Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL
pointer dereference in the device teardown path if ufs_rpmb_probe()
fails.
Fixes: b06b8c4214 ("scsi: ufs: core: Add OP-TEE based RPMB driver for UFS devices")
Co-developed-by: Jiazi Li <jiazi.li@transsion.com>
Signed-off-by: Jiazi Li <jiazi.li@transsion.com>
Signed-off-by: Ao Sun <ao.sun@transsion.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Link: https://patch.msgid.link/20260723034440.217-1-ao.sun@transsion.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
mpi3mr_fault_uevent_emit() runs from the fault watchdog and reset paths
where host I/O may already be blocked. GFP_KERNEL allocations here, both
the local kzalloc_obj() and the ones inside kobject_uevent_env() itself,
can trigger reclaim that waits on that blocked I/O and deadlock.
Use memalloc_noio_save()/restore() to cover the whole call instead of
just the local allocation.
Fixes: ec54b348f2 ("scsi: mpi3mr: Record and report controller firmware faults")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260724164630.924288-1-chandrakanth.patil%40broadcom.com
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://patch.msgid.link/20260724175231.935192-1-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The inner loop of ata_scsi_lpm_supported() uses the wrong variable when
iterating.
It should obviously use the link that we are currently iterating over,
rather than always using the host link.
ata_scsi_lpm_supported() is used to control if a user should be allowed
to change lpm policy (from the default) via sysfs.
Thus, this bug could potentially disallow users to change the LPM policy
for certain SATA devices via sysfs.
Cc: stable@vger.kernel.org
Fixes: 0060beec0b ("ata: libata-sata: Add link_power_management_supported sysfs attribute")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/linux-ide/20260728112200.B99F21F000E9@smtp.kernel.org/
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
According to a user report WDC WD100EFGX-68CPLN0 and WDC WD102KFBX-68M95N0
have problems with LPM.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220693
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND
programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must
not reset the LMAC RX PKIND or default TX parse config over the PF setup.
Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip
cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates
when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND.
Fixes: 94d942c5fb ("octeontx2-af: Config pkind for CGX mapped PFs")
Cc: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260722081229.1653619-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When target_get_sess_cmd() fails during session shutdown because
percpu_ref_tryget_live() returns false, the command keeps the
se_cmd->cmd_cnt pointer that __target_init_cmd() assigned earlier
without owning a reference. Final release through
target_release_cmd_kref() then issues an unmatched percpu_ref_put().
Commit 8e288be860 ("scsi: target: Pass in cmd counter to use during
cmd setup") moved the cmd_cnt assignment ahead of the reference
acquisition. Clear se_cmd->cmd_cnt whenever the initial
target_get_sess_cmd() fails in target_init_cmd() and
target_submit_tmr(), so release performs exactly one matching put per
acquired reference.
Fixes: 8e288be860 ("scsi: target: Pass in cmd counter to use during cmd setup")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260722-reference-count-underflow-in-target-v1-1-63ab664f12fd@nvidia.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There have been multiple reports of performance regressions caused by
commit 3c7ac40d73 ("scsi: ufs: core: Delegate the interrupt service
routine to a threaded IRQ handler"). Hence this revert.
This patch reverts most of the following commits:
* 3c7ac40d73 ("scsi: ufs: core: Delegate the interrupt service
routine to a threaded IRQ handler")
* 6475cfb81f ("scsi: ufs: core: Avoid IRQ thread wakeup during active
UIC command")
This patch preserves the following commits:
* 034d319c88 ("scsi: ufs: core: Fix interrupt handling for MCQ Mode")
* eabcac808c ("scsi: ufs: core: Fix IRQ lock inversion for the SCSI
host lock")
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: 孙魁 (Kui Sun) <kui.sun@unisoc.com>
Cc: André Draszik <andre.draszik@linaro.org>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: 3c7ac40d73 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: André Draszik <andre.draszik@linaro.org> # on Pixel 6
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/b70eb60a01f971bed68c42c5b555929db5f835df.1784135511.git.bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS RTC support schedules ufs_rtc_update_work to periodically update the
device RTC. The work can issue query commands and access the UFS host
controller.
A previous change moved the RTC work cancellation before the PRE_CHANGE
vendor suspend callback to close a race in the common suspend path.
However, the active-active path jumps directly to vops_suspend after
flushing exception handling work and therefore bypasses the
cancellation.
If the RTC work runs while the vendor suspend callback is gating or
otherwise changing hardware state, it can access the controller during
suspend and trigger an SError.
Cancel the RTC work before entering the vendor suspend callback in the
active-active path. Since this path now cancels the work, move the RTC
work scheduling outside the device and link state restoration block in
the resume path. This restarts RTC updates after an active-active
suspend and resume cycle.
