Here is the char/misc/iio and other smaller driver subsystem updates for
7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:
- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)
- lots of comedi driver updates and bugfixes
- coresight driver updates
- interconnect driver updates and additions
- mei driver updates
- binder (both rust and C versions) updates and fixes
- lots of other smaller driver subsystem updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaes/Ng8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymRBQCeOqRduhONI6LPIIvDDTaircoSib0AnRD8WwML
RxHo3/WjEd7FEUqwHA+H
=Heza
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / and others driver updates from Greg KH:
"Here is the char/misc/iio and other smaller driver subsystem updates
for 7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:
- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)
- lots of comedi driver updates and bugfixes
- coresight driver updates
- interconnect driver updates and additions
- mei driver updates
- binder (both rust and C versions) updates and fixes
- lots of other smaller driver subsystem updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (405 commits)
coresight: tpdm: fix invalid MMIO access issue
mei: me: add nova lake point H DID
mei: lb: add late binding version 2
mei: bus: add mei_cldev_uuid
w1: ds2490: drop redundant device reference
bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
mei: csc: wake device while reading firmware status
mei: csc: support controller with separate PCI device
mei: convert PCI error to common errno
mei: trace: print return value of pci_cfg_read
mei: me: move trace into firmware status read
mei: fix idle print specifiers
mei: me: use PCI_DEVICE_DATA macro
sonypi: Convert ACPI driver to a platform one
misc: apds990x: fix all kernel-doc warnings
most: usb: Use kzalloc_objs for endpoint address array
hpet: Convert ACPI driver to a platform one
misc: vmw_vmci: Fix spelling mistakes in comments
parport: Remove completed item from to-do list
char: remove unnecessary module_init/exit functions
...
- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaeji/QAKCRBAj56VGEWX
nGHgAP4n7O4oAR9Oik3zKLN095LPpMumqSMTQ8o3TpKzNWql2AEAscjPpRoCGdPA
94CsBVwFYBYkiWd2l5lye7WvK2tNrgI=
=pNNY
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups
* tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (101 commits)
Input: charlieplex_keypad - add GPIO charlieplex keypad
dt-bindings: input: add GPIO charlieplex keypad
dt-bindings: input: add settling-time-us common property
dt-bindings: input: add debounce-delay-ms common property
Input: imx_keypad - fix spelling mistake "Colums" -> "Columns"
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()
Input: ct82c710 - remove driver
Input: mk712 - remove driver
Input: logibm - remove driver
Input: inport - remove driver
Input: qt1070 - inline i2c_check_functionality check
Input: qt1050 - inline i2c_check_functionality check
Input: aiptek - validate raw macro indices before updating state
Input: gf2k - skip invalid hat lookup values
Input: xpad - add RedOctane Games vendor id
Input: xpad - remove stale TODO and changelog header
Input: usbtouchscreen - refactor endpoint lookup
Input: aw86927 - add support for Awinic AW86938
dt-bindings: input: awinic,aw86927: Add Awinic AW86938
...
of effort from Brian Masney. Now the only option is to use determine_rate(),
which is good because that takes a struct argument instead of just a couple
unsigned longs, allowing us to easily modify the way we determine and set rates
in the clk tree.
Beyond that core framework change we've got the typical pile of new SoC clk
driver additions, fixes for clk data and/or adding missing clks because the
consumer driver using those clks wasn't ready, etc. The usual suspects are all
here: Qualcomm, Samsung, Mediatek, and Rockchip along with some newcomers
making RISC-V SoCs like ESWIN's eic700 and Tenstorrent's Atlantis. The clk
driver side of this looks pretty normal.
Core:
- Remove the round_rate() clk op (yay!)
New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for
the Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller
support for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC
-----BEGIN PGP SIGNATURE-----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=RdCb
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after months of effort from Brian Masney. Now the only option is to
use determine_rate(), which is good because that takes a struct
argument instead of just a couple unsigned longs, allowing us to
easily modify the way we determine and set rates in the clk tree.
Beyond that core framework change we've got the typical pile of new
SoC clk driver additions, fixes for clk data and/or adding missing
clks because the consumer driver using those clks wasn't ready, etc.
The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
pretty normal.
Core:
- Remove the round_rate() clk op (yay!)
New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for the
Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller support
for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
clk: visconti: pll: initialize clk_init_data to zero
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
...
