mirror of
https://github.com/torvalds/linux.git
synced 2026-10-17 06:20:02 +02:00
master
9415 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Gaurav Batra
|
1471c517cf |
powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory
Leverage ARCH_HAS_DMA_MAP_DIRECT config option for coherent allocations as well. This will bypass DMA ops for memory allocations that have been pre-mapped. Always set device bus_dma_limit when memory is pre-mapped. In some architectures, like PowerPC, pmemory can be converted to regular memory via daxctl command. This will gate the coherent allocations to pre-mapped RAM only, by dma_coherent_ok(). Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20251107161105.85999-1-gbatra@linux.ibm.com |
||
|
Christophe Leroy
|
fb7903771c |
powerpc/32s: Fix segments setup when TASK_SIZE is not a multiple of 256M
For book3s/32 it is assumed that TASK_SIZE is a multiple of 256 Mbytes, but Kconfig allows any value for TASK_SIZE. In all relevant calculations, align TASK_SIZE to the upper 256 Mbytes boundary. Also use ASM_CONST() in the definition of TASK_SIZE to ensure it is seen as an unsigned constant. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/8928d906079e156c59794c41e826a684eaaaebb4.1766574657.git.chleroy@kernel.org |
||
|
Christophe Leroy (CS GROUP)
|
608328ba5b |
powerpc/32: Restore disabling of interrupts at interrupt/syscall exit
Commit |
||
|
Finn Thain
|
b94b735675 |
powerpc: Add reloc_offset() to font bitmap pointer used for bootx_printf()
Since Linux v6.7, booting using BootX on an Old World PowerMac produces
an early crash. Stan Johnson writes, "the symptoms are that the screen
goes blank and the backlight stays on, and the system freezes (Linux
doesn't boot)."
Further testing revealed that the failure can be avoided by disabling
CONFIG_BOOTX_TEXT. Bisection revealed that the regression was caused by
a change to the font bitmap pointer that's used when btext_init() begins
painting characters on the display, early in the boot process.
Christophe Leroy explains, "before kernel text is relocated to its final
location ... data is addressed with an offset which is added to the
Global Offset Table (GOT) entries at the start of bootx_init()
by function reloc_got2(). But the pointers that are located inside a
structure are not referenced in the GOT and are therefore not updated by
reloc_got2(). It is therefore needed to apply the offset manually by using
PTRRELOC() macro."
Cc: stable@vger.kernel.org
Link: https://lists.debian.org/debian-powerpc/2025/10/msg00111.html
Link: https://lore.kernel.org/linuxppc-dev/d81ddca8-c5ee-d583-d579-02b19ed95301@yahoo.com/
Reported-by: Cedar Maxwell <cedarmaxwell@mac.com>
Closes: https://lists.debian.org/debian-powerpc/2025/09/msg00031.html
Bisected-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Fixes:
|
||
|
Linus Torvalds
|
a7405aa92f |
dma-mapping updates for Linux 6.19:
- next part of DMA mapping API refactoring to physical addresses as the primary interface instead of page+offset parameters; this time dma_map_ops callbacks are converted to physical addresses, what in turn results also in some simplification of architecture specific code (Leon Romanovsky and Jason Gunthorpe) - clarify that dma_map_benchmark is not a kernel self-test, but standalone tool (Qinxin Xia) -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaTLpeQAKCRCJp1EFxbsS RKlAAQCo/gVslheoJ+h4Hk5oUjLfVQaiamJOlzxw12EVHVAs3AEA7GILIAL1GbGn EpkgwjIuz/J/4aGhNbYO6J+C1qMAHww= =aM6P -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.19-2025-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux Pull dma-mapping updates from Marek Szyprowski: - More DMA mapping API refactoring to physical addresses as the primary interface instead of page+offset parameters. This time dma_map_ops callbacks are converted to physical addresses, what in turn results also in some simplification of architecture specific code (Leon Romanovsky and Jason Gunthorpe) - Clarify that dma_map_benchmark is not a kernel self-test, but standalone tool (Qinxin Xia) * tag 'dma-mapping-6.19-2025-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: dma-mapping: remove unused map_page callback xen: swiotlb: Convert mapping routine to rely on physical address x86: Use physical address for DMA mapping sparc: Use physical address DMA mapping powerpc: Convert to physical address DMA mapping parisc: Convert DMA map_page to map_phys interface MIPS/jazzdma: Provide physical address directly alpha: Convert mapping routine to rely on physical address dma-mapping: remove unused mapping resource callbacks xen: swiotlb: Switch to physical address mapping callbacks ARM: dma-mapping: Switch to physical address mapping callbacks ARM: dma-mapping: Reduce struct page exposure in arch_sync_dma*() dma-mapping: convert dummy ops to physical address mapping dma-mapping: prepare dma_map_ops to conversion to physical address tools/dma: move dma_map_benchmark from selftests to tools/dma |
||
|
Linus Torvalds
|
ad952db4a8 |
powerpc updates for 6.19
- Restore clearing of MSR[RI] at interrupt/syscall exit on 32-bit. - Fix unpaired stwcx on interrupt exit on 32-bit. - Fix race condition leading to double list-add in mac_hid_toggle_emumouse(). - Fix mprotect on book3s 32-bit. - Fix SLB multihit issue during SLB preload with 64-bit hash MMU. - Add support for crashkernel CMA reservation. - Add die_id and die_cpumask for Power10 & later to expose chip hemispheres. - A series of minor fixes and improvements to the hash SLB code. Thanks to: Antonio Alvarez Feijoo, Ben Collins, Bhaskar Chowdhury, Christophe Leroy, Daniel Thompson, Dave Vasilevsky, Donet Tom, J. Neuschäfer, Kunwu Chan, Long Li, Naresh Kamboju, Nathan Chancellor, Ritesh Harjani (IBM), Shirisha G, Shrikanth Hegde, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Thomas Zimmermann, Venkat Rao Bagalkote, Vishal Chourasia. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCaTFrpQAKCRAF0oADX8se IaVSAPwJazU+gxYwIe9mB7Mt9w1N04voW7LmX4tcj83i/Xd5QgEAsXfdpYeo3Tvb VPIOXVGVxOxAccyQ7Yw5QF4BPv+8FAc= =h6Ed -----END PGP SIGNATURE----- Merge tag 'powerpc-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Restore clearing of MSR[RI] at interrupt/syscall exit on 32-bit - Fix unpaired stwcx on interrupt exit on 32-bit - Fix race condition leading to double list-add in mac_hid_toggle_emumouse() - Fix mprotect on book3s 32-bit - Fix SLB multihit issue during SLB preload with 64-bit hash MMU - Add support for crashkernel CMA reservation - Add die_id and die_cpumask for Power10 & later to expose chip hemispheres - A series of minor fixes and improvements to the hash SLB code Thanks to Antonio Alvarez Feijoo, Ben Collins, Bhaskar Chowdhury, Christophe Leroy, Daniel Thompson, Dave Vasilevsky, Donet Tom, J. Neuschäfer, Kunwu Chan, Long Li, Naresh Kamboju, Nathan Chancellor, Ritesh Harjani (IBM), Shirisha G, Shrikanth Hegde, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Thomas Zimmermann, Venkat Rao Bagalkote, and Vishal Chourasia. * tag 'powerpc-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (32 commits) macintosh/via-pmu-backlight: Include <linux/fb.h> and <linux/of.h> powerpc/powermac: backlight: Include <linux/of.h> powerpc/64s/slb: Add no_slb_preload early cmdline param powerpc/64s/slb: Make preload_add return type as void powerpc/ptdump: Dump PXX level info for kernel_page_tables powerpc/64s/pgtable: Enable directMap counters in meminfo for Hash powerpc/64s/hash: Update directMap page counters for Hash powerpc/64s/hash: Hash hpt_order should be only available with Hash MMU powerpc/64s/hash: Improve hash mmu printk messages powerpc/64s/hash: Fix phys_addr_t printf format in htab_initialize() powerpc/64s/ptdump: Fix kernel_hash_pagetable dump for ISA v3.00 HPTE format powerpc/64s/hash: Restrict stress_hpt_struct memblock region to within RMA limit powerpc/64s/slb: Fix SLB multihit issue during SLB preload powerpc, mm: Fix mprotect on book3s 32-bit powerpc/smp: Expose die_id and die_cpumask powerpc/83xx: Add a null pointer check to mcu_gpiochip_add arch:powerpc:tools This file was missing shebang line, so added it kexec: Include kernel-end even without crashkernel powerpc: p2020: Rename wdt@ nodes to watchdog@ powerpc: 86xx: Rename wdt@ nodes to watchdog@ ... |
||
|
Linus Torvalds
|
ce5cfb0fa2 |
IOMMU Updates for Linux v6.19
Including:
- Introduction of the generic IO page-table framework with support for
Intel and AMD IOMMU formats from Jason. This has good potential for
unifying more IO page-table implementations and making future
enhancements more easy. But this also needed quite some fixes during
development. All known issues have been fixed, but my feeling is that
there is a higher potential than usual that more might be needed.
- Intel VT-d updates:
- Use right invalidation hint in qi_desc_iotlb().
- Reduce the scope of INTEL_IOMMU_FLOPPY_WA.
- ARM-SMMU updates:
- Qualcomm device-tree binding updates for Kaanapali and Glymur SoCs
and a new clock for the TBU.
- Fix error handling if level 1 CD table allocation fails.
- Permit more than the architectural maximum number of SMRs for funky
Qualcomm mis-implementations of SMMUv2.
- Mediatek driver:
- MT8189 iommu support.
- Move ARM IO-pgtable selftests to kunit.
- Device leak fixes for a couple of drivers.
- Random smaller fixes and improvements.
-----BEGIN PGP SIGNATURE-----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=KG7j
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
- Introduction of the generic IO page-table framework with support for
Intel and AMD IOMMU formats from Jason.
This has good potential for unifying more IO page-table
implementations and making future enhancements more easy. But this
also needed quite some fixes during development. All known issues
have been fixed, but my feeling is that there is a higher potential
than usual that more might be needed.
- Intel VT-d updates:
- Use right invalidation hint in qi_desc_iotlb()
- Reduce the scope of INTEL_IOMMU_FLOPPY_WA
- ARM-SMMU updates:
- Qualcomm device-tree binding updates for Kaanapali and Glymur SoCs
and a new clock for the TBU.
- Fix error handling if level 1 CD table allocation fails.
- Permit more than the architectural maximum number of SMRs for
funky Qualcomm mis-implementations of SMMUv2.
- Mediatek driver:
- MT8189 iommu support
- Move ARM IO-pgtable selftests to kunit
- Device leak fixes for a couple of drivers
- Random smaller fixes and improvements
* tag 'iommu-updates-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (81 commits)
iommupt/vtd: Support mgaw's less than a 4 level walk for first stage
iommupt/vtd: Allow VT-d to have a larger table top than the vasz requires
powerpc/pseries/svm: Make mem_encrypt.h self contained
genpt: Make GENERIC_PT invisible
iommupt: Avoid a compiler bug with sw_bit
iommu/arm-smmu-qcom: Enable use of all SMR groups when running bare-metal
iommupt: Fix unlikely flows in increase_top()
iommu/amd: Propagate the error code returned by __modify_irte_ga() in modify_irte_ga()
MAINTAINERS: Update my email address
iommu/arm-smmu-v3: Fix error check in arm_smmu_alloc_cd_tables
dt-bindings: iommu: qcom_iommu: Allow 'tbu' clock
iommu/vt-d: Restore previous domain::aperture_end calculation
iommu/vt-d: Fix unused invalidation hint in qi_desc_iotlb
iommu/vt-d: Set INTEL_IOMMU_FLOPPY_WA depend on BLK_DEV_FD
iommu/tegra: fix device leak on probe_device()
iommu/sun50i: fix device leak on of_xlate()
iommu/omap: simplify probe_device() error handling
iommu/omap: fix device leaks on probe_device()
iommu/mediatek-v1: add missing larb count sanity check
iommu/mediatek-v1: fix device leaks on probe()
...
|
||
|
Donet Tom
|
00312419f0 |
powerpc/64s/slb: Fix SLB multihit issue during SLB preload
On systems using the hash MMU, there is a software SLB preload cache that
mirrors the entries loaded into the hardware SLB buffer. This preload
cache is subject to periodic eviction — typically after every 256 context
switches — to remove old entry.
To optimize performance, the kernel skips switch_mmu_context() in
switch_mm_irqs_off() when the prev and next mm_struct are the same.
However, on hash MMU systems, this can lead to inconsistencies between
the hardware SLB and the software preload cache.
If an SLB entry for a process is evicted from the software cache on one
CPU, and the same process later runs on another CPU without executing
switch_mmu_context(), the hardware SLB may retain stale entries. If the
kernel then attempts to reload that entry, it can trigger an SLB
multi-hit error.
The following timeline shows how stale SLB entries are created and can
cause a multi-hit error when a process moves between CPUs without a
MMU context switch.
CPU 0 CPU 1
----- -----
Process P
exec swapper/1
load_elf_binary
begin_new_exc
activate_mm
switch_mm_irqs_off
switch_mmu_context
switch_slb
/*
* This invalidates all
* the entries in the HW
* and setup the new HW
* SLB entries as per the
* preload cache.
*/
context_switch
sched_migrate_task migrates process P to cpu-1
Process swapper/0 context switch (to process P)
(uses mm_struct of Process P) switch_mm_irqs_off()
switch_slb
load_slb++
/*
* load_slb becomes 0 here
* and we evict an entry from
* the preload cache with
* preload_age(). We still
* keep HW SLB and preload
* cache in sync, that is
* because all HW SLB entries
* anyways gets evicted in
* switch_slb during SLBIA.
* We then only add those
* entries back in HW SLB,
* which are currently
* present in preload_cache
* (after eviction).
*/
load_elf_binary continues...
setup_new_exec()
slb_setup_new_exec()
sched_switch event
sched_migrate_task migrates
process P to cpu-0
context_switch from swapper/0 to Process P
switch_mm_irqs_off()
/*
* Since both prev and next mm struct are same we don't call
* switch_mmu_context(). This will cause the HW SLB and SW preload
* cache to go out of sync in preload_new_slb_context. Because there
* was an SLB entry which was evicted from both HW and preload cache
* on cpu-1. Now later in preload_new_slb_context(), when we will try
* to add the same preload entry again, we will add this to the SW
* preload cache and then will add it to the HW SLB. Since on cpu-0
* this entry was never invalidated, hence adding this entry to the HW
* SLB will cause a SLB multi-hit error.
*/
load_elf_binary continues...
START_THREAD
start_thread
preload_new_slb_context
/*
* This tries to add a new EA to preload cache which was earlier
* evicted from both cpu-1 HW SLB and preload cache. This caused the
* HW SLB of cpu-0 to go out of sync with the SW preload cache. The
* reason for this was, that when we context switched back on CPU-0,
* we should have ideally called switch_mmu_context() which will
* bring the HW SLB entries on CPU-0 in sync with SW preload cache
* entries by setting up the mmu context properly. But we didn't do
* that since the prev mm_struct running on cpu-0 was same as the
* next mm_struct (which is true for swapper / kernel threads). So
* now when we try to add this new entry into the HW SLB of cpu-0,
* we hit a SLB multi-hit error.
*/
WARNING: CPU: 0 PID: 1810970 at arch/powerpc/mm/book3s64/slb.c:62
assert_slb_presence+0x2c/0x50(48 results) 02:47:29 [20157/42149]
Modules linked in:
CPU: 0 UID: 0 PID: 1810970 Comm: dd Not tainted 6.16.0-rc3-dirty #12
VOLUNTARY
Hardware name: IBM pSeries (emulated by qemu) POWER8 (architected)
0x4d0200 0xf000004 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c00000000015426c LR: c0000000001543b4 CTR: 0000000000000000
REGS: c0000000497c77e0 TRAP: 0700 Not tainted (6.16.0-rc3-dirty)
MSR: 8000000002823033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 28888482 XER: 00000000
CFAR: c0000000001543b0 IRQMASK: 3
<...>
NIP [c00000000015426c] assert_slb_presence+0x2c/0x50
LR [c0000000001543b4] slb_insert_entry+0x124/0x390
Call Trace:
0x7fffceb5ffff (unreliable)
preload_new_slb_context+0x100/0x1a0
start_thread+0x26c/0x420
load_elf_binary+0x1b04/0x1c40
bprm_execve+0x358/0x680
do_execveat_common+0x1f8/0x240
sys_execve+0x58/0x70
system_call_exception+0x114/0x300
system_call_common+0x160/0x2c4
>From the above analysis, during early exec the hardware SLB is cleared,
and entries from the software preload cache are reloaded into hardware
by switch_slb. However, preload_new_slb_context and slb_setup_new_exec
also attempt to load some of the same entries, which can trigger a
multi-hit. In most cases, these additional preloads simply hit existing
entries and add nothing new. Removing these functions avoids redundant
preloads and eliminates the multi-hit issue. This patch removes these
two functions.
We tested process switching performance using the context_switch
benchmark on POWER9/hash, and observed no regression.
Without this patch: 129041 ops/sec
With this patch: 129341 ops/sec
We also measured SLB faults during boot, and the counts are essentially
the same with and without this patch.
SLB faults without this patch: 19727
SLB faults with this patch: 19786
Fixes:
|
||
|
Srikar Dronamraju
|
fb2ff9fa72 |
powerpc/smp: Expose die_id and die_cpumask
>From Power10 processors onwards, each chip has 2 hemispheres. For LPARs
running on PowerVM Hypervisor, hypervisor determines the allocation of
CPU groups to each LPAR, resulting in two LPARs with the same number of
CPUs potentially having different numbers of CPUs from each hemisphere.
Additionally, it is not feasible to ascertain the hemisphere based
solely on the CPU number.
Users wishing to assign their workload to all CPUs, or a subset of CPUs
within a specific hemisphere, encounter difficulties in identifying the
cpumask. To address this, it is proposed to expose hemisphere
information as a die in sysfs. This aligns with other architectures
and facilitates the identification of CPUs within the same hemisphere.
Tools such as lstopo can also access this information.
Please note: The hypervisor reveals the locality of the CPUs to
hemispheres only in dedicated mode. Consequently, in systems where
hemisphere information is unavailable, such as shared LPARs, the
die_cpus information in sysfs will mirror package_cpus, with
die_id set to -1.
Without this change.
$ grep . /sys/devices/system/cpu/cpu16/topology/{die*,package*} 2>/dev/null
/sys/devices/system/cpu/cpu16/topology/package_cpus:000000,000000ff,ffff0000
/sys/devices/system/cpu/cpu16/topology/package_cpus_list:16-39
With this change.