Fixes: b0bd84c392 ("scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260714172726.1736967-1-lgs201920130244@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
resp_report_zones() sizes the reply buffer from the CDB allocation
length. The v3 fix rounds alloc_len up with ALIGN() before deriving the
descriptor count:
rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) -
RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD);
arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1);
For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to
0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit
and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which
passes the !arr check, and desc = arr + 64 is then dereferenced in the
loop -> out-of-bounds write / panic.
Clamp rep_max_zones to devip->nr_zones. The loop already stops at
sdebug_capacity (after nr_zones zones), so a report can never hold more
than nr_zones descriptors; the clamp does not change the report, it only
bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device
property that can never reach 0x100000000.
Fixes: 7db0e0c819 ("scsi: scsi_debug: Fix buffer size of REPORT ZONES command")
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260712183739.83915-1-security@auditcode.ai
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the iblock_execute_pr_out() function, PRO_PREEMPT,
PRO_PREEMPT_AND_ABORT, and PRO_RELEASE all perform callback capability
checks through ops->pr_clear. The error check allows unimplemented hooks
to pass through the gate, resulting dereferencing a NULL function
pointer.
Check whether the hooks that need to be called are supported.
Fixes: 394f811848 ("scsi: target: Add block PR support to iblock")
Signed-off-by: TanZheng <tanzheng@kylinos.cn>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260724075850.280699-1-kensanya@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a command times out while we have deferred non-NCQ commands waiting to
be issued, the SCSI EH task is not immediately woken up as the waiting
deferred commands are never issued nor completed, thus leaving the SCSI
host in a busy state (shost->host_failed != scsi_host_busy(shost)) which
prevents the SCSI EH task from being woken up. Eventually, when the
deferred commands also time out, the SCSI EH task is woken up and the
timeout processing occurs.
Avoid this unnecessary additional SCSI EH wake up time with the same
method as implemented in libata-scsi, using the eh_timed_out SCSI host
template operation. The function sas_eh_timed_out() implements this
operation and executes the function ata_scsi_retry_deferred_qc()
for SATA devices.
Co-developed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Modify atapi_qc_complete() to call ata_scsi_schedule_deferred_qc() to
ensure that any deferred queued command can execute. This is similar to
ata_scsi_qc_complete() function for regular ATA devices.
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
If a command times out while we have deferred non-NCQ commands waiting to
be issued, the SCSI EH task is not immediately woken up as the waiting
deferred commands are never issued nor completed, thus leaving the SCSI
host in a busy state (shost->host_failed != scsi_host_busy(shost)) which
prevents the SCSI EH task from being woken up. Eventually, when the
deferred commands also time out, the SCSI EH task is woken up and the
timeout processing occurs.
Avoid this unnecessary SCSI EH task wake-up additional time by scheduling
a retry of all waiting deferred QCs, using the eh_timed_out SCSI host
template operation. The function ata_scsi_eh_timed_out() is introduced to
implement this operation.
However, terminating deferred commands with DID_REQUEUE to force a retry
by calling the function ata_scsi_requeue_deferred_qc() may still keep the
SCSI host in a busy state because the block layer may immediately re-issue
these commands. The solution to this is to schedule libata EH for the
port which suffered the command timeout to prevent accepting any new
command. ata_scsi_requeue_deferred_qc() is modified to add a call to
ata_port_schedule_eh() for this purpose.
In addition to this change, ata_scsi_requeue_deferred_qc() is also
modified to take a new timedout_scmd scsi command argument which indicates
the SCSI command that timed out. With this additional argument,
ata_scsi_requeue_deferred_qc() can now also terminate with DID_TIME_OUT
any timed out deferred qc, which simplifies ata_scsi_cmd_error_handler().
In this case, ata_scsi_requeue_deferred_qc() returns SCSI_EH_DONE, with
this return value propagated back to the ata_scsi_eh_timed_out() operation
to indicate to scsi_timeout() that the timed out command was handled and
no further processing is needed.
For non-timed out deferred qc that need to be retried,
ata_scsi_requeue_deferred_qc() returns SCSI_EH_NOT_HANDLED, thus
indicating to scsi_timeout() that the timed out command needs to go
through the SCSI EH (and libata EH) processing by adding it to the EH work
queue with scsi_eh_scmd_add().
One side effect of these changes is that the function atapi_qc_complete()
needs to be modified to ensure that a deferred ATAPI command that needs
to be retried is completed with DID_REQUEUE instead of the default
SAM_STAT_GOOD status, and a command that timed out is completed with
DID_TIME_OUT instead of SAM_STAT_CHECK_CONDITION.
