Pointer v9ses is being assigned the value from the return of inlined
function v9fs_inode2v9ses (which just returns inode->i_sb->s_fs_info).
The pointer is not used after the assignment, so the variable is
redundant and can be removed.
Cleans up clang scan warnings such as:
fs/9p/vfs_inode_dotl.c:300:28: warning: variable 'v9ses' set but not
used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
The incorrect logical order of accessing the st object code in v9fs_fid_iget_dotl
is causing this uaf.
Fixes: 724a08450f ("fs/9p: simplify iget to remove unnecessary paths")
Reported-and-tested-by: syzbot+7a3d75905ea1a830dbe5@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Tested-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
According to the hardware design, the i2c address of audio codec es8316
on Cool Pi CM5 is 0x10.
This fix the read/write error like bellow:
es8316 7-0011: ASoC: error at soc_component_write_no_lock on es8316.7-0011 for register: [0x0000000c] -6
es8316 7-0011: ASoC: error at soc_component_write_no_lock on es8316.7-0011 for register: [0x00000003] -6
es8316 7-0011: ASoC: error at soc_component_read_no_lock on es8316.7-0011 for register: [0x00000016] -6
es8316 7-0011: ASoC: error at soc_component_read_no_lock on es8316.7-0011 for register: [0x00000016] -6
Fixes: 791c154c39 ("arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB")
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20240324112833.2181961-1-andyshrk@163.com
[also adapted the node name to audio-codec@10]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The PCIe PHY requires two regulators and are present on the SoM
directly, while the PCIe connector also exposes 3V3 and 12V power rails
which are available on the baseboard.
Considering that 3/4 regulators are always-on on HW level and that the
last one depends on a regulator from the PMIC that is specified as
always on, this commit should be purely cosmetic and no change in
behavior is expected.
Let's add all regulators for PCIe on RK3399 Puma Haikou.
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240308-puma-diode-pu-v2-3-309f83da110a@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The PCIE_WAKE# has a diode used as a level-shifter, and is used as an
input pin. While the SoC default is to enable the pull-up, the core
rk3399 pinconf for this pin opted for pull-none. So as to not disturb
the behaviour of other boards which may rely on pull-none instead of
pull-up, set the needed pull-up only for RK3399 Puma.
Fixes: 60fd9f72ce ("arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240308-puma-diode-pu-v2-2-309f83da110a@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Q7_USB_ID has a diode used as a level-shifter, and is used as an
input pin. The SoC default for this pin is a pull-up, which is correct
but the pinconf in the introducing commit missed that, so let's fix this
oversight.
Fixes: ed2c66a95c ("arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG mode")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240308-puma-diode-pu-v2-1-309f83da110a@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Nodes overridden by their reference should be ordered alphabetically to
make it easier to read the DTS. pinctrl node is defined in the wrong
location so let's reorder it.
Signed-off-by: Iskander Amara <iskander.amara@theobroma-systems.com>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240308085243.69903-2-iskander.amara@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Q7_THRM# pin is connected to a diode on the module which is used
as a level shifter, and the pin have a pull-down enabled by
default. We need to configure it to internal pull-up, other-
wise whenever the pin is configured as INPUT and we try to
control it externally the value will always remain zero.
Signed-off-by: Iskander Amara <iskander.amara@theobroma-systems.com>
Fixes: 2c66fc34e9 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240308085243.69903-1-iskander.amara@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The MT7531 switch listens on PHY address 0x1f on an MDIO bus. I've got two
findings that support this. There's no bootstrapping option to change the
PHY address of the switch. The Linux driver hardcodes 0x1f as the PHY
address of the switch. So the reg property on the device tree is currently
ignored by the Linux driver.
Therefore, describe the correct PHY address on Banana Pi BPI-R2 Pro that
has this switch.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Fixes: c1804463e5 ("arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board")
Link: https://lore.kernel.org/r/20240314-for-rockchip-mt7531-phy-address-v1-1-743b5873358f@arinc9.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Fix logic that is supposed to prevent placement of the kernel image
below LOAD_PHYSICAL_ADDR
- Use the firmware stack in the EFI stub when running in mixed mode
- Clear BSS only once when using mixed mode
- Check efi.get_variable() function pointer for NULL before trying to
call it
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZgCRgwAKCRAwbglWLn0t
XHozAP9jLdeGs1ReYZAn+W0QtW/SJHJznoPiHcktdNKG4rNX3QD9G3URu0f4jKCG
yvjw8qHM1pC2cihXXjABjf7gL7g6LAE=
=cNP7
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Fix logic that is supposed to prevent placement of the kernel image
below LOAD_PHYSICAL_ADDR
- Use the firmware stack in the EFI stub when running in mixed mode
- Clear BSS only once when using mixed mode
- Check efi.get_variable() function pointer for NULL before trying to
call it
* tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: fix panic in kdump kernel
x86/efistub: Don't clear BSS twice in mixed mode
x86/efistub: Call mixed mode boot services on the firmware's stack
efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address
- Ensure that the encryption mask at boot is properly propagated on
5-level page tables, otherwise the PGD entry is incorrectly set to
non-encrypted, which causes system crashes during boot.
