Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code than
removed, which was a nice change. Highlights in this merge request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while, with the only reported
issues being some major merge conflicts. Miguel pointed out some of
these with the Rust tree merge, which is the majority of them. I'll
follow up with a diffstat of the merge resolution I made against your
most recent tree, which works for me.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCao143A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymtUgCeKB62gT1JfA86cg3NDB1opp+10N0An3oBBegQ
IJLqJgK45dTNtMGBwGFV
=68af
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
New driver:
- AMD AXI I3C master controller
Subsystem:
- I3C Common Command Code (CCC) handling improvements, especially around GET
CCCs
- SETAASA device discovery support
- ACPI support for all existing DAA methods like SETDASA, SETNEWDA as well as
I2C devices on I3C bus
- IBI-based wakeup support
Drivers:
- dw: SETAASA support
- mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C controller support,
PIO queue management support for HCI v1.2
- renesas: improve suspend to RAM support, add runtime PM support
-----BEGIN PGP SIGNATURE-----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=77m4
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull I3C updates from Alexandre Belloni:
"A new driver this cycle, for the AMD AXI I3C controller.
There are also new features such as IBI wakeup support, SETAASA device
discovery and ACPI support for the the DAA methods, meaning we can now
communicate with the SPD devices on DDR5 modules.
New driver:
- AMD AXI I3C master controller
Subsystem:
- I3C Common Command Code (CCC) handling improvements, especially
around GET CCCs
- SETAASA device discovery support
- ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
well as I2C devices on I3C bus
- IBI-based wakeup support
Drivers:
- dw: SETAASA support
- mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
controller support, PIO queue management support for HCI v1.2
- renesas: improve suspend to RAM support, add runtime PM support"
* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
i3c: dw: reduce do_daa time if there's no client
i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
i3c: dw: rename "pclk" to "apb" to match dt-binding
i3c: dw: make struct dw_i3c_cmd smaller
i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
i3c: renesas: Don't register devices when ENTDAA times out
i3c: master: dw-i3c-master: fix OD timing for first broadcast
i3c: mipi-i3c-hci: Advertise IBI wakeup capability
i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
i3c: master: Reject IBI requests from non-IBI-capable devices
i3c: master: Add helper to query bus wakeup requirements
i3c: master: Report wakeup events for IBIs
i3c: master: Support IBI-based wakeup capability
i3c: master: Fix potential UAF in i3c_device_match()
i3c: master: Fix potential UAF in i3c_device_uevent()
i3c: Make dev->desc locking assumptions explicit
i3c: master: Fix use-after-free of master->this
...
* New drivers
- Driver for Kandou KB9002 retimer
- Driver for the temp/voltage sensor on PolarFire SoC
- Driver for Eswin EIC7700 PVT sensor
- PMBus:
- Driver for Analog Devices MAX16545/MAX16550 and Volterra VT7505
- Drivers for Monolithic MPQ82D00 and MPQ8646
- Driver for Silergy SQ24860
* Added support to existing drivers
- asus-ec-sensors: Support for ROG STRIX Z390-E GAMING,
ProArt Z690-CREATOR WIFI, ROG STRIX X870E-E GAMING WIFI7 R2,
ROG CROSSHAIR X870E HERO, and ROG Maximus Z790 Hero
- asus_rog_ryujin: Siupport for ROG Ryujin III
- ina2xx: Support for INA232
- k10temp: Per-CCD temperature monitoring for Zen5 Turin
- nct6775: List NCT5585D as supported chip
- nzxt-kraken3: Support for NZXT Kraken 2024 Elite
- sht3x: Support for GXCAS GXHT30
- tmp102: Add device IDs for TMP110 and TMP113
