mirror of
https://github.com/torvalds/linux.git
synced 2026-08-01 12:11:59 +02:00
fe4840df0b
1368810 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Luiz Augusto von Dentz
|
fe4840df0b |
Bluetooth: SMP: If an unallowed command is received consider it a failure
If a command is received while a bonding is ongoing consider it a
pairing failure so the session is cleanup properly and the device is
disconnected immediately instead of continuing with other commands that
may result in the session to get stuck without ever completing such as
the case bellow:
> ACL Data RX: Handle 2048 flags 0x02 dlen 21
SMP: Identity Information (0x08) len 16
Identity resolving key[16]: d7e08edef97d3e62cd2331f82d8073b0
> ACL Data RX: Handle 2048 flags 0x02 dlen 21
SMP: Signing Information (0x0a) len 16
Signature key[16]: 1716c536f94e843a9aea8b13ffde477d
Bluetooth: hci0: unexpected SMP command 0x0a from XX:XX:XX:XX:XX:XX
> ACL Data RX: Handle 2048 flags 0x02 dlen 12
SMP: Identity Address Information (0x09) len 7
Address: XX:XX:XX:XX:XX:XX (Intel Corporate)
While accourding to core spec 6.1 the expected order is always BD_ADDR
first first then CSRK:
When using LE legacy pairing, the keys shall be distributed in the
following order:
LTK by the Peripheral
EDIV and Rand by the Peripheral
IRK by the Peripheral
BD_ADDR by the Peripheral
CSRK by the Peripheral
LTK by the Central
EDIV and Rand by the Central
IRK by the Central
BD_ADDR by the Central
CSRK by the Central
When using LE Secure Connections, the keys shall be distributed in the
following order:
IRK by the Peripheral
BD_ADDR by the Peripheral
CSRK by the Peripheral
IRK by the Central
BD_ADDR by the Central
CSRK by the Central
According to the Core 6.1 for commands used for key distribution "Key
Rejected" can be used:
'3.6.1. Key distribution and generation
A device may reject a distributed key by sending the Pairing Failed command
with the reason set to "Key Rejected".
Fixes:
|
||
|
Luiz Augusto von Dentz
|
6ec3185fbc |
Bluetooth: btintel: Check if controller is ISO capable on btintel_classify_pkt_type
Due to what seem to be a bug with variant version returned by some
firmwares the code may set hdev->classify_pkt_type with
btintel_classify_pkt_type when in fact the controller doesn't even
support ISO channels feature but may use the handle range expected from
a controllers that does causing the packets to be reclassified as ISO
causing several bugs.
To fix the above btintel_classify_pkt_type will attempt to check if the
controller really supports ISO channels and in case it doesn't don't
reclassify even if the handle range is considered to be ISO, this is
considered safer than trying to fix the specific controller/firmware
version as that could change over time and causing similar problems in
the future.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219553
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2100565
Link: https://github.com/StarLabsLtd/firmware/issues/180
Fixes:
|
||
|
Alessandro Gasbarroni
|
d85edab911 |
Bluetooth: hci_sync: fix connectable extended advertising when using static random address
Currently, the connectable flag used by the setup of an extended
advertising instance drives whether we require privacy when trying to pass
a random address to the advertising parameters (Own Address).
If privacy is not required, then it automatically falls back to using the
controller's public address. This can cause problems when using controllers
that do not have a public address set, but instead use a static random
address.
e.g. Assume a BLE controller that does not have a public address set.
The controller upon powering is set with a random static address by default
by the kernel.
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6
Address: E4:AF:26:D8:3E:3A (Static)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
Setting non-connectable extended advertisement parameters in bluetoothctl
mgmt
add-ext-adv-params -r 0x801 -x 0x802 -P 2M -g 1
correctly sets Own address type as Random
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036)
plen 25
...
Own address type: Random (0x01)
Setting connectable extended advertisement parameters in bluetoothctl mgmt
add-ext-adv-params -r 0x801 -x 0x802 -P 2M -g -c 1
mistakenly sets Own address type to Public (which causes to use Public
Address 00:00:00:00:00:00)
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036)
plen 25
...
