update_counters() and compat_update_counters() forward a user-supplied
32-byte table name to find_table_lock() without NUL-terminating it. On a
lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s",
"ebtable_", name), and vsnprintf() reads past the name field and the
stack object until it hits a zero byte.
BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730)
Read of size 1 at addr ffff8880119dfb20 by task exploit/147
Call Trace:
...
string (lib/vsprintf.c:648 lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
__request_module (kernel/module/kmod.c:150)
do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380)
update_counters (net/bridge/netfilter/ebtables.c:1440)
do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573)
nf_setsockopt (net/netfilter/nf_sockopt.c:101)
ip_setsockopt (net/ipv4/ip_sockglue.c:1424)
raw_setsockopt (net/ipv4/raw.c:847)
__sys_setsockopt (net/socket.c:2393)
...
compat_do_replace() shares the same unterminated name via
compat_copy_ebt_replace_from_user(); terminate it there too so all
find_table_lock() callers behave alike. The other callers already
terminate the name after the copy.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 81e675c227 ("netfilter: ebtables: add CONFIG_COMPAT support")
Cc: stable@vger.kernel.org
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Florian Westphal <fw@strlen.de>
nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6
fragment header and then unconditionally advances skb->mac_header:
skb->mac_header += sizeof(struct frag_hdr);
On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header
yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding
sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7),
after which skb_mac_header_was_set() wrongly reports a MAC header is
present and skb_mac_header() points into the headroom.
The reassembler has done this unconditional add since it was introduced;
it was harmless while mac_header was a bare pointer, but wrong once
mac_header became a u16 offset whose unset state is the ~0U sentinel
tested by skb_mac_header_was_set(). The sibling net/ipv6/reassembly.c
does the same relocation and does guard the adjustment; mirror the
guard here.
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Cc: stable@vger.kernel.org
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Florian Westphal <fw@strlen.de>
smb2_check_message() has a long-standing quirk that accepts a response
whose calculated length is one byte larger than the bytes actually
received ("server can return one byte more due to implied bcc[0]").
This was introduced to accommodate servers that omit the trailing bcc[0]
overlap byte when no data area is present.
However, the exemption is applied unconditionally, regardless of whether
the command actually carries a data area (has_smb2_data_area[]). When a
response with a data area is subject to the +1 exemption, the reported
data can extend one byte beyond the bytes actually received, yet
smb2_check_message() still accepts it. The subsequent decoder then reads
past the end of the receive buffer. This is reachable during NEGOTIATE
and SESSION_SETUP, before the session is established.
The resulting out-of-bounds reads are visible under KASAN when mounting
against a non-conforming server; both the SPNEGO/negTokenInit and the
NTLMSSP challenge decoders are affected:
BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00
Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81
CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
asn1_ber_decoder+0x16a7/0x1b00
decode_negTokenInit+0x19/0x30
SMB2_negotiate+0x31d9/0x4c90
cifs_negotiate_protocol+0x1f2/0x3f0
cifs_get_smb_ses+0x93f/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 85:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 0 bytes to the right of
allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0)
which belongs to the cache cifs_small_rq of size 448
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50
Read of size 329 at addr ffff88800726c678 by task mount.cifs/89
CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
kasan_check_range+0x10f/0x1e0
__asan_memcpy+0x23/0x60
kmemdup_noprof+0x36/0x50
decode_ntlmssp_challenge+0x457/0x680
SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0
SMB2_sess_setup+0x219/0x4f0
cifs_setup_session+0x248/0xaf0
cifs_get_smb_ses+0xf79/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 93:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 120 bytes inside of
allocated 448-byte region [ffff88800726c600, ffff88800726c7c0)
which belongs to the cache cifs_small_rq of size 448
Restrict the +1 exemption to responses that have no data area, so that
it still covers the bcc[0] omission it was meant for. When a data area
is present, the +1 discrepancy instead means the reported data length
overruns the received buffer, so the response must be rejected.
Fixes: 093b2bdad3 ("CIFS: Make demultiplex_thread work with SMB2 code")
Cc: stable@vger.kernel.org
Signed-off-by: Shoichiro Miyamoto <shoichiro.miyamoto@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The push_seq argument to xlog_cil_push_now() carries a CIL checkpoint
sequence number, not a log sequence number (LSN).
Change the parameter type from xfs_lsn_t to xfs_csn_t to correctly
reflect its semantics and match the surrounding types. Both types are
int64_t under the hood, so this is a type-annotation fix with no
behavioural change.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The zoned sysfs directory is currently registered as part of the generic
per-mount sysfs setup, but the data exposed by nr_open_zones has a
narrower lifetime. mp->m_zone_info is allocated by xfs_mount_zones() and
freed by xfs_unmount_zones(), while the zoned sysfs kobject remained
registered until xfs_mount_sysfs_del().
A read of nr_open_zones can therefore enter through the still-live sysfs
kobject after xfs_unmount_zones() has freed mp->m_zone_info, leading to a
use-after-free in nr_open_zones_show().