- yogafan: Support for LOQ 15IAX9, XiaoXin Pro 13ARE 2020,
IdeaPad 3 15ALC6, Legion Pro 7 16AFR10H, Yoga Pro 7 14IAH10,
Yoga 7 16ARP8, and Lenovo LOQ 15IAX9
- PMBus:
- max20830: Support for max20830c and max20840c
- max34440: Support for MAX34452, and support for newer version
of max34451
- adm1275: Support for ROHM BD12780 and BD12790
* Other notable changes
- Constify various device attributes
- Remove redundant dev_err() and dev_err_probe() from various drivers
- applesmc: Convert to hwmon_device_register_with_info
- adt7470: Add thermal zone sensor support
- coretemp: Fix core_data leak on CPUs without PTS
- emc1403: Drop hysteresis for low limit temperature
- max6621: Fix various over- and underflow problems
- PMBus:
- Introduce pmbus_read_smbus_i2c_block_data() and use it in
various drivers
- Export and use pmbus_check_and_notify_faults()
- Let PMBus drivers report the supported PMBus revision
* Various other minor fixes and improvements
-----BEGIN PGP SIGNATURE-----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=GFfF
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Kandou KB9002 retimer
- PolarFire SoC temp/voltage sensor
- Eswin EIC7700 PVT sensor
- PMBus:
- Analog Devices MAX16545/MAX16550 and Volterra VT7505
- Monolithic MPQ82D00 and MPQ8646
- Silergy SQ24860
Added support to existing drivers:
- asus-ec-sensors: Support for ROG STRIX Z390-E GAMING, ProArt
Z690-CREATOR WIFI, ROG STRIX X870E-E GAMING WIFI7 R2, ROG CROSSHAIR
X870E HERO, and ROG Maximus Z790 Hero
- asus_rog_ryujin: Siupport for ROG Ryujin III
- ina2xx: Support for INA232
- k10temp: Per-CCD temperature monitoring for Zen5 Turin
- nct6775: List NCT5585D as supported chip
- nzxt-kraken3: Support for NZXT Kraken 2024 Elite
- sht3x: Support for GXCAS GXHT30
- tmp102: Add device IDs for TMP110 and TMP113
- yogafan: Support for LOQ 15IAX9, XiaoXin Pro 13ARE 2020, IdeaPad 3
15ALC6, Legion Pro 7 16AFR10H, Yoga Pro 7 14IAH10, Yoga 7 16ARP8,
and Lenovo LOQ 15IAX9
- PMBus:
- max20830: Support for max20830c and max20840c
- max34440: Support for MAX34452, and support for newer version of
max34451
- adm1275: Support for ROHM BD12780 and BD12790
Other notable changes:
- Constify various device attributes
- Remove redundant dev_err() and dev_err_probe() from various drivers
- applesmc: Convert to hwmon_device_register_with_info
- adt7470: Add thermal zone sensor support
- coretemp: Fix core_data leak on CPUs without PTS
- emc1403: Drop hysteresis for low limit temperature
- max6621: Fix various over- and underflow problems
- PMBus:
- Introduce pmbus_read_smbus_i2c_block_data() and use it in
various drivers
- Export and use pmbus_check_and_notify_faults()
- Let PMBus drivers report the supported PMBus revision
Various other minor fixes and improvements"
* tag 'hwmon-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (110 commits)
hwmon: (emc1403) Drop hysteresis for low limit temperature
hwmon: (coretemp) Fix core_data leak on CPUs without PTS
hwmon: (max6621) fix negative temperature offset and crit readings
hwmon: (max6621) fix temperature clamp range
hwmon: (asus_rog_ryujin) Add ROG Ryujin III White Edition
hwmon: (asus_rog_ryujin) Add ROG Ryujin III support
hwmon: (asus_rog_ryujin) Add per-device configuration
hwmon: (k10temp) Add per-CCD temperature monitoring for Zen5 Turin
hwmon: (tmp102) Add TMP113 device ID
hwmon: (tmp102) Add TMP110 device ID
hwmon: (nct6775) Add NCT5585D to list of supported chips
Documentation: hwmon: (nct6775) Add missing NCT6797D and NCT6798D
hwmon: (emc1403) Add regulator support
hwmon: (emc1403) Convert to use OF bindings
dt-bindings: hwmon: Document SMSC EMC1402/1403/1404/1428
hwmon: (asus-ec-sensors) add ROG STRIX Z390-E GAMING
hwmon: (sysfs) Allow drivers to register const attributes
hwmon: (corsair-psu) Update documentation
hwmon: (core) Use const APIs for the dynamically allocated sysfs attributes
hwmon: (core) Constify device attributes
...
