Currently we allow a block group not to be marked read-only for scrub.
But for RAID56 block groups if we require the block group to be
read-only, then we're allowed to use cached content from scrub stripe to
reduce unnecessary RAID56 reads.
So this patch would:
- Make btrfs_inc_block_group_ro() try harder
During my tests, for cases like btrfs/061 and btrfs/064, we can hit
ENOSPC from btrfs_inc_block_group_ro() calls during scrub.
The reason is if we only have one single data chunk, and trying to
scrub it, we won't have any space left for any newer data writes.
But this check should be done by the caller, especially for scrub
cases we only temporarily mark the chunk read-only.
And newer data writes would always try to allocate a new data chunk
when needed.
- Return error for scrub if we failed to mark a RAID56 chunk read-only
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If static allocation and dynamic allocation GPIOs are present,
dynamic allocation pollutes the numberspace for static allocation,
causing static allocation to fail.
Enforce dynamic allocation above GPIO_DYNAMIC_BASE.
Seen on a GTA04 when omap-gpio (static) and twl-gpio (dynamic)
raced:
[some successful registrations of omap_gpio instances]
[ 2.553833] twl4030_gpio twl4030-gpio: gpio (irq 145) chaining IRQs 161..178
[ 2.561401] gpiochip_find_base: found new base at 160
[ 2.564392] gpio gpiochip5: (twl4030): added GPIO chardev (254:5)
[ 2.564544] gpio gpiochip5: registered GPIOs 160 to 177 on twl4030
[...]
[ 2.692169] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[ 2.697357] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[ 2.703643] gpiochip_find_base: found new base at 178
[ 2.704376] gpio gpiochip6: (omap-gpmc): added GPIO chardev (254:6)
[ 2.704589] gpio gpiochip6: registered GPIOs 178 to 181 on omap-gpmc
[...]
[ 2.840393] gpio gpiochip7: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 2.849365] gpio gpiochip7: (gpio-160-191): GPIO integer space overlap, cannot add chip
[ 2.857513] gpiochip_add_data_with_key: GPIOs 160..191 (gpio-160-191) failed to register, -16
[ 2.866149] omap_gpio 48310000.gpio: error -EBUSY: Could not register gpio chip
On that device it is fixed invasively by
commit 92bf78b33b ("gpio: omap: use dynamic allocation of base")
but let's also fix that for devices where there is still
a mixture of static and dynamic allocation.
Fixes: 7b61212f2a ("gpiolib: Get rid of ARCH_NR_GPIOS")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
It turned out that Aya Neo Air Plus had a different board name than
expected.
This patch changes Aya Neo Air's quirk to account for that, as both
devices share "Air" in DMI product name.
Tested on Air claiming to be an Air Pro, and on Air Plus.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515184843.1552612-1-maccraft123mc@gmail.com
This driver's debugfs files have had a read operation since commit
2a9e27408e ("gpio: mockup: rework debugfs interface"), but were
still being created with write-only mode bits. Update them to
indicate that the files can also be read.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 2a9e27408e ("gpio: mockup: rework debugfs interface")
Cc: stable@kernel.org # v5.1+
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Turns out I missed a few patches due to use of old addresses by
senders. Add a mailmap entry with my old addresses.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In igb_hash_mc_addr() the expression:
"mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]"
shift by more than 7 bits always yields zero, so hash becomes not so different.
Add initialization with bit_shift = 1 and add a loop condition to ensure
bit_shift will be always in [1..8] range.
Fixes: 9d5c824399 ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony nguyen says:
====================
Intel Wired LAN Driver Updates 2023-05-16
This series contains updates to ice and iavf drivers.
Ahmed adds setting of missed condition for statistics which caused
incorrect reporting of values for ice. For iavf, he removes a call to set
VLAN offloads during re-initialization which can cause incorrect values
to be set.
Dawid adds checks to ensure VF is ready to be reset before executing
commands that will require it to be reset on ice.
---
v2:
Patch 2
- Redo commit message
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
According to datasheet, the command opcode must be specified
into bits [14:12] of the Extended Port Control register (EPC).
