I am already listed as a maintainer for the HNS3 and HIBMCGE drivers,
but not for the broader Hisilicon Network Subsystem entry, whose file
pattern covers drivers/net/ethernet/hisilicon/ (e.g. the legacy hns
driver). As a result, patches to those files are not CC'd to me.
Add myself alongside Jian Shen to help maintain these legacy Hisilicon
ethernet drivers and ensure patches in this tree are routed to me.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Acked-by: Jian Shen <shenjian15@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260804130554.871716-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dibs->lock is initialised by dibs_dev_add(), but a dibs device can
already take interrupts before that call: ism_probe() runs
ism_dev_init(), and hence request_irq(), before it calls
dibs_dev_add(). No client can have registered a dmb at that point, so
no dmb interrupt can occur, but a GID event interrupt can, and
ism_handle_irq() takes dibs->lock unconditionally on entry, before it
inspects anything else.
Initialise the lock in dibs_dev_alloc() instead, so that it is valid as
soon as a driver can publish the device to its interrupt handler.
Fixes: cc21191b58 ("dibs: Move data path to dibs layer")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Link: https://patch.msgid.link/20260730124227.167829-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
prestera_fw_hdr_parse() reads the firmware header before checking
that the firmware image contains that header.
Reject images shorter than struct prestera_fw_header before decoding the
magic and version fields.
Fixes: 4c2703dfd7 ("net: marvell: prestera: Add PCI interface support")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20260731141500.1-prestera-v2-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 4f61f133f3 ("net: tap: NULL pointer derefence in
dev_parse_header_protocol when skb->dev is null") fixed a crash in
tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb().
This is required because virtio_net_hdr_to_skb() may invoke
dev_parse_header_protocol(), which dereferences skb->dev. Without the
assignment, a NULL pointer dereference can occur.
However, tap_get_user_xdp() still parses the virtio-net header before
assigning skb->dev. When the vhost TX path passes an XDP buffer containing
a GSO virtio-net header but the protocol is set to zero on purpose,
tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev
is still NULL, resulting in a crash.
Fix this by looking up the tap device and assigning skb->dev before calling
tun_vnet_hdr_to_skb(), matching the ordering already used in
tap_get_user(). Preserve the existing RCU read-side critical section across
dev_queue_xmit().
Fixes: 924a9bc362 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
Cc: stable@vger.kernel.org
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260802224612.264563-1-dongli.zhang@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the
quoted inner IPv6 packet, and then passes the clone to icmpv6_send().
The clone still carries the outer packet's inet6_skb_parm in skb->cb.
If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao
remains non-zero after skb_pull(). icmpv6_send() later calls
mip6_addr_swap(), which uses that stale dsthao offset against the quoted
inner packet. A malformed inner destination-options header can then make
the HAO lookup and address swap run past the end of the quoted packet
and corrupt skb_shared_info.
Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the
reply path does not reuse metadata left by the outer IPv6 stack.
Fixes: e490d1d85c ("[IPV6] IP6TUNNEL: Split out generic routine in ip6ip6_err().")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/fe1a5e765fbca88d69391887f0ed26a19e3e4d39.1785736562.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ncsi_send_cmd_nl() takes the number of bytes to copy from the
attacker-controlled ncsi_pkt_hdr.length field of the in-band packet
header, while the source buffer is the NCSI_ATTR_DATA netlink
attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr).
The two length sources are never cross-checked: only
nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced.
With hdr->length set larger than the attribute payload (up to 65535
against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies
past the end of the netlink attribute buffer with unsafe_memcpy(),
leaking up to ~64KB of kernel heap memory into the transmitted NCSI
command packet. The destination skb is sized by the declared payload,
so the write side does not overflow - this is a pure OOB read /
information leak, reachable with CAP_NET_ADMIN on systems with a
registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where
NET_NCSI=y is standard).
Reject commands whose declared payload extends past the end of the
data attribute.
The issue was found by the autokbug dynamic kernel fuzzer at Tencent
Yunding Lab.
Fixes: 9771b8ccdf ("net/ncsi: Extend NC-SI Netlink interface to allow user space to send NC-SI command")
Reported-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20260803043618.3210301-1-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mac802154_beacon_worker() reads local->beacon_req under RCU and derives
the sub-interface from the request, but then drops the RCU read lock and
continues to use both sdata and the embedded wpan_dev.
mac802154_stop_beacons_locked() cancels only pending beacon work, clears
local->beacon_req and frees the request. A beacon worker that is already
running can therefore continue after interface teardown and dereference
the freed netdev private area.
The scan worker already pins the netdev before leaving RCU. Apply the
same lifetime rule to the beacon worker: take a netdev reference while
the request is still protected by RCU, and release it on all paths that
continue after the reference is acquired.
Fixes: 3accf47627 ("mac802154: Handle basic beaconing")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/e9a3909c7a6281967961773ca841e860b8ecf40e.1785596603.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Incoming skbs passing through netfilter flowtable offload hooks (or XFRM
offload path) might already carry a ref-counted dst_entry assigned during
earlier RX or routing steps.
Calling skb_dst_set_noref() when skb already holds a ref-counted dst
overwrites skb->_skb_refdst, leaking the previous dst_entry reference
count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in
skb_dst_check_unset():
WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170
WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234
WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864
Drop any existing dst_entry reference with skb_dst_drop(skb) before
setting the non-referenced flowtable destination.
Fixes: 2a79fd3908 ("netfilter: nf_flow_table: attach dst to skbs")
Reported-by: syzbot+76d4e3a055aec3b007ec@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a71b141.9511d2ce.1fc5b9.033b.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20260804093328.1831847-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through
far more pending Fast Open requests than it was configured for.
This only shows up with SO_REUSEPORT listener migration, where closing a
listener hands its still-pending TFO children over to a surviving one.
fastopenq.qlen is charged in tcp_fastopen_create_child() when the child
is created and uncharged in reqsk_fastopen_remove() when the handshake
completes. The uncharge follows rsk_listener of the request the child
points at, and inet_reqsk_clone() has repointed the child at a new
request owned by the new listener, so the ++ and the -- land on two
different sockets. The new listener's qlen drifts negative and its
limit no longer binds.
Charge the new listener during migration, like reqsk_queue_migrated()
already does for queue->young and queue->qlen.
Fixes: 54b92e8419 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260803061739.134737-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sequence used in the SRSO mitigation and still poisoning the RSB.