$ grep . /sys/devices/system/cpu/cpu16/topology/{die*,package*} 2>/dev/null
/sys/devices/system/cpu/cpu16/topology/die_cpus:000000,00000000,00ff0000
/sys/devices/system/cpu/cpu16/topology/die_cpus_list:16-23
/sys/devices/system/cpu/cpu16/topology/die_id:2
/sys/devices/system/cpu/cpu16/topology/package_cpus:000000,000000ff,ffff0000
/sys/devices/system/cpu/cpu16/topology/package_cpus_list:16-39
snipped lstopo-no-graphics o/p
Group0 L#0 (total=8747584KB)
Package L#0 (total=3564096KB CPUModel="POWER10 (architected), altivec supported" CPURevision="2.0 (pvr 0080 0200)")
NUMANode L#0 (P#0 local=3564096KB total=3564096KB)
Die L#0 (P#0)
Core L#0 (P#0)
<snipped>
Package L#1 (total=5183488KB CPUModel="POWER10 (architected), altivec supported" CPURevision="2.0 (pvr 0080 0200)")
NUMANode L#1 (P#1 local=5183488KB total=5183488KB)
Die L#2 (P#2)
Core L#2 (P#16)
L3Cache L#4 (size=4096KB linesize=128 ways=16)
L2Cache L#4 (size=1024KB linesize=128 ways=8)
L1dCache L#4 (size=32KB linesize=128 ways=8)
L1iCache L#4 (size=48KB linesize=128 ways=6)
PU L#16 (P#16)
PU L#17 (P#18)
PU L#18 (P#20)
PU L#19 (P#22)
L3Cache L#5 (size=4096KB linesize=128 ways=16)
L2Cache L#5 (size=1024KB linesize=128 ways=8)
L1dCache L#5 (size=32KB linesize=128 ways=8)
L1iCache L#5 (size=48KB linesize=128 ways=6)
PU L#20 (P#17)
PU L#21 (P#19)
PU L#22 (P#21)
PU L#23 (P#23)
Die L#3 (P#3)
Core L#3 (P#24)
L3Cache L#6 (size=4096KB linesize=128 ways=16)
L2Cache L#6 (size=1024KB linesize=128 ways=8)
L1dCache L#6 (size=32KB linesize=128 ways=8)
L1iCache L#6 (size=48KB linesize=128 ways=6)
PU L#24 (P#24)
PU L#25 (P#26)
PU L#26 (P#28)
PU L#27 (P#30)
L3Cache L#7 (size=4096KB linesize=128 ways=16)
L2Cache L#7 (size=1024KB linesize=128 ways=8)
L1dCache L#7 (size=32KB linesize=128 ways=8)
L1iCache L#7 (size=48KB linesize=128 ways=6)
PU L#28 (P#25)
PU L#29 (P#27)
PU L#30 (P#29)
PU L#31 (P#31)
Core L#4 (P#32)
L3Cache L#8 (size=4096KB linesize=128 ways=16)
L2Cache L#8 (size=1024KB linesize=128 ways=8)
L1dCache L#8 (size=32KB linesize=128 ways=8)
L1iCache L#8 (size=48KB linesize=128 ways=6)
PU L#32 (P#32)
PU L#33 (P#34)
PU L#34 (P#36)
PU L#35 (P#38)
L3Cache L#9 (size=4096KB linesize=128 ways=16)
L2Cache L#9 (size=1024KB linesize=128 ways=8)
L1dCache L#9 (size=32KB linesize=128 ways=8)
L1iCache L#9 (size=48KB linesize=128 ways=6)
PU L#36 (P#33)
PU L#37 (P#35)
PU L#38 (P#37)
PU L#39 (P#39)
Group0 L#1 (total=7736896KB)
Package L#2 (total=5170880KB CPUModel="POWER10 (architected), altivec supported" CPURevision="2.0 (pvr 0080 0200)")
NUMANode L#2 (P#2 local=5170880KB total=5170880KB)
Die L#4 (P#4)
<snipped>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251112074859.814087-1-srikar@linux.ibm.com
|
||
|
Nathan Chancellor
|
d2be62d585 |
powerpc/vmlinux.lds: Drop .interp description
Commit
|
||
|
Christophe Leroy
|
10e1c77c36 |
powerpc/32: Fix unpaired stwcx. on interrupt exit
Commit |
||
|
Christophe Leroy
|
2997876c4a |
powerpc/32: Restore clearing of MSR[RI] at interrupt/syscall exit
Commit |
||
|
Christophe Leroy
|
98fa236044 |
powerpc/8xx: Remove specific code from fast_exception_return
The label 2: in fast_exception_return is a leftover from
commit
|
||
|
Sourabh Jain
|
b4a96ab50f |
powerpc/kdump: Add support for crashkernel CMA reservation
Commit |
||
|
Christian Brauner
|
b36d4b6aa8
|
arch: hookup listns() system call
Add the listns() system call to all architectures. Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-20-2e6f823ebdc0@kernel.org Tested-by: syzbot@syzkaller.appspotmail.com Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Leon Romanovsky
|
a10d648d13 |
powerpc: Convert to physical address DMA mapping
Adapt PowerPC DMA to use physical addresses in order to prepare code to removal .map_page and .unmap_page. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20251015-remove-map-page-v5-10-3bbfe3a25cdf@kernel.org |
||
|
Nicolin Chen
|
fd714986e4 |
iommu: Pass in old domain to attach_dev callback functions
The IOMMU core attaches each device to a default domain on probe(). Then, every new "attach" operation has a fundamental meaning of two-fold: - detach from its currently attached (old) domain - attach to a given new domain Modern IOMMU drivers following this pattern usually want to clean up the things related to the old domain, so they call iommu_get_domain_for_dev() to fetch the old domain. Pass in the old domain pointer from the core to drivers, aligning with the set_dev_pasid op that does so already. Ensure all low-level attach fcuntions in the core can forward the correct old domain pointer. Thus, rework those functions as well. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> |
||
|
Sourabh Jain
|
0843ba4584 |
powerpc/fadump: skip parameter area allocation when fadump is disabled
Fadump allocates memory to pass additional kernel command-line argument to the fadump kernel. However, this allocation is not needed when fadump is disabled. So avoid allocating memory for the additional parameter area in such cases. Fixes: |
||
|
Linus Torvalds
|
2f2c725493 |
pci-v6.18-changes
-----BEGIN PGP SIGNATURE-----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=BUw/
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
||
|
Linus Torvalds
|
a498d59c46 |
dma-mapping updates for Linux 6.18:
- refactoring of DMA mapping API to physical addresses as the primary interface instead of page+offset parameters; this gets much closer to Matthew Wilcox's long term wish for struct-pageless IO to cacheable DRAM and is supporting memdesc project which seeks to substantially transform how struct page works; an advantage of this approach is the possibility of introducing DMA_ATTR_MMIO, which covers existing 'dma_map_resource' flow in the common paths, what in turn lets to use recently introduced dma_iova_link() API to map PCI P2P MMIO without creating struct page; developped by Leon Romanovsky and Jason Gunthorpe - minor clean-up by Petr Tesarik and Qianfeng Rong -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaNugqAAKCRCJp1EFxbsS RBvDAQCEd4P6pz6ROQHf5BfiF5J1db2H6bWsFLjajx3KfNWf8gD+P0eQ0hTzLrcd zuSKZTivviOiyjXlt/9GOaXXPnmTwA0= =b0nZ -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux Pull dma-mapping updates from Marek Szyprowski: - Refactoring of DMA mapping API to physical addresses as the primary interface instead of page+offset parameters This gets much closer to Matthew Wilcox's long term wish for struct-pageless IO to cacheable DRAM and is supporting memdesc project which seeks to substantially transform how struct page works. An advantage of this approach is the possibility of introducing DMA_ATTR_MMIO, which covers existing 'dma_map_resource' flow in the common paths, what in turn lets to use recently introduced dma_iova_link() API to map PCI P2P MMIO without creating struct page Developped by Leon Romanovsky and Jason Gunthorpe - Minor clean-up by Petr Tesarik and Qianfeng Rong * tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: kmsan: fix missed kmsan_handle_dma() signature conversion mm/hmm: properly take MMIO path mm/hmm: migrate to physical address-based DMA mapping API dma-mapping: export new dma_*map_phys() interface xen: swiotlb: Open code map_resource callback dma-mapping: implement DMA_ATTR_MMIO for dma_(un)map_page_attrs() kmsan: convert kmsan_handle_dma to use physical addresses dma-mapping: convert dma_direct_*map_page to be phys_addr_t based iommu/dma: implement DMA_ATTR_MMIO for iommu_dma_(un)map_phys() iommu/dma: rename iommu_dma_*map_page to iommu_dma_*map_phys dma-mapping: rename trace_dma_*map_page to trace_dma_*map_phys dma-debug: refactor to use physical addresses for page mapping iommu/dma: implement DMA_ATTR_MMIO for dma_iova_link(). dma-mapping: introduce new DMA attribute to indicate MMIO memory swiotlb: Remove redundant __GFP_NOWARN dma-direct: clean up the logic in __dma_direct_alloc_pages() |
||
|
Linus Torvalds
|
6c7340a7a8 |
Scheduler updates for v6.18:
Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and
other resources. (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(),
as the warning was getting triggered on certain topologies.
(Peter Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=8ZTZ
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling to when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and other
resources (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
warning was getting triggered on certain topologies (Peter
Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)"
* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix some typos in include/linux/preempt.h
sched: Make migrate_{en,dis}able() inline
rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
sched/fair: Do not balance task to a throttled cfs_rq
sched/fair: Do not special case tasks in throttled hierarchy
sched/fair: update_cfs_group() for throttled cfs_rqs
sched/fair: Propagate load for throttled cfs_rq
sched/fair: Get rid of throttled_lb_pair()
sched/fair: Task based throttle time accounting
sched/fair: Switch to task based throttle model
sched/fair: Implement throttle task work and related helpers
sched/fair: Add related data structure for task based throttle
sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
sched: Move STDL_INIT() functions out-of-line
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
sched/deadline: Fix race in push_dl_task()
|
||
|
Linus Torvalds
|
417552999d |
powerpc updates for 6.18
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to: Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira Rajeev, Cédric Le Goater, Christophe Leroy,
Erhard Furtner, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence, Kajol Jain, Kienan Stewart,
Linus Walleij, Mahesh Salgaonkar, Nam Cao, Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas Gleixner, Thomas Huth, Thorsten Blum,
Tyrel Datwyler, Venkat Rao Bagalkote,
-----BEGIN PGP SIGNATURE-----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=U2s/
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira
Rajeev, Cédric Le Goater, Christophe Leroy, Erhard Furtner, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence,
Kajol Jain, Kienan Stewart, Linus Walleij, Mahesh Salgaonkar, Nam Cao,
Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas
Gleixner, Thomas Huth, Thorsten Blum, Tyrel Datwyler, and Venkat Rao
Bagalkote.
* tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (49 commits)
powerpc/pseries: Define __u{8,32} types in papr_hvpipe_hdr struct
genirq/msi: Remove msi_post_free()
powerpc/perf/vpa-dtl: Add documentation for VPA dispatch trace log PMU
powerpc/perf/vpa-dtl: Handle the writing of perf record when aux wake up is needed
powerpc/perf/vpa-dtl: Add support to capture DTL data in aux buffer
powerpc/perf/vpa-dtl: Add support to setup and free aux buffer for capturing DTL data
docs: ABI: sysfs-bus-event_source-devices-vpa-dtl: Document sysfs event format entries for vpa_dtl pmu
powerpc/vpa_dtl: Add interface to expose vpa dtl counters via perf
powerpc/time: Expose boot_tb via accessor
powerpc/32: Remove PAGE_KERNEL_TEXT to fix startup failure
powerpc/fprobe: fix updated fprobe for function-graph tracer
powerpc/ftrace: support CONFIG_FUNCTION_GRAPH_RETVAL
powerpc64/modules: replace stub allocation sentinel with an explicit counter
powerpc64/modules: correctly iterate over stubs in setup_ftrace_ool_stubs
powerpc/ftrace: ensure ftrace record ops are always set for NOPs
powerpc/603: Really copy kernel PGD entries into all PGDIRs
powerpc/8xx: Remove left-over instruction and comments in DataStoreTLBMiss handler
powerpc/pseries: HVPIPE changes to support migration
powerpc/pseries: Enable hvpipe with ibm,set-system-parameter RTAS
powerpc/pseries: Enable HVPIPE event message interrupt
...
|
||
|
Linus Torvalds
|
722df25ddf |
kernel-6.18-rc1.clone3
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZgMQAKCRCRxhvAZXjc ornXAP954dZjz+OJw6lJLCf0j9TXJOczGHvK3oW5ZD9KnqtTdwEA7p1A6WMOKJyl 8VtTgCS0yNt8QlznUnsSDfVm0jXVGAY= =tUXG -----END PGP SIGNATURE----- Merge tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull copy_process updates from Christian Brauner: "This contains the changes to enable support for clone3() on nios2 which apparently is still a thing. The more exciting part of this is that it cleans up the inconsistency in how the 64-bit flag argument is passed from copy_process() into the various other copy_*() helpers" [ Fixed up rv ltl_monitor 32-bit support as per Sasha Levin in the merge ] * tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: nios2: implement architecture-specific portion of sys_clone3 arch: copy_thread: pass clone_flags as u64 copy_process: pass clone_flags as u64 across calltree copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64) |
||
|
Menglong Dong
|
35561bab76 |
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
The include/generated/asm-offsets.h is generated in Kbuild during compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to generate another similar offset header file, circular dependency can happen. For example, we want to generate a offset file include/generated/test.h, which is included in include/sched/sched.h. If we generate asm-offsets.h first, it will fail, as include/sched/sched.h is included in asm-offsets.c and include/generated/test.h doesn't exist; If we generate test.h first, it can't success neither, as include/generated/asm-offsets.h is included by it. In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular dependency. We can generate asm-offsets.h first, and if the COMPILE_OFFSETS is defined, we don't include the "generated/test.h". And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this purpose. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> |
||
|
Aboorva Devarajan
|
2dc019ca39 |
powerpc/time: Expose boot_tb via accessor
- Define accessor function get_boot_tb() to safely return boot_tb value, this is only needed when running in SPLPAR environments, so the accessor is built conditionally under CONFIG_PPC_SPLPAR. - Tag boot_tb as __ro_after_init since it is written once at initialized and never updated afterwards. Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com> Tested-by: Tejas Manhas <tejas05@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250915102947.26681-2-atrajeev@linux.ibm.com |
||
|
Aditya Bodkhe
|
d733f18a6d |
powerpc/ftrace: support CONFIG_FUNCTION_GRAPH_RETVAL
commit |
||
|
Joe Lawrence
|
b137312fbf |
powerpc64/modules: replace stub allocation sentinel with an explicit counter
The logic for allocating ppc64_stub_entry trampolines in the .stubs section relies on an inline sentinel, where a NULL .funcdata member indicates an available slot. While preceding commits fixed the initialization bugs that led to ftrace stub corruption, the sentinel-based approach remains fragile: it depends on an implicit convention between subsystems modifying different struct types in the same memory area. Replace the sentinel with an explicit counter, module->arch.num_stubs. Instead of iterating through memory to find a NULL marker, the module loader uses this counter as the boundary for the next free slot. This simplifies the allocation code, hardens it against future changes to stub structures, and removes the need for an extra relocation slot previously reserved to terminate the sentinel search. Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Naveen N Rao (AMD) <naveen@kernel.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250912142740.3581368-4-joe.lawrence@redhat.com |
||
|
Joe Lawrence
|
f6b4df37eb |
powerpc64/modules: correctly iterate over stubs in setup_ftrace_ool_stubs
CONFIG_PPC_FTRACE_OUT_OF_LINE introduced setup_ftrace_ool_stubs() to
extend the ppc64le module .stubs section with an array of
ftrace_ool_stub structures for each patchable function.
Fix its ppc64_stub_entry stub reservation loop to properly write across
all of the num_stubs used and not just the first entry.
Fixes:
|
||
|
Joe Lawrence
|
5337609a31 |
powerpc/ftrace: ensure ftrace record ops are always set for NOPs
When an ftrace call site is converted to a NOP, its corresponding
dyn_ftrace record should have its ftrace_ops pointer set to
ftrace_nop_ops.
Correct the powerpc implementation to ensure the
ftrace_rec_set_nop_ops() helper is called on all successful NOP
initialization paths. This ensures all ftrace records are consistent
before being handled by the ftrace core.
Fixes:
|
||
|
Christophe Leroy
|
d9e46de4bf |
powerpc/8xx: Remove left-over instruction and comments in DataStoreTLBMiss handler
Commit |
||
|
Haren Myneni
|
26b4fcecea |
powerpc/pseries: Define HVPIPE specific macros
Define HVPIPE specific macros which are needed to support ibm,send-hvpipe-msg and ibm,receive-hvpipe-msg RTAS calls and used to handle HVPIPE message events. Signed-off-by: Haren Myneni <haren@linux.ibm.com> Tested-by: Shashank MS <shashank.gowda@in.ibm.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250909084402.1488456-3-haren@linux.ibm.com |
||
|
Leon Romanovsky
|
e53d29f957 |
dma-mapping: convert dma_direct_*map_page to be phys_addr_t based
Convert the DMA direct mapping functions to accept physical addresses directly instead of page+offset parameters. The functions were already operating on physical addresses internally, so this change eliminates the redundant page-to-physical conversion at the API boundary. The functions dma_direct_map_page() and dma_direct_unmap_page() are renamed to dma_direct_map_phys() and dma_direct_unmap_phys() respectively, with their calling convention changed from (struct page *page, unsigned long offset) to (phys_addr_t phys). Architecture-specific functions arch_dma_map_page_direct() and arch_dma_unmap_page_direct() are similarly renamed to arch_dma_map_phys_direct() and arch_dma_unmap_phys_direct(). The is_pci_p2pdma_page() checks are replaced with DMA_ATTR_MMIO checks to allow integration with dma_direct_map_resource and dma_direct_map_phys() is extended to support MMIO path either. Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/bb15a22f76dc2e26683333ff54e789606cfbfcf0.1757423202.git.leonro@nvidia.com |
||
|
Christophe Leroy
|
58f5382a48 |
powerpc/vdso: Include asm/syscalls.h for sys_ni_syscall()
Include asm/syscalls.h to get the correct prototype for sys_ni_syscall() Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/e2215a515ae0e21393c50e2f38791a6567cf1dec.1755509195.git.christophe.leroy@csgroup.eu |
||
|
Christophe Leroy
|
96c79fef22 |
powerpc/8xx: Remove offset in SPRN_M_TWB
SPRN_M_TWB contains the address of task PGD minus an offset which compensates the offset required when accessing the kernel PGDIR. However, since commit |
||
|
Peter Zijlstra
|
661f951e37 |
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
Leon [1] and Vinicius [2] noted a topology_span_sane() warning during
their testing starting from v6.16-rc1. Debug that followed pointed to
the tl->mask() for the NODE domain being incorrectly resolved to that of
the highest NUMA domain.
tl->mask() for NODE is set to the sd_numa_mask() which depends on the
global "sched_domains_curr_level" hack. "sched_domains_curr_level" is
set to the "tl->numa_level" during tl traversal in build_sched_domains()
calling sd_init() but was not reset before topology_span_sane().
Since "tl->numa_level" still reflected the old value from
build_sched_domains(), topology_span_sane() for the NODE domain trips
when the span of the last NUMA domain overlaps.
Instead of replicating the "sched_domains_curr_level" hack, get rid of
it entirely and instead, pass the entire "sched_domain_topology_level"
object to tl->cpumask() function to prevent such mishap in the future.
sd_numa_mask() now directly references "tl->numa_level" instead of
relying on the global "sched_domains_curr_level" hack to index into
sched_domains_numa_masks[].
The original warning was reproducible on the following NUMA topology
reported by Leon:
$ sudo numactl -H
available: 5 nodes (0-4)
node 0 cpus: 0 1
node 0 size: 2927 MB
node 0 free: 1603 MB
node 1 cpus: 2 3
node 1 size: 3023 MB
node 1 free: 3008 MB
node 2 cpus: 4 5
node 2 size: 3023 MB
node 2 free: 3007 MB
node 3 cpus: 6 7
node 3 size: 3023 MB
node 3 free: 3002 MB
node 4 cpus: 8 9
node 4 size: 3022 MB
node 4 free: 2718 MB
node distances:
node 0 1 2 3 4
0: 10 39 38 37 36
1: 39 10 38 37 36
2: 38 38 10 37 36
3: 37 37 37 10 36
4: 36 36 36 36 10
The above topology can be mimicked using the following QEMU cmd that was
used to reproduce the warning and test the fix:
sudo qemu-system-x86_64 -enable-kvm -cpu host \
-m 20G -smp cpus=10,sockets=10 -machine q35 \
-object memory-backend-ram,size=4G,id=m0 \
-object memory-backend-ram,size=4G,id=m1 \
-object memory-backend-ram,size=4G,id=m2 \
-object memory-backend-ram,size=4G,id=m3 \
-object memory-backend-ram,size=4G,id=m4 \
-numa node,cpus=0-1,memdev=m0,nodeid=0 \
-numa node,cpus=2-3,memdev=m1,nodeid=1 \
-numa node,cpus=4-5,memdev=m2,nodeid=2 \
-numa node,cpus=6-7,memdev=m3,nodeid=3 \
-numa node,cpus=8-9,memdev=m4,nodeid=4 \
-numa dist,src=0,dst=1,val=39 \
-numa dist,src=0,dst=2,val=38 \
-numa dist,src=0,dst=3,val=37 \
-numa dist,src=0,dst=4,val=36 \
-numa dist,src=1,dst=0,val=39 \
-numa dist,src=1,dst=2,val=38 \
-numa dist,src=1,dst=3,val=37 \
-numa dist,src=1,dst=4,val=36 \
-numa dist,src=2,dst=0,val=38 \
-numa dist,src=2,dst=1,val=38 \
-numa dist,src=2,dst=3,val=37 \
-numa dist,src=2,dst=4,val=36 \
-numa dist,src=3,dst=0,val=37 \
-numa dist,src=3,dst=1,val=37 \
-numa dist,src=3,dst=2,val=37 \
-numa dist,src=3,dst=4,val=36 \
-numa dist,src=4,dst=0,val=36 \
-numa dist,src=4,dst=1,val=36 \
-numa dist,src=4,dst=2,val=36 \
-numa dist,src=4,dst=3,val=36 \
...
