This commit introduces multiple hardware variants of Lenovo Vibe K5.
- A6020a40 (msm8929-wingtech-wt82918hd)
- A6020a46/A6020l36 (msm8939-wingtech-wt82918)
- A6020a40 S616 H39 (msm8939-wingtech-wt82918hd)
These devices are added with support for many features, notably:
- Basic features like USB, mmc/sd storage, wifi, buttons, leds;
- Accelerometer;
- Touchscreen;
- Sound and modem.
Note that "HD" variant of K5 is based on msm8929 which is a lower bin
of msm8939 SoC. A simple dtsi is added for this soc along with the new
devices.
Unfortunately, despite the heavy similarities, the combination of minor
differences between variants make them incompatible between each other.
Signed-off-by: Adam Słaboń <asaillen@protonmail.com>
[Nikita: Minor cleanup, commit message]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240729-msm89xx-wingtech-init-v3-3-32c35476f098@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial device-tree for Lenovo A6000 (wt86518) and Lenovo A6010
(wt86528), which are MSM8916-based devices. These devices are quite
similar, so some configuration is shared in msm8916-wingtech-wt865x8.dtsi.
Lenovo A6000 (wt86518):
- storage (eMMC and uSD card);
- usb in peripheral mode;
- touchscreen;
- sensors;
- WiFi/BT;
- keys;
- battery and charger.
Lenovo A6010 (wt86528):
- storage (eMMC and uSD card);
- usb with extcon;
- touchscreen;
- sensors;
- WiFi/BT;
- keys;
- leds;
- battery;
Signed-off-by: Anton Bambura <jenneron@postmarketos.org>
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Nikita: minor cleanup]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240729-msm89xx-wingtech-init-v3-2-32c35476f098@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add compaitble values for some variants of Lenovo A6000/A6010/A6020
devices. These devices are based on designs from Wingtech so use it's
vendor prefix and part numbers for compatibles.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240729-msm89xx-wingtech-init-v3-1-32c35476f098@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
To make it easier for downstream projects and avoid duplication of work.
Makes the device bootable and enables all buttons, hall sensor, eMMC and SD-Card.
Signed-off-by: Alexander Reimelt <alexander.reimelt@posteo.de>
Link: https://lore.kernel.org/r/20240727201413.114317-3-alexander.reimelt@posteo.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
International variant of the LG G4 from 2015.
Signed-off-by: Alexander Reimelt <alexander.reimelt@posteo.de>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240727201413.114317-2-alexander.reimelt@posteo.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The phone has a Silergy SY7802 flash LED controller.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240624-sy7802-v5-3-7abc9d96bfa6@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Core Prime uses an Imagis IST3038 touchscreen that is connected to
blsp_i2c5. Add it to the device tree.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240723131441.1764-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node describing the RPMh shared memory that can be used to
retrieve statistics for the SoC low-power modes.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240723081357.1521942-1-quic_rjendra@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The phone has a Silergy SY7802 flash LED controller.
Tested-by: Stéphane Martins <stemartins@proton.me>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722-x5_sy7802-v1-1-b2ffeeaf8d2d@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable PCIe5 and the SDX65 modem.
Note that the modem may need to be flashed with firmware before use.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240722094249.26471-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the fifth PCIe controller and its PHY.
Note that using the GIC ITS with PCIe5 does not work currently so the
ITS mapping is left unspecified for now.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240722094249.26471-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable the PCIe6a perst pull-down resistor to save some power.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-12-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe6a pinctrl node appears to have been copied from the sc8280xp
CRD dts (via the x1e80100 CRD dts), which has the NVMe on pcie2a and
uses some funny indentation.
Fix up the node name to match the x1e80100 use and label and use only
tabs for indentation.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-11-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe4 PHY is powered by vreg_l3i (not vreg_l3j) on the CRD reference
design so assume the same applies to the Lenovo Yoga Slim 7x.
Fixes: 45247fe17d ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-10-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing PCIe4 perst, wake and clkreq GPIOs and pin config.
