info->var, a framebuffer's current mode, is expected to have a matching
entry in info->modelist. var_to_display() relies on this and treats a
failed fb_match_mode() as "This should not happen". fb_set_var() keeps it
true by adding the mode to the list on every change, and
do_register_framebuffer() does the same at registration.
store_modes() replaces the modelist from userspace. fb_new_modelist()
validates the new modes but does not check that info->var still has a
match. It relies on fbcon_new_modelist() to re-point consoles, but that
only handles consoles mapped to the framebuffer. With fbcon unbound there
are none, so info->var is left describing a mode that is no longer in the
list.
A later console takeover runs var_to_display(), where fb_match_mode()
returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it
to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode.
Keep the current mode in the list in fb_new_modelist(), the same way
fb_set_var() does.
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
fbcon_new_modelist() runs when a framebuffer's modelist changes. For each
console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and
passes the vc_num to fbcon_set_disp(). This assumes a console with a mode
set has a vc_data, but it can be NULL. fbcon_set_disp() sets
fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the
mode set after the vc_data is freed. fbcon_new_modelist() then dereferences
the NULL vc_data.
Keep fb_display[i].mode set only while the console has a vc_data. Check
vc_data before setting the mode in fbcon_set_disp(), and clear the mode in
fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips
such consoles.
Reported-by: syzbot+42525d636f430fd5d983@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=42525d636f430fd5d983
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
store_modes() replaces a framebuffer's modelist with modes from userspace.
On success it frees the old modelist with fb_destroy_modelist(). Two
fields still point into that freed list.
One pointer is fb_display[i].mode, the mode a console is using.
fbcon_new_modelist() moves these pointers to the new list. It only does so
for consoles still mapped to the framebuffer. An unmapped console is
skipped and keeps its stale pointer. Unbinding fbcon, for example, sets
con2fb_map[i] to -1 but leaves fb_display[i].mode set. An
FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches
fbcon_mode_deleted(). That function reads the stale fb_display[i].mode
through fb_mode_is_equal(). The read is a use-after-free.
The other pointer is fb_info->mode, the current mode. It is set through
the mode sysfs attribute. store_modes() does not update fb_info->mode, so
it is left pointing into the freed list. show_mode(), the attribute's read
handler, dereferences the stale fb_info->mode through mode_string(). The
read is a use-after-free.
Clear both pointers before freeing the list. Commit a1f3058930 ("fbcon:
Set fb_display[i]->mode to NULL when the mode is released") added the
helper fbcon_delete_modelist(). It clears every fb_display[i].mode that
points into a given list. So far it is called only from the unregister
path. Call it from store_modes() too, and set fb_info->mode to NULL.
Reported-by: syzbot+81c7c6b52649fd07299d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=81c7c6b52649fd07299d
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ajjoDhAi2y4ArSlz@dev/
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
viafb_dma_copy_out_sg() logs a VIA DMA timeout when the DONE bit is not
set after the completion wait and grace delay, but still returns success
to the caller.
Preserve the existing cleanup sequence and return -ETIMEDOUT when the DMA
engine did not report completion.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
goldfish_fb_pan_display() waits for the device to acknowledge the new
framebuffer base, but it only logs a timeout and still reports success.
The probe path also ignores the initial pan-display result before
registering the framebuffer.
Return -ETIMEDOUT when the base-update acknowledgment does not arrive,
and propagate that error from the initial probe-time base update before
the framebuffer is published.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
When fbcon_do_set_font() fails (e.g., due to a memory allocation failure
inside vc_resize() under heavy memory pressure), it jumps to the `err_out`
label to roll back the console state. However, the current rollback logic
forgets to restore the `hi_font` state, leading to a severe state machine
corruption.
Earlier in the function, `set_vc_hi_font()` might be called to change
`vc->vc_hi_font_mask` and mutate the screen buffer. If `vc_resize()`
subsequently fails, the `err_out` path restores `vc_font.charcount`
but entirely skips rolling back the `vc_hi_font_mask` and the screen
buffer.