- Undo the deferred 5-level page table setup as it cannot work with
memory encryption enabled.
- Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
to the default value but the cached variable is not, so subsequent
comparisons might yield the wrong result and as a consequence the
result prevents updating the MSR.
- Register the local APIC address only once in the MPPARSE enumeration to
prevent triggering the related WARN_ONs() in the APIC and topology code.
- Handle the case where no APIC is found gracefully by registering a fake
APIC in the topology code. That makes all related topology functions
work correctly and does not affect the actual APIC driver code at all.
- Don't evaluate logical IDs during early boot as the local APIC IDs are
not yet enumerated and the invoked function returns an error
code. Nothing requires the logical IDs before the final CPUID
enumeration takes place, which happens after the enumeration.
- Cure the fallout of the per CPU rework on UP which misplaced the
copying of boot_cpu_data to per CPU data so that the final update to
boot_cpu_data got lost which caused inconsistent state and boot
crashes.
- Use copy_from_kernel_nofault() in the kprobes setup as there is no
guarantee that the address can be safely accessed.
- Reorder struct members in struct saved_context to work around another
kmemleak false positive
- Remove the buggy code which tries to update the E820 kexec table for
setup_data as that is never passed to the kexec kernel.
- Update the resource control documentation to use the proper units.
- Fix a Kconfig warning observed with tinyconfig
-----BEGIN PGP SIGNATURE-----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=WyQ2
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Ensure that the encryption mask at boot is properly propagated on
5-level page tables, otherwise the PGD entry is incorrectly set to
non-encrypted, which causes system crashes during boot.
- Undo the deferred 5-level page table setup as it cannot work with
memory encryption enabled.
- Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
to the default value but the cached variable is not, so subsequent
comparisons might yield the wrong result and as a consequence the
result prevents updating the MSR.
- Register the local APIC address only once in the MPPARSE enumeration
to prevent triggering the related WARN_ONs() in the APIC and topology
code.
- Handle the case where no APIC is found gracefully by registering a
fake APIC in the topology code. That makes all related topology
functions work correctly and does not affect the actual APIC driver
code at all.
- Don't evaluate logical IDs during early boot as the local APIC IDs
are not yet enumerated and the invoked function returns an error
code. Nothing requires the logical IDs before the final CPUID
enumeration takes place, which happens after the enumeration.
- Cure the fallout of the per CPU rework on UP which misplaced the
copying of boot_cpu_data to per CPU data so that the final update to
boot_cpu_data got lost which caused inconsistent state and boot
crashes.
- Use copy_from_kernel_nofault() in the kprobes setup as there is no
guarantee that the address can be safely accessed.
- Reorder struct members in struct saved_context to work around another
kmemleak false positive
- Remove the buggy code which tries to update the E820 kexec table for
setup_data as that is never passed to the kexec kernel.
- Update the resource control documentation to use the proper units.
- Fix a Kconfig warning observed with tinyconfig
* tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Move 5-level paging global variable assignments back
x86/boot/64: Apply encryption mask to 5-level pagetable update
x86/cpu: Add model number for another Intel Arrow Lake mobile processor
x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD
Documentation/x86: Document that resctrl bandwidth control units are MiB
x86/mpparse: Register APIC address only once
x86/topology: Handle the !APIC case gracefully
x86/topology: Don't evaluate logical IDs during early boot
x86/cpu: Ensure that CPU info updates are propagated on UP
kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address
x86/pm: Work around false positive kmemleak report in msr_build_context()
x86/kexec: Do not update E820 kexec table for setup_data
x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'
clarify that any value which is less than the tick slice has no effect
because the scheduler tick is not guaranteed to happen within the set time
slice.
-----BEGIN PGP SIGNATURE-----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=K76J
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler doc clarification from Thomas Gleixner:
"A single update for the documentation of the base_slice_ns tunable to
clarify that any value which is less than the tick slice has no effect
because the scheduler tick is not guaranteed to happen within the set
time slice"
* tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/doc: Update documentation for base_slice_ns and CONFIG_HZ relation
This has a set of swiotlb alignment fixes for sometimes very long
standing bugs from Will. We've been discussion them for a while and they
should be solid now.