Own address type: Public (0x00)
This causes either the controller to emit an Invalid Parameters error or to
mishandle the advertising.
This patch makes sure that we use the already set static random address
when requesting a connectable extended advertising when we don't require
privacy and our public address is not set (00:00:00:00:00:00).
Fixes:
|
||
|
Kuniyuki Iwashima
|
a0075accbf |
Bluetooth: Fix null-ptr-deref in l2cap_sock_resume_cb()
syzbot reported null-ptr-deref in l2cap_sock_resume_cb(). [0] l2cap_sock_resume_cb() has a similar problem that was fixed by commit |
||
|
Jakub Kicinski
|
dae7f9cbd1 |
Merge branch 'mptcp-fix-fallback-related-races'
Matthieu Baerts says: ==================== mptcp: fix fallback-related races This series contains 3 fixes somewhat related to various races we have while handling fallback. The root cause of the issues addressed here is that the check for "we can fallback to tcp now" and the related action are not atomic. That also applies to fallback due to MP_FAIL -- where the window race is even wider. Address the issue introducing an additional spinlock to bundle together all the relevant events, as per patch 1 and 2. These fixes can be backported up to v5.19 and v5.15. Note that mptcp_disconnect() unconditionally clears the fallback status (zeroing msk->flags) but don't touch the `allows_infinite_fallback` flag. Such issue is addressed in patch 3, and can be backported up to v5.17. ==================== Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-0-391aff963322@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Paolo Abeni
|
da9b2fc7b7 |
mptcp: reset fallback status gracefully at disconnect() time
mptcp_disconnect() clears the fallback bit unconditionally, without
touching the associated flags.
The bit clear is safe, as no fallback operation can race with that --
all subflow are already in TCP_CLOSE status thanks to the previous
FASTCLOSE -- but we need to consistently reset all the fallback related
status.
Also acquire the relevant lock, to avoid fouling static analyzers.
Fixes:
|
||
|
Paolo Abeni
|
def5b7b264 |
mptcp: plug races between subflow fail and subflow creation
We have races similar to the one addressed by the previous patch between
subflow failing and additional subflow creation. They are just harder to
trigger.
The solution is similar. Use a separate flag to track the condition
'socket state prevent any additional subflow creation' protected by the
fallback lock.
The socket fallback makes such flag true, and also receiving or sending
an MP_FAIL option.
The field 'allow_infinite_fallback' is now always touched under the
relevant lock, we can drop the ONCE annotation on write.
Fixes:
|
||
|
Paolo Abeni
|
f8a1d9b18c |
mptcp: make fallback action and fallback decision atomic
Syzkaller reported the following splat:
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 __mptcp_do_fallback net/mptcp/protocol.h:1223 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_do_fallback net/mptcp/protocol.h:1244 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 check_fully_established net/mptcp/options.c:982 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153
Modules linked in:
CPU: 1 UID: 0 PID: 7704 Comm: syz.3.1419 Not tainted 6.16.0-rc3-gbd5ce2324dba #20 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__mptcp_do_fallback net/mptcp/protocol.h:1223 [inline]
RIP: 0010:mptcp_do_fallback net/mptcp/protocol.h:1244 [inline]
RIP: 0010:check_fully_established net/mptcp/options.c:982 [inline]
RIP: 0010:mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153
Code: 24 18 e8 bb 2a 00 fd e9 1b df ff ff e8 b1 21 0f 00 e8 ec 5f c4 fc 44 0f b7 ac 24 b0 00 00 00 e9 54 f1 ff ff e8 d9 5f c4 fc 90 <0f> 0b 90 e9 b8 f4 ff ff e8 8b 2a 00 fd e9 8d e6 ff ff e8 81 2a 00