[ prateek: Moved common functions to include/linux/sched/topology.h,
reuse the common bits for s390 and ppc, commit message ]
Closes: https://lore.kernel.org/lkml/20250610110701.GA256154@unreal/ [1]
Fixes:
|
||
|
Simon Schuster
|
bbc46b23af |
arch: copy_thread: pass clone_flags as u64
With the introduction of clone3 in commit |
||
|
Thomas Huth
|
74db6cc331 |
powerpc: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
While the GCC and Clang compilers already define __ASSEMBLER__ automatically when compiling assembler code, __ASSEMBLY__ is a macro that only gets defined by the Makefiles in the kernel. This is bad since macros starting with two underscores are names that are reserved by the C language. It can also be very confusing for the developers when switching between userspace and kernelspace coding, or when dealing with uapi headers that rather should use __ASSEMBLER__ instead. So let's standardize now on the __ASSEMBLER__ macro that is provided by the compilers. This is almost a completely mechanical patch (done with a simple "sed -i" statement), apart from tweaking two comments manually in arch/powerpc/include/asm/bug.h and arch/powerpc/include/asm/kasan.h (which did not have proper underscores at the end) and fixing a checkpatch error about spaces in arch/powerpc/include/asm/spu_csa.h. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250801082007.32904-3-thuth@redhat.com |
||
|
Madhavan Srinivasan
|
d40ae90334 |
powerpc/prom_init: Fix shellcheck warnings
Fix "Double quote to prevent globbing and word splitting." warning from shellcheck Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Reviewed-by: Stephen Rothwell <sfr@cab.auug.org.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250518044107.39928-3-maddy@linux.ibm.com |
||
|
Madhavan Srinivasan
|
88688a2c8a |
powerpc/kvm: Fix ifdef to remove build warning
When compiling for pseries or powernv defconfig with "make C=1",
these warning were reported bu sparse tool in powerpc/kernel/kvm.c
arch/powerpc/kernel/kvm.c:635:9: warning: switch with no cases
arch/powerpc/kernel/kvm.c:646:9: warning: switch with no cases
Currently #ifdef were added after the switch case which are specific
for BOOKE and PPC_BOOK3S_32. These are not enabled in pseries/powernv
defconfig. Fix it by moving the #ifdef before switch(){}
Fixes:
|
||
|
Masahiro Yamada
|
eb59d4c594 |
powerpc: use always-y instead of extra-y in Makefiles
The extra-y syntax is planned for deprecation because it is similar to always-y. When building the boot wrapper, always-y and extra-y are equivalent. Use always-y instead. In arch/powerpc/kernel/Makefile, I added ifdef KBUILD_BUILTIN to keep the current behavior: prom_init_check is skipped when building only modular objects. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250602163302.478765-1-masahiroy@kernel.org |
||
|
Xichao Zhao
|
8b5d86a63b |
powerpc/64: Drop unnecessary 'rc' variable
Simplify the code to enhance readability and maintain a consistent coding style. Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com> Acked-by: Gautam Menghani <gautam@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250801035908.370463-1-zhao.xichao@vivo.com |
||
|
Niklas Schnelle
|
704e5dd1c0 |
powerpc/eeh: Use result of error_detected() in uevent
Ever since uevent support was added for AER and EEH with commit |
||
|
Linus Torvalds
|
806381e1a2 |
powerpc fixes for 6.17 #2
- Fixes for several issues in the powernv PCI hotplug path - Fix htmldoc generation for htm.rst in toctree - Add jit support for load_acquire and store_release in ppc64 bpf jit Thanks to: Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar Bhaskar, Shawn Anastasio, Timothy Pearson, Vishal Parmar -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmiQDOcACgkQpnEsdPSH ZJRqTBAAkpaZRrbzX6P1fjoTb89esIfY7YSymmXrgMwoF1fgTMzPSjg2Lzwzcjfb Ednlo8Hy+Ei2SDvctNaqtOcZuidn81AJN41aFIu44S/Mj1cde/cuBMKUTqx+ZBO0 gI4Bd4+V7yEv484PF7ZJga9K1VM85THCLgVWJ00VNHVHyvxgAuFiXdWmh6/qMUyi thvvLR+ANuAQz3S4VwbBg3AifDl6LXx2s5VB30xYxnPKzFNKZmnGXKwuOJH7rQe2 J8v99n0tcXW1tRGE4pVykzXg4EXL5zgWT9fJ5EZxbeXaW9sqMxi4VjO4jSsrSZ+K q2v362Dyjgygel9aC2rzN8Q+P5horX2QBR7knJJGa0VtztUiPWKR8za7vGLbzlcm rUvnTuoY1dwFB72Sy3amALalvWscssL/1sHazvRv65RcciW7/PZNVEiZ0xh1RKqb J8nWlb+iNBf2z12qLmS5DvUaveaZG1eyndLeD/knsEC49DEOoEy3t7QM1F7KscRR mYPsEpfjF/D0r+vzb6zl2ykwhJf/t7BNu7MdXH7xbIpj5iwtrhSUfvmx6g2MThzA Vee2QvQACscdop3W/6xgATH4xoq96v1XxMmCLnZ/HVl2PorxO27ad4EMNO4sBG8c 5agWHT7EnoUgwNF30DRtIHd7jNK/jt8++3kZx6CG9hdSboAM/pM= =tTms -----END PGP SIGNATURE----- Merge tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Madhavan Srinivasan: - Fixes for several issues in the powernv PCI hotplug path - Fix htmldoc generation for htm.rst in toctree - Add jit support for load_acquire and store_release in ppc64 bpf jit Thanks to Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar Bhaskar, Shawn Anastasio, Timothy Pearson, and Vishal Parmar * tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc64/bpf: Add jit support for load_acquire and store_release docs: powerpc: add htm.rst to toctree PCI: pnv_php: Enable third attention indicator state PCI: pnv_php: Fix surprise plug detection and recovery powerpc/eeh: Make EEH driver device hotplug safe powerpc/eeh: Export eeh_unfreeze_pe() PCI: pnv_php: Work around switches with broken presence detection PCI: pnv_php: Clean up allocated IRQs on unplug |
||
|
Linus Torvalds
|
e991acf1bc |
Significant patch series in this pull request:
- The 2 patch series "squashfs: Remove page->mapping references" from
Matthew Wilcox gets us closer to being able to remove page->mapping.
- The 5 patch series "relayfs: misc changes" from Jason Xing does some
maintenance and minor feature addition work in relayfs.
- The 5 patch series "kdump: crashkernel reservation from CMA" from Jiri
Bohac switches us from static preallocation of the kdump crashkernel's
working memory over to dynamic allocation. So the difficulty of
a-priori estimation of the second kernel's needs is removed and the
first kernel obtains extra memory.
- The 5 patch series "generalize panic_print's dump function to be used
by other kernel parts" from Feng Tang implements some consolidation and
rationalizatio of the various ways in which a faiing kernel splats
information at the operator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaI+82gAKCRDdBJ7gKXxA
jj4JAP9xb+w9DrBY6sa+7KTPIb+aTqQ7Zw3o9O2m+riKQJv6jAEA6aEwRnDA0451
fDT5IqVlCWGvnVikdZHSnvhdD7TGsQ0=
=rT71
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
|
||
|
Linus Torvalds
|
5f5c9952b3 |
powerpc updates for 6.17
- CONFIG_HZ changes to move the base_slice from 10ms to 1ms - Patchset to move some of the mutex handling to lock guard - Expose secvars relevant to the key management mode - Misc cleanups and fixes Thanks to: Ankit Chauhan, Christophe Leroy, Donet Tom, Gautam Menghani, Haren Myneni, Johan Korsnes, Madadi Vineeth Reddy, Paul Mackerras, Shrikanth Hegde, Srish Srinivasan, Thomas Fourier, Thomas Huth, Thomas Weißschuh, Souradeep, Amit Machhiwal, R Nageswara Sastry, Venkat Rao Bagalkote, Andrew Donnellan, Greg Kroah-Hartman, Mimi Zohar, Mukesh Kumar Chaurasiya, Nayna Jain, Ritesh Harjani (IBM), Sourabh Jain, Srikar Dronamraju, Stefan Berger, Tyrel Datwyler, Kowshik Jois -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmiIMYgACgkQpnEsdPSH ZJRwBhAAibjlhQrzxxGsk4AcLHDIlEqI/KRRIiYjM5gr1p9Ms+o3l8epgcwy4aQO ZcYhYIyyj4Q6ctR29fPdjb0simjOdoQm1gf5atXv7o6kaY/ooIrc4V8YWTXsxwC8 KriPJZnrcvae7muYwzP9oVB6S4rets4Ch66FpXgR/pplxa4LwLmefgmnIB4zWXUi 7u96ZxJ+F/kNGn0X/OtsHpgr9Hmuly6NDk3LH7Smcw0TiL/gTOTZknqm3bNuqw+I IJszbYbnaYslnZfNluJW4aluAv7VuUoYc5JVPn94Msw5rrio5UPcRHF5lBdqyKyE j++y9uuCi6oFfWw48B3o+7iUzeD6LZUqfWDb85nIc95mCKP0kX66WjuHHQlSmR/h WIA0nu9r+FpYOauu2i5fs1A90DnTC+7wdBCFQNYDnCbxxyPuJxBph2YN3ir4heDH VAxRfNw8g51HL5Sc3I8J7gP9+pubuJyS4wKCebghKSU4Uhdw7cWPC3dWACDi4b6t JWTV5+SrANyCy4B2bRj7p2g36xFFdFRXsoNV1RJtboWkcFRihLFDH9vN7mdB6kYi IMm5TQnEUw3UgwddCg2DuSXVg0fMe9R3Ph5VZcAooqYaMzLUWi0lt02Q0QVb4iES adAwIPn2mb/v9EeisL7nJmtYI2UZhfwanu19zrI0lrlH/G8jaKM= =i2VP -----END PGP SIGNATURE----- Merge tag 'powerpc-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Madhavan Srinivasan: - CONFIG_HZ changes to move the base_slice from 10ms to 1ms - Patchset to move some of the mutex handling to lock guard - Expose secvars relevant to the key management mode - Misc cleanups and fixes Thanks to Ankit Chauhan, Christophe Leroy, Donet Tom, Gautam Menghani, Haren Myneni, Johan Korsnes, Madadi Vineeth Reddy, Paul Mackerras, Shrikanth Hegde, Srish Srinivasan, Thomas Fourier, Thomas Huth, Thomas Weißschuh, Souradeep, Amit Machhiwal, R Nageswara Sastry, Venkat Rao Bagalkote, Andrew Donnellan, Greg Kroah-Hartman, Mimi Zohar, Mukesh Kumar Chaurasiya, Nayna Jain, Ritesh Harjani (IBM), Sourabh Jain, Srikar Dronamraju, Stefan Berger, Tyrel Datwyler, and Kowshik Jois. * tag 'powerpc-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (23 commits) arch/powerpc: Remove .interp section in vmlinux powerpc: Drop GPL boilerplate text with obsolete FSF address powerpc: Don't use %pK through printk arch: powerpc: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX misc: ocxl: Replace scnprintf() with sysfs_emit() in sysfs show functions integrity/platform_certs: Allow loading of keys in the static key management mode powerpc/secvar: Expose secvars relevant to the key management mode powerpc/pseries: Correct secvar format representation for static key management (powerpc/512) Fix possible `dma_unmap_single()` on uninitialized pointer powerpc: floppy: Add missing checks after DMA map book3s64/radix : Optimize vmemmap start alignment book3s64/radix : Handle error conditions properly in radix_vmemmap_populate powerpc/pseries/dlpar: Search DRC index from ibm,drc-indexes for IO add KVM: PPC: Book3S HV: Add H_VIRT mapping for tracing exits powerpc: sysdev: use lock guard for mutex powerpc: powernv: ocxl: use lock guard for mutex powerpc: book3s: vas: use lock guard for mutex powerpc: fadump: use lock guard for mutex powerpc: rtas: use lock guard for mutex powerpc: eeh: use lock guard for mutex ... |
||
|
Linus Torvalds
|
bf76f23aa1 |
Scheduler updates for v6.17:
Core scheduler changes:
- Better tracking of maximum lag of tasks in presence of different
slices duration, for better handling of lag in the fair
scheduler. (Vincent Guittot)
- Clean up and standardize #if/#else/#endif markers throughout
the entire scheduler code base (Ingo Molnar)
- Make SMP unconditional: build the SMP scheduler's
data structures and logic on UP kernel too, even though
they are not used, to simplify the scheduler and remove
around 200 #ifdef/[#else]/#endif blocks from the
scheduler. (Ingo Molnar)
- Reorganize cgroup bandwidth control interface handling
for better interfacing with sched_ext (Tejun Heo)
Balancing:
- Bump sd->max_newidle_lb_cost when newidle balance fails (Chris Mason)
- Remove sched_domain_topology_level::flags to simplify the code (Prateek Nayak)
- Simplify and clean up build_sched_topology() (Li Chen)
- Optimize build_sched_topology() on large machines (Li Chen)
Real-time scheduling:
- Add initial version of proxy execution: a mechanism for mutex-owning
tasks to inherit the scheduling context of higher priority waiters.
Currently limited to a single runqueue and conditional on CONFIG_EXPERT,
and other limitations. (John Stultz, Peter Zijlstra, Valentin Schneider)
- Deadline scheduler (Juri Lelli):
- Fix dl_servers initialization order (Juri Lelli)
- Fix DL scheduler's root domain reinitialization logic (Juri Lelli)
- Fix accounting bugs after global limits change (Juri Lelli)
- Fix scalability regression by implementing less agressive dl_server handling
(Peter Zijlstra)
PSI:
- Improve scalability by optimizing psi_group_change() cpu_clock() usage
(Peter Zijlstra)
Rust changes:
- Make Task, CondVar and PollCondVar methods inline to avoid unnecessary
function calls (Kunwu Chan, Panagiotis Foliadis)
- Add might_sleep() support for Rust code: Rust's "#[track_caller]"
mechanism is used so that Rust's might_sleep() doesn't need to be
defined as a macro (Fujita Tomonori)
- Introduce file_from_location() (Boqun Feng)
Debugging & instrumentation:
- Make clangd usable with scheduler source code files again (Peter Zijlstra)
- tools: Add root_domains_dump.py which dumps root domains info (Juri Lelli)
- tools: Add dl_bw_dump.py for printing bandwidth accounting info (Juri Lelli)
Misc cleanups & fixes:
- Remove play_idle() (Feng Lee)
- Fix check_preemption_disabled() (Sebastian Andrzej Siewior)
- Do not call __put_task_struct() on RT if pi_blocked_on is set
(Luis Claudio R. Goncalves)
- Correct the comment in place_entity() (wang wei)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=8T0v
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Better tracking of maximum lag of tasks in presence of different
slices duration, for better handling of lag in the fair scheduler
(Vincent Guittot)
- Clean up and standardize #if/#else/#endif markers throughout the
entire scheduler code base (Ingo Molnar)
- Make SMP unconditional: build the SMP scheduler's data structures
and logic on UP kernel too, even though they are not used, to
simplify the scheduler and remove around 200 #ifdef/[#else]/#endif
blocks from the scheduler (Ingo Molnar)
- Reorganize cgroup bandwidth control interface handling for better
interfacing with sched_ext (Tejun Heo)
Balancing:
- Bump sd->max_newidle_lb_cost when newidle balance fails (Chris
Mason)
- Remove sched_domain_topology_level::flags to simplify the code
(Prateek Nayak)
- Simplify and clean up build_sched_topology() (Li Chen)
- Optimize build_sched_topology() on large machines (Li Chen)
Real-time scheduling:
- Add initial version of proxy execution: a mechanism for
mutex-owning tasks to inherit the scheduling context of higher
priority waiters.
Currently limited to a single runqueue and conditional on
CONFIG_EXPERT, and other limitations (John Stultz, Peter Zijlstra,
Valentin Schneider)
- Deadline scheduler (Juri Lelli):
- Fix dl_servers initialization order (Juri Lelli)
- Fix DL scheduler's root domain reinitialization logic (Juri
Lelli)
- Fix accounting bugs after global limits change (Juri Lelli)
- Fix scalability regression by implementing less agressive
dl_server handling (Peter Zijlstra)
PSI:
- Improve scalability by optimizing psi_group_change() cpu_clock()
usage (Peter Zijlstra)
Rust changes:
- Make Task, CondVar and PollCondVar methods inline to avoid
unnecessary function calls (Kunwu Chan, Panagiotis Foliadis)
- Add might_sleep() support for Rust code: Rust's "#[track_caller]"
mechanism is used so that Rust's might_sleep() doesn't need to be
defined as a macro (Fujita Tomonori)
- Introduce file_from_location() (Boqun Feng)
Debugging & instrumentation:
- Make clangd usable with scheduler source code files again (Peter
Zijlstra)
- tools: Add root_domains_dump.py which dumps root domains info (Juri
Lelli)
- tools: Add dl_bw_dump.py for printing bandwidth accounting info
(Juri Lelli)
Misc cleanups & fixes:
- Remove play_idle() (Feng Lee)
- Fix check_preemption_disabled() (Sebastian Andrzej Siewior)
- Do not call __put_task_struct() on RT if pi_blocked_on is set (Luis
Claudio R. Goncalves)
- Correct the comment in place_entity() (wang wei)"
* tag 'sched-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
sched/idle: Remove play_idle()
sched: Do not call __put_task_struct() on rt if pi_blocked_on is set
sched: Start blocked_on chain processing in find_proxy_task()
sched: Fix proxy/current (push,pull)ability
sched: Add an initial sketch of the find_proxy_task() function
sched: Fix runtime accounting w/ split exec & sched contexts
sched: Move update_curr_task logic into update_curr_se
locking/mutex: Add p->blocked_on wrappers for correctness checks
locking/mutex: Rework task_struct::blocked_on
sched: Add CONFIG_SCHED_PROXY_EXEC & boot argument to enable/disable
sched/topology: Remove sched_domain_topology_level::flags
x86/smpboot: avoid SMT domain attach/destroy if SMT is not enabled
x86/smpboot: moves x86_topology to static initialize and truncate
x86/smpboot: remove redundant CONFIG_SCHED_SMT
smpboot: introduce SDTL_INIT() helper to tidy sched topology setup
tools/sched: Add dl_bw_dump.py for printing bandwidth accounting info
tools/sched: Add root_domains_dump.py which dumps root domains info
sched/deadline: Fix accounting after global limits change
sched/deadline: Reset extra_bw to max_bw when clearing root domains
sched/deadline: Initialize dl_servers after SMP
...
|
||
|
Linus Torvalds
|
22c5696e3f |
Driver core changes for 6.17-rc1
- DEBUGFS
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
- SYSFS
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
- Support cache-ids for device-tree systems
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
- Rust
- Device
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
- Misc
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaIjkhwAKCRBFlHeO1qrK
LpXuAP9RWwfD9ZGgQZ9OsMk/0pZ2mDclaK97jcmI9TAeSxeZMgD1FHnOMTY7oSIi
iG7Muq0yLD+A5gk9HUnMUnFNrngWCg==
=jgRj
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
||
|
Linus Torvalds
|
91e60731dd |
TTY / Serial driver update for 6.17-rc1
Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeWPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymQHgCfR3KXFe7ElzXQqjJhtN/ej6IPijIAoI6k3g0m
4UewNOIef9XpIAJ8zuoo
=850o
-----END PGP SIGNATURE-----
Merge tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain
serial: 8250: fix panic due to PSLVERR
dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible
vt: defkeymap: Map keycodes above 127 to K_HOLE
vt: keyboard: Don't process Unicode characters in K_OFF mode
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: qcom-geni: move clock-rate logic to separate function
serial: qcom-geni: move resource control logic to separate functions
serial: qcom-geni: move resource initialization to separate function
soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms
dt-bindings: qcom: geni-se: describe SA8255p
dt-bindings: serial: describe SA8255p
serial: 8250_dw: Fix typo "notifer"
dt-bindings: serial: 8250: spacemit: set clocks property as required
dt-bindings: serial: renesas: Document RZ/V2N SCIF
serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build
tty: omit need_resched() before cond_resched()
serial: 8250_ni: Reorder local variables
serial: 8250_ni: Fix build warning
...