Do that by emulating the saferet sequence and thus avoiding executing
a RET instruction.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmpmGc8ACgkQEsHwGGHe
VUow/Q/+KJxaQyhYwINEUE2M/mzAjraCJBHbTWIsbpUgwHzC2EjVQluV91Kg5O5s
P3cvbxeAcfx9SWIJ9e0vi5JdxAHDd0Idy0FMccg0xWOPJOzGjXpQZzeg+4yvm4a4
URgr7P+IFNgdnfDsZoTbf510AczlNXFQS4YcmgVDOvdhZjlcLK2/7CYdRtgQ+B3E
J1NkaD9RPW9HaCr5XbCgw+lI8XMQNQEdQ3MGwfCgQERl5i5iM6D33Sh/0bq6zfNy
HiMk27LthH7woHRuTrp2DjqeiygQdAPl+87/NND95KWz73fkqFofMfFkMfTVDvkZ
klibXv1oVkEAnGD2/QUVUrn6EbLU/yXB+7LwHC7O7Du7fMV60xyQhEkxWHYV/Szx
kSOtwaTYHc84KdqsBVFLoS7Gr6sMb0cIGcHwC4dQdWT5ZqztwBZJJklsLjJNoPNG
prFCq1ER3282DJ76C8DUseIKXdLzcMcPZK4gdi1g/g0ESaCRxH2e4aRRMaXMQC2W
uZT6EPkyMl+eR5r0gSFJEXLxFnBVguFeJV2uSh3crnXvrJqKEyJDyHgodDxUzQ9P
wFa6KD+yILiDXMwRDLw8C5EhApQ4MqRmys2HEC65pXWYAm14ivEaOXZHDdQ8pd0W
eaWa90nFe0dwQz00g/A0XfxnEmh4AMIGBsSwAIFsMjKIunizRUk=
=PpIN
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_saferet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
- Add a mitigation for the attack vector of interrupting the saferet
sequence used in the SRSO mitigation and still poisoning the RSB.
Do that by emulating the saferet sequence and thus avoiding executing
a RET instruction.
* tag 'x86_bugs_saferet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Make Safe-RET robust against interrupt injection
Partial pull of the nf-26-07-31 tag
Pablo says:
====================
The following patchset contains Netfilter/IPVS fixes net, this
includes fixes for ebtables nflog target, ipset hash type,
IPVS kthread estimator
1) Prevent IPVS kthread estimator from draining the est_temp_list
when netns is being dismantled. From Zhiling Zou.
2) Missing module nflog refcount bump from ebtables nflog target from
.checkentry path. Similar dependency exists already in xt_NFLOG and
nft_log. From Chengfeng Ye.
3) Use RCU to fix ipset bookkeeping of cidr values on weakly-ordered
architectures. From Jozsef Kadlecsik.
4) Use atomic64_t for set->ext_size in ipset to fix parallel inserts
and deletes racing on updating it. From Jozsef Kadlecsik.
5) Add small wrappers for hash and bucket size to prepare the update
of ipset hash set types to rhashtable, from Florian Westphal.
6) Add mtype_del_cidr_all() and use it to prepare the migration of
ipset hash types to rhashtable. From Florian Westphal.
7) Replace existing ipset call_rcu() based destruction with rcu_work
api also to ease the transition to rhashtable. Also from Florian.
8) Avoid reading the IPv4 ihl field multiple times to prevent local
attacker to cause out-of-bounds write in ip_vs_nat_icmp(), from
Julian Anastasov.
9) Restore the checksum validations that could be needed by the IPVS
FORWARD hook. Also from Julian.
====================
Link: https://patch.msgid.link/20260731151806.849724-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YbZ/
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20260805' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
- Continue to improve the validation of SELinux policies during load
- Fix a SELinux regression caused by bpffs changes in v7.2-rc1
- Fix a SELinux preformance regression caused by SELinux changes in
v7.2-rc1
* tag 'selinux-pr-20260805' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: check level category sets once at load time
selinux: require every boolean value to be defined
selinux: reject an unclaimed class value in security_get_classes()
selinux: require a class's permission values to cover its permission count
selinux: do not cancel a policy conversion that never started
selinux: bpf: check SBLABEL_MNT before isec init
selinux: reject a class permission count below its inherited common
selinux: reject a permission value exceeding the class permission count
bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie accept a socket pointer
'sk' with argument type ARG_PTR_TO_BTF_ID_SOCK_COMMON. However, they access
sk->sk_protocol without validating whether 'sk' represents a full socket.
Fix this issue by checking sk->sk_state != TCP_LISTEN before inspecting
sk->sk_protocol in both bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie.
Since mini-sockets are never in the TCP_LISTEN state, the condition
short-circuits and prevents dereferencing fullsock-specific fields.
Fixes: 3990408470 ("bpf: add helper to check for a valid SYN cookie")
Fixes: 70d6624431 ("bpf: add bpf_tcp_gen_syncookie helper")
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://lore.kernel.org/bpf/6218aa3534d0d2d3f448fde70a8dc2769d7a8201.1785823138.git.rakukuip@gmail.com
Previously, rmi_f54_buffer_queue() waited for the worker thread to
finish but ignored whether it succeeded. If the worker failed (e.g.,
due to a timeout or register read failure), the queue thread would
silently return success, delivering stale or uninitialized memory to
userspace.
Add a 'report_error' field to struct f54_data to store the worker's exit
status. Check this field in rmi_f54_buffer_queue() after the worker
finishes, and mark the buffer as VB2_BUF_STATE_ERROR if an error
occurred.
Fixes: 3a762dbd53 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Reported-by: sashiko-bot@kernel.org
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260626051802.4033172-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The majority of the fixes this time is for Qualcomm devicetree files,
addressing various incorrect settings in chip specific dtsi files that
prevent some feature from working correctly.
Another three such issues are addressed on the Broadcom bcm5301x and
bcm2712 SoC platforms.
Two minor issues are addressed in nuvoton and aspeed specific SoC drivers,
and the MAINTAINERS file is updated to add Billy Tsai and Ryan Chen as
aspeed reviewers as well as clarify the NXP/Freescale entries.
-----BEGIN PGP SIGNATURE-----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=1+QO
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The majority of the fixes this time is for Qualcomm devicetree files,
addressing various incorrect settings in chip specific dtsi files that
prevent some feature from working correctly.
Another three such issues are addressed on the Broadcom bcm5301x and
bcm2712 SoC platforms.
