hws_bwc_matcher_move() allocates a replacement matcher before setting it
as the resize target. If mlx5hws_matcher_resize_set_target() fails, the
replacement matcher is not attached anywhere and is leaked.
Fix the leak by destroying the replacement matcher before returning from
the resize-target failure path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
mlx5 HWS-capable device to test with, no runtime testing was able to be
performed.
Fixes: 2111bb970c ("net/mlx5: HWS, added backward-compatible API handling")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260629064049.3852759-1-dawei.feng@seu.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
copy_to_user_state_extra() only holds a reference to the outer xfrm_state.
That does not pin x->xso.dev. NETDEV_DOWN and NETDEV_UNREGISTER can race
through xfrm_dev_state_flush(), xfrm_state_delete(), and
xfrm_dev_state_free(), which clears xso->dev and drops the netdev
reference before the GETSA dump reaches xso_to_xuo() and reads
xso->dev->ifindex.
The buggy scenario involves two paths, with each column showing the order
within that path:
XFRM_MSG_GETSA dump path: NETDEV teardown path:
1. xfrm_get_sa() gets xfrm_state 1. xfrm_dev_state_flush() finds x
2. copy_to_user_state_extra() sees 2. xfrm_state_delete() removes x
x->xso.dev from the SAD
3. copy_user_offload() calls 3. xfrm_dev_state_free() clears
xso_to_xuo() xso->dev
4. xso->dev->ifindex dereferences 4. netdev_put() drops the device
a detached net_device reference
Avoid following the live net_device from the dump paths. Cache the
attached ifindex in xfrm_dev_offload when state or policy offload is bound
to a device, and serialize that snapshot instead. This preserves the
user-visible XFRMA_OFFLOAD_DEV value without depending on the embedded
net_device lifetime.
Validation reproduced this kernel report:
Oops: general protection fault
Call Trace:
<TASK>
copy_to_user_state_extra+0xb8d/0x1370 [xfrm_user]
? __pfx_copy_to_user_state_extra+0x10/0x10 [xfrm_user]
? __asan_memset+0x23/0x50
? srso_alias_return_thunk+0x5/0xfbef5
? __alloc_skb+0x342/0x960
? srso_alias_return_thunk+0x5/0xfbef5
? __asan_memset+0x23/0x50
? srso_alias_return_thunk+0x5/0xfbef5
? __nlmsg_put+0x147/0x1b0
dump_one_state+0x1c7/0x3e0 [xfrm_user]
xfrm_state_netlink+0xcb/0x130 [xfrm_user]
? __pfx_xfrm_state_netlink+0x10/0x10 [xfrm_user]
? srso_alias_return_thunk+0x5/0xfbef5
? xfrm_user_state_lookup.constprop.0+0x230/0x310 [xfrm_user]
xfrm_get_sa+0x102/0x250 [xfrm_user]
? __pfx_xfrm_get_sa+0x10/0x10 [xfrm_user]
xfrm_user_rcv_msg+0x504/0xaa0 [xfrm_user]
? __pfx_xfrm_user_rcv_msg+0x10/0x10 [xfrm_user]
? srso_alias_return_thunk+0x5/0xfbef5
? stack_trace_save+0x8e/0xc0
? __pfx_stack_trace_save+0x10/0x10
netlink_rcv_skb+0x11f/0x350
? __pfx_xfrm_user_rcv_msg+0x10/0x10 [xfrm_user]
? __pfx_netlink_rcv_skb+0x10/0x10
? __pfx_mutex_lock+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
xfrm_netlink_rcv+0x65/0x80 [xfrm_user]
netlink_unicast+0x600/0x870
? __pfx_netlink_unicast+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_stack_trace_save+0x10/0x10
netlink_sendmsg+0x75d/0xc10
? __pfx_netlink_sendmsg+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
____sys_sendmsg+0x77a/0x900
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_____sys_sendmsg+0x10/0x10
? __pfx_copy_msghdr_from_user+0x10/0x10
? release_sock+0x1a/0x1d0
? srso_alias_return_thunk+0x5/0xfbef5
? netlink_insert+0x143/0xec0
___sys_sendmsg+0xff/0x180
? __pfx____sys_sendmsg+0x10/0x10
? _raw_spin_lock_irqsave+0x85/0xe0
? do_getsockname+0xf9/0x170
? srso_alias_return_thunk+0x5/0xfbef5
? fdget+0x53/0x3b0
__sys_sendmsg+0x111/0x1a0
? __pfx___sys_sendmsg+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __sys_getsockname+0x8c/0x100
do_syscall_64+0x102/0x5a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 07b87f9eea ("xfrm: Fix unregister netdevice hang on hardware offload.")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(),
i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with
rcu_dereference_protected(), stores NULL and dst_release()s the old dst.