Fixes: de776d0d31 ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marco Migliore <m.migliore@tiesse.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
cas_saturn_firmware_init() allocates some memory using vmalloc(). This
memory is freed in the .remove() function but not it the error handling
path of the probe.
Add the missing vfree() to avoid a memory leak, should an error occur.
Fixes: fcaa40669c ("cassini: use request_firmware")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Under certain circumstances we send two EFLUSH commands, resulting in two
EFLUSH ack packets, while only expecting a single EFLUSH ack.
This can cause the driver Tx flush completion to get out of sync.
To avoid this problem, don't enable the "Transmit buffer flush done" (TFD)
interrupt and remove the code handling it.
Now we only send EFLUSH command after receiving status packet with
"Init detected" (IDET) bit set.
Fixes: 26ad340e58 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-6-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Empty the "Shared receive buffer" (SRB) in probe, to assure we start in a
known state, and don't process any irrelevant packets.
Fixes: 26ad340e58 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The listen-only bit was never cleared, causing the controller to
always use listen-only mode, if previously set.
Fixes: 26ad340e58 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Set can.state to CAN_STATE_STOPPED in kvaser_pciefd_stop().
Without this fix, wrong CAN state was repported after the interface was
brought down.
Fixes: 26ad340e58 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
clang warns about an unpacked structure inside of a packed one:
drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
The problem here is that the anonymous union has the default alignment
from its members, apparently because the original author mixed up the
placement of the __packed attribute by placing it next to the struct
member rather than the union definition. As the struct itself is
also marked as __packed, there is no need to mark its members, so just
move the annotation to the inner type instead.
As Michael noted, the same problem is present in b43legacy, so
change both at the same time.
Acked-by: Michael Büsch <m@bues.ch>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/oe-kbuild-all/202305160749.ay1HAoyP-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230516183442.536589-1-arnd@kernel.org
The Allwinner sunxi-mmc controller cannot handle word (16 bit)
transfers. So and sdio_{read,write}w fails with messages like the
following example using an RTL8822BS (but the same problems were also
observed with RTL8822CS and RTL8723DS chips):
rtw_8822bs mmc1:0001:1: Firmware version 27.2.0, H2C version 13
sunxi-mmc 4021000.mmc: unaligned scatterlist: os f80 length 2
sunxi-mmc 4021000.mmc: map DMA failed
rtw_8822bs mmc1:0001:1: sdio read16 failed (0x10230): -22
Use two consecutive single byte accesses for word operations instead. It
turns out that upon closer inspection this is also what the vendor
driver does, even though it does have support for sdio_{read,write}w. So
we can conclude that the rtw88 chips do support word access but only on
SDIO controllers that also support it. Since there's no way to detect if
the controller supports word access or not the rtw88 sdio driver
switches to the easiest approach: avoiding word access.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Closes: https://lore.kernel.org/linux-wireless/527585e5-9cdd-66ed-c3af-6da162f4b720@lwfinger.net/
Reported-by: Rudi Heitbaum <rudi@heitbaum.com>
Link: https://github.com/LibreELEC/LibreELEC.tv/pull/7837#issue-1708469467
Fixes: 65371a3f14 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets")
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230515195043.572375-1-martin.blumenstingl@googlemail.com
-----BEGIN PGP SIGNATURE-----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=/LPA
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2023-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2023-05-16
1) Don't check the policy default if we have an allow
policy. Fix from Sabrina Dubroca.
2) Fix netdevice refount usage on offload.
From Leon Romanovsky.
3) Use netdev_put instead of dev_puti to correctly release
the netdev on failure in xfrm_dev_policy_add.
From Leon Romanovsky.
4) Revert "Fix XFRM-I support for nested ESP tunnels"
This broke Netfilter policy matching.
From Martin Willi.
5) Reject optional tunnel/BEET mode templates in outbound policies
on netlink and pfkey sockets. From Tobias Brunner.
6) Check if_id in inbound policy/secpath match to make
it symetric to the outbound codepath.
