Add a tdc test case that fills the u32 node ID space with 4095
auto-generated handles, then attempts to add a 4096th. On the fixed
kernel the 4096th filter is rejected with ENOSPC (exit 2). On the
unfixed kernel it silently succeeds with a duplicate handle.
The setup pipes the 4095 add commands directly into `tc -b -` inside a
single bash -c (matching the existing test id 1234 pattern), avoiding
any temp file.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260825081052.133898-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gen_new_kid() falls back to returning max (htid | 0xFFF) when both
idr_alloc_u32() ranges are full, instead of reporting an error.
u32_change() trusts that value and inserts a new knode with a handle
that is already live in the hash table, breaking handle uniqueness
within the table's node ID space.
The handle was never reserved in ht->handle_idr, so every later error
path that does idr_remove(&ht->handle_idr, handle) removes the
reservation of a different, live knode, which is then reused — one
failed add compounds into further duplicates.
The 4095 limit is per (table, bucket) — ht->handle_idr is per hash
table and the range is derived from htid (bucketid), so a table with
divisor 256 can legitimately hold 256*4095 knodes.
The sibling helper gen_new_htid() has the same silent in-band failure:
it returns 0 when the tp_c handle pool (1..0x7FF) is full, and
u32_init() publishes the root hash table with handle 0 without
checking. Two root tables with handle 0 alias in u32_lookup_ht(),
allowing cross-tcf_proto knode add/lookup/delete. Add the same
exhaustion check that the divisor path already has.
Return an error so u32_change() fails with ENOSPC/ENOMEM when the
node ID space is exhausted, and so u32_init() fails with -ENOMEM
when the hash table ID space is exhausted. The extack message
distinguishes pool exhaustion (-ENOSPC) from a transient allocation
failure (-ENOMEM).
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded)
- Create a clsact qdisc on a device, then add 4095 u32 filters with
auto-generated handles to fill the node ID space for the root hash
table (single bucket). The 4096th auto-handle filter add triggers
the duplicate handle (fh 800::fff reused). Reachable at Level 2
(unshare -Urn, namespace-local CAP_NET_ADMIN).
- For gen_new_htid: create 2047 u32 proto entries on the same block
to fill the tp_c handle pool, then create one more. The root table
gets handle 0 and aliases with other handle-0 root tables.
Fixes: 7801db8aec ("net_sched: avoid generating same handle for u32 filters")
Reported-by: vega@nebusec.ai
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260825081052.133898-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selvamani Rajagopal says:
====================
Fix to possible skb leak due to race condtion in tx path
Now the traffic is handled in threaded IRQ, and the
disable_traffic flag is checked before handling the
data, new race condition is exposed, in which
buffer may leak, if threaded IRQ interrupts the
trasmit path midway.
With this change, disable_traffic and waiting_tx_skb
pointer are protected by spin lock/unlock pair.
This is highlighted in Sashiko review
https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260611-level-trigger-v5-0-4533a9e85ce2%40onsemi.com
Also on buffer overrun condition, probably due to loss of
SPI data chunks, receive path doesn't see the expected
data chunk with end_valid bit set. As a result, driver
keeps adding data chunks to the skb before running out
of space and kernel panic is seen.
With this change, before adding data to the skb, if there
is no space, skb is freed and driver starts looking for
new frame by looking for a data chunk with start_valid
bit set.
[ 705.405490] skbuff: skb_over_panic: text:ffffffd2eb72a264 len:1600 put:64 head:ffffff804e5cdc40 data:ffffff804e5cdc80 tail:0x680 end:0x640 dev:eth1
[ 705.405569] ------------[ cut here ]------------
[ 705.405575] kernel BUG at net/core/skbuff.c:214!
[ 705.405589] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 6703.427690] Call trace:
[ 705.925157] skb_panic+0x58/0x68 (P)
[ 705.928726] skb_put+0x74/0x80
[ 705.931772] oa_tc6_update_rx_skb+0x44/0x98 [oa_tc6_mod]
[ 705.937084] oa_tc6_macphy_threaded_irq+0x3f4/0x900 [oa_tc6_mod]
[ 705.943084] irq_thread_fn+0x34/0xb8
[ 705.946654] irq_thread+0x1a0/0x300
[ 705.950134] kthread+0x138/0x150
[ 705.953356] ret_from_fork+0x10/0x20
====================
Link: https://patch.msgid.link/20260824-fix-race-condition-and-crash-v7-0-4323279b18f2@onsemi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Inadvertently bool data type is used where int is supposed to
be used. This might turn a negative error code into true or
false and sign of the return code would be lost.
Fixes: 8f9bf857e4 ("net: ethernet: oa_tc6: implement internal PHY initialization")
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>
Link: https://patch.msgid.link/20260824-fix-race-condition-and-crash-v7-4-4323279b18f2@onsemi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, TX queue interface was stopped when
disable_traffic flag was set, which would indicate fatal
error. It is more appropriate to disable the queue as,
unless driver is unloaded and reloaded, there is no recovery
after disable_traffic is set.
Queues may be re-enabled inadvertently by other layers.
Intention of disable_traffic is only to stop the traffic
from flowing on fatal error.
Fixes: b542d13fab ("net: ethernet: oa_tc6: Interrupt is active low, level triggered.")
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>
Link: https://patch.msgid.link/20260824-fix-race-condition-and-crash-v7-3-4323279b18f2@onsemi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When oversubscribed traffic causes lot of buffer overflow errors,
probably due to loss of data chunks, driver fails to find a
data chunk with end_valid bit set, before it runs out of sk buffer
space. As a result, assert is seen during skb_put.
Now, check is made if skb buffer has enough tailroom for the
incoming data before accepting. If there is no room, current
frame is abandoned and it will start looking for a data chunk
with start_valid bit, that is a new frame.