|
||
|
Linus Torvalds
|
d900c4ce63 |
execve updates for v6.17
- Introduce regular REGSET note macros arch-wide (Dave Martin) - Remove arbitrary 4K limitation of program header size (Yin Fengwei) - Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIVKiAAKCRA2KwveOeQk u4zBAP4zUNj2+XyixVPXCzv+Hkle6zWs7yrzdA2yLxe8Qtwj5AD+N2I6MUGcCFGW W+uWxlWTtGLDqh1CplIUqTlxMi39Og4= =vYnE -----END PGP SIGNATURE----- Merge tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - Introduce regular REGSET note macros arch-wide (Dave Martin) - Remove arbitrary 4K limitation of program header size (Yin Fengwei) - Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi) * tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (25 commits) fork: reorder function qualifiers for copy_clone_args_from_user binfmt_elf: remove the 4k limitation of program header size binfmt_elf: Warn on missing or suspicious regset note names xtensa: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names um: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names x86/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names sh: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names s390/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names riscv: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names parisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names openrisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names nios2: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names LoongArch: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names hexagon: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names csky: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names ... |
||
|
Linus Torvalds
|
57fcb7d930 |
vfs-6.17-rc1.fileattr
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCpgAKCRCRxhvAZXjc oqfFAQDcy3rROUF3W34KcSi7rDmaKVSX53d1tUoqH+1zDRpSlwEAriKDNC1ybudp YAnxVzkRHjHs1296WIuwKq5lfhJ60Q4= =geAl -----END PGP SIGNATURE----- Merge tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull fileattr updates from Christian Brauner: "This introduces the new file_getattr() and file_setattr() system calls after lengthy discussions. Both system calls serve as successors and extensible companions to the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have started to show their age in addition to being named in a way that makes it easy to conflate them with extended attribute related operations. These syscalls allow userspace to set filesystem inode attributes on special files. One of the usage examples is the XFS quota projects. XFS has project quotas which could be attached to a directory. All new inodes in these directories inherit project ID set on parent directory. The project is created from userspace by opening and calling FS_IOC_FSSETXATTR on each inode. This is not possible for special files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left with empty project ID. Those inodes then are not shown in the quota accounting but still exist in the directory. This is not critical but in the case when special files are created in the directory with already existing project quota, these new inodes inherit extended attributes. This creates a mix of special files with and without attributes. Moreover, special files with attributes don't have a possibility to become clear or change the attributes. This, in turn, prevents userspace from re-creating quota project on these existing files. In addition, these new system calls allow the implementation of additional attributes that we couldn't or didn't want to fit into the legacy ioctls anymore" * tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: tighten a sanity check in file_attr_to_fileattr() tree-wide: s/struct fileattr/struct file_kattr/g fs: introduce file_getattr and file_setattr syscalls fs: prepare for extending file_get/setattr() fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP selinux: implement inode_file_[g|s]etattr hooks lsm: introduce new hooks for setting/getting inode fsxattr fs: split fileattr related helpers into separate file |
||
|
Timothy Pearson
|
a2a2a6fc24 |
PCI: pnv_php: Fix surprise plug detection and recovery
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/171044224.1359864.1752615546988.JavaMail.zimbra@raptorengineeringinc.com
|
||
|
Timothy Pearson
|
1010b4c012 |
powerpc/eeh: Make EEH driver device hotplug safe
Multiple race conditions existed between the PCIe hotplug driver and the EEH driver, leading to a variety of kernel oopses of the same general nature: <pcie device unplug> <eeh driver trigger> <hotplug removal trigger> <pcie tree reconfiguration> <eeh recovery next step> <oops in EEH driver bus iteration loop> A second class of oops is also seen when the underlying bus disappears during device recovery. Refactor the EEH module to be PCI rescan and remove safe. Also clean up a few minor formatting / readability issues. Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/1334208367.1359861.1752615503144.JavaMail.zimbra@raptorengineeringinc.com |
||
|
Timothy Pearson
|
e82b34eed0 |
powerpc/eeh: Export eeh_unfreeze_pe()
The PowerNV hotplug driver needs to be able to clear any frozen PE(s) on the PHB after suprise removal of a downstream device. Export the eeh_unfreeze_pe() symbol to allow implementation of this functionality in the php_nv module. Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/1778535414.1359858.1752615454618.JavaMail.zimbra@raptorengineeringinc.com |
||
|
Thomas Weißschuh
|
4bb69d5270 |
powerpc: Don't use %pK through printk
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit
|
||
|
Jiri Bohac
|
35c18f2933 |
Add a new optional ",cma" suffix to the crashkernel= command line option
Patch series "kdump: crashkernel reservation from CMA", v5. This series implements a way to reserve additional crash kernel memory using CMA. Currently, all the memory for the crash kernel is not usable by the 1st (production) kernel. It is also unmapped so that it can't be corrupted by the fault that will eventually trigger the crash. This makes sense for the memory actually used by the kexec-loaded crash kernel image and initrd and the data prepared during the load (vmcoreinfo, ...). However, the reserved space needs to be much larger than that to provide enough run-time memory for the crash kernel and the kdump userspace. Estimating the amount of memory to reserve is difficult. Being too careful makes kdump likely to end in OOM, being too generous takes even more memory from the production system. Also, the reservation only allows reserving a single contiguous block (or two with the "low" suffix). I've seen systems where this fails because the physical memory is fragmented. By reserving additional crashkernel memory from CMA, the main crashkernel reservation can be just large enough to fit the kernel and initrd image, minimizing the memory taken away from the production system. Most of the run-time memory for the crash kernel will be memory previously available to userspace in the production system. As this memory is no longer wasted, the reservation can be done with a generous margin, making kdump more reliable. Kernel memory that we need to preserve for dumping is normally not allocated from CMA, unless it is explicitly allocated as movable. Currently this is only the case for memory ballooning and zswap. Such movable memory will be missing from the vmcore. User data is typically not dumped by makedumpfile. When dumping of user data is intended this new CMA reservation cannot be used. There are five patches in this series: The first adds a new ",cma" suffix to the recenly introduced generic crashkernel parsing code. parse_crashkernel() takes one more argument to store the cma reservation size. The second patch implements reserve_crashkernel_cma() which performs the reservation. If the requested size is not available in a single range, multiple smaller ranges will be reserved. The third patch updates Documentation/, explicitly mentioning the potential DMA corruption of the CMA-reserved memory. The fourth patch adds a short delay before booting the kdump kernel, allowing pending DMA transfers to finish. The fifth patch enables the functionality for x86 as a proof of concept. There are just three things every arch needs to do: - call reserve_crashkernel_cma() - include the CMA-reserved ranges in the physical memory map - exclude the CMA-reserved ranges from the memory available through /proc/vmcore by excluding them from the vmcoreinfo PT_LOAD ranges. Adding other architectures is easy and I can do that as soon as this series is merged. With this series applied, specifying crashkernel=100M craskhernel=1G,cma on the command line will make a standard crashkernel reservation of 100M, where kexec will load the kernel and initrd. An additional 1G will be reserved from CMA, still usable by the production system. The crash kernel will have 1.1G memory available. The 100M can be reliably predicted based on the size of the kernel and initrd. The new cma suffix is completely optional. When no crashkernel=size,cma is specified, everything works as before. This patch (of 5): Add a new cma_size parameter to parse_crashkernel(). When not NULL, call __parse_crashkernel to parse the CMA reservation size from "crashkernel=size,cma" and store it in cma_size. Set cma_size to NULL in all calls to parse_crashkernel(). Link: https://lkml.kernel.org/r/aEqnxxfLZMllMC8I@dwarf.suse.cz Link: https://lkml.kernel.org/r/aEqoQckgoTQNULnh@dwarf.suse.cz Signed-off-by: Jiri Bohac <jbohac@suse.cz> Cc: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Donald Dutile <ddutile@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Philipp Rudo <prudo@redhat.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Tao Liu <ltao@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Dave Martin
|
307035acef |
powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
Instead of having the core code guess the note name for each regset, use USER_REGSET_NOTE_TYPE() to pick the correct name from elf.h. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <kees@kernel.org> Cc: Akihiko Odaki <akihiko.odaki@daynix.com> Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp> Link: https://lore.kernel.org/r/20250701135616.29630-16-Dave.Martin@arm.com Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Peter Zijlstra
|
8f2146159b |
Merge branch 'tip/sched/urgent'
Avoid merge conflicts Signed-off-by: Peter Zijlstra <peterz@infradead.org> |
||
|
Li Chen
|
e075f43609 |
smpboot: introduce SDTL_INIT() helper to tidy sched topology setup
Define a small SDTL_INIT(maskfn, flagsfn, name) macro and use it to build the sched_domain_topology_level array. Purely a cleanup; behaviour is unchanged. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Li Chen <chenl311@chinatelecom.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20250710105715.66594-2-me@linux.beauty |
||
|
Andrey Albershteyn
|
be7efb2d20
|
fs: introduce file_getattr and file_setattr syscalls
Introduce file_getattr() and file_setattr() syscalls to manipulate inode extended attributes. The syscalls takes pair of file descriptor and pathname. Then it operates on inode opened accroding to openat() semantics. The struct file_attr is passed to obtain/change extended attributes. This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference that file don't need to be open as we can reference it with a path instead of fd. By having this we can manipulated inode extended attributes not only on regular files but also on special ones. This is not possible with FS_IOC_FSSETXATTR ioctl as with special files we can not call ioctl() directly on the filesystem inode using fd. This patch adds two new syscalls which allows userspace to get/set extended inode attributes on special files by using parent directory and a path - *at() like syscall. CC: linux-api@vger.kernel.org CC: linux-fsdevel@vger.kernel.org CC: linux-xfs@vger.kernel.org Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org> Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Greg Kroah-Hartman
|
815ac67919 |
Merge 6.16-rc4 into tty-next
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
63dafeb392 |
Merge 6.16-rc3 into driver-core-next
We need the driver-core fixes that are in 6.16-rc3 into here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Shrikanth Hegde
|
56534636c3 |
powerpc: fadump: use lock guard for mutex
use scoped_guard for scope based resource management of mutex. This would make the code simpler and easier to maintain. More details on lock guards can be found at https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com> Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250505075333.184463-4-sshegde@linux.ibm.com |
||
|
Shrikanth Hegde
|
6a21d3c5b3 |
powerpc: rtas: use lock guard for mutex
use guard(mutex) for scope based resource management of mutex. This would make the code simpler and easier to maintain. More details on lock guards can be found at https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com> Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250505075333.184463-3-sshegde@linux.ibm.com |
||
|
Shrikanth Hegde
|
77ad7ef4a2 |
powerpc: eeh: use lock guard for mutex
use guard(mutex) for scope based resource management of mutex. This would make the code simpler and easier to maintain. More details on lock guards can be found at https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com> Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250505075333.184463-2-sshegde@linux.ibm.com |
||
|
Jiri Slaby (SUSE)
|
fc9ceb501e |
serial: 8250: sanitize uart_port::serial_{in,out}() types
uart_port::{serial_in,serial_out} (and plat_serial8250_port::* likewise)
historically use:
* 'unsigned int' for 32-bit register values in reads and writes, and
* 'int' for offsets.
Make them sane such that:
* 'u32' is used for register values, and
* 'unsigned int' is used for offsets.
While at it, name hooks' parameters, so it is clear what is what.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250611100319.186924-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Jiri Slaby (SUSE)
|
33bc4874e9 |
powerpc/legacy_serial: use %pa for phys_addr_t prints
It makes the code easier to read as casts are not needed. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/20250611100319.186924-4-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jiri Slaby (SUSE)
|
2c35a83b11 |
powerpc/legacy_serial: cache serial port and info in add_legacy_port()
Caching the port and info in local variables makes the code more compact and easier to understand. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20250611100319.186924-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Thomas Weißschuh
|
fb506e31b3 |
sysfs: treewide: switch back to attribute_group::bin_attrs
The normal bin_attrs field can now handle const pointers. This makes the _new variant unnecessary. Switch all users back. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-4-724bfcf05b99@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Narayana Murty N
|
33bc69cf66 |
powerpc/eeh: Fix missing PE bridge reconfiguration during VFIO EEH recovery
VFIO EEH recovery for PCI passthrough devices fails on PowerNV and pseries
platforms due to missing host-side PE bridge reconfiguration. In the
current implementation, eeh_pe_configure() only performs RTAS or OPAL-based
bridge reconfiguration for native host devices, but skips it entirely for
PEs managed through VFIO in guest passthrough scenarios.
This leads to incomplete EEH recovery when a PCI error affects a
passthrough device assigned to a QEMU/KVM guest. Although VFIO triggers the
EEH recovery flow through VFIO_EEH_PE_ENABLE ioctl, the platform-specific
bridge reconfiguration step is silently bypassed. As a result, the PE's
config space is not fully restored, causing subsequent config space access
failures or EEH freeze-on-access errors inside the guest.
This patch fixes the issue by ensuring that eeh_pe_configure() always
invokes the platform's configure_bridge() callback (e.g.,
pseries_eeh_phb_configure_bridge) even for VFIO-managed PEs. This ensures
that RTAS or OPAL calls to reconfigure the PE bridge are correctly issued
on the host side, restoring the PE's configuration space after an EEH
event.
This fix is essential for reliable EEH recovery in QEMU/KVM guests using
VFIO PCI passthrough on PowerNV and pseries systems.
Tested with:
- QEMU/KVM guest using VFIO passthrough (IBM Power9,(lpar)Power11 host)
- Injected EEH errors with pseries EEH errinjct tool on host, recovery
verified on qemu guest.
- Verified successful config space access and CAP_EXP DevCtl restoration
after recovery
Fixes:
|
||
|
Christophe Leroy
|
b93755f408 |
powerpc/vdso: Fix build of VDSO32 with pcrel
Building vdso32 on power10 with pcrel leads to following errors:
VDSO32A arch/powerpc/kernel/vdso/gettimeofday-32.o
arch/powerpc/kernel/vdso/gettimeofday.S: Assembler messages:
arch/powerpc/kernel/vdso/gettimeofday.S:40: Error: syntax error; found `@', expected `,'
arch/powerpc/kernel/vdso/gettimeofday.S:71: Info: macro invoked from here
arch/powerpc/kernel/vdso/gettimeofday.S:40: Error: junk at end of line: `@notoc'
arch/powerpc/kernel/vdso/gettimeofday.S:71: Info: macro invoked from here
...
make[2]: *** [arch/powerpc/kernel/vdso/Makefile:85: arch/powerpc/kernel/vdso/gettimeofday-32.o] Error 1
make[1]: *** [arch/powerpc/Makefile:388: vdso_prepare] Error 2
Once the above is fixed, the following happens:
VDSO32C arch/powerpc/kernel/vdso/vgettimeofday-32.o
cc1: error: '-mpcrel' requires '-mcmodel=medium'
make[2]: *** [arch/powerpc/kernel/vdso/Makefile:89: arch/powerpc/kernel/vdso/vgettimeofday-32.o] Error 1
make[1]: *** [arch/powerpc/Makefile:388: vdso_prepare] Error 2
make: *** [Makefile:251: __sub-make] Error 2
Make sure pcrel version of CFUNC() macro is used only for powerpc64
builds and remove -mpcrel for powerpc32 builds.
Fixes:
|
||
|
Linus Torvalds
|
8630c59e99 |
Kbuild updates for v6.16
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which exports a
symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
-----BEGIN PGP SIGNATURE-----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=Dy49
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
|
||
|
Masahiro Yamada
|
e21efe833e |
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
The extra-y syntax is deprecated. Instead, use always-$(KBUILD_BUILTIN), which behaves equivalently. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Nicolas Schier <n.schier@avm.de> |
||
|
Linus Torvalds
|
3349ada3cf |
powerpc updates for 6.16
- Support for dynamic preemption - Migrate powerpc boards GPIO driver to new setter API - Added new PMU for KVM host-wide measurement - Enhancement to htmdump driver to support more functions - Added character device for couple RTAS supported APIs - Minor fixes and cleanup Thanks to: Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby (SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy, Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav Jain, Venkat Rao Bagalkote, Viktor Malik -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmgzykEACgkQpnEsdPSH ZJTEIg//a+m4lxMOO5rm6ND2nmp0/fDtC9aBpX/GNH6ZkOJX+aFH1eC0vcXX3guh N5dMc9bbOomhDMABWH7fZcs/VCMaSCd+vrg/IulpZmqrLnd+w/qlD9IKbAcQrE7y 8m/zQ+bwsq7MRVDBHRqEmvqpUVAvAqTtF7iVA5k/YptNHCDjqI8y0/YcDBOmJrsd GhbFVWFS95M5TeC4SFRfzr9Tb6GffNMqhZROeJfmzJlwigAztcfw7oNUvFbnexLI Vz3Xoflbv6oY1azdq+W9XbUcH+QCG0Ua6nVpRqutzYYFCCnUysv1EujeTGVdoR7v KDuzKSPLk6LuJRi8T/nOl2ggUD6zREJ9CE6/uRBntGBt+bl2Zb/yDr8xJ1ELHkdB TzPGy6PoJ1lxyvV9clO1TdSBuGYMV/21XK7O5MG7tCSFUCTdAOVp9wbAHOUAU7+Q 5rvW9yrNhMPcAfWV3uFY3DPVYWnDFxVmsRVL87S3vPsvQm8v63AJYWctmjvqnuQE 619F13HiS3M4HqcPupKsxV5w/1Yj2+Wz8QKg2umtdBdlSA9fmdtDpsEXh7kJJrah mVR9m28ffbEmd1pBaHoUVBT0j1pEQtXXIiKUhEdANfkBfoRIpeROq1VqLLeKos3B Dj9KgR+EOqwR0syqkV6AHAaSwqCur1r6ZSkGTA8urC/2HJ/YZC0= =dsj5 -----END PGP SIGNATURE----- Merge tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Madhavan Srinivasan: - Support for dynamic preemption - Migrate powerpc boards GPIO driver to new setter API - Added new PMU for KVM host-wide measurement - Enhancement to htmdump driver to support more functions - Added character device for couple RTAS supported APIs - Minor fixes and cleanup Thanks to Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby (SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy, Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav Jain, Venkat Rao Bagalkote, and Viktor Malik. * tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (52 commits) MAINTAINERS: powerpc: Remove myself as a reviewer powerpc/iommu: Use str_disabled_enabled() helper powerpc/powermac: Use str_enabled_disabled() and str_on_off() helpers powerpc/mm/fault: Use str_write_read() helper function powerpc: Replace strcpy() with strscpy() in proc_ppc64_init() powerpc/pseries/iommu: Fix kmemleak in TCE table userspace view powerpc/kernel: Fix ppc_save_regs inclusion in build powerpc: Transliterate author name and remove FIXME powerpc/pseries/htmdump: Include header file to get is_kvm_guest() definition KVM: PPC: Book3S HV: Fix IRQ map warnings with XICS on pSeries KVM Guest powerpc/8xx: Reduce alignment constraint for kernel memory powerpc/boot: Fix build with gcc 15 powerpc/pseries/htmdump: Add documentation for H_HTM debugfs interface powerpc/pseries/htmdump: Add htm capabilities support to htmdump module powerpc/pseries/htmdump: Add htm flags support to htmdump module powerpc/pseries/htmdump: Add htm setup support to htmdump module powerpc/pseries/htmdump: Add htm info support to htmdump module powerpc/pseries/htmdump: Add htm status support to htmdump module powerpc/pseries/htmdump: Add htm start support to htmdump module powerpc/pseries/htmdump: Add htm configure support to htmdump module ... |
||
|
Thorsten Blum
|
f15e87340a |
powerpc/iommu: Use str_disabled_enabled() helper
Remove hard-coded strings by using the str_disabled_enabled() helper. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250210224246.363318-1-thorsten.blum@linux.dev |
||
|
Thorsten Blum
|
7e99a4a60d |
powerpc: Replace strcpy() with strscpy() in proc_ppc64_init()
strcpy() is deprecated; use strscpy() instead. Don't cast the destination buffer from 'u8[]' to 'char *' to satisfy the __must_be_array() requirement of strscpy(). No functional changes intended. Link: https://github.com/KSPP/linux/issues/88 Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250421183110.436265-1-thorsten.blum@linux.dev |
||
|
Madhavan Srinivasan
|
93bd4a80ef |
powerpc/kernel: Fix ppc_save_regs inclusion in build
Recent patch fixed an old commit
'fc2a5a6161a2 ("powerpc/64s: ppc_save_regs is now needed for all 64s builds")'
which is to include building of ppc_save_reg.c only when XMON
and KEXEC_CORE and PPC_BOOK3S are enabled. This was valid, since
ppc_save_regs was called only in replay_system_reset() of old
irq.c which was under BOOK3S.
But there has been multiple refactoring of irq.c and have
added call to ppc_save_regs() from __replay_soft_interrupts
-> replay_soft_interrupts which is part of irq_64.c included
under CONFIG_PPC64. And since ppc_save_regs is called in
CRASH_DUMP path as part of crash_setup_regs in kexec.h,
CONFIG_PPC32 also needs it.
So with this recent patch which enabled the building of
ppc_save_regs.c caused a build break when none of these
(XMON, KEXEC_CORE, BOOK3S) where enabled as part of config.
Patch to enable building of ppc_save_regs.c by defaults.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250511041111.841158-1-maddy@linux.ibm.com
|
||
|
Christophe Leroy
|
b2f64cf158 |
powerpc: Don't use --- in kernel logs
When a kernel log containing --- at the start of a line is copied into a patch message, 'git am' drops everything located after that ---. Replace --- by ---- to avoid that. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/54a1f8d2c3fb5b95434039724c8c141052ae5cc0.1739346038.git.christophe.leroy@csgroup.eu |
||
|
Jiri Slaby (SUSE)
|
497b7794ae |
powerpc: do not build ppc_save_regs.o always
The Fixes commit below tried to add CONFIG_PPC_BOOK3S to one of the
conditions to enable the build of ppc_save_regs.o. But it failed to do
so, in fact. The commit omitted to add a dollar sign.
Therefore, ppc_save_regs.o is built always these days (as
"(CONFIG_PPC_BOOK3S)" is never an empty string).
