Add bindings for the Omnivision OV08D10 CMOS image sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add bindings for OmniVision OV2732 image sensor.
Signed-off-by: Walter Werner Schneider <contact@schnwalter.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Allow the orientation and rotation properties from video-interface-devices
to be specified. The sensor can be front or rear facing and can be mounted
at any rotation.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Change from my company email address to gmail.com.
Signed-off-by: Martin Hecht <mhecht73@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The IMX355 camera sensor is a camera sensor that can be found as the
front camera in some smartphones, such as the Pixel 3, Pixel 3 XL, Pixel
3a, and Pixel 3a XL. It already has a driver, but needs support for
device tree. Document the IMX355 to support defining it in device tree.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Aptina MI1040 is a slightly different version of the MT9M114 camera
module. It is used in several devices, such as the ASUS Nexus 7 (2012) and
the ASUS Transformer Prime TF201. The compatible "onnn,mt9m114" is placed
first in the enum, as it is considered the default compatible value.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
DS90UB954-Q1 is an FPDLink-III deserializer that is mostly register
compatible with DS90UB960-Q1. The main difference is that it supports
half of the RX and TX ports, i.e. 2x FPDLink RX ports and 1x CSI TX
port. Therefore, add support for DS90UB954 within the existing bindings.
Link: https://www.ti.com/lit/gpn/ds90ub954-q1
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current bindings duplicate the port definitions for each FPD-Link RX
and CSI-2 TX ports. This results in a large amount of repeated schema
blocks and makes it harder to extend the bindings for new devices.
Refactor the bindings by introducing shared deftinitions for FPD-Link
input ports and CSI-2 output ports. No functional change intended.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system controllers,
Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI WT61P803 PUZZLE, Delta
Electronics DPS-800-AB power supply, Infineon IR35221 Digital
Multi-phase Controller, Infineon PXE1610 Digital Dual Output 6+1
VR12.5 & VR13 CPU Controller, socionext,uniphier-smpctrl, and
xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files. These
are mostly for arm64 platforms which is getting closer to be warning
free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmmNLZEACgkQ+vtdtY28
YcPa+A/+Lpf1FLau//mfndvkzRUvuU5aF3eJdL1FPxfC64Js2cb9ZGSoEK+YDjaV
XzNIi2Z1j+i4+uf5MTvyGaqaVx3PcQBcQtb7pu+W1pt2KiOzfVqn66EmRsY3b4cc
twyOwx2sZMTOZambUfZreWwEl6uJiMowIbcLCsnVWihoiGVTnMpnV/jLcO9jISaP
fe42FX9qN4NL2QqWwcREYuWMuOH7MkHDRNpEhTouWosdmFCp3PkVZcuWv3NKjGMg
/tsH5X9QMr972A9s8Zk36ijvTv7NN+9t1GOtPS9KGpbwJmyPHr38mG1fsj+P0rY7
rOXRnT2PScN6kvKZuw0Rex5xeMxrQCzRkFLzyfq2LOsE0GAUyyR3qysNOdH8xO3Z
3TVMGVaelYw5T+ahie1+gf/H/t+8hGhX3teCo8ORFNYo7oLsA9qNclfd5SW2Acat
pPK80PXkqTRsQ9lVGfytPZJ+m5OhcTIBdI9ieEXk/kryDAL4dHcB2IIVHM2/qm50
aGW0Kh0d61Roe0PZ5GEqI/yWPVHZroXEBxT61tDKwPyGawcq4Gs3Sftd6RXbLi8h
+T6HzkHPZFlKaiLmBC1wqXnEKLd8h72qNjjDdXbRBdLXW6S5hGPtPiLv18ArlmmR
4eiFX1Tr+pUAt2W/IwZb9H84mGkbJODbI62x9k9rst/vLeHmnjs=
=RE7t
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
I2C bus node names are expected to be just "i2c", if there is just one
such node in given example. Replace remaining bad examples with
scripted:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260114081322.53411-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert binding for toshiba,et8ek8 from TXT to YAML format.
Update MAINTAINERS file accordingly. The binding references
video-interface-devices.yaml at top level to inherit flash-leds
property.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Allow properties from video-interface-devices. The change is identical to
commit 08fbd355be ("media: dt-bindings: sony,imx219: Allow props from
video-interface-devices")
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The OV5647 camera sensor takes 3 voltage supplies. So define those in
the bindings as optional regulators, to not break existing users.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Different variants of the ADV7280 chip have up to three register maps.
The availability of the CSI and VPP register maps depends on the chip
variant. The address of the additional register maps depends on the
board design and other chips on the I2C but. They may be programmed via
registers in the main register map.
Allow to specify the addresses of the VPP and CSI register maps in the
device tree to solve I2C address conflicts on a board level.
The CSI and VPP register maps are always optional to allow backwards
compatibility with existing device trees which may rely on the default
address.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add device tree bindings documentation for Samsung S5K3M5 image sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add device tree bindings documentation for Samsung S5KJN1 image sensor.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma, brcm,sr-thermal,
amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions Owl SPS, Marvell
AP80x System Controller, Marvell CP110 System Controller,
cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data() helpers
and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the code
to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e. in
a parent node) on nodes without an interrupt. This matches the spec
description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI
-----BEGIN PGP SIGNATURE-----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=ZM/+
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add bindings for Sony IMX111 CMOS Digital Image Sensor found in LG
Optimus 4X (P880) and Optimus Vu (P895) smartphones.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Switch compatible from a const to an enum to accommodate both the vd55g1
and the vd65g4, which is the color variant.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Convert nxp,tda1997x.txt to yaml format
Additional changes:
- update audio width to 8, 16, 24, 32.