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
-----BEGIN PGP SIGNATURE-----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=4ayG
-----END PGP SIGNATURE-----
Merge tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features, cleanup for 7.3
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
* tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits)
iio: dac: mcp47a1: add support for new device
dt-bindings: iio: dac: add support for mcp47a1
iio: Update email for Maxwell Doose
iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion
iio: light: cm32181: return zero after writing calibscale
iio: flow: add Sensirion SLF3S liquid flow sensor driver
iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
iio: types: add IIO_VOLUMEFLOW channel type
iio: ABI: Encourage differential voltage ABI usage
iio: adc: ltc2378: Add support for LTC2338-18
iio: adc: ltc2378: Enable triggered buffer data capture
iio: adc: ltc2378: Enable high-speed data capture
iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
dt-bindings: iio: adc: Add ltc2378
iio: magnetometer: ak8974: remove conditional return with no effect
iio: light: tsl2583: remove conditional return with no effect
iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper
iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper
iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper
...
- Streamline the x86 MSR handling APIs along the 64-bit
variants, simplifying the interfaces. Removal of the
old APIs is planned for the next cycle, to reduce
churn & integration pain. (Juergen Gross)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=QBg3
-----END PGP SIGNATURE-----
Merge tag 'x86-msr-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MSR updates from Ingo Molnar:
- Streamline the x86 MSR handling APIs along the 64-bit variants,
simplifying the interfaces.
Removal of the old APIs is planned for the next cycle, to reduce
churn & integration pain (Juergen Gross)
* tag 'x86-msr-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/mce: Work around build warning after MSR-interface switch
cpufreq: Stop using 32-bit MSR interfaces
x86/featctl: Stop using 32-bit MSR interfaces
KVM/x86: Stop using 32-bit MSR interfaces
x86/mtrr: Stop using 32-bit MSR interfaces
acpi: Stop using 32-bit MSR interfaces
powercap: Stop using 32-bit MSR interfaces
thermal/intel: Stop using 32-bit MSR interfaces
x86/olpc: Stop using 32-bit MSR interfaces
x86/hyperv: Stop using 32-bit MSR interfaces
hwmon: Stop using 32-bit MSR interfaces
EDAC: Stop using 32-bit MSR interfaces
x86/cpu: Stop using 32-bit MSR interfaces
x86/apic: Stop using 32-bit MSR interfaces
x86/resctrl: Stop using 32-bit MSR interfaces
x86/tsc: Stop using 32-bit MSR interfaces
x86/amd: Stop using 32-bit MSR interfaces
x86/pci: Stop using 32-bit MSR interfaces
x86/hygon: Stop using 32-bit MSR interfaces
x86/mce: Stop using 32-bit MSR interfaces
...
Remove the hysteresis for low temperature limit, in hardware
the hysteresis is applied only to the maxim limit and the
critical limit temperature.
Fixes: 54392ce444 ("hwmon: (emc1403) Add support for min_hyst attributes")
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20260813-emc1403_remove_min_hyst-v1-1-43a0d05d9f49@microchip.com
[groeck: Updated subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
pdata->core_data is allocated in init_temp_data() when the first core
temp_data of a package is created, but it is only released from
destroy_temp_data(), and only in the branch that handles the package
temp_data.
Package temp_data is created solely when the CPU supports
X86_FEATURE_PTS. On a CPU without it, coretemp_cpu_online() never calls
coretemp_add_core() with pkg_flag set, so pdata->pkg_data stays NULL.
coretemp_cpu_offline() then skips the removal of the package interface,
destroy_temp_data() is never called for package data, and the array is
still allocated when coretemp_device_remove() frees the platform data
that pointed at it.