SK buffer allocation error is considered as recoverable error.
rx_buf_overflow flag is too specific and no longer the only
condition this flag is used for. Therefore it is renamed as
wait_until_start_valid. This is more appropriate as this flag
is used to look for the next data chunk with SV bit set, after
failures like buffer overflow, buffer allocation failure, skb pointer
validity besides buffer overflow error.
Not writing to status0 if it reads 0.
Fixes: d70a0d8f2f ("net: ethernet: oa_tc6: implement receive path to receive rx ethernet frames")
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>
Link: https://patch.msgid.link/20260824-fix-race-condition-and-crash-v7-2-4323279b18f2@onsemi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Threaded IRQ uses waiting_tx_skb. Transmit path also uses this pointer
without any mutual exclusion protection. As a result, it might leak skb
buffer, particularly if threaded IRQ sets disable_traffic true after
start_xmit already checked and found that disable_traffic being false,
if they happen to run on different cores.
On fatal error, where disable_traffic is set, transmit function drops the
packet and return NETDEV_TX_OK. Due to this change, skb_linearize call
is moved up to the beginning of the transmit function.
Since skb buffer may be freed from different contexts, dev_kfree_skb_any
is used to free skb buffer now, replacing one of the kfree_skb call.
oa_tc6_exit disables the irq before setting disable_traffic true.
Fixes: b542d13fab ("net: ethernet: oa_tc6: Interrupt is active low, level triggered.")
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>
Link: https://patch.msgid.link/20260824-fix-race-condition-and-crash-v7-1-4323279b18f2@onsemi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iucv_sock_recvmsg() sends the HiperSockets-only AF_IUCV_FLAG_WIN without
testing the transport, so on a classic z/VM socket iucv_send_ctrl() sizes
the skb through a NULL iucv->hs_dev. SO_MSGLIMIT accepts 1, so msglimit / 2
is zero and one recvmsg() on its own socket is enough for an unprivileged
process to take a spurious disconnect.
It also calls iucv_send_ctrl() under spin_lock_bh(&message_q.lock), which
allocates GFP_KERNEL inside a section the code treats as atomic. Sending
outside that lock lets two recvmsg() reach afiucv_hs_send() at once, where
msg_recv is sampled for the advertised window and subtracted after
dev_queue_xmit() -- and sendmsg reaches that counter under lock_sock()
while recvmsg holds no socket lock, so both can subtract the same value,
the counter goes negative and the credit reaches the peer twice.
Test the transport, claim the credit with atomic_xchg() after the last
error exit and hand it back if the transmit fails, and send once the lock
is dropped.
Fixes: 3881ac441f ("af_iucv: add HiperSockets transport")
Fixes: 238965b71b ("net/af_iucv: build proper skbs for HiperTransport")
Cc: stable@vger.kernel.org
Tested-by: Aswin Karuvally <aswin@linux.ibm.com>
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20260828-b4-disp-33fac0ed-v3-1-e6d061880ee0@proton.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drm_pagemap_evict_to_ram() may retry eviction, but mpages retains
the count from the previous attempt. A retry can therefore continue
to the copy path even when no RAM pages were populated.
Reset mpages at the retry label so it reflects only the current
attempt.
Fixes: 99624bdff8 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260728090304.1264759-1-arvind.yadav@intel.com
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0x750 [ttm]
[10109.861203] ? ttm_bo_alloc_resource+0xa9/0x750 [ttm]
[10109.861208] ? lock_acquire+0xc4/0x2d0
[10109.861214] ttm_bo_validate+0x94/0x1c0 [ttm]
[10109.861218] ? ww_mutex_trylock+0x19d/0x3d0
[10109.861219] ? _raw_write_unlock+0x22/0x50
[10109.861223] ttm_bo_init_reserved+0x17d/0x1f0 [ttm]
[10109.861228] xe_bo_init_locked+0x20a/0x620 [xe]
[10109.861294] ? __pfx_xe_ttm_bo_destroy+0x10/0x10 [xe]
[10109.861359] ? mark_held_locks+0x46/0x90
[10109.861361] ? __create_object+0x68/0xc0
[10109.861366] __xe_bo_create_locked+0x384/0xa20 [xe]
[10109.861432] ? lock_acquire+0xc4/0x2d0
[10109.861434] ? xe_drm_pagemap_populate_mm+0xd3/0x340 [xe]
[10109.861542] xe_bo_create_locked+0x23/0x40 [xe]
[10109.861609] xe_drm_pagemap_populate_mm+0x12e/0x340 [xe]
[10109.861707] ? __lock_acquire+0x43e/0x2930
[10109.861716] drm_pagemap_populate_mm+0x74/0xe0 [drm_gpusvm_helper]
[10109.861720] xe_svm_alloc_vram+0xb5/0x2c0 [xe]
[10109.861817] ? seqcount_lockdep_reader_access.constprop.0+0x9f/0xc0
[10109.861819] ? ktime_get+0x23/0x130
[10109.861821] ? trace_hardirqs_on+0x22/0xe0
[10109.861823] ? seqcount_lockdep_reader_access.constprop.0+0x9f/0xc0
[10109.861826] __xe_svm_handle_pagefault+0x77d/0xbf0 [xe]
[10109.861924] ? rwsem_down_write_slowpath+0x43a/0x9a0
[10109.861926] ? _raw_spin_unlock_irq+0x27/0x70
[10109.861928] ? rwsem_down_write_slowpath+0x43a/0x9a0
[10109.861929] ? trace_hardirqs_on+0x22/0xe0
[10109.861931] ? _raw_spin_unlock_irq+0x27/0x70
[10109.861933] ? rwsem_down_write_slowpath+0x459/0x9a0
[10109.861937] xe_svm_handle_pagefault+0x3d/0xb0 [xe]
[10109.862030] xe_pagefault_queue_work+0x1a9/0x520 [xe]
[10109.862122] process_one_work+0x239/0x730
[10109.862127] worker_thread+0x200/0x3f0
[10109.862130] ? __pfx_worker_thread+0x10/0x10
[10109.862132] kthread+0x10d/0x150
[10109.862133] ? __pfx_kthread+0x10/0x10
[10109.862135] ret_from_fork+0x3bd/0x470
[10109.862138] ? __pfx_kthread+0x10/0x10
[10109.862140] ret_from_fork_asm+0x1a/0x30
[10109.862146] </TASK>
Fixes: 99624bdff8 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Assisted-by: Claude:claude-opus-4-8
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260810092845.2776097-1-arvind.yadav@intel.com
- An unbound worker pool could be freed while still reachable through the
pending-activation list, leading to a use-after-free. Unlink before
dropping the reference.