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
In phylink_create() if phylink_register_sfp() returns an error, link_gpio
obtained by phylink_parse_fixedlink() is never released. While this is a
very unlikely scenario, it's worth to fix/handle this.
This was present from the very first implementation of phylink but got
relevant only with the introduction of ce0aa27ff3 ("sfp: add sfp-bus to
bridge between network devices and sfp cages") where additional function
were added after phylink_parse_fixedlink() making the release of link_gpio
needed if such additional function errored out.
While at it, restructure the exit condition of phylink_create() with the
goto pattern to reduce code duplication on handling error conditions.
Fixes: ce0aa27ff3 ("sfp: add sfp-bus to bridge between network devices and sfp cages")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260726150806.2437-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is another occurrence of using getline where the code assumes that
getline allocates memory to store the line, but the pointer passed to it
is uninitialized and potentially a non-null pointer. This violates the
Open Group Spec[1] and caused a segfault in a similar situation in
selftest/clone3/clone3_set_tid. Fix it by initializing the line pointer
to NULL.
The issue has been found by simply grepping through the selftest code
after running into the issue in clone3_set_tid. Whether it segfaults in
its current state is unknown to me. But it's good to be addressed due to
defensive reasons.
Link: https://lore.kernel.org/20260722130246.2135563-3-christian.gellermann@codasip.com
Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1]
Fixes: 26b4224d99 ("selftests: expanding more mlock selftest")
Signed-off-by: Chris Gellermann <christian.gellermann@codasip.com>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests: Add missing initalization of pointer passed to
getline", v2.
This patch (of 2):
Clone3_set_tid uses getline(&line, ...) in a loop to read the child's
process status. The code expects that getline allocates the buffer for
the line on the first loop iteration. According to the Open Group
Spec[1], char *line has to be null pointer for this:
> ssize_t getline(char **restrict lineptr, ...);
> If *lineptr is a null pointer or if the object pointed to by *lineptr
> is of insufficient size, an object shall be allocated as if by
malloc()
> or the object shall be reallocated as if by realloc()[...].
However, char *line is only declared, leading to an undefined value that
is potentially non-null. In an example run with Musl v1.2.6, the realloc
call[2] of getdelim, which implements getline, triggers a segfault:
./run_kselftest.sh --test clone3:clone3_set_tid
[ 1366.165898] kselftest: Running tests in clone3
...
[ 1367.799244] clone3_set_tid[811]: unhandled signal 11 code 0x1 at
0x0000000000000000 in libc.so[68184,3fbf69f000+4c000]
[ 1367.802808] CPU: 0 UID: 0 PID: 811 Comm: clone3_set_tid Not tainted
..
[ 1367.804188] epc: 0x0000003fbf6b0184
[ 1367.804188] ra : 0x0000003fbf6d4664
[ 1367.804188] sp : 0x0000003fce5f2e40
[ 1367.805314] gp : 0x0000002aaab0dfb8
[ 1367.805314] tp : 0x0000003fbf6f14a8
[ 1367.805314] t0 : 0x0000003fbf63d000
...
Looking at the realloc implementation, Musl mallocs for a null pointer
memory. But for a non-null pointer, it assumes it's passed a valid
pointer to the heap and tries to access its meta-data. This leads to the
segfault we see:
void *realloc(void *p, size_t n)
{
if (!p) return malloc(n);
if (size_overflows(n)) return 0;
struct meta *g = get_meta(p);
...
}
Fix this by properly initializing the line pointer to NULL.
Link: https://lore.kernel.org/20260722130246.2135563-1-christian.gellermann@codasip.com
Link: https://lore.kernel.org/20260722130246.2135563-2-christian.gellermann@codasip.com
Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stdio/getdelim.c#n38 [2]
Fixes: 41585bbeee ("selftests: add tests for clone3() with *set_tid")
Signed-off-by: Chris Gellermann <christian.gellermann@codasip.com>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During PM freeze (e.g. S3 suspend or S4 hibernation), device drivers like
virtio_balloon reset their underlying virtio devices and delete their
virtqueues via vdev->config->del_vqs().
However, page reporting work (page_reporting_process) was scheduled on the
global system_wq. Because system_wq lacks the WQ_FREEZABLE flag, the PM
freezer skips it, leaving page_reporting_process active during suspend.