Release the array in coretemp_device_remove(). destroy_temp_data() sets
pdata->core_data to NULL when it frees it, so the added kfree() is a
no-op on CPUs that do have PTS.
Tested on an Intel Core i5-1135G7. The driver was instrumented to log
every allocation and release of pdata->core_data, and the PTS check in
coretemp_cpu_online() was patched out to emulate a CPU without package
thermal support. Without this change the array was allocated and never
released, and coretemp_device_remove() still saw a non-NULL pointer.
With it the array is released and the pointer accounting balances. On an
unmodified build the release still happens via the package temp_data and
the added kfree() sees NULL, with no slab warnings over repeated module
load and unload cycles.
Fixes: 1a793caf6f ("hwmon: (coretemp) Use dynamic allocated memory for core temp_data")
Signed-off-by: Szymon Wilczek <swilczek.lx@gmail.com>
Link: https://lore.kernel.org/r/20260810192344.3733721-1-swilczek.lx@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
max6621_read() reads the CONFIG2 offset and the critical alert threshold
registers into a u32 and scales them without sign extension:
/* offset */ *val = (regval >> MAX6621_REG_TEMP_SHIFT) * 1000L;
/* crit */ *val = regval * 1000L;
Both attributes are writable and their write paths clamp to a negative
minimum and encode negative values, so a value written as negative is read
back as a large positive number. For example, writing a -10 degrees C
offset stores max6621_temp_mc2reg(-10000) = (-10 << 6) = 0xfd80; the read
then computes 0xfd80 >> 6 = 1014 -> 1014000 instead of -10000.
Cast the register value to s16 before scaling so the read preserves the
sign the write path encodes. The temperature input path already uses an s8
intermediate and is left unchanged.
Fixes: 92b64580f1 ("hwmon: (max6621) Add support for Maxim MAX6621 temperature sensor")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Link: https://lore.kernel.org/r/ad0baddbd6163cf73545c8e9273258136718585c.1786334038.git.congnt264@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
MAX6621_TEMP_INPUT_MIN and MAX6621_TEMP_INPUT_MAX are used to clamp the
writable offset and critical thresholds. They are defined as -127000 and
128000.
The driver decodes the temperature through an s8 and its own comment in
max6621_read() documents an 8-bit two's complement value, whose range is
-128 to +127 degrees C. The current limits therefore reject the valid
-128 degrees C and accept +128 degrees C, which does not fit the 8-bit
range.
Correct the limits to -128000 and 127000.
Fixes: 92b64580f1 ("hwmon: (max6621) Add support for Maxim MAX6621 temperature sensor")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Link: https://lore.kernel.org/r/9d3a4f1895a47794bb359a2a32fb1ccd6a15812c.1786334038.git.congnt264@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ROG Ryujin III White Edition uses the same report layout as the
other supported Ryujin III variants. Add its USB device ID and list it
in the driver documentation.
The device was tested with the driver on the author's hardware.
Link: https://github.com/aleksamagicka/asus_rog_ryujin-hwmon/pull/10
Signed-off-by: Will Smith <github@notthatwillsmith.com>
Assisted-by: Codex:gpt-5.6-sol sparse
Signed-off-by: Arie Miller <renari@arimil.com>
Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20260812103532.395049-4-renari@arimil.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ROG Ryujin III uses different report offsets and a different
cooler-duty channel from the Ryujin II. It also lacks the separate
external fan controller supplied with the older model.
Add model data and USB IDs for the Extreme and EVA Edition variants.
Skip controller commands and hide the unavailable controller hwmon
channels for these devices. Update the driver documentation, Kconfig
text, and module description accordingly.
Link: https://github.com/aleksamagicka/asus_rog_ryujin-hwmon/pull/9
Assisted-by: Codex:gpt-5.6-sol sparse
Signed-off-by: Arie Miller <renari@arimil.com>
Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20260812103532.395049-3-renari@arimil.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Move model-specific report offsets and capabilities into a device
information structure. This prepares the driver for coolers which use
a different report layout or do not include the external fan
controller, while preserving the existing Ryujin II 360 behavior.