This mismatch leaves the terminal in a desynchronized state. Because
`vc_hi_font_mask` remains set, the VT subsystem will still accept
character indices greater than 255 from userspace and write them to the
screen buffer. Subsequent rendering calls (e.g., `fbcon_putcs()`) will
then use these inflated indices to access the reverted, 256-character
font array, leading to a deterministic out-of-bounds read and potential
kernel memory disclosure.
Fix this by adding the missing rollback logic for the `hi_font` mask
and screen buffer in the error path.
Fixes: a5a923038d ("fbdev: fbcon: Properly revert changes when vc_resize() failed")
Cc: stable@vger.kernel.org
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Add arch_phys_wc_del() on error path to keep the
write-combining setup balanced when later probe
steps fail.
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The driver explicitly sets the .driver_data member of struct
platform_device_id to zero without relying on that value. Drop these
unused assignments.
While touching this array unify spacing and usage of commas and use
named initializers for .name.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
- New Support & Features
- Maxim MAX25014: Add support for the Maxim MAX25014 4-channel automotive grade
backlight driver IC
- Improvements & Fixes
- Maintainers: Add the Congatec Board Controller backlight driver to its corresponding
entry
- Congatec Board Controller: Remove redundant X86 dependency from the backlight driver
- Kinetic KTD2801: Enable BL_CORE_SUSPENDRESUME to ensure the chip is powered off
during suspend
- Cleanups & Refactoring
- Core: Use named initializers for i2c_device_id arrays to improve readability and
robustness
- Device Tree Binding Updates
- Maxim MAX25014: Add device tree bindings for the Maxim MAX25014 backlight controller
-----BEGIN PGP SIGNATURE-----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=6Es2
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Support & Features:
- Maxim MAX25014: Add support for the Maxim MAX25014 4-channel
automotive grade backlight driver IC
Improvements & Fixes:
- Maintainers: Add the Congatec Board Controller backlight driver to
its corresponding entry
- Congatec Board Controller: Remove redundant X86 dependency from the
backlight driver
- Kinetic KTD2801: Enable BL_CORE_SUSPENDRESUME to ensure the chip is
powered off during suspend
Cleanups & Refactoring:
- Core: Use named initializers for i2c_device_id arrays to improve
readability and robustness
Device Tree Binding Updates:
- Maxim MAX25014: Add device tree bindings for the Maxim MAX25014
backlight controller"
* tag 'backlight-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: Use named initializers for arrays of i2c_device_data
MAINTAINERS: Add cgbc backlight driver
backlight: cgbc: Remove redundant X86 dependency
backlight: Add max25014atg backlight
dt-bindings: backlight: Add max25014 support
backlight: ktd2801: Enable BL_CORE_SUSPENDRESUME
The 1920x1080@60 modedb entry has one too many initializers before
its sync field: a stray "0" occupies the sync slot, which shifts the
remaining values by one field. The entry therefore decodes as
sync = 0, vmode = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT (0x3,
i.e. FB_VMODE_INTERLACED | FB_VMODE_DOUBLE), and flag =
FB_VMODE_NONINTERLACED, instead of the intended sync = positive H/V,
vmode = non-interlaced.
fb_find_mode() then returns a 1920x1080 mode flagged as interlaced +
doublescan with active-low syncs. Drivers that honour var->vmode and
var->sync when programming display timing enable doublescan and the
wrong sync polarity, corrupting the output.
Drop the stray initializer so sync and vmode hold their intended
values (positive H/V sync, non-interlaced), matching the adjacent
1920x1200 entry.
Fixes: c8902258b2 ("fbdev: modedb: Add 1920x1080 at 60 Hz video mode")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260518111203.639603-2-u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
If mode_option is NULL, it is assigned from mode_option_buf:
if (!mode_option) {
fb_get_options(NULL, &mode_option_buf);
mode_option = mode_option_buf;
}
Later, name is assigned from mode_option:
const char *name = mode_option;
However, mode_option_buf is freed before name is no longer used:
kfree(mode_option_buf);
while name is still accessed by:
if ((name_matches(db[i], name, namelen) ||
Since name aliases mode_option_buf, this may result in a
use-after-free.