If pages are freed into the buddy allocator while suspending (for example,
when core MM invokes the balloon shrinker during S4 hibernation image
saving), page reporting triggers virtballoon_free_page_report() on deleted
virtqueues, resulting in a Use-After-Free / General Protection Fault:
[ 196.795226] general protection fault, probably for non-canonical address 0xaa1436fe70dae6df: 0000 [#1] SMP NOPTI
[ 196.825967] Workqueue: events page_reporting_process
[ 196.831038] RIP: 0010:virtqueue_add_split+0x233/0x4c0 [virtio_ring]
[ 196.927073] virtballoon_free_page_report+0x3a/0xe0 [virtio_balloon]
[ 196.946943] page_reporting_process+0x370/0x4f0
Fix this by switching page reporting work to system_freezable_wq. This
ensures that the PM freezer pauses page_reporting_process before device
drivers destroy their reporting virtqueues. Because the reporting worker
is frozen, memory reclamation/freeing (e.g. via shrinker execution) can
safely return pages to MM during freeze without triggering unfrozen
reporting work on deleted virtqueues.
This aligns with the driver's existing design. The comment in
virtballoon_freeze() states:
/*
* The workqueue is already frozen by the PM core before this
* function is called.
*/
Testing:
I have verified these fixes using Google’s virtualization infrastructure
by running continuous suspend/resume iterations (40+ cycles) while
churning memory using stress-ng (`stress-ng --vm 4 --vm-bytes 60%
--timeout 1`) to constantly create free pages for the buddy allocator. We
also set the `page_reporting_order` parameter to 0 to make the page
reporting worker highly sensitive, forcing it to pick up any 4K free
pages. This confirmed that the UAF crashes are no longer reproducible.
Link: https://lore.kernel.org/20260721005603.1710551-1-linkl@google.com
Fixes: 36e66c554b ("mm: introduce Reported pages")
Signed-off-by: Link Lin <linkl@google.com>
Suggested-by: David Hildenbrand (Arm) <david@kernel.org>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Proactive reclaim (triggered via memory.reclaim or node sysfs) checks for
pending signals in its outer loop in user_proactive_reclaim(). However,
the inner reclaim loops—specifically scanning cgroups in shrink_many()
and evicting/aging folios in try_to_shrink_lruvec()—can run for a long
time before returning to the outer loop, especially on systems with many
cgroups or large memory sizes.
During system suspend, the PM freezer attempts to freeze all tasks by
sending fake signals (setting TIF_SIGPENDING). Because the inner loops do
not check for pending signals, the proactive reclaim task can remain stuck
in kernel space for seconds, failing to enter the refrigerator in a timely
manner. This leads to suspend failures due to freeze timeouts, a behavior
observed on Android devices.
This latency issue is specific to proactive reclaim because of its large,
user-defined reclaim targets (could be gigabytes). Since commit
287d5fedb3 ("mm: memcg: use larger batches for proactive reclaim"),
proactive reclaim uses larger decaying batch sizes (starting at 1/4 of the
remaining target) to maintain throughput. This keeps the task in the
inner reclaim loop for extended periods. In contrast, reactive reclaim
(global/memcg) uses small targets (SWAP_CLUSTER_MAX, typically 32 pages),
allowing it to return to the outer loop and check signals frequently.
To fix this, add a signal_pending() check to should_abort_scan() for
proactive reclaim paths. Since should_abort_scan() is called within the
inner scanning and eviction loops, this allows proactive reclaim to abort
early and return to the outer loop in user_proactive_reclaim().
Additionally, return -ERESTARTSYS instead of -EINTR in
user_proactive_reclaim(). When interrupted by system suspend, returning
-ERESTARTSYS allows the task to enter the refrigerator and automatically
restart the syscall upon resume, making the freezer transparent to
userspace. For real signals, the signal layer will either restart the
syscall (if SA_RESTART is set) or return -EINTR to userspace.
This fix specifically targets Multi-Gen LRU (MGLRU). Classic LRU's scan
targets per iteration are strictly bounded by get_scan_count(), which
ensures it returns to the outer loop more frequently.
The check in should_abort_scan() is limited to proactive reclaim
(sc->proactive) to avoid inadvertently affecting reactive reclaim paths,
and is wrapped in unlikely() as it is a slow path.
Link: https://lore.kernel.org/20260720044103.905191-1-richardycc@google.com
Fixes: 287d5fedb3 ("mm: memcg: use larger batches for proactive reclaim")
Fixes: 94968384dd ("memcg: introduce per-memcg reclaim interface")
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Richard Chang <richardycc@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Martin Liu <liumartin@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Switch my entry in MAINTAINERS and .mailmap to my @linux.dev email address
Link: https://lore.kernel.org/20260721101811.115954-1-nico.pache@linux.dev
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Nico Pache (Red Hat) <nico.pache@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I am no longer at Google.
Link: https://lore.kernel.org/20260718172923.8297-1-peter@pcc.me.uk
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update MAINTAINERS and .mailmap to point to my gmail.com address:
burak.emir@gmail.com.