* Core:
* Add a resource-managed version of alloc_workqueue() (`devm_alloc_workqueue()`)
* Apple SMC:
* Wire up the Apple SMC power driver by adding a new MFD cell
* Broadcom BCM2835 PM:
* Add support for the BCM2712 power management device
* Introduce a hardware type identifier to distinguish SoC variants
* Intel LPSS:
* Add PCI IDs for the Intel Nova Lake-H platform
* Core:
* Preserve the Open Firmware (OF) node when an ACPI handle is present
* Atmel HLCDC:
* Fetch the LVDS PLL clock as a fallback if the generic sys_clk is unavailable
* EZX PCAP:
* Avoid rescheduling after destroying the workqueue by switching to a device-managed workqueue
* Freescale MC13xxx:
* Fix a memory leak in subdevice platform data allocation by using devm_kmemdup()
* Intel LPC ICH:
* Expose a software node for the GPIO controller cell to fix GPIO lookups
* MediaTek MT6397:
* Correct the hardware CIDs for the MT6328, MT6331, and MT6332 PMICs to allow proper driver
binding
* ROHM BD71828:
* Enable system wakeup via the power button
* STMicroelectronics STPMIC1:
* Attempt system shutdown a second time to handle transient I2C communication failures
* Congatec CGBC, KEMPLD, RSMU, Si476x:
* Fix various kernel-doc warnings and correct struct member names
* DLN2:
* Drop redundant USB device references and switch to managed resource allocations
* Update bare 'unsigned' types to 'unsigned int'
* ENE KB3930:
* Use the of_device_is_system_power_controller() wrapper
* EZX PCAP:
* Drop redundant memory allocation error messages
* Return directly instead of using empty goto statements
* Maxim MAX77705:
* Make the max77705_pm_ops variable static to resolve a sparse warning
* Viperboard:
* Drop redundant USB device references
* SpacemiT P1:
* Drop the deprecated "vin-supply" property from the devicetree bindings
* SpacemiT P1:
* Add individual regulator supply properties to match actual hardware topology
* Maxim MAX77620:
* Convert devicetree bindings from TXT to YAML format
* Document an optional I2C address for the MAX77663 RTC device
* ROHM BD72720:
* Add a new compatible string for the ROHM BD73900 PMIC
* Freescale i.MX25 TSADC:
* Convert devicetree bindings from TXT to YAML format
-----BEGIN PGP SIGNATURE-----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=S0In
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core:
- Add a resource-managed version of alloc_workqueue()
(`devm_alloc_workqueue()`)
- Preserve the Open Firmware (OF) node when an ACPI handle
is present
Apple SMC:
- Wire up the Apple SMC power driver by adding a new MFD cell
Atmel HLCDC:
- Fetch the LVDS PLL clock as a fallback if the generic sys_clk
is unavailable
Broadcom BCM2835 PM:
- Add support for the BCM2712 power management device
- Introduce a hardware type identifier to distinguish SoC variants
Congatec CGBC, KEMPLD, RSMU, Si476x:
- Fix various kernel-doc warnings and correct struct member names
DLN2:
- Drop redundant USB device references and switch to managed
resource allocations
- Update bare 'unsigned' types to 'unsigned int'
ENE KB3930:
- Use the of_device_is_system_power_controller() wrapper
EZX PCAP:
- Avoid rescheduling after destroying the workqueue by switching
to a device-managed workqueue
- Drop redundant memory allocation error messages
- Return directly instead of using empty goto statements
Freescale i.MX25 TSADC:
- Convert devicetree bindings from TXT to YAML format
Freescale MC13xxx:
- Fix a memory leak in subdevice platform data allocation by
using devm_kmemdup()
Intel LPC ICH:
- Expose a software node for the GPIO controller cell to fix
GPIO lookups
Intel LPSS:
- Add PCI IDs for the Intel Nova Lake-H platform
Maxim MAX77620:
- Convert devicetree bindings from TXT to YAML format
- Document an optional I2C address for the MAX77663 RTC device
Maxim MAX77705:
- Make the max77705_pm_ops variable static to resolve a
sparse warning
MediaTek MT6397:
- Correct the hardware CIDs for the MT6328, MT6331, and MT6332
PMICs to allow proper driver binding
ROHM BD71828:
- Enable system wakeup via the power button
ROHM BD72720:
- Add a new compatible string for the ROHM BD73900 PMIC
SpacemiT P1:
- Drop the deprecated "vin-supply" property from the devicetree
bindings
- Add individual regulator supply properties to match actual
hardware topology
STMicroelectronics STPMIC1:
- Attempt system shutdown a second time to handle transient I2C
communication failures
Viperboard:
- Drop redundant USB device references"
* tag 'mfd-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (28 commits)
mfd: core: Preserve OF node when ACPI handle is present
mfd: ene-kb3930: Use of_device_is_system_power_controller() wrapper
mfd: intel-lpss: Add Intel Nova Lake-H PCI IDs
dt-bindings: mfd: max77620: Document optional RTC address for MAX77663
dt-bindings: mfd: max77620: Convert to DT schema
mfd: ezx-pcap: Avoid rescheduling after destroying workqueue
mfd: ezx-pcap: Return directly instead of empty gotos
mfd: ezx-pcap: Drop memory allocation error message
mfd: bcm2835-pm: Add BCM2712 PM device support
mfd: bcm2835-pm: Introduce SoC-specific type identifier
dt-bindings: mfd: bd72720: Add ROHM BD73900
mfd: si476x: Fix kernel-doc warnings
mfd: rsmu: Remove a empty kernel-doc line
mfd: kempld: Fix kernel-doc struct member names
mfd: congatec: Fix kernel-doc struct member names
dt-bindings: mfd: Convert fsl-imx25-tsadc.txt to yaml format
mfd: viperboard: Drop redundant device reference
mfd: dln2: Switch to managed resources and fix bare unsigned types
mfd: macsmc: Wire up Apple SMC power driver
mfd: mt6397: Properly fix CID of MT6328, MT6331 and MT6332
...