That is only safe if no other thread modifies sk_dst_cache concurrently.
For a connected UDP socket that does not hold: the transmit fast path
(udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly
with an atomic xchg(). A per-socket policy change racing a send can make
both sides observe the same old dst and each dst_release() it, dropping
the socket's single reference twice and freeing the xfrm_dst bundle while
it is still referenced:
BUG: KASAN: slab-use-after-free in dst_release
Write of size 4 at addr ffff88801897b6c0 by task exploit/155
Call Trace:
...
dst_release (... ./include/linux/rcuref.h:109)
xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053)
do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347)
ip_setsockopt (net/ipv4/ip_sockglue.c:1417)
do_sock_setsockopt (net/socket.c:2368)
__sys_setsockopt (net/socket.c:2393)
__x64_sys_setsockopt (net/socket.c:2396)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Reachable by an unprivileged user via a user+network namespace.
Use the atomic sk_dst_reset() so the cache is cleared and released with a
single xchg(): whichever side wins releases the dst once, the other sees
NULL and does nothing. Behaviour is otherwise unchanged.
Fixes: 2b06cdf3e6 ("xfrm: Clear sk_dst_cache when applying per-socket policy.")
Fixes: be8f8284cd ("net: xfrm: allow clearing socket xfrm policies.")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
As documented in comments in struct xen_memory_exchange, the input to the
hypercall is a set of MFNs which are to be removed from the domain, plus a
set of PFNs where the newly allocated MFNs are to appear. Present comment
and parameter naming don't correctly reflect that.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <7e0c8795-cc60-4b78-8601-6a999739467a@suse.com>
tools/include/linux/overflow.h uses SIZE_MAX in its size helper functions.
Include stdint.h so tools users that include overflow.h without another
SIZE_MAX provider can build.
Link: https://lore.kernel.org/20260629022124.131894-3-chenyichong@uniontech.com
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "tools: Fix tools/virtio test build", v2.
This series fixes build failures hit by:
make -C tools/virtio test
Patch 1 adds tools/virtio compatibility definitions needed by current
virtio headers when building the tools/virtio tests. Patch 2 makes
tools/include/linux/overflow.h include stdint.h for SIZE_MAX, which is
used by its size helper functions.
With the series applied, make -C tools/virtio test builds virtio_test,
vringh_test and vhost_net_test successfully.
Tested on x86_64 and arm64 with:
make -C tools/virtio clean
make -C tools/virtio test
This patch (of 2):
vhost_net_test builds virtio_ring.c in userspace.
Recent virtio headers pull in helper headers that are not provided by the
tools/virtio compatibility layer, including asm/percpu_types.h,
linux/completion.h, linux/mod_devicetable.h and linux/virtio_features.h.
Add the missing compat definitions and the DMA attribute used by the
current virtio ring code.
Link: https://lore.kernel.org/20260629022124.131894-1-chenyichong@uniontech.com
Link: https://lore.kernel.org/20260629022124.131894-2-chenyichong@uniontech.com
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Cc: chenyichong <chenyichong@uniontech.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ever since idmapped mounts were introduced, inode ownership checks (for
side-channel protection) in mincore() and madvise(MADV_PAGEOUT) were done
against the nop_mnt_idmap, which completely ignores the file's mount's
idmap. This results in odd edgecases like:
1) mount/bind-mount with an idmap userA:userB:1
2) userB runs an owner_or_capable() check on file that is owned by userA
on-disk/in-memory, but owned by userB after idmap translation
3) owner_or_capable() mysteriously fails as the correct idmap wasn't supplied
In the case of mincore/madvise MADV_PAGEOUT, this is usually benign,
because file_permission(file, MAY_WRITE) will probably succeed, as it uses
the proper idmap internally, but it does not need to be the case on e.g a
0444 file where even the owner itself doesn't have permissions to write to
it.
Since this is clearly not trivial to get right, introduce a
file_owner_or_capable() that can carry the correct semantics, and switch
the various users in mm to it.
The issue was found by manual code inspection & an off-list discussion
with Jan Kara.
Link: https://lore.kernel.org/20260625153853.913949-1-pfalcato@suse.de
Fixes: 9caccd4154 ("fs: introduce MOUNT_ATTR_IDMAP")
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner (Amutable) <brauner@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The comment on top of `struct damon_region` clearly says that
For any use case, @ar should be non-zero positive size.
which is now verified in damon_verify_new_region() if the kernel is built
with DAMON_DEBUG_SANITY.