Make the zoned sysfs lifetime match the zone-info lifetime inside the zone
allocator. Create the zoned sysfs directory from xfs_mount_zones() after
the zone allocator has finished setting up, and remove it as the first
step of xfs_unmount_zones(), before any zone allocator teardown can free
m_zone_info.
Sysfs removal deactivates the kernfs nodes and waits for active callbacks
to drain before returning, so this also protects a reader that has already
entered nr_open_zones_show() but has not yet dereferenced m_zone_info.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in nr_open_zones_show+0x86/0x90
The buggy address belongs to the object at ffff88810b177800 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 160 bytes inside of freed 1024-byte region
[ffff88810b177800, ffff88810b177c00)
Read of size 4
Call trace:
print_report+0xcd/0x620
nr_open_zones_show+0x86/0x90 (fs/xfs/xfs_sysfs.c:724)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x20c/0x410
kasan_report+0xdd/0x110
sysfs_kf_seq_show+0x1bd/0x380
seq_read_iter+0x40f/0x11b0
lock_release+0xba/0x260
mark_held_locks+0x40/0x70
vfs_read+0x717/0xce0
__up_read+0x319/0x900
ksys_read+0xf8/0x1c0
do_user_addr_fault+0x3d0/0xbc0
trace_hardirqs_on_prepare+0x23/0xf0
do_syscall_64+0xc8/0x530 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x74/0x7c
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kmalloc_cache_noprof+0x205/0x460
xfs_mount_zones+0x34c/0x2650
xfs_mountfs+0x1b97/0x1eb0
xfs_fs_fill_super+0xf2b/0x18a0
get_tree_bdev_flags+0x310/0x590
vfs_get_tree+0x8d/0x2e0
__x64_sys_fsconfig+0x61c/0xbc0
do_syscall_64+0xc8/0x530 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x74/0x7c
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x20e/0x4c0
xfs_unmountfs+0x2fd/0x390
xfs_fs_put_super+0x60/0x110
generic_shutdown_super+0x143/0x4b0
kill_block_super+0x3b/0x90
xfs_kill_sb+0x12/0x50
deactivate_locked_super+0xa7/0x160
cleanup_mnt+0x218/0x420
task_work_run+0x11a/0x1f0
exit_to_user_mode_loop+0x13c/0x4f0
do_syscall_64+0x4a9/0x530 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x74/0x7c
Fixes: 62c89988dc ("xfs: expose the number of open zones in sysfs")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
If the first op of a transaction is a bare transaction header
(len == sizeof(struct xfs_trans_header)), xlog_recover_add_to_trans()
adds an item but no region, leaving it on r_itemq with ri_cnt == 0 and
ri_buf == NULL.
The header can be split across op records, so later ops may still add
regions; the item is only invalid if the transaction commits with none.
The runtime commit path never emits such a transaction, so this only
happens on a crafted log. It came from an AI-assisted code audit of the
recovery parser.
xlog_recover_reorder_trans() calls ITEM_TYPE() on the item, which reads
*(unsigned short *)item->ri_buf[0].iov_base and faults on the NULL
ri_buf. Reject it there, before the commit handlers that also read
ri_buf[0].
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:xlog_recover_reorder_trans (fs/xfs/xfs_log_recover.c:1836)
xlog_recover_commit_trans (fs/xfs/xfs_log_recover.c:2043)
xlog_recover_process_data (fs/xfs/xfs_log_recover.c:2501)
xlog_do_recovery_pass (fs/xfs/xfs_log_recover.c:3244)
xlog_recover (fs/xfs/xfs_log_recover.c:3493)
xfs_log_mount (fs/xfs/xfs_log.c:618)
xfs_mountfs (fs/xfs/xfs_mount.c:1034)
xfs_fs_fill_super (fs/xfs/xfs_super.c:1938)
vfs_get_tree (fs/super.c:1695)
path_mount (fs/namespace.c:4161)
__x64_sys_mount (fs/namespace.c:4367)
Fixes: 89cebc8477 ("xfs: validate transaction header length on log recovery")
Cc: stable@vger.kernel.org # v4.3
Reported-by: Xiang Mei <xmei5@asu.edu>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Commit e1f3a00670 ("m68k: coldfire: use ColdFire specifc IO access in
SoC code") incorrectly updated a couple of local IO access uses. They
use "read8" when they should be using the new "mcf_read8". Fix them.
This causes compile time breakage for two specific SoC types, the ColdFire
5235 and 5282. They got missed in original testing due to not having
any defconfigs for these specific parts.
Fixes: e1f3a00670 ("m68k: coldfire: use ColdFire specifc IO access in SoC code")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607040536.BiSGmESw-lkp@intel.com/
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Eric Dumazet says:
====================
ipv4/ipv6: Fix UAF and memory leak in IGMP/MLD
This series addresses two potential UAF vulnerabilities
and memory leaks in the IPv4 IGMP and IPv6 MLD subsystems.