-----BEGIN PGP SIGNATURE-----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=Xaob
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"This has a set of swiotlb alignment fixes for sometimes very long
standing bugs from Will. We've been discussion them for a while and
they should be solid now"
* tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Reinstate page-alignment for mappings >= PAGE_SIZE
iommu/dma: Force swiotlb_max_mapping_size on an untrusted device
swiotlb: Fix alignment checks when both allocation and DMA masks are present
swiotlb: Honour dma_alloc_coherent() alignment in swiotlb_alloc()
swiotlb: Enforce page alignment in swiotlb_alloc()
swiotlb: Fix double-allocation of slots due to broken alignment handling
The "maxim,green-led-current-microamp" property is only available for
the max30105 part (it provides an extra green LED), and must be set to
false for the max30102 part.
Instead, the max30100 part has been used for that, which is not
supported by this binding (it has its own binding).
This error was introduced during the txt to yaml conversion.
Fixes: 5a6a65b11e ("dt-bindings:iio:health:maxim,max30102: txt to yaml conversion")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240316-max30102_binding_fix-v1-1-e8e58f69ef8a@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Bosch does not use unique BMPxxx_CHIP_ID for the different versions
of the device which leads to misidentification of devices if their
ID is used. Use a new value in the chip_info structure instead of
the BMPxxx_CHIP_ID, in order to choose the correct regmap_bus to
be used.
Fixes: a9dd9ba323 ("iio: pressure: Fixes BMP38x and BMP390 SPI support")
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://lore.kernel.org/r/20240316110743.1998400-3-vassilisamir@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use bme280_chip_info structure instead of bmp280_chip_info
in SPI support for the BME280 sensor.
Fixes: 0b0b772637 ("iio: pressure: bmp280: Use chip_info pointers for each chip as driver data")
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://lore.kernel.org/r/20240316110743.1998400-2-vassilisamir@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Check if get_next_variable() is actually valid pointer before
calling it. In kdump kernel this method is set to NULL that causes
panic during the kexec-ed kernel boot.
Tested with QEMU and OVMF firmware.
Fixes: bad267f9e1 ("efi: verify that variable services are supported")
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Clearing BSS should only be done once, at the very beginning.
efi_pe_entry() is the entrypoint from the firmware, which may not clear
BSS and so it is done explicitly. However, efi_pe_entry() is also used
as an entrypoint by the mixed mode startup code, in which case BSS will
already have been cleared, and doing it again at this point will corrupt
global variables holding the firmware's GDT/IDT and segment selectors.
So make the memset() conditional on whether the EFI stub is running in
native mode.
Fixes: b3810c5a2c ("x86/efistub: Clear decompressor BSS in native EFI entrypoint")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Normally, the EFI stub calls into the EFI boot services using the stack
that was live when the stub was entered. According to the UEFI spec,
this stack needs to be at least 128k in size - this might seem large but
all asynchronous processing and event handling in EFI runs from the same
stack and so quite a lot of space may be used in practice.
In mixed mode, the situation is a bit different: the bootloader calls
the 32-bit EFI stub entry point, which calls the decompressor's 32-bit
entry point, where the boot stack is set up, using a fixed allocation
of 16k. This stack is still in use when the EFI stub is started in
64-bit mode, and so all calls back into the EFI firmware will be using
the decompressor's limited boot stack.
Due to the placement of the boot stack right after the boot heap, any
stack overruns have gone unnoticed. However, commit
5c4feadb00 ("x86/decompressor: Move global symbol references to C code")
moved the definition of the boot heap into C code, and now the boot
stack is placed right at the base of BSS, where any overruns will
corrupt the end of the .data section.
While it would be possible to work around this by increasing the size of
the boot stack, doing so would affect all x86 systems, and mixed mode
systems are a tiny (and shrinking) fraction of the x86 installed base.
So instead, record the firmware stack pointer value when entering from
the 32-bit firmware, and switch to this stack every time a EFI boot
service call is made.
Cc: <stable@kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit 63bed96604 ("x86/startup_64: Defer assignment of 5-level paging
global variables") moved assignment of 5-level global variables to later
in the boot in order to avoid having to use RIP relative addressing in
order to set them. However, when running with 5-level paging and SME
active (mem_encrypt=on), the variables are needed as part of the page
table setup needed to encrypt the kernel (using pgd_none(), p4d_offset(),
etc.). Since the variables haven't been set, the page table manipulation
is done as if 4-level paging is active, causing the system to crash on
boot.
While only a subset of the assignments that were moved need to be set
early, move all of the assignments back into check_la57_support() so that
these assignments aren't spread between two locations. Instead of just
reverting the fix, this uses the new RIP_REL_REF() macro when assigning
the variables.
Fixes: 63bed96604 ("x86/startup_64: Defer assignment of 5-level paging global variables")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/2ca419f4d0de719926fd82353f6751f717590a86.1711122067.git.thomas.lendacky@amd.com
When running with 5-level page tables, the kernel mapping PGD entry is
updated to point to the P4D table. The assignment uses _PAGE_TABLE_NOENC,
which, when SME is active (mem_encrypt=on), results in a page table
entry without the encryption mask set, causing the system to crash on
boot.