The WARN_ONCE() can be triggered if the mtier sample module is enabled
before node{0,1}_{start,end}_addr have been properly initialized, which is
obviously not good.
------------[ cut here ]------------
start 0 >= end 0
WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118, CPU#59: bash/341468
Call trace:
damon_new_region+0xf4/0x118 (P)
damon_set_regions+0xfc/0x3c0
damon_sample_mtier_build_ctx+0xe8/0x3a8
damon_sample_mtier_start+0x1c/0x90
damon_sample_mtier_enable_store+0x98/0xb0
param_attr_store+0xb4/0x128
module_attr_store+0x2c/0x50
sysfs_kf_write+0x58/0x90
kernfs_fop_write_iter+0x16c/0x238
vfs_write+0x2c0/0x370
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
invoke_syscall+0xa8/0x118
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x54/0x370
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
---[ end trace 0000000000000000 ]---
Note that the same issue can happen if detect_node_addresses is true, and
node 0 or 1 is memoryless. Fix it together by checking the validity of
parameters right before damon_new_region() and fail early if they're
invalid.
Link: https://lore.kernel.org/20260629144432.133962-1-sj@kernel.org
Fixes: 82a08bde3c ("samples/damon: implement a DAMON module for memory tiering")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: SJ Park <sj@kernel.org>
Reviewed-by: SJ Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.16.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As MM is slowly transitioning towards a more distributed maintainership
model, we agreed with Matthew that I will be a co-maintainer in case he is
not available.
Link: https://lore.kernel.org/20260629135927.2586391-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I have used multiple email addresses for my kernel contributions, and some
of them are no longer active. Add all to .mailmap for clarity.
Link: https://lore.kernel.org/20260628150203.4105796-1-radu@rendec.net
Signed-off-by: Radu Rendec <radu@rendec.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The following compilation error occurs with an old version of glibc due to
a recent commit adding MADV_COLLAPSE testing:
[root@localhost mm]# getconf GNU_LIBC_VERSION
glibc 2.34
[root@localhost mm]# make
CC hmm-tests
hmm-tests.c: In function 'hmm_migrate_anon_huge_fault':
hmm-tests.c:2355:27: error: 'MADV_COLLAPSE' undeclared (first use in this function); did you mean 'MADV_COLD'?
2355 | ret = madvise(map, size, MADV_COLLAPSE);
| ^~~~~~~~~~~~~
| MADV_COLD
hmm-tests.c:2355:27: note: each undeclared identifier is reported only once for each function it appears in
make: *** [../lib.mk:225: /root/code/linux/tools/testing/selftests/mm/hmm-tests] Error 1
Include linux/mman.h (which provides the definition of MADV_COLLAPSE) to
fix the build error.
Link: https://lore.kernel.org/20260628143111.36863-1-zenghui.yu@linux.dev
Fixes: e3d8707358 ("selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries")
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are several places in transact_test() where we use the hardcoded
0x1000 (4k) as page size, which is not always correct for architectures
supporting multiple page sizes.
Switch to use the correct page size. Otherwise ./ksft_pagemap.sh on a
16k-page-size arm64 box fails with
$ ./ksft_pagemap.sh
[...]
# ok 96 mprotect_tests Both pages written after remap and mprotect
# ok 97 mprotect_tests Clear and make the pages written
# Bail out! ioctl failed
# # Planned tests != run tests (117 != 97)
# # Totals: pass:97 fail:0 xfail:0 xpass:0 skip:0 error:0
# [FAIL]
not ok 1 pagemap_ioctl # exit=1
# SUMMARY: PASS=0 SKIP=0 FAIL=1
1..1
Link: https://lore.kernel.org/20260628101118.35861-1-zenghui.yu@linux.dev
Fixes: 46fd75d4a3 ("selftests: mm: add pagemap ioctl tests")
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Cc: Muhammad Usama Anjum <usama.anjum@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Zenghui Yu <zenghui.yu@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reading /proc/kpageflags for any anonymous page returns KPF_KSM set, even
when KSM is not in use. As a result, tools misclassify all anonymous
pages as KSM merged.
In stable_page_flags(), if the page is anonymous, then use (mapping &
FOLIO_MAPPING_KSM) check to identify if the anonymous page is KSM page.
However, FOLIO_MAPPING_KSM is FOLIO_MAPPING_ANON | FOLIO_MAPPING_ANON_KSM,
(mapping & FOLIO_MAPPING_KSM) check returns true for all anonymous pages.
To fix it, use FOLIO_MAPPING_ANON_KSM instead.