The first two patches fix a UAF where the packet receive path races with
device teardown. If the device refcount has already hit 0 (but the memory
is still held by RCU), incoming IGMP/MLD packets trying to schedule delayed
work or timers would call refcount_inc() on the 0 refcount, triggering a
warning and eventually leading to a UAF when the work runs after the device
has been freed. This is fixed by introducing safe hold helpers using
refcount_inc_not_zero(). In MLD, we also ensure we only enqueue the skb
if we successfully acquired the device reference, to avoid leaking skbs
when the device is being destroyed.
The third patch fixes memory leaks in IPv4 IGMP when timers are deleted or
stopped. When a timer is deleted (in igmp_mod_timer) or stopped (in
igmp_stop_timer) and not re-armed, the code dropped the group refcount using
refcount_dec(). However, if the group was concurrently removed from the list,
this decrement could drop the refcount to 0 without triggering the
cleanup/free path, leaking the group structure. This is fixed by using
ip_ma_put() instead, and deferring the put until after the lock is released.
====================
Link: https://patch.msgid.link/20260705181756.963063-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a timer is deleted and not re-armed in igmp_mod_timer(), or stopped
in igmp_stop_timer(), the code currently decrements the reference counter
of the multicast list entry @im using refcount_dec(&im->refcnt).
However, both functions can be called from the RCU reader path:
- igmp_mod_timer() via igmp_heard_query() -> for_each_pmc_rcu()
- igmp_stop_timer() via igmp_rcv() -> igmp_heard_report()
If the group im was concurrently removed from the list by ip_mc_dec_group(),
its reference count might have already been decremented to 1.
In this case, timer_delete() succeeds, and refcount_dec() decrements
the refcount from 1 to 0. Since refcount_dec() does not free the object
when it hits 0 (unlike ip_ma_put()), the im structure is leaked.
Fix this by using ip_ma_put(im) instead of refcount_dec(&im->refcnt),
and deferring the put until after the spinlock is released.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A race condition exists between device teardown and incoming MLD query
processing, leading to a Use-After-Free in the MLD delayed work.
During device destruction, the primary reference to inet6_dev is dropped,
which can drop its refcount to 0. The actual freeing of inet6_dev memory
is deferred via RCU.
Concurrently, the packet receive path runs under RCU read lock and obtains
the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can
safely dereference inet6_dev even if its refcount has hit 0.
However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it
attempts to acquire a reference using in6_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the inet6_dev memory is still scheduled to be freed after the RCU
grace period, the device is freed while the work is still scheduled.
When the work runs, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in6_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not schedule the work.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A race condition exists between device teardown (inetdev_destroy) and
incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free
in the IGMP timer callback.
During device destruction, inetdev_destroy() drops the primary reference
to in_device, which can drop its refcount to 0. The actual freeing of
in_device memory is deferred via RCU (using call_rcu()).
Concurrently, igmp_rcv() runs under RCU read lock and obtains the
in_device pointer. Because the memory is RCU-protected, CPU-0 can safely
dereference in_device even if its refcount has hit 0.
However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it
attempts to acquire a reference using in_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the in_device memory is still scheduled to be freed after the RCU
grace period (as the free callback does not check the refcount again),
the device is freed while the timer is still armed. When the timer
expires, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not arm the timer.
A similar issue in IPv6 MLD is fixed in a subsequent patch.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The typec_altmode structure contains a 'struct device' object
that cannot be allocated on the stack because of its size, even
when ignoring the lifetime rules:
drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c:326:13: error: stack frame size (1456) exceeds limit (1280) in 'gaokun_ucsi_usb_notify_ind' [-Werror,-Wframe-larger-than]
326 | static void gaokun_ucsi_usb_notify_ind(struct gaokun_ucsi *uec)
Since the altmode is always associated with a port here, move
it into the port object and avoid at least the stack allocation
issue.
Fixes: 1c2b66a7d7 ("usb: ucsi: huawei_gaokun: support mode switching")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://patch.msgid.link/20260618143341.1900221-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irq_alloc_domain_generic_chips() allocates generic chip data that must
be freed via irq_domain_remove_generic_chips(). The devres action
mvebu_gpio_remove_irq_domain() only called irq_domain_remove(), which
only frees the generic chips if IRQ_DOMAIN_FLAG_DESTROY_GC is set.
Call irq_domain_remove_generic_chips() explicitly before
irq_domain_remove() instead.
Fixes: 812d47889a ("gpio/mvebu: Use irq_domain_add_linear")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260707232358.1218077-1-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
rt1711h_probe() registers the TCPCI port before requesting the interrupt
and enabling alert interrupts. If either of those later steps fails, the
probe function returns without unregistering the TCPCI port. The explicit
unregister currently only happens from the remove callback.
Register a devres action immediately after tcpci_register_port() succeeds,
so tcpci_unregister_port() runs on later probe failures and on driver
detach. Drop the remove callback to avoid unregistering the same port
twice.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 302c570bf3 ("usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260706145312.37260-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VDO() second parameter is VDM type (bit 15): 1 for SVDM, 0 for UVDM.
