Minimal device trees for the M3 Pro based 14-inch and 16-inch MacBook
Pro released in November 2023. The M3 Pro is a distinct SoC design and
not a cut down version of the Max variant like for M1 and M2 Pro.
The M3 Pro has only a single cluster with up to 6 performance cores and
one cluster with 6 efficiency cores.
While it no longer shares a common SoC .dtsi the devices itself are
still similar to the ones with M3 Max. It is still useful to share the
basic device composition in t603x-j514-j516.dtsi. For the M3 Pro based
devices additional overrides for diverging pin and irq numbers are
expected.
The device trees have devices nodes for CPU cores, timer, interrupt
controller, power states, watchdog, serial, pin controller, i2c,
PWM based keyboard LED illumination and the boot framebuffer.
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
Contains minimal device trees for all M3 Max and Ultra Apple silicon
devices. Those are 14-inch and 16-inch MacBook Pros with M3 Max released
in November 2023 and Mac Studio with M3 Ultra released in 2025.
This does not include M3 Pro since it is separate SoC and not a smaller
variant of the M3 Max contrary to the M1 and M2 generations.
The smaller M3 Max variant (10 performance cores) has its own chip
variant (T6034) but is clearly the same design as T6031. Besides fewer
CPU performance cores and GPU cores it misses also on fourth of the
memory controllers and thus has an aggregated bus width of 384 bit
instead of 512 bit.
Both M3 Ultra variants (28 or 32 CPU cores) are based on T6031 judging
by the advertised memory bandwidth of 819GB/s.
This uses the same multi-die macros as t600x*.dtsi and t602x.dtsi to
support M3 Max and M3 Ultra without duplicating device nodes. Since the
M3 Pro can't use the same .dtsi files "t6031*.dtsi" are used to define
common nodes for T6031, T6032 and T6034.
The device trees have devices nodes for CPU cores, timer, interrupt
controller, power states, watchdog, serial, pin controller, i2c,
PWM based keyboard LED illumination and the boot framebuffer.
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
Add minimal device trees for all t8122 based devices. The devices are
- iMac (24-inch, M3, 2023)
- MacBook Air (13-inch, M3, 2024)
- MacBook Air (15-inch, M3, 2024)
- MacBook Pro (14-inch, M3, 2023)
The device trees have a minimal set of devices limited to CPU cores,
interrupt controller, power states, watchdog, serial, pin controller,
i2c and the boot framebuffer.
The device trees for the notebooks add a PWM controller for the keyboard
LED illumination.
The iMacs and the 14-inch device trees add the i2c based Apple cd321x
USB Type-C port controller.
Co-developed-by: Michael Reeves <michael.reeves077@gmail.com>
Signed-off-by: Michael Reeves <michael.reeves077@gmail.com>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260507-apple-m3-initial-devicetrees-v3-5-ca07c81b5dc7@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
The M2 Ultra in the Mac Pro differs from the M2 Ultra Mac Studio in its
PCIe setup. It uses all available 16 PCIe Gen4 on the first die and 8
PCIe Gen4 lanes on the second die to connect to a 100 lane Microchip
Switchtec PCIe switch. All internal PCIe devices and the PCIe slots are
connected to the PCIe switch.
Each die implements a PCIe controller with a single 16 or 8 lane port.
The PCIe controller is mostly compatible with existing implementation
in pcie-apple.c.
The resources for other 8 lanes on the second die are used to connect
the NVMe flash with the controller in the SoC.
This initial device tree does not include PCIe support.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Add device trees for the M2 Pro Mac mini and the M2 Max and Ultra
Mac Studio. These devices are very similar to the M1 Max and Ultra
Mac Studio so reuse the device template, include the .dtsi for the new
SoCs and correct for the minimal differences.
Co-developed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Add device trees for the T6020 and T6021 based Macbook Pros (M2 Pro/Max,
14/16-inch). The devices are very similar to the T6000/T6001 based ones
so reuse the device templates, include the new SoCs and correct for the
minimal differences.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
The 15-inch M2 MacBook Air was released a year after the 13-inch one
thus missed in initial submission of devicetrees for M2 based devices.