- On PREEMPT_RT, the BH workqueue kick raised softirqs from preemptible
context, tripping a lockdep assertion and possibly losing concurrently
raised softirq bits.
- Draining BH work off a dead CPU nests two pools' callback locks, which
lockdep misreported as recursive locking. The nesting cannot deadlock.
Annotate it.
- Reject watchdog thresholds that overflow the conversion to jiffies.
- Make the drgn workqueue dump script work again on kernels and vmcores
from before the workqueue attrs field rename.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCapXs/Q4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGd75AP9VTI8d7dor4mn82j7J6l8Xcy8U1ePM/K5v1PqU
n9lfUwD/aopS+dp/uCuqR6pLBxineFAPxNoEgxxO2bDv9OqhoAY=
=fj3U
-----END PGP SIGNATURE-----
Merge tag 'wq-for-7.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- An unbound worker pool could be freed while still reachable through
the pending-activation list, leading to a use-after-free. Unlink
before dropping the reference
- On PREEMPT_RT, the BH workqueue kick raised softirqs from preemptible
context, tripping a lockdep assertion and possibly losing
concurrently raised softirq bits
- Draining BH work off a dead CPU nests two pools' callback locks,
which lockdep misreported as recursive locking. The nesting cannot
deadlock. Annotate it
- Reject watchdog thresholds that overflow the conversion to jiffies
- Make the drgn workqueue dump script work again on kernels and vmcores
from before the workqueue attrs field rename
* tag 'wq-for-7.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
tools/workqueue/wq_dump.py: Support backward compatibility for wq->attrs rename
workqueue: reject watchdog thresholds that overflow jiffies
workqueue: Fix unbound pool lifetime for pending pwqs
workqueue: Use raise_softirq() to trigger softirq in irq_work handler
workqueue: Annotate cb_lock nesting when draining a dead BH pool
- After cgroup.kill was written to a cgroup, every child cloned into it
with CLONE_INTO_CGROUP was spuriously killed because the fork path
snapshotted the kill counter before resolving the target cgroup.
- Releasing an isolated cpuset partition dropped the isolation of CPUs
isolated on the kernel command line.
- Selftest and documentation fixes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCapXm8w4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGbhtAQCfUc4oanF94uiAGzH2UAA2HIorLT4TDjuDj/oM
qrqeLQEA1p2XQz56SYXhK8fG+fy+Ep3xxqS2gStmtYL20ie4lQc=
=i4QU
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-7.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- After cgroup.kill was written to a cgroup, every child cloned into it
with CLONE_INTO_CGROUP was spuriously killed because the fork path
snapshotted the kill counter before resolving the target cgroup
- Releasing an isolated cpuset partition dropped the isolation of CPUs
isolated on the kernel command line
- Selftest and documentation fixes
* tag 'cgroup-for-7.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
selftests/cgroup: test clone3() into a previously killed cgroup
cgroup: fix spurious SIGKILL of CLONE_INTO_CGROUP children
selftests/cgroup: Add test for preserving boot-isolated CPUs
cgroup/cpuset: Preserve boot-isolated CPUs on partition release
selftests/cgroup: Drop invalid boot isolation comparison
docs: cgroup-v2: fix misc.events key format description
selftests/cgroup: Fix cg_run_in_subcgroups ignoring arg parameter
selftests/cgroup: set the test plan after the setup checks
Commit 464e454e1c ("workqueue: rename wq->unbound_attrs to wq->attrs")
renamed wq->unbound_attrs to wq->attrs. When running wq_dump.py against
older running kernels or vmcores where struct workqueue_struct still
contains unbound_attrs, drgn raises an AttributeError.
Add a wq_attrs() helper to allow wq_dump.py to inspect both older and newer
kernel versions seamlessly.
Fixes: 464e454e1c ("workqueue: rename wq->unbound_attrs to wq->attrs")
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- The task ownership check in the dispatch queue move operation raced
against the task exiting or moving to a different sub-scheduler,
spuriously triggering scheduler aborts. Fix by moving the check under
the queue lock.
- The cgroup bandwidth change callback runs in a sleepable context but
sleepable implementations were rejected at load time. Allow them and add
a marker so userspace can detect the capability.
- Sync tooling headers with the scx repo for accumulated compatibility
improvements.
- Example scheduler fixes: ignored timer re-arm failures and vtime credit
loss on cgroup migration.
- Documentation and comment fixes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCapXcug4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGZFfAQCMdpcFMqLdaHkRMiWK+SopQ703AnnpoX9xC81t
vy81mQD/QlIEZimidIS2xju3/HkHfVXX6hHxAbMy8hdclhYHlgM=
=256l
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- The task ownership check in the dispatch queue move operation raced
against the task exiting or moving to a different sub-scheduler,
spuriously triggering scheduler aborts. Fix by moving the check under
the queue lock
- The cgroup bandwidth change callback runs in a sleepable context but
sleepable implementations were rejected at load time. Allow them and
add a marker so userspace can detect the capability
- Sync tooling headers with the scx repo for accumulated compatibility
improvements
- Example scheduler fixes: ignored timer re-arm failures and vtime
credit loss on cgroup migration
- Documentation and comment fixes
* tag 'sched_ext-for-7.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix missing @slice and @vtime descriptions in finish_dispatch() kernel-doc
sched_ext: Fix several comment issues
sched_ext: Check bpf_timer_start return values in scx_qmap
sched_ext: Fix vtime delta loss in scx_flatcg cgroup migration
sched_ext: Fix timer pinning and return value in scx_central
docs/sched_ext: document that cgroup CPU knobs are scheduler-dependent
sched_ext: Fix spurious aborts in scx_bpf_dsq_move() on ownership change races
sched_ext: Sync common and compat headers from the scx repo
sched_ext: Sync tools autogen enum headers from the scx repo
Docs/admin-guide/cgroup-v2: document BPF scheduler callbacks for cpu.max and cpu.idle
sched_ext: Fix nonexistent field in sched-ext.rst example
sched_ext: Allow ops.cgroup_set_bandwidth() to be sleepable
Avoid multiple lookups of the bpffs creator SID using the token's file
descriptor when the same information can be found via the resolved
path/dentry (in selinux_bpf_token_create()) or the token itself (in
selinux_bpf_map_create() and selinux_bpf_prog_load()). Not only does
this simplify the code, it avoids potential TOCTOU issues if the user
changes the token file descriptor passed into the kernel.