Link: https://lore.kernel.org/20260629033122.774318-1-tujinjiang@huawei.com
Link: https://lore.kernel.org/20260626013252.2846774-1-tujinjiang@huawei.com
Fixes: dee3d0bef2 ("proc: rewrite stable_page_flags()")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Xu Xin <xu.xin16@zte.com.cn>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Luiz Capitulino <luizcap@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Svetly Todorov <svetly.todorov@memverge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The page_ext iteration API does not validate if the PFN still belongs to a
valid section while advancing the iterator. When dynamically adding
memory in the hotplug path, it can lead to a NULL pointer dereference
during page_ext_lookup at the boundary of the last valid section when
iterator count equals __pgcount.
The for_each_page_ext() macro calls page_ext_iter_next() as its loop
increment. for_each_page_ext() does a "__page_ext =
page_ext_iter_next(&__iter)" at the end. This causes page_ext_iter_next()
to increment iter->index past __pgcount and call page_ext_lookup(start_pfn
+ __pgcount). During memory hotplug (online), the PFN at start_pfn +
__pgcount may belong to a section that has not yet been initialized,
causing page_ext_lookup() to trigger a NULL pointer dereference.
[ 14.555124][ T846] Call trace:
[ 14.555125][ T846] lookup_page_ext+0x6c/0x108 (P)
[ 14.555127][ T846] page_ext_lookup+0x30/0x3c
[ 14.555129][ T846] __reset_page_owner+0x11c/0x260
[ 14.571201][ T846] __free_pages_ok+0x5e8/0x8e0
[ 14.571204][ T846] __free_pages_core+0x78/0xf0
[ 14.571206][ T846] generic_online_page+0x14/0x24
[ 14.597782][ T846] online_pages+0x178/0x30c
[ 14.597784][ T846] memory_block_change_state+0x284/0x32c
[ 14.597787][ T846] memory_subsys_online+0x4c/0x64
[ 14.597789][ T846] device_online+0x88/0xb0
[ 14.597791][ T846] online_memory_block+0x30/0x40
[ 14.597793][ T846] walk_memory_blocks+0xac/0xe8
[ 14.597794][ T846] add_memory_resource+0x280/0x298
[ 14.656161][ T846] add_memory+0x60/0x98
Move the iteration boundary enforcement inside the iterator functions, so
callers cannot inadvertently access beyond the requested range.
Link: https://lore.kernel.org/20260623-page_ext-v3-1-a89799a5367c@oss.qualcomm.com
Fixes: 9039b9096e ("mm: page_ext: add an iteration API for page extensions")
Signed-off-by: Ketan Kishore <ketan.kishore@oss.qualcomm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Luiz Capitulino <luizcap@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix three issues in damon_hot_score() that comes from wrong handling of
extreme (zero or too high) monitoring intervals user setup.
When the user sets sampling interval zero, damon_max_nr_accesses(), which
is called from damon_hot_score(), causes a divide-by-zero. Needless to
say, it is a problem.
When the user sets the aggregation interval zero, the function returns
zero. It is wrong, since the real maximum nr_acceses in the setup should
be one. Worse yet, it can cause another divide-by-zero from its caller,
damon_hot_score(), since it uses damon_max_nr_accesses() return value as a
denominator.
When the user sets the aggregation interval very high, damon_hot_score()
could return a value out of [0, DAMOS_MAX_SCORE] range. Since the return
value is used as an index to the regions_score_histogram array, which is
DAMOS_MAX_SCORE+1 size, it causes out of bounds array access.
The issues can be relatively easily reproduced like below. The sysfs
write permission is required, though.
# ./damo start --damos_action lru_prio --damos_quota_space 100M \
--damos_quota_interval 1s
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/0/monitoring_attrs/intervals/sample_us
# echo 0 > contexts/0/monitoring_attrs/intervals/aggr_us
# echo commit > state
# dmesg
[...]
[ 131.329762] Oops: divide error: 0000 [#1] SMP NOPTI
[...]
[ 131.336089] RIP: 0010:damon_hot_score+0x27/0xd0
[...]
Fix the divide-by-zero intervals problems by explicitly handling the zero
intervals in damon_max_nr_accesses(). Fix the out-of-bound array access
by applying [0, DAMOS_MAX_SCORE] bounds before returning from
damon_hot_score().
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260623135834.67189-1-sj@kernel.org
Link: https://lore.kernel.org/20260619202459.145010-1-sj@kernel.org [1]
Fixes: 198f0f4c58 ("mm/damon/vaddr,paddr: support pageout prioritization")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 5.16.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lance has been doing excellent work reviewing rmap series and has proven
himself to be a great member of the community in general, so add him as an
rmap reviewer.