Handles an issue reported by Sashiko where an id could
be missing driver_data.
Link: https://lore.kernel.org/r/5a817284-a9f4-48b2-9f0f-802c5dc6963c@roeck-us.net
Assisted-by: Codex:gpt-5.6-sol sparse
Signed-off-by: Arie Miller <renari@arimil.com>
Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20260812103532.395049-2-renari@arimil.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for per-CCD temperature monitoring on Zen 5 Turin (EPYC 9005)
CPUs, as they fall into a separate model range with a different offset
and a higher maximum CCD count than their desktop counterparts. As such,
this patch also updates the driver to support CPUs with up to 16 CCDs.
Tested and working on an EPYC 9555P.
Signed-off-by: Gabriel Ford <gabriel@gford.dev>
Link: https://lore.kernel.org/r/20260813170232.3841-1-gabriel@gford.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The TMP113 temperature sensor part is register compatible with TMP102,
add non-DT I2C device ID. Unlike TMP102 and TMP110, the TMP113 does
have additional unique ID registers, those are currently unused.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://lore.kernel.org/r/20260813090456.70816-2-marex@nabladev.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
NCT5585D uses the same chip ID (0xd428) as NCT6798D and is fully
compatible with it. Tested on an ASUS PRIME H610M-D motherboard.
Signed-off-by: Jiazhi Huang <huangjia2hi@163.com>
Link: https://lore.kernel.org/r/20260811093744.12199-3-huangjia2hi@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for VDD power supply for this sensor. It is required on some
devices for the sensor to start up and work properly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20260731113007.145322-4-clamor95@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add OF match compatible table to be able to use this driver with Device
Trees.
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20260731113007.145322-3-clamor95@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ROG STRIX Z390-E GAMING and Z390-F GAMING are essentially the
same board apart from the E's onboard WiFi, so they share the same
EC sensor layout.
Signed-off-by: Rodrigo Araujo <araujo.rm@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20260809212705.1501382-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Switch to the __DEVICE_ATTR() macro which can handle callbacks taking
both const and non-const attribute structure arguments.
Allow the step-wise migration of the drivers.
Also use container_of_const() over container_of() to avoid casting away
the constness accidentally.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20260806-sysfs-const-attr-hwmon-v2-3-22fee8b85509@weissschuh.net
[groeck: Squashed 'hwmon: (core) Constify PEC device attribute']
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add information about the HX1500i 2025 series and fix the missing
HX1500i in Kbuild.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/anVuBd8Bb7T66OUO@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add DMI quirk entries and map correct ACPI paths and configurations for
additional Lenovo laptop models including the LOQ 15IAX9,
XiaoXin Pro 13ARE 2020, IdeaPad 3 15ALC6, Legion Pro 7 16AFR10H,
Yoga Pro 7 14IAH10, and Yoga 7 16ARP8.
Reorder the DMI quirk table to evaluate specific model matches before
generic family fallbacks, preventing DMI shadowing.
Signed-off-by: Sergio Melas <sergiomelas@gmail.com>
Link: https://lore.kernel.org/r/20260806131103.19104-1-sergiomelas@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ADT7470 features four PWM outputs designed to control fans.
Previously, these were only accessible through the legacy hwmon
sysfs interface.
Expose the ADT7470 fan control lines through the generic PWM framework.
This allows generic PWM consumers described in Device Tree, such as
"pwm-fan", to use the device through the "#pwm-cells" property. This is
particularly necessary for boards where the ADT7470 external temperature
sensors are not populated and the chip is used strictly as a fan
controller (e.g., Edgecore ECS-2100-52T switches). In such setups,
delegating control to the generic PWM subsystem allows the kernel's
thermal framework to manage the fans based on unrelated temperature
zones, such as internal SoC sensors.
When a PWM consumer applies a new PWM state, the driver automatically
switches the corresponding PWM channel to manual mode so that the
requested duty cycle takes effect. The duty cycle specified by the PWM
framework is internally converted to the 0-255 scale expected by the
hardware registers.
