Add -regulator suffix to regulator names on Banana Pi R2 Pro board as
discussed on Mailinglist
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220906164212.84835-1-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
only user_led2 (blue) is supported.
user_led1 (green) is not connected to any gpio so it cannot be
controlled.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220908031726.1307105-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the new rk817 charger driver to the Odroid Go Advance. Create a
monitored battery node as well for the charger to use. All values
from monitored battery are gathered from the BSP kernel for the
Odroid Go Advance provided by HardKernel.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Link: https://lore.kernel.org/r/20220827021623.23829-5-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Voltage constraints on vccio_sd are invalid. They don't match the voltages
that LDO9 can generate, and this causes rk808-regulator driver to fail
to probe with -EINVAL when it tries to apply the constraints during boot.
Fix the constraints to something that LDO9 can be actually configured for.
Fixes: 78a21c7d59 ("arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Caleb Connolly <kc@postmarketos.org>
Reviewed-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Tested-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Link: https://lore.kernel.org/r/20220904233652.3197885-1-megi@xff.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for Radxa ROCK 4C+ SBC.
Key differences of 4C+ compared to previous ROCK Pi 4.
- Rockchip RK3399-T SoC
- DP from 4C replaced with micro HDMI 2K@60fps
- 4-lane MIPI DSI with 1920*1080
- RK817 Audio codec
Also, an official naming convention from Radxa mention to remove
Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not
Radxa ROCK Pi 4C+.
Signed-off-by: Stephen Chen <stephen@radxa.com>
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-3-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3399-T is down-clocked version of RK3399 SoC operated at 1.5GHz.
Add CPU operating points table for it.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Document the dt-bindings for Radxa ROCK 4C+ SBC.
Key differences of 4C+ compared to previous ROCK Pi 4.
- Rockchip RK3399-T SoC
- DP from 4C replaced with micro HDMI 2K@60fps
- 4-lane MIPI DSI with 1920*1080
- RK817 Audio codec
Also, an official naming convention from Radxa mention to remove
Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not
Radxa ROCK Pi 4C+.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is a basic DT containing regulators and UART, intended to be a
base that myself and others can add additional nodes in future patches.
Tested to work: booting from eMMC/SD, output over UART.
https://wiki.pine64.org/wiki/PinePhone_Pro
This is derived from the community pine64-org repo[0] with fixes from
https://megous.com/git/linux.
0. 261d3b5f8a
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
[no SoB, but Kamil is happy for this patch to be submitted]
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Co-developed-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Signed-off-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Reviewed-by: Caleb Connolly <kc@postmarketos.org>
Reviewed-by: Nícolas F. R. A. Prado <n@nfraprado.net>
Tested-by: Nícolas F. R. A. Prado <n@nfraprado.net>
Link: https://lore.kernel.org/r/20220829050040.17330-2-tom@tom-fitzhenry.me.uk
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
EAIDK-610 is from OPEN AI LAB and popularly used by university
students.
Specification:
- Rockchip RK3399
- LPDDR3 4GB
- TF sd scard slot
- eMMC
- AP6255 for WiFi + BT
- Gigabit ethernet
- HDMI out
- 40 pin header
- USB 2.0 x 2
- USB 3.0 x 1
- USB 3.0 Type-C x 1
- 12V DC Power supply
This patch is test on Armbain and Glodroid with
HDMI/GPU/USB HOST/Type-C ADB/WIFI/BT.
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20220709103016.2754044-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
EAIDK-610 is a rk3399 based board from OPEN AI LAB
and popularly used by university students.
Specification:
- Rockchip RK3399
- LPDDR3 4GB
- TF sd scard slot
- eMMC
- AP6255 for WiFi + BT
- Gigabit ethernet
- HDMI out
- 40 pin header
- USB 2.0 x 2
- USB 3.0 x 1
- USB 3.0 Type-C x 1
- 12V DC Power supply
Signed-off-by: Andy Yan <andyshrk@163.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220709103001.2753992-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
set PCIe related regulators to always on.
Suggested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220825193836.54262-6-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add nodes to rk356x devicetree to support PCIe v3.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220825193836.54262-5-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On the Radxa ROCK3 Model A the I2C adapters related to the MIPI DSI
connector and the M.2/NGFF connector use the non-default pins.