RSP: 0018:ffff8880a3f08448 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8880180a8000 RCX: ffffffff84afcf45
RDX: ffff888090223700 RSI: ffffffff84afdaa7 RDI: 0000000000000001
RBP: ffff888017955780 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8880180a8910 R14: ffff8880a3e9d058 R15: 0000000000000000
FS: 00005555791b8500(0000) GS:ffff88811c495000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000110c2800b7 CR3: 0000000058e44000 CR4: 0000000000350ef0
Call Trace:
<IRQ>
tcp_reset+0x26f/0x2b0 net/ipv4/tcp_input.c:4432
tcp_validate_incoming+0x1057/0x1b60 net/ipv4/tcp_input.c:5975
tcp_rcv_established+0x5b5/0x21f0 net/ipv4/tcp_input.c:6166
tcp_v4_do_rcv+0x5dc/0xa70 net/ipv4/tcp_ipv4.c:1925
tcp_v4_rcv+0x3473/0x44a0 net/ipv4/tcp_ipv4.c:2363
ip_protocol_deliver_rcu+0xba/0x480 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2f1/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:317 [inline]
NF_HOOK include/linux/netfilter.h:311 [inline]
ip_local_deliver+0x1be/0x560 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:469 [inline]
ip_rcv_finish net/ipv4/ip_input.c:447 [inline]
NF_HOOK include/linux/netfilter.h:317 [inline]
NF_HOOK include/linux/netfilter.h:311 [inline]
ip_rcv+0x514/0x810 net/ipv4/ip_input.c:567
__netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5975
__netif_receive_skb+0x1f/0x120 net/core/dev.c:6088
process_backlog+0x301/0x1360 net/core/dev.c:6440
__napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7453
napi_poll net/core/dev.c:7517 [inline]
net_rx_action+0xb44/0x1010 net/core/dev.c:7644
handle_softirqs+0x1d0/0x770 kernel/softirq.c:579
do_softirq+0x3f/0x90 kernel/softirq.c:480
</IRQ>
<TASK>
__local_bh_enable_ip+0xed/0x110 kernel/softirq.c:407
local_bh_enable include/linux/bottom_half.h:33 [inline]
inet_csk_listen_stop+0x2c5/0x1070 net/ipv4/inet_connection_sock.c:1524
mptcp_check_listen_stop.part.0+0x1cc/0x220 net/mptcp/protocol.c:2985
mptcp_check_listen_stop net/mptcp/mib.h:118 [inline]
__mptcp_close+0x9b9/0xbd0 net/mptcp/protocol.c:3000
mptcp_close+0x2f/0x140 net/mptcp/protocol.c:3066
inet_release+0xed/0x200 net/ipv4/af_inet.c:435
inet6_release+0x4f/0x70 net/ipv6/af_inet6.c:487
__sock_release+0xb3/0x270 net/socket.c:649
sock_close+0x1c/0x30 net/socket.c:1439
__fput+0x402/0xb70 fs/file_table.c:465
task_work_run+0x150/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xd4/0xe0 kernel/entry/common.c:114
exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline]
do_syscall_64+0x245/0x360 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc92f8a36ad
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcf52802d8 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4
RAX: 0000000000000000 RBX: 00007ffcf52803a8 RCX: 00007fc92f8a36ad
RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003
RBP: 00007fc92fae7ba0 R08: 0000000000000001 R09: 0000002800000000
R10: 00007fc92f700000 R11: 0000000000000246 R12: 00007fc92fae5fac
R13: 00007fc92fae5fa0 R14: 0000000000026d00 R15: 0000000000026c51
</TASK>
irq event stamp: 4068
hardirqs last enabled at (4076): [<ffffffff81544816>] __up_console_sem+0x76/0x80 kernel/printk/printk.c:344
hardirqs last disabled at (4085): [<ffffffff815447fb>] __up_console_sem+0x5b/0x80 kernel/printk/printk.c:342
softirqs last enabled at (3096): [<ffffffff840e1be0>] local_bh_enable include/linux/bottom_half.h:33 [inline]
softirqs last enabled at (3096): [<ffffffff840e1be0>] inet_csk_listen_stop+0x2c0/0x1070 net/ipv4/inet_connection_sock.c:1524
softirqs last disabled at (3097): [<ffffffff813b6b9f>] do_softirq+0x3f/0x90 kernel/softirq.c:480
Since we need to track the 'fallback is possible' condition and the
fallback status separately, there are a few possible races open between
the check and the actual fallback action.