A few bindings are already defining a debounce-delay-ms property, so
add it to the input binding to reduce redundant redefines.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260312180304.3865850-2-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support (will cause merge conflicts in
drivers/power/supply/Makefile, but it's a simple fix) These changes
did touch outside of drivers/usb/ but got acks from the relevant
mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaeSx6g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynqjQCgqhbj0Pg2DiL+hZ4xEVlsKD8MJsMAn0vbdsR5
UiYztWABA245P1hO9i+K
=/fxh
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
Extend the max77759 binding to reference power-supply schema, so that
PMIC node can reference its supplier. Also, add regulator property to
control CHGIN (OTG) voltage.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260325-max77759-charger-v9-1-4486dd297adc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document an optional second I2C address for the MAX77663 PMIC's RTC
device, to be used if the MAX77663 RTC is located at a non-default I2C
address.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260312085258.11431-5-clamor95@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Convert max77620 Device Tree bindings from TXT to YAML format. This patch
does not change any functionality; the bindings remain the same. The
thermal bindings are incorporated into the binding. GPIO controller
function in MAX77620 has no dedicated node and is folded into the parent
node itself.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260312085258.11431-4-clamor95@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD79300 is almost identical to the BD72720. Main differences
are the initial values for some of the registers. Thus, it appears the
BD79300 can be handled with same software as BD72720.
Adding the compatible for the BD79300 enables people to use the real IC
type in the device-tree instead of claiming it is BD72720. This does
also help differentiating the ICs if appears it is needed.
Add own compatible for the BD73900 and mark BD72720 as a fall-back.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/6eaa9f08848c27c462e156e31ae5bdfd33bf2fe7.1771938507.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Convert fsl-imx25-tsadc.txt to yaml format.
Additional changes:
- Add ranges.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260211-yaml_mfd-v1-2-05cb48bc6f09@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add supply properties that match the P1 PMIC's actual hardware topology
where each buck converter has its own VIN pin and LDO groups share
common input pins. Supply names are defined according to the pinout
names in the P1 datasheet.
The existing "vin-supply" is dropped from the binding document as the
updated spacemit P1 driver no longer parses it. Only the per-rail names
("vin1-supply", "vin2-supply", ...) are supported.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20260206-spacemit-p1-v4-1-8f695d93811e@riscstar.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add clock and reset bindings for EN751221 as well as a "chip-scu" which is
an additional regmap that is used by the clock driver as well as others.
This split of the SCU across two register areas is the same as the Airoha
AN758x family.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For the PMIC5-Gen3 type PMICs, ADC peripheral is present in HW for the
following PMICs: PMK8550, PM8550, PM8550B and PM8550VX PMICs.
It is similar to PMIC5-Gen2, with SW communication to ADCs on all PMICs
going through PBS(Programmable Boot Sequence) firmware through a single
register interface. This interface is implemented on SDAM (Shared
Direct Access Memory) peripherals on the master PMIC PMK8550 rather
than a dedicated ADC peripheral.
Add documentation for PMIC5 Gen3 ADC and update SPMI PMIC bindings to
allow ADC5 Gen3 as adc@ subnode.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add supply properties that match the P1 PMIC's actual hardware topology
where each buck converter has its own VIN pin and LDO groups share
common input pins. Supply names are defined according to the pinout
names in the P1 datasheet.
The existing "vin-supply" is dropped from the binding document as the
updated spacemit P1 driver no longer parses it. Only the per-rail names
("vin1-supply", "vin2-supply", ...) are supported.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20260206-spacemit-p1-v4-1-8f695d93811e@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- New Support & Features
* Add comprehensive support for the ROHM BD72720 PMIC, including core MFD, regulator, GPIO,
clock gate, RTC, and power-supply drivers.
* Add support for the Rockchip RK801 PMIC, including core MFD and regulator drivers.
* Add support for the ROHM BD73900 PMIC by leveraging existing common drivers.
* Wire up RTC, hwmon, and input sub-devices for the Apple SMC (macsmc) driver.