Specify the correct pinctrl but leave the adapters disabled (as
they are supposed to be activated by overlays that describe the
external hardware).
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-3-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK3 Model A features a voltage regulator that provides
a 3V3 supply to the MIPI DSI connector. Add this regulator to the
device tree of the board.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-2-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK3 Model A features a voltage regulator that provides
a 3V3 supply to the MIPI CSI connector. Add this regulator to the
device tree of the board.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-1-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds the necessary device tree changes to enable analog
audio output on the PINE64 Quartz64 Model B with its RK809
codec.
The headphone detection pin is left out for now because I couldn't
get it to work and am not sure if it even matters, but for future
reference: It's pin GPIO4 RK_PC4, named HP_DET_L_GPIO4_C4 in the
schematic.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20220721083301.3711-1-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
installed at such instructions, possibly resulting in
incorrect execution (the wrong branch taken).
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=eXIr
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 kprobes fix from Ingo Molnar:
"Fix a kprobes bug in JNG/JNLE emulation when a kprobe is installed at
such instructions, possibly resulting in incorrect execution (the
wrong branch taken)"
* tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix JNG/JNLE emulation
- Fix a return value of traceprobe_parse_event_name()
- Fix NULL pointer dereference from failed ftrace enabling
- Fix NULL pointer dereference when asking for registers from eprobes
- Make eprobes consistent with kprobes/uprobes, filters and histograms
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYwKRrhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qosDAP9WySmPxjoMfR0hbjmnepLy2zJtBbIq
ABWR3LDrjvLlYwD9H/wrD+6ctOZtXh5XJc0Vn5z6XEyNtqrVGSse7Lm+sg4=
=qb/R
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes for tracing:
- Fix a return value of traceprobe_parse_event_name()
- Fix NULL pointer dereference from failed ftrace enabling
- Fix NULL pointer dereference when asking for registers from eprobes
- Make eprobes consistent with kprobes/uprobes, filters and
histograms"
* tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have filter accept "common_cpu" to be consistent
tracing/probes: Have kprobes and uprobes use $COMM too
tracing/eprobes: Have event probes be consistent with kprobes and uprobes
tracing/eprobes: Fix reading of string fields
tracing/eprobes: Do not hardcode $comm as a string
tracing/eprobes: Do not allow eprobes to use $stack, or % for regs
ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
tracing/perf: Fix double put of trace event when init fails
tracing: React to error return from traceprobe_parse_event_name()
Make filtering consistent with histograms. As "cpu" can be a field of an
event, allow for "common_cpu" to keep it from being confused with the
"cpu" field of the event.
Link: https://lkml.kernel.org/r/20220820134401.513062765@goodmis.org
Link: https://lore.kernel.org/all/20220820220920.e42fa32b70505b1904f0a0ad@kernel.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 1e3bac71c5 ("tracing/histogram: Rename "cpu" to "common_cpu"")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Both $comm and $COMM can be used to get current->comm in eprobes and the
filtering and histogram logic. Make kprobes and uprobes consistent in this
regard and allow both $comm and $COMM as well. Currently kprobes and
uprobes only handle $comm, which is inconsistent with the other utilities,
and can be confusing to users.
Link: https://lkml.kernel.org/r/20220820134401.317014913@goodmis.org
Link: https://lore.kernel.org/all/20220820220442.776e1ddaf8836e82edb34d01@kernel.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 533059281e ("tracing: probeevent: Introduce new argument fetching code")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, if a symbol "@" is attempted to be used with an event probe
(eprobes), it will cause a NULL pointer dereference crash.
Both kprobes and uprobes can reference data other than the main registers.
Such as immediate address, symbols and the current task name. Have eprobes
do the same thing.
For "comm", if "comm" is used and the event being attached to does not
have the "comm" field, then make it the "$comm" that kprobes has. This is
consistent to the way histograms and filters work.
Link: https://lkml.kernel.org/r/20220820134401.136924220@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently when an event probe (eprobe) hooks to a string field, it does
not display it as a string, but instead as a number. This makes the field
rather useless. Handle the different kinds of strings, dynamic, static,
relational/dynamic etc.