Fix this by adding the missing dollar sign.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Fixes:
|
||
|
Hari Bathini
|
cb5b691f82 |
powerpc64/ftrace: fix clobbered r15 during livepatching
While r15 is clobbered always with PPC_FTRACE_OUT_OF_LINE, it is
not restored in livepatch sequence leading to not so obvious fails
like below:
BUG: Unable to handle kernel data access on write at 0xc0000000000f9078
Faulting instruction address: 0xc0000000018ff958
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP: c0000000018ff958 LR: c0000000018ff930 CTR: c0000000009c0790
REGS: c00000005f2e7790 TRAP: 0300 Tainted: G K (6.14.0+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 2822880b XER: 20040000
CFAR: c0000000008addc0 DAR: c0000000000f9078 DSISR: 0a000000 IRQMASK: 1
GPR00: c0000000018f2584 c00000005f2e7a30 c00000000280a900 c000000017ffa488
GPR04: 0000000000000008 0000000000000000 c0000000018f24fc 000000000000000d
GPR08: fffffffffffe0000 000000000000000d 0000000000000000 0000000000008000
GPR12: c0000000009c0790 c000000017ffa480 c00000005f2e7c78 c0000000000f9070
GPR16: c00000005f2e7c90 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 c00000005f3efa80 c00000005f2e7c60 c00000005f2e7c88
GPR24: c00000005f2e7c60 0000000000000001 c0000000000f9078 0000000000000000
GPR28: 00007fff97960000 c000000017ffa480 0000000000000000 c0000000000f9078
...
Call Trace:
check_heap_object+0x34/0x390 (unreliable)
__mutex_unlock_slowpath.isra.0+0xe4/0x230
seq_read_iter+0x430/0xa90
proc_reg_read_iter+0xa4/0x200
vfs_read+0x41c/0x510
ksys_read+0xa4/0x190
system_call_exception+0x1d0/0x440
system_call_vectored_common+0x15c/0x2ec
Fix it by restoring r15 always.
Fixes:
|
||
|
Haren Myneni
|
86900ab620 |
powerpc/pseries: Add a char driver for physical-attestation RTAS
The RTAS call ibm,physical-attestation is used to retrieve
information about the trusted boot state of the firmware and
hypervisor on the system, and also Trusted Platform Modules (TPM)
data if the system is TCG 2.0 compliant.
This RTAS interface expects the caller to define different command
structs such as RetrieveTPMLog, RetrievePlatformCertificat and etc,
in a work area with a maximum size of 4K bytes and the response
buffer will be returned in the same work area.
The current implementation of this RTAS function is in the user
space but allocation of the work area is restricted with the system
lockdown. So this patch implements this RTAS function in the kernel
and expose to the user space with open/ioctl/read interfaces.
PAPR (2.13+ 21.3 ibm,physical-attestation) defines RTAS function:
- Pass the command struct to obtain the response buffer for the
specific command.
- This RTAS function is sequence RTAS call and has to issue RTAS
call multiple times to get the complete response buffer (max 64K).
The hypervisor expects the first RTAS call with the sequence 1 and
the subsequent calls with the sequence number returned from the
previous calls.
Expose these interfaces to user space with a
/dev/papr-physical-attestation character device using the following
programming model:
int devfd = open("/dev/papr-physical-attestation");
int fd = ioctl(devfd, PAPR_PHY_ATTEST_IOC_HANDLE,
struct papr_phy_attest_io_block);
- The user space defines the command struct and requests the
response for any command.
- Obtain the complete response buffer and returned the buffer as
blob to the command specific FD.
size = read(fd, buf, len);
- Can retrieve the response buffer once or multiple times until the
end of BLOB buffer.
Implemented this new kernel ABI support in librtas library for
system lockdown
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-8-haren@linux.ibm.com
|
||
|
Haren Myneni
|
496c7524dc |
powerpc/pseries: Add ibm,get-dynamic-sensor-state RTAS call support
The RTAS call ibm,get-dynamic-sensor-state is used to get the
sensor state identified by the location code and the sensor
token. The librtas library provides an API
rtas_get_dynamic_sensor() which uses /dev/mem access for work
area allocation but is restricted under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_SENSOR_IOC_GET to the papr-indices character
driver which executes this HCALL and copies the sensor state
in the user specified ioctl buffer.
Refer PAPR 7.3.19 ibm,get-dynamic-sensor-state for more
information on this RTAS call.
- User input parameters to the RTAS call: location code string
and the sensor token
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_SENSOR_IOC_GET,
struct papr_indices_io_block)
- The user space specifies input parameters in
papr_indices_io_block struct
- Returned state for the specified sensor is copied to
papr_indices_io_block.dynamic_param.state
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-6-haren@linux.ibm.com
|
||
|
Haren Myneni
|
f60a3796f8 |
powerpc/pseries: Add ibm,set-dynamic-indicator RTAS call support
The RTAS call ibm,set-dynamic-indicator is used to set the new
indicator state identified by a location code. The current
implementation uses rtas_set_dynamic_indicator() API provided by
librtas library which allocates RMO buffer and issue this RTAS
call in the user space. But /dev/mem access by the user space
is prohibited under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_INDICATOR_IOC_SET to the papr-indices character
driver and expose this interface to the user space that is
compatible with lockdown.
Refer PAPR 7.3.18 ibm,set-dynamic-indicator for more
information on this RTAS call.
- User input parameters to the RTAS call: location code
string, indicator token and new state
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_INDICATOR_IOC_SET,
struct papr_indices_io_block)
- The user space passes input parameters in papr_indices_io_block
struct
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-5-haren@linux.ibm.com
|
||
|
Haren Myneni
|
6e9aec5446 |
powerpc/pseries: Add papr-indices char driver for ibm,get-indices
The RTAS call ibm,get-indices is used to obtain indices and
location codes for a specified indicator or sensor token. The
current implementation uses rtas_get_indices() API provided by
librtas library which allocates RMO buffer and issue this RTAS
call in the user space. But writable mapping /dev/mem access by
the user space is prohibited under system lockdown.
To overcome the restricted access in the user space, the kernel
provide interfaces to collect indices data from the hypervisor.
This patch adds papr-indices character driver and expose standard
interfaces such as open / ioctl/ read to user space in ways that
are compatible with lockdown.
PAPR (2.13 7.3.17 ibm,get-indices RTAS Call) describes the
following steps to retrieve all indices data:
- User input parameters to the RTAS call: sensor or indicator,
and indice type
- ibm,get-indices is sequence RTAS call which means has to issue
multiple times to get the entire list of indicators or sensors
of a particular type. The hypervisor expects the first RTAS call
with the sequence 1 and the subsequent calls with the sequence
number returned from the previous calls.
- The OS may not interleave calls to ibm,get-indices for different
indicator or sensor types. Means other RTAS calls with different
type should not be issued while the previous type sequence is in
progress. So collect the entire list of indices and copied to
buffer BLOB during ioctl() and expose this buffer to the user
space with the file descriptor.
- The hypervisor fills the work area with a specific format but
does not return the number of bytes written to the buffer.
Instead of parsing the data for each call to determine the data
length, copy the work area size (RTAS_GET_INDICES_BUF_SIZE) to
the buffer. Return work-area size of data to the user space for
each read() call.
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int devfd = open("/dev/papr-indices", O_RDONLY);
int fd = ioctl(devfd, PAPR_INDICES_IOC_GET,
struct papr_indices_io_block)
- Collect all indices data for the specified token to the buffer
char *buf = malloc(RTAS_GET_INDICES_BUF_SIZE);
length = read(fd, buf, RTAS_GET_INDICES_BUF_SIZE)
- RTAS_GET_INDICES_BUF_SIZE of data is returned to the user
space.
- The user space retrieves the indices and their location codes
from the buffer
- Should issue multiple read() calls until reaches the end of
BLOB buffer.
The read() should use the file descriptor obtained from ioctl to
get the data that is exposed to file descriptor. Implemented
support in librtas (rtas_get_indices()) for this new ABI for
system lockdown.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-4-haren@linux.ibm.com
|
||
|
Shrikanth Hegde
|
6ad7751537 |
powerpc: enable dynamic preemption
Once the lazy preemption is supported, it would be desirable to change
the preemption models at runtime. So add support for dynamic preemption
using DYNAMIC_KEY.
::Tested lightly on Power10 LPAR
Performance numbers indicate that, preempt=none(no dynamic) and
preempt=none(dynamic) are close.
cat /sys/kernel/debug/sched/preempt
(none) voluntary full lazy
perf stat -e probe:__cond_resched -a sleep 1
Performance counter stats for 'system wide':
1,253 probe:__cond_resched
echo full > /sys/kernel/debug/sched/preempt
cat /sys/kernel/debug/sched/preempt
none voluntary (full) lazy
perf stat -e probe:__cond_resched -a sleep 1
Performance counter stats for 'system wide':
0 probe:__cond_resched
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250210184334.567383-2-sshegde@linux.ibm.com
|
||
|
Thorsten Blum
|
28affd477b |
fadump: Use str_yes_no() helper in fadump_show_config()
Remove hard-coded strings by using the str_yes_no() helper function. Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250209081704.2758-2-thorsten.blum@linux.dev |
||
|
Anthony Iliopoulos
|
534f5a8ba2 |
powerpc64/ftrace: fix module loading without patchable function entries
get_stubs_size assumes that there must always be at least one patchable
function entry, which is not always the case (modules that export data
but no code), otherwise it returns -ENOEXEC and thus the section header
sh_size is set to that value. During module_memory_alloc() the size is
passed to execmem_alloc() after being page-aligned and thus set to zero
which will cause it to fail the allocation (and thus module loading) as
__vmalloc_node_range() checks for zero-sized allocs and returns null:
[ 115.466896] module_64: cast_common: doesn't contain __patchable_function_entries.
[ 115.469189] ------------[ cut here ]------------
[ 115.469496] WARNING: CPU: 0 PID: 274 at mm/vmalloc.c:3778 __vmalloc_node_range_noprof+0x8b4/0x8f0
...
[ 115.478574] ---[ end trace 0000000000000000 ]---
[ 115.479545] execmem: unable to allocate memory
Fix this by removing the check completely, since it is anyway not
helpful to propagate this as an error upwards.
Fixes:
|
||
|
Linus Torvalds
|
2cd5769fb0 |
Driver core updates for 6.15-rc1
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
|
||
|
Linus Torvalds
|
d6b02199cd |
- The 7 patch series "powerpc/crash: use generic crashkernel
reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The 2 patch series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The 4 patch series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The 12 patch series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The 16 patch series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The 7 patch series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The 2 patch series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The 4 patch series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq r6khQUIcQImPPcjFqEFpuiSOU0MBZA0= =Kii8 -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - The series "powerpc/crash: use generic crashkernel reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. * tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) mailmap: consolidate email addresses of Alexander Sverdlin fs/procfs: fix the comment above proc_pid_wchan() relay: use kasprintf() instead of fixed buffer formatting resource: replace open coded variant of DEFINE_RES() resource: replace open coded variants of DEFINE_RES_*_NAMED() resource: replace open coded variant of DEFINE_RES_NAMED_DESC() resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED() samples: add hung_task detector mutex blocking sample hung_task: show the blocker task if the task is hung on mutex kexec_core: accept unaccepted kexec segments' destination addresses watchdog/perf: optimize bytes copied and remove manual NUL-termination lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap() lib/interval_tree: skip the check before go to the right subtree lib/interval_tree: add test case for span iteration lib/interval_tree: add test case for interval_tree_iter_xxx() helpers lib/rbtree: add random seed lib/rbtree: split tests lib/rbtree: enable userland test suite for rbtree related data structure checkpatch: describe --min-conf-desc-length scripts/gdb/symbols: determine KASLR offset on s390 ... |
||
|
Linus Torvalds
|
eb0ece1602 |
- The 6 patch series "Enable strict percpu address space checks" from
Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was founf to be incorrect. - The 4 patch series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The 17 patch series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The 5 patch series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The 4 patch series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The 12 patch series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The 2 patch series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The 2 patch series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The 3 patch series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The 3 patch series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The 4 patch series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The 4 patch series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The 4 patch series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The 18 patch series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The 27 patch series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The 19 patch series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The 12 patch series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The 5 patch series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The 8 patch series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The 2 patch series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The 3 patch series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The 3 patch series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The 3 patch series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The 9 patch series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The 5 patch series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The 20 patch series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The 13 patch series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The 13 patch series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The 3 patch series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The 8 patch series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The 2 patch series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The 3 patch series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The 4 patch series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The 3 patch series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The 5 patch series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The 5 patch series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The 4 patch series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The 2 patch series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The 2 patch series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. -----BEGIN PGP SIGNATURE----- iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF Ee93qSSLR1BkNdDw+931Pu0mXfbnBw== =Pn2K -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ... |
||
|
Linus Torvalds
|
01d5b167dc |
Modules changes for 6.15-rc1
- Use RCU instead of RCU-sched
The mix of rcu_read_lock(), rcu_read_lock_sched() and preempt_disable()
in the module code and its users has been replaced with just
rcu_read_lock().
- The rest of changes are smaller fixes and updates.
The changes have been on linux-next for at least 2 weeks, with the RCU
cleanup present for 2 months. One performance problem was reported with the
RCU change when KASAN + lockdep were enabled, but it was effectively
addressed by the already merged
|
||
|
Linus Torvalds
|
7b667acd69 |
powerpc updates for 6.15
- Removal of support for IBM Cell Blades - SMP support for microwatt platform - Support for inline static calls on PPC32 - Enable pmu selftests for power11 platform - Enable hardware trace macro (HTM) hcall support - Support for limited address mode capability - Changes to RMA size from 512 MB to 768 MB to handle fadump - Misc fixes and cleanups Thanks to: Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann, Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav Jain, Venkat Rao Bagalkote. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmfjZnYACgkQpnEsdPSH ZJTmKg/+NGW7wyFY9d8Iai9ncYY7GSzsMSDTaan7qg0QWOd5gjHbsdbava7TM/DW 8p9XsC+17kSeftRNUjtc52bSN8Ei2gBdsXIagQG1alfB2X2e6wkNauifK+dz3Su6 usMEZZTO5R/jFDotFXNM1nsUj+8dvjnPgOUrji/P8k7PT5295wpza0hz1fy5SrOA hM5cliBP36UgFe5Efvgm4OUX2gQIhbc3stt9MVfymW/k0Mit5f41UIPuVGiTWowY s0cUJGkhxUlGXT3VfOVKuZfn4u9KMha7UCl9afSceJzXOdnUIKIbskui1VEv6cD/ iSIxi839uErAobFHlsLYprgYFciYLII3xe2qNZCA/ZxeIMS/Mm6xokESeWLhBnfa P7ke6l0z3GDtTvgI2eSeU9BdrVveF1NgbP9GYSKgT6gtw/kRRnxgHF8tzmLON5PT KXpQlzz8VuSBRtF2jnLFU89+FFwSA1bRUhDrp89HyYFqw1B5g4N7kFFTUJWHOuKS fwPGy+cveKehmCUBedeTRFqHvvqdwpD/WnPlQzCly3WxqdL8U/eTXYftMiAwuK28 ovLuSs3vRThKRQ8DnUa5oB0UGsjMpRV5LdvYkhw+x8mZKUR59oj4fx2ae4TtPakg dbAYuPPkCORdaSga/nV6vQgsLprFpcGX3dq6E19+BVBAY5D+1PE= =GFcj -----END PGP SIGNATURE----- Merge tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Madhavan Srinivasan: - Remove support for IBM Cell Blades - SMP support for microwatt platform - Support for inline static calls on PPC32 - Enable pmu selftests for power11 platform - Enable hardware trace macro (HTM) hcall support - Support for limited address mode capability - Changes to RMA size from 512 MB to 768 MB to handle fadump - Misc fixes and cleanups Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann, Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav Jain, and Venkat Rao Bagalkote. * tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits) powerpc/kexec: fix physical address calculation in clear_utlb_entry() crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD powerpc: Fix 'intra_function_call not a direct call' warning powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu' KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7 powerpc/microwatt: Add SMP support powerpc: Define config option for processors with broadcast TLBIE powerpc/microwatt: Define an idle power-save function powerpc/microwatt: Device-tree updates powerpc/microwatt: Select COMMON_CLK in order to get the clock framework net: toshiba: Remove reference to PPC_IBM_CELL_BLADE net: spider_net: Remove powerpc Cell driver cpufreq: ppc_cbe: Remove powerpc Cell driver genirq: Remove IRQ_EDGE_EOI_HANDLER docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR powerpc: Remove UDBG_RTAS_CONSOLE powerpc/io: Use standard barrier macros in io.c powerpc/io: Rename _insw_ns() etc. powerpc/io: Use generic raw accessors ... |
||
|
Linus Torvalds
|
317a76a996 |
Updates for the VDSO infrastructure:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance effort
and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts and
implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system timekeeping
accessors, which was good enough at the time when it was designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related to
system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
-----BEGIN PGP SIGNATURE-----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=rwei
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
|
||
|
Linus Torvalds
|
a50b4fe095 |
A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmff5jQTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoVvRD/wKtuwmiA66NJFgXC0qVq82A6fO3bY8 GBdbfysDJIbqGu5PTcULTbJ8qkqv3jeLUv6CcXvS4sZ7y/uJQl2lzf8yrD/0bbwc rLI6sHiPSZmK93kNVN4X5H7kvt7cE/DYC9nnEOgK3BY5FgKc4n9887d4aVBhL8Lv ODwVXvZ+xi351YCj7qRyPU24zt/p4tkkT1o2k4a0HBluqLI0D+V20fke9IERUL8r d1uWKlcn0TqYDesE8HXKIhbst3gx52rMJrXBJDHwFmG6v8Pj1fkTXCVpPo8QcBz8 OTVkpomN9f/Tx4+GZwhZOF86LhLL3OhxD6pT7JhFCXdmSGv+Ez8uyk1YZysM/XpV Juy/1yAcBpDIDkmhMFGdAAn48Nn9Fotty0r4je60zSEp1d/4QMXcFme29qr2JTUE iWnQ/HD6DxUjVHqy7CYvvo26Xegg1C7qgyOVt4PYZwAM1VKF5P3kzYTb4SAdxtop Tpji1sfW9QV08jqMNo6XntD32DSP9S2HqjO9LwBw700jnx2jjJ35fcJs6iodMOUn gckIZLMn3L0OoglPdyA5O7SNTbKE7aFiRKdnT/cJtR3Fa39Qu27CwC5gfiyuie9I Q+LG8GLuYSBHXAR+PBK4GWlzJ7Dn8k3eqmbnLeKpRMsU6ZzcttgA64xhaviN2wN0 iJbvLJeisXr3GA== =bYAX -----END PGP SIGNATURE----- Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide hrtimer timer cleanup hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member" * tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) wifi: rt2x00: Switch to use hrtimer_update_function() io_uring: Use helper function hrtimer_update_function() serial: xilinx_uartps: Use helper function hrtimer_update_function() ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup() RDMA: Switch to use hrtimer_setup() virtio: mem: Switch to use hrtimer_setup() drm/vmwgfx: Switch to use hrtimer_setup() drm/xe/oa: Switch to use hrtimer_setup() drm/vkms: Switch to use hrtimer_setup() drm/msm: Switch to use hrtimer_setup() drm/i915/request: Switch to use hrtimer_setup() drm/i915/uncore: Switch to use hrtimer_setup() drm/i915/pmu: Switch to use hrtimer_setup() drm/i915/perf: Switch to use hrtimer_setup() drm/i915/gvt: Switch to use hrtimer_setup() drm/i915/huc: Switch to use hrtimer_setup() drm/amdgpu: Switch to use hrtimer_setup() stm class: heartbeat: Switch to use hrtimer_setup() i2c: Switch to use hrtimer_setup() iio: Switch to use hrtimer_setup() ... |
||
|
Linus Torvalds
|
32b22538be |
Scheduler updates for v6.15:
[ Merge note, these two commits are identical:
-
|
||
|
Linus Torvalds
|
11c2b2e332 |
seccomp updates for v6.15-rc1
- avoid the lock trip seccomp_filter_release in common case (Mateusz Guzik) - remove unused 'sd' argument through-out (Oleg Nesterov) - selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64 -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ9hJKgAKCRA2KwveOeQk u3UDAQCUPSJ+iNGEsh9ErHJZWmg+LQJ999fOVrWWz+onjXFoQgD/cEHyLtSnz1Oa RbdGEqkBkRTXgOdkcIW5pJ4lBtfIpQQ= =z/8H -----END PGP SIGNATURE----- Merge tag 'seccomp-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: - avoid the lock trip seccomp_filter_release in common case (Mateusz Guzik) - remove unused 'sd' argument through-out (Oleg Nesterov) - selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64 * tag 'seccomp-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: avoid the lock trip seccomp_filter_release in common case seccomp: remove the 'sd' argument from __seccomp_filter() seccomp: remove the 'sd' argument from __secure_computing() seccomp: fix the __secure_computing() stub for !HAVE_ARCH_SECCOMP_FILTER seccomp/mips: change syscall_trace_enter() to use secure_computing() selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64 |
||
|
Linus Torvalds
|
4f773fcbdb |
execve updates for v6.15-rc1
- elf: Define and use note name macros (Akihiko Odaki) - elf: add remaining SHF_ flag macros (Timur Tabi) - binfmt: Remove loader from linux_binprm struct (Yonatan Goldschmidt) - binfmt_elf_fdpic: fix variable set but not used warning (sunliming) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ9hJxQAKCRA2KwveOeQk uwhAAP9WXP77FCfAvJkmOfDI5FSa6g2WH/BnUOtZW63lSoXnTAEAuttg8W1IKcl/ Db+R/RLS3QqrU+ib5xWBeA6ZvxZXCwA= =Svn4 -----END PGP SIGNATURE----- Merge tag 'execve-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - elf: Define and use note name macros (Akihiko Odaki) - elf: add remaining SHF_ flag macros (Timur Tabi) - binfmt: Remove loader from linux_binprm struct (Yonatan Goldschmidt) - binfmt_elf_fdpic: fix variable set but not used warning (sunliming) * tag 'execve-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt_elf_fdpic: fix variable set but not used warning elf: add remaining SHF_ flag macros binfmt: Remove loader from linux_binprm struct crash: Remove KEXEC_CORE_NOTE_NAME s390/crash: Use note name macros crash: Use note name macros powerpc/crash: Use note name macros binfmt_elf: Use note name macros elf: Define note name macros |
||
|
Mike Rapoport (Microsoft)
|
8268af309d |
arch, mm: set max_mapnr when allocating memory map for FLATMEM
max_mapnr is essentially the size of the memory map for systems that use FLATMEM. There is no reason to calculate it in each and every architecture when it's anyway calculated in alloc_node_mem_map(). Drop setting of max_mapnr from architecture code and set it once in alloc_node_mem_map(). While on it, move definition of mem_map and max_mapnr to mm/mm_init.c so there won't be two copies for MMU and !MMU variants. Link: https://lkml.kernel.org/r/20250313135003.836600-10-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86] Tested-by: Mark Brown <broonie@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Betkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Guo Ren (csky) <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Weinberger <richard@nod.at> Cc: Russel King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sebastian Andrzej Siewior
|
732ed149f7 |
powerpc: Rely on generic printing of preemption model
After the first printk in __die() there is show_regs() -> show_regs_print_info() which prints the current preemption model. Remove the preempion model from the arch code. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com> Link: https://lore.kernel.org/r/20250314160810.2373416-6-bigeasy@linutronix.de |
||
|
Sourabh Jain
|
e3185ee438 |
powerpc/crash: use generic crashkernel reservation
Commit
|
||
|
Sebastian Andrzej Siewior
|
ccf74e79ea |
powerpc/ftrace: Use RCU in all users of __module_text_address().
