dt-bindings: media: i2c: Add ov2735 sensor

Add bindings for Omnivision OV2735 sensor.

Add MAINTAINERS entry for Omnivision OV2735 binding documentation

Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

Documentation/devicetree/bindings/media/i2c/ovti,ov2735.yaml

@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov2735.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV2735 Image Sensor
+
+maintainers:
+  - Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
+
+description:
+  The OmniVision OV2735 is a 2MP (1920x1080) color CMOS image sensor controlled
+  through an I2C-compatible SCCB bus. it outputs RAW10 format and uses a 1/2.7"
+  optical format.
+
+properties:
+  compatible:
+    const: ovti,ov2735
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XVCLK clock
+
+  avdd-supply:
+    description: Analog Domain Power Supply
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset Pin GPIO Control (active low)
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      Active-low enable pin. Labeled as 'PWDN' in the datasheet, but acts as
+      an enable signal. During power rail ramp-up, the device remains powered
+      down. Once power rails are stable, pulling this pin low powers on the
+      device.
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+              - const: 2
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - avdd-supply
+  - dovdd-supply
+  - dvdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@3c {
+            compatible = "ovti,ov2735";
+            reg = <0x3c>;
+            clocks = <&ov2735_clk>;
+
+            avdd-supply = <&ov2735_avdd>;
+            dovdd-supply = <&ov2735_dovdd>;
+            dvdd-supply = <&ov2735_dvdd>;
+
+            reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+
+            port {
+                cam_out: endpoint {
+                    remote-endpoint = <&mipi_in_cam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <420000000>;
+                };
+            };
+        };
+    };

MAINTAINERS

@@ -18671,6 +18671,13 @@ T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
 F:	drivers/media/i2c/ov2685.c
 
+OMNIVISION OV2735 SENSOR DRIVER
+M:	Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
+M:	Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2735.yaml
+
 OMNIVISION OV2740 SENSOR DRIVER
 M:	Tianshu Qiu <tian.shu.qiu@intel.com>
 R:	Sakari Ailus <sakari.ailus@linux.intel.com>