Cc: stable@vger.kernel.org
Fixes: 5473a722f7 ("selinux: add support for BPF token access control")
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
wait_on_bit_timeout() returns 0 if the bit was cleared, -EINTR if the
process received a signal and the mode permitted wake up on that signal,
or -EAGAIN if the timeout elapsed. It never returns 1.
Hence the check "err == 1" in mrvl_load_firmware() is dead code: when
the waiting task is interrupted by a signal (-EINTR), the code falls
into the "else if (err)" branch and misreports it as "Firmware request
timeout" with -ETIMEDOUT instead of propagating -EINTR.
Fix this by testing for -EINTR so that an interrupted firmware load is
properly detected and reported.
Fixes: 162f812f23 ("Bluetooth: hci_uart: Add Marvell support")
Signed-off-by: Gongwei Li <ligongwei@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_ecred_defer_connect() clears FLAG_DEFER_SETUP also for channels
with different PID/PSM, which will not be added to the same
ECRED_CONN_REQ in any case. Consequently, only one ECRED connection
group can work at a time although it appears intended they would be
separate for each PID/PSM combination.
Fix by clearing FLAG_DEFER_SETUP only for the connections that could be
added in the request. Retain test_bit(FLAG_DEFER_SETUP) before calling
get_peer_pid as it may be NULL otherwise.
Fixes: da49b602f7 ("Bluetooth: L2CAP: Use DEFER_SETUP to group ECRED connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_connect() tries to ensure there are no more than
L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the
same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs.
However, the check only counts deferred channels. If 6 L2CAP sockets
are connected at the same time in order DDDDND (D=deferred,
N=non-deferred), the last can bump the total to max+1. It results to
one __le16 written out of bounds of the scid array, and an invalid
ECRED_CONN_REQ being sent.
Fix by leaving room for the non-deferred pending ECRED channels in the
counting in l2cap_chan_connect(), so the limit can't be exceeded.
Move counting under same critical section where the channel is added.
Although race conditions involving this appear unreachable, it's easier
to see.
Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this
less brittle.
Fixes: da49b602f7 ("Bluetooth: L2CAP: Use DEFER_SETUP to group ECRED connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_new_connection() sets default value of channel mode to match the
parent channel. l2cap_le_connect_req() left this at the default, and
created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that
mode. This causes FLAG_DEFER_SETUP channels to reply to
L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect.
It can also result to stack OOB write (of l2cap_alloc_cid determined
values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not
limit maximum number of deferred channels or check for duplicate ident.
Fix by setting chan->mode correctly in l2cap_le_connect_req().
Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE
instead of OOB write to make it less brittle.
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In hci_register_dev(), the power_on work item is queued to
hdev->req_workqueue before initializing hdev->adv_monitors_idr and
registering the MSFT extension via msft_register(). For devices marked with
quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on
the device. When the power_on work item runs concurrently on another CPU,
hci_power_on() detects that the device is unconfigured and immediately
invokes hci_dev_do_close(), which calls msft_do_close().
Concurrently, msft_register() allocates the msft structure and exposes it
to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If
msft_do_close() executes while hdev->msft_data is already assigned but the
mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates
on an uninitialized mutex, triggering a DEBUG_LOCKS warning:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common
kernel/locking/mutex.c:625 [inline]
WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550
kernel/locking/mutex.c:821
...
Call Trace:
<TASK>
msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693
hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522
hci_dev_do_close net/bluetooth/hci_core.c:499 [inline]
hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937
process_one_work kernel/workqueue.c:3322 [inline]
process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405
worker_thread+0x92d/0xe10 kernel/workqueue.c:3486
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Fix this by moving the queue_work() call in hci_register_dev() to after
idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device
structures and extensions are fully initialized before asynchronous tasks
can access them. Additionally, assign hdev->msft_data in msft_register()
only after mutex_init(&msft->filter_lock) has completed.
Fixes: 9e14606d8f ("Bluetooth: msft: Extended monitor tracking by address filter")
Assisted-by: Gemini:gemini-3.7-flash Gemini:gemini-3.1-pro-preview syzbot
Reported-by: syzbot+14ce1b05b7d5a989abbe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=14ce1b05b7d5a989abbe
Link: https://syzkaller.appspot.com/ai_job?id=2bc9e8aa-ca6d-43e2-be2c-fd5d9f649d7e
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCapUNuQAKCRBcsMJ8RxYu
Y/QVAX9SDXNSP3dw04wAuYgwSH5Ftm+WAnwusAsSvJkQdTvU0nEpAHyjb6WokS5a
EbOGy5UBfRyqJFOmOw6wF5Ax0Aoxrt+lN8CuoDoh6aEhtYlh0jvd50ustYX8QSas
W2R9B6IFIw==
=JWP4
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-7.3-rc2' of gitolite.kernel.org:/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"This contains a few fixes for the zoned storage support, a possible
deadlock vector fix, some code refactoring patches and a quota evasion
fix on XFS while exporting it via NFS.