__module_text_address() can be invoked within a RCU section, there is no requirement to have preemption disabled. Replace the preempt_disable() section around __module_text_address() with RCU. Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-trace-kernel@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> Link: https://lore.kernel.org/r/20250108090457.512198-21-bigeasy@linutronix.de Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> |
||
|
Christophe Leroy
|
382094a41c |
powerpc: Fix 'intra_function_call not a direct call' warning
The following build warning have been reported: arch/powerpc/kvm/book3s_hv_rmhandlers.o: warning: objtool: .text+0xe84: intra_function_call not a direct call arch/powerpc/kernel/switch.o: warning: objtool: .text+0x4: intra_function_call not a direct call This happens due to commit |
||
|
Andreas Schwab
|
7e67ef889c |
powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7
Similar to the PowerMac3,1, the PowerBook6,7 is missing the #size-cells
property on the i2s node.
Depends-on: commit
|
||
|
Michael Ellerman
|
b78e0bff85 |
powerpc: Remove UDBG_RTAS_CONSOLE
The IBM Cell blade support was the last user of UDBG_RTAS_CONSOLE. Although it's still possible to build it via PPC_EARLY_DEBUG_UDBG_RTAS_CONSOLE, AFAIK it's not useful on any other platfoms, because only Cell and JS20 era machines provided the RTAS get/put-term-char functions. If anyone is using it or needs it we can always resurrect it from git. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-19-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
1b52e091e7 |
powerpc/io: Use standard barrier macros in io.c
io.c uses open-coded barriers. Update it to use the equivalent but in macro form. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-18-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
76c7d4300d |
powerpc/io: Rename _insw_ns() etc.
The "_ns" suffix was "historical" in 2006, finally remove it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-17-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
6584845b3d |
powerpc/io: Remove PPC_INDIRECT_MMIO
The Cell blade support was the last user of PPC_INDIRECT_MMIO, so it can now be removed. PPC_INDIRECT_PIO is still used by Power8 powernv, so it needs to remain. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-10-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
478e1709ad |
powerpc/io: Remove PPC_IO_WORKAROUNDS
The Cell blade support was the last user of PPC_IO_WORKAROUNDS, so they can now be removed. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-9-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
f026dffd54 |
powerpc: Remove PPC_OF_PLATFORM_PCI
The Cell blade support was the last user of PPC_OF_PLATFORM_PCI, so remove it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-8-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
8e4f1a3495 |
powerpc: Remove some Cell leftovers
Now that CONFIG_PPC_CELL_NATIVE is removed, iommu_fixed_is_weak will always be false, so remove it entirely. Also remove a hack/quirk in the HTAB code that was only used on Cell. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-2-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
05bf59fbee |
powerpc/cell: Remove support for IBM Cell Blades
IBM Cell Blades used the Cell processor and the "blade" server form factor. They were sold as models QS20, QS21 & QS22 from roughly 2006 to 2012 [1]. They were used in a few supercomputers (eg. Roadrunner) that have since been dismantled, and were not that widely used otherwise. Until recently I still had a working QS22, which meant I was able to keep the platform support working, but unfortunately that machine has now died. I'm not aware of any users. If there is a user that wants to keep the upstream support working, we can look at bringing some of the code back as appropriate. See previous discussion at [2]. Remove the top-level config symbol PPC_IBM_CELL_BLADE, and then the dependent symbols PPC_CELL_NATIVE, PPC_CELL_COMMON, CBE_RAS, PPC_IBM_CELL_RESETBUTTON, PPC_IBM_CELL_POWERBUTTON, CBE_THERM, and AXON_MSI. Then remove the associated C files and headers, and trim unused header content (some is shared with PS3). Note that PPC_CELL_COMMON sounds like it would build code shared with PS3, but it does not. It's a relic from when code was shared between the Blade support and QPACE support. Most of the primary authors already have CREDITS entries, with the exception of Christian, so add one for him. [1]: https://www.theregister.com/2011/06/28/ibm_kills_qs22_blade [2]: https://lore.kernel.org/linuxppc-dev/60581044-df82-40ad-b94c-56468007a93e@app.fastmail.com Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-1-mpe@ellerman.id.au |
||
|
Christophe Leroy
|
f50b45626e |
powerpc/static_call: Implement inline static calls
Implement inline static calls:
- Put a 'bl' to the destination function ('b' if tail call)
- Put a 'nop' when the destination function is NULL ('blr' if tail call)
- Put a 'li r3,0' when the destination is the RET0 function and not
a tail call.
If the destination is too far (over the 32Mb limit), go via the
trampoline.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/3dbd0b2ba577c942729235d0211d04a406653d81.1733245362.git.christophe.leroy@csgroup.eu
|
||
|
Christophe Leroy
|
6626f98ed5 |
powerpc: Prepare arch_static_call_transform() for supporting inline static calls
Reorganise arch_static_call_transform() in order to ease the support of inline static calls in following patch: - remove 'target' to nhide whether it is a 'return 0' or not. - Don't bail out if 'tramp' is NULL, just do nothing until next patch. Note that 'target' was 'tramp + PPC_SCT_RET0', is_short was perforce true. So in the 'if (func && !is_short)' leg, target was perforce equal to 'func'. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/7a8b9245e773307c315c2548a4c6cad570ac2648.1733245362.git.christophe.leroy@csgroup.eu |
||
|
Christophe Leroy
|
f17bcb97ed |
powerpc/time: Define div128_by_32() static and __init
div128_by_32() used to be called from outside time.c in the old days but since v2.6.15 it hasn't been used outside time.c $ git grep div128_by_32 v2.6.14 v2.6.14:arch/ppc64/kernel/iSeries_setup.c: div128_by_32(1024 * 1024, 0, tb_ticks_per_sec, &divres); v2.6.14:arch/ppc64/kernel/pmac_time.c: div128_by_32( 1024*1024, 0, tb_ticks_per_sec, &divres ); v2.6.14:arch/ppc64/kernel/time.c: div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres ); v2.6.14:arch/ppc64/kernel/time.c: div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); v2.6.14:arch/ppc64/kernel/time.c: div128_by_32(1000000000, 0, tb_ticks_per_sec, &res); v2.6.14:arch/ppc64/kernel/time.c: div128_by_32( 1024*1024, 0, new_tb_ticks_per_sec, &divres ); v2.6.14:arch/ppc64/kernel/time.c:void div128_by_32( unsigned long dividend_high, unsigned long dividend_low, v2.6.14:include/asm-ppc64/time.h:void div128_by_32( unsigned long dividend_high, unsigned long dividend_low, $ git grep div128_by_32 v2.6.15 v2.6.15:arch/powerpc/kernel/time.c: div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres ); v2.6.15:arch/powerpc/kernel/time.c: div128_by_32(1024*1024, 0, tb_ticks_per_sec, &res); v2.6.15:arch/powerpc/kernel/time.c: div128_by_32(1000000000, 0, tb_ticks_per_sec, &res); v2.6.15:arch/powerpc/kernel/time.c: div128_by_32(1024*1024, 0, new_tb_ticks_per_sec, &divres); v2.6.15:arch/powerpc/kernel/time.c:void div128_by_32(u64 dividend_high, u64 dividend_low, v2.6.15:include/asm-powerpc/time.h:extern void div128_by_32(u64 dividend_high, u64 dividend_low, Move it above its only caller which is time_init() and define it static and __init. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/50810349bf1eee378fbeab72a36e4b6553a60c3d.1738749246.git.christophe.leroy@csgroup.eu |
||
|
Christophe Leroy
|
2c1cbbab62 |
powerpc/vmlinux: Remove etext, edata and end
etext is not used anymore since commit
|
||
|
Thomas Weißschuh
|
223970df2b |
powerpc/vdso: Switch to generic storage implementation
The generic storage implementation provides the same features as the custom one. However it can be shared between architectures, making maintenance easier. Co-developed-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-14-13a4669dfc8c@linutronix.de |
||
|
Thomas Weißschuh
|
127b0e05c1 |
vdso: Rename included Makefile
As the Makefile is included into other Makefiles it can not be used to define objects to be built from the current source directory. However the generic datastore will introduce such a local source file. Rename the included Makefile so it is clear how it is to be used and to make room for a regular Makefile in lib/vdso/. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-4-13a4669dfc8c@linutronix.de |
||
|
Thomas Weißschuh
|
982d13db10 |
powerpc/secvar: Constify 'struct bin_attribute'
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-powerpc-v1-2-bbed8906f476@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Thomas Weißschuh
|
10f10210f6 |
powerpc/secvar: Mark __init functions as such
The setup functions are only called during the init phase of the kernel. They can be discarded and their memory reused after that. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-powerpc-v1-1-bbed8906f476@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Nam Cao
|
d1f0d81b36 |
powerpc/watchdog: Switch to use hrtimer_setup()
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Patch was created by using Coccinelle. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/099ebf6d352094a56e22fdfe76582b50f8fd6029.1738746821.git.namcao@linutronix.de |
||
|
Christian Brauner
|
c4a16820d9
|
fs: add open_tree_attr()
Add open_tree_attr() which allow to atomically create a detached mount tree and set mount options on it. If OPEN_TREE_CLONE is used this will allow the creation of a detached mount with a new set of mount options without it ever being exposed to userspace without that set of mount options applied. Link: https://lore.kernel.org/r/20250128-work-mnt_idmap-update-v2-v1-3-c25feb0d2eb3@kernel.org Reviewed-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Sourabh Jain
|
b7bb460624 |
powerpc/fadump: fix additional param memory reservation for HASH MMU
Commit
|
||
|
Sourabh Jain
|
0bdd7ff5b8 |
powerpc: export MIN RMA size
Commit
|
||
|
Akihiko Odaki
|
609c8b3091 |
powerpc/crash: Use note name macros
Use note name macros to match with the userspace's expectation. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Acked-by: Baoquan He <bhe@redhat.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://lore.kernel.org/r/20250115-elf-v5-3-0f9e55bbb2fc@daynix.com Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Oleg Nesterov
|
1027cd8084 |
seccomp: remove the 'sd' argument from __secure_computing()
After the previous changes 'sd' is always NULL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20250128150313.GA15336@redhat.com Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Linus Torvalds
|
fd8c09ad0d |
Kbuild updates for v6.14
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
-----BEGIN PGP SIGNATURE-----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=D553
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
* tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (64 commits)
kbuild: fix Clang LTO with CONFIG_OBJTOOL=n
kbuild: Strip runtime const RELA sections correctly
kconfig: fix memory leak in sym_warn_unmet_dep()
kconfig: fix file name in warnings when loading KCONFIG_DEFCONFIG_LIST
genksyms: fix syntax error for attribute before init-declarator
genksyms: fix syntax error for builtin (u)int*x*_t types
genksyms: fix syntax error for attribute after 'union'
genksyms: fix syntax error for attribute after 'struct'
genksyms: fix syntax error for attribute after abstact_declarator
genksyms: fix syntax error for attribute before nested_declarator
genksyms: fix syntax error for attribute before abstract_declarator
genksyms: decouple ATTRIBUTE_PHRASE from type-qualifier
genksyms: record attributes consistently for init-declarator
genksyms: restrict direct-declarator to take one parameter-type-list
genksyms: restrict direct-abstract-declarator to take one parameter-type-list
genksyms: remove Makefile hack
genksyms: fix last 3 shift/reduce conflicts
genksyms: fix 6 shift/reduce conflicts and 5 reduce/reduce conflicts
genksyms: reduce type_qualifier directly to decl_specifier
genksyms: rename cvar_qualifier to type_qualifier
...
|
||
|
Joel Granados
|
1751f872cc |
treewide: const qualify ctl_tables where applicable
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit
|
||
|
Linus Torvalds
|
9c5968db9e |
The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs. - "Allocate and free frozen pages" from Matthew Wilcox reorganizes the page allocator so we end up with the ability to allocate and free zero-refcount pages. So that callers (ie, slab) can avoid a refcount inc & dec. - "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use large folios other than PMD-sized ones. - "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and fixes for this small built-in kernel selftest. - "mas_anode_descend() related cleanup" from Wei Yang tidies up part of the mapletree code. - "mm: fix format issues and param types" from Keren Sun implements a few minor code cleanups. - "simplify split calculation" from Wei Yang provides a few fixes and a test for the mapletree code. - "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes continues the work of moving vma-related code into the (relatively) new mm/vma.c. - "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David Hildenbrand cleans up and rationalizes handling of gfp flags in the page allocator. - "readahead: Reintroduce fix for improper RA window sizing" from Jan Kara is a second attempt at fixing a readahead window sizing issue. It should reduce the amount of unnecessary reading. - "synchronously scan and reclaim empty user PTE pages" from Qi Zheng addresses an issue where "huge" amounts of pte pagetables are accumulated (https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/). Qi's series addresses this windup by synchronously freeing PTE memory within the context of madvise(MADV_DONTNEED). - "selftest/mm: Remove warnings found by adding compiler flags" from Muhammad Usama Anjum fixes some build warnings in the selftests code when optional compiler warnings are enabled. - "mm: don't use __GFP_HARDWALL when migrating remote pages" from David Hildenbrand tightens the allocator's observance of __GFP_HARDWALL. - "pkeys kselftests improvements" from Kevin Brodsky implements various fixes and cleanups in the MM selftests code, mainly pertaining to the pkeys tests. - "mm/damon: add sample modules" from SeongJae Park enhances DAMON to estimate application working set size. - "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn provides some cleanups to memcg's hugetlb charging logic. - "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based kernel build was demonstrated. - "zram: split page type read/write handling" from Sergey Senozhatsky has several fixes and cleaups for zram in the area of zram_write_page(). A watchdog softlockup warning was eliminated. - "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky cleans up the pagetable destructor implementations. A rare use-after-free race is fixed. - "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes simplifies and cleans up the debugging code in the VMA merging logic. - "Account page tables at all levels" from Kevin Brodsky cleans up and regularizes the pagetable ctor/dtor handling. This results in improvements in accounting accuracy. - "mm/damon: replace most damon_callback usages in sysfs with new core functions" from SeongJae Park cleans up and generalizes DAMON's sysfs file interface logic. - "mm/damon: enable page level properties based monitoring" from SeongJae Park increases the amount of information which is presented in response to DAMOS actions. - "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs is completed. - "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter Xu cleans up and generalizes the hugetlb reservation accounting. - "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino removes a never-used feature of the alloc_pages_bulk() interface. - "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park extends DAMOS filters to support not only exclusion (rejecting), but also inclusion (allowing) behavior. - "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi "introduces a new memory descriptor for zswap.zpool that currently overlaps with struct page for now. This is part of the effort to reduce the size of struct page and to enable dynamic allocation of memory descriptors." - "mm, swap: rework of swap allocator locks" from Kairui Song redoes and simplifies the swap allocator locking. A speedup of 400% was demonstrated for one workload. As was a 35% reduction for kernel build time with swap-on-zram. - "mm: update mips to use do_mmap(), make mmap_region() internal" from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that mmap_region() can be made MM-internal. - "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU regressions and otherwise improves MGLRU performance. - "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park updates DAMON documentation. - "Cleanup for memfd_create()" from Isaac Manjarres does that thing. - "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand provides various cleanups in the areas of hugetlb folios, THP folios and migration. - "Uncached buffered IO" from Jens Axboe implements the new RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache reading and writing. To permite userspace to address issues with massive buildup of useless pagecache when reading/writing fast devices. - "selftests/mm: virtual_address_range: Reduce memory" from Thomas Weißschuh fixes and optimizes some of the MM selftests. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5a+cwAKCRDdBJ7gKXxA jtoyAP9R58oaOKPJuTizEKKXvh/RpMyD6sYcz/uPpnf+cKTZxQEAqfVznfWlw/Lz uC3KRZYhmd5YrxU4o+qjbzp9XWX/xAE= =Ib2s -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "The various patchsets are summarized below. Plus of course many indivudual patches which are described in their changelogs. - "Allocate and free frozen pages" from Matthew Wilcox reorganizes the page allocator so we end up with the ability to allocate and free zero-refcount pages. So that callers (ie, slab) can avoid a refcount inc & dec - "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use large folios other than PMD-sized ones - "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and fixes for this small built-in kernel selftest - "mas_anode_descend() related cleanup" from Wei Yang tidies up part of the mapletree code - "mm: fix format issues and param types" from Keren Sun implements a few minor code cleanups - "simplify split calculation" from Wei Yang provides a few fixes and a test for the mapletree code - "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes continues the work of moving vma-related code into the (relatively) new mm/vma.c - "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David Hildenbrand cleans up and rationalizes handling of gfp flags in the page allocator - "readahead: Reintroduce fix for improper RA window sizing" from Jan Kara is a second attempt at fixing a readahead window sizing issue. It should reduce the amount of unnecessary reading - "synchronously scan and reclaim empty user PTE pages" from Qi Zheng addresses an issue where "huge" amounts of pte pagetables are accumulated: https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/ Qi's series addresses this windup by synchronously freeing PTE memory within the context of madvise(MADV_DONTNEED) - "selftest/mm: Remove warnings found by adding compiler flags" from Muhammad Usama Anjum fixes some build warnings in the selftests code when optional compiler warnings are enabled - "mm: don't use __GFP_HARDWALL when migrating remote pages" from David Hildenbrand tightens the allocator's observance of __GFP_HARDWALL - "pkeys kselftests improvements" from Kevin Brodsky implements various fixes and cleanups in the MM selftests code, mainly pertaining to the pkeys tests - "mm/damon: add sample modules" from SeongJae Park enhances DAMON to estimate application working set size - "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn provides some cleanups to memcg's hugetlb charging logic - "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based kernel build was demonstrated - "zram: split page type read/write handling" from Sergey Senozhatsky has several fixes and cleaups for zram in the area of zram_write_page(). A watchdog softlockup warning was eliminated - "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky cleans up the pagetable destructor implementations. A rare use-after-free race is fixed - "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes simplifies and cleans up the debugging code in the VMA merging logic - "Account page tables at all levels" from Kevin Brodsky cleans up and regularizes the pagetable ctor/dtor handling. This results in improvements in accounting accuracy - "mm/damon: replace most damon_callback usages in sysfs with new core functions" from SeongJae Park cleans up and generalizes DAMON's sysfs file interface logic - "mm/damon: enable page level properties based monitoring" from SeongJae Park increases the amount of information which is presented in response to DAMOS actions - "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs is completed - "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter Xu cleans up and generalizes the hugetlb reservation accounting - "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino removes a never-used feature of the alloc_pages_bulk() interface - "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park extends DAMOS filters to support not only exclusion (rejecting), but also inclusion (allowing) behavior - "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi introduces a new memory descriptor for zswap.zpool that currently overlaps with struct page for now. This is part of the effort to reduce the size of struct page and to enable dynamic allocation of memory descriptors - "mm, swap: rework of swap allocator locks" from Kairui Song redoes and simplifies the swap allocator locking. A speedup of 400% was demonstrated for one workload. As was a 35% reduction for kernel build time with swap-on-zram - "mm: update mips to use do_mmap(), make mmap_region() internal" from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that mmap_region() can be made MM-internal - "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU regressions and otherwise improves MGLRU performance - "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park updates DAMON documentation - "Cleanup for memfd_create()" from Isaac Manjarres does that thing - "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand provides various cleanups in the areas of hugetlb folios, THP folios and migration - "Uncached buffered IO" from Jens Axboe implements the new RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache reading and writing. To permite userspace to address issues with massive buildup of useless pagecache when reading/writing fast devices - "selftests/mm: virtual_address_range: Reduce memory" from Thomas Weißschuh fixes and optimizes some of the MM selftests" * tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits) mm/compaction: fix UBSAN shift-out-of-bounds warning s390/mm: add missing ctor/dtor on page table upgrade kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() tools: add VM_WARN_ON_VMG definition mm/damon/core: use str_high_low() helper in damos_wmark_wait_us() seqlock: add missing parameter documentation for raw_seqcount_try_begin() mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh mm/page_alloc: remove the incorrect and misleading comment zram: remove zcomp_stream_put() from write_incompressible_page() mm: separate move/undo parts from migrate_pages_batch() mm/kfence: use str_write_read() helper in get_access_type() selftests/mm/mkdirty: fix memory leak in test_uffdio_copy() kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags() selftests/mm: virtual_address_range: avoid reading from VM_IO mappings selftests/mm: vm_util: split up /proc/self/smaps parsing selftests/mm: virtual_address_range: unmap chunks after validation selftests/mm: virtual_address_range: mmap() without PROT_WRITE selftests/memfd/memfd_test: fix possible NULL pointer dereference mm: add FGP_DONTCACHE folio creation flag mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue ... |