Add a spinlock to protect the fallback related information and use it
close all the possible related races. While at it also remove the
too-early clearing of allow_infinite_fallback in __mptcp_subflow_connect():
the field will be correctly cleared by subflow_finish_connect() if/when
the connection will complete successfully.
If fallback is not possible, as per RFC, reset the current subflow.
Since the fallback operation can now fail and return value should be
checked, rename the helper accordingly.
Fixes:
|
||
|
Jiawen Wu
|
2b30a3d1ec |
net: libwx: fix multicast packets received count
Multicast good packets received by PF rings that pass ethternet MAC
address filtering are counted for rtnl_link_stats64.multicast. The
counter is not cleared on read. Fix the duplicate counting on updating
statistics.
Fixes:
|
||
|
Jakub Kicinski
|
d4f9b88479 |
Merge branch 'fix-rx-fatal-errors'
Jiawen Wu says: ==================== Fix Rx fatal errors There are some fatal errors on the Rx NAPI path, which can cause the kernel to crash. Fix known issues and potential risks. The part of the patches has been mentioned before[1]. [1]: https://lore.kernel.org/all/C8A23A11DB646E60+20250630094102.22265-1-jiawenwu@trustnetic.com/ v1: https://lore.kernel.org/20250709064025.19436-1-jiawenwu@trustnetic.com ==================== Link: https://patch.msgid.link/20250714024755.17512-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jiawen Wu
|
d992ed7e1b |
net: libwx: properly reset Rx ring descriptor
When device reset is triggered by feature changes such as toggling Rx
VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The
hardware descriptor ring may retain stale values from previous sessions.
And only set the length to 0 in rx_desc[0] would result in building
malformed SKBs. Fix it to ensure a clean slate after device reset.
[ 549.186435] [ C16] ------------[ cut here ]------------
[ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814!
[ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary)
[ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510
[ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8
[ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282
[ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2
[ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40
[ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e
[ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200
[ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2
[ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000
[ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0
[ 549.186505] [ C16] PKRU: 55555554
[ 549.186507] [ C16] Call Trace:
[ 549.186510] [ C16] <IRQ>
[ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186517] [ C16] __skb_pad+0xc7/0xf0
[ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx]
[ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx]
[ 549.186540] [ C16] __napi_poll+0x28/0x190
[ 549.186544] [ C16] net_rx_action+0x301/0x3f0
[ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50
[ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160
[ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0
[ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130
[ 549.186572] [ C16] common_interrupt+0xb8/0xd0
[ 549.186576] [ C16] </IRQ>
[ 549.186577] [ C16] <TASK>
[ 549.186579] [ C16] asm_common_interrupt+0x22/0x40
[ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246
[ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000
[ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3
[ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000
[ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40
[ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000
[ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420
[ 549.186605] [ C16] cpuidle_enter+0x29/0x40
[ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170
[ 549.186613] [ C16] do_idle+0x7a/0xc0
[ 549.186616] [ C16] cpu_startup_entry+0x25/0x30
[ 549.186618] [ C16] start_secondary+0x117/0x140
[ 549.186623] [ C16] common_startup_64+0x13e/0x148
[ 549.186628] [ C16] </TASK>
Fixes:
|
||
|
Jiawen Wu
|
5fd77cc6bd |
net: libwx: fix the using of Rx buffer DMA
The wx_rx_buffer structure contained two DMA address fields: 'dma' and
'page_dma'. However, only 'page_dma' was actually initialized and used
to program the Rx descriptor. But 'dma' was uninitialized and used in
some paths.
This could lead to undefined behavior, including DMA errors or
use-after-free, if the uninitialized 'dma' was used. Althrough such
error has not yet occurred, it is worth fixing in the code.