Using 'vdo ? 2 : 1' corrupts SVID low bit when vdo is non-NULL
(2 << 15 = BIT(16)). Enter Mode is always SVDM, hardcode to 1.
Fixes: 8face9aa57 ("usb: typec: Add parameter for the VDO to typec_altmode_enter()")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260604105059.18750-1-andyshrk@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On a Dell XPS 13 9360 (BIOS 2.21.0), entering system suspend (deep/S3)
races a pending UCSI connector-change worker against the ACPI EC teardown.
The worker evaluates the UCSI _DSM (GET_CONNECTOR_STATUS), whose AML
accesses the Embedded Controller. By that point the ACPI EC has already
been stopped for suspend, so the EC address space handler rejects the
access with AE_BAD_PARAMETER, aborting the AML and failing the connector
query:
[22314.689495] ACPI: EC: interrupt blocked
[22314.711981] ACPI: PM: Preparing to enter system sleep state S3
[22314.743260] ACPI: EC: event blocked
[22314.743265] ACPI: EC: EC stopped
[22314.743267] ACPI: PM: Saving platform NVS memory
[22314.744241] ACPI Error: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20260408/evregion-303)
[22314.744432] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV.ECW1 due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.744673] ACPI Error: Aborting method \ECWB due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.745201] ACPI Error: Aborting method \_SB.UBTC._DSM due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.745394] ACPI: \_SB_.UBTC: failed to evaluate _DSM c298836f-a47c-e411-ad36-631042b5008f rev:1 func:1 (0x1001)
[22314.745414] ucsi_acpi USBC000:00: ucsi_acpi_dsm: failed to evaluate _DSM 1
[22314.745424] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
ucsi_acpi implements a resume callback but no suspend callback, so nothing
cancels the connector-change work before the firmware/EC is torn down.
Add a `ucsi_suspend()` core helper that cancels the pending init and
connector-change work, and wire it into ucsi_acpi's PM ops. The connector
state is re-read on resume by `ucsi_resume()`, so cancelling the work loses
nothing.
Fixes: 4e3a50293c ("usb: typec: ucsi: acpi: Implement resume callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Assisted-by: Claude Opus 4.8
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260703110738.8457-2-pmenzel@molgen.mpg.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_power_delivery_find() wraps class_find_device_by_name(). That helper
returns a device reference that must be released by the caller.
select_usb_power_delivery_store() only needs this reference while calling
the pd_set callback. Drop it once the callback returns. Otherwise the sysfs
write can pin the selected USB Power Delivery object and prevent it from
being released on unregister.
Fixes: a7cff92f06 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable <stable@kernel.org>
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Link: https://patch.msgid.link/20260702191329.2648043-1-shuangpeng.kernel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 6bebd9b777 ("usb: typec: ps883x: Rework ps883x_set()") introduced
two regressions:
1. The CONN_STATUS_0_USB_3_1_CONNECTED bit is mistakenly written to the
wrong configuration register (cfg1 instead of cfg0). This breaks USB3
when using USB3+DP adapters.
2. The switch-case fallthrough block is inverted: Currently,
TYPEC_DP_STATE_C (DP-only) inherits the USB3 configuration, while
TYPEC_DP_STATE_D (DP+USB3) is missing the necessary DP sink flags.
Fix these by writing the USB3 bit to the correct register and swapping the
case statement order so both states get their correct bits assigned.
Cc: stable <stable@kernel.org>
Fixes: 6bebd9b777 ("usb: typec: ps883x: Rework ps883x_set()")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260601-ps883x-usb3dp-fixes-v1-1-d19bec3a6d26@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a USB device with active stream endpoints is disconnected,
xhci_free_streams() is called from the hub_event workqueue to
free the stream resources. It calls xhci_free_stream_info()
while holding xhci->lock with irqs disabled.
xhci_free_stream_info() invokes xhci_free_stream_ctx(), which
calls dma_free_coherent() for large stream context arrays.
dma_free_coherent() can sleep (e.g. via vunmap), triggering
a BUG when called from atomic context.
Call trace:
dma_free_attrs+0x174/0x220
xhci_free_stream_info+0xd0/0x11c
xhci_free_streams+0x278/0x37c
usb_free_streams+0x98/0xc0
usb_unbind_interface+0x1b8/0x2f8
device_release_driver_internal+0x1d4/0x2cc
device_release_driver+0x18/0x28
bus_remove_device+0x160/0x1a4
device_del+0x1ec/0x350
usb_disable_device+0x98/0x214
usb_disconnect+0xf0/0x35c
hub_event+0xab4/0x19ec
process_one_work+0x278/0x63c
Fix this by saving the stream_info pointers and clearing the
ep references under the lock, then calling xhci_free_stream_info()
outside the lock where sleeping is allowed.