Link: https://lore.kernel.org/20260622155913.280355-1-ljs@kernel.org
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Acked-by: Dev Jain <dev.jain@arm.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: Lance Yang <lance.yang@linux.dev>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
free_pages_prepare() can fail but compaction_free() does not handle the
failure case. Failed pages should not be added back to cc->freepages for
future use, since they can be either PageHWPoison or free_page_is_bad()
and might cause data corruption.
Link: https://lore.kernel.org/20260622-handle_free_pages_prepare_in_compaction_free-v1-1-fcf3b14abcf7@nvidia.com
Fixes: 733aea0b3a ("mm/compaction: add support for >0 order folio memory compaction.")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_sysfs_scheme_add_dirs() setup the tried_regions directory after the
stats directory setup is completed. When the tried_regions directory
setup is failed, the setup function ensures the reference for the tried
regions directory is released. Hence the error path should put references
on setup succeeded directory objects, starting from the stats directory.
However, the error path is putting the tried_regions directory instead of
the stats directory.
As a direct result, the stats directory object is leaked. Worse yet, if
the tried_regions directory setup failed from the initial allocation, the
scheme->tried_regions field remains uninitialized. The following
kobject_put(&scheme->tried_regions->kobj) call in the error path will
dereference the uninitialized memory. The setup failures should not be
common. But once it happens, the consequence is quite bad.
Fix this issue by correctly putting the stats directory instead of the
tried_regions directory.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260618005650.83868-3-sj@kernel.org
Link: https://lore.kernel.org/20260617005223.96813-1-sj@kernel.org [1]
Fixes: 5181b75f43 ("mm/damon/sysfs-schemes: implement schemes/tried_regions directory")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.2.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/sysfs-schemes: fix wrong directories put orders in
error paths".
Error paths of damon_sysfs_access_pattern_add_dirs() and
damon_sysfs_scheme_add_dirs() functions put references to directories in
wrong orders. As a result, uninitialized memory dereference and/or
memory leak can happen. Fix those.
This patch (of 2):
In access_pattern_add_dirs(), error handling path puts references starting
from setup failed directories. If the failure happpened from the initial
allication in the setup functions, uninitialized memory dereference
happen. The allocation failures will not commonly happen, but the
consequence is quite bad. Fix the wrong reference put orders.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260618005650.83868-2-sj@kernel.org
Link: https://lore.kernel.org/20260617060005.86852-1-sj@kernel.org [1]
Fixes: 7e84b1f821 ("mm/damon/sysfs: support DAMON-based Operation Schemes")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
shrinker_debugfs_add() creates both "count" and "scan" debugfs files
unconditionally.
That assumes every shrinker implements both count_objects() and
scan_objects(), which is not guaranteed. For example, the xen-backend
shrinker sets count_objects() but leaves scan_objects() NULL, so writing
to its scan file calls through a NULL function pointer and panics the
kernel:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
Call Trace:
<TASK>
shrinker_debugfs_scan_write+0x12e/0x270
full_proxy_write+0x5f/0x90
vfs_write+0xde/0x420
? filp_flush+0x75/0x90
? filp_close+0x1d/0x30
? do_dup2+0xb8/0x120
ksys_write+0x68/0xf0
? filp_flush+0x75/0x90
do_syscall_64+0xb3/0x5b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The count path has the same issue in principle if a shrinker omits
count_objects().
To fix it, only create "count" and "scan" debugfs files when the
corresponding callbacks are present.
Link: https://lore.kernel.org/20260617090052.27325-1-qi.zheng@linux.dev
Fixes: bbf535fd6f ("mm: shrinkers: add scan interface for shrinker debugfs")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
expand_shrinker_info() iterates all visible memcgs under shrinker_mutex,
including memcgs that have not finished ->css_online() yet.