Link: https://lore.kernel.org/20260718151303.2649-1-burak.emir@gmail.com
Signed-off-by: Burak Emir <burak.emir@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__folio_split() keeps dereferencing the mapping after the split:
shmem_uncharge(mapping->host) and remap_page() while the folios are still
frozen/locked, and i_mmap_unlock_read(mapping) at the very end, after the
after-split folios have been unlocked and freed.
Nothing holds an inode reference across that. The split relies on @folio
-- which the beyond-EOF drop loop never removes, as it starts at
folio_next(folio) -- staying locked and in the page cache to hold off
eviction. But the unlock loop unlocks @folio before i_mmap_unlock_read()
runs. If the caller's @lock_at is a tail beyond EOF, as memory_failure()
passes when splitting a poisoned tail of a shmem THP that reaches past
i_size during truncation, it too is gone from the page cache; so once
@folio is unlocked no locked, in-cache folio pins the inode, and a
concurrent final iput() can evict and RCU-free it before
i_mmap_unlock_read() touches i_mmap_rwsem:
BUG: KASAN: slab-use-after-free in __up_read+0x634/0x790
i_mmap_unlock_read include/linux/fs.h:537 [inline]
__folio_split+0x732/0x1640 mm/huge_memory.c:4100
try_to_split_thp_page+0xab/0x390 mm/memory-failure.c:1675
memory_failure+0x1394/0x26e0 mm/memory-failure.c:2470
Freed by task 4601:
shmem_free_in_core_inode+0x54/0xb0 mm/shmem.c:5177
evict+0x57f/0xac0 fs/inode.c:870
Do every mapping dereference while @folio still pins the inode: drop
i_mmap_rwsem right after remap_page(), before the loop that unlocks and
frees the after-split folios, and clear @mapping so the exit path does not
unlock it again. shmem_uncharge() and remap_page() already run before
that point, so after this nothing past the unlock loop touches the inode
or the mapping.
This is now a rule the split depends on, alongside keeping @folio frozen
until the page cache is updated: no inode or mapping dereference once the
after-split folios start being unlocked.
Link: https://lore.kernel.org/20260716095424.471052-1-kirill@shutemov.name
Fixes: baa355fd33 ("thp: file pages support for split_huge_page()")
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reported-by: Hao Zhang <zhanghao1@kylinos.cn>
Closes: https://lore.kernel.org/linux-mm/20260710071344.GA106129@zh-pc
Co-developed-by: Hao Zhang <zhanghao1@kylinos.cn>
Signed-off-by: Hao Zhang <zhanghao1@kylinos.cn>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__folio_migrate_mapping() increments MTHP_STAT_NR_ANON for the destination
folio when `folio_test_anon(folio) && folio_test_large(folio)` is true.
However, hugetlb folios satisfy both conditions despite having a
completely separate accounting system — they use hugetlb_add_anon_rmap()
which does not touch mTHP stats, and their free path also bypasses the
mTHP decrement in __free_pages_prepare().
This causes MTHP_STAT_NR_ANON to be incremented on each hugetlb migration
without a corresponding decrement, permanently inflating the nr_anon
counter.
Add a !folio_test_hugetlb() check to __folio_migrate_mapping() so that
only actual mTHP folios are counted.
Link: https://lore.kernel.org/20260717064502.1980173-3-npache@redhat.com
Fixes: 5d65c8d758 ("mm: count the number of anonymous THPs per size")
Co-developed-by: David Hildenbrand <david@kernel.org>
Signed-off-by: David Hildenbrand <david@kernel.org>
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rakie Kim <rakie.kim@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: fix PMD level mTHP accounting bugs", v2.
While running selftests I noticed the PMD level per-mTHP stats (nr_anon)
remained elevated after each run. After further investigation I noticed
this accounting error occurs for both the migration.private_anon_htlb_test
and the HMM tests.
In the HMM case this is due to folio_add_new_anon_rmap() incrementing the
mTHP stats, but never containing a corresponding decrement in
free_zone_device_folio(). We solve this by making sure to decrement the
counter when freeing device memory.
In the migration case, we are incrementing this counter without first
checking whether this folio is a hugetlb folio, which relies on a separate
accounting system. We solve this by adding the proper hugetlb check
before incrementing this counter.
With these changes in place, the two tests no longer cause elevated PMD
level accounting issues.
This patch (of 2):
When a zone device folio is mapped as anonymous, folio_add_new_anon_rmap()
increments MTHP_STAT_NR_ANON. The corresponding decrement lives in
__free_pages_prepare() in page_alloc.c, but zone device folios are freed
via free_zone_device_folio() which never calls __free_pages_prepare().