Two minor issues are addressed in nuvoton and aspeed specific SoC
drivers, and the MAINTAINERS file is updated to add Billy Tsai and
Ryan Chen as aspeed reviewers as well as clarify the NXP/Freescale
entries"
* tag 'soc-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: add Ryan Chen and Billy Tsai as reviewer for ARM/ASPEED
ARM: dts: BCM5301X: EA9200: fix NVRAM size
ARM: dts: BCM5301X: fix PCIe controller 2 second interrupt
arm64: dts: qcom: eliza: Fix DSI1 phy reference clock rate
MAINTAINERS: ARM/FREESCALE: merge Layerscape entry into i.MX entry
ARM: npcm: Fix OF node refcount leaks in SMP setup
soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read
arm64: dts: broadcom: bcm2712: Remove non-functional EL2 virtual timer
arm64: dts: qcom: sdm850-lenovo-yoga-c630: lower PSCI cluster idle
arm64: dts: qcom: sc8280xp: gaokun3: correct EC interrupt pin
arm64: dts: qcom: sc8280xp: add several missing pdc map entries
arm64: dts: qcom: sm8650: Fix IPA IMEM slice
arm64: dts: qcom: monaco: Add default GIC address cells
arm64: dts: qcom: purwa: Fix GPU IOMMU property
arm64: dts: qcom: glymur: fix QUP serial engine IRQs
arm64: dts: qcom: glymur: fix PCIe SMMU interrupts
When zap_pte_range reclaims a page table, it does:
pte_free_tlb(tlb, pmd_pgtable(pmdval), addr);
and this is unconditionally wrong: if this code executes, addr *always*
points one past the end of the range covered by the table. The addr
parameter is used to flush the TLB (really the paging-structure-cache)
to drop references to the to-be-freed table, and any architecture that
cares about the parameter will flush the wrong address. (But they'll
still free the correct page).
I think it's worth contemplating why the kernel works at all.
If we hit the offending line of code, we will first clear the PMD entry
(line 1954, zap_empty_pte_table), then we will issue pending flushes if
force_flush is set (tlb_flush_mmu_tlbonly(tlb)), then we will skip the
retry on line 1979 (phew!), and then we will do the offending
pte_free_tlb call. *Or* we will clear the PMD entry immediately before
pte_free_tlb (line 1983, zap_pte_table_if_empty).
If we have any pending flushes (i.e. we actually zapped any last-level
entries) at the time we clear the PMD entry, then the flush really ought
to flush all references to the table (Linus certainly seems to think it
will on all architectures [0]).
The condition under which we have no accumulated flushes at the time of
the clear is very complex (the whole zap_pte_range function has absurdly
complex control flow). If we do hit the bad case, then we will end up
clearing the PMD entry after the last time the range is flushed, and any
CPU is free to cache a reference to the (empty) page table. If this
happens due to an ordinary read or write, it would segfault, so it would
be rare. But the cache could be speculatively filled as well. Then
we'll flush the wrong address and then free and possibly reuse the
table.
On x86, even flushing the wrong address works on non-KPTI Intel systems
because INVLPG flushes *all* paging-structure-caches, not just the ones
for the target address. But INVPCID does not, and flush_tlb_one_user
will use INVPCID if it's available. And then we're toast. AMD systems
are more susceptible: we set the EFER.TCE bit, which makes even INVLPG
only flush the target address.
I think this might fix an issue in ripgrep reported here:
https://github.com/BurntSushi/ripgrep/issues/3494
[0] https://lore.kernel.org/all/CA+55aFzBggoXtNXQeng5d_mRoDnaMBE5Y+URs+PHR67nUpMtaw@mail.gmail.com/T/#u
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Fixes: 4c640eb418 ("mm: move pte table reclaim code to memory.c")
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: stable@vger.kernel.org
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Qi Zheng <qi.zheng@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The both functions xcrb_msg_to_type6cprb_msgx() and
xcrb_msg_to_type6_ep11cprb_msgx() copy the user space message into a
kernel buffer based on the message length. But on further processing
the message is supposed to be 4 byte length adjusted. Thus up to 3
bytes of uninitialized kernel memory are forwarded to further
processing steps and may unwanted expose kernel memory to the crypto
card firmware.
This patch contains code to pad the gap between user space copied
message and message buffer length sent down to further processing of
the CCA or EP11 message to zeros.
Fixes: e2c6d91eb8 ("s390/zcrypt: Rework domain processing within zcrypt device driver")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 7.1+
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The zcrypt_msgtype6_send_ep11_cprb() function uses fragile struct
overlays to access and modify the domain field in the EP11 CPRB
payload, creating maintainability and security concerns:
1. Struct overlay approach (pld_hdr) assumes fixed payload structure
and doesn't validate the actual ASN.1 encoding.
2. Complex length format detection logic is error-prone and doesn't
properly validate bounds at each parsing step.
3. Direct struct member access bypasses proper ASN.1 validation.
Fix by replacing struct overlays with explicit ASN.1 parsing that
validates each field (payload tag/length, function tag/length/value,
optional domain tag/length/value) with proper bounds checking at every
step. Add asn1_int_encode() helper function to safely write integer
values with correct endianness conversion. This makes the code
consistent with the validation pattern introduced with the rework of
the xcrb_msg_to_type6_ep11cprb_msgx() function.
Fixes: e2c6d91eb8 ("s390/zcrypt: Rework domain processing within zcrypt device driver")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Cc: stable@vger.kernel.org # 7.1+
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The xcrb_msg_to_type6_ep11cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Missing minimum size validation: The ep11_cprb structure and
subsequent payload fields (pld_tag, pld_lenfmt) are copied from
userspace without verifying sufficient buffer length.
2. Arithmetic overflow in length calculations: CEIL4 alignment could
overflow, bypassing size checks and enabling buffer overflows.
3. The payload is asn1 encoded but the function just uses a simple c
struct overlay to access some fields of the payload.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, and validating minimum request size and
minimum reply size before copying from userspace. Do a very simple
asn1 parsing of the payload up to the function value field.
Fixes: e2c6d91eb8 ("s390/zcrypt: Rework domain processing within zcrypt device driver")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Cc: stable@vger.kernel.org # 7.1+
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The xcrb_msg_to_type6cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Integer overflow after CEIL4 alignment: Signed int variables could
overflow during 4-byte boundary alignment, causing undersized
buffer allocations or incorrect bounds checking.
2. Missing minimum size validation: The CPRBX structure is copied from
userspace without verifying sufficient buffer length. Undersized
buffers cause uninitialized memory access when reading structure
fields like cprbx.cprb_len and cprbx.domain.
