mirror of
https://github.com/torvalds/linux.git
synced 2026-06-01 02:53:36 +02:00
arm64: dts: mediatek: add device-tree for Genio 700 EVK board
Add basic device-tree for the Genio 700 EVK board. The Genio 700 EVK is based on MediaTek MT8390 SoC. MT8390 hardware register maps are identical to MT8188. The Genio 700 EVK has following features: - MT8390 SoC - MT6365 PMIC - MT6319 Buck IC - 12V DC Jack - 2x4GB LPDDR4X - 64GB eMMC 5.1 - 64Mb SPI NOR - M.2 Key A-E slot with PCIe Gen2 and USB 2.0 - 2x DSI LCM ports - 2x touch sensor ports - 2x MIPI-CSI, as camera daughter board slots - USB 2 micro USB connector - USB 3 with 1 to 2 hub: - M.2 Key B slot - Type-C connector, with DisplayPort over Type-C - HDMI 2.0 TX port with Type A HDMI connector - eDP port - Gigabit Ethernet with RJ45 connector - SD card slot - Earphone Jack - Analog Microphone - 2x Digital Microphone - 3x UART with serial-to-usb converters and micro USB connectors Signed-off-by: Chris-QJ Chen <chris-qj.chen@mediatek.com> Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230915081212.13959-2-macpaul.lin@mediatek.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This commit is contained in:
Macpaul Lin
AngeloGioacchino Del Regno
parent
341e4a070d
commit
7982bf7ec2
|
|
@ -77,5 +77,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
|
|||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb
|
||||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
|
||||
|
|
|
|||
880
arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
Normal file
880
arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
Normal file
|
|
@ -0,0 +1,880 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2023 MediaTek Inc.
|
||||
* Author: Chris Chen <chris-qj.chen@mediatek.com>
|
||||
* Pablo Sun <pablo.sun@mediatek.com>
|
||||
* Macpaul Lin <macpaul.lin@mediatek.com>
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt8188.dtsi"
|
||||
#include "mt6359.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
|
||||
#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
|
||||
/ {
|
||||
model = "MediaTek Genio-700 EVK";
|
||||
compatible = "mediatek,mt8390-evk", "mediatek,mt8390",
|
||||
"mediatek,mt8188";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:921600n8";
|
||||
};
|
||||
|
||||
firmware {
|
||||
optee {
|
||||
compatible = "linaro,optee-tz";
|
||||
method = "smc";
|
||||
};
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0x2 0x00000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
/*
|
||||
* 12 MiB reserved for OP-TEE (BL32)
|
||||
* +-----------------------+ 0x43e0_0000
|
||||
* | SHMEM 2MiB |
|
||||
* +-----------------------+ 0x43c0_0000
|
||||
* | | TA_RAM 8MiB |
|
||||
* + TZDRAM +--------------+ 0x4340_0000
|
||||
* | | TEE_RAM 2MiB |
|
||||
* +-----------------------+ 0x4320_0000
|
||||
*/
|
||||
optee_reserved: optee@43200000 {
|
||||
no-map;
|
||||
reg = <0 0x43200000 0 0x00c00000>;
|
||||
};
|
||||
|
||||
scp_mem: memory@50000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0 0x50000000 0 0x2900000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
|
||||
bl31_secmon_reserved: memory@54600000 {
|
||||
no-map;
|
||||
reg = <0 0x54600000 0x0 0x200000>;
|
||||
};
|
||||
|
||||
apu_mem: memory@55000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
|
||||
};
|
||||
|
||||
vpu_mem: memory@57000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
|
||||
};
|
||||
};
|
||||
|
||||
common_fixed_5v: regulator-0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5v_en";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&pio 10 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
edp_panel_fixed_3v3: regulator-1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "edp_panel_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&edp_panel_3v3_en_pins>;
|
||||
};
|
||||
|
||||
gpio_fixed_3v3: regulator-2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "gpio_3v3_en";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sdio_fixed_1v8: regulator-3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "sdio_io";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sdio_fixed_3v3: regulator-4 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "sdio_card";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&pio 74 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
touch0_fixed_3v3: regulator-5 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "touch_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&pio 119 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
usb_hub_fixed_3v3: regulator-6 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_hub_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */
|
||||
startup-delay-us = <10000>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
usb_hub_reset_1v8: regulator-7 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_hub_reset";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
gpio = <&pio 7 GPIO_ACTIVE_HIGH>; /* HUB_RESET */
|
||||
vin-supply = <&usb_hub_fixed_3v3>;
|
||||
};
|
||||
|
||||
usb_p0_vbus: regulator-8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_p0_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&pio 84 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
usb_p1_vbus: regulator-9 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_p1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&pio 87 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