To prevent conflicting access, the hwmon PWM sysfs attributes are hidden
when the device is registered with PWM framework support (i.e. when
"#pwm-cells" is present in DT and CONFIG_PWM is reachable).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260805-adt7470_thermalzone-v6-3-5605a5f95467@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver uses i2c_smbus_read_i2c_block_data() for PMBus block commands.
Use pmbus_read_smbus_i2c_block_data() instead to enable the driver to work
with I2C controllers which do not support i2c_smbus_read_i2c_block_data().
Drop the functionality check to get an explicit error message if the
required SMBus commands are not supported.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver tries to use both pmbus_read_smbus_i2c_block_data() and
i2c_smbus_read_i2c_block_data() for PMBus block commands.
Use pmbus_read_smbus_i2c_block_data() instead to simplify the code.
Drop the functionality check to simplify the code and to trigger a return
with -EOPNOTSUPP if SMBus block commands are not supported.
Cc: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Cc: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver uses a mix of pmbus_read_smbus_i2c_block_data() and
i2c_smbus_read_i2c_block_data() for PMBus block commands.
Use pmbus_read_smbus_i2c_block_data() instead to enable the driver to work
I2C controllers which do not support both block commands.
Drop the functionality check to simplify the code and to trigger a return
with -EOPNOTSUPP if SMBus block commands are not supported.
As part of this patch, rework detection of LT7170 and LT7171. The return
length of pmbus_read_smbus_i2c_block_data() may be less than the requested
number of bytes, meaning the return length needs to be checked. Also,
checking for "LT7170-1" after checking for "LT7170" and checking for
"LT7171-1" after checking for "LT7171" is pointless since the first check
will already produce a match, so drop the second part of the check.
Cc: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Cc: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver uses i2c_smbus_read_block_data() for PMBus block commands.
Use pmbus_read_smbus_i2c_block_data() instead to enable the driver to work
with I2C controllers which do not support i2c_smbus_read_block_data().
Drop the functionality check to get an explicit error message if the
required SMBus commands are not supported.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
PMBus drivers need support for reading SMBus block data. Unfortunately,
not all i2C controllers support this command.
Implement pmbus_read_smbus_i2c_block_data() which first tries to use
i2c_smbus_read_block_data(). If not supported, try to emulate it by calling
i2c_smbus_read_i2c_block_data(). Export the new function for use in PMBus
drivers.
Cc: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Cc: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The write cases of debugfs entries are provisioning and bench
helpers. By designs the MPQ8646 powers the CPU core rail,
so a wrong write can brown out the board or persist a bad
setpoint into finite-cycle NVM.
Said differently: some wrong register writes can and likely
will physically damage or destroy the chip and/or the board.
To be safe, it is disabled by default behind a
CONFIG_SENSORS_MPQ8646_DEBUG_UNSAFE and we print an explicit warning
banner at probe time when they are built in.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Link: https://lore.kernel.org/r/20260730-mpq8646_v0-v7-4-e7c7ad768d5d@free.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a new driver for the MPS MPQ8646 that is a PMBus device.
Beyond basic PMBus telemetry, the driver adds:
- alarm acknowledge via inX_reset_history.
- STATUS_WORD MPS-extended bit decode and the NVM-backed
PROTECTION_LAST post-mortem, exposed as a read-only debugfs
decoder.
- In-driver alarm-poll fallback work item (thanks lm90) for
boards without SMBALERT
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Link: https://lore.kernel.org/r/20260730-mpq8646_v0-v7-3-e7c7ad768d5d@free.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Factor of pmbus_fault_handler() into an exported helper so
drivers can notify sequence from a polling work item on boards
for which the chip's SMBALERT# pin is not wired to the
CPU. The interrupt handler becomes a thin wrapper.
Like the SMBALERT# path, the helper notifies and then clears the
latched faults unconditionally, so a polling caller inherits exactly
the interrupt semantics.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Link: https://lore.kernel.org/r/20260730-mpq8646_v0-v7-1-e7c7ad768d5d@free.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Replace OF property handling with fwnode in the probe function to read
the channels properties, improving the driver compatibility since this
method is not limited to Device Tree only.