It is currently a copy of t8112-j413 with edited identifiers but will
eventually differ in a meaningful way. It has for example a different
speaker configuration than the 13-inch model.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250823-apple-dt-sync-6-17-v2-5-6dc0daeb4786@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
Add DTS files for the T2 SoC and the following devices based on it:
- Apple T2 MacBookPro15,2 (j132)
- Apple T2 iMacPro1,1 (j137)
- Apple T2 MacBookAir8,2 (j140a)
- Apple T2 MacBookAir8,1 (j140k)
- Apple T2 MacBookPro16,1 (j152f)
- Apple T2 MacPro7,1 (j160)
- Apple T2 Macmini8,1 (j174)
- Apple T2 iMac20,1 (j185)
- Apple T2 iMac20,2 (j185f)
- Apple T2 MacBookPro15,4 (j213)
- Apple T2 MacBookPro16,2 (j214k)
- Apple T2 MacBookPro16,4 (j215)
- Apple T2 MacBookPro16,3 (j223)
- Apple T2 MacBookAir9,1 (j230k)
- Apple T2 MacBookPro15,1 (j680)
- Apple T2 MacBookPro15,3 (j780)
The Apple T2 is an A10-based security chip found on some Intel Macs
from 2017 onwards. On models with a touchbar, the touchbar's
display is wired to it. These devices have no offical names, the
naming scheme is from libirecovery.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Add DTS files for the A11 SoC and the following devices based on it:
- iPhone 8
- iPhone 8 Plus
- iPhone X
On A11, Apple has introduced independent performance and efficiency core
clusters, so indicate it in the device tree as well.
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP and m1n1 support, disabled SMC pinctrl]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add DTS files for the A10X SoC and the following devices based on it:
- Apple TV 4K
- iPad Pro (2nd Generation) (10.5 Inch)
- iPad Pro (2nd Generation) (12.9 Inch)
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP, m1n1 and Apple TV 4K support, uart interrupt and pinctrl fixes]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add DTS files for the A10 SoC and the following devices based on it:
- iPhone 7
- iPhone 7 Plus
- iPod touch 7
- iPad 6
- iPad 7
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP, m1n1 and AOP pinctrl support]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add the device tree for the A9X SoC and the devices based on it:
- iPad Pro (9.7 Inch)
- iPad Pro (12.9 Inch) (1st generation)
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP and m1n1 support, uart interrupt and pinctrl fixes]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add DTS files for the A9 SoC and the following devices based on it:
- iPhone 6s
- iPhone 6s Plus
- iPhone SE (2016)
- iPad 5
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP, m1n1 and AOP pinctrl support]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add DTS files for the A8X SoC and the only device based on it, the iPad
Air 2.
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Markuss: System memory bits]
Co-developed-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
[Nick: SMP, m1n1 and gpio-keys support, pinctrl fixes]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add DTS files for the A8 SoC and the following devices based on it:
- iPhone 6
- iPhone 6 Plus
- iPad mini 4
- iPod touch 6
- Apple TV HD
The remaining HomePod is not supported as part of this patch.
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Ivalyo: system memory bits, iPhone 6 gpio-keys, pinctrl]
Co-developed-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
[Nick: SMP and m1n1 support, gpio-keys additions]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add DTS files for the A7 SoC and the following devices based on it:
- iPhone 5s
- iPad Air (1)
- iPad mini 2
- iPad mini 3
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP and m1n1 support, gpio-keys additions]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds device trees for the following devices:
- Macbook Air (M2, 2022)
- Macbook Pro 13" (M2, 2022)
- Mac mini (M2, 2023)
This brings the hardware support of the machines to the same level as M1
and M1 Pro / Max / Ultra. Supported hardware include NVMe, PCIe, serial,
pinctrl/gpio, I2C, iommu, watchdog, admac, nco, cpufreq, boot
framebuffer for laptop panels and the interrupt controller.
The ethernet LAN device on the M2 Mac mini is the only working PCIe
device. The Wlan/BT devices are powered off and controlled by the not
yet supported SMC. The ASMedia xHCI on the M2 Mac mini requires firmware
to be loaded at startup.
The main missing hardware support to make these devices useful are the
integrated USB 2/3/4 controller, keyboard and trackpad on the laptops
and SMC to power the PCIe Wlan/BT device on.
The M2 Mac mini has currently no working display output. Due to changes
in the display pipeline it is currently not possible to initialize the
HDMI output in the bootloader.
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
These are the Mac Studio devices with M1 Max (t6001) and
M1 Ultra (t6002).
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
These are the 14-inch and 16-inch 2021 MacBooks, in both M1 Pro and M1
Max variants (t6000 and t6001).
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds support for following Apple M1 devices:
- MacBook Pro (13-inch, M1, 2020)
- MacBook Air (M1, 2020)
- iMac (24-inch 2021)
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
This currently supports:
* SMP (via spin-tables)
* AIC IRQs
* Serial (with earlycon)
* Framebuffer
A number of properties are dynamic, and based on system firmware
decisions that vary from version to version. These are expected
to be filled in by the loader.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