Fix this by extending the lifetime of mode_option_buf until the end of the
function by using scope-based resource management for cleanup.
Signed-off-by: Tuo Li <islituo@gmail.com>
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Helge Deller <deller@gmx.de>
Replacing strcpy() with strscpy() ensures that overflow of the target
buffer cannot happen.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The code that gets the frame buffer mode from OF has 'use after free',
'buffer overrun' and memory leaks.
info->edid_data isn't free if the probe functions fail or if
pd->def_mode is set.
If both the CRT and PANEL are enabled info->edid_data is used after
being freed and is freed twice.
The string returned by of_get_property(np, "mode", &len) is just
written over either the static "640x480-16@60" or the module parameter
string without any regard for the length (which is most likely longer).
Use kstrump() for the OF mode and free everything before freeing 'info.
Fixes: 4295f9bf74 ("video, sm501: add OF binding to support SM501")
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
A comment in drivers/video/fbdev/core/fbcon.c incorrectly refers to
CONFIG_MISC_TILEBLITTING instead of CONFIG_FB_TILEBLITTING. Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Use the result of strscpy() for the overflow check.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
There are no callers of fbcon outside fbdev. Move the declarations
into the internal header.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Handle console remapping in fbcon in fb_switch_output(). Vga-switcheroo
invokes this functionality before switching physical outputs to a new
graphics device. Open-coding fbcon state in vga-switcheroo exposed fbdev
implementation details.
Vga-switcheroo is used for switching physical outputs among graphics
hardware. This functionality is only supported by DRM drivers. A later
update will further move fb_switch_output() into DRM's fbdev emulation;
thus fully decoupling vga-switcheroo from fbdev.
v3:
- remove Kconfig dependency related to fbcon (Geert)
v2:
- use '#if defined' (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Handle fbcon during blanking in fb_blank_from_user(). First blank the
hardware, then blank fbcon. Same for unblanking. Update all callers and
resolve the duplicated logic.
With the new helper, fbdev's sysfb code no longer maintains fbcon state
by itself.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Handle fbcon during display updates in fb_set_var_from_user(). Check
with fbcon if the mode change is possible, update hardware state and
finally update fbcon. Update all callers.
Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other
mode-changes callers in sysfs and driver code are missing fbcon-related
steps.
With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain
fbcon state themselves.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
omapfb_mmap() has a race condition with OMAPFB_SETUP_PLANE ioctl that
can lead to use-after-free:
The fb_mmap() entry point holds mm_lock but not lock (fb_info->lock),
while ioctl handlers like OMAPFB_SETUP_PLANE hold lock but not mm_lock.
This allows concurrent execution.
In omapfb_mmap():
1. rg = omapfb_get_mem_region(ofbi->region); // Get old region ref
2. start = omapfb_get_region_paddr(ofbi); // Read from NEW region
3. len = fix->smem_len; // Read from NEW region
4. vm_iomap_memory(vma, start, len); // Map NEW region memory
5. atomic_inc(&rg->map_count); // Increment OLD region!
Concurrently, OMAPFB_SETUP_PLANE can:
- Reassign ofbi->region = new_rg
- Update fix->smem_len
- OMAPFB_SETUP_MEM then checks NEW region's map_count (0!) and frees it
This leaves userspace with a mapping to freed physical memory.
The fix is to read all required values (start, len) from the same
region reference (rg) that will have its map_count incremented,
preventing the region from being freed while still mapped.
Cc: stable@vger.kernel.org
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
pxa168fb maps the LCD controller register resource with devm_ioremap(),
which does not request the memory region. Use devm_ioremap_resource()
instead so the MMIO range is claimed before being mapped.
This also handles cleanup automatically.
Signed-off-by: AlbertoArostegui <aarosteguig@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The comment does not match the actual address offset. According
to the GRLIB IP Library Reference Manual (p. 2119), the CLUT register
is at offset 0x28, not the value stated in the comment.