This causes nr_anon to remain permanently elevated after zone device
folios are freed.
Add the missing mod_mthp_stat() decrement to free_zone_device_folio() so
that the counter is properly balanced.
Link: https://lore.kernel.org/20260717064502.1980173-1-npache@redhat.com
Link: https://lore.kernel.org/20260717064502.1980173-2-npache@redhat.com
Fixes: 5d65c8d758 ("mm: count the number of anonymous THPs per size")
Co-developed-by: David Hildenbrand <david@kernel.org>
Signed-off-by: David Hildenbrand <david@kernel.org>
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mem_cgroup_oom() passes an uninitialized "locked" to memcg1_oom_prepare()
and reads it back in memcg1_oom_finish():
bool locked, ret;
...
if (!memcg1_oom_prepare(memcg, &locked))
return false;
ret = mem_cgroup_out_of_memory(memcg, mask, order);
memcg1_oom_finish(memcg, locked);
This relies on memcg1_oom_prepare() setting *locked whenever it returns
true. The CONFIG_MEMCG_V1=y version does, but the stub used when
CONFIG_MEMCG_V1=n returns true without touching *locked, so
memcg1_oom_finish() consumes an uninitialized value. On a memcg OOM this
is reported by UBSAN:
UBSAN: invalid-load in mm/memcontrol.c:1932:27
load of value 0 is not a valid value for type 'bool' (aka '_Bool')
Initialize *locked to false in the stub; with cgroup v1 compiled out there
is no OOM lock to take.
Link: https://lore.kernel.org/20260716-memcg-oom-uninit-locked-v2-1-63631d878eb4@debian.org
Fixes: e93d4166b4 ("mm: memcg: put cgroup v1-specific code under a config option")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- hci_sync: Fix advertising data UAFs
- hci_conn: hold conn reference fixes
- L2CAP: fix UAF in l2cap_le_connect_rsp
- RFCOMM: validate skb length in rfcomm_recv_frame
- ISO: Locking fixes
- SCO: give the socket its own sco_conn reference
- MGMT: fix UAF in pair command cancellation
- MGMT: fix pending command UAF in EIR updates
- HIDP: reject frames without a transaction header
- HIDP: validate numbered report payloads
- btmtk: Fix short read errors in btmtk_usb_uhw_reg_read()
- btmtk: Fix short read errors in btmtk_usb_reg_read()
- btusb: Fix short read errors in btusb_qca_send_vendor_req()
- btintel: Validate length before parsing diagnostics TLV
-----BEGIN PGP SIGNATURE-----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=3LzD
-----END PGP SIGNATURE-----
Merge tag 'for-net-2026-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: Fix advertising data UAFs
- hci_conn: hold conn reference fixes
- L2CAP: fix UAF in l2cap_le_connect_rsp
- RFCOMM: validate skb length in rfcomm_recv_frame
- ISO: Locking fixes
- SCO: give the socket its own sco_conn reference
- MGMT: fix UAF in pair command cancellation
- MGMT: fix pending command UAF in EIR updates
- HIDP: reject frames without a transaction header
- HIDP: validate numbered report payloads
- btmtk: Fix short read errors in btmtk_usb_uhw_reg_read()
- btmtk: Fix short read errors in btmtk_usb_reg_read()
- btusb: Fix short read errors in btusb_qca_send_vendor_req()
- btintel: Validate length before parsing diagnostics TLV
* tag 'for-net-2026-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: (31 commits)
Bluetooth: SCO: give the socket its own sco_conn reference
Bluetooth: btusb: Fix short read errors in btusb_qca_send_vendor_req()
Bluetooth: btmtk: Fix short read errors in btmtk_usb_reg_read()
Bluetooth: btmtk: Fix short read errors in btmtk_usb_uhw_reg_read()
Bluetooth: hci_sync: remove unnecessary hci_conn_get in create_conn_sync
Bluetooth: hci_sync: fix hci_conn_del() use in hci_le_create_conn_sync
Bluetooth: hci_sync: hold conn in hci_past_sync() callback
Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback
Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback
Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks
Bluetooth: hci_conn: hold conn reference in abort_conn_sync()
Bluetooth: btintel: Validate length before parsing diagnostics TLV
Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero
Bluetooth: ISO: fix refcounting of iso_conn
Bluetooth: ISO: ensure no dangling hcon references in iso_conn
Bluetooth: ISO: avoid deadlocks in iso_sock_timeout
Bluetooth: ISO: fix leaking sk after socket release
Bluetooth: ISO: hold sk properly in iso_conn_ready
Bluetooth: ISO: validate sockaddr_iso first in iso_sock_rebind_bis()
Bluetooth: ISO: fix timeout vs sync_timeout typo in check_bcast_qos
...