* Add support for the Delta Networks TN48M switch CPLD via the simple-mfd-i2c driver.
* Add support for the TS133 variant to the QNAP MCU driver.
* Provide support for the sama7d65 XLCD controller in the Atmel HLCDC driver.
* Add backlight sub-device support to the Congatec Board Controller (cgbc).
* Add Intel Nova Lake-S (NVL-S) PCI IDs to the Intel LPSS driver.
- Improvements & Fixes
* Implement a "wrapper regmap" for the ROHM BD72720 to handle dual I2C slave addresses (0x4b and
0x4c) transparently for child devices.
* Introduce mutex locking around 'mfd_of_node_list' in the MFD core to ensure safe concurrent
access.
* Fix a potential regulator resource leak in the Arizona core driver during boot sequence
failures.
* Resolve child device duplication issues on driver rebind for Qualcomm PM8xxx and OMAP USB host
drivers by using of_platform_depopulate().
* Fix IRQ domain name duplication for the Samsung S2MPG10 by adding a unique domain suffix.
* Implement LOCK register handling for the TI TPS65214 variant to unlock registers at probe
time.
* Fully convert the Loongson-2K BMC driver to use managed resources (pcim) and the standard PCI
resource API.
* Ensure the Apple SMC mutex is correctly initialized during probe to prevent NULL pointer
dereferences.
* Expand the ROHM BD71828 power-supply driver to support 9-bit register addresses.
* Simplify the Samsung S5M RTC driver by querying platform device IRQ resources directly.
* Revert an incorrect read-to-write mask change in the DA9052 SPI driver to restore default OTP
behavior.
* Fix kernel-doc warnings in the TI TPS6105x driver.
- Cleanups & Refactoring
* Simplify the MFD core by utilizing the scoped for_each_child_of_node_scoped() macro and
streamlining device_node storage.
* Rename ROHM BD71828 IC-specific entities to use consistent prefixes for better extensibility.
* Refactor ROHM BD71828 regmap definitions using the regmap_reg_range() macro.
* Update the ROHM BD71828 driver to use standard C-style comment headers.
* Remove the now unused 'irq_data' field from the Samsung SEC core structure.
* Drop unnecessary use of irqd_get_trigger_type() in the Maxim MAX77759 driver.
* Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT is selected.
* Add missing charger-related registers to the ROHM BD71828 core header and Type-C CC registers
to the AXP717.
- Device Tree Binding Updates
* Add new bindings for the ROHM BD72720 PMIC, Rockchip RK801 PMIC, Bitmain BM1880 System
Controller, and NXP LPC32xx System Control Block.
* Clarify trickle-charge terminology and add properties for voltage drop (VDR) correction and
upper charge limits to the generic battery binding.
* Document GPR syscon for NXP S32 SoCs and the smp-memram subnode for Aspeed SCU.
* Document numerous new Qualcomm SPMI PMIC compatibles (pmcx0102, pmh0101, pmk8850, etc.).
* Add compatibles for the sama7d65 XLCD (Atmel), LAN9691 Flexcom (Microchip), and various
MediaTek SCPSYS and regulator components.
* Fix a dead link to the audio codec binding in the DA9055 documentation.
-----BEGIN PGP SIGNATURE-----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=BxGL
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- Add comprehensive support for the ROHM BD72720 PMIC, including core
MFD, regulator, GPIO, clock gate, RTC, and power-supply drivers
- Add support for the Rockchip RK801 PMIC, including core MFD and
regulator drivers
- Add support for the ROHM BD73900 PMIC by leveraging existing common
drivers
- Wire up RTC, hwmon, and input sub-devices for the Apple SMC
(macsmc) driver
- Add support for the Delta Networks TN48M switch CPLD via the
simple-mfd-i2c driver
- Add support for the TS133 variant to the QNAP MCU driver
- Provide support for the sama7d65 XLCD controller in the Atmel HLCDC
driver
- Add backlight sub-device support to the Congatec Board Controller
(cgbc)
- Add Intel Nova Lake-S (NVL-S) PCI IDs to the Intel LPSS driver
Improvements & Fixes:
- Implement a "wrapper regmap" for the ROHM BD72720 to handle dual
I2C slave addresses (0x4b and 0x4c) transparently for child devices
- Introduce mutex locking around 'mfd_of_node_list' in the MFD core
to ensure safe concurrent access
- Fix a potential regulator resource leak in the Arizona core driver
during boot sequence failures
- Resolve child device duplication issues on driver rebind for
Qualcomm PM8xxx and OMAP USB host drivers by using
of_platform_depopulate()
- Fix IRQ domain name duplication for the Samsung S2MPG10 by adding a
unique domain suffix
- Implement LOCK register handling for the TI TPS65214 variant to
unlock registers at probe time
- Fully convert the Loongson-2K BMC driver to use managed resources
(pcim) and the standard PCI resource API
- Ensure the Apple SMC mutex is correctly initialized during probe to
prevent NULL pointer dereferences
- Expand the ROHM BD71828 power-supply driver to support 9-bit
register addresses