Add also the needed headers for explicit include and clean up related
function naming.
Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
Link: https://lore.kernel.org/r/20260730091409.10544-1-flaviu.nistor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit 554b3529fe ("thermal/drivers/core: Remove the module Kconfig's
option") [1] obviated some of the "Optional dependencies" (as described in
"Documentation/kbuild/kconfig-language.rst") in "drivers/hwmon/Kconfig".
Namely, said commit restricted the valid/possible subset of the full
Cartesian product "CONFIG_THERMAL x CONFIG_THERMAL_OF" to
{ (n, n), (y, n), (y, y) }
through "drivers/thermal/Kconfig". Numerically (using tristate values),
this set can be expressed as:
{ (0, 0), (2, 0), (2, 2) }
Over this set, the "drivers/hwmon/Kconfig" tristate expression
THERMAL || !THERMAL_OF
or equivalently,
max(THERMAL, 2-THERMAL_OF)
invariably evaluates to "y" (2).
Similarly, with THERMAL having been restricted to
{ n, y }
or numerically,
{ 0, 2 }
the "drivers/hwmon/Kconfig" tristate expression
THERMAL || THERMAL=n
or equivalently,
max(THERMAL, THERMAL=0)
invariably evaluates to "y" (2). (Note that "THERMAL=0" returns either "y"
(2) or "n" (0).)
Commit f37353320e ("hwmon/drivers/core: Simplify complex dependency")
[2], which is the final commit of the series that [1] is the beginning of,
cleaned up the hwmon C source code in fact; however, it missed the
now-collapsed dependencies in Kconfig. At the time of [2], six of today's
such dependencies were present in Kconfig. Since then, two more have been
added (such that they persist, anyway): one by commit 4f8d374b77
("hwmon: (max6650) add thermal cooling device capability"), which was
independent of the above-noted series, and another by commit 9855caf5d4
("hwmon: add driver for the hwmon parts of qnap-mcu devices"), which was a
descendant of the series.
Remove these always-"y" dependencies.
Cc: Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Sudeep Holla <sudeep.holla@kernel.org>
Cc: arm-scmi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Laszlo Ersek <laszlo.ersek@arm.com>
Link: https://lore.kernel.org/r/20260729215436.2103380-1-laszlo.ersek@arm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for MAX20830C and MAX20840 step-down DC-DC switching
regulator with PMBus interface. MAX20830C is a different packaging
for MAX20830, and MAX20840C supports 40A regulation compared to
MAX20830 that is only 30A.
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20260730-dev-max20830c-v5-4-a7553f84ee74@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Implement support for external voltage divider scaling using the
adi,vout-rfb1-ohms and adi,vout-rfb2-ohms device tree properties.
When the desired output voltage exceeds VREF, a resistor divider
(RFB1 and RFB2) is used to scale down the feedback voltage. The
driver reads these resistor values from device tree and applies
the scaling formula: VOUT_actual = VOUT_measured × (1 + RFB1/RFB2)
The properties are optional. If not specified, the driver assumes
no voltage divider is present and reports the raw VOUT reading.
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20260730-dev-max20830c-v5-2-a7553f84ee74@analog.com
[groeck: Fixed minor conflicts]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some PMBus chips do not support the PMBUS_REVISION command. Knowing
the PMBUs revision supported by a chip is relevant for PMBUs core
functionality, so add support for letting chip drivers report the PMBUs
revision.
Use the new capability to report the PMBus revision supported by MAX20830.
While at it, add definitions for PMBUs revisons 1.3.1 and 1.4.
Cc: Nuno Sá <nuno.sa@analog.com>
Cc: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Kraken 2024 Elite (USB ID 1e71:3012) is protocol-compatible with the
existing Kraken 2023 devices and works with the current Z53 code paths.
Add its USB product ID and map it to the KRAKEN2023 kind.
