It's a requirement that DT overlays be applied at build time in order to
validate them as overlays are not validated on their own.
Add missing target for mt8395-radxa hd panel overlay.
Fixes: 4c8ff61199 ("arm64: dts: mediatek: mt8395-radxa-nio-12l: Add Radxa 8 HD panel")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: AngeloGioacchino Del Regno <angelogiaocchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Build devicetree binaries for testing overlays and providing users
full dtb without using overlays for Bananapi R4 (pro) variants.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add MMC overlays for BPI-R4 Pro.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add overlays to switch between key-m and key-e slots.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add devicetree for Bpi-R4-Pro.
BananaPi R4 Pro is a MT7988A based board which exists in 2 different
hardware versions:
- 4E: 4 GB RAM and using internal 2.5G Phy for WAN-Combo
- 8X: 8 GB RAM and 2x Aeonsemi AS21010P 10G phys
common parts:
- MediaTek MT7988A Quad-core Arm Corex-A73,1.8GHz processor
- 8GB eMMC flash
- 256MB SPI-NAND Flash
- Micro SD card slot
- 1x 10G SFP+ WAN
- 1x 10G SFP+ LAN
- 4x 2.5G RJ45 LAN (MxL86252C)
- 1x 1G RJ45 LAN (MT7988 internal switch)
- 2x miniPCIe slots with PCIe3.0 2lane interface for Wi-Fi NIC
- 2x M.2 M-KEY slots with PCIe3.0 1lane interface for NVME SSD
- 3x M.2 B-KEY slots with USB3.2 for 5G Module (PCIe shared with key-m)
- 1x USB3.2 slot
- 1x USB2.0 slot
- 1x USB TypeC Debug Console
- 2x13 PIN Header for expanding application
https://docs.banana-pi.org/en/BPI-R4_Pro/BananaPi_BPI-R4_Pro
The PCIe is per default in key-m state and can be changed to key-b with
the pcie-overlays.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add support for Grinn GenioSBC-510. Based on the commit introducing
support for the Grinn GenioSBC-700, this change adds support for the
Grinn GenioSBC-510, a single-board computer based on the MediaTek Genio
510 SoC.
More details about the hardware:
- https://grinn-global.com/products/grinn-geniosom-510
- https://grinn-global.com/products/grinn-genioboard-edge-ai-sbc
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add support for Grinn GenioSBC-700. The Grinn GenioSBC-700 is a
single-board computer based on the MediaTek Genio 700 SoC. Its device
tree is split into separate SoM (.dtsi) and SBC (.dtsi) files, which are
combined in the SoC-specific .dts file.
More details about the hardware:
- https://grinn-global.com/products/grinn-geniosom-700
- https://grinn-global.com/products/grinn-genioboard-edge-ai-sbc
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mateusz Koza <mateusz.koza@grinn-global.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a basic device-tree (mt8395-genio-1200-evk-ufs.dts) in order to be able
to use UFS storage as the main storage on Genio 1200 EVK board.
This board is the origin Genio 1200 EVK already mounted two main storages,
one is eMMC, and the other is UFS. The system automatically prioritizes
between eMMC and UFS via BROM detection, so user could not use both storage
types simultaneously. As a result, mt8395-evk-ufs must be treated as a
separate board.
It use mt8395-genio-common.dtsi file to use common definitions.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a device tree for the MT8186 based Squirtle Chromebooks, also known
as the Acer Chromebook Spin 311 (R724T). The device is a 2-in-1
convertible.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-7-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
There are only two different SKUs of Voltorb, and the only difference
between them is whether a touchscreen is present or not. This can be
detected by a simple I2C transfer to the address, instead of having
separate device trees.
Merge the two device trees together and simplify the compatible string
list. The dtsi is still kept separate since there is an incoming device
that shares the same design, but with slightly difference components.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-6-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Sinovoip has released other variants of Bananapi-R4 board.
The known changes affecting only the LAN SFP+ slot which is replaced
by a 2.5G phy with optional PoE.
Just move the common parts to a new dtsi and keep differences (only
i2c for lan-sfp) in dts.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogiaocchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250422132438.15735-3-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8186 ponyta, known as huaqin custom label, is a
MT8186 based laptop. It is based on the "corsola" design.
