
[How]
Skip calculation that transforms cursor coordinates to viewport space.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
According to register specifications, the CURSOR_DST_X_OFFSET
is relative to the start of the data viewport, not RECOUT space.
In this case we must transform the cursor coordinates passed to
hubp401_cursor_set_position into viewport space to program this
register. This fixes an underflow issue that occurs in scaled
mode with low refresh rate.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Current code for cursor positions does not work properly
with different ODM options and HW rotations like ODM
2to1, 3to1 and 4to1, and has different issues depending on
angle of HW rotations.
[HOW]
Fixed these issues so to work properly when ODM is used with HW rotations.
Reviewed-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