3. Arithmetic overflow in sum calculations: Adding control block and
data block sizes could overflow, bypassing size checks and enabling
buffer overflows.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, validating minimum control block size before
copying from userspace, and detecting sum calculation overflows.
Fixes: e2c6d91eb8 ("s390/zcrypt: Rework domain processing within zcrypt device driver")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 7.1+
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Both CPRB alloc functions in zcrypt_ccamisc.c and zcrypt_ep11misc.c
did not round up the memory allocation to a multiple of 4 bytes as it
is needed by the zcrypt layer to process the CPRBs.
Now the alloc_and_prep_cprbmem() and alloc_cprbmem() functions
guarantee that the base CPRB struct and a possible parameter block are
aligned to a 4-byte boundary and the backing memory allocation is
rounded up to the next multiple of 4 byte. Also the free_cprbmem() is
updated and scrubs the rounded up amount of memory.
Fixes: 9bdb5f7e83 ("s390/zcrypt: Introduce cprb mempool for cca misc functions")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
reg_defaults must be sorted by ascending register address as
regcache_lookup_reg() locates the entries in it with bsearch(), see commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
These three tables have entries which are out of order, so the binary search
does not find part of them. For those registers regcache_reg_needs_sync()
cannot compare the cached value against the default and reports that a sync
is needed, so they are written to the device on every regcache_sync() even
when they were never touched.
The patches only reorder the existing entries, the text of every entry is
kept verbatim and no default value is changed. Each table was verified by
evaluating the register addresses and replaying lib/bsearch.c on them.
Entries not reachable by the binary search, per table:
cs35l41_reg 2 (of 47)
cs35l45_defaults 36 (of 73)
cs4265_reg_defaults 3 (of 16)
For cs35l45 this is nearly half of the table: the DSP1_RX*_RATE and
DSP1_TX*_RATE registers sit in the middle of it while their addresses are
far above everything else, which cuts the search off from the whole
0x4c40 - 0xf010 range.
Found by an audit of all reg_defaults tables under sound/, the SoundWire
codec drivers are fixed by a separate series.
Link: https://patch.msgid.link/20260805082413.26174-1-peter.ujfalusi@linux.intel.com
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
cs4265_reg_defaults[] lists CS4265_INT_MASK (0x0e),
CS4265_STATUS_MODE_MSB (0x0f) and CS4265_STATUS_MODE_LSB (0x10) after
CS4265_SPDIF_CTL1 (0x11) and CS4265_SPDIF_CTL2 (0x12), so the binary search
does not find those three entries. regcache_reg_needs_sync() then cannot
compare them against their default and reports that a sync is needed, so
they are written to the device on every regcache_sync() even when they were
never touched.
Sort the table by register address.
Fixes: fb6f806967 ("ASoC: Add support for the CS4265 CODEC")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260805082413.26174-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
cs35l45_defaults[] lists the DSP1_RX*_RATE and DSP1_TX*_RATE registers
(0x02b80080 - 0x02b802b8) in the middle of the table, ahead of entries with
much lower addresses, so the binary search does not find 36 of its 73
entries. regcache_reg_needs_sync() then cannot compare those against their
default and reports that a sync is needed, so they are written to the
device on every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: 74b14e2850 ("ASoC: cs35l45: DSP Support")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260805082413.26174-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
cs35l41_reg[] lists CS35L41_BSTCVRT_PEAK_CUR (0x3808) after
CS35L41_BSTCVRT_COEFF (0x3810) and CS35L41_BSTCVRT_SLOPE_LBST (0x3814), so
the binary search does not find those two entries.
regcache_reg_needs_sync() then cannot compare them against their default
and reports that a sync is needed, so they are written to the device on
every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: 5f2f539901 ("ASoC: cs35l41: Correct handling of some registers in the cache")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260805082413.26174-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_us428ctls_vm_fault() turns the faulting page offset into a kernel
address with no bound of any kind:
offset = vmf->pgoff << PAGE_SHIFT;
vaddr = (char *)(...)->us428ctls_sharedmem + offset;
page = virt_to_page(vaddr);
get_page(page);
vmf->page = page;
return 0;
snd_us428ctls_mmap() checks only the length of the mapping, never the
offset, and us428ctls_sharedmem is a single page from
alloc_pages_exact(). For a character device file_mmap_size_max()
returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page
offset above zero resolves to a struct page outside the object, and the
handler installs it into the caller's address space read-write; the vma
is not marked read-only.
The caller picks the page frame with a single mmap() argument and gets
read-write access to a page of kernel memory it does not own; an offset
that lands in an unpopulated vmemmap region oopses instead.
A process that can open the hwdep node of an attached US-X2Y reaches
this after loading the FPGA image through the same node; no capability
check is involved.
On 7.2.0-rc5 (arm64), mmap() with a large offset:
Unable to handle kernel paging request at virtual address fffffdffc45d5ac8
pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
Call trace:
snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
__do_fault
__handle_mm_fault
handle_mm_fault
el0_da
Reject any offset outside the shared region. The pcm hwdep handler in
usx2yhwdeppcm.c computes its address the same way and needs the same
bound.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260805013445.38283-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
data_ep_set_params() sizes each URB transfer buffer before it adds the
Format Type II transfer delimiter:
u->packets = urb_packs;
u->buffer_size = maxsize * u->packets;
if (fmt->fmt_type == UAC_FORMAT_TYPE_II)
u->packets++; /* for transfer delimiter */
u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
buffer_size is computed from the pre-increment packet count and never
recomputed, so for a Type II endpoint the buffer is one packet short of
the packet count the URB is built with.
prepare_inbound_urb() then lays out one iso frame per packet and never
consults buffer_size:
offs = 0;
for (i = 0; i < urb_ctx->packets; i++) {
urb->iso_frame_desc[i].offset = offs;
urb->iso_frame_desc[i].length = ep->curpacksize;
offs += ep->curpacksize;
}
urb->transfer_buffer_length = offs;
urb->number_of_packets = urb_ctx->packets;
The last descriptor therefore points one packet past the end of the
transfer buffer, where the host controller writes device data on every
inbound transfer. prepare_silent_urb() and prepare_playback_urb() bound
their fill loops by ctx->buffer_size, so only capture is affected.
fmt_type comes from the device's audio streaming descriptors, so any
device advertising a Type II capture format hits this once userspace sets
hw_params on the stream.