Change the assignment to use _PAGE_TABLE instead of _PAGE_TABLE_NOENC so
that the encryption mask is set for the PGD entry.
Fixes: 533568e06b ("x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[]")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/8f20345cda7dbba2cf748b286e1bc00816fe649a.1711122067.git.thomas.lendacky@amd.com
Commit 672365477a ("x86/fpu: Update XFD state where required") and
commit 8bf26758ca ("x86/fpu: Add XFD state to fpstate") introduced a
per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in
order to avoid unnecessary writes to the MSR.
On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which
wipes out any stale state. But the per CPU cached xfd value is not
reset, which brings them out of sync.
As a consequence a subsequent xfd_update_state() might fail to update
the MSR which in turn can result in XRSTOR raising a #NM in kernel
space, which crashes the kernel.
To fix this, introduce xfd_set_state() to write xfd_state together
with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD.
Fixes: 672365477a ("x86/fpu: Update XFD state where required")
Signed-off-by: Adamos Ttofari <attofari@amazon.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240322230439.456571-1-chang.seok.bae@intel.com
Closes: https://lore.kernel.org/lkml/20230511152818.13839-1-attofari@amazon.de
The memory bandwidth software controller uses 2^20 units rather than
10^6. See mbm_bw_count() which computes bandwidth using the "SZ_1M"
Linux define for 0x00100000.
Update the documentation to use MiB when describing this feature.
It's too late to fix the mount option "mba_MBps" as that is now an
established user interface.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240322182016.196544-1-tony.luck@intel.com
1) Prevent endless timer requeuing which is caused by two CPUs racing out
of idle. This happens when the last CPU goes idle and therefore has to
ensure to expire the pending global timers and some other CPU come out
of idle at the same time and the other CPU wins the race and expires
the global queue. This causes the last CPU to chase ghost timers
forever and reprogramming it's clockevent device endlessly.
Cure this by re-evaluating the wakeup time unconditionally.
2) The split into local (pinned) and global timers in the timer wheel
caused a regression for NOHZ full as it broke the idle tracking of
global timers. On NOHZ full this prevents an self IPI being sent which
in turn causes the timer to be not programmed and not being expired on
time.
Restore the idle tracking for the global timer base so that the self
IPI condition for NOHZ full is working correctly again.
-----BEGIN PGP SIGNATURE-----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=lY5O
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two regression fixes for the timer and timer migration code:
- Prevent endless timer requeuing which is caused by two CPUs racing
out of idle. This happens when the last CPU goes idle and therefore
has to ensure to expire the pending global timers and some other
CPU come out of idle at the same time and the other CPU wins the
race and expires the global queue. This causes the last CPU to
chase ghost timers forever and reprogramming it's clockevent device
endlessly.
Cure this by re-evaluating the wakeup time unconditionally.
- The split into local (pinned) and global timers in the timer wheel
caused a regression for NOHZ full as it broke the idle tracking of
global timers. On NOHZ full this prevents an self IPI being sent
which in turn causes the timer to be not programmed and not being
expired on time.
Restore the idle tracking for the global timer base so that the
self IPI condition for NOHZ full is working correctly again"
* tag 'timers-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix removed self-IPI on global timer's enqueue in nohz_full
timers/migration: Fix endless timer requeue after idle interrupts
- A fix for the prescaler of the ARM global timer where the prescaler
mask define only covered 4 bits while it is actully 8 bits wide. This
restricted obviously the possible range of the prescaler adjustments.
- A fix for the RISC-V timer which prevents a timer interrupt being
raised while the timer is initialized.
- A set of device tree updates to support new system on chips in various
drivers.
- Kernel-doc and other cleanups all over the place.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmX/MDcTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYofUcD/9hZjJp11tNJNibLGjJrZUIg1Zpiu7c
avlrG/KT9BgElyp8D4WG3GTY7ng9vzJ7XNXG5eXyrkMClzlDYmXt5oeoUM3KRFDg
G/kX0ee/+vcP5IKVsYR3w1MQ7QGe7VfE5FU4CxtR3OjG3T5Gueim1AKBtM26QazK
wHe1/yp0vIPjZO1awlWQm9CJ+DSD2Mb1oPo8c9Bitd5KXXjPg8uR3bk2kOVYMdzC
B6xYvQWF3Pl7NXcQKOnIazqsNlphsYiBGc5ZbKp5zjDggmp/ChBedt6ePCccU3DO
VXE6D4eyZ5hmQbFzSEZUYsWcNzkeH8ZWnxkjeAoG60Y2vErLVsceytaIja061VOl
BP2j8QbQ7ztwLOTtZc8KwJsVfxBh1xhwAUwe5Mpl171m7K2n+zquR8Clq4SqL2DK
mjUcHKIZzyhZ4HX3rRwVOpJmfbJlRxSRjiLp+oPulJBB9pLMjarxwQ6Ij68yrPst
kVow4Ur45abmXsDRj3lc3+bDcfMr8AM3l/HjD7AZamC2TAvkp1hkYPghhazdolx5
qQA3swdQl0tq49SNvvLbVRjRiCiQmUdpOGpnevvqxEO/BESGquVfPrihOYqIQuwh
+yurmba5L8uxpsBCPtGfiMse9fbE7GVQJkMqhr9KNNOfER30rEe8bmqr6r71+uZJ
19Jp2U76zNfVXA==
=M9Gu
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more clocksource updates from Thomas Gleixner:
"A set of updates for clocksource and clockevent drivers:
- A fix for the prescaler of the ARM global timer where the prescaler
mask define only covered 4 bits while it is actully 8 bits wide.