- Simplify the Samsung S5M RTC driver by querying platform device IRQ
resources directly
- Revert an incorrect read-to-write mask change in the DA9052 SPI
driver to restore default OTP behavior
- Fix kernel-doc warnings in the TI TPS6105x driver
- Cleanups & Refactoring
- Simplify the MFD core by utilizing the scoped
for_each_child_of_node_scoped() macro and streamlining device_node
storage
- Rename ROHM BD71828 IC-specific entities to use consistent prefixes
for better extensibility
- Refactor ROHM BD71828 regmap definitions using the
regmap_reg_range() macro
- Update the ROHM BD71828 driver to use standard C-style comment
headers
- Remove the now unused 'irq_data' field from the Samsung SEC core
structure
- Drop unnecessary use of irqd_get_trigger_type() in the Maxim
MAX77759 driver
- Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT is selected
- Add missing charger-related registers to the ROHM BD71828 core
header and Type-C CC registers to the AXP717
Device Tree Binding Updates:
- Add new bindings for the ROHM BD72720 PMIC, Rockchip RK801 PMIC,
Bitmain BM1880 System Controller, and NXP LPC32xx System Control
Block
- Clarify trickle-charge terminology and add properties for voltage
drop (VDR) correction and upper charge limits to the generic
battery binding
- Document GPR syscon for NXP S32 SoCs and the smp-memram subnode for
Aspeed SCU
- Document numerous new Qualcomm SPMI PMIC compatibles (pmcx0102,
pmh0101, pmk8850, etc)
- Add compatibles for the sama7d65 XLCD (Atmel), LAN9691 Flexcom
(Microchip), and various MediaTek SCPSYS and regulator components
- Fix a dead link to the audio codec binding in the DA9055
documentation"
* tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
dt-bindings: mfd: da9055: Fix dead link to codec binding
mfd: cgbc: Add support for backlight
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs present on Glymur and Kaanapali
dt-bindings: mfd: Document smp-memram subnode for aspeed,ast2x00-scu
mfd: intel-lpss: Add Intel Nova Lake-S PCI IDs
mfd: ls2kbmc: Use PCI API instead of direct accesses
mfd: ls2kbmc: Fully convert to use managed resources
dt-bindings: mfd: mediatek: mt6397: Add missing MT6331 regulator compat
dt-bindings: mfd: mediatek,mt8195-scpsys: Add mediatek,mt6795-scpsys
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,lan9691-flexcom
mfd: omap-usb-host: Fix OF populate on driver rebind
mfd: qcom-pm8xxx: Fix OF populate on driver rebind
dt-bindings: mfd: syscon: Allow syscon compatible for mediatek,mt7981-topmisc
mfd: qnap-mcu: Add driver data for TS133 variant
dt-bindings: mfd: qnap,ts433-mcu: Add qnap,ts133-mcu compatible
mfd: sec: Fix IRQ domain names duplication
mfd: simple-mfd-i2c: Add Delta TN48M CPLD support
mfd: macsmc: Initialize mutex
dt-bindings: mfd: nxp: Add NXP LPC32xx System Control Block
mfd: Kconfig: Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT
...
DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system controllers,
Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI WT61P803 PUZZLE, Delta
Electronics DPS-800-AB power supply, Infineon IR35221 Digital
Multi-phase Controller, Infineon PXE1610 Digital Dual Output 6+1
VR12.5 & VR13 CPU Controller, socionext,uniphier-smpctrl, and
xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files. These
are mostly for arm64 platforms which is getting closer to be warning
free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers
-----BEGIN PGP SIGNATURE-----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=RE7t
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a single
real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use devres
consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio driver
along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x and
add more models to the list of supported variants
-----BEGIN PGP SIGNATURE-----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=Zhuy
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"
* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...
Merge series from André Draszik <andre.draszik@linaro.org>:
This series extends the existing S2MPG10 PMIC driver to add support for
the regulators, and adds new S2MPG11 core and regulator drivers.
The patches are kept together in one series, due to S2MPG11 and its
regulators being very similar to S2MPG10.
The Samsung S2MPG11 PMIC is a Power Management IC for mobile
applications with buck converters, various LDOs, power meters, and
additional GPIO interfaces. It typically complements an S2MPG10 PMIC in
a main/sub configuration as the sub-PMIC and both are used on the
Google Pixel 6 and 6 Pro (oriole / raven).
A DT update for Oriole / Raven to enable these is required which I will
send out separately.
The simple audio codec bindings were consolidated into
trivial-codec.yaml by commit 4acbfcf11c ("ASoC: dt-bindings:
consolidate simple audio codec to trivial-codec.yaml").