It includes LTE, touchpad combinations.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Link: https://lore.kernel.org/r/20250424010850.994288-3-cengjianeng@huaqin.corp-partner.google.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The Radxa 8 HD touchscreen can be used with various Radxa board
and is sold appart from the Radxa NIO 12L development kit.
Add a DTS overlay for this panel.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250304-radxa-panel-overlay-v2-2-3ee6797d3f86@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a basic device-tree (mt8370-genio-510-evk.dts) in order to be able
to boot the Genio 510 EVK board, based on MediaTek MT8370 SoC. As being
very close to the Genio 700 EVK board, the dts includes
mt8390-genio-common.dtsi file to use common definitions.
The Genio 510 EVK has following features:
- MT8370 SoC
- MT6365 PMIC
- MT6319 Buck IC
- 4GB LPDDR4X
- 64GB eMMC 5.1
- 12V DC Jack
- Micro SD card slot
- Push Button x 4 (Power, Reset, Download and Home Key)
- LED x 4 (Power, Reset, System on and Charging Status)
- USB Device Port x 1 (Micro USB Connector)
- USB Host Port x 1 (Type-C USB Connector)
- 3.5mm Earphone Jack x 1 (with Microphone Input)
- 3.5mm Line Out Audio Jack x 1
- Analog Microphone x 1
- Digital Microphone x 2
- Gigabit Ethernet with RJ45 connector
- HDMI 2.0 TX port with Type A HDMI connector
- eDP port
- 3x UART with serial-to-usb converters and micro USB connectors
- M.2 Slot x 2
- I2C Capacitive Touch Pad
- 4-Lane DSI x 2
- 4-Data Lane CSI x 2
- I2S Pin header
- 40-Pin 2.54mm Pin Header x 1
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250206-dts_mt8370-genio-510-v3-4-5ca5c3257a4c@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The Hayato rev5 sku2 and Spherion rev4 variants were designed in
anticipation of shortages of the headphone codec. This never happened.
As far as our records show: the variants were never produced or
shipped, and no such devices were deployed to any lab.
Drop them.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241224084839.2904335-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Bananapi R4 can use the mmc controller either with sd card or the onboard
emmc. The used device is selected through hardware-switches and probed in
bootloader.
Add devicetree overlays for both mmc configurations.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-14-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Bananapi R3 has a Power socket entended for using external SATA drives.
This Socket is off by default but can be switched with gpio 8.
Add an overlay to activate it.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20241206132401.70259-1-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8186 chinchou, known as ASUS Chromebook CZ12 Flip (CZ1204F)
and CZ12(CZ1204C), is a MT8186 based laptop.
It is based on the "corsola" design.It includes chinchou and chinchou360,
including LTE, stylus, touchscreen combinations.
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Link: https://lore.kernel.org/r/20241212062046.22509-3-xiazhengqiao@huaqin.corp-partner.google.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add support for Starmie Chromebooks.
Signed-off-by: Wojciech Macek <wmacek@chromium.org>
Link: https://lore.kernel.org/r/20241129055720.3328681-3-wmacek@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Introduce MT8188-based Chromebook Ciri, also known commercially as
Lenovo Chromebook Duet (11", 9).
Ciri is a detachable device based on the Geralt design, where Geralt is
the codename for the MT8188 platform. Ciri offers 8 SKUs to accommodate
different combinations of second-source components, including:
- audio codecs (RT5682S and ES8326)
- speaker amps (TAS2563 and MAX98390)
- MIPI-DSI panels (BOE nv110wum-l60 and IVO t109nw41)
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241124085739.290556-3-fshao@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add device trees for the MT8186 based Voltorb Chromebooks, also known
as the Acer Chromebook 311 (C723/C723T). The devices are clamshell
style laptops with an optional touchscreen.
The devices differ from the other existing MT8186 Chromebooks in that
it uses a higher speced / binned SoC which also requires a separate
PMIC for the big core cluster. Also, a different codec is used for
the internal speakers.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240620094746.2404753-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add DTC_FLAGS '-@' for mt7986a-bananapi-bpi-r3 and -mini to
instruct the devicetree compiler to enable generation of symbols.