Fixes: 8df75f42f8 ("USB: xhci: Add memory allocation for USB3 bulk streams.")
Cc: stable <stable@kernel.org>
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260703144033.483286-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_ring_to_sgtable() allocates a temporary pages array and
uses it to build the returned sg_table with
sg_alloc_table_from_pages().
The error paths free the pages array, but the success path
returns the sg_table without freeing it. This leaks the temporary
array every time a sideband client gets an endpoint or event ring
buffer.
Free the pages array after sg_alloc_table_from_pages() succeeds.
The returned sg_table has its own scatterlist entries and does not
depend on the temporary array after construction.
Fixes: de66754e9f ("xhci: sideband: add initial api to register a secondary interrupter entity")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260703144033.483286-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The udc structure acts as the management structure for the gadget,
but their lifecycles are decoupled. A race condition exists where
usb_del_gadget() frees the udc memory (e.g., via mode-switch work)
while gadget_match_driver() concurrently accesses the freed udc memory
(e.g., via configfs), causing a Use-After-Free (UAF) that triggers a
NULL pointer dereference when the freed memory is zeroed:
[39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140
[39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60
...
[39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8
[39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140
[39430.931308][ T1171] configfs_write_iter+0xec/0x134
[39430.957058][ T1171] Workqueue: events_freezable __dwc3_set_mode
[39430.957287][ T1171] dwc3_gadget_exit+0x34/0x8c
[39430.957304][ T1171] __dwc3_set_mode+0xc0/0x664
Fix this by ensuring the udc structure remains allocated until the
gadget is released. To achieve this, introduce a new
usb_gadget_release() routine to the core. When the gadget is added,
usb_add_gadget() stores the gadget's release routine in the udc
structure and takes a reference to the udc. When the gadget is
released, usb_gadget_release() drops the reference to the udc and
then calls the gadget's release routine.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260625073705.803880-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls
dwc3_disconnect_gadget(). For async callbacks that helper only uses
plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback
still runs with IRQs disabled and any sleepable callback trips Lockdep.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the dwc3_gadget_suspend() ->
dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and
Lockdep reported:
BUG: sleeping function called from invalid context
gadget_disconnect+0x21/0x39 [vuln_msv]
dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv]
Keep the disconnect callback selection in one common helper, but add a
sleepable suspend-side wrapper which snapshots the callback under
dwc->lock and then runs it after spin_unlock_irqrestore(). The regular
event path still uses the existing spin_unlock()/spin_lock() window.
Fixes: c8540870af ("usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()")
Cc: stable <stable@kernel.org>
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260612052005.3849659-1-runyu.xiao@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sl811h_probe() enables the HCD controller device as a wakeup source after
usb_add_hcd() succeeds, but sl811h_remove() removes the HCD and releases
the driver resources without disabling that wakeup source.
Disable controller wakeup after usb_remove_hcd() and before usb_put_hcd()
so the wakeup source object is detached while the controller device pointer
is still available.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 3c9740a117 ("usb: hcd: move controller wakeup setting initialization to individual driver")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260701121625.96815-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
anx7411_i2c_probe() enables runtime PM before returning successfully, but
anx7411_i2c_remove() tears down the Type-C partner state, workqueue, dummy
I2C device, mux, switch and port without disabling runtime PM.
Use devm_pm_runtime_enable() so runtime PM is disabled automatically on
driver detach. Since devres action registration can fail, route that
failure through the existing probe unwind path.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: fe6d8a9c8e ("usb: typec: anx7411: Add Analogix PD ANX7411 support")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260701114006.75738-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dwc3_ulpi_setup() calls the register read and write calls with
dwc3->regs when both these calls take the dwc3 structure directly.
Chnage these two calls to fix the following sparse warning, and
possibly a nasty bug in the dwc3_ulpi_setup() code:
drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc
drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs
drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc
drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs
Cc: stable <stable@kernel.org>
Fixes: 9accc68b1c ("usb: dwc3: Add dwc pointer to dwc3_readl/writel")
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://patch.msgid.link/20260703162033.2847599-1-ben.dooks@codethink.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uss720_probe() registers a parport before reading the 1284 register used
to detect unsupported Belkin F5U002 adapters. If get_1284_register()
fails, the error path drops the driver private data and the USB device
reference, but leaves the parport device registered.
Leaving the port registered is more than a private allocation leak:
parport_register_port() has already reserved a parport number and
registered the parport bus device, while pp->private_data still points at
the private data that the common error path is about to release.
Undo the pre-announce registration in the get_1284_register() failure
branch before jumping to the common private-data cleanup path. Clear
priv->pp first, matching the disconnect path and avoiding a stale pointer
in the private data.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 3295f1b866 ("usb: misc: uss720: check for incompatible versions of the Belkin F5U002")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Alex Henrie <alexhenrie24@gmail.com>
Link: https://patch.msgid.link/20260706151049.63470-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a length check for the rndis header in rndis_rm_hdr, to ensure that
MessageType, MessageLength, DataOffset, and DataLength fields are
present before they are accessed.