KASAN on 7.2.0-rc5 (arm64) with a dummy_hcd/raw-gadget device, one report
per inbound transfer:
BUG: KASAN: slab-out-of-bounds in dummy_timer
Write of size 64 at addr ffff0000186171c0 by task cons02/166
__asan_memcpy
dummy_timer
hrtimer_run_softirq
Allocated by task 166:
usb_alloc_coherent
snd_usb_endpoint_set_params
The buggy address is located 0 bytes to the right of
allocated 64-byte region [ffff000018617180, ffff0000186171c0)
Compute buffer_size after the delimiter packet has been accounted for,
and bound the fill loop by buffer_size, as prepare_silent_urb() already
does on the outbound side. This grows every Type II URB allocation by
one maxsize packet.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 8fdff6a319 ("ALSA: snd-usb: implement new endpoint streaming model")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260805013441.38245-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Changing the input (diagnostic report type) mid-stream changes the
report size. Since V4L2 buffers are allocated based on the size at
stream start, changing the input while streaming could lead to a
heap buffer overflow if the new size is larger than the allocated
buffers.
Prevent this by blocking VIDIOC_S_INPUT with -EBUSY if the V4L2 queue
is busy (streaming).
Fixes: 3a762dbd53 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Link: https://patch.msgid.link/20260626051802.4033172-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
but rmi_f54_get_report_size() computes the size from
drv_data->num_*_electrodes when those are set, i.e. from the F55
function's electrode counts. Both counts come straight from device
queries (F54 and F55 each report up to 255 electrodes) and nothing
constrains the F55 counts to the F54 ones.
A malicious or malfunctioning RMI4 device that reports larger F55
electrode counts than its F54 counts makes report_size exceed the
allocation, so the read loop writes past report_data (and the V4L2
dequeue memcpy() then reads past it). On conforming hardware the F55
configured electrodes are a subset of the F54 physical electrodes, so
report_size never exceeds the buffer and well-behaved devices are
unaffected.
Record the allocation size and reject a report that does not fit,
mirroring the existing zero-size check.
Fixes: c762cc68b6 ("Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260626051802.4033172-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In rmi_f54_work(), if an error occurs during report request or command
verification, the code jumped directly to the 'error' label, bypassing
the 'abort' label where f54->report_size was normally zeroed out.
This left f54->report_size containing its previous successful payload
size. If a user then altered the V4L2 format to a smaller size, and a
subsequent run failed, rmi_f54_buffer_queue() would copy the stale,
larger payload size into the shrunken V4L2 buffer, causing a heap
buffer overflow.
Fix this by merging the 'abort' and 'error' labels into a single 'out'
exit path, and ensuring that f54->report_size is always set to 0 on
failure by checking for error and zeroing the local report_size first.
Fixes: 3a762dbd53 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Cc: stable@vger.kernel.org
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260626051802.4033172-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
During F55 sensor detection, the transmitter (TX) electrode count was
incorrectly assigned the value of the receiver (RX) electrode count
due to copy-paste typos.
This incorrect value was then propagated to the driver data and used
by F54 to determine the diagnostics report size. On devices with more
RX than TX electrodes, this inflated the perceived TX count, leading
to incorrect report size calculations and potential out-of-bounds
buffer accesses.
Fix the typos by correctly assigning the TX electrode counts.
Fixes: 6adba43fd2 ("Input: synaptics-rmi4 - add support for F55 sensor tuning")
Fixes: c762cc68b6 ("Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54")
Reported-by: sashiko-bot@kernel.org
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260626051802.4033172-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In sctp_process_asconf(), when sctp_make_asconf_ack() fails to allocate
the ASCONF_ACK chunk due to memory pressure, the code jumps to the
done label where asoc->peer.addip_serial is unconditionally incremented.
This leaves the peer's ASCONF (serial N) unacknowledged while the local
endpoint now expects serial N+1. When the peer retransmits serial N, it
falls into the serial < addip_serial + 1 branch ,
which attempts to look up a cached ACK for serial N. No cached ACK
exists since the allocation failed, so the retransmission is silently
discarded. The peer eventually times out and ABORTs the association.
Move the addip_serial increment inside the if (asconf_ack) block so that
the serial number is only advanced when the ASCONF_ACK is successfully
created and cached. This way, on allocation failure, the serial number
is unchanged and the peer's retransmitted ASCONF will be correctly
re-processed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260804025514.241767-1-l1138897701@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Callers of migrate_pages() should adjust NR_MIGRATED_{ANON,FILE} for
isolations and putback of the folios. That for migration succeeded folios
is done by migrate_pages(), in migrate_folio_done(). That for MR_DEMOTION
reason is an exception though.
DAMOS_MIGRATE_{HOT,COLD} call migrate_pages() but mistakenly not doing the
stat adjustment. As a result, use of DAMOS_MIGRATE_{HOT,COLD} could
corrupt the stat. It could confuse too_many_isolated(), make compaction
and reclaim to behave in unexpected ways. The stat corruption can be
reproduced and confirmed using DAMON user-space tool [1] on NUMA systems,
like below.
$ numactl --hardware
available: 2 nodes (0-1)
[...]
$ sudo ./damo start --damos_action migrate_hot 1
$ sudo cat /proc/sys/vm/stat_refresh
$ sudo dmesg
[...]
[ 80.215554] vmstat_refresh: nr_isolated_anon -5578
[ 80.216842] vmstat_refresh: nr_isolated_file -34400
This issue was discovered [2] by Sashiko.
Link: https://lore.kernel.org/20260728140404.94476-1-sj@kernel.org
Link: https://github.com/damonitor/damo [1]
Link: https://lore.kernel.org/20260726164356.87940-1-sj@kernel.org [2]
Fixes: b51820ebea ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: <stable@vger.kernel.org> # 6.11.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_pa_migrate() and damos_va_migrate() isolate folios into a local list
and then call damon_migrate_pages(). When target_nid is invalid
(including the scheme default NUMA_NO_NODE / -1), damon_migrate_pages()
returns early without putting the folios back to the LRU.
Callers then discard the list head while those folios remain isolated with
an extra reference taken by folio_isolate_lru(). The pages stay off the
LRU for as long as the mapping exists (anon active+inactive counts drop
while RSS does not), and the leftover references can pin the pages after
the mapping is gone.
Put the folios back on the invalid-nid path so ignored migration requests
still return them to the LRU.
Link: https://lore.kernel.org/20260726014815.1280757-1-dayou5941@163.com
Fixes: 7e6c313069 ("mm/damon/ops-common: ignore migration request to invalid nodes")
Assisted-by: Cursor:grok-4.5
Reviewed-by: SJ Park <sj@kernel.org>
Signed-off-by: liyouhong <liyouhong@kylinos.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but
__folio_split() leaves the xa_state's xa_lru unset. That lets a live,
memcg-charged xa_node exist without being linked into the mapping's
shadow_nodes list_lru; when reclaim later walks the list_lru it trips
VM_WARN_ON(!css_is_dying()).