This obviously restricted the possible range of prescaler
adjustments
- A fix for the RISC-V timer which prevents a timer interrupt being
raised while the timer is initialized
- A set of device tree updates to support new system on chips in
various drivers
- Kernel-doc and other cleanups all over the place"
* tag 'timers-core-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-riscv: Clear timer interrupt on timer initialization
dt-bindings: timer: Add support for cadence TTC PWM
clocksource/drivers/arm_global_timer: Simplify prescaler register access
clocksource/drivers/arm_global_timer: Guard against division by zero
clocksource/drivers/arm_global_timer: Make gt_target_rate unsigned long
dt-bindings: timer: add Ralink SoCs system tick counter
clocksource: arm_global_timer: fix non-kernel-doc comment
clocksource/drivers/arm_global_timer: Remove stray tab
clocksource/drivers/arm_global_timer: Fix maximum prescaler value
clocksource/drivers/imx-sysctr: Add i.MX95 support
clocksource/drivers/imx-sysctr: Drop use global variables
dt-bindings: timer: nxp,sysctr-timer: support i.MX95
dt-bindings: timer: renesas: ostm: Document RZ/Five SoC
dt-bindings: timer: renesas,tmu: Document input capture interrupt
clocksource/drivers/ti-32K: Fix misuse of "/**" comment
clocksource/drivers/stm32: Fix all kernel-doc warnings
dt-bindings: timer: exynos4210-mct: Add google,gs101-mct compatible
clocksource/drivers/imx: Fix -Wunused-but-set-variable warning
spurious and misrouted interrupts.
- Ensure that posted writes are flushed in the eoi() callback
- Ensure that interrupts are masked at the chip level when the trigger
type is changed
- Clear the interrupt status register when setting up edge type trigger
modes.
- Ensure that the trigger type and routing information is set before the
interrupt is enabled.
-----BEGIN PGP SIGNATURE-----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=zIKG
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A series of fixes for the Renesas RZG21 interrupt chip driver to
prevent spurious and misrouted interrupts.
- Ensure that posted writes are flushed in the eoi() callback
- Ensure that interrupts are masked at the chip level when the
trigger type is changed
- Clear the interrupt status register when setting up edge type
trigger modes
- Ensure that the trigger type and routing information is set before
the interrupt is enabled"
* tag 'irq-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time
irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type
irqchip/renesas-rzg2l: Rename rzg2l_irq_eoi()
irqchip/renesas-rzg2l: Rename rzg2l_tint_eoi()
irqchip/renesas-rzg2l: Flush posted write in irq_eoi()
THe trace_sys_enter() tracepoint can modify the syscall number via
kprobes or BPF in pt_regs, but that requires that the syscall number is
re-evaluted from pt_regs after the tracepoint.
A seccomp fix in that area removed the re-evaluation so the change does
not take effect as the code just uses the locally cached number.
Restore the original behaviour by re-evaluating the syscall number after
the tracepoint.
-----BEGIN PGP SIGNATURE-----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=iW0L
-----END PGP SIGNATURE-----
Merge tag 'core-entry-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry fix from Thomas Gleixner:
"A single fix for the generic entry code:
The trace_sys_enter() tracepoint can modify the syscall number via
kprobes or BPF in pt_regs, but that requires that the syscall number
is re-evaluted from pt_regs after the tracepoint.
A seccomp fix in that area removed the re-evaluation so the change
does not take effect as the code just uses the locally cached number.
Restore the original behaviour by re-evaluating the syscall number
after the tracepoint"
* tag 'core-entry-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Respect changes to system call number by trace_sys_enter()
- Handle errors in mark_rodata_ro() and mark_initmem_nx().
- Make struct crash_mem available without CONFIG_CRASH_DUMP.
Thanks to: Christophe Leroy, Hari Bathini.