====================
Link: https://patch.msgid.link/20260728201527.2456032-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same as the rest of the code, get_ss_info_from_atombios() uses
calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is
initialized only later in calc_pll_max_vco_construct(). Therefore, any
output using DC_LOG_SYNC() leads to a NULL pointer deference in
get_ss_info_from_atombios().
According to Sashiko, the very same problem exists in
dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too.
To avoid accessing the NULL context, use clk_src->base.ctx->logger
everywhere. That context in base is initialized earlier in
dce110_clk_src_construct() and dce112_clk_src_construct(). Before
get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions
above are actually called. This is done by redefining DC_LOGGER to
CTX->logger.
Before:
dce110_clk_src_construct() did:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM
-> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx
After:
dce110_clk_src_construct() does:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses clk_src->base.ctx
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1271175
Closes: https://lore.kernel.org/all/a9ee54e6-2413-4156-9bde-d528ae3c63a3@kernel.org/
Fixes: 1296423bf2 ("drm/amd/display: define DC_LOGGER for logger")
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Lakha, Bhawanpreet <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6f16fcbb0c)
Cc: stable@vger.kernel.org
On APUs, the GTT pool is backed by system RAM, but its size is not bound
to the non-carveout memory that actually backs it. A user can end up
with GTT + VRAM exceeding total physical memory through the following
sequence:
- Have a large non-carveout memory space (~128GB) and accordingly set a
large GTT (~100GB) via the ttm module parameter.
- Lower the non-carveout memory space in BIOS by increasing the UMA
Frame Buffer Size (VRAM) to 64GB.
- The previously set GTT value (~100GB) persists, even though the new
non-carveout space (64GB) can no longer back it.
This leads to a case where kernel reports GTT (100GB) + VRAM (64GB)
despite the sum being greater than total physical memory (128GB).
Cap the GTT size to totalram_pages() on APUs. totalram_pages() already
excludes the VRAM carveout, so the resulting GTT can never exceed the
system RAM that actually backs it.
Signed-off-by: Harkirat Gill <harkirat.gill@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Assisted-by: Claude:claude-opus-4
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5dafdd6492)
Cc: stable@vger.kernel.org
GPU average and input power backends report a mix of whole watts,
milliwatts, Q24.8 watts and decimal-packed fractions. Q24.8 is inherited
from the legacy PowerPlay sensor format. Milliwatts are a more natural unit
for the hwmon and pm_info consumers in amdgpu_pm.c. A common decoder cannot
distinguish these formats, and converting native milliwatts through Q24.8
also loses precision.
Use milliwatts as the internal unit across all PPT and PowerPlay backends.
Decode Q24.8 only at the legacy smu7 input boundary and encode it only for
the raw amdgpu_sensors debugfs interface. This gives hwmon, pm_info and the
sensor ioctl one unambiguous unit while preserving the format used by UMR.
Fixes: 5b79d0482f ("drm/amd/pp: Remove struct pp_gpu_power")
Fixes: 01992b121f ("drm/amd/pm: fix amdgpu_pm_info power display units")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reported-by: Lars Nieradzik <l.nieradzik@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 757ba0790b)
Cc: stable@vger.kernel.org
Runtime suspend runs GFX hw_fini and clears perfmon clock gating while
the UMD profile DPM level remains set in software. Re-apply stable
pstate after a successful runtime resume when a profile mode is active.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 138531c885)
Cc: stable@vger.kernel.org
Commit a4f01bf729 ("drm/amd/display: Refactor and fix link_dpms I2C")
had also changed the "Set retimer failed" messages from DC_LOG_DEBUG()
to DC_LOG_ERROR(). This unfortunately can create log spam.
Change those back to DC_LOG_DEBUG() only.
Fixes: a4f01bf729 ("drm/amd/display: Refactor and fix link_dpms I2C")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5520
Signed-off-by: Alan Swanson <reiver@improbability.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da8609eef1)
Cc: stable@vger.kernel.org
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
Fixes: 40e8a766a7 ("drm/amdkfd: CRIU checkpoint and restore events")
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ff57e223ab)
Cc: stable@vger.kernel.org
Verify that the phantom plane was allocated to avoid a later
segfault.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4970
Fixes: 70839da636 ("drm/amd/display: Add new DCN401 sources")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5adb54abe5)
Cc: stable@vger.kernel.org
If a plane reaches calculate_mcache_setting with a zero-area viewport,
calculate_mcache_setting exits early with num_mcaches == 0 and
mvmpg_width/height == 0. This will cause a divide-by-zero panic and can
also cause an underflow on num_mcaches.