Please note that for the quota evasion fix, a couple patches for the
capability subsystem are included in the pull request. Those have been
ack'ed by the respective maintainer which also agreed to have them
going through the xfs tree.
This also includes a patch for the quota subsystem to stop issuing
audit messages during quota enforcing. Quota maintainer also ack'ed
and agreed with this going through xfs tree"
* tag 'xfs-fixes-7.3-rc2' of gitolite.kernel.org:/pub/scm/fs/xfs/xfs-linux:
capability: unexport has_capability_noaudit
xfs: replace ns_capable_noaudit
quota: Don't issue audit messages on quota enforcing
capability: Add new capable_noaudit
xfs: fix capability check in xfs
xfs: restore bi_bdev in xfs_zone_gc_write_chunk
xfs: split ioend handling into a separate source file
xfs: factor out a xfs_iomap_set_anon_write helper
xfs: fix zoned write iomap flags assignments
xfs: fix racy open zone caching
xfs: handle NULL open_zone for merged ioends in xfs_ioend_put_open_zones
xfs: use inode_init_always_gfp with __GFP_NOFAIL in xfs_inode_alloc
xfs: remove kmem_to_page()
xfs: don't flush and invalidate internal RT device twice in xfs_shutdown_devices
xfs: split an assert in xfs_trans_log_buf
xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf
btintel_read_version_tlv() ignores the parser return value, so setup
continues with partially initialized version data after a malformed TLV
causes parsing to stop.
Return the parser error to the caller so an invalid response fails setup
instead of being treated as successful. Keep this behavioral change
separate from the bounds checks so it can be reverted independently if
an existing controller sends malformed data.
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Reviewed-by: Ali Ahmet Memis <ali@iusegentoo.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The firmware ID is treated as a NUL-terminated string even though the
TLV length is its only boundary. If the value does not contain a NUL
terminator, snprintf() can read beyond the received response.
Limit the conversion to the advertised TLV value length.
Fixes: 164c62f958 ("Bluetooth: btintel: Add firmware ID to firmware name")
Reviewed-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
btintel_parse_version_tlv() verifies that a complete TLV is present in
the response, but it does not ensure that the value is long enough for
the specific TLV type. A short value can therefore cause an
out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(),
or memcpy().
Reject values shorter than the minimum required by each known TLV type.
Also reject responses that do not contain the Command Complete Status
field.
Fixes: 57375beef7 ("Bluetooth: btintel: Add infrastructure to read controller information")
Reviewed-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The watchdog threshold is supplied in seconds but is multiplied by HZ
before being used as a jiffies interval. Reject values that exceed
MAX_JIFFY_OFFSET / HZ so the multiplication cannot wrap and the
time_after() comparisons remain within their supported range.
The check is performed before changing the threshold or watchdog timer.
Zero remains the value used to disable the watchdog.
Fixes: 82607adcf9 ("workqueue: implement lockup detector")
Signed-off-by: Jiacheng Xu <stitch@zju.edu.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 13f1eae3b6 ("sched_ext: Synchronize slice and dsq_vtime
writes") added the slice and vtime parameters to finish_dispatch() but
did not update its kernel-doc, which produces warnings:
Warning: function parameter 'slice' not described in 'finish_dispatch'
Warning: function parameter 'vtime' not described in 'finish_dispatch'
Describe both parameters using the same wording as
dispatch_to_local_dsq(), which receives the same values.
Signed-off-by: Liang Luo <luoliang@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
On spurious interrupt where the TX and RX causes are not set, driver was
not clearing the auto mask which can block all the interrupts. Driver
needs to clear the automask even if no causes are set.
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
monitor_timerfn(), lowpri_timerfn() and round_robin_timerfn() ignore
bpf_timer_start()'s return value: a failed re-arm silently stops the
periodic heartbeat, starving every task parked in LOWPRI_DSQ (lowpri)
or freezing cid rotation (round-robin). Check the returns and raise
scx_bpf_error(), matching the init paths.
Signed-off-by: Wanwu Li <liwanwu@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
fcg_cgroup_move() lost the signed vtime offset across cgroup
migration in the mechanical conversion to time helpers:
time_delta() clamps negative deltas to 0, so a queued task (whose
dsq_vtime is normally behind the source frontier) loses its
accumulated vtime credit and lands exactly at the destination
frontier instead of keeping its relative position. Restore the
wrapping signed subtraction.
Fixes: 62addc6dbf ("sched_ext: Use time helpers in BPF schedulers")
Signed-off-by: Wanwu Li <liwanwu@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
central_timerfn() re-arms the timer with a hardcoded
BPF_F_TIMER_CPU_PIN flag and ignores the return value, defeating
start_central_timer()'s -EINVAL fallback for kernels without the flag
(<6.7): on such kernels the first tick kills the timer permanently
with no diagnostic. Honor timer_pinned and check the return like
the initial arm does.
Fixes: 22a920209a ("sched_ext: Implement tickless support")
Signed-off-by: Wanwu Li <liwanwu@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
When a sink detach occurs while waiting for TX send status, the old
TCPM_SOURCING_VBUS event along with TCPM_VBUS_EVENT and TCPM_CC_EVENT
can be queued in port->pd_events. Because TCPM_SOURCING_VBUS is
evaluated after TCPM_VBUS_EVENT and TCPM_CC_EVENT in
tcpm_pd_event_handler(), a stale TCPM_SOURCING_VBUS event can override
the detach handling and incorrectly set port->vbus_source and
port->vbus_present to true.
Add a state guard to check that the port is either operating as a
Source (tcpm_port_is_source(port)) or in a Fast Role Swap (FRS) state
up to FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED before processing
TCPM_SOURCING_VBUS. Otherwise, discard and log the event.