This allows proper support for Device Tree Overlay(s) for those
boards; future boards that need DTBO support are expected to add
their own DTC_FLAGS_{dtb-name}.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240620101830.1097548-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
OpenWrt One is the first ever OpenWrt product. It's based on MT7981B
(AKA Filogic 820) and has 1 GiB or DDR4 RAM. The rest of peripherals
remains to be added later.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240527115933.7396-4-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add basic support for the Kontron 3.5" single board computer featuring a
Mediatek i1200 SoC (MT8395/MT8195).
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240408080816.4134370-2-mwalle@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a devicetree for the Cherry Dojo (HP Chromebook x360 13b-ca0002sa)
convertible type machine.
Differences with the already supported Tomato machines include:
- Different speaker amplifiers (Dual MAX98380, one per channel)
- I2C Touchscreen is on a different address (though still a HID device)
- Has NVMe storage on the PCIe0 controller
- Slightly different keyboard top row keymap
Link: https://lore.kernel.org/r/20240314103500.93158-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add basic device-tree for the Genio 700 EVK board. The
Genio 700 EVK is based on MediaTek MT8390 SoC.
MT8390 hardware register maps are identical to MT8188.
The Genio 700 EVK has following features:
- MT8390 SoC
- MT6365 PMIC
- MT6319 Buck IC
- 12V DC Jack
- 2x4GB LPDDR4X
- 64GB eMMC 5.1
- 64Mb SPI NOR
- M.2 Key A-E slot with PCIe Gen2 and USB 2.0
- 2x DSI LCM ports
- 2x touch sensor ports
- 2x MIPI-CSI, as camera daughter board slots
- USB 2 micro USB connector
- USB 3 with 1 to 2 hub:
- M.2 Key B slot
- Type-C connector, with DisplayPort over Type-C
- HDMI 2.0 TX port with Type A HDMI connector
- eDP port
- Gigabit Ethernet with RJ45 connector
- SD card slot
- Earphone Jack
- Analog Microphone
- 2x Digital Microphone
- 3x UART with serial-to-usb converters and micro USB connectors
Signed-off-by: Chris-QJ Chen <chris-qj.chen@mediatek.com>
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230915081212.13959-2-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cudy WR3000 V1 is an MT7981B (AKA Filogic 820) based wireless router. It
has 256 MiB of RAM, some LEDs & buttons and (not described yet) 4
Ethernet ports.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317223206.22033-5-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acelink EW-7886CAX is an MT7986A (AKA Filogic 830) based access point.
It has 512 MiB of RAM, one 2.5 Gbps PoE (802.3at) Ethernet port and
on-SoC Wi-Fi.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231207080512.3688-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add entries for the MT8186 based Chromebooks, also collectively known
as the Lenovo IdeaPad Slim 3 Chromebook (14M868). It is also based on
the "Steelix" design. Being a laptop instead of a convertible device,
there is no stylus, which is similar to Rusty. However Magneton does
not have ports on the right side of the device.
Three variants are listed separately. These use different touchscreen
controllers, or lack a touchscreen altogether.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-10-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8186 Rusty, otherwise known as the Lenovo 100e Chromebook Gen 4, is an
MT8186 based laptop. It is based on the "Steelix" design. Being a laptop
instead of a convertible device, there is no touchscreen or stylus.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-9-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4,
is a convertible device based on a common design of the same name. The
device comes in different variants. Of them, whether a world facing
camera is integrated is the only differentiating factor between the
two device trees added. The different SKU IDs describe this alone.
The other device difference is the trackpad component used. This is
simply handled by having both possible components described in the
device tree, and letting the implementation figure out which one is
actually available. The system bootloader / firmware does not
differentiate this in that they share the same SKU IDs.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-8-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tentacruel and Tentacool are MT8186 based Chromebooks based on the
Krabby design.
Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
convertible device with touchscreen and stylus.
Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
device. It does not have a touchscreen or stylus.
The two devices both have two variants. The difference is a second
source trackpad controller that shares the same address as the original,
but is incompatible.