Fix this by changing calculate_mcache_setting to bool and adding guards
after each calculate_mcache_row_bytes call. If num_mcaches or
mvmpg_width/height is zero, return a false. Callers will propagate the
failure as a rejected mode, which prevents the panic.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5302
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29c0f7c655)
Cc: stable@vger.kernel.org
Port the three-frame wait logic from dcn30_set_avmute to
dce110_set_avmute so that older DCN versions (1.0, 2.0) also
wait for GCP packets to be sent out before proceeding.
This ensures HDMI sinks properly process the mute state,
preventing garbled display after link re-establishment.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5167
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 414da24137)
Cc: stable@vger.kernel.org
amdgpu_dpm_get_gpu_metrics() returns a pointer to the shared metrics cache
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
Another reader can refresh the cache in place during the copy and return a
snapshot containing data from two generations.
Pass caller-provided storage through the DPM interface and copy the metrics
while the mutex is held. This keeps the cache pointer private and makes each
sysfs read observe one complete sample.
Fixes: 25c933b1c4 ("drm/amd/powerplay: add new sysfs interface for retrieving gpu metrics(V2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 862333bb48)
Cc: stable@vger.kernel.org
amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.
Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.
Fixes: 1684d3ba48 ("drm/amd/amdgpu: change pptable output format from ASCII to binary")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6eed7acfd)
Cc: stable@vger.kernel.org
Set the default reset method to mode2 for SMU 15.0.5.
Signed-off-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 314d49abe3)
eop_ring_buffer_size in struct queue_properties is a u32. In
kfd_queue_acquire_buffers() the expected EOP buffer size is computed as
ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the
addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to
0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on
size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD
cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB
BO, so CP EOP writes can land past the buffer and fault the GPU.
Cast the operand to u64 so the alignment is computed in 64-bit; the size
check in kfd_queue_buffer_get() then rejects the oversized request.
Fixes: 42ea9cf2f1 ("drm/amdkfd: Relax size checking during queue buffer get")
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ae443117b7)
Cc: stable@vger.kernel.org
Add PSP 15.0.5 related offsets for GFX to KMD interface
and enable support for it.
Co-developed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Shubhankar Milind Sardeshpande <Shubhankar.MilindSardeshpande@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b01e244c82)
Prevent unauthorized termination of active GPU debug sessions.
Previously, users with /dev/kfd access could terminate another process's
debug session without proper ownership or ptrace authorization.
Signed-off-by: Gang Ba <Gang.Ba@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4db4c5ffd5)
Cc: stable@vger.kernel.org
The commit referenced below restarts the CS if the validation is
still in progress. When debug_vm is enabled, all BOs from the CS
are invalidated so we will hit an infinite loop.
To avoid that, defer BO invalidation to amdgpu_cs_parser_fini.
Fixes: 59720bfd8c ("drm/amdgpu: restart the CS if some parts of the VM are still invalidated")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8c990ee9da)
Cc: stable@vger.kernel.org
Update smu v15.0.0 driver if header to be v15.0.5 compatible.
Signed-off-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ee6561f8a)
In kfd_criu_restore_event, there was no handling for
the event priv data having an invalid event type. The priv
data here is untrusted and can be invalid.
In that case, fail with EINVAL.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2e8e9963cd)
Cc: stable@vger.kernel.org
Updates PPSMC_MSGs and set/get functions for gathering GFXOFF logs
on Van Gogh. Logs are now gathered live rather than starting then
stopping logging and reading an average value afterwards. This is
in accordance to changes made in PMFW.
In regards to messageID 0x52, the old interface uses a start/stop
parameter, and the new one doesn't. The firmware is checked to
determine which method to use.
v2: added firmware guard to new interface, old interface kept as
fallback
Signed-off-by: Fares Soliman <Fares.Soliman@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 482e2cadea)
Building for ARCH=um with W=1 C=1 makes the "amd_sriov_msg_vf2pf_info
must be 1 KB" static assertion in amdgv_sriovmsg.h fail under sparse,
exposed after UML builds were enabled.
Sparse does not honor #pragma pack(push, 1) for the nested ucode_info
struct, so it sizes each element as 8 bytes instead of 5 and computes
the surrounding structure as larger than 1 KB. The compilers get this
right via the enclosing pragma, but the annotation should be explicit.
Fixes: af3f2f5db2 ("drm/amdgpu: Remove UML build exclusion from Kconfig")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607091659.SHEscT0c-lkp@intel.com/
Cc: Harry Wentland <harry.wentland@amd.com>
Assisted-by: Copilot:Claude-Opus-4.8
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1d8cfeb69d)