usb_p2_vbus: regulator-10 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_p2_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
touchscreen@5d {
|
||||
compatible = "goodix,gt9271";
|
||||
reg = <0x5d>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>;
|
||||
irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
||||
AVDD28-supply = <&touch0_fixed_3v3>;
|
||||
VDDIO-supply = <&mt6359_vio18_ldo_reg>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&touch_pins>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-1 = <&rt1715_int_pins>;
|
||||
clock-frequency = <1000000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5_pins>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c6_pins>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&mmc0_default_pins>;
|
||||
pinctrl-1 = <&mmc0_uhs_pins>;
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
supports-cqe;
|
||||
cap-mmc-hw-reset;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
hs400-ds-delay = <0x1481b>;
|
||||
vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
|
||||
vqmmc-supply = <&mt6359_vufs_ldo_reg>;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&mmc1_default_pins>;
|
||||
pinctrl-1 = <&mmc1_uhs_pins>;
|
||||
bus-width = <4>;
|
||||
max-frequency = <200000000>;
|
||||
cap-sd-highspeed;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
no-mmc;
|
||||
no-sdio;
|
||||
cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&mt6359_vpa_buck_reg>;
|
||||
vqmmc-supply = <&mt6359_vsim1_ldo_reg>;
|
||||
};
|
||||
|
||||
&mt6359_vbbck_ldo_reg {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&mt6359_vcn18_ldo_reg {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&mt6359_vcn33_2_bt_ldo_reg {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&mt6359_vcore_buck_reg {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&mt6359_vgpu11_buck_reg {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&mt6359_vpa_buck_reg {
|
||||
regulator-max-microvolt = <3100000>;
|
||||
};
|
||||
|
||||
&mt6359_vpu_buck_reg {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&mt6359_vrf12_ldo_reg {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&mt6359_vsim1_ldo_reg {
|
||||
regulator-enable-ramp-delay = <480>;
|
||||
};
|
||||
|
||||
&mt6359_vufs_ldo_reg {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&mt6359codec {
|
||||
mediatek,mic-type-0 = <1>; /* ACC */
|
||||
mediatek,mic-type-1 = <3>; /* DCC */
|
||||
};
|
||||
|
||||
&pio {
|
||||
audio_default_pins: audio-default-pins {
|
||||
pins-cmd-dat {
|
||||
pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>,
|
||||
<PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>,
|
||||
<PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>,
|
||||
<PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>,
|
||||
<PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>,
|
||||
<PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>,
|
||||
<PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>,
|
||||
<PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>,
|
||||
<PINMUX_GPIO109__FUNC_B0_I2SIN_WS>,
|
||||
<PINMUX_GPIO110__FUNC_I0_I2SIN_D0>,
|
||||
<PINMUX_GPIO114__FUNC_O_I2SO2_MCK>,
|
||||
<PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>,
|
||||
<PINMUX_GPIO116__FUNC_B0_I2SO2_WS>,
|
||||
<PINMUX_GPIO117__FUNC_O_I2SO2_D0>,
|
||||
<PINMUX_GPIO118__FUNC_O_I2SO2_D1>,
|
||||
<PINMUX_GPIO121__FUNC_B0_PCM_CLK>,
|
||||
<PINMUX_GPIO122__FUNC_B0_PCM_SYNC>,
|
||||
<PINMUX_GPIO124__FUNC_I0_PCM_DI>,
|
||||
<PINMUX_GPIO125__FUNC_O_DMIC1_CLK>,
|
||||
<PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>,
|
||||
<PINMUX_GPIO128__FUNC_O_DMIC2_CLK>,
|
||||
<PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>;
|
||||
};
|
||||
};
|
||||
|
||||
dptx_pins: dptx-pins {
|
||||
pins-cmd-dat {
|
||||
pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
|
||||
pins1 {
|
||||
pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
eth_default_pins: eth-default-pins {
|
||||
pins-cc {
|
||||
pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
|
||||
<PINMUX_GPIO140__FUNC_I0_GBE_RXC>,
|
||||
<PINMUX_GPIO141__FUNC_I0_GBE_RXDV>,
|
||||
<PINMUX_GPIO142__FUNC_O_GBE_TXEN>;
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
};
|
||||
|
||||
pins-mdio {
|
||||
pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
|
||||
<PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
pins-power {
|
||||
pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>,
|
||||
<PINMUX_GPIO146__FUNC_B_GPIO146>;
|
||||
output-high;
|
||||
};
|
||||
|
||||
pins-rxd {
|
||||
pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
|
||||
<PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
|
||||
<PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
|
||||
<PINMUX_GPIO138__FUNC_I0_GBE_RXD0>;
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
};
|
||||
|
||||
pins-txd {
|
||||
pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
|
||||
<PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
|
||||
<PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
|
||||
<PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
};
|
||||
};
|
||||
|
||||
eth_sleep_pins: eth-sleep-pins {
|
||||
pins-cc {
|
||||
pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
|
||||
<PINMUX_GPIO140__FUNC_B_GPIO140>,
|
||||
<PINMUX_GPIO141__FUNC_B_GPIO141>,
|
||||
<PINMUX_GPIO142__FUNC_B_GPIO142>;
|
||||
};
|
||||
|
||||
pins-mdio {
|
||||
pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
|
||||
<PINMUX_GPIO144__FUNC_B_GPIO144>;
|