From Benedict Wong.
* tag 'ipsec-2023-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Check if_id in inbound policy/secpath match
af_key: Reject optional tunnel/BEET mode templates in outbound policies
xfrm: Reject optional tunnel/BEET mode templates in outbound policies
Revert "Fix XFRM-I support for nested ESP tunnels"
xfrm: Fix leak of dev tracker
xfrm: release all offloaded policy memory
xfrm: don't check the default policy if the policy allows the packet
====================
Link: https://lore.kernel.org/r/20230516052405.2677554-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmRiloITHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6KQjB/920q1esTr4MiOeVHShwj6OGqfjcWlf
PvPzoMbMy2KuRgPF08HL3PO/fnrttSkI+qn1jJFD+IE+0QERbFf3adTOns+iiM2d
li9kLQgFf6a6ne2lRFwGXsxIuABzGBpq4LO4TDl7CRx2U0FZgETVV/8ImqAaxafp
ryS5ko3gghHmxAg96RjaPEMhZjaYpDqpY+AR6lD445CpzhGs5nhO/WKyJRm5wgue
PlCUVjPyE9Wyf11e0MDkmFEAV4nR8qHIm0TnVz1h9Z3oOPWuvoOHJiXijrgjpKP8
kfhQcBE8HXi3euOH/RUSr54euk37sLk0UpOdkrq7mp2Lu1pb/IfNznrg
=hpEt
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.4-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-05-15
The first 2 patches are by Oliver Hartkopp and allow the
MSG_CMSG_COMPAT flag for isotp and j1939.
The next patch is by Oliver Hartkopp, too and adds missing CAN XL
support in can_put_echo_skb().
Geert Uytterhoeven's patch let's the bxcan driver depend on
ARCH_STM32.
The last 5 patches are from Dario Binacchi and also affect the bxcan
driver. The bxcan driver hit mainline with v6.4-rc1 and was originally
written for IP cores containing 2 CAN interfaces with shared
resources. Dario's series updates the DT bindings and driver to
support IP cores with a single CAN interface instance as well as
adding the bxcan to the stm32f746's device tree.
* tag 'linux-can-fixes-for-6.4-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
ARM: dts: stm32: add CAN support on stm32f746
can: bxcan: add support for single peripheral configuration
ARM: dts: stm32: add pin map for CAN controller on stm32f7
ARM: dts: stm32f429: put can2 in secondary mode
dt-bindings: net: can: add "st,can-secondary" property
can: CAN_BXCAN should depend on ARCH_STM32
can: dev: fix missing CAN XL support in can_put_echo_skb()
can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flag
can: isotp: recvmsg(): allow MSG_CMSG_COMPAT flag
====================
Link: https://lore.kernel.org/r/20230515204722.1000957-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'__net_initdata' becomes a no-op with CONFIG_NET_NS=y, but when this
option is disabled it becomes '__initdata', which means the data can be
freed after the initialization phase. This annotation is obviously
incorrect for the devlink net device notifier block which is still
registered after the initialization phase [1].
Fix this crash by removing the '__net_initdata' annotation.
[1]
general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 117 Comm: (udev-worker) Not tainted 6.4.0-rc1-custom-gdf0acdc59b09 #64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:notifier_call_chain+0x58/0xc0
[...]
Call Trace:
<TASK>
dev_set_mac_address+0x85/0x120
dev_set_mac_address_user+0x30/0x50
do_setlink+0x219/0x1270
rtnl_setlink+0xf7/0x1a0
rtnetlink_rcv_msg+0x142/0x390
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x188/0x270
netlink_sendmsg+0x214/0x470
__sys_sendto+0x12f/0x1a0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: e93c9378e3 ("devlink: change per-devlink netdev notifier to static one")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/netdev/600ddf9e-589a-2aa0-7b69-a438f833ca10@samsung.com/
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230515162925.1144416-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target,
scsi_queue_rq() would return BLK_STS_RESOURCE and the related request would
be requeued. The timeout of this request would not fire, no one would
increase iodone_cnt.