Update the DA9055 binding documentation to reference the new
trivial-codec.yaml location.
Signed-off-by: Soham Metha <sohammetha01@gmail.com>
Link: https://patch.msgid.link/20260126111309.22097-1-sohammetha01@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Samsung S2MPG11 PMIC is similar to the existing S2MPG10 PMIC
supported by this binding, but still differs enough from it to justify
a separate binding.
It is a Power Management IC for mobile applications with buck
converters, various LDOs, power meters, NTC thermistor inputs, and
additional GPIO interfaces and typically complements an S2MPG10 PMIC in
a main/sub configuration as the sub-PMIC.
Like S2MPG10, communication is via the Samsung ACPM firmware and it
therefore needs to be a child of the ACPM firmware node.
Add the PMIC, the regulators node, and the supply inputs of the
regulator rails, with the supply names matching the datasheet.
Note: S2MPG11 is typically used as the sub-PMIC together with an
S2MPG10 PMIC in a main/sub configuration, hence the datasheet and the
binding both suffix the supplies with an 's'.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-6-3b1f9831fffd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Update the regulators node to link to the correct and expected
samsung,s2mpg10-regulators binding, in order to describe the regulators
available on this PMIC.
Additionally, describe the supply inputs of the regulator rails, with
the supply names matching the datasheet.
While at it, update the description and example slightly.
Note: S2MPG10 is typically used as the main-PMIC together with an
S2MPG11 PMIC in a main/sub configuration, hence the datasheet and the
binding both suffix the supplies with an 'm'.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-5-3b1f9831fffd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The samsung,s2mpg10-pmic binding is going to acquire various additional
properties. To avoid making the common samsung,s2mps11 binding file too
complicated due to additional nesting, split s2mpg10 out into its own
file.
As a side-effect, the oneOf for the interrupts is not required anymore,
as the required: node is at the top-level now.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-4-3b1f9831fffd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Realtek system controllers are already in use with only generic
'"syscon", "simple-mfd"' compatibles and are missing specific
compatibles as required. Add a schema with specific compatibles. The
labels used in .dts files serve as the basis for the names.
It's doubtful the child nodes upstream are complete and I don't have
documentation, so the specific child nodes aren't documented here. Of
the ones in use, bindings already exist for them.
Link: https://patch.msgid.link/20251215212624.3319681-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add the IEI WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED
drivers. A new vendor prefix is also added accordingly for
IEI Integration Corp.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patch.msgid.link/20210824124438.14519-2-luka.kovacic@sartura.hr
[robh: fix warnings from current tools]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document compatibles for the pmcx0102, pmh0101, pmh0104, pmh0110, pmk8850
and smb2370 SPMI PMICs.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251216-knp-pmic-mfd-v3-1-9d0cd62676d9@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
The platform initialisation code for the AST2600 implements the custom
SMP bringup protocol, and searches for the relevant compatible. As a
consequence, define the requisite node and the compatible string, which
in-turn tidies up the dtb check results.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260109-dev-dt-warnings-mfd-v1-1-1aabe37e9a14@codeconstruct.com.au
Signed-off-by: Lee Jones <lee@kernel.org>
Add the missing mediatek,mt6331-regulator in the compatible string
list for the regulators subnode.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260113110000.36953-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add binding documentation for Microchip LAN969x.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://patch.msgid.link/20251229184004.571837-3-robert.marko@sartura.hr
Signed-off-by: Lee Jones <lee@kernel.org>
Commit a95419ff9f ("dt-bindings: mfd: syscon: Add mt7981-topmisc")
added the mediatek,mt7981-topmisc compatible to the `select` block
which is used only for compatibility with older dtschema, but did
not add it in the actual block allowing to specify the "syscon"
fallback compatible, which is required for such node to do anything
meaningful in the end.
Add the mediatek,mt7981-topmisc compatible in the right list to
allow specifing compatible = "mediatek,mt7981-topmisc", "syscon"
in the relevant devicetree node.
Fixes: a95419ff9f ("dt-bindings: mfd: syscon: Add mt7981-topmisc")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109114356.36454-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
The same MCU is used on a number of devices, each with a slightly
different set of features, like the number of LEDs.
Add a compatible for the MCU used in the TS133 variant.