Assisted-by: gkh_clanker_2000
Cc: stable <stable@kernel.org>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Link: https://patch.msgid.link/20260708-usb-gadget-rndis-v1-2-e77e026dcc6a@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add variable representations for BufLength and BufOffset in
rndis_query_response(), and perform a length check on them.
This is identical to how rndis_set_response() handles these parameters.
Assisted-by: gkh_clanker_2000
Cc: stable <stable@kernel.org>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Link: https://patch.msgid.link/20260708-usb-gadget-rndis-v1-1-e77e026dcc6a@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
EHCI and FOTG210 isochronous submits build an ehci_iso_sched before
linking the URB to the endpoint queue, and keep the staged schedule in
urb->hcpriv until iso_stream_schedule() and the link helpers consume it.
If the controller is no longer accessible, or usb_hcd_link_urb_to_ep()
fails, submit jumps to done_not_linked before that handoff happens and
leaks the staged schedule still attached to urb->hcpriv.
Free the staged schedule from done_not_linked when submit fails before
the URB is linked and clear urb->hcpriv after the free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
EHCI host controller with a USB isochronous device to test with, no
runtime testing was able to be performed.
Fixes: 8de9840265 ("[PATCH] USB: Fix USB suspend/resume crasher (#2)")
Fixes: e9df41c5c5 ("USB: make HCDs responsible for managing endpoint queues")
Fixes: 7d50195f6c ("usb: host: Faraday fotg210-hcd driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260630071419.349161-1-dawei.feng@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 1892bf9067 ("USB: usb-storage: Fix use of bitfields for
hardware data in ene_ub6250.c") converted the media status fields from
bitfields to bit masks.
The original ene_transport() test called ene_init() only when neither
media type was ready:
!(sd_ready || ms_ready)
The converted test became:
!sd_ready || ms_ready
This is not equivalent. Restore the original semantics by testing that
both ready bits are clear before calling ene_init().
Fixes: 1892bf9067 ("USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/F42641386E32404F+20260626070607.4119527-1-raoxu@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
printer_open() returns -EBUSY when the character device is already
open, but it increments dev->kref regardless of the return value. VFS
does not call ->release() for a failed open, so every rejected second
open permanently leaks one reference.
Move kref_get() into the successful-open branch.
Fixes: e8d5f92b8d ("usb: gadget: function: printer: fix use-after-free in __lock_acquire")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/80295742B820DA9B+20260626064617.4090626-1-raoxu@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vep_alloc_request() wasn't initializing vrequest->udc, so cancellations
on the FunctionFS AIO path were arriving in vep_dequeue without a valid
UDC reference.
Since vrequest->udc is never actually properly used anywhere, we opt to
remove it, and update vep_dequeue to obtain a reference to the udc with
ep_to_vudc(), consistent with the other vep_ ops.
AFAICT this bug has existed for ~10 years. Seems that nobody has really
stressed the FunctionFS AIO path on usbip's vudc.
I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints
via AIO. Before the fix, running `usbip attach` from the host would
cause the guest to oops with the following backtrace:
Call trace:
vep_dequeue+0x1c/0xe4 (P)
usb_ep_dequeue+0x14/0x20
ffs_aio_cancel+0x24/0x34
__arm64_sys_io_cancel+0xb0/0x124
do_el0_svc+0x68/0x100
el0_svc+0x18/0x5c
el0t_64_sync_handler+0x98/0xdc
el0t_64_sync+0x154/0x158
Assisted-by: opencode:openai/gpt-5.5
Cc: stable <stable@kernel.org>
Fixes: b6a0ca1118 ("usbip: vudc: Add UDC specific ops")
Reviewed-by: Igor Kotrasinski <i.kotrasinsk@samsung.com>
Signed-off-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20260626-usbip-vudc-deque-fix-v3-1-98c2dc4d6a48@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB devices running at SuperSpeedPlus report "10000" or "20000" in
their sysfs speed attribute. usbip currently maps only "5000" to
USB_SPEED_SUPER, so a SuperSpeedPlus device is imported as
USB_SPEED_UNKNOWN.
The attach request is then rejected by vhci_hcd:
vhci_hcd: Failed attach request for unsupported USB speed: UNKNOWN
Map the SuperSpeedPlus sysfs speed values to USB_SPEED_SUPER_PLUS, use
the SuperSpeed VHCI hub for SuperSpeedPlus devices, and recognize the
gadget current_speed string used by the kernel.
Fixes: b2316645ca ("usb: show speed "10000" in sysfs for USB 3.1 SuperSpeedPlus devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/00C828F338E43447+20260617020613.199086-1-chenyichong@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the UCSI Specification Revision 3.1 RC1, bits 32-63 of the SET_NEW_CAM
command hold the 32-bit Alternate Mode Specific (AMSpecific) field.