Log snippet for error condition before fix:
[72792.204955] state change SRC_ATTACHED -> SRC_STARTUP [rev3 NONE_AMS]
[72792.204960] sourcing vbus
[72792.204962] VBUS on
[72792.204970] AMS POWER_NEGOTIATION start
[72792.204974] cc:=4
[72792.205319] state change SRC_STARTUP -> AMS_START [rev3 POWER_NEGOTIATION]
[72792.205325] state change AMS_START -> SRC_SEND_CAPABILITIES [rev3 POWER_NEGOTIATION]
[72792.205332] PD TX, header: 0x11a1
[72792.216911] PD TX complete, status: 2
[72792.216957] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms [rev3 POWER_NEGOTIATION]
[72792.218005] VBUS off
[72792.218013] pending state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED @ 650 ms [rev3 POWER_NEGOTIATION]
[72792.218020] VBUS VSAFE0V
[72792.218024] state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED [rev3 POWER_NEGOTIATION]
[72792.218458] CC1: 2 -> 0, CC2: 0 -> 0 [state SNK_UNATTACHED, polarity 0, disconnected]
[72792.218467] VBUS on --> VBUS left on
[72792.218980] disable vbus discharge ret:0
[72792.235193] Start toggling
After fix:
[ 1195.291691] state change SRC_ATTACHED -> SRC_STARTUP [rev3 NONE_AMS]
[ 1195.291698] sourcing vbus
[ 1195.291700] VBUS on
[ 1195.291707] AMS POWER_NEGOTIATION start
[ 1195.291710] cc:=4
[ 1195.291758] state change SRC_STARTUP -> AMS_START [rev3 POWER_NEGOTIATION]
[ 1195.291794] state change AMS_START -> SRC_SEND_CAPABILITIES [rev3 POWER_NEGOTIATION]
[ 1195.291798] PD TX, header: 0x11a1
[ 1195.297056] PD TX complete, status: 2
[ 1195.297092] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms [rev3 POWER_NEGOTIATION]
[ 1195.297177] VBUS off
[ 1195.297184] pending state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED @ 650 ms [rev3 POWER_NEGOTIATION]
[ 1195.297227] CC1: 2 -> 0, CC2: 0 -> 0 [state SRC_SEND_CAPABILITIES, polarity 0, disconnected]
[ 1195.307469] cc:=2
[ 1195.307544] pending state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED @ 650 ms [rev3 POWER_NEGOTIATION]
[ 1195.307555] Discarding sourcing vbus! Invalid state SRC_SEND_CAPABILITIES
[ 1195.957636] state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED [delayed 650 ms]
[ 1195.957732] disable vbus discharge ret:0
[ 1195.970196] Start toggling
[ 1195.970468] VBUS off
[ 1196.051637] VBUS off
[ 1196.051642] VBUS VSAFE0V
Fixes: 8dc4bd0736 ("usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)")
Cc: stable <stable@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260827-sourcing-vbus-v1-1-9be1aca991a0@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Once cgroup.kill had been written to a cgroup, a stale kill_seq
snapshot (taken in cgroup_css_set_fork() before the target cgroup was
resolved) caused every child subsequently cloned into that cgroup with
clone3(CLONE_INTO_CGROUP) to be SIGKILLed on the spot.
Add a regression test: create a cgroup, kill it while it is empty,
then clone a child into it and check that the child runs and exits
cleanly. On a kernel without the fix, the test fails:
not ok 4 test_cgkill_clone_into_killed
The test is skipped on kernels without clone3() or without
CLONE_INTO_CGROUP.
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Assisted-by: LLM
Signed-off-by: Etienne Perot <eperot@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit b69bb476de ("cgroup: fix race between fork and
cgroup.kill"), the fork path snapshots the kill_seq of the child's
future cgroup into kargs->kill_seq, and cgroup_post_fork() SIGKILLs
the child if that cgroup's kill_seq has changed in the meantime, to
catch forks racing with a cgroup.kill sweep.
For CLONE_INTO_CGROUP, however, the snapshot in cgroup_css_set_fork()
is taken before the target cgroup has been resolved: kargs->cgrp is
always NULL at this point (it is only set at the end of the function).
So the "if (kargs->cgrp)" branch is dead code and the snapshot always
records the kill_seq of the parent's cgroup. cgroup_post_fork() then
compares it with the kill_seq of the target cgroup, so the child gets
SIGKILLed whenever the two cgroups have been killed a different number
of times.
As a result, once cgroup.kill has been written to a cgroup, every
child subsequently cloned into it with clone3(CLONE_INTO_CGROUP) is
killed on the spot, for as long as the cgroup exists: kill_seq is not
exposed to userspace and never resets.
Re-snapshot kill_seq from the target cgroup once it has been resolved,
and drop the dead branch at the early snapshot site.
This does not reopen the race fixed by b69bb476de. For
CLONE_INTO_CGROUP, everything from the snapshot to the check in
cgroup_post_fork() runs with cgroup_mutex held, and kill_seq is
only ever incremented under cgroup_mutex.
tj: Updated the comment above kill_seq to reflect the new serialization
rules as suggested by Shakeel Butt.
Fixes: b69bb476de ("cgroup: fix race between fork and cgroup.kill")
Cc: stable@vger.kernel.org
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Assisted-by: LLM
Signed-off-by: Etienne Perot <eperot@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
CIFSSMBSetEA() copies the caller's extended attribute value into the
SMB request buffer without checking that it fits. The requirement is
stated in the source but was never implemented:
/*BB add length check to see if it would fit in
negotiated SMB buffer size BB */
/* if (ea_value_len > buffer_size - 512 (enough for header)) */
if (ea_value_len)
memcpy(parm_data->list.name + name_len + 1,
ea_value, ea_value_len);
The only bound applied on the way in is in cifs_xattr_set():
#define MAX_EA_VALUE_SIZE CIFSMaxBufSize
...
if (size > MAX_EA_VALUE_SIZE)
CIFSMaxBufSize is the full payload capacity of the buffer, so a value
of exactly that size leaves no room for the SMB header, the TRANS2
parameter block, the fealist header and the EA name that are written
ahead of it in the same object.