-----BEGIN PGP SIGNATURE-----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=edty
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Handle errors in mark_rodata_ro() and mark_initmem_nx()
- Make struct crash_mem available without CONFIG_CRASH_DUMP
Thanks to Christophe Leroy and Hari Bathini.
* tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency
powerpc/kexec: split CONFIG_KEXEC_FILE and CONFIG_CRASH_DUMP
kexec/kdump: make struct crash_mem available without CONFIG_CRASH_DUMP
powerpc: Handle error in mark_rodata_ro() and mark_initmem_nx()
- remove a misuse of kernel-doc comment
- use "Call trace:" for backtraces like other architectures
- implement copy_from_kernel_nofault_allowed() to fix a LKDTM test
- add a "cut here" line for prefetch aborts
- remove unnecessary Kconfing entry for FRAME_POINTER
- remove iwmmxy support for PJ4/PJ4B cores
- use bitfield helpers in ptrace to improve readabililty
- check if folio is reserved before flushing
-----BEGIN PGP SIGNATURE-----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=f4r2
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- remove a misuse of kernel-doc comment
- use "Call trace:" for backtraces like other architectures
- implement copy_from_kernel_nofault_allowed() to fix a LKDTM test
- add a "cut here" line for prefetch aborts
- remove unnecessary Kconfing entry for FRAME_POINTER
- remove iwmmxy support for PJ4/PJ4B cores
- use bitfield helpers in ptrace to improve readabililty
- check if folio is reserved before flushing
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses
ARM: 9354/1: ptrace: Use bitfield helpers
ARM: 9352/1: iwmmxt: Remove support for PJ4/PJ4B cores
ARM: 9353/1: remove unneeded entry for CONFIG_FRAME_POINTER
ARM: 9351/1: fault: Add "cut here" line for prefetch aborts
ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()
ARM: 9349/1: unwind: Add missing "Call trace:" line
ARM: 9334/1: mm: init: remove misuse of kernel-doc comment
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
-----BEGIN PGP SIGNATURE-----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=1LW2
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more hardening updates from Kees Cook:
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
* tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/bugs: Improve warning message for compilers without counted_by support
overflow: Change DEFINE_FLEX to take __counted_by member
Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST"
arch/Kconfig: eliminate needless UTF-8 character in Kconfig help
ubsan: Disable signed integer overflow sanitizer on GCC < 8
The APIC address is registered twice. First during the early detection and
afterwards when actually scanning the table for APIC IDs. The APIC and
topology core warn about the second attempt.
Restrict it to the early detection call.
Fixes: 81287ad65d ("x86/apic: Sanitize APIC address setup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.297774848@linutronix.de
If there is no local APIC enumerated and registered then the topology
bitmaps are empty. Therefore, topology_init_possible_cpus() will die with
a division by zero exception.
Prevent this by registering a fake APIC id to populate the topology
bitmap. This also allows to use all topology query interfaces
unconditionally. It does not affect the actual APIC code because either
the local APIC address was not registered or no local APIC could be
detected.
Fixes: f1f758a805 ("x86/topology: Add a mechanism to track topology via APIC IDs")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.242709302@linutronix.de
The local APICs have not yet been enumerated so the logical ID evaluation
from the topology bitmaps does not work and would return an error code.
Skip the evaluation during the early boot CPUID evaluation and only apply
it on the final run.
Fixes: 380414be78 ("x86/cpu/topology: Use topology logical mapping mechanism")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.186943142@linutronix.de
The boot sequence evaluates CPUID information twice:
1) During early boot
2) When finalizing the early setup right before
mitigations are selected and alternatives are patched.
In both cases the evaluation is stored in boot_cpu_data, but on UP the
copying of boot_cpu_data to the per CPU info of the boot CPU happens
between #1 and #2. So any update which happens in #2 is never propagated to
the per CPU info instance.
Consolidate the whole logic and copy boot_cpu_data right before applying
alternatives as that's the point where boot_cpu_data is in it's final
state and not supposed to change anymore.
This also removes the voodoo mb() from smp_prepare_cpus_common() which
had absolutely no purpose.
Fixes: 71eb4893cf ("x86/percpu: Cure per CPU madness on UP")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.127642785@linutronix.de
The verifier allows using the addr_space_cast instruction in a program
that doesn't have an associated arena. This was caught in the form an
invalid memory access in do_misc_fixups() when while converting
addr_space_cast to a normal 32-bit mov, env->prog->aux->arena was
dereferenced to check for BPF_F_NO_USER_CONV flag.