Fixes:
|
||
|
Jiawen Wu
|
1b7e585c04 |
net: libwx: remove duplicate page_pool_put_full_page()
page_pool_put_full_page() should only be invoked when freeing Rx buffers
or building a skb if the size is too short. At other times, the pages
need to be reused. So remove the redundant page put. In the original
code, double free pages cause kernel panic:
[ 876.949834] __irq_exit_rcu+0xc7/0x130
[ 876.949836] common_interrupt+0xb8/0xd0
[ 876.949838] </IRQ>
[ 876.949838] <TASK>
[ 876.949840] asm_common_interrupt+0x22/0x40
[ 876.949841] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 876.949843] Code: 00 00 e8 d1 1d 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 cd fc 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 876.949844] RSP: 0018:ffffaa7340267e78 EFLAGS: 00000246
[ 876.949845] RAX: ffff9e3f135be000 RBX: 0000000000000002 RCX: 0000000000000000
[ 876.949846] RDX: 000000cc2dc4cb7c RSI: ffffffff89ee49ae RDI: ffffffff89ef9f9e
[ 876.949847] RBP: ffff9e378f940800 R08: 0000000000000002 R09: 00000000000000ed
[ 876.949848] R10: 000000000000afc8 R11: ffff9e3e9e5a9b6c R12: ffffffff8a6d8580
[ 876.949849] R13: 000000cc2dc4cb7c R14: 0000000000000002 R15: 0000000000000000
[ 876.949852] ? cpuidle_enter_state+0xb3/0x420
[ 876.949855] cpuidle_enter+0x29/0x40
[ 876.949857] cpuidle_idle_call+0xfd/0x170
[ 876.949859] do_idle+0x7a/0xc0
[ 876.949861] cpu_startup_entry+0x25/0x30
[ 876.949862] start_secondary+0x117/0x140
[ 876.949864] common_startup_64+0x13e/0x148
[ 876.949867] </TASK>
[ 876.949868] ---[ end trace 0000000000000000 ]---
[ 876.949869] ------------[ cut here ]------------
[ 876.949870] list_del corruption, ffffead40445a348->next is NULL
[ 876.949873] WARNING: CPU: 14 PID: 0 at lib/list_debug.c:52 __list_del_entry_valid_or_report+0x67/0x120
[ 876.949875] Modules linked in: snd_hrtimer(E) bnep(E) binfmt_misc(E) amdgpu(E) squashfs(E) vfat(E) loop(E) fat(E) amd_atl(E) snd_hda_codec_realtek(E) intel_rapl_msr(E) snd_hda_codec_generic(E) intel_rapl_common(E) snd_hda_scodec_component(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) edac_mce_amd(E) snd_intel_dspcfg(E) snd_hda_codec(E) snd_hda_core(E) amdxcp(E) kvm_amd(E) snd_hwdep(E) gpu_sched(E) drm_panel_backlight_quirks(E) cec(E) snd_pcm(E) drm_buddy(E) snd_seq_dummy(E) drm_ttm_helper(E) btusb(E) kvm(E) snd_seq_oss(E) btrtl(E) ttm(E) btintel(E) snd_seq_midi(E) btbcm(E) drm_exec(E) snd_seq_midi_event(E) i2c_algo_bit(E) snd_rawmidi(E) bluetooth(E) drm_suballoc_helper(E) irqbypass(E) snd_seq(E) ghash_clmulni_intel(E) sha512_ssse3(E) drm_display_helper(E) aesni_intel(E) snd_seq_device(E) rfkill(E) snd_timer(E) gf128mul(E) drm_client_lib(E) drm_kms_helper(E) snd(E) i2c_piix4(E) joydev(E) soundcore(E) wmi_bmof(E) ccp(E) k10temp(E) i2c_smbus(E) gpio_amdpt(E) i2c_designware_platform(E) gpio_generic(E) sg(E)
[ 876.949914] i2c_designware_core(E) sch_fq_codel(E) parport_pc(E) drm(E) ppdev(E) lp(E) parport(E) fuse(E) nfnetlink(E) ip_tables(E) ext4 crc16 mbcache jbd2 sd_mod sfp mdio_i2c i2c_core txgbe ahci ngbe pcs_xpcs libahci libwx r8169 phylink libata realtek ptp pps_core video wmi
[ 876.949933] CPU: 14 UID: 0 PID: 0 Comm: swapper/14 Kdump: loaded Tainted: G W E 6.16.0-rc2+ #20 PREEMPT(voluntary)
[ 876.949935] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE
[ 876.949936] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 876.949936] RIP: 0010:__list_del_entry_valid_or_report+0x67/0x120
[ 876.949938] Code: 00 00 00 48 39 7d 08 0f 85 a6 00 00 00 5b b8 01 00 00 00 5d 41 5c e9 73 0d 93 ff 48 89 fe 48 c7 c7 a0 31 e8 89 e8 59 7c b3 ff <0f> 0b 31 c0 5b 5d 41 5c e9 57 0d 93 ff 48 89 fe 48 c7 c7 c8 31 e8