Fixes: d0e2f8f62d ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable the PCIe6a perst pull-down resistor to save some power.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe6a pinctrl node appears to have been copied from the sc8280xp
CRD dts (via the x1e80100 CRD dts), which has the NVMe on pcie2a.
Fix up the node name to match the x1e80100 use and label.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe4 PHY is powered by vreg_l3i (not vreg_l3j) on the CRD reference
design so assume the same applies to the Asus Vivobook S15.
Fixes: d0e2f8f62d ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable the PCIe6a perst pull-down resistor to save some power.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe6a pinctrl node appears to have been copied from the sc8280xp
CRD dts, which has the NVMe on pcie2a and uses some funny indentation.
Fix up the node name to match the x1e80100 use and label and use only
tabs for indentation.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe4 PHY is powered by vreg_l3i (not vreg_l3j) on the CRD so assume
the same applies to the QCP.
Fixes: f9a9c11471 ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable the PCIe6a perst pull-down resistor to save some power.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240722094249.26471-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe6a pinctrl node appears to have been copied from the sc8280xp
CRD dts, which has the NVMe on pcie2a and uses some funny indentation.
Fix up the node name to match the x1e80100 use and label and use only
tabs for indentation.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240722094249.26471-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The current PCIe domain numbers are off by one and do not match the
numbers that the UEFI firmware (and Windows) uses.
Fixes: 5eb83fc102 ("arm64: dts: qcom: x1e80100: Add PCIe nodes")
Cc: stable@vger.kernel.org # 6.9
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240722094249.26471-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Trigger type is incorrectly specified as IRQ_TYPE_EDGE_BOTH
instead of IRQ_TYPE_LEVEL_HIGH. This trigger type is not
supported for SPIs and results in probe failure with -EINVAL.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: 927173bf8a ("arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332")
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240723100151.402300-3-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the bus topology for PCIe domain 4 and add the ath12k
calibration variant so that the board file (calibration data) can be
loaded.
Signed-off-by: Patrick Wildt <patrick@blueri.se>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/ZpV7OeGNIGGpqNC0@windev.fritz.box
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Clean up the PCIe2a pinctrl node indentation which should use tabs only.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240719132522.9176-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable the PCIe perst pull-down resistors to save some power.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240719132522.9176-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Clean up the PCIe2a pinctrl node indentation which should use tabs only.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240719132522.9176-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disable the PCIe perst pull-down resistors to save some power.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240719132522.9176-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Grand Max uses an Imagis IST3038 touchscreen that is connected to
blsp_i2c5. Add it to the device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo06890@proton.me>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240718112715.6117-1-linmengbo06890@proton.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rename the pwm node from "pwm-vibrator" to "pwm" to conform to the dt schema.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240716135339.87192-1-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Change the HW model in sm8550-qrd.dts to a one closer to reality - where
the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
inside the package.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240716-topic-sm8x50-upstream-use-pmu-to-power-up-bt-v1-2-67b3755edf6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Change the HW model in sm8650-hdk.dts to a one closer to reality - where
the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
inside the package.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240716-topic-sm8x50-upstream-use-pmu-to-power-up-bt-v1-1-67b3755edf6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Remove the address in both the reg property and node name to adhere to
the bindings.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Link: https://lore.kernel.org/r/20240725-pmic-bindings-v3-2-d7f6007b530d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a label, which is a required property, to the wled node.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Link: https://lore.kernel.org/r/20240725-pmic-bindings-v3-1-d7f6007b530d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add gpio-keys for exposing the LID switch state, similar to
sc8280xp-lenovo-thinkpad-x13s.dts. Only the GPIO number is different.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240710-x1e80100-crd-lid-v1-1-0156e8a62af6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It's absent on (most?) laptops that only have 2 type-C ports (of which
there are quite a few, and coming upstream too).
Keep it disabled by default and re-enable it on actual users.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240711-topic-hhh-v1-2-a1b6b716685f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Adhere to the convention: pad the addresses to 8 hex digits and use
lowercase letters.
Compile tested, no difference.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240711-topic-hhh-v1-1-a1b6b716685f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