The extra SKU IDs for the Tentacruel devices map to different sensor
components attached to the Embedded Controller. These are not visible
to the main processor.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-7-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT7988A (AKA MediaTek Filogic 880) is a quad-core ARM Cortex-A73
platform designed for Wi-Fi 7 devices (there is no wireless on SoC
though). The first public MT7988A device is Banana Pi BPI-R4.
Many SoC parts remain to be added (they need their own bindings or
depend on missing clocks). Those present block however are correct and
having base .dtsi will help testing & working on missing stuff.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240108085228.4727-3-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT7981B (AKA MediaTek Filogic 820) is a dual-core ARM Cortex-A53 SoC.
One of market devices using this SoC is Xiaomi AX3000T.
This is initial contribution with basic SoC support. More hardware block
will get added later. Some will need their bindings (like auxadc).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240111103928.721-3-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55
and 2 CA78 cores. MT8188 share many HW IP with MT65xx series.
We add basic chip support for MediaTek MT8188 on evaluation board.
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20231023083839.24453-5-jason-ch.chen@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
pico is also known as Acer Chromebook Spin 311.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[Angelo: Fixed blank lines at the end for pico.dts]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
makomo is also known as Lenovo 100e Chromebook 2nd Gen MTK 2.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
katsu is also known as ASUS Chromebook Detachable CZ1.
Let katsu and kakadu set its own touchscreen and panel compatible. Remove
these setting from the common dtsi for readability.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a devicetree for rev4 of Spherion. It uses the rt5682s audio codec
instead of the rt5682 used in the previous revision.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-6-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add a devicetree for rev5-sku2 of Hayato. It uses the rt5682s audio
codec instead of the rt5682 used in the previous revision.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230721201705.387426-5-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add basic device-tree for the Genio 1200-EVK board. This board
is made by MediaTek and has a MT8395 SoC (MT8195 family),
associated with the MT6359 and MT6360 PMICs, and
the MT7921 connectivity chip.
The IOs available on that board are:
* 1 USB Type-C connector with DP aux mode support
* 2 USB Type-A connector with a USB hub
* 1 micro-USB port for gadget or OTG support
* 1 full size HDMI RX and 1 full size HDMI TX connector
* 1 micro SD slot
* 40 pins header
* SPI interface header
* 1 M.2 slot
* 1 audio jack
* 1 micro-USB port for serial debug
* 2 connectors for DSI displays, 1 of the DSI panel is installed
* 3 connectors for CSI cameras
* 1 connector for a eDP panel
* 1 MMC storage
* 1 Touch Panel (installed DSI display)
* 1 M.2 slot for 5G dongle
This commit adds basic support in order to be able to boot.
Signed-off-by: Ben Lok <ben.lok@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230914055145.16801-2-macpaul.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This adds minimal support for the Mediatek 8365 SOC and the EVK reference
board, allowing the board to boot to initramfs with serial port I/O.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
[bero@baylibre.com: Removed parts depending on drivers that aren't upstream yet, cleanups, add CPU cache layout, add systimer, fix GIC]
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
[aouledameur@baylibre.com: Fix systimer properties]
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230309213501.794764-4-bero@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add support for Bananapi R3 SBC.
- SD/eMMC support (switching first 4 bits of data-bus with sw6/D)
- SPI-NAND/NOR support (switched CS by sw5/C)
- all rj45 ports and both SFP working (eth1/lan4)
- all USB-Ports + SIM-Slot tested
- i2c and all uarts tested
- wifi tested (with eeprom calibration data)
The device can boot from all 4 storage options. Both, SPI and MMC, can
be switched using hardware switches on the board, see
https://wiki.banana-pi.org/Banana_Pi_BPI-R3#Jumper_setting
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20230106152845.88717-6-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add a basic support for the Sony Xperia M5 (codename "Holly")
smartphone, powered by a MediaTek Helio X10 SoC.
This achieves a console boot.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221027095504.37432-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT8186 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55
and 2 CA76 cores. MT8186 share many HW IP with MT65xx series.
We add basic chip support for MediaTek MT8186 on evaluation board.
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Link: https://lore.kernel.org/r/20220825170448.17024-1-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