The above flow would result the iodone_cnt smaller than iorequest_cnt. So
decrease the iorequest_cnt if dispatch failed to workaround the issue.
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Reported-by: Ming Lei <ming.lei@redhat.com>
Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com
Link: https://lore.kernel.org/r/20230515070156.1790181-3-haowenchao2@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a SCSI request, storvsc pre-allocates space for up to
MAX_PAGE_BUFFER_COUNT physical frame numbers to be passed to Hyper-V. If
the size of the I/O request requires more PFNs, a separate memory area of
exactly the correct size is dynamically allocated.
But when the pre-allocated area is used, current code always passes
MAX_PAGE_BUFFER_COUNT PFNs to Hyper-V, even if fewer are needed. While
this doesn't break anything because the additional PFNs are always zero,
more bytes than necessary are copied into the VMBus channel ring buffer.
This takes CPU cycles and wastes space in the ring buffer. For a typical 4
Kbyte I/O that requires only a single PFN, 248 unnecessary bytes are
copied.
Fix this by setting the payload_sz based on the actual number of PFNs
required, not the size of the pre-allocated space.
Reported-by: John Starks <jostarks@microsoft.com>
Fixes: 8f43710543 ("scsi: storvsc: Support PAGE_SIZE larger than 4K")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1684171241-16209-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The rt5682 driver switches its regmap to cache-only when the
device suspends and back to regular mode on resume. When the
jack detect interrupt fires rt5682_irq() schedules the jack
detect work. This can result in invalid reads from the regmap
in cache-only mode if the work runs before the device has
resumed:
[ 56.245502] rt5682 9-001a: ASoC: error at soc_component_read_no_lock on rt5682.9-001a for register: [0x000000f0] -16
Disable the jack detection interrupt during suspend and
re-enable it on resume. The driver already schedules the
jack detection work on resume, so any state change during
suspend is still handled.
This is essentially the same as commit f7d00a9be1 ("SoC:
rt5682s: Disable jack detection interrupt during suspend")
for the rt5682s.
Cc: stable@kernel.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org
Link: https://lore.kernel.org/r/20230516164629.1.Ibf79e94b3442eecc0054d2b478779cc512d967fc@changeid
Signed-off-by: Mark Brown <broonie@kernel.org
When we run syzkaller we get below Out of Bounds error.
"KASAN: slab-out-of-bounds Read in regcache_flat_read"
Below is the backtrace of the issue:
BUG: KASAN: slab-out-of-bounds in regcache_flat_read+0x10c/0x110
Read of size 4 at addr ffffff8088fbf714 by task syz-executor.4/14144
CPU: 6 PID: 14144 Comm: syz-executor.4 Tainted: G W
Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT)
Call trace:
dump_backtrace+0x0/0x4ec
show_stack+0x34/0x50
dump_stack_lvl+0xdc/0x11c
print_address_description+0x30/0x2d8
kasan_report+0x178/0x1e4
__asan_report_load4_noabort+0x44/0x50
regcache_flat_read+0x10c/0x110
regcache_read+0xf8/0x5a0
_regmap_read+0x45c/0x86c
_regmap_update_bits+0x128/0x290
regmap_update_bits_base+0xc0/0x15c
snd_soc_component_update_bits+0xa8/0x22c
snd_soc_component_write_field+0x68/0xd4
tx_macro_put_dec_enum+0x1d0/0x268
snd_ctl_elem_write+0x288/0x474
By Error checking and checking valid values issue gets rectifies.
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com
Link: https://lore.kernel.org/r/20230511112532.16106-1-quic_visr@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org
Since MAXQ is 0-based value, add one to obtain number of hardware queues.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Link: https://lore.kernel.org/r/20230504154454.26654-4-powen.kao@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Naming the functions after standard operators like sizeof() may cause
confusion. Rename it to ufshcd_get_ucd_size().
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Link: https://lore.kernel.org/r/20230504154454.26654-3-powen.kao@mediatek.com
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The transfer command descriptor is allocated in ufshcd_memory_alloc() and
referenced by the transfer request descriptor with stride size
sizeof_utp_transfer_cmd_desc() instead of sizeof(struct
utp_transfer_cmd_desc).