- keep one example only.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Convert ti,tvp5150.txt to yaml format.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
[Sakari Ailus: Align the endpoint properties to the right column.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The sensor requires an external clock, and drivers need to access the
clock to retrieve its frequency in order to configure the sensor. This
makes usage of the clocks property mandatory for a system to work
properly. Mark the clocks and clock-names properties as required, and
update the example accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The sensor requires an external clock, and drivers need to access the
clock to retrieve its frequency in order to configure the sensor. This
makes usage of the clocks property mandatory for a system to work
properly. Mark the property as required.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Usage of the clock-frequency property for camera sensors is discouraged
in favour of using assigned-clock-rates (and assigned-clock-parents
where needed). Drop the property, and update the example accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Usage of the clock-frequency property for camera sensors is discouraged
in favour of using assigned-clock-rates (and assigned-clock-parents
where needed). Mark the property as deprecated.
Update the examples accordingly. In DT examples where the sensor input
clock appears to come from a programmable clock generator, replace
clock-frequency by the assigned-clocks and assigned-clock-rates
properties. Otherwise, just drop clock-frequency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add device tree bindings documentation for OmniVision OG0VE1B camera
sensor.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add device tree bindings documentation for OmniVision OV6211 image
sensor.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Update the IMX258 binding to inherit properties defined in the
video-interface-devices binding.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Olivier Benjamin <olivier.benjamin@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Update the OV8858 binding to inherit properties defined in the
video-interface-devices binding.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Olivier Benjamin <olivier.benjamin@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The MT9M114 supports the different slew rates (0 to 7) on the output pads.
At the moment, this is hardcoded to 7 (the fastest rate).
The user might want to change this values due to EMC requirements.
Add the 'slew-rate' property to the MT9M114 DT-bindings for selecting
the desired slew rate.
Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Deprecate the clock-frequency property in favor of assigned-clock-rates.
While at it, re-order properties according to coding style and fix the
link-frequency in the example. See commit acc294519f ("media: i2c:
imx214: Fix link frequency validation").
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Refer to video-interface-devices.yaml instead of documenting the common
properties here.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()
-----BEGIN PGP SIGNATURE-----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=gMwN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use
of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()"
* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
dt-bindings: timer: Add fsl,vf610-pit.yaml
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
dt-bindings: arm/cpus: Allow 2 power-domains entries
dt-bindings: usb: dwc3-xilinx: allow dma-coherent
media: dt-bindings: sony,imx219: Allow props from video-interface-devices
dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
dt-bindings: trivial-devices: Add VZ89TE to trivial
media: dt-bindings: renesas,vsp1: add top-level constraints
media: dt-bindings: renesas,fcp: add top-level constraints
dt-bindings: trivial-devices: Add Maxim max30208
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
...
Allow properties from video-interface-devices. The change is identical to
commit b6339ecfd0 ("media: dt-bindings: sony,imx290: Allow props from
video-interface-devices")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Link: https://lore.kernel.org/r/20250515142945.1348722-1-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Since commit 98e0500ead ("media: i2c: imx290: Add configurable link
frequency and pixel rate") the driver expects two specific
link-frequency settings 2-lane (445500000, 297000000) and 4-lane
(222750000, 148500000) operation. The driver fails to probe without
these exact settings.
Update the example in the bindings to match this to make it easier for
users to incorporate this sensor in their device tree descriptions
without having to read the driver sources when the driver fails to
probe.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
I recently left WolfVision but would like to continue to maintain the
Sony IMX415 image sensor driver. Update my e-mail address.
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Also update MAINTAINERS file accordingly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add devicetree bindings Documentation for ST VD56G3 & ST VD66GY camera
sensors. Update MAINTAINERS file.
Signed-off-by: Sylvain Petinot <sylvain.petinot@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Extend the ov02e10 bindings yaml to describe the ov02c10 sensor which has
the same bindings with a different compat string and different i2c
address only.
Other differences in sensor capabilities exist but are not expressed in
devicetree.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix typos: 0V02C10 -> OV02C10]
[hverkuil: fix type: Ominivision -> OmniVision]
Convert the Analog Devices ad5820 to DT schema format.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add bindings for OVO2E10 a two lane MIPI CSI, two megapixel 1080p RGB
sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The serializer's I2C address on the FPD-Link bus is usually communicated
to the deserializer once the forward-channel is established. But in some
cases it might be necessary to program the serializer (over the
back-channel) before the forward-channel is established.
This can be used e.g. to correct serializer configuration which
otherwise would prevent the FC to be enabled. To be able to communicate
to the serializer before the forward-channel is up, the deserializer
driver neds to know the default i2c address of the serializer.
Allow setting the serializer i2c address using the 'reg' property. This
is optional, and usually not needed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Append missing vendor and align with other sony definitions.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