[ 876.949940] RSP: 0018:ffffaa73405d0c60 EFLAGS: 00010282
[ 876.949941] RAX: 0000000000000000 RBX: ffffead40445a348 RCX: 0000000000000000
[ 876.949942] RDX: 0000000000000105 RSI: 0000000000000001 RDI: 00000000ffffffff
[ 876.949943] RBP: 0000000000000000 R08: 000000010006dfde R09: ffffffff8a47d150
[ 876.949944] R10: ffffffff8a47d150 R11: 0000000000000003 R12: dead000000000122
[ 876.949945] R13: ffff9e3e9e5af700 R14: ffffead40445a348 R15: ffff9e3e9e5af720
[ 876.949946] FS: 0000000000000000(0000) GS:ffff9e3f135be000(0000) knlGS:0000000000000000
[ 876.949947] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 876.949948] CR2: 00007fa58b480048 CR3: 0000000156724000 CR4: 0000000000750ef0
[ 876.949949] PKRU: 55555554
[ 876.949950] Call Trace:
[ 876.949951] <IRQ>
[ 876.949952] __rmqueue_pcplist+0x53/0x2c0
[ 876.949955] alloc_pages_bulk_noprof+0x2e0/0x660
[ 876.949958] __page_pool_alloc_pages_slow+0xa9/0x400
[ 876.949961] page_pool_alloc_pages+0xa/0x20
[ 876.949963] wx_alloc_rx_buffers+0xd7/0x110 [libwx]
[ 876.949967] wx_clean_rx_irq+0x262/0x430 [libwx]
[ 876.949971] wx_poll+0x92/0x130 [libwx]
[ 876.949975] __napi_poll+0x28/0x190
[ 876.949977] net_rx_action+0x301/0x3f0
[ 876.949980] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949981] ? profile_tick+0x30/0x70
[ 876.949983] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949984] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949986] ? timerqueue_add+0xa3/0xc0
[ 876.949988] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949989] ? __raise_softirq_irqoff+0x16/0x70
[ 876.949991] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949993] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949994] ? wx_msix_clean_rings+0x41/0x50 [libwx]
[ 876.949998] handle_softirqs+0xf9/0x2c0
Fixes:
|
||
|
Markus Blöchl
|
e6176ab107 |
net: stmmac: intel: populate entire system_counterval_t in get_time_fn() callback
get_time_fn() callback implementations are expected to fill out the
entire system_counterval_t struct as it may be initially uninitialized.
This broke with the removal of convert_art_to_tsc() helper functions
which left use_nsecs uninitialized.
Initially assign the entire struct with default values.
Fixes:
|
||
|
Jakub Kicinski
|
ae2256f967 |
linux-can-fixes-for-6.16-20250715
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmh2KYETHG1rbEBwZW5n dXRyb25peC5kZQAKCRAMdGXf+ZCRnDU8B/4iD8EZa3ZPBo0ZIpeCSw1+xL/4oDec ZkSbgL01ufOFJn3PtK7OrU85yhLcAIsG1AhjzqrFtj/lIG/XkNZlasegva/R2k/o Q1TOY4I1NozeLgzwHL1352aYQ0L5oNq4gwe3Ue4aBM7x9Lc+lCqmtFMmi0+XprUE SJJ6FSMYbv4+yZknEnAjtIgv/QmiEQAfEpmJOIyyJai1Y7oqV7z+Ti0feLnb/uVP NA/VgML/Ab5pnNG2Ykh8+65sqiNI3jYj3BrD7vdZ0mCtj70MzlHLztpKEY62x4gJ Fn31QfbwsvtSCSCgxNEH5i+mX1u5c63dMhIntZhfhfYD4/tCkIntNL1i =9Yue -----END PGP SIGNATURE----- Merge tag 'linux-can-fixes-for-6.16-20250715' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2025-07-15 Brett Werling's patch for the tcan4x5x glue code driver fixes the detection of chips which are held in reset/sleep and must be woken up by GPIO prior to communication. * tag 'linux-can-fixes-for-6.16-20250715' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: tcan4x5x: fix reset gpio usage during probe ==================== Link: https://patch.msgid.link/20250715101625.3202690-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Oliver Neukum
|
4c4ca3c461 |
usb: net: sierra: check for no status endpoint
The driver checks for having three endpoints and
having bulk in and out endpoints, but not that
the third endpoint is interrupt input.