Consequently, computing tag by address offset should also refer to the
same stride.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Link: https://lore.kernel.org/r/20230504154454.26654-2-powen.kao@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The logic used for power_supply_is_system_supplied() counts all power
supplies and assumes that the system is running from AC if there is
either a non-battery power-supply reporting to be online or if no
power-supplies exist at all.
The second rule is for desktop systems, that don't have any
battery/charger devices. These systems will incorrectly report to be
powered from battery once a device scope power-supply is registered
(e.g. a HID device), since these power-supplies increase the counter.
Apart from HID devices, recent dGPUs provide UCSI power supplies on a
desktop systems. The dGPU by default doesn't have anything plugged in so
it's 'offline'. This makes power_supply_is_system_supplied() return 0
with a count of 1 meaning all drivers that use this get a wrong judgement.
To fix this case adjust the logic to also examine the scope of the power
supply. If the power supply is deemed a device power supply, then don't
count it.
Cc: Evan Quan <Evan.Quan@amd.com>
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the :Author: markup instead of making it a chapter heading.
This cleans up the table of contents for this file.
Fixes: 7f46a240b0 ("[PATCH] ramfs, rootfs, and initramfs docs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Landley <rob@landley.net>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230508055928.3548-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Several of the sections are missing underlines. This makes the
generated contents have missing entries, so add the underlines.
Fixes: 16c01b20ae ("doc/filesystems: more mount cleanups")
Fixes: 9cfcceea8f ("[PATCH] Complete description of shared subtrees.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230508055938.6550-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* improve the short description of localmodconfig in the step-by-step
guide while fixing its broken first sentence
* briefly mention immutable Linux distributions
* use '--shallow-exclude=v6.0' throughout the document
* instead of "git reset --hard; git checkout ..." use "git checkout
--force ..." in the step-by-step guide: this matches the TLDR and is
one command less to execute. This led to a few small adjustments to
the text and the flow in the surrounding area.
* fix two thinkos in the section explaining full git clones
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/6f4684b9a5d11d3adb04e0af3cfc60db8b28eeb2.1684140700.git.linux@leemhuis.info
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Use capital letters in acronyms for CD-ROM, FPGA, and PCMCIA.
Use capital letter in the first word of chapter headings for
Locking, Timers, and "Brief tutorial on CRC computation".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Moritz Fischer <mdf@kernel.org>
Cc: Wu Hao <hao.wu@intel.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20230516001518.14514-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
get_line_out_pfx() may trigger an Oops by overflowing the static array
with more than 8 channels. This was reported for MacBookPro 12,1 with
Cirrus codec.
As a workaround, extend for the 9.1 channels and also fix the
potential Oops by unifying the code paths accessing the same array
with the proper size check.
Reported-by: Olliver Schinagl <oliver@schinagl.nl>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/64d95eb0-dbdb-cff8-a8b1-988dc22b24cd@schinagl.nl
Link: https://lore.kernel.org/r/20230516184412.24078-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To pick the changes in these csets:
7608f70adc ("s390: wire up memfd_secret system call")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible (adapted from the x86_64 test output):
# perf trace -v -e memfd_secret
event qualifier tracepoint filter: (common_pid != 13375 && common_pid != 3713) && (id == 447)
^C#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep memfd_secret tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
447 common memfd_secret sys_memfd_secret
$
This addresses this perf build warnings:
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/lkml/ZGPMW0p++D1Jdvf6@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ddc65971bb ("prctl: add PR_GET_AUXV to copy auxv to userspace")
To pick the changes in:
That don't result in any changes in tooling:
$ tools/perf/trace/beauty/prctl_option.sh > before
$ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
$ tools/perf/trace/beauty/prctl_option.sh > after
$ diff -u before after
$
This actually adds a new prctl arg, but it has to be dealt with
differently, as it is not in sequence with the other arguments.