Signed-off-by: Eduardo Silva <eduardo4silva@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Replace all printk() calls with appropriate device-aware logging
functions to properly associate log messages with the PCI device.
- Use pci_err() for errors where struct pci_dev is available
- Use pci_info() for info messages where struct pci_dev is available
Remove redundant 's3d:' prefix and pci_name() calls as device-aware
functions include device identification automatically.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Rahman Mahmutović <mahmutovicrahman5@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Don't need to do suspend/resume for fbcon in graphic mode.
Doing this may cause error, eg:
At the beginning, starting the Xorg with single screen and then an
external screen was plugged in. After logging out in Xorg, fbdev
info may using screen which is connected later on for info always
using first connected connector in list in func 'drm_setup_crtcs_fb'.
Then, S3 executed, fbcon found that the information did not match
and do atomic to switch fb. However, Xorg will not re-bind the crtc
fb but continues doing ioctl. At this time, the fb is incorrect.
With some modifications by Helge Deller.
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
The chipsfb driver is missing the MODULE_DESCRIPTION macro which
is required for all kernel modules.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Rahman Mahmutović <mahmutovicrahman5@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The big_swap(p) macro was intended to swap bytes within 16-bit halves
of a 32-bit value. However, because the bitwise shift operators (<<, >>)
have higher precedence than the bitwise AND operator (&), the original
code failed to perform any shifting on the masked bits.
For example, 'p & 0xff00ff00 >> 8' was evaluated as 'p &
(0xff00ff00 >> 8)', effectively neutralizing the intended swap.
Fix this by adding parentheses to ensure the bitwise AND is performed
before the shift, correctly implementing the byte swap logic.
Fixes: 1461d66728 ("staging: sm7xxfb: merge sm712fb with fbdev")
Cc: stable@vger.kernel.org
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Since commit 73ce73c30b ("fbdev: Transfer video= option strings to
caller; clarify ownership") the string returned from fb_get_options()
is expected to be freed by the caller. But the string is not freed in
vesafb_probe(). Fix that by freeing the option string after setup.
Fixes: 73ce73c30b ("fbdev: Transfer video= option strings to caller; clarify ownership")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Since commit 73ce73c30b ("fbdev: Transfer video= option strings to
caller; clarify ownership") the string returned from fb_get_options()
is expected to be freed by the caller, but the string is not freed in
efifb_probe(). Fix that by freeing the option string after setup.
Fixes: 73ce73c30b ("fbdev: Transfer video= option strings to caller; clarify ownership")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Due to an incorrect goto label, memory allocated for modedb and modelist
in uvesafb_vbe_init() is not freed in some error paths. Fix this by
updating the goto label.
Fixes: 8bdb3a2d7d ("uvesafb: the driver core")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Helge Deller <deller@gmx.de>
In trident_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist().
Fixes: 6a5e3bd0c8 ("tridentfb: Add DDC support")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Helge Deller <deller@gmx.de>
In tdfxfb_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() when CONFIG_FB_3DFX_I2C is defined, is not
freed in the subsequent error paths.
Fix that by calling fb_destroy_modelist().
Fixes: 215059d242 ("tdfxfb: make use of DDC information about connected monitor")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Helge Deller <deller@gmx.de>
In s3_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist()
Fixes: 86c0f043a7 ("s3fb: add DDC support")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Helge Deller <deller@gmx.de>
In nvidiafb_probe(), the memory allocated for modelist in
nvidia_set_fbinfo() is not freed in the subsequent error paths.
Fix that by calling fb_destroy_modelist().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Helge Deller <deller@gmx.de>
In i740fb_probe(), the memory allocated in fb_videomode_to_modelist()
for modelist is not freed in the error paths. Fix that by calling
fb_destroy_modelist().
Fixes: 5350c65f4f ("Resurrect Intel740 driver: i740fb")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Helge Deller <deller@gmx.de>
The memory allocated for modelist in fb_videomode_to_modelist() is not
freed in the subsequent error path.