Once pn->shrinker_info has been published, teardown must stay serialized
with expand_shrinker_info() until that memcg is either fully online or no
longer visible to iteration. Today alloc_shrinker_info() breaks that rule
by dropping shrinker_mutex before freeing a partially initialized
shrinker_info array, which may cause the following race:
CPU0 CPU1
==== ====
css_create
--> list_add_tail_rcu(&css->sibling, &parent_css->children);
online_css
--> mem_cgroup_css_online
--> alloc_shrinker_info
--> alloc node0 info
rcu_assign_pointer(C->node0->shrinker_info, old0)
alloc node1 info -> FAIL -> goto err
mutex_unlock(shrinker_mutex)
shrinker_alloc()
--> shrinker_memcg_alloc
--> mutex_lock(shrinker_mutex)
expand_shrinker_info
--> mem_cgroup_iter see the memcg
expand_one_shrinker_info
--> old0 = C->node0->shrinker_info
memcpy(new->unit, old0->unit, ...);
free_shrinker_info
--> kvfree(old0);
/* double free !! */
kvfree_rcu(old0, rcu);
The same problem exists later in mem_cgroup_css_online(). If
alloc_shrinker_info() succeeds but a subsequent objcg allocation fails,
the free_objcg -> free_shrinker_info() unwind path tears down the already
published pn->shrinker_info arrays without shrinker_mutex. The
expand_one_shrinker_info() can race with that teardown in the same way,
leading to use-after-free or double-free of the old shrinker_info.
Fix this by serializing shrinker_info teardown with shrinker_mutex, and by
keeping alloc_shrinker_info() error cleanup inside the locked section.
Link: https://lore.kernel.org/20260617085658.27096-1-qi.zheng@linux.dev
Fixes: 307bececcd ("mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ksft_process_madv.sh currently runs run_vmtests.sh with the mmap category.
Update it to run the process_madv category, since ksft_mmap.sh already
runs the mmap category tests.
This avoids running mmap tests twice and ensures that process_madv tests
are run through the kselftest harness.
Link: https://lore.kernel.org/20260608103224.344101-1-sarthak.sharma@arm.com
Fixes: 6ce964c02f ("selftests/mm: have the harness run each test category separately")
Signed-off-by: Sarthak Sharma <sarthak.sharma@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The server controls create-context DataOffset, so the POSIX context data
pointer may be misaligned on strict-alignment architectures. Use
get_unaligned_le32() when reading nlink, reparse_tag, and mode.
Fixes: 69dda3059e ("cifs: add SMB2_open() arg to return POSIX data")
Cc: stable@vger.kernel.org
Signed-off-by: Zihan Xi <xizh2024@lzu.edu.cn>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
posix_info_sid_size() reads sid[1] to obtain the subauthority count,
but its existing boundary check still accepts buffers with only one
remaining byte. Require two bytes before reading sid[1] so all client
paths that reuse the helper reject truncated POSIX SIDs safely.
Fixes: 349e13ad30 ("cifs: add smb2 POSIX info level")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zihan Xi <xizh2024@lzu.edu.cn>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
queue/wbt_lat_usec controls both the stored WBT latency target and the
effective WBT enable state.
The old no-op check skipped updates whenever the converted latency
matched the stored min_lat_nsec. That check ignored whether the current
WBT state already matched the state requested by the write. For a queue
disabled by default, attempting to enable WBT by writing the default
value through sysfs could return success while the enable state was left
unchanged.
Treat a write as a no-op only when both the stored latency and the
effective WBT enabled state already match the converted value.
Signed-off-by: Guzebing <guzebing1612@gmail.com>
Link: https://patch.msgid.link/20260621014030.1625306-1-guzebing1612@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- bootconfig: Fix NULL-pointer arithmetic
Fix undefined pointer arithmetic in xbc_snprint_cmdline() when probing
the buffer length with NULL and size 0. Track the written length as a
size_t instead to prevent build-time UBSan/FORTIFY_SOURCE failures.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmpEY1sbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bxAgH/A+wNARuaA8k3qHdRrzm
eoKNfwPNc2C+QwPMsYVgk0aa1HaZWwuJ7FJQn0P0z3uXO6uvDg5S3q2LTyyLyoTy
3DFcyrAQ1eIk5tj88LTmLHq5a6Jntsl+OZMXy3gU8fVJV8sQFYt1fovHctn0oaY3
Yw5iwGkVzwFMh4BwZn9RfH73zECeUticJeO4qQadRApMsrWgNDz7f+P8YzcUxbBx
BLBE4hnfKA5awRoYaOqGQ5jHsPoyj5GwwDEt+KU412M/E85rQAfGDyw5RXwqnb91
rs7w6EJ8nfEGWDpqJTpZQxZbpvNc88cnh08lnxyFKGWiOBvV7G/qRNXG4AmI2e//
oh4=
=t5+P
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fix from Masami Hiramatsu:
- bootconfig: Fix NULL-pointer arithmetic
Fix undefined pointer arithmetic in xbc_snprint_cmdline() when
probing the buffer length with NULL and size 0. Track the written
length as a size_t instead to prevent build-time UBSan/FORTIFY_SOURCE
failures.