Use mapping_set_update() to install both the workingset update callback
and the shadow_nodes list_lru on the xa_state.
Link: https://lore.kernel.org/20260725101419.3938406-1-matt@readmodwrite.com
Fixes: 58729c04cf ("mm/huge_memory: add buddy allocator like (non-uniform) folio_split()")
Signed-off-by: Matt Fleming <mfleming@cloudflare.com>
Reported-by: syzbot+c5b060ce82921a2fd500@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c5b060ce82921a2fd500
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nico Pache <npache@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
page_table_check_set() and page_table_check_clear() account mappings based
on PageAnon(). Shared zero-page PTEs and huge zero PMDs are special
mappings, but page_table_check can still account them as file-backed
pages.
An unprivileged process can populate enough zero mappings to overflow
file_map_count and hit the existing BUG_ON(). The PTE path can do this
with the shared zero page, and the PMD path can do the same with huge zero
mappings.
Skip special zero mappings in the user page-table accounting paths. Keep
the PTE-side pte_special() check, and identify huge zero PMDs from the
mapped folio instead of pmd_special(). That covers architectures where
pmd_special() is a no-op without adding huge_zero_pfn checks to the
generic counter helpers.
Link: https://lore.kernel.org/cover.1784717203.git.zhilinz@nebusec.ai
Link: https://lore.kernel.org/e94478e4fb7912fb7e8ebebed5ce85d00dc9a69d.1784717203.git.zhilinz@nebusec.ai
Fixes: df4e817b71 ("mm: page table check")
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Reported-by: Vega <vega@nebusec.ai>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Assisted-by: Codex:gpt-5.4
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_LRU_SORT calls damon_call() for commit_inputs parameter user input
if the DAMON context is initialized. The context could be initialized,
but not yet successfully started. In the case, damon_call() could
indefinitely hang. Read the comment on damon_call() for more detail. Fix
the problem by memorizing if the DAMON context has ever successfully
started, and skip damon_call() if it has not.
This issue can easily be reproduced by writing Y to the commit_inputs
parameter file on a system that DAMON_LRU_SORT has not turned on before.
Link: https://lore.kernel.org/20260803134646.16640-3-sj@kernel.org
Fixes: de3c60e1c8 ("mm/damon: add synchronous commit for commit_inputs")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: Liew Rui Yan <aethernet65535@gmail.com>
Cc: <stable@vger.kernel.org> # 7.2.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/{reclaim,lru_sort}: fix commit_inputs infinite
hang".
Writing 'Y' to commit_inputs parameters of DAMON_RECLAIM and
DAMON_LRU_SORT before the modules were ever turned on causes infinite
hang. Fix those.
The issue was discovered [1] by Sashiko.
This patch (of 2):
DAMON_RECLAIM calls damon_call() for commit_inputs parameter user input if
the DAMON context is initialized. The context could be initialized, but
not yet successfully started. In the case, damon_call() could
indefinitely hang. Read the comment on damon_call() for more detail. Fix
the problem by memorizing if the DAMON context has ever successfully
started, and skip damon_call() if it has not.
This issue can easily be reproduced by writing Y to commit_inputs on a
system that DAMON_RECLAIM was not turned on before.
Link: https://lore.kernel.org/20260803134646.16640-1-sj@kernel.org
Link: https://lore.kernel.org/20260803134646.16640-2-sj@kernel.org
Link: https://lore.kernel.org/20260802173021.762-1-sj@kernel.org [1]
Fixes: de3c60e1c8 ("mm/damon: add synchronous commit for commit_inputs")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: Liew Rui Yan <aethernet65535@gmail.com>
Cc: <stable@vger.kernel.org> # 7.2.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damos_quota_score() can trigger division by zero if the target value is
zero. DAMON_LRU_SORT lets users set the target value for the hot memory
scheme via active_mem_bp parameter. It avoids setting it as the target
value if the parameter value is zero. However, it also sets the cold
memory scheme with a target value that is calculated as '10000 -
active_mem_bp + 2'. Hence, if a user sets active_mem_bp 10002, the cold
memory scheme's quota goal target value can be zero. As a result,
division by zero can be triggered. Fix by returning an error when the
user tries to start DAMON with >10000 active_mem_bp parameter value.
It makes no sense to set active_mem_bp with 10002. It also requires
module parameters write permission to reproduce the issue. That said, the
consequence is quite bad.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_lru_sort/parameters
# echo 1000 > wmarks_high
# echo 995 > wmarks_mid
# echo 0 > wmarks_low
# echo 10002 > active_mem_bp
# echo Y > enabled
# dmesg -w
[...]
[ 597.421247] Oops: divide error: 0000 [#1] SMP NOPTI
[ 597.428848] RIP: 0010:damos_quota_score+0x6f/0x480
This issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260803134034.15217-3-sj@kernel.org
Link: https://lore.kernel.org/20260801213028.5127-1-sj@kernel.org [1]
Fixes: 40d98d31cd ("mm/damon/lru_sort: support active:inactive memory ratio based auto-tuning")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 7.0.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: avoid division by zero from damos_quota_score()".
DAMON_SAMPLE_MTIER and DAMON_LRU_SORT allow the user to trigger division
by zero in damos_quota_score(). Avoid it by adding parameters validation
checks.
This patch (of 2):
damos_quota_score() can trigger division by zero if the target_value is
zero. DAMON_SAMPLE_MTIER lets users set the target_value via
node0_mem_{used,free}_bp parameters. It doesn't guard zero value case,
though. As a result, users can trigger division by zero. Fix the issue
by returning an error when the user tries to start DAMON with zero
node0_mem_{used,free}_bp parameter values.
DAMON_SAMPLE_MTIER is just a sample module, but the consequence is quite
bad. Also the zero node0_mem_free_bp parameter might look like a
reasonable setup to some users. Hence, the issue might really happen in
the real world.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_sample_mtier/parameters
# echo 4096 > node0_start_addr
# echo 8192 > node0_end_addr
# echo 8192 > node1_start_addr
# echo 81920 > node1_end_addr
# echo 0 > node0_mem_free_bp
# echo Y > enabled
# dmesg -w
[...]
[18792.235916] Oops: divide error: 0000 [#1] SMP NOPTI
[...]
[18792.242787] RIP: 0010:damos_quota_score+0x6f/0x480
[...]
This issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260803134034.15217-1-sj@kernel.org
Link: https://lore.kernel.org/20260803134034.15217-2-sj@kernel.org
Link: https://lore.kernel.org/20260801202657.117135-1-sj@kernel.org [1]
Fixes: c5e67d40a1 ("samples/damon/mtier: add parameters for node0 memory usage")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.17.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Map my old jiaxyga.com and ProtonMail addresses to the current
mainlining.org address.
Link: https://lore.kernel.org/20260801153333.296218-1-danila@mainlining.org
Signed-off-by: Danila Tikhonov <danila@mainlining.org>
Cc: Jakub Kacinski <kuba@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rather than mixing the refcounted and non-refcounted
CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic, separate the two out cleanly so
it is clear what happens when this configuration option is set and what
happens when it is not.
Introduce HUGE_ZERO_UNSET_PFN to abstract the ~0UL assignment, only
introduce the refcount, lock and shrinker if
!CONFIG_PERSISTENT_HUGE_ZERO_FOLIO, abstract initialisation and teardown,
abstract the huge zero folio allocation from refcounting.
Also change a BUG_ON() to WARN_ON_ONCE() while we're at it.
No functional change intended.
Link: https://lore.kernel.org/20260730-fix-refcounted-huge-zero-v2-2-c5d8a41b317f@kernel.org
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Fixes: 3b77e8c8cd ("mm/thp: make is_huge_zero_pmd() safe and quicker")
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand (Arm) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Hengbin Zhang <uqbarz@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kiryl Shutsemau <kas@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/huge_memory: fix huge_zero_pfn race", v2.
There is a subtle race in the reference-counted huge_zero_folio
implementation.
The fast path atomic logic fails to account for the fact that the shrinker
(which drops the final huge_zero_refcount pin) can overwrite huge_zero_pfn
with the ~0UL sentinel value in shrink_huge_zero_folio_scan() after a
racing get_huge_zero_folio() installed a valid value there.
This results in huge_zero_folio being correctly set but huge_zero_pfn
being set incorrectly and thus is_huge_zero_pfn() and consequently
is_huge_zero_pmd() will misidentify the huge zero folio as being an
ordinary THP folio.
This can result in the huge zero folio being split and otherwise treated
incorrectly.
The solution to this is very subtle as there is an atomic fast path, and
thus ordering in weakly ordered architectures has to be treated very
carefully.
The first commit fixes the issue by introducing a spinlock around
huge_zero_[pfn, folio, refcount] write, with careful consideration paid to
load/store ordering in the fast path. It is placed first and kept as
small as possible so that it can be backported on its own.
The second commit is a pure cleanup which reworks the
CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic to better separate the persistent
logic from the dynamically allocated one.
This patch (of 2):
If !CONFIG_PERSISTENT_HUGE_ZERO_FOLIO, the huge_zero_folio is refcounted
by huge_zero_refcount and returned by mm_get_huge_zero_folio().
When the caller is done with the huge zero page, its reference count is
decremented. Only a shrinker can set the reference count to zero.
A race can unfortunately occur between a shrinker decrementing the
reference count to zero and a concurrent page fault.
This is because shrink_huge_zero_folio_scan() might, if very unlucky, be
preempted between setting huge_zero_refcount to zero and writing an
invalid value.
During this time get_huge_zero_folio() could write to huge_zero_pfn before
shrink_huge_zero_folio_scan() resumes.
In this event the huge zero folio will be persistently misidentified
causing the THP code path to be entered inappropriately for the huge zero
folio:
CPU 0 CPU 1
=======================================|=================================
shrink_huge_zero_folio_scan() |
atomic_cmpxchg() sets refcount to 0 |
xchg() sets huge_zero_folio to NULL | get_huge_zero_folio()
| | atomic_inc_not_zero() -> zero
preempted for a long time | Allocate new huge zero folio
| | Write valid huge_zero_folio
v | Write valid huge_zero_pfn
Overwrite huge_zero_pfn with ~0UL <--- Invalid overwrite!
This results in is_huge_zero_pfn() and is_huge_zero_pmd() incorrectly
returning false for a huge zero page which could result in issues like the
huge zero folio being incorrectly split.
Note that the issue is with huge_zero_pfn not huge_zero_folio, as
get_huge_zero_folio() uses cmpxchg() gated on huge_zero_folio being NULL
with a retry loop and shrink_huge_zero_folio_scan() uses xchg() to set
huge_zero_folio.
Fix the issue by introducing a spinlock, huge_zero_lock, to prevent
concurrent write of huge_zero_folio, huge_zero_pfn and huge_zero_refcount.
There needs to be significant care taken here to ensure correctness:
The fast path in get_huge_zero_folio() uses atomic_inc_not_zero(), which
is outside of the critical section, and means huge zero allocation is
gated on zero huge_zero_refcount.
The fast path doesn't use huge_zero_lock, so the critical section is
irrelevant to it.
So invariants are required - huge_zero_refcount MUST:
* Only be set in the huge_zero_lock critical section to ensure
serialisation of huge_zero_pfn, huge_zero_folio and huge_zero_refcount
writes.
* Be set non-zero only AFTER huge_zero_[pfn, folio] are set to valid values
so installation of the huge zero folio on read page fault ensures
concurrent is_huge_zero_*() calls correctly identify the huge zero folio.
* Be set zero only BEFORE huge_zero_[pfn, folio] are set to NULL and ~0UL
respectively, and atomically.
Establish these by:
* Only setting huge_zero_refcount to zero or an absolute value in the
huge_zero_lock critical section in get_huge_zero_folio() and
shrink_huge_zero_folio_scan(), and always updating atomically there
and elsewhere.
* Using atomic_set_release(&huge_zero_refcount) in get_huge_zero_folio()
after huge_zero_[pfn, folio] are set. This is paired with
atomic_inc_not_zero() to ensure atomic_inc_not_zero() only observes a
non-zero value if huge_zero_[pfn, folio] are set.
* Using atomic_cmpxchg() in shrink_huge_zero_folio_scan() (as before) to
ensure that it is set zero only when equal to 1 and set atomically.
* atomic_cmpxchg() being fully ordered ensures this is done prior to
huge_zero_[folio, pfn] being set to NULL and ~0UL respectively.
Eliminate the retry loop in get_huge_zero_folio() as the atomic_cmpxchg()
in shrink_huge_zero_folio_scan() is now performed under the lock, and
replace with an equally locked atomic_inc() to set the reference count
should the caller be raced on huge zero folio installation.
folio_put() naturally implies a full memory barrier so its ordering is
maintained correctly.