Fix that by calling fb_destroy_modelist()
Fixes: 2ece5f43b0 ("fbdev: add the carmine FB driver")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Helge Deller <deller@gmx.de>
The function radeonfb_pci_register() allocates memory for modelist
(by calling radeon_check_modes() which calls fb_add_videomode()).
The memory is appended to info->modelist, but is not freed in subsequent
error paths. Fix this by calling fb_destroy_modelist().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Helge Deller <deller@gmx.de>
The memory allocated for pagerefs in fb_deferred_io_init() is not freed
on the error path. Fix it by calling fb_deferred_io_cleanup().
Fixes: 56c134f7f1 ("fbdev: Track deferred-I/O pages in pageref struct")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The memory allocated for pagerefs in fb_deferred_io_init() is not freed
on the error path. Fix it by calling fb_deferred_io_cleanup().
Fixes: 56c134f7f1 ("fbdev: Track deferred-I/O pages in pageref struct")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The memory allocated for pagerefs in fb_deferred_io_init() is not freed
on the error path. Fix it by calling fb_deferred_io_cleanup().
Fixes: 56c134f7f1 ("fbdev: Track deferred-I/O pages in pageref struct")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Use of_device_get_match_data() to retrieve the driver match data instead
of open-coding the OF match lookup and dereferencing match->data.
This also removes the deprecated of_device.h include from the driver.
No need for NULL check as every compatible has a corresponding data
component.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Use of_device_get_match_data() to fetch the platform ID entry directly
instead of open-coding an of_match_device() lookup. No NULL check is
needed as every compatible string has a corresponding data section.
This also lets the driver drop the of_device.h include.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The return value of vc_resize() is int, but fbcon_set_disp() stores it
in an unsigned long variable. While the !ret check happens to work
correctly by coincidence (negative values become large positive values),
the types should match. Use int instead.
Eliminates the following W=3 warning:
drivers/video/fbdev/core/fbcon.c: In function 'fbcon_set_disp':
drivers/video/fbdev/core/fbcon.c:1494:14: warning: implicit conversion from 'int' to 'unsigned long' [-Wconversion]
Fixes: af0db3c1f8 ("fbdev: Fix vmalloc out-of-bounds write in fast_imageblit")
Cc: stable@vger.kernel.org # v6.17+
Signed-off-by: Jiacheng Yu <yujiacheng3@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
... and PCI device helpers.
The various struct pci_device_id arrays were initialized mostly by list
expressions. This isn't easily readable if you're not into PCI. Using
named initializers is more explicit and thus easier to parse. Also use
PCI_DEVICE* helper macros to assign .vendor, .device, .subvendor and
.subdevice where appropriate and skip explicit assignments of 0 (which
the compiler takes care of).
The secret plan is to make struct pci_device_id::driver_data an
anonymous union (similar to
https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/)
and that requires named initializers. But it's also a nice cleanup on
its own.
While touching all these arrays, unify usage of whitespace and comma
in a few drivers.
This change doesn't introduce changes to the compiled pci_device_id
array. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The mdacon driver supports using ISA MDA or Hercules-compatible display
adapters as a secondary text console. This was commonly used in the
1990s and earlier for debugging software which took over the primary
display. It is highly unlikely anyone is doing so nowadays because
serial consoles and much better methods of debugging exist.
The driver is not enabled by any defconfig, nor any of the
dozens of distro configs collected at [1]. It has been relegated to VTs
13-16 since commit 0b9cf3aa6b ("mdacon messing up default vc's - set
default to vc13-16 again") in Linux 2.6.27 (and before Linux 2.5.53 -
see the link in the message of the above commit). The change in 2.6.27
was done because it was incorrectly detecting non-MDA adapters as MDA
and taking over all VTs, rendering them unusable.
Furthermore, vgacon supports using MDA/Hercules-compatible adapters as
the primary text console, so any systems with only one of these
adapters were already using vgacon and will not experience any loss in
functionality from the removal of this driver.
Given all of these factors, the mdacon driver is likely entirely
unused. Remove it.
[1] f0bee86a13
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