Rectify the omission.
Reported-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/686d5a9f.050a0220.1ffab7.0017.GAE@google.com/
Tested-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com
Fixes:
|
||
|
Paolo Abeni
|
0e9418961f |
selftests: net: increase inter-packet timeout in udpgro.sh
The mentioned test is not very stable when running on top of
debug kernel build. Increase the inter-packet timeout to allow
more slack in such environments.
Fixes:
|
||
|
Brett Werling
|
0f97a7588d |
can: tcan4x5x: fix reset gpio usage during probe
Fixes reset GPIO usage during probe by ensuring we retrieve the GPIO and
take the device out of reset (if it defaults to being in reset) before
we attempt to communicate with the device. This is achieved by moving
the call to tcan4x5x_get_gpios() before tcan4x5x_find_version() and
avoiding any device communication while getting the GPIOs. Once we
determine the version, we can then take the knowledge of which GPIOs we
obtained and use it to decide whether we need to disable the wake or
state pin functions within the device.
This change is necessary in a situation where the reset GPIO is pulled
high externally before the CPU takes control of it, meaning we need to
explicitly bring the device out of reset before we can start
communicating with it at all.
This also has the effect of fixing an issue where a reset of the device
would occur after having called tcan4x5x_disable_wake(), making the
original behavior not actually disable the wake. This patch should now
disable wake or state pin functions well after the reset occurs.
Signed-off-by: Brett Werling <brett.werling@garmin.com>
Link: https://patch.msgid.link/20250711141728.1826073-1-brett.werling@garmin.com
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Fixes:
|
||
|
Sean Anderson
|
f0f2b992d8 |
net: phy: Don't register LEDs for genphy
If a PHY has no driver, the genphy driver is probed/removed directly in
phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the
LEDs will be (un)registered when probing/removing the genphy driver.
This could occur if the leds are for a non-generic driver that isn't
loaded for whatever reason. Synchronously removing the PHY device in
phy_detach leads to the following deadlock:
rtnl_lock()
ndo_close()
...
phy_detach()
phy_remove()
phy_leds_unregister()
led_classdev_unregister()
led_trigger_set()
netdev_trigger_deactivate()
unregister_netdevice_notifier()
rtnl_lock()
There is a corresponding deadlock on the open/register side of things
(and that one is reported by lockdep), but it requires a race while this
one is deterministic.
Generic PHYs do not support LEDs anyway, so don't bother registering
them.
Fixes:
|
||
|
Victor Nogueira
|
e18f348632 |
selftests/tc-testing: Create test cases for adding qdiscs to invalid qdisc parents
As described in a previous commit [1], Lion's patch [2] revealed an ancient bug in the qdisc API. Whenever a user tries to add a qdisc to an invalid parent (not a class, root, or ingress qdisc), the qdisc API will detect this after qdisc_create is called. Some qdiscs (like fq_codel, pie, and sfq) call functions (on their init callback) which assume the parent is valid, so qdisc_create itself may have caused a NULL pointer dereference in such cases. This commit creates 3 TDC tests that attempt to add fq_codel, pie and sfq qdiscs to invalid parents - Attempts to add an fq_codel qdisc to an hhf qdisc parent - Attempts to add a pie qdisc to a drr qdisc parent - Attempts to add an sfq qdisc to an inexistent hfsc classid (which would belong to a valid hfsc qdisc) [1] https://lore.kernel.org/all/20250707210801.372995-1-victor@mojatatu.com/ [2] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/ Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250712145035.705156-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Kuniyuki Iwashima
|
60ada4fe64 |
smc: Fix various oops due to inet_sock type confusion.
syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while
freeing inet_sk(sk)->inet_opt.