The huge zero folio also cannot be released except when the shrinker does
so as it is non-LRU and non-rmappable.
Note that only the huge zero shrinker (via shrink_huge_zero_folio_scan())
can actually set huge_zero_refcount to zero, which is the count of mm's
which have at least one huge zero folio installed plus one shrinker pin.
Additionally convert a BUG_ON() to a VM_WARN_ON_ONCE().
Link: https://lore.kernel.org/20260730-fix-refcounted-huge-zero-v2-0-c5d8a41b317f@kernel.org
Link: https://lore.kernel.org/20260730-fix-refcounted-huge-zero-v2-1-c5d8a41b317f@kernel.org
Fixes: 3b77e8c8cd ("mm/thp: make is_huge_zero_pmd() safe and quicker")
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Reported-by: Hengbin Zhang <uqbarz@gmail.com>
Closes: https://lore.kernel.org/linux-mm/20260727154001.4102341-1-uqbarz@gmail.com/
Suggested-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kiryl Shutsemau <kas@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Switch my entry in MAINTAINERS and .mailmap to my @linux.dev email address
Link: https://lore.kernel.org/20260729-email-change-v1-1-666ae7c2b7fc@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Brendan Jackman <brendan.jackman@linux.dev>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In __filemap_add_folio()'s split-a-conflict loop, xas_set_order() is
applied repeatedly: each application modifies xas.xa_index, rounding it
down according to the split_order attempted at that stage: and if all goes
as intended, it eventually (or immediately) converges on an
xas_try_split() to the required folio_order, with xas.xa_index now the
same as index: then xas_store() puts the new folio into the xarray there.
But if a new node was needed, and GFP_NOWAIT allocation did not get one,
the lock is dropped, xas_nomem() used to allocate, and sequence retried.
If (that part of) the xarray is unchanged when the lock is reacquired, no
problem. But what if the conflict was meanwhile resolved by another
thread (perhaps even doing the same thing, inserting a folio at that same
index)? Isn't there a danger of now putting our folio into the xarray at
an intermediate rounded-down index? With !folio_contains() bug to follow,
when CONFIG_DEBUG_VM=y is checking for that.
Fix this with an xas_set_order() to restore the original xas.xa_index at
the bottom of the loop, so the retry does a full re-evaluation after
reacquiring the lock, and cannot reach xas_store() with the wrong index.
Production was suffering from rare SIGILLs and SIGSEGVs, executable text
found a page away from where it belonged, !folio_contains() bug hit when
debug enabled: symptoms not seen since this patch went in.
Link: https://lore.kernel.org/562fbfa6-dd6d-0b6a-2461-ed2ff1173bc8@google.com
Fixes: 200a89c159 ("mm/filemap: use xas_try_split() in __filemap_add_folio()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Chris J Arges <carges@cloudflare.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
microblaze handles TLB misses in software, and the handler builds the
address of the L1 entry by ORing the index into the page directory base
instead of adding it (hw_exception_handler.S):
bsrli r5, r3, PGDIR_SHIFT - 2
andi r5, r5, PAGE_SIZE - 4
/* Assume pgdir aligned on 4K boundary, no need for
"andi r4,r4,0xfffff003" */
or r4, r4, r5
lwi r4, r4, 0 /* Get L1 entry */
The index is masked to the low 12 bits, so the OR only works if those bits
of the base are zero -- which is exactly the assumption the comment states
and the reason the masking of the base can be skipped.
swapper_pg_dir had no alignment directive of its own. It was aligned
because it followed empty_zero_page in head.S, and that one carried the
.align 12:
.section .data
.global empty_zero_page
.align 12
empty_zero_page:
.space PAGE_SIZE
.global swapper_pg_dir
swapper_pg_dir:
.space PAGE_SIZE
Commit 6215d9f447 ("arch, mm: consolidate empty_zero_page") removed
empty_zero_page from head.S, and with it the .align 12 that -- despite
sitting next to empty_zero_page -- was what page aligned swapper_pg_dir.
Since then swapper_pg_dir lands wherever .data happens to put it, its low
bits are no longer zero, and every kernel TLB miss ORs the index into a
base with a nonzero offset. The resulting L1 lookups read the wrong
words, no valid translation is ever installed, and the kernel spins in
exceptions long before it can print anything. On qemu-system-microblazeel
(petalogix-s3adsp1800) the console stays completely silent at 100% CPU;
there is no oops and no guest error reported by qemu, which makes this
awkward to diagnose.
Give swapper_pg_dir the alignment it requires, rather than relying on a
neighbour to provide it.
microblaze has no noMMU variant left in mainline -- CONFIG_MMU is def_bool
y and mmu_defconfig is the only defconfig -- so this is not a corner case:
every mainline microblaze kernel since v7.1-rc1 fails to boot, including
the v7.1 release.
v7.0: swapper_pg_dir = 0xc05fd000 (aligned)
v7.1-rc1: swapper_pg_dir = 0xc0603140 (offset 320)
v7.1-rc1 + this fix: swapper_pg_dir = 0xc0604000 (aligned)
next-20260726: swapper_pg_dir = 0xc0615140 (offset 320)
next-20260726 + this fix: swapper_pg_dir = 0xc0616000 (aligned)
Verified on qemu-system-microblazeel (petalogix-s3adsp1800) with
mmu_defconfig and microblazeel gcc 12.5.0: v7.1-rc1 and next-20260726 both
print nothing at all without the fix, and both boot to userspace with it.
Link: https://lore.kernel.org/20260727215823.1422701-1-ramin.moussavi@yacoub.de
Fixes: 6215d9f447 ("arch, mm: consolidate empty_zero_page")
Signed-off-by: Ramin Moussavi <ramin.moussavi@yacoub.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This partially reverts commit fa93b45fd3 ("arm64: Enable vmalloc-huge
with ptdump"), retaining vmalloc-huge support but eliminating the now
redundant mitigation against a race between huge vmap page table freeing
and ptdump, as this issue has now been fixed at core.
We also simultaneously remove the arm64 if-deffery when acquiring the mmap
read lock upon vmap huge page table promotion as it is no longer required.
Note that this patch relies on the preceding vmalloc patch, and should not
be backported alone.
Link: https://lore.kernel.org/20260723-series-vmap-race-fix-v6-5-8cc77dcc0018@kernel.org
Fixes: fa93b45fd3 ("arm64: Enable vmalloc-huge with ptdump")
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Carlier <devnexen@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