For DisplayPort Alternate Mode, this field must contain the full
32-bit DisplayPort configuration VDO payload that the OPM wants the
connector to operate in, rather than just the pin assignment value.
This AMSpecific value follows the DisplayPort Configurations defined
in the DisplayPort Alt Mode on USB Type-C Specification v2.1a,
Table 5-13: SOP DisplayPort Configurations.
Fixes: af8622f6a5 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Madhu M <madhu.m@intel.com>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260619153311.3526083-1-madhu.m@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ravi Hothi <ravi.hothi@oss.qualcomm.com> says:
This series adds audio support for the Qualcomm Eliza SoC. Eliza uses
the same LPASS macro codec hardware as SM8550, so the existing SM8550
fallback compatible is reused for all four macro codecs (RX, TX, VA,
WSA). The sound card is compatible with the SM8450 generation machine
driver.
Patch 1 documents the Eliza LPASS macro codec compatibles in the
dt-bindings for RX, TX, VA and WSA macros.
Patch 2 documents the Eliza sound card compatible.
Patch 3 adds the Eliza sound card entry to the machine driver.
Link: https://patch.msgid.link/20260703073434.2589657-1-ravi.hothi@oss.qualcomm.com
Add bindings for Eliza sound card, which is compatible with
the existing SM8450.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260703073434.2589657-3-ravi.hothi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for Qualcomm Eliza LPASS RX, TX, VA and WSA macro codecs,
which are compatible with the existing SM8550 generation.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Link: https://patch.msgid.link/20260703073434.2589657-2-ravi.hothi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HP Laptop 15-fd0xxx uses GPIO bit 0 to control the mic mute LED,
but currently the quirk only enables the speaker mute LED (via coef
bit). Switch to the existing ALC236_FIXUP_HP_MUTE_LED_MICMUTE_GPIO
fixup which additionally registers a GPIO-based mic mute LED, mapping
to the same verbs (SET_GPIO_DATA/SET_GPIO_DIRECTION bit 0) that the
platform firmware uses.
Signed-off-by: Kshamendra Kumar Mishra <kshamendrakumarmishra@gmail.com>
Link: https://patch.msgid.link/DJSOWKFBTJH8.2Z7EPWX514QXM@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mute LED on HP Victus 15-fa0xxx (board ID 8A50) uses ALC245 but
requires a quirk to work. This patch enables the existing
ALC245_FIXUP_HP_MUTE_LED_COEFBIT quirk for the device.
Tested on my HP Victus 15-fa0xxx. The LED behaviour works as intended.
Signed-off-by: Rohit Sinha <rohitsinha12043@gmail.com>
Link: https://patch.msgid.link/20260706211834.384022-1-rohitsinha12043@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The device with USB ID 040b:0897 (Weltrend Semiconductor chipset,
sold rebranded as the Redragon H510-PRO Wireless headset, reporting
"XiiSound Technology Corporation" in its USB string descriptors)
reports a constant value on GET_CUR for its PCM Playback Volume
control while still supporting an actually tunable volume. This
trips the sticky-value detection in check_sticky_volume_control(),
which disables the mixer control entirely:
usb 1-4: 5:0: sticky mixer values (0/100/1 => 80), disabling
As a result, the device boots with playback volume effectively muted
and provides no way to raise it through the normal ALSA/PipeWire
mixer path.
Apply QUIRK_FLAG_MIXER_GET_CUR_BROKEN so the sticky check marks the
control as get_cur_broken and relies on the cached value instead of
disabling the mixer control outright.
Tested by backporting this quirk flag and the supporting
get_cur_broken logic onto a Linux 7.1.2-zen kernel build that does
not yet carry it, and confirming that after applying the flag the
kernel log changes from
usb 1-4: 5:0: sticky mixer values (0/100/1 => 80), disabling
to
usb 1-4: 5:0: broken mixer GET_CUR (0/100/1 => 80)
with the control usable via the driver's cached value afterward.
Signed-off-by: Agustin Luzardo <agustinluzardo09@gmail.com>
Link: https://patch.msgid.link/20260705184227.113588-1-agustinluzardo09@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Branch Sampling (BRS) and Last Branch Record (LBR) are mutually
exclusive hardware features, and users of both are tracked via
cpuc->lbr_users.
When SVM is toggled on a CPU, the host perf events are reprogrammed to
update the HostOnly filter bit (set when virtualization is enabled,
cleared when it is disabled). On PerfMonV2-capable processors, this
reprogramming is performed by calling amd_pmu_enable_all() to rewrite
the event selectors. However, amd_pmu_enable_all() also calls
amd_brs_enable_all(), which enables BRS whenever cpuc->lbr_users > 0.