* tag 'bootconfig-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: fix NULL-pointer arithmetic in xbc_snprint_cmdline()
selinux_sctp_bind_connect() dereferences sk->sk_socket to pass a
struct socket * to selinux_socket_bind() and
selinux_socket_connect_helper(). However, when the hook is invoked
from the ASCONF softirq path (sctp_process_asconf), there is no file
reference guaranteeing that sk->sk_socket is non-NULL. The setsockopt
callers (bindx, connectx, set_primary, sendmsg connect) hold a file
reference and are not affected.
Both selinux_socket_bind() and selinux_socket_connect_helper()
immediately resolve sock->sk, never using the struct socket * for
anything else. Refactor the inner logic into helpers that take a
struct sock * directly so that selinux_sctp_bind_connect() never needs
to touch sk->sk_socket at all.
Cc: stable@vger.kernel.org
Fixes: d452930fd3 ("selinux: Add SCTP support")
Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When a debug BO command completes, job->drv_cmd may already have been
freed. Accessing it from aie2_sched_drvcmd_resp_handler() can result in
a use-after-free and memory corruption.
Fix this by introducing reference counting for drv_cmd objects and
transferring ownership to the job while it is in flight. This ensures
that the command remains valid until the completion handler finishes
processing it.
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260701155556.663541-1-lizhi.hou@amd.com
devm_gpiod_get_optional() returns NULL when the optional GPIO is absent,
but returns an ERR_PTR when the GPIO provider lookup fails, including
probe deferral.
Probe currently logs the ERR_PTR case as if the reset GPIO were simply
absent and keeps the error pointer in reset_gpio. Later ads124s_reset()
treats any non-NULL reset_gpio as a valid descriptor and passes it to
gpiod_set_value_cansleep().
Return the lookup error instead of retaining the ERR_PTR.
Fixes: e717f8c6df ("iio: adc: Add the TI ads124s08 ADC code")
Cc: stable@vger.kernel.org
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
drivers/iio/temperature/Kconfig has a dedicated MLX90635 option, but
the Makefile currently builds mlx90635.o under CONFIG_MLX90632.
This means enabling CONFIG_MLX90635 alone does not carry its provider
object into the build, while enabling CONFIG_MLX90632 unexpectedly also
builds mlx90635.o.
Gate mlx90635.o on the matching generated Kconfig symbol.
Fixes: a1d1ba5e1c ("iio: temperature: mlx90635 MLX90635 IR Temperature sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Unlike other sc8280xp platforms, on this platform, in dsdt, gpio 0x2c0
is not mapped to gpio107, it is gpio103, so fix it. I found this until
I did a trigger track, irq is regularly triggerd every several
millisecs. In the past, since here gpio107 was low forever, ec irq
would keep to be triggered and polling the event every several
millisecs.
About how to get the map, please check openbsd driver for it
https://github.com/openbsd/src/blob/master/sys/dev/acpi/qcgpio.c
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260419173251.1180026-2-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
pdc 215, 256, 257 are missing, but we can find tlmm pin 103, 84, 90
are mapped to them respectively, so add the map entries from pdc to
gic. These entries are reversed from .data section of qcgpio.sys
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260419173251.1180026-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
monaco.dtsi:2326.4-2329.30: Warning (interrupt_map): /soc@0/pci@1c00000:interrupt-map:
Missing property '#address-cells' in node /soc@0/interrupt-controller@17a00000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component 'parent unit address', which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0).
Fixes: 46a7c01e7e ("arm64: dts: qcom: qcs8300: enable pcie0")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260407201518.24949-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The architecture updates the cpu_mask in a domain's header to track which
online CPUs are associated with the domain. When this mask becomes empty
the architecture initiates offline of the domain that includes calling
on resctrl fs to offline the domain. If it is a monitoring domain in
which LLC occupancy is tracked resctrl fs forces the limbo handler to
clear all busy RMID state associated with the domain.
The limbo handler always reads the current event value associated with a
busy RMID irrespective of it being checked as part of regular "is it still
busy" check or whether it will be forced released anyway. When reading an
RMID on a system with SNC enabled the "logical RMID" is converted to the
"physical RMID" and this conversion requires the NUMA node ID of the
resctrl monitoring domain that is in turn determined by querying the NUMA
node ID of any CPU belonging to the monitoring domain.
When the monitoring domain is going offline its cpu_mask is empty causing
the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as
argument resulting in an out-of-bounds access.
Refactor the limbo handler to skip reading the RMID when the RMID will
just be forced to no longer be dirty in the domain anyway. Add a safety
check to the architecture's RMID reader to protect against this scenario.