This is the 1-disk consumer variant of the RK356x-based family.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260104173310.2685852-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
NXP LPC32xx SoC series contains a System Control Block, which serves for
a multitude of purposes including clock and power management, DMA muxing,
storing SoC unique ID etc.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251231215754.2222308-2-vz@mleia.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add the already in use Bitmain BM1880 System Controller binding. All the
child nodes already have schemas.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215212639.3320085-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add LCD compatible string for sama7d65.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/20251218040521.463937-1-manikandan.m@microchip.com
Signed-off-by: Lee Jones <lee@kernel.org>
The NXP S32 SoCs have a GPR region which is used by a variety of
drivers. Some examples of the registers in this region are:
* DDR_PMU_IRQ
* GMAC0_PHY_INTF_SEL
* GMAC1_PHY_INTF_SEL
* PFE_EMACS_INTF_SEL
* PFE_COH_EN
* PFE_PWR_CTRL
* PFE_EMACS_GENCTRL1
* PFE_GENCTRL3
Use the syscon interface to access these registers.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/792d3f59b9f519529b94e673faf70d77c4b61fb3.1765806521.git.dan.carpenter@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add DT binding document for Rockchip's RK801 PMIC
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112124351.17707-2-chenjh@rock-chips.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD72720 is a power management IC integrating regulators, GPIOs,
charger, LEDs, RTC and a clock gate.
Add dt-binding doc for ROHM BD72720.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/44cd4fcb2834ed613dd2d958cf4a4a34b3a316ab.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Subsystem:
- stop setting max_user_freq from the individual drivers as this has not been
hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support
-----BEGIN PGP SIGNATURE-----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=oBij
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support"
* tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: spacemit: MFD_SPACEMIT_P1 as dependencies
rtc: atcrtc100: Fix signedness bug in probe()
rtc: max31335: Fix ignored return value in set_alarm
rtc: gamecube: Check the return value of ioremap()
Documentation: ABI: testing: Fix "upto" typo in rtc-cdev
rtc: Add new rtc-macsmc driver for Apple Silicon Macs
dt-bindings: rtc: Add Apple SMC RTC
MAINTAINERS: drop unneeded file entry in NVIDIA VRS RTC DRIVER
rtc: isl12026: Add id_table
rtc: renesas-rtca3: Add support for multiple reset lines
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
rtc: tegra: Replace deprecated SIMPLE_DEV_PM_OPS
rtc: tegra: Add ACPI support
rtc: tegra: Use devm_clk_get_enabled() in probe
rtc: Kconfig: add MC34708 to mc13xxx help text
rtc: s35390a: use u8 instead of char for register buffer
rtc: nvvrs: add NVIDIA VRS RTC device driver
dt-bindings: rtc: Document NVIDIA VRS RTC
rtc: atcrtc100: Add ATCRTC100 RTC driver
MAINTAINERS: Add entry for ATCRTC100 RTC driver
...
Core changes:
- Handle per-direction skew control in the generic pin config.
- Drop the pointless subsystem boilerplate banner message during
boot. Less noise in the console. It's available as debug message
if someone really want it.
New drivers:
- Samsung Exynos 8890 SoC support.
- Samsung Exynos derived Axis Communications ARTPEC-9 SoC support.
These guys literally live next door to me, ARTPEC spells out
"Axis Real-Time Picture Encoding Chip" and is tailored for camera
image streams and is something they have evolved for a quarter of
a century.
- Mediatek MT6878 SoC support.
- Qualcomm Glymur PMIC support (mostly just compatible strings).
- Qualcomm Kaanapali SoC TLMM support.
- Microchip pic64gx "gpio2" SoC support.
- Microchip Polarfire "iomux0" SoC support.
- CIX Semiconductors SKY1 SoC support.
- Rockchip RK3506 SoC support.
- Airhoa AN7583 chip support.
Improvements:
- Improvements for ST Microelectronics STM32 handling of skew
settings so input and output can have different skew settings.
- A whole bunch of device tree binding cleanups: Marvell Armada and
Berlin, Actions Semiconductor S700 and S900, Broadcom Northstar 2
(NS2), Bitmain BM1880 and Spreadtrum SC9860 are moved over to schema.
-----BEGIN PGP SIGNATURE-----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=/AU5
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The technical details below. For me the CIX Semi and Axis
Communications ARTPEC-9 SoCs were the most interesting new drivers in
this merge window.
Core changes:
- Handle per-direction skew control in the generic pin config
- Drop the pointless subsystem boilerplate banner message during
boot. Less noise in the console. It's available as debug message if
someone really want it
New drivers:
- Samsung Exynos 8890 SoC support
- Samsung Exynos derived Axis Communications ARTPEC-9 SoC support.