Having active LBR events satisfies this gating on processors that have
LBR but not BRS. The kernel then tries to set the BRS enable bit in
DebugExtnCfg (MSR 0xc000010f). Since that bit is deprecated on such
hardware, the write results in a #GP:
Call Trace:
<IRQ>
amd_pmu_enable_all+0x1d/0x90
amd_pmu_disable_virt+0x62/0xb0
kvm_arch_disable_virtualization_cpu+0xa/0x40 [kvm]
hardware_disable_nolock+0x1a/0x30 [kvm]
__flush_smp_call_function_queue+0x9b/0x410
__sysvec_call_function+0x18/0xc0
sysvec_call_function+0x69/0x90
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
RIP: 0010:cpuidle_enter_state+0xc4/0x450
? cpuidle_enter_state+0xb7/0x450
cpuidle_enter+0x29/0x40
cpuidle_idle_call+0xf5/0x160
do_idle+0x7b/0xe0
cpu_startup_entry+0x26/0x30
start_secondary+0x115/0x140
secondary_startup_64_no_verify+0x194/0x19b
</TASK>
Fix this by ensuring that BRS is not enabled from the event selector
reprogramming path even when cpuc->lbr_users > 0.
Fixes: bae19fdd7e ("perf/x86/amd/core: Fix reloading events for SVM")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/702fa204d574b03d14e3664c7d4b201db048bbfd.1783506528.git.sandipan.das@amd.com
Currently, configuring a VF MAC address via the PF (e.g., 'ip link
set <pf> vf 0 mac <mac>') blindly attempts to install a DMAC-based
hardware filter. However, the hardware parser profile might not
support DMAC extraction.
Check if the hardware parsing profile supports DMAC extraction
before adding the filter. Additionally, emit a warning message
to inform the operator if the MAC filter installation fails due
to missing DMAC extraction support. Update config->mac only
after hardware programming succeeds in otx2_set_vf_mac().
Fixes: f0c2982aaf ("octeontx2-pf: Add support for SR-IOV management functions")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260702033451.2969880-1-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
CAKE accepts signed overhead values and stores them in an s16, but the
adjusted packet length calculation uses unsigned arithmetic. A negative
effective length can therefore wrap to a large value.
Such configurations make rate accounting depend on integer wraparound
rather than on the packet size userspace intended to model. A static
netlink lower bound is not enough because packets reaching CAKE can be
smaller than any reasonable manual-overhead allowance.
Fold the signed overhead adjustment into the existing datapath MPU clamp
so negative adjusted lengths are clamped before link-layer framing
adjustments.
Fixes: a729b7f0bd ("sch_cake: Add overhead compensation support to the rate shaper")
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260702000758.297407.e5c888d9d99d.cake-overhead-underflow@trailofbits.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rtla started to only link parts of the tools library. It now misses the
ctype information used by all the related string operations. Just add
another single file to make it build again.
Signed-off-by: Bastian Blank <waldi@debian.org>
Fixes: 48209d763c ("rtla: Add libsubcmd dependency")
Link: https://lore.kernel.org/r/ako2S4mzIqWwYuas@steamhammer.waldi.eu.org
[ remove duplicated spaces in commit message ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
REGMAP_MMIO is a hidden (non-user-visible) tristate symbol. Using
depends on it is incorrect because there is no way for the user to
enable it directly. Change to select, which is the convention used
by every other driver in the tree that needs REGMAP_MMIO.
Fixes: 8057cbb833 ("net: mdio: mscc-miim: Add depend of REGMAP_MMIO on MDIO_MSCC_MIIM")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260702032653.1580616-1-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit c7f92042d3 ("selftests: gpio: Add gpio-cdev-uaf tests") added
the gpio-cdev-uaf binary to TEST_GEN_PROGS_EXTENDED but never added it
to .gitignore. Building it with:
make -C tools/testing/selftests/gpio TARGETS=gpio
leaves gpio-cdev-uaf as an untracked file.
Fixes: c7f92042d3 ("selftests: gpio: Add gpio-cdev-uaf tests")
Signed-off-by: Cihan Karadag <cihan.cihan@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260707235707.1349969-1-cihan.cihan@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
RISCV_HWPROBE_EXT_ZICFISS and RISCV_HWPROBE_EXT_ZICFILP are defined in
the hwprobe uAPI but are not documented in
Documentation/arch/riscv/hwprobe.rst. Add documentation for them.
Link: 302a2d45c2
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Guodong Xu <docular.xu@gmail.com>
Link: https://patch.msgid.link/20260701-rva23u64-hwprobe-v2-v5-3-2c61f94a695a@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
A handful of vendor-extension entries indent continuation lines with a
tab character, while the rest of hwprobe.rst uses spaces. In addition,
many list items align their continuation lines under the 'm' of
':c:macro:' (column 7) rather than under the item text (column 4), so
the file mixes several indentation styles.
Replace the tabs with spaces and align every list item's continuation
lines under the item text, giving the whole file one consistent style.
Whitespace-only change, no functional change.
[Guodong: extend from tabs->spaces to normalizing all continuation-line
indentation across the file]
Signed-off-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Guodong Xu <docular.xu@gmail.com>
Link: https://patch.msgid.link/20260701-rva23u64-hwprobe-v2-v5-2-2c61f94a695a@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