SendReceive() already enforces the correct limit on this very length:
if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE)
but it is called after the copy has taken place. An unprivileged
setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte
value writes 16384 bytes starting 345 bytes into a 16588-byte
cifs_request object, ending 141 bytes past it:
BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0
Write of size 16384 at addr ffff888003aa0159 by task init/68
__asan_memcpy+0x3c/0x60
CIFSSMBSetEA+0xabc/0xde0
cifs_xattr_set+0xd3a/0xff0
__vfs_setxattr+0x13e/0x1a0
The buggy address is located 345 bytes inside of
allocated 16588-byte region
Apply SendReceive()'s limit to the assembled request before the copy
rather than after it, and widen the byte counters so the sum cannot
wrap before it is tested.
byte_count is also tested against U16_MAX, because it is stored in the
16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is
raised at module load, where it may be set as high as 1024*127: with a
5-byte EA name and a 65521-byte value, count is exactly U16_MAX while
byte_count is 65556, and cpu_to_le16() would truncate it to 20 and
transmit a frame whose ByteCount does not match its length. Testing
byte_count covers count as well, since byte_count is the larger of the
two and count's only 16-bit consumer is written after this point.
check_add_overflow() is evaluated first so that total_len is assigned
before it is reported.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Yunpeng Tian <shionthanatos@gmail.com>
Reported-by: Mingda Zhang <npczmd@qq.com>
Reported-by: Gongming Wang <gmwgg05@gmail.com>
Reported-by: Qinrun Dai <jupmouse@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Yunpeng Tian <shionthanatos@gmail.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
cifs_do_truncate() flushes dirty pages with filemap_write_and_wait()
and truncates the file on the server, but in the old code both
operations ran without holding i_rwsem or invalidate_lock. A
concurrent buffered write via netfs_perform_write() -- which only
needs i_rwsem shared -- could dirty new pages after the flush but
before the local truncation, and those pages would be silently
discarded by cifs_setsize() -> truncate_pagecache().
Fix by acquiring inode_lock (exclusive i_rwsem) and
filemap_invalidate_lock at the top of cifs_do_truncate(), so the
entire flush-truncate-resize sequence is atomic with respect to:
- buffered writes (blocked by exclusive i_rwsem, since
netfs_start_io_write takes i_rwsem shared),
- read page faults (blocked by exclusive invalidate_lock, since
filemap_fault takes it shared),
- writeback collection (blocked by netfs_wb_begin/netfs_wb_end
around the server truncate and local resize, since
netfs_writepages also acquires the wb lock).
Fixes: 110fee6b9b ("smb: client: fix missing timestamp updates with O_TRUNC")
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Bharath SM <bharathsm@microsoft.com>
Cc: stable@vger.kernel.org
s390 implementation of cpu capacity management infrastructure code does
not do anything different than its common code counterpart. Switch to
common code functions and remove the smp_cpu_*_capacity() functions.
Make s390 code better align with other architectures which utilize
cpu_capacity. No functional changes.
Allow cpu_capacity attributes inside sysfs to accurately reflect cpu
capacity.
ex:
$ cat /sys/devices/system/cpu/cpu0/polarization
vertical:high
$ cat /sys/devices/system/cpu/cpu0/cpu_capacity
1024
$ cat /sys/devices/system/cpu/cpu40/polarization
vertical:low
$ cat /sys/devices/system/cpu/cpu40/cpu_capacity
128
Prior to commit 6bceea7a1e ("arch_topology: Relocate cpu_scale to
topology.[h|c]") cpu_capacity attribute was only available to the common
arch_topology driver's users. Reflect the correct values to the newly
made available attributes.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The pai debug feature is registered with 256 areas, where each area
contains 32 pages. This sums up to a total of 32MiB. The code does not use
any debug exceptions, which means that 255 of those areas are never
used. In addition all existing debug feature calls have a lower level (5)
than the default level (3).
This in turn means that without user interaction the debug feature is
unused.
Reduce the number of areas to 1, and also reduce the number of pages for
the remaining area to 1. Since user interaction is required, the user can
also increase the size of the remaining area, instead of wasting memory by
default.
This reduces the total size of the debug feature to 4KiB.
Fixes: a3f8423622 ("s390/pai_crypto: Add PAI crypto characteristics table for parameters")
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Handle the following scenario:
The kernel protects itself against a very high sampling load and
throttles the sampling using:
perf_event_throttle() --> PMU->stop()
Shortly later the scheduler may terminate the task and removes it from the
CPU. It again calls
PMU->stop()
which results in two invocations of PMU->stop() called back to back.
Protect against this and check the PERF_HES_STOPPED bit on function
entry. If it is already set return.
Clear bit PERF_HES_STOPPED in PMU->start().
Prohibit ioctl(fd, PERF_EVENT_IOC_PERIOD, ...) call for this event.
It sets perf_event::event_limit to a positive value and causes
perf_event_overflow() to invoke pai_stop() call back function when
perf_event::event_limit hits zero. This is not supported because the
sample events CRYPTO_ALL and NNPA_ALL are only taken at schedule out
of a task.
Use list_for_each_entry_safe() for safe iteration over syswide_list
in pai_have_samples().
Fixes: 9f66572f28 ("s390/pai_crypto: Enable per-task and system-wide sampling event")
Fixes: 582cc1b28e ("s390/pai_ext: Enable per-task and system-wide sampling event")
Cc: stable@vger.kernel.org # v6.19+
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When diag324 reports -EBUSY, the error code is
overwritten by the result of copy_to_user() and put_user(). As a result,
the ioctl may incorrectly return success instead of -EBUSY.
Preserve the original diag324 return code and only return -EFAULT when
copying data to userspace fails.
Fixes: 90e6f191e1 ("s390/diag324: Retrieve power readings via diag 0x324")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The length information in the reply is used to copy the key token to
the target buffer. An invalid information in t->len of the reply may
cause an over-read of the target buffer and also a over-write of the
target buffer. To prevent that, check t->len before using it.