Now when a string field is used, the ":string" type can be used to display
it:
echo "e:sw sched/sched_switch comm=$next_comm:string" > dynamic_events
Link: https://lkml.kernel.org/r/20220820134400.959640191@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The variable $comm is hard coded as a string, which is true for both
kprobes and uprobes, but for event probes (eprobes) it is a field name. In
most cases the "comm" field would be a string, but there's no guarantee of
that fact.
Do not assume that comm is a string. Not to mention, it currently forces
comm fields to fault, as string processing for event probes is currently
broken.
Link: https://lkml.kernel.org/r/20220820134400.756152112@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If in perf_trace_event_init(), the perf_trace_event_open() fails, then it
will call perf_trace_event_unreg() which will not only unregister the perf
trace event, but will also call the put() function of the tp_event.
The problem here is that the trace_event_try_get_ref() is called by the
caller of perf_trace_event_init() and if perf_trace_event_init() returns a
failure, it will then call trace_event_put(). But since the
perf_trace_event_unreg() already called the trace_event_put() function, it
triggers a WARN_ON().
WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20
If perf_trace_event_reg() does not call the trace_event_try_get_ref() then
the perf_trace_event_unreg() should not be calling trace_event_put(). This
breaks symmetry and causes bugs like these.
Pull out the trace_event_put() from perf_trace_event_unreg() and call it
in the locations that perf_trace_event_unreg() is called. This not only
fixes this bug, but also brings back the proper symmetry of the reg/unreg
vs get/put logic.
Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/
Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 1d18538e6a ("tracing: Have dynamic events have a ref counter")
Reported-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function traceprobe_parse_event_name() may set the first two function
arguments to a non-null value and still return -EINVAL to indicate an
unsuccessful completion of the function. Hence, it is not sufficient to
just check the result of the two function arguments for being not null,
but the return value also needs to be checked.
Commit 95c104c378 ("tracing: Auto generate event name when creating a
group of events") changed the error-return-value checking of the second
traceprobe_parse_event_name() invocation in __trace_eprobe_create() and
removed checking the return value to jump to the error handling case.
Reinstate using the return value in the error-return-value checking.
Link: https://lkml.kernel.org/r/20220811071734.20700-1-lukas.bulwahn@gmail.com
Fixes: 95c104c378 ("tracing: Auto generate event name when creating a group of events")
Acked-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
merge window and a fix for proper error handling in the remove path of
the iMX driver.
-----BEGIN PGP SIGNATURE-----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=aSFj
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A revert to fix a regression introduced this merge window and a fix
for proper error handling in the remove path of the iMX driver"
* tag 'i2c-for-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: Make sure to unregister adapter on remove()
Revert "i2c: scmi: Replace open coded device_get_match_data()"
-----BEGIN PGP SIGNATURE-----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=dod2
-----END PGP SIGNATURE-----
Merge tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
- memory leak fix
- two small cleanups
- trivial strlcpy removal
- update missing entry for cifs headers in MAINTAINERS file
* tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: move from strlcpy with unused retval to strscpy
cifs: Fix memory leak on the deferred close
cifs: remove useless parameter 'is_fsctl' from SMB2_ioctl()
cifs: remove unused server parameter from calc_smb_size()
cifs: missing directory in MAINTAINERS file
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.
Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.
The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.
Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.
Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637
Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.
So unregister the software resources even if resume failed, and only skip
the hardware access in that case.
Fixes: 588eb93ea4 ("i2c: imx: add runtime pm support to improve the performance")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- Fix module versioning broken on some architectures
- Make dummy-tools enable CONFIG_PPC_LONG_DOUBLE_128
- Remove -Wformat-zero-length, which has no warning instance
- Fix the order between drivers and libs in modules.order
- Fix false-positive warnings in clang-analyzer
-----BEGIN PGP SIGNATURE-----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=jk33
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix module versioning broken on some architectures
- Make dummy-tools enable CONFIG_PPC_LONG_DOUBLE_128
- Remove -Wformat-zero-length, which has no warning instance
- Fix the order between drivers and libs in modules.order
- Fix false-positive warnings in clang-analyzer
* tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/clang-tools: Remove DeprecatedOrUnsafeBufferHandling check
kbuild: fix the modules order between drivers and libs
scripts/Makefile.extrawarn: Do not disable clang's -Wformat-zero-length
kbuild: dummy-tools: pretend we understand __LONG_DOUBLE_128__
modpost: fix module versioning when a symbol lacks valid CRC
- Fix alignment for cpu map masks in event encoding.