Fixes: e13db55b5a ("x86/resctrl: Introduce snc_nodes_per_l3_cache")
Closes: https://sashiko.dev/#/patchset/cover.1780456704.git.reinette.chatre%40intel.com?part=9
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/16137433df42f85013b2f7a53626795cbd6637b9.1781029125.git.reinette.chatre@intel.com
We currently have a mixture of styles for our RTP tables with respect of
how we define the number of entries:
* xe_rtp_process_to_sr() expects to receive the number of entries as
arguments;
* xe_rtp_process() expects the array to have a sentinel at the end of
the array;
* in xe_rtp_test.c, even though xe_rtp_process_to_sr() does not
require a sentinel value, we need to rely on that technique to be
able to count xe_rtp_entry_sr entries because simply using
ARRAY_SIZE() is not possible.
The style used by xe_rtp_process_to_sr() makes it hard to share the
tables with other compilation units (e.g. kunit tests), since the number
of entries is calculated with ARRAY_SIZE(), which is done at compile
time.
Since we use the size of the tables to create some bitmasks, using a
sentinel style doesn't seem great either.
A way to reconcile things into a single style is to have a struct type
that would hold the entries array and the number of entries. Since we
have xe_rtp_entry and xe_rtp_entry_sr, we would have one type for each.
The advantage of the proposed approach is that now we have a nice way to
share the tables directly to kunit tests with information about their
size.
v6:
- Removed sentinels that are not needed
v5:
- Removed added code from conflict resolution issues
v4:
- Removed conflicts with main branch
v3:
- No changes
v2:
- Add compatibility with new xe_rtp_table_sr format for
"bad-mcr-reg-forced-to-regular" and
"bad-regular-reg-forced-to-mcr"
Fixes: 828a8eaf37 ("drm/xe/oa: Add MMIO trigger support")
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Violet Monti <violet.monti@intel.com>
Link: https://patch.msgid.link/20260601200947.2032784-7-violet.monti@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 5ff004fdc7)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Sen Wang <sen@ti.com> says:
Few miscellaneous bug fixes after the initial merge of TAS675x driver, of
which includes:
- Adding READ_ONCE for all concurrent read params
- Corrected kcontrol bits for temperature range
- Corrected conversion notes in the driver documentation
Link: https://patch.msgid.link/20260630183126.2588322-1-sen@ti.com
Two corrections against the TRM (SLOU589A):
- Corrected channel temperature range
- Corrected conversion formula for global temperature
Fixes: ba46edca35 ("Documentation: sound: Add TAS675x codec mixer controls documentation")
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260630183126.2588322-4-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial merged patch mixed up the bits for temp reg with LDG report,
now fixing to the right bits according to TRM (SLOU589A).
Fixes: 133c81f844 ("ASoC: codecs: Add TAS67524 quad-channel audio amplifier driver")
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260630183126.2588322-3-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
active_playback_dais and active_capture_dais are written atomically via
set_bit()/clear_bit() and can be read concurrently from the
fault_check_work delayed work handler.
fault_check_work already uses READ_ONCE; extend the same guard to all other
reads in tas675x_hw_params() and tas675x_mute_stream().
Fixes: 133c81f844 ("ASoC: codecs: Add TAS67524 quad-channel audio amplifier driver")
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260630183126.2588322-2-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a regression test for the out-of-bounds bit operations on
struct mt_device.mt_io_flags.
A HID multitouch device can advertise a ContactCountMaximum far larger
than the number of contacts a single report describes, up to 255. The
driver used to keep the per-slot active state in the bits of a single
unsigned long and index set_bit()/clear_bit() by the slot number, so such
a device drove those operations out of bounds. The sticky-fingers release
timer made it fatal: mt_release_contacts() cleared one bit per slot and
overwrote the adjacent members of struct mt_device.
The new device advertises a ContactCountMaximum of 250 while exposing only
a few finger collections (a large contact count cannot be expressed with
one finger collection per contact within the HID descriptor size limit).
The test sends a single contact and lets the 100ms sticky-fingers timer
release it. A kernel without the fix panics in mt_release_contacts(); a
fixed kernel reports the release cleanly.
Signed-off-by: Trung Nguyen <trungnh@cystack.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit.
Fixes: 46f781e0d1 ("HID: multitouch: fix sticky fingers")
Cc: stable@vger.kernel.org
Signed-off-by: Trung Nguyen <trungnh@cystack.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
jpeg_v4_0_3_is_idle() initializes ret to false and then accumulates ring
idle status using &=. Since false & condition always remains false, the
function can never report the JPEG block as idle.
Initialize ret to true so the function returns true only when all JPEG
rings report RB_JOB_DONE.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e9df8e9d04)
Cc: stable@vger.kernel.org