As the available space in destination and source buffer is always
larger than the valid length value in the parameter block in the
reply, compare t->len with this (already validated) length
information. As a side effect, this check also prevents buffer
over-read and over-write.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
While report_error_write() checks that the provided buffer is at least
as large as the header struct, but not that it is large enough to
contain the report with the length claimed by report->length. If
user-space provides a short buffer, meaning a larger report->length than
the actually written payload, up to around 4K of kernel data from past
the kmalloc(len + 1) sized buffer allocated in kernfs_fop_write_iter()
will leak into the SCLP report.
However, as the entity processing the SCLP is privileged and able to
access at least the page including the report, this does not leak data
that entity could not access but it is still an out of bounds read and
a malformed error report that should be rejected.
Fixes: 368704a65b ("s390/pci: add report_error attribute")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Unlike kdump, which passes the re-IPL parameter block through os_info,
the stand-alone dump passes it through the IPL parm block address and
checksum in lowcore.
Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not
provide an IPL parameter block. In this case reipl_type_init() selects
IPL_TYPE_UNKNOWN and reipl_block_actual remains NULL. Nevertheless,
dump_reipl_run() unconditionally dereferences it when preparing the
lowcore fields. This may happen to work by chance when address zero
contains readable lowcore data. A zero IPL parameter block address is
then stored in lowcore, causing the stand-alone dumper to enter disabled
wait after completing the dump.
Explicitly store a zero IPL parameter block address and checksum when no
re-IPL parameter block is available. This does not change the behavior:
the stand-alone dumper completes the dump and halts, while valid re-IPL
parameter blocks continue to be handled as before.
Fixes: 099b765139 ("[S390] Automatic IPL after dump")
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might
not provide an IPL parameter block. In this case, reipl_type_init()
selects IPL_TYPE_UNKNOWN, and reipl_block_actual remains NULL.
kdump passes the re-IPL parameter block to the dump kernel through
os_info. Before commit 3b9678472b ("s390/ipl: correct kdump reipl
block checksum calculation"), the os_info entry was added only for
IPL types which initialized reipl_block_actual. That commit moved the
os_info update to machine_crash_shutdown(), making it unconditional. As
a result, set_os_info_reipl_block() dereferences reipl_block_actual for
IPL_TYPE_UNKNOWN. This may happen to work by chance when address zero
contains readable lowcore data and the resulting empty os_info entry is
ignored by the dump kernel.
Skip the os_info update when no re-IPL parameter block is available.
Kdump then collect the dump and reboot without setting re-IPL parameter
block.
Fixes: 3b9678472b ("s390/ipl: correct kdump reipl block checksum calculation")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
ap_device_id::driver_info is not used in the kernel. The structure is
also not part of API/ABI, so the unused member can just be dropped.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Stop KMSAN from complaining about CPACF outputs being uninitialized.
Do not unpoison variable-length parameter blocks: mapping function
codes (like CPACF_KIMD_SHA_256) to lengths will be ugly. So let the
callers do this once the need arises.
Also do not touch cpacf_kma(): this wrapper does not handle cc 1 and
cc2 at the moment and has to be reworked.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Christoph Schlameuss and Alexander Egorenkov reported a data-race
reported by KCSAN when jiffies_64 is read:
==================================================================
BUG: KCSAN: data-race in do_account_vtime / tick_do_update_jiffies64
write to 0x0000016599ea8600 of 8 bytes by interrupt on cpu 6:
tick_do_update_jiffies64+0x140/0x250
=============================================================>
BUG: KCSAN: data-race in do_account_vtime / tick_do_update_ji>
write to 0x0000016599ea8600 of 8 bytes by interrupt on cpu 6:
tick_do_update_jiffies64+0x140/0x250
tick_nohz_handler+0x2e6/0x300
__run_hrtimer+0x156/0x4d0
__hrtimer_run_queues+0xd2/0x150
...
system_call+0x72/0x90
read to 0x0000016599ea8600 of 8 bytes by interrupt on cpu 12:
do_account_vtime+0x7d6/0x860
vtime_flush+0x26/0xe0
update_process_times+0x32/0x160
tick_nohz_handler+0x12a/0x300
...
system_call+0x72/0x90
value changed: 0x00000000ffffaa6c -> 0x00000000ffffaa6d
...
=============================================================>
Problem is that jiffies_64 instead of jiffies is used. Both are at the
same address, but only jiffies is of volatile type, which prevents this
warning.
Change the vtime code so jiffies instead of jiffies_64 is used
everywhere. This addresses also the inconsistency that both jiffies and
jiffies_64 were used in the original patch which introduced this.
Fixes: f341b8dff9 ("s390/vtime: limit MT scaling value updates")
Reported-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
ntfs_filemap_page_mkwrite() calls iomap_page_mkwrite() without holding
mapping->invalidate_lock, so a concurrent truncate or fallocate can be
in the middle of invalidating pagecache and rewriting the runlist while
the write fault maps blocks and dirties the folio. This races with
ntfs_attr_fallocate(), which merges clusters into the in-memory
runlist, drops the runlist lock, and only afterwards zeroes the newly
allocated clusters on disk; and with the punch-hole/insert/collapse
paths that free clusters after truncating the cache.
Per Documentation/filesystems/locking.rst, ->page_mkwrite() must ensure
there are no truncate/invalidate races, "usually mapping->invalidate_lock
is suitable for proper serialization". xfs takes its mmaplock (= the
invalidate_lock rwsem) shared in exactly this path.
Take invalidate_lock shared around iomap_page_mkwrite(). The read-only
fault path is already covered because filemap_fault() itself grabs
invalidate_lock shared on instantiation/read paths; only page_mkwrite
was bypassing it in this driver.
Fixes: 9c87959601 ("ntfs: update file operations")
Cc: stable@vger.kernel.org
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Reviewed-by: Baolin Liu <liubaolin@kylinos.cn>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Co-developed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