- Support reading PERF_FORMAT_LOST, perf tool counterpart for a feature
that was added in this merge window.
- Sync perf tools copies of kernel headers: socket, msr-index, fscrypt,
cpufeatures, i915_drm, kvm, vhost, perf_event.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYv/jZAAKCRCyPKLppCJ+
J5ZWAP9P7qMcKppgzYqnHU7TX2tJoT7WbYpaf2lp0TkIpynKdAD9E+9FjbAnQznN
90DIIH/BljChgiUTkMxHaAl789XL1gU=
=UXWB
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix alignment for cpu map masks in event encoding.
- Support reading PERF_FORMAT_LOST, perf tool counterpart for a feature
that was added in this merge window.
- Sync perf tools copies of kernel headers: socket, msr-index, fscrypt,
cpufeatures, i915_drm, kvm, vhost, perf_event.
* tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Support reading PERF_FORMAT_LOST
libperf: Add a test case for read formats
libperf: Handle read format in perf_evsel__read()
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
tools headers kvm s390: Sync headers with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
perf cpumap: Fix alignment for masks in event encoding
perf cpumap: Compute mask size in constant time
perf cpumap: Synthetic events and const/static
perf cpumap: Const map for max()
- Fix a KVM crash on z12 and older machines caused by a wrong
assumption that Query AP Configuration Information is always
available.
- Lower severity of excessive Hypervisor filesystem error messages
when booting under KVM.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCYwB2ahccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8DSLAP4lScZKm0o1eCJ/impnmFydkKDO
SWHqP0ZTLNJvVtpp3gD+IpOLRAIPcBKA3+/c9nG35rw+TfoRbpbWbV70/PVpQgA=
=Vcv6
-----END PGP SIGNATURE-----
Merge tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Fix a KVM crash on z12 and older machines caused by a wrong
assumption that Query AP Configuration Information is always
available.
- Lower severity of excessive Hypervisor filesystem error messages
when booting under KVM.
* tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ap: fix crash on older machines based on QCI info missing
s390/hypfs: avoid error message under KVM
- Fix atomic sleep warnings at boot due to get_phb_number() taking a mutex with a
spinlock held on some machines.
- Add missing PMU selftests to .gitignores.
Thanks to: Guenter Roeck, Russell Currey.
-----BEGIN PGP SIGNATURE-----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=Yvlp
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix atomic sleep warnings at boot due to get_phb_number() taking a
mutex with a spinlock held on some machines.
- Add missing PMU selftests to .gitignores.
Thanks to Guenter Roeck and Russell Currey.
* tag 'powerpc-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Add missing PMU selftests to .gitignores
powerpc/pci: Fix get_phb_number() locking
A few minor fixes:
- Fix buffer management in SRP to correct a regression with the login
authentication feature from v5.17
- Don't iterate over non-present ports in mlx5
- Fix an error introduced by the foritify work in cxgb4
- Two bug fixes for the recently merged ERDMA driver
- Unbreak RDMA dmabuf support, a regresion from v5.19
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCYv/TNgAKCRCFwuHvBreF
YUVTAP9Sh9xQVDGLZro2fUI1eVLZvjbu7qWPm7tmUC3AptJSyQD9FvRbU2IVMyRM
iw38PPMWAAEukmib6xypsAC+/eUSpQM=
=+t0D
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A few minor fixes:
- Fix buffer management in SRP to correct a regression with the login
authentication feature from v5.17
- Don't iterate over non-present ports in mlx5
- Fix an error introduced by the foritify work in cxgb4
- Two bug fixes for the recently merged ERDMA driver
- Unbreak RDMA dmabuf support, a regresion from v5.19"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA: Handle the return code from dma_resv_wait_timeout() properly
RDMA/erdma: Correct the max_qp and max_cq capacities of the device
RDMA/erdma: Using the key in FMR WR instead of MR structure
RDMA/cxgb4: fix accept failure due to increased cpl_t5_pass_accept_rpl size
RDMA/mlx5: Use the proper number of ports
IB/iser: Fix login with authentication
This `clang-analyzer` check flags the use of memset(), suggesting a more
secure version of the API, such as memset_s(), which does not exist in
the kernel:
warning: Call to function 'memset' is insecure as it does not provide
security checks introduced in the C11 standard. Replace with analogous
functions that support length arguments or provides boundary checks such
as 'memset_s' in case of C11
[clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling]
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit b2c8855491 ("kbuild: update modules.order only when contained
modules are updated") accidentally changed the modules order.