||||
input-disable;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pins-rxd {
|
||||
pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
|
||||
<PINMUX_GPIO136__FUNC_B_GPIO136>,
|
||||
<PINMUX_GPIO137__FUNC_B_GPIO137>,
|
||||
<PINMUX_GPIO138__FUNC_B_GPIO138>;
|
||||
};
|
||||
|
||||
pins-txd {
|
||||
pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
|
||||
<PINMUX_GPIO132__FUNC_B_GPIO132>,
|
||||
<PINMUX_GPIO133__FUNC_B_GPIO133>,
|
||||
<PINMUX_GPIO134__FUNC_B_GPIO134>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c0_pins: i2c0-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
|
||||
<PINMUX_GPIO55__FUNC_B1_SCL0>;
|
||||
bias-pull-up = <MTK_PULL_SET_RSEL_011>;
|
||||
drive-strength-microamp = <1000>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
|
||||
<PINMUX_GPIO57__FUNC_B1_SCL1>;
|
||||
bias-pull-up = <MTK_PULL_SET_RSEL_011>;
|
||||
drive-strength-microamp = <1000>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
|
||||
<PINMUX_GPIO59__FUNC_B1_SCL2>;
|
||||
bias-pull-up = <MTK_PULL_SET_RSEL_011>;
|
||||
drive-strength-microamp = <1000>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c3_pins: i2c3-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
|
||||
<PINMUX_GPIO61__FUNC_B1_SCL3>;
|
||||
bias-pull-up = <MTK_PULL_SET_RSEL_011>;
|
||||
drive-strength-microamp = <1000>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
|
||||
<PINMUX_GPIO63__FUNC_B1_SCL4>;
|
||||
bias-pull-up = <MTK_PULL_SET_RSEL_011>;
|
||||
drive-strength-microamp = <1000>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c5_pins: i2c5-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
|
||||
<PINMUX_GPIO65__FUNC_B1_SCL5>;
|
||||
bias-pull-up = <MTK_PULL_SET_RSEL_011>;
|
||||
drive-strength-microamp = <1000>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c6_pins: i2c6-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
|
||||
<PINMUX_GPIO67__FUNC_B1_SCL6>;
|
||||
bias-pull-up = <MTK_PULL_SET_RSEL_011>;
|
||||
drive-strength-microamp = <1000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_key_pins: gpio-key-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>,
|
||||
<PINMUX_GPIO43__FUNC_B1_KPCOL1>,
|
||||
<PINMUX_GPIO44__FUNC_B1_KPROW0>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc0_default_pins: mmc0-default-pins {
|
||||
pins-clk {
|
||||
pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
|
||||
drive-strength = <MTK_DRIVE_6mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
||||
};
|
||||
|
||||
pins-cmd-dat {
|
||||
pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
|
||||
<PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
|
||||
<PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
|
||||
<PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
|
||||
<PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
|
||||
<PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
|
||||
<PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
|
||||
<PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
|
||||
<PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
|
||||
input-enable;
|
||||
drive-strength = <MTK_DRIVE_6mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
|
||||
pins-rst {
|
||||
pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
|
||||
drive-strength = <MTK_DRIVE_6mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc0_uhs_pins: mmc0-uhs-pins {
|
||||
pins-clk {
|
||||
pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
||||
};
|
||||
|
||||
pins-cmd-dat {
|
||||
pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
|
||||
<PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
|
||||
<PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
|
||||
<PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
|
||||
<PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
|
||||
<PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
|
||||
<PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
|
||||
<PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
|
||||
<PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
|
||||
input-enable;
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
|
||||
pins-ds {
|
||||
pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
||||
};
|
||||
|
||||
pins-rst {
|
||||
pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc1_default_pins: mmc1-default-pins {
|
||||
pins-clk {
|
||||
pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
|
||||
drive-strength = <MTK_DRIVE_6mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
||||
};
|
||||
|
||||
pins-cmd-dat {
|
||||
pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
|
||||
<PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
|
||||
<PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
|
||||
<PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
|
||||
<PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
|
||||
input-enable;
|
||||
drive-strength = <MTK_DRIVE_6mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
|
||||
pins-insert {
|
||||
pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
mmc1_uhs_pins: mmc1-uhs-pins {
|
||||
pins-clk {
|
||||
pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
|
||||
drive-strength = <MTK_DRIVE_6mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
||||
};
|
||||
|
||||
pins-cmd-dat {
|
||||
pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
|
||||
<PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
|
||||
<PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