||
|
Guo Weikang
|
c6f239796b |
mm/memblock: add memblock_alloc_or_panic interface
Before SLUB initialization, various subsystems used memblock_alloc to allocate memory. In most cases, when memory allocation fails, an immediate panic is required. To simplify this behavior and reduce repetitive checks, introduce `memblock_alloc_or_panic`. This function ensures that memory allocation failures result in a panic automatically, improving code readability and consistency across subsystems that require this behavior. [guoweikang.kernel@gmail.com: arch/s390: save_area_alloc default failure behavior changed to panic] Link: https://lkml.kernel.org/r/20250109033136.2845676-1-guoweikang.kernel@gmail.com Link: https://lore.kernel.org/lkml/Z2fknmnNtiZbCc7x@kernel.org/ Link: https://lkml.kernel.org/r/20250102072528.650926-1-guoweikang.kernel@gmail.com Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390] Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
2e04247f7c |
ftrace updates for v6.14:
- Have fprobes built on top of function graph infrastructure The fprobe logic is an optimized kprobe that uses ftrace to attach to functions when a probe is needed at the start or end of the function. The fprobe and kretprobe logic implements a similar method as the function graph tracer to trace the end of the function. That is to hijack the return address and jump to a trampoline to do the trace when the function exits. To do this, a shadow stack needs to be created to store the original return address. Fprobes and function graph do this slightly differently. Fprobes (and kretprobes) has slots per callsite that are reserved to save the return address. This is fine when just a few points are traced. But users of fprobes, such as BPF programs, are starting to add many more locations, and this method does not scale. The function graph tracer was created to trace all functions in the kernel. In order to do this, when function graph tracing is started, every task gets its own shadow stack to hold the return address that is going to be traced. The function graph tracer has been updated to allow multiple users to use its infrastructure. Now have fprobes be one of those users. This will also allow for the fprobe and kretprobe methods to trace the return address to become obsolete. With new technologies like CFI that need to know about these methods of hijacking the return address, going toward a solution that has only one method of doing this will make the kernel less complex. - Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Remove disabling of interrupts in the function graph tracer When function graph tracer was first introduced, it could race with interrupts and NMIs. To prevent that race, it would disable interrupts and not trace NMIs. But the code has changed to allow NMIs and also interrupts. This change was done a long time ago, but the disabling of interrupts was never removed. Remove the disabling of interrupts in the function graph tracer is it is not needed. This greatly improves its performance. - Allow the :mod: command to enable tracing module functions on the kernel command line. The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Because enabling function tracing can be done very early at boot up (before scheduling is enabled), the commands that can be done when function tracing is started is limited. Having the ":mod:" command to trace module functions as they are loaded is very useful. Update the kernel command line function filtering to allow it. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ42E2RQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qqXSAPwOMxuhye8tb1GYG62QD9+w7e6nOmlC 2GCPj4detnEM2QD/ciivkhespVKhHpZHRewAuSnJgHPSM45NQ3EVESzjWQ4= =snbx -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Have fprobes built on top of function graph infrastructure The fprobe logic is an optimized kprobe that uses ftrace to attach to functions when a probe is needed at the start or end of the function. The fprobe and kretprobe logic implements a similar method as the function graph tracer to trace the end of the function. That is to hijack the return address and jump to a trampoline to do the trace when the function exits. To do this, a shadow stack needs to be created to store the original return address. Fprobes and function graph do this slightly differently. Fprobes (and kretprobes) has slots per callsite that are reserved to save the return address. This is fine when just a few points are traced. But users of fprobes, such as BPF programs, are starting to add many more locations, and this method does not scale. The function graph tracer was created to trace all functions in the kernel. In order to do this, when function graph tracing is started, every task gets its own shadow stack to hold the return address that is going to be traced. The function graph tracer has been updated to allow multiple users to use its infrastructure. Now have fprobes be one of those users. This will also allow for the fprobe and kretprobe methods to trace the return address to become obsolete. With new technologies like CFI that need to know about these methods of hijacking the return address, going toward a solution that has only one method of doing this will make the kernel less complex. - Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Remove disabling of interrupts in the function graph tracer When function graph tracer was first introduced, it could race with interrupts and NMIs. To prevent that race, it would disable interrupts and not trace NMIs. But the code has changed to allow NMIs and also interrupts. This change was done a long time ago, but the disabling of interrupts was never removed. Remove the disabling of interrupts in the function graph tracer is it is not needed. This greatly improves its performance. - Allow the :mod: command to enable tracing module functions on the kernel command line. The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Because enabling function tracing can be done very early at boot up (before scheduling is enabled), the commands that can be done when function tracing is started is limited. Having the ":mod:" command to trace module functions as they are loaded is very useful. Update the kernel command line function filtering to allow it. * tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits) ftrace: Implement :mod: cache filtering on kernel command line tracing: Adopt __free() and guard() for trace_fprobe.c bpf: Use ftrace_get_symaddr() for kprobe_multi probes ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr Documentation: probes: Update fprobe on function-graph tracer selftests/ftrace: Add a test case for repeating register/unregister fprobe selftests: ftrace: Remove obsolate maxactive syntax check tracing/fprobe: Remove nr_maxactive from fprobe fprobe: Add fprobe_header encoding feature fprobe: Rewrite fprobe on function-graph tracer s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS tracing: Add ftrace_fill_perf_regs() for perf event tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs fprobe: Use ftrace_regs in fprobe exit handler fprobe: Use ftrace_regs in fprobe entry handler fgraph: Pass ftrace_regs to retfunc fgraph: Replace fgraph_ret_regs with ftrace_regs ... |
||
|
Michael Ellerman
|
200f22fa48 |
powerpc/prom_init: Use IS_ENABLED()
Use IS_ENABLED() for the device tree checks, so that more code is checked by the compiler without having to build all the different configurations. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218113159.422821-1-mpe@ellerman.id.au |
||
|
Gaurav Batra
|
8f70caad82 |
powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW
Power Hypervisor can possibily allocate MMIO window intersecting with
Dynamic DMA Window (DDW) range, which is over 32-bit addressing.
These MMIO pages needs to be marked as reserved so that IOMMU doesn't map
DMA buffers in this range.
The current code is not marking these pages correctly which is resulting
in LPAR to OOPS while booting. The stack is at below
BUG: Unable to handle kernel data access on read at 0xc00800005cd40000
Faulting instruction address: 0xc00000000005cdac
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: af_packet rfkill ibmveth(X) lpfc(+) nvmet_fc nvmet nvme_keyring crct10dif_vpmsum nvme_fc nvme_fabrics nvme_core be2net(+) nvme_auth rtc_generic nfsd auth_rpcgss nfs_acl lockd grace sunrpc fuse configfs ip_tables x_tables xfs libcrc32c dm_service_time ibmvfc(X) scsi_transport_fc vmx_crypto gf128mul crc32c_vpmsum dm_mirror dm_region_hash dm_log dm_multipath dm_mod sd_mod scsi_dh_emc scsi_dh_rdac scsi_dh_alua t10_pi crc64_rocksoft_generic crc64_rocksoft sg crc64 scsi_mod
Supported: Yes, External
CPU: 8 PID: 241 Comm: kworker/8:1 Kdump: loaded Not tainted 6.4.0-150600.23.14-default #1 SLE15-SP6 b44ee71c81261b9e4bab5e0cde1f2ed891d5359b
Hardware name: IBM,9080-M9S POWER9 (raw) 0x4e2103 0xf000005 of:IBM,FW950.B0 (VH950_149) hv:phyp pSeries
Workqueue: events work_for_cpu_fn
NIP: c00000000005cdac LR: c00000000005e830 CTR: 0000000000000000
REGS: c00001400c9ff770 TRAP: 0300 Not tainted (6.4.0-150600.23.14-default)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24228448 XER: 00000001
CFAR: c00000000005cdd4 DAR: c00800005cd40000 DSISR: 40000000 IRQMASK: 0
GPR00: c00000000005e830 c00001400c9ffa10 c000000001987d00 c00001400c4fe800
GPR04: 0000080000000000 0000000000000001 0000000004000000 0000000000800000
GPR08: 0000000004000000 0000000000000001 c00800005cd40000 ffffffffffffffff
GPR12: 0000000084228882 c00000000a4c4f00 0000000000000010 0000080000000000
GPR16: c00001400c4fe800 0000000004000000 0800000000000000 c00000006088b800
GPR20: c00001401a7be980 c00001400eff3800 c000000002a2da68 000000000000002b
GPR24: c0000000026793a8 c000000002679368 000000000000002a c0000000026793c8
GPR28: 000008007effffff 0000080000000000 0000000000800000 c00001400c4fe800
NIP [c00000000005cdac] iommu_table_reserve_pages+0xac/0x100
LR [c00000000005e830] iommu_init_table+0x80/0x1e0
Call Trace:
[c00001400c9ffa10] [c00000000005e810] iommu_init_table+0x60/0x1e0 (unreliable)
[c00001400c9ffa90] [c00000000010356c] iommu_bypass_supported_pSeriesLP+0x9cc/0xe40
[c00001400c9ffc30] [c00000000005c300] dma_iommu_dma_supported+0xf0/0x230
[c00001400c9ffcb0] [c00000000024b0c4] dma_supported+0x44/0x90
[c00001400c9ffcd0] [c00000000024b14c] dma_set_mask+0x3c/0x80
[c00001400c9ffd00] [c0080000555b715c] be_probe+0xc4/0xb90 [be2net]
[c00001400c9ffdc0] [c000000000986f3c] local_pci_probe+0x6c/0x110
[c00001400c9ffe40] [c000000000188f28] work_for_cpu_fn+0x38/0x60
[c00001400c9ffe70] [c00000000018e454] process_one_work+0x314/0x620
[c00001400c9fff10] [c00000000018f280] worker_thread+0x2b0/0x620
[c00001400c9fff90] [c00000000019bb18] kthread+0x148/0x150
[c00001400c9fffe0] [c00000000000ded8] start_kernel_thread+0x14/0x18
There are 2 issues in the code
1. The index is "int" while the address is "unsigned long". This results in
negative value when setting the bitmap.
2. The DMA offset is page shifted but the MMIO range is used as-is (64-bit
address). MMIO address needs to be page shifted as well.
Fixes:
|
||
|
Matthew Maurer
|
54ac1ac8ed |
modules: Support extended MODVERSIONS info
Adds a new format for MODVERSIONS which stores each field in a separate ELF section. This initially adds support for variable length names, but could later be used to add additional fields to MODVERSIONS in a backwards compatible way if needed. Any new fields will be ignored by old user tooling, unlike the current format where user tooling cannot tolerate adjustments to the format (for example making the name field longer). Since PPC munges its version records to strip leading dots, we reproduce the munging for the new format. Other architectures do not appear to have architecture-specific usage of this information. Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Matthew Maurer <mmaurer@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Masami Hiramatsu (Google)
|
41705c4262 |
fgraph: Pass ftrace_regs to entryfunc
Pass ftrace_regs to the fgraph_ops::entryfunc(). If ftrace_regs is not available, it passes a NULL instead. User callback function can access some registers (including return address) via this ftrace_regs. Note that the ftrace_regs can be NULL when the arch does NOT define: HAVE_DYNAMIC_FTRACE_WITH_ARGS or HAVE_DYNAMIC_FTRACE_WITH_REGS. More specifically, if HAVE_DYNAMIC_FTRACE_WITH_REGS is defined but not the HAVE_DYNAMIC_FTRACE_WITH_ARGS, and the ftrace ops used to register the function callback does not set FTRACE_OPS_FL_SAVE_REGS. In this case, ftrace_regs can be NULL in user callback. Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Florent Revest <revest@chromium.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: bpf <bpf@vger.kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Naveen N Rao <naveen@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/173518990044.391279.17406984900626078579.stgit@devnote2 Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu (Google)
|
d576aec24d |
fgraph: Get ftrace recursion lock in function_graph_enter
Get the ftrace recursion lock in the generic function_graph_enter() instead of each architecture code. This changes all function_graph tracer callbacks running in non-preemptive state. On x86 and powerpc, this is by default, but on the other architecutres, this will be new. Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Florent Revest <revest@chromium.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: bpf <bpf@vger.kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Naveen N Rao <naveen@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/173379653720.973433.18438622234884980494.stgit@devnote2 Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Thorsten Blum
|
26bef359bc |
powerpc: Use str_on_off() helper in check_cache_coherency()
Remove hard-coded strings by using the str_on_off() helper function. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241220191705.1446-2-thorsten.blum@linux.dev |
||
|
Shrikanth Hegde
|
00199ed6f2 |
powerpc: Add preempt lazy support
Define preempt lazy bit for Powerpc. Use bit 9 which is free and within 16 bit range of NEED_RESCHED, so compiler can issue single andi. Since Powerpc doesn't use the generic entry/exit, add lazy check at exit to user. CONFIG_PREEMPTION is defined for lazy/full/rt so use it for return to kernel. Ran a few benchmarks and db workload on Power10. Performance is close to preempt=none/voluntary. Since Powerpc systems can have large core count and large memory, preempt lazy is going to be helpful in avoiding soft lockup issues. Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Ankur Arora <ankur.a.arora@oracle.com> Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241116192306.88217-2-sshegde@linux.ibm.com |
||
|
Christophe Leroy
|
9fa9712644 |
powerpc/vdso: Mark the vDSO code read-only after init
VDSO text is fixed-up during init so it can't be const, but it can be read-only after init. Do the same as x86 in commit |
||
|
Michael Ellerman
|
f66dbe4379 |
powerpc/64: Use get_user() in start_thread()
For ELFv1 binaries (big endian), the ELF entry point isn't the address of the first instruction, instead it points to the function descriptor for the entry point. The address of the first instruction is in the function descriptor. That means the kernel has to fetch the address of the first instruction from user memory. Because start_thread() uses __get_user(), which has no access_ok() checks, it looks like a malicious ELF binary could be crafted to point the entry point address at kernel memory. The kernel would load 8 bytes from kernel memory into the NIP and then start the process, it would typically crash, but a debugger could observe the NIP value which would be the result of reading from kernel memory. However that's NOT possible, because there is a check in load_elf_binary() that ensures the ELF entry point is < TASK_SIZE (look for BAD_ADDR(elf_entry)). However it's fragile for start_thread() to rely on a check elsewhere, even if the ELF parser is unlikely to ever drop the check that elf_entry is a user address. Make it more robust by using get_user(), which checks that the address points at userspace before doing the load. If the address doesn't point at userspace it will just set the result to zero, and the userspace program will crash at zero (which is fine because it's self-inflicted). Note that it's also possible for a malicious binary to have a valid ELF entry address, but with the first instruction address pointing into the kernel. However that's OK, because it is blocked by the MMU, just like any other attempt to jump into the kernel from userspace. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241216121706.26790-1-mpe@ellerman.id.au |
||
|
Christophe Leroy
|
2a17a5bebc |
powerpc/32: Replace mulhdu() by mul_u64_u64_shr()
Using mul_u64_u64_shr() provides similar calculation as mulhdu() assembly function, but enables inlining by the compiler. The home-made assembly function had special handling for when one of the arguments is not a fully populated u64 but time functions use it to multiply timebase by a calculated scale which is constructed to have most significant bit set. On mpc8xx sched_clock() runs 3% faster. On mpc83xx it is 2%. As you can see below, sched_clock() is not much bigger than before: c000cf68 <sched_clock>: c000cf68: 7d 2d 42 a6 mftbu r9 c000cf6c: 7d 0c 42 a6 mftb r8 c000cf70: 7d 4d 42 a6 mftbu r10 c000cf74: 7c 09 50 40 cmplw r9,r10 c000cf78: 40 82 ff f0 bne c000cf68 <sched_clock> c000cf7c: 3d 40 c1 37 lis r10,-16073 c000cf80: 38 8a b3 30 addi r4,r10,-19664 c000cf84: 80 ea b3 30 lwz r7,-19664(r10) c000cf88: 80 64 00 14 lwz r3,20(r4) c000cf8c: 39 40 00 00 li r10,0 c000cf90: 80 a4 00 04 lwz r5,4(r4) c000cf94: 80 c4 00 10 lwz r6,16(r4) c000cf98: 7c 63 40 10 subfc r3,r3,r8 c000cf9c: 80 84 00 08 lwz r4,8(r4) c000cfa0: 7d 06 49 10 subfe r8,r6,r9 c000cfa4: 7c c7 19 d6 mullw r6,r7,r3 c000cfa8: 7d 25 18 16 mulhwu r9,r5,r3 c000cfac: 7c 08 29 d6 mullw r0,r8,r5 c000cfb0: 7c 67 18 16 mulhwu r3,r7,r3 c000cfb4: 7d 29 30 14 addc r9,r9,r6 c000cfb8: 7c a8 28 16 mulhwu r5,r8,r5 c000cfbc: 7c ca 51 14 adde r6,r10,r10 c000cfc0: 7d 67 41 d6 mullw r11,r7,r8 c000cfc4: 7d 29 00 14 addc r9,r9,r0 c000cfc8: 7c c6 01 94 addze r6,r6 c000cfcc: 7c 63 28 14 addc r3,r3,r5 c000cfd0: 7d 4a 51 14 adde r10,r10,r10 c000cfd4: 7c e7 40 16 mulhwu r7,r7,r8 c000cfd8: 7c 63 58 14 addc r3,r3,r11 c000cfdc: 7d 4a 01 94 addze r10,r10 c000cfe0: 7c 63 30 14 addc r3,r3,r6 c000cfe4: 7d 4a 39 14 adde r10,r10,r7 c000cfe8: 35 24 ff e0 addic. r9,r4,-32 c000cfec: 41 80 00 10 blt c000cffc <sched_clock+0x94> c000cff0: 7c 63 48 30 slw r3,r3,r9 c000cff4: 38 80 00 00 li r4,0 c000cff8: 4e 80 00 20 blr c000cffc: 21 04 00 1f subfic r8,r4,31 c000d000: 54 69 f8 7e srwi r9,r3,1 c000d004: 7d 4a 20 30 slw r10,r10,r4 c000d008: 7d 29 44 30 srw r9,r9,r8 c000d00c: 7c 64 20 30 slw r4,r3,r4 c000d010: 7d 23 53 78 or r3,r9,r10 c000d014: 4e 80 00 20 blr Before this change: c000d0bc <sched_clock>: c000d0bc: 94 21 ff f0 stwu r1,-16(r1) c000d0c0: 7c 08 02 a6 mflr r0 c000d0c4: 90 01 00 14 stw r0,20(r1) c000d0c8: 93 e1 00 0c stw r31,12(r1) c000d0cc: 7d 2d 42 a6 mftbu r9 c000d0d0: 7d 0c 42 a6 mftb r8 c000d0d4: 7d 4d 42 a6 mftbu r10 c000d0d8: 7c 09 50 40 cmplw r9,r10 c000d0dc: 40 82 ff f0 bne c000d0cc <sched_clock+0x10> c000d0e0: 3f e0 c1 37 lis r31,-16073 c000d0e4: 3b ff b3 30 addi r31,r31,-19664 c000d0e8: 80 9f 00 14 lwz r4,20(r31) c000d0ec: 80 7f 00 10 lwz r3,16(r31) c000d0f0: 7c 84 40 10 subfc r4,r4,r8 c000d0f4: 80 bf 00 00 lwz r5,0(r31) c000d0f8: 80 df 00 04 lwz r6,4(r31) c000d0fc: 7c 63 49 10 subfe r3,r3,r9 c000d100: 48 00 37 85 bl c0010884 <mulhdu> c000d104: 81 3f 00 08 lwz r9,8(r31) c000d108: 35 49 ff e0 addic. r10,r9,-32 c000d10c: 41 80 00 20 blt c000d12c <sched_clock+0x70> c000d110: 80 01 00 14 lwz r0,20(r1) c000d114: 7c 83 50 30 slw r3,r4,r10 c000d118: 83 e1 00 0c lwz r31,12(r1) c000d11c: 38 80 00 00 li r4,0 c000d120: 7c 08 03 a6 mtlr r0 c000d124: 38 21 00 10 addi r1,r1,16 c000d128: 4e 80 00 20 blr c000d12c: 80 01 00 14 lwz r0,20(r1) c000d130: 54 8a f8 7e srwi r10,r4,1 c000d134: 21 09 00 1f subfic r8,r9,31 c000d138: 83 e1 00 0c lwz r31,12(r1) c000d13c: 7c 63 48 30 slw r3,r3,r9 c000d140: 7d 4a 44 30 srw r10,r10,r8 c000d144: 7c 84 48 30 slw r4,r4,r9 c000d148: 7d 43 1b 78 or r3,r10,r3 c000d14c: 7c 08 03 a6 mtlr r0 c000d150: 38 21 00 10 addi r1,r1,16 c000d154: 4e 80 00 20 blr c0010884 <mulhdu>: c0010884: 2c 06 00 00 cmpwi r6,0 c0010888: 2c 83 00 00 cmpwi cr1,r3,0 c001088c: 7c 8a 23 78 mr r10,r4 c0010890: 7c 84 28 16 mulhwu r4,r4,r5 c0010894: 41 82 00 14 beq c00108a8 <mulhdu+0x24> c0010898: 7c 0a 30 16 mulhwu r0,r10,r6 c001089c: 7c ea 29 d6 mullw r7,r10,r5 c00108a0: 7c e0 38 14 addc r7,r0,r7 c00108a4: 7c 84 01 94 addze r4,r4 c00108a8: 4d 86 00 20 beqlr cr1 c00108ac: 7d 23 29 d6 mullw r9,r3,r5 c00108b0: 7d 43 28 16 mulhwu r10,r3,r5 c00108b4: 41 82 00 18 beq c00108cc <mulhdu+0x48> c00108b8: 7c 03 31 d6 mullw r0,r3,r6 c00108bc: 7d 03 30 16 mulhwu r8,r3,r6 c00108c0: 7c e0 38 14 addc r7,r0,r7 c00108c4: 7c 84 41 14 adde r4,r4,r8 c00108c8: 7d 4a 01 94 addze r10,r10 c00108cc: 7c 84 48 14 addc r4,r4,r9 c00108d0: 7c 6a 01 94 addze r3,r10 c00108d4: 4e 80 00 20 blr Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/f29e473c193c87bdbd36b209dfdee99d2f0c60dc.1733566130.git.christophe.leroy@csgroup.eu |
||
|
Michael Ellerman
|
cf89c9434a |
powerpc/prom_init: Fixup missing powermac #size-cells
On some powermacs `escc` nodes are missing `#size-cells` properties, which is deprecated and now triggers a warning at boot since commit |
||
|
Linus Torvalds
|
42d9e8b7cc |
powerpc updates for 6.13
- Rework kfence support for the HPT MMU to work on systems with >= 16TB of RAM.