Prior to that commit, the modules order was determined based on
vmlinux-dirs, which lists core-y/m, drivers-y/m, libs-y/m, in this order.
Now, subdir-modorder lists them in a different order: core-y/m, libs-y/m,
drivers-y/m.
Presumably, there was no practical issue because the modules in drivers
and libs are orthogonal, but there is no reason to have this distortion.
Get back to the original order.
Fixes: b2c8855491 ("kbuild: update modules.order only when contained modules are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There are no instances of this warning in the tree across several
difference architectures and configurations. This was added by
commit 26ea6bb1fe ("kbuild, LLVMLinux: Supress warnings unless W=1-3")
back in 2014, where it might have been necessary, but there are no
instances of it now so stop disabling it to increase warning coverage
for clang.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There is a test in powerpc's Kconfig which checks __LONG_DOUBLE_128__
and sets CONFIG_PPC_LONG_DOUBLE_128 if it is understood by the compiler.
We currently don't handle it, so this results in PPC_LONG_DOUBLE_128 not
being in super-config generated by dummy-tools. So take this into
account in the gcc script and preprocess __LONG_DOUBLE_128__ as "1".
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 7b4537199a ("kbuild: link symbol CRCs at final link,
removing CONFIG_MODULE_REL_CRCS"), module versioning is broken on
some architectures. Loading a module fails with "disagrees about
version of symbol module_layout".
On such architectures (e.g. ARCH=sparc build with sparc64_defconfig),
modpost shows a warning, like follows:
WARNING: modpost: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
Is "_mcount" prototyped in <asm/asm-prototypes.h>?
Previously, it was a harmless warning (CRC check was just skipped),
but now wrong CRCs are used for comparison because invalid CRCs are
just skipped.
$ sparc64-linux-gnu-nm -n vmlinux
[snip]
0000000000c2cea0 r __ksymtab__kstrtol
0000000000c2ceb8 r __ksymtab__kstrtoul
0000000000c2ced0 r __ksymtab__local_bh_enable
0000000000c2cee8 r __ksymtab__mcount
0000000000c2cf00 r __ksymtab__printk
0000000000c2cf18 r __ksymtab__raw_read_lock
0000000000c2cf30 r __ksymtab__raw_read_lock_bh
[snip]
0000000000c53b34 D __crc__kstrtol
0000000000c53b38 D __crc__kstrtoul
0000000000c53b3c D __crc__local_bh_enable
0000000000c53b40 D __crc__printk
0000000000c53b44 D __crc__raw_read_lock
0000000000c53b48 D __crc__raw_read_lock_bh
Please notice __crc__mcount is missing here.
When the module subsystem looks up a CRC that comes after, it results
in reading out a wrong address. For example, when __crc__printk is
needed, the module subsystem reads 0xc53b44 instead of 0xc53b40.
All CRC entries must be output for correct index accessing. Invalid
CRCs will be unused, but are needed to keep the one-to-one mapping
between __ksymtab_* and __crc_*.
The best is to fix all modpost warnings, but several warnings are still
remaining on less popular architectures.
Fixes: 7b4537199a ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS")
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
-----BEGIN PGP SIGNATURE-----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=y2HE
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release:
- Small series of patches for ublk (ZiyangZhang)
- Remove dead function (Yu)
- Fix for running a block queue in case of resource starvation
(Yufen)"
* tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
blk-mq: run queue no matter whether the request is the last request
blk-mq: remove unused function blk_mq_queue_stopped()
ublk_drv: do not add a re-issued request aborted previously to ioucmd's task_work
ublk_drv: update comment for __ublk_fail_req()
ublk_drv: check ubq_daemon_is_dying() in __ublk_rq_task_work()
ublk_drv: update iod->addr for UBLK_IO_NEED_GET_DATA