These guys literally live next door to me, ARTPEC spells out "Axis
Real-Time Picture Encoding Chip" and is tailored for camera image
streams and is something they have evolved for a quarter of a
century
- Mediatek MT6878 SoC support
- Qualcomm Glymur PMIC support (mostly just compatible strings)
- Qualcomm Kaanapali SoC TLMM support
- Microchip pic64gx "gpio2" SoC support
- Microchip Polarfire "iomux0" SoC support
- CIX Semiconductors SKY1 SoC support
- Rockchip RK3506 SoC support
- Airhoa AN7583 chip support
Improvements:
- Improvements for ST Microelectronics STM32 handling of skew
settings so input and output can have different skew settings
- A whole bunch of device tree binding cleanups: Marvell Armada and
Berlin, Actions Semiconductor S700 and S900, Broadcom Northstar 2
(NS2), Bitmain BM1880 and Spreadtrum SC9860 are moved over to
schema"
* tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
pinctrl: add CONFIG_OF dependencies for microchip drivers
pinctrl: starfive: use dynamic GPIO base allocation
pinctrl: single: Fix incorrect type for error return variable
MAINTAINERS: Change Linus Walleij mail address
pinctrl: cix: Fix obscure dependency
dt-bindings: pinctrl: cix,sky1-pinctrl: Drop duplicate newline
dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Add PCIe RC PERST# group
pinctrl: airoha: Fix AIROHA_PINCTRL_CONFS_DRIVE_E2 in an7583_pinctrl_match_data
pinctrl: airoha: fix pinctrl function mismatch issue
pinctrl: cherryview: Convert to use intel_gpio_add_pin_ranges()
pinctrl: intel: Export intel_gpio_add_pin_ranges()
pinctrl: renesas: rzg2l: Refactor OEN register PWPR handling
pinctrl: airoha: convert comma to semicolon
pinctrl: elkhartlake: Switch to INTEL_GPP() macro
pinctrl: cherryview: Switch to INTEL_GPP() macro
pinctrl: emmitsburg: Switch to INTEL_GPP() macro
pinctrl: denverton: Switch to INTEL_GPP() macro
pinctrl: cedarfork: Switch to INTEL_GPP() macro
pinctrl: airoha: add support for Airoha AN7583 PINs
dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller
...
Apple Silicon Macs (M1, etc.) have an RTC that is part of the PMU IC,
but most of the PMU functionality is abstracted out by the SMC.
An additional RTC offset stored inside NVMEM is required to compute
the current date/time.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewd-by: Mark Kettenis <kettenis@openbsd.org>
Link: https://patch.msgid.link/20251112-macsmc-subdevs-v5-1-728e4b91fe81@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma, brcm,sr-thermal,
amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions Owl SPS, Marvell
AP80x System Controller, Marvell CP110 System Controller,
cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data() helpers
and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the code
to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e. in
a parent node) on nodes without an interrupt. This matches the spec
description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmkwYp0ACgkQ+vtdtY28
YcMS1g/+Mr3pzojHKUEClu3hglNEw1Bvl/rD07s5q+f4d2eayXtRJVBDgKIwYciT
rROXLV9m0Ko2RGiRLHAeB/h4Jjd8NXzLM0GA0YvoHSgtk77xLCuzK5ZEW3o6EoYW
DWVHyoMHDNRRC0Iu+CaS6XId1DrtbV6Wc/oLYvoSJvpdsW9EYOksfrtKQAYU9X5p
/x5XKO4h8RIQTBmg/kjvJLUV6+7cJvOnkF/JkDyh+xOHrIJzQp/bJwcKiU3hGlhX
nGFtjmItNDsFGvR1CtDzUobEE/wgI3xCQHUmufInSNPB7VGw3hbp0nvaQ6htPQQQ
NOA1Q7lXJtqChUZx7OAHk64TQHhVlmJJoy0zCueTgRyjXU0nWb/id2Hn16k96FRh
3YCGArTBFlRriHuCj0fsZ618cLEN2nZCzqSf34HVjs30iP7oLauEJ+WgmfH491TB
eq60Vlwomxq60/hWqCdY1NTCo/zbfYUE+exry69NcL5KSZBN2WGwLPZUgVvYhNO3
dhSgAg+06ib7uq0LLUiokQXaByEEFJt2TxIjp9IDAqkPnvQmDverKL5DZUBHIYxw
E/89Pmm77DagdcIhMocbsdoH5Qu4qH8pdhfR3PL+Ma9drRLxmk3MpiT52VJZem0S
iXHb6fyfQzQ/WJcA4sKapa8EMZRm/9U/pVDx1msDmHfB8pbDEi0=
=ZM/+
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
This hardware block amongst other things includes a multiplexer for a
high-speed Combo-Phy. This binding allows exposing the multiplexer
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251115-openwrt-one-network-v4-1-48cbda2969ac@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
The 'leds' node is missing constraints on additional properties. It is
mixing 'leds' node and child node properties as well as missing some
properties. Add the 'led@' child nodes and the missing properties.
Fixes: 1160f9f88b ("dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251118213541.43812-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The sfrbu on both sama7g5 and sama6d65 both fall back to sama5d2 in
devicetrees, but the former two compatibles were undocumented. Now that
syscon.yaml has easy support for multiple soc-specific compatibles, add
both of these undocumented devices.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251117-marlin-mustang-5ffda4d211c7@spud
Signed-off-by: Lee Jones <lee@kernel.org>