Reject programs that include the addr_space_cast instruction but don't
have an associated arena.
root@rv-tester:~# ./reproducer
Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000000030
Oops [#1]
[<ffffffff8017eeaa>] do_misc_fixups+0x43c/0x1168
[<ffffffff801936d6>] bpf_check+0xda8/0x22b6
[<ffffffff80174b32>] bpf_prog_load+0x486/0x8dc
[<ffffffff80176566>] __sys_bpf+0xbd8/0x214e
[<ffffffff80177d14>] __riscv_sys_bpf+0x22/0x2a
[<ffffffff80d2493a>] do_trap_ecall_u+0x102/0x17c
[<ffffffff80d3048c>] ret_from_exception+0x0/0x64
Fixes: 6082b6c328 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/bpf/CABOYnLz09O1+2gGVJuCxd_24a-7UueXzV-Ff+Fr+h5EKFDiYCQ@mail.gmail.com/
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240322153518.11555-1-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier currently converts addr_space_cast from as(1) to as(0) that
is: BPF_ALU64 | BPF_MOV | BPF_X with off=1 and imm=1
to
BPF_ALU | BPF_MOV | BPF_X with imm=1 (32-bit mov)
Because of this imm=1, the JITs that have bpf_jit_needs_zext() == true,
interpret the converted instruction as BPF_ZEXT_REG(DST) which is a
special form of mov32, used for doing explicit zero extension on dst.
These JITs will just zero extend the dst reg and will not move the src to
dst before the zext.
Fix do_misc_fixups() to set imm=0 when converting addr_space_cast to a
normal mov32.
The JITs that have bpf_jit_needs_zext() == true rely on the verifier to
emit zext instructions. Mark dst_reg as subreg when doing cast from
as(1) to as(0) so the verifier emits a zext instruction after the mov.
Fixes: 6082b6c328 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240321153939.113996-1-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cited commit started returning an error when user space requests to dump
the interface's IPv6 addresses and IPv6 is disabled on the interface.
Restore the previous behavior and do not return an error.
Before cited commit:
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 1a:52:02:5a:c2:6e brd ff:ff:ff:ff:ff:ff
inet6 fe80::1852:2ff:fe5a:c26e/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 1000
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1000 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 1a:52:02:5a:c2:6e brd ff:ff:ff:ff:ff:ff
After cited commit:
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 1e:9b:94:00:ac:e8 brd ff:ff:ff:ff:ff:ff
inet6 fe80::1c9b:94ff:fe00:ace8/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 1000
# ip address show dev dummy1
RTNETLINK answers: No such device
Dump terminated
With this patch:
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 42:35:fc:53:66:cf brd ff:ff:ff:ff:ff:ff
inet6 fe80::4035:fcff:fe53:66cf/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 1000
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1000 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 42:35:fc:53:66:cf brd ff:ff:ff:ff:ff:ff
Fixes: 9cc4cc329d ("ipv6: use xa_array iterator to implement inet6_dump_addr()")
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/netdev/7e261328-42eb-411d-b1b4-ad884eeaae4d@linux.dev/
Tested-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240321173042.2151756-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "*hw_stats_used" value needs to be set on the success paths to prevent
an uninitialized variable bug in the caller, nla_put_nh_group_stats().
Fixes: 5072ae00ae ("net: nexthop: Expose nexthop group HW stats to user space")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/f08ac289-d57f-4a1a-830f-cf9a0563cb9c@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we set members of simple nested structures in requests
we need to set "presence" bits for all the nesting layers
below. This has nothing to do with the presence type of
the last layer.
Fixes: be5bea1cc0 ("net: add basic C code generators for Netlink")
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240321020214.1250202-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out logic for converting numa node to hv_proximity_domain_info
into a helper function.
Change hv_proximity_domain_info to a struct to improve readability.
While at it, rename hv_add_logical_processor_* structs to the correct
hv_input_/hv_output_ prefix, and remove the flags field which is not
present in the ABI.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1711141826-9458-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1711141826-9458-1-git-send-email-nunodasneves@linux.microsoft.com>
The current message for telling the user that their compiler does not
support the counted_by attribute in the FAM_BOUNDS test does not make
much sense either grammatically or semantically. Fix it to make it
correct in both aspects.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240321-lkdtm-improve-lack-of-counted_by-msg-v1-1-0fbf7481a29c@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The norm should be flexible array structures with __counted_by
annotations, so DEFINE_FLEX() is updated to expect that. Rename
the non-annotated version to DEFINE_RAW_FLEX(), and update the
few existing users. Additionally add selftests for the macros.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
The vfs has long had a write lifetime hint mechanism that gives the
expected longevity on storage of the data being written. f2fs was the
original consumer of this and used the hint for flash data placement
(mostly to avoid write amplification by placing objects with similar
lifetimes in the same erase block). More recently the SCSI based UFS
(Universal Flash Storage) drivers have wanted to take advantage of
this as well, for the same reasons as f2fs, necessitating plumbing the
write hints through the block layer and then adding it to the SCSI
core. The vfs write_hints pull you've already taken plumbs this as
far as block and this pull request completes the SCSI core enabling
based on a recently agreed reuse of the old write command group
number. The additions to the scsi_debug driver are for emulating this
property so we can run tests on it in the absence of an actual UFS
device.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZf3owyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdaeAQCdEb5j
d7sJiKTpSpgH0znAJ7UTvwUh6UJu/dj47D4qngEA43IULG8+L4GXDHL9mwCfeHC5
PU7UewCEqnRBSBTdiEw=
=9Xr2
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"The vfs has long had a write lifetime hint mechanism that gives the
expected longevity on storage of the data being written. f2fs was the
original consumer of this and used the hint for flash data placement
(mostly to avoid write amplification by placing objects with similar
lifetimes in the same erase block).