Tested on hardware: liquid temperature and pump/fan speeds read
correctly (cross-checked against liquidctl), and PWM control of both the
pump and fan channels works as expected.
Signed-off-by: Sean Lyon <sean@seanlyon.dev>
Link: https://lore.kernel.org/r/20260728031127.26553-1-sean@seanlyon.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a PMBus driver for the Analog Devices MAX16545 and MAX16550, and the
Volterra VT7505 controllers. The driver reports input/output voltage,
input/output current, input power and temperature over PMBus. All values
use the direct data format. Peak input voltage, output voltage, output
current, input power and temperature readings are exposed and can be
reset.
The reported current and power depend on the external current-report
resistor connected to the ILOAD pin, which can be provided through the
"adi,rload-ohms" device tree property.
On the MAX16550 and VT7505, the severe-OCP deglitch time can optionally
be configured with the "adi,ocp-severe-filter-us" device tree property.
When omitted, the existing hardware setting is left unchanged.
Co-developed-by: Dhruva Devineni <ddevineni@juniper.net>
Co-developed-by: Debjit Ghosh <dghosh@juniper.net>
Co-developed-by: JawaharBalaji Thirumalaisamy <jawaharb@juniper.net>
Co-developed-by: Avadhut Naik <avadhutn@juniper.net>
Co-developed-by: Santhanakrishnan Balraj <sbalraj@juniper.net>
Co-developed-by: Brian Mak <makb@juniper.net>
Signed-off-by: Georgi Vlaev <gvlaev@juniper.net>
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260725211945.288415-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Kandou KB9002 is an 8-lane PCIe 5.0 retimer that exposes an SMBus
target with mandatory PEC. Add a hwmon driver reporting the firmware
aggregated maximum die temperature as temp1_input, with the firmware
version and boot status under debugfs.
Signed-off-by: Andy Chung <Andy.Chung@amd.com>
Link: https://lore.kernel.org/r/20260724-kb9002-upstream-v5-3-9523c3ffe83a@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Coverity reports dead code in mp2975_data2reg_linear11(). Code analysis
shows that the parameter passed to the function is always non-negative.
This means that negative values do not need to be handled, and the
associated variable and conditional code can be removed.
No functional impact or change.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver registers ltc4283_of_match as the platform driver's
.of_match_table so the kernel probes the device when a DT node with
compatible "adi,ltc4283" is present, but the corresponding
MODULE_DEVICE_TABLE(of, ...) call is absent.
Without it the module alias table (modules.alias) does not contain an
"of:N*T*Cadi,ltc4283" entry, so udev / kmod cannot auto-load the
module when the DT node appears, breaking modules-based deployments
while built-in configurations happen to work by accident.
Add the missing MODULE_DEVICE_TABLE() to fix module auto-loading.
Fixes: dd63353a0b ("hwmon: ltc4283: Add support for the LTC4283 Swap Controller")
Signed-off-by: surendra <kr494167@gmail.com>
Link: https://lore.kernel.org/r/20260721055022.34629-1-kr494167@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for Maxim MAX34452 PMBus 16-Channel V/I Monitor and
12-Channel Sequencer/Marginer. The device is similar to MAX34451
and shares the same configuration function.
The MAX34452 supports:
- 16 configurable voltage/current monitoring channels
- 5 temperature sensors (pages 16-20)
- Dynamic channel configuration via MFR_CHANNEL_CONFIG
- IOUT average monitoring
Signed-off-by: Carlos Jones Jr <carlosjr.jones@analog.com>
Co-Developed by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20260722-max34451_fixes-v2-3-bbddb18ec1d6@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The MAX34451 released a newer version called max34451etna8+.
This simply changes the direct format coefficients
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20260722-max34451_fixes-v2-2-bbddb18ec1d6@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The fan driver now is independent of the fan plreg GPIO information.
Therefore there will no longer be presence or fail information available
from the driver. Part of the changes includes removing a system power check
as the GPIO driver needs it to report power state to host.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230705194544.100370-5-nick.hawkins@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