Just silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some metrics may not have a metric_group which can result in segvs
with "perf stat --topdown". Add a condition for the no metric_group
case.
Fixes: 1647cd5b88 ("perf stat: Implement --topdown using json metrics")
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230515224530.671331-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
More fixes that came in since the merge window, the bulk of which are
for the SOF code, I suspect as a result of the wide usage, active
development and large code size rather than huge quality problems.
There's also a couple of MAINTAINERS updates and some new device quirks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRjoe4ACgkQJNaLcl1U
h9BNiwf/SRv0HUMuaLHV/a7TUoLyFZbYIR7OoYNWZcGcNb01C12sEcjaFm38p7wD
sjzAAECQyfLgulLIaqc68lcOzF5+QfM28Gqfhw9mKVf9lLQaOvgzJfZ0gZG/CIRk
8MpqsFYF+XRsvmJy8xxS8PMaOCiBMJd31EFHt5dYr/rXJMmJnK7jwpGW5Gsf1o/N
naISPkeDIbjsmSalTyBXOfgebS/tWvcW4/Gsx6Rs37kH8e1xP72gOFjRy5bQXiVk
3o0eHVK7kw7oUacBUjAgxn1mWkeyhSFl235Nh6R89L6XDNeYr254SRFd3Y9kxeDq
Wx/H3RLjNhr8yA12XGJhrQ4/bK6Ktw==
=dYo0
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.4-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.4
More fixes that came in since the merge window, the bulk of which are
for the SOF code, I suspect as a result of the wide usage, active
development and large code size rather than huge quality problems.
There's also a couple of MAINTAINERS updates and some new device quirks.
The rs_drv_get_rate flow reads the lq_sta to return the optimal rate
for tx frames. This read flow is not protected thereby leaving
a small window, a few instructions wide, open to contention by an
asynchronous rate update. Indeed this race condition was hit and the
update occurred in the middle of the read.
Fix this by locking the lq_sta struct during read.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.b52c9ed5c379.I15290b78e0d966c1b68278263776ca9de841d5fe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This bitmap equals to zero when in a non-MLO mode, and then we won't
be iterating on any link. Use for_each_sta_active_link() instead, as
it handles also the case of non-MLO mode.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.f32a8c08730a.Ib02248cd0b7f2bc885f91005c3c110dd027f9dcd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the firmware sends us a corrupted MCC response with
n_channels much larger than the command response can be,
we might copy far too much (uninitialized) memory and
even crash if the n_channels is large enough to make it
run out of the one page allocated for the FW response.
Fix that by checking the lengths. Doing a < comparison
would be sufficient, but the firmware should be doing
it correctly, so check more strictly.
Fixes: dcaf9f5ecb ("iwlwifi: mvm: add MCC update FW API")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.d7b233139eb4.I51fd319df8e9d41881fc8450e83d78049518a79a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In iwl_mvm_mld_update_sta(), if the flow doesn't enter
for_each_sta_active_link(), the default value is returned.
Set this default to -EINVAL instead of 0 to better reflect
this.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.98b7e3aacf0b.I2fc274dd7e374ef7fac8e26d71c9cd73323da665@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
RCU protected fw_id_to_mac_id can be initialized with either
an error code or NULL. Thus, after dereferencing need to check
the value with IS_ERR_OR_NULL() and not only that it is not NULL.
Fix it.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.ec5f2880e81c.Ifa8c0f451df2835bde800f5c3670cc46238a3bd8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The DBGI dump is (unsurprisingly) of type DBGI, not SRAM.
This leads to bad register accesses because the union is
built differently, there's no allocation ID, and thus the
allocation ID ends up being 0x8000.
Note that this was already wrong for DRAM vs. SMEM since
they use different parts of the union, but the allocation
ID is at the same place, so it worked.
Fix all of this but set the allocation ID in a way that
the offset calculation ends up without any offset.
Fixes: 34bc27783a ("iwlwifi: yoyo: fix DBGI_SRAM ini dump header.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.19a302ae4c65.I12272599f7c1930666157b9d5e7f81fe9ec4c421@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