More recently the SCSI based UFS (Universal Flash Storage) drivers
have wanted to take advantage of this as well, for the same reasons as
f2fs, necessitating plumbing the write hints through the block layer
and then adding it to the SCSI core.
The vfs write_hints already taken plumbs this as far as block and this
completes the SCSI core enabling based on a recently agreed reuse of
the old write command group number. The additions to the scsi_debug
driver are for emulating this property so we can run tests on it in
the absence of an actual UFS device"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Maintain write statistics per group number
scsi: scsi_debug: Implement GET STREAM STATUS
scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page
scsi: scsi_debug: Allocate the MODE SENSE response from the heap
scsi: scsi_debug: Rework subpage code error handling
scsi: scsi_debug: Rework page code error handling
scsi: scsi_debug: Support the block limits extension VPD page
scsi: scsi_debug: Reduce code duplication
scsi: sd: Translate data lifetime information
scsi: scsi_proto: Add structures and constants related to I/O groups and streams
scsi: core: Query the Block Limits Extension VPD page
-----BEGIN PGP SIGNATURE-----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=bgrV
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.9-20240322' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"One patch just missed the initial pull, the rest are either fixes or
small cleanups that make our life easier for the next kernel:
- Fix a potential leak in error handling of pinned pages, and clean
it up (Gabriel, Pavel)
- Fix an issue with how read multishot returns retry (me)
- Fix a problem with waitid/futex removals, if we hit the case of
needing to remove all of them at exit time (me)
- Fix for a regression introduced in this merge window, where we
don't always have sr->done_io initialized if the ->prep_async()
path is used (me)
- Fix for SQPOLL setup error handling (me)
- Fix for a poll removal request being delayed (Pavel)
- Rename of a struct member which had a confusing name (Pavel)"
* tag 'io_uring-6.9-20240322' of git://git.kernel.dk/linux:
io_uring/sqpoll: early exit thread if task_context wasn't allocated
io_uring: clear opcode specific data for an early failure
io_uring/net: ensure async prep handlers always initialize ->done_io
io_uring/waitid: always remove waitid entry for cancel all
io_uring/futex: always remove futex entry for cancel all
io_uring: fix poll_remove stalled req completion
io_uring: Fix release of pinned pages when __io_uaddr_map fails
io_uring/kbuf: rename is_mapped
io_uring: simplify io_pages_free
io_uring: clean rings on NO_MMAP alloc fail
io_uring/rw: return IOU_ISSUE_SKIP_COMPLETE for multishot retry
io_uring: don't save/restore iowait state
the 6.9 merge. Also fix the recheck code to ensure it issues bios
with proper alignment.
- Fix DM snapshot's dm_exception_table_exit() to schedule while
handling an large exception table during snapshot device shutdown.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmX9seYACgkQxSPxCi2d
A1oKMwgA2xYlw4JooN7PIvGb7IiIfzXfdVmmtTiHBzuvhAOg7f014UbUoubnNz0z
DogzvWVX4Svieh60EYVaaHdWWJWBQnNLO5qJCEmt4sMYXU9pnpJnfWCQiP3EHKL5
8fVsoCeEK1Eh+eYghG7731zSaqqavwTYm3rlzcuq5hPa+cW6b2OgxzUJybEfsXhi
9Y5lc7LUEuLuSRAnL/Msg4Rmo6eR45GOmY9EcULx0hf/plJrho9J5cp07KJ5ViXK
ciYTGy3bkoVxKufepdINaKZyI2/3PEDZm2cTfidubhSj33Zgce2c7oJz+1F9Q9wf
bixaB+mI2pMVwFzllrkxnl8yIGgoAw==
=D74z
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix a memory leak in DM integrity recheck code that was added during
the 6.9 merge. Also fix the recheck code to ensure it issues bios
with proper alignment.
- Fix DM snapshot's dm_exception_table_exit() to schedule while
handling an large exception table during snapshot device shutdown.
* tag 'for-6.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-integrity: align the outgoing bio in integrity_recheck
dm snapshot: fix lockup in dm_exception_table_exit
dm-integrity: fix a memory leak when rechecking the data