|
||||
<PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
|
||||
<PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
|
||||
input-enable;
|
||||
drive-strength = <MTK_DRIVE_6mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc2_default_pins: mmc2-default-pins {
|
||||
pins-clk {
|
||||
pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
||||
};
|
||||
|
||||
pins-cmd-dat {
|
||||
pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
|
||||
<PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
|
||||
<PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
|
||||
<PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
|
||||
<PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
|
||||
input-enable;
|
||||
drive-strength = <MTK_DRIVE_6mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
|
||||
pins-pcm {
|
||||
pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc2_uhs_pins: mmc2-uhs-pins {
|
||||
pins-clk {
|
||||
pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
||||
};
|
||||
|
||||
pins-cmd-dat {
|
||||
pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
|
||||
<PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
|
||||
<PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
|
||||
<PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
|
||||
<PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
|
||||
input-enable;
|
||||
drive-strength = <MTK_DRIVE_6mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc2_eint_pins: mmc2-eint-pins {
|
||||
pins-dat1 {
|
||||
pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>;
|
||||
input-enable;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc2_dat1_pins: mmc2-dat1-pins {
|
||||
pins-dat1 {
|
||||
pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>;
|
||||
input-enable;
|
||||
drive-strength = <MTK_DRIVE_6mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
};
|
||||
|
||||
panel_default_pins: panel-default-pins {
|
||||
pins-dcdc {
|
||||
pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
pins-en {
|
||||
pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
pins-rst {
|
||||
pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
rt1715_int_pins: rt1715-int-pins {
|
||||
pins_cmd0_dat {
|
||||
pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
spi0_pins: spi0-pins {
|
||||
pins-spi {
|
||||
pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
|
||||
<PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
|
||||
<PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
|
||||
<PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi1_pins: spi1-pins {
|
||||
pins-spi {
|
||||
pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
|
||||
<PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
|
||||
<PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
|
||||
<PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi2_pins: spi2-pins {
|
||||
pins-spi {
|
||||
pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
|
||||
<PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
|
||||
<PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
|
||||
<PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
touch_pins: touch-pins {
|
||||
pins-irq {
|
||||
pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>;
|
||||
input-enable;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pins-reset {
|
||||
pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins: uart0-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
|
||||
<PINMUX_GPIO32__FUNC_I1_URXD0>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
uart1_pins: uart1-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>,
|
||||
<PINMUX_GPIO34__FUNC_I1_URXD1>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
uart2_pins: uart2-pins {
|
||||
pins {
|
||||
pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
|
||||
<PINMUX_GPIO36__FUNC_I1_URXD2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
usb_default_pins: usb-default-pins {
|
||||
pins-iddig {
|
||||
pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pins-valid {
|
||||
pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
pins-vbus {
|
||||
pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>;
|
||||
output-high;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
usb1_default_pins: usb1-default-pins {
|
||||
pins-valid {
|
||||
pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
pins-usb-hub-3v3-en {
|
||||
pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
wifi_pwrseq_pins: wifi-pwrseq-pins {
|
||||
pins-wifi-enable {
|
||||
pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmic {
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
&scp {
|
||||
memory-region = <&scp_mem>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
pinctrl-0 = <&spi2_pins>;
|
||||
pinctrl-names = "default";
|
||||
mediatek,pad-select = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u3phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u3phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u3phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xhci0 {
|
||||
status = "okay";
|
||||
vusb33-supply = <&mt6359_vusb_ldo_reg>;
|
||||
};
|
||||
|
||||
&xhci1 {
|
||||
status = "okay";
|
||||
vusb33-supply = <&mt6359_vusb_ldo_reg>;
|
||||
vbus-supply = <&usb_hub_reset_1v8>;
|
||||
};
|
||||
|
||||
&xhci2 {
|
||||
status = "okay";
|
||||
vusb33-supply = <&mt6359_vusb_ldo_reg>;
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user