- Remove the powerpc "maple" platform, used by the "Yellow Dog Powerstation".
- Add support for DYNAMIC_FTRACE_WITH_CALL_OPS,
DYNAMIC_FTRACE_WITH_DIRECT_CALLS & BPF Trampolines.
- Add support for running KVM nested guests on Power11.
- Other small features, cleanups and fixes.
Thanks to: Amit Machhiwal, Arnd Bergmann, Christophe Leroy, Costa Shulyupin,
David Hunter, David Wang, Disha Goel, Gautam Menghani, Geert Uytterhoeven,
Hari Bathini, Julia Lawall, Kajol Jain, Keith Packard, Lukas Bulwahn, Madhavan
Srinivasan, Markus Elfring, Michal Suchanek, Ming Lei, Mukesh Kumar Chaurasiya,
Nathan Chancellor, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A, Paulo Miguel
Almeida, Pavithra Prakash, Ritesh Harjani (IBM), Rob Herring (Arm), Sachin P
Bappalige, Shen Lichuan, Simon Horman, Sourabh Jain, Thomas Weißschuh, Thorsten
Blum, Thorsten Leemhuis, Venkat Rao Bagalkote, Zhang Zekun,
zhang jiao.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZ0Fi5AAKCRAF0oADX8se
IeI0AQCAkNWRYzGNzPM6aMwDpq5qdeZzvp0rZxuNsRSnIKJlxAD+PAOxOietgjbQ
Lxt3oizg+UcH/304Y/iyT8IrwI4n+gE=
=xNtu
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Rework kfence support for the HPT MMU to work on systems with >= 16TB
of RAM.
- Remove the powerpc "maple" platform, used by the "Yellow Dog
Powerstation".
- Add support for DYNAMIC_FTRACE_WITH_CALL_OPS,
DYNAMIC_FTRACE_WITH_DIRECT_CALLS & BPF Trampolines.
- Add support for running KVM nested guests on Power11.
- Other small features, cleanups and fixes.
Thanks to Amit Machhiwal, Arnd Bergmann, Christophe Leroy, Costa
Shulyupin, David Hunter, David Wang, Disha Goel, Gautam Menghani, Geert
Uytterhoeven, Hari Bathini, Julia Lawall, Kajol Jain, Keith Packard,
Lukas Bulwahn, Madhavan Srinivasan, Markus Elfring, Michal Suchanek,
Ming Lei, Mukesh Kumar Chaurasiya, Nathan Chancellor, Naveen N Rao,
Nicholas Piggin, Nysal Jan K.A, Paulo Miguel Almeida, Pavithra Prakash,
Ritesh Harjani (IBM), Rob Herring (Arm), Sachin P Bappalige, Shen
Lichuan, Simon Horman, Sourabh Jain, Thomas Weißschuh, Thorsten Blum,
Thorsten Leemhuis, Venkat Rao Bagalkote, Zhang Zekun, and zhang jiao.
* tag 'powerpc-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (89 commits)
EDAC/powerpc: Remove PPC_MAPLE drivers
powerpc/perf: Add per-task/process monitoring to vpa_pmu driver
powerpc/kvm: Add vpa latency counters to kvm_vcpu_arch
docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Document sysfs event format entries for vpa_pmu
powerpc/perf: Add perf interface to expose vpa counters
MAINTAINERS: powerpc: Mark Maddy as "M"
powerpc/Makefile: Allow overriding CPP
powerpc-km82xx.c: replace of_node_put() with __free
ps3: Correct some typos in comments
powerpc/kexec: Fix return of uninitialized variable
macintosh: Use common error handling code in via_pmu_led_init()
powerpc/powermac: Use of_property_match_string() in pmac_has_backlight_type()
powerpc: remove dead config options for MPC85xx platform support
powerpc/xive: Use cpumask_intersects()
selftests/powerpc: Remove the path after initialization.
powerpc/xmon: symbol lookup length fixed
powerpc/ep8248e: Use %pa to format resource_size_t
powerpc/ps3: Reorganize kerneldoc parameter names
KVM: PPC: Book3S HV: Fix kmv -> kvm typo
powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static
...
|
||
|
Linus Torvalds
|
5c00ff742b |
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection algorithm.
This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of shadow
entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in the
hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page into
small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio size
rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt
removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations" from
Mike Rapoport teaches x86 to use large pages for read-only-execute
module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests
over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a single
VMA, rather than requiring that multiple VMAs be created for this.
Improved efficiencies for userspace memory allocators are expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP from
the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep is
enabled.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzwFqgAKCRDdBJ7gKXxA
jkeuAQCkl+BmeYHE6uG0hi3pRxkupseR6DEOAYIiTv0/l8/GggD/Z3jmEeqnZaNq
xyyenpibWgUoShU2wZ/Ha8FE5WDINwg=
=JfWR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
||
|
Linus Torvalds
|
e6de688e93 |
Devicetree updates for v6.13:
Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples.
Fix the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys address
of the DTB as __pa() is not always valid to use. This fixes a warning
for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports and
endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever possible
-----BEGIN PGP SIGNATURE-----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=NCYS
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
|
||
|
Linus Torvalds
|
aad3a0d084 |
ftrace updates for v6.13:
- Merged tag ftrace-v6.12-rc4 There was a fix to locking in register_ftrace_graph() for shadow stacks that was sent upstream. But this code was also being rewritten, and the locking fix was needed. Merging this fix was required to continue the work. - Restructure the function graph shadow stack to prepare it for use with kretprobes With the goal of merging the shadow stack logic of function graph and kretprobes, some more restructuring of the function shadow stack is required. Move out function graph specific fields from the fgraph infrastructure and store it on the new stack variables that can pass data from the entry callback to the exit callback. Hopefully, with this change, the merge of kretprobes to use fgraph shadow stacks will be ready by the next merge window. - Make shadow stack 4k instead of using PAGE_SIZE. Some architectures have very large PAGE_SIZE values which make its use for shadow stacks waste a lot of memory. - Give shadow stacks its own kmem cache. When function graph is started, every task on the system gets a shadow stack. In the future, shadow stacks may not be 4K in size. Have it have its own kmem cache so that whatever size it becomes will still be efficient in allocations. - Initialize profiler graph ops as it will be needed for new updates to fgraph - Convert to use guard(mutex) for several ftrace and fgraph functions - Add more comments and documentation - Show function return address in function graph tracer Add an option to show the caller of a function at each entry of the function graph tracer, similar to what the function tracer does. - Abstract out ftrace_regs from being used directly like pt_regs ftrace_regs was created to store a partial pt_regs. It holds only the registers and stack information to get to the function arguments and return values. On several archs, it is simply a wrapper around pt_regs. But some users would access ftrace_regs directly to get the pt_regs which will not work on all archs. Make ftrace_regs an abstract structure that requires all access to its fields be through accessor functions. - Show how long it takes to do function code modifications When code modification for function hooks happen, it always had the time recorded in how long it took to do the conversion. But this value was never exported. Recently the code was touched due to new ROX modification handling that caused a large slow down in doing the modifications and had a significant impact on boot times. Expose the timings in the dyn_ftrace_total_info file. This file was created a while ago to show information about memory usage and such to implement dynamic function tracing. It's also an appropriate file to store the timings of this modification as well. This will make it easier to see the impact of changes to code modification on boot up timings. - Other clean ups and small fixes -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZztrUxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qnnNAQD6w4q9VQ7oOE2qKLqtnj87h4c1GqKn SPkpEfC3n/ATEAD/fnYjT/eOSlHiGHuD/aTA+U/bETrT99bozGM/4mFKEgY= =6nCa -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Restructure the function graph shadow stack to prepare it for use with kretprobes With the goal of merging the shadow stack logic of function graph and kretprobes, some more restructuring of the function shadow stack is required. Move out function graph specific fields from the fgraph infrastructure and store it on the new stack variables that can pass data from the entry callback to the exit callback. Hopefully, with this change, the merge of kretprobes to use fgraph shadow stacks will be ready by the next merge window. - Make shadow stack 4k instead of using PAGE_SIZE. Some architectures have very large PAGE_SIZE values which make its use for shadow stacks waste a lot of memory. - Give shadow stacks its own kmem cache. When function graph is started, every task on the system gets a shadow stack. In the future, shadow stacks may not be 4K in size. Have it have its own kmem cache so that whatever size it becomes will still be efficient in allocations. - Initialize profiler graph ops as it will be needed for new updates to fgraph - Convert to use guard(mutex) for several ftrace and fgraph functions - Add more comments and documentation - Show function return address in function graph tracer Add an option to show the caller of a function at each entry of the function graph tracer, similar to what the function tracer does. - Abstract out ftrace_regs from being used directly like pt_regs ftrace_regs was created to store a partial pt_regs. It holds only the registers and stack information to get to the function arguments and return values. On several archs, it is simply a wrapper around pt_regs. But some users would access ftrace_regs directly to get the pt_regs which will not work on all archs. Make ftrace_regs an abstract structure that requires all access to its fields be through accessor functions. - Show how long it takes to do function code modifications When code modification for function hooks happen, it always had the time recorded in how long it took to do the conversion. But this value was never exported. Recently the code was touched due to new ROX modification handling that caused a large slow down in doing the modifications and had a significant impact on boot times. Expose the timings in the dyn_ftrace_total_info file. This file was created a while ago to show information about memory usage and such to implement dynamic function tracing. It's also an appropriate file to store the timings of this modification as well. This will make it easier to see the impact of changes to code modification on boot up timings. - Other clean ups and small fixes * tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits) ftrace: Show timings of how long nop patching took ftrace: Use guard to take ftrace_lock in ftrace_graph_set_hash() ftrace: Use guard to take the ftrace_lock in release_probe() ftrace: Use guard to lock ftrace_lock in cache_mod() ftrace: Use guard for match_records() fgraph: Use guard(mutex)(&ftrace_lock) for unregister_ftrace_graph() fgraph: Give ret_stack its own kmem cache fgraph: Separate size of ret_stack from PAGE_SIZE ftrace: Rename ftrace_regs_return_value to ftrace_regs_get_return_value selftests/ftrace: Fix check of return value in fgraph-retval.tc test ftrace: Use arch_ftrace_regs() for ftrace_regs_*() macros ftrace: Consolidate ftrace_regs accessor functions for archs using pt_regs ftrace: Make ftrace_regs abstract from direct use fgragh: No need to invoke the function call_filter_check_discard() fgraph: Simplify return address printing in function graph tracer function_graph: Remove unnecessary initialization in ftrace_graph_ret_addr() function_graph: Support recording and printing the function return address ftrace: Have calltime be saved in the fgraph storage ftrace: Use a running sleeptime instead of saving on shadow stack fgraph: Use fgraph data to store subtime for profiler ... |
||
|
Linus Torvalds
|
bf9aa14fc5 |
A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the signal
of the timer is ignored so that the timer signal can be delivered once
the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small intervals
and keeps the system pointlessly out of low power states for no value.
This is a long standing non-trivial problem due to the lock order of
posix-timer lock and the sighand lock along with life time issues as
the timer and the sigqueue have different life time rules.
Cure this by:
* Embedding the sigqueue into the timer struct to have the same life
time rules. Aside of that this also avoids the lookup of the timer
in the signal delivery and rearm path as it's just a always valid
container_of() now.
* Queuing ignored timer signals onto a seperate ignored list.
* Moving queued timer signals onto the ignored list when the signal is
switched to SIG_IGN before it could be delivered.
* Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal delivery
code to rearm the timer.
This also required to consolidate the signal delivery rules so they are
consistent across all situations. With that all self test scenarios
finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time stamps
by default and switch to fine grained time stamps when inode attributes
are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that the
VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
* Move all sleep and timeout functions into one file
* Rework udelay() and ndelay() into proper documented inline functions
and replace the hardcoded magic numbers by proper defines.
* Rework the fsleep() implementation to take the reality of the timer
wheel granularity on different HZ values into account. Right now the
boundaries are hard coded time ranges which fail to provide the
requested accuracy on different HZ settings.
* Update documentation for all sleep/timeout related functions and fix
up stale documentation links all over the place
* Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as that's
the clock which drives the timekeeping adjustments via the various user
space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file descriptor
based posix clocks, but their usability is very limited. They can't be
accessed fast as they always go all the way out to the hardware and
they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the kernel
provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework converts
timekeeping and adjtimex(2) into generic functionality which operates
on pointers to data structures instead of using static variables.
This allows to provide time accessors and adjtimex(2) functionality for
the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less straight
forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the core
code and a few usage sites of the less frequently used interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is already
prepared and scheduled for the next merge window.
- Drivers:
* Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with other
clusters.
* Mostly boring cleanups, fixes, improvements and code movement
-----BEGIN PGP SIGNATURE-----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=2VC6
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
||
|
Linus Torvalds
|
0352387523 |
First step of consolidating the VDSO data page handling:
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various mechanisms
and fail to provide a clear separation of the functionalities.
Clean this up by:
* consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
* removing the last includes of header files which are pulling in other
headers outside of the VDSO namespace.
* seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every architecture
add support seperately.
-----BEGIN PGP SIGNATURE-----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=q5eD
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso data page handling updates from Thomas Gleixner:
"First steps of consolidating the VDSO data page handling.
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various
mechanisms and fail to provide a clear separation of the
functionalities.
Clean this up by:
- consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
- removing the last includes of header files which are pulling in
other headers outside of the VDSO namespace.
- seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every
architecture add support seperately"
* tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/vdso: Add missing brackets in switch case
vdso: Rename struct arch_vdso_data to arch_vdso_time_data
powerpc: Split systemcfg struct definitions out from vdso
powerpc: Split systemcfg data out of vdso data page
powerpc: Add kconfig option for the systemcfg page
powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors
powerpc/pseries/lparcfg: Fix printing of system_active_processors
powerpc/procfs: Propagate error of remap_pfn_range()
powerpc/vdso: Remove offset comment from 32bit vdso_arch_data
x86/vdso: Split virtual clock pages into dedicated mapping
x86/vdso: Delete vvar.h
x86/vdso: Access vdso data without vvar.h
x86/vdso: Move the rng offset to vsyscall.h
x86/vdso: Access rng vdso data without vvar.h
x86/vdso: Access timens vdso data without vvar.h
x86/vdso: Allocate vvar page from C code
x86/vdso: Access rng data from kernel without vvar
x86/vdso: Place vdso_data at beginning of vvar page
x86/vdso: Use __arch_get_vdso_data() to access vdso data
x86/mm/mmap: Remove arch_vma_name()
...
|
||
|
Linus Torvalds
|
82339c4911 |
sanitize xattr and io_uring interactions with it,
add *xattrat() syscalls, sanitize struct filename handling in there. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdj4gAKCRBZ7Krx/gZQ 6/02AQC8ndn9i1wLGRb5DdZYGNWUDhXCdPrZCF2nyvU2swCIPwEAm1H5F/bxBXeT 6qCLHThVw4KTJOT2aDY03ELrxbi8Vg4= =35Oj -----END PGP SIGNATURE----- Merge tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull xattr updates from Al Viro: "Sanitize xattr and io_uring interactions with it, add *xattrat() syscalls, sanitize struct filename handling in there" * tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: xattr: remove redundant check on variable err fs/xattr: add *at family syscalls new helpers: file_removexattr(), filename_removexattr() new helpers: file_listxattr(), filename_listxattr() replace do_getxattr() with saner helpers. replace do_setxattr() with saner helpers. new helper: import_xattr_name() fs: rename struct xattr_ctx to kernel_xattr_ctx xattr: switch to CLASS(fd) io_[gs]etxattr_prep(): just use getname() io_uring: IORING_OP_F[GS]ETXATTR is fine with REQ_F_FIXED_FILE getname_maybe_null() - the third variant of pathname copy-in teach filename_lookup() to treat NULL filename as "" |
||
|
Arnd Bergmann
|
a5371018ee |
powerpc/Makefile: Allow overriding CPP
Unlike all other arches, powerpc doesn't allow the user to override CPP, because it sets it unconditionally in the arch Makefile. This can lead to strange build failures. Instead add the required flags to KBUILD_CPPFLAGS, which are passed to CPP, CC and AS invocations by the generic Makefile logic. Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/all/20240607061629.530301-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> [mpe: Rebase, write change log, add Arnd's SoB as communicated privately] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241107112646.32401-1-mpe@ellerman.id.au |
||
|
Thomas Weißschuh
|
d7a82238cb |
powerpc/vdso: Remove unused clockmode asm offsets
These offsets are not used anymore, delete them.
Fixes:
|
||
|
David Wang
|
5b881c1f83 |
powerpc/irq: use seq_put_decimal_ull_width() for decimal values
On a system with n CPUs and m interrupts, there will be n*m decimal values yielded via seq_printf(.."%10u "..) which is less efficient than seq_put_decimal_ull_width(), stress reading /proc/interrupts indicates ~30% performance improvement with this patch. Signed-off-by: David Wang <00107082@163.com> [mpe: Flesh out change log based on original submission] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/all/20241103080552.4787-1-00107082@163.com Link: https://patch.msgid.link/20241108162327.9887-1-00107082@163.com |