The address was freed multiple times even though it was read-only memory.
cipso_v4_sock_setattr() did nothing wrong, and the root cause was type
confusion.
The cited commit made it possible to create smc_sock as an INET socket.
The issue is that struct smc_sock does not have struct inet_sock as the
first member but hijacks AF_INET and AF_INET6 sk_family, which confuses
various places.
In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(),
which is an address of a function in the text segment.
$ pahole -C inet_sock vmlinux
struct inet_sock {
...
struct ip_options_rcu * inet_opt; /* 784 8 */
$ pahole -C smc_sock vmlinux
struct smc_sock {
...
void (*clcsk_data_ready)(struct sock *); /* 784 8 */
The same issue for another field was reported before. [2][3]
At that time, an ugly hack was suggested [4], but it makes both INET
and SMC code error-prone and hard to change.
Also, yet another variant was fixed by a hacky commit
|
||
|
Kuniyuki Iwashima
|
b640daa282 |
rpl: Fix use-after-free in rpl_do_srh_inline().
Running lwt_dst_cache_ref_loop.sh in selftest with KASAN triggers
the splat below [0].
rpl_do_srh_inline() fetches ipv6_hdr(skb) and accesses it after
skb_cow_head(), which is illegal as the header could be freed then.
Let's fix it by making oldhdr to a local struct instead of a pointer.
[0]:
[root@fedora net]# ./lwt_dst_cache_ref_loop.sh
...
TEST: rpl (input)
[ 57.631529] ==================================================================
BUG: KASAN: slab-use-after-free in rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:174)
Read of size 40 at addr ffff888122bf96d8 by task ping6/1543
CPU: 50 UID: 0 PID: 1543 Comm: ping6 Not tainted 6.16.0-rc5-01302-gfadd1e6231b1 #23 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:409 mm/kasan/report.c:521)
kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636)
kasan_check_range (mm/kasan/generic.c:175 (discriminator 1) mm/kasan/generic.c:189 (discriminator 1))
__asan_memmove (mm/kasan/shadow.c:94 (discriminator 2))
rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:174)
rpl_input (net/ipv6/rpl_iptunnel.c:201 net/ipv6/rpl_iptunnel.c:282)
lwtunnel_input (net/core/lwtunnel.c:459)
ipv6_rcv (./include/net/dst.h:471 (discriminator 1) ./include/net/dst.h:469 (discriminator 1) net/ipv6/ip6_input.c:79 (discriminator 1) ./include/linux/netfilter.h:317 (discriminator 1) ./include/linux/netfilter.h:311 (discriminator 1) net/ipv6/ip6_input.c:311 (discriminator 1))
__netif_receive_skb_one_core (net/core/dev.c:5967)
process_backlog (./include/linux/rcupdate.h:869 net/core/dev.c:6440)
__napi_poll.constprop.0 (net/core/dev.c:7452)
net_rx_action (net/core/dev.c:7518 net/core/dev.c:7643)
handle_softirqs (kernel/softirq.c:579)
do_softirq (kernel/softirq.c:480 (discriminator 20))
</IRQ>
<TASK>
__local_bh_enable_ip (kernel/softirq.c:407)
__dev_queue_xmit (net/core/dev.c:4740)
ip6_finish_output2 (./include/linux/netdevice.h:3358 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv6/ip6_output.c:141)
ip6_finish_output (net/ipv6/ip6_output.c:215 net/ipv6/ip6_output.c:226)
ip6_output (./include/linux/netfilter.h:306 net/ipv6/ip6_output.c:248)
ip6_send_skb (net/ipv6/ip6_output.c:1983)
rawv6_sendmsg (net/ipv6/raw.c:588 net/ipv6/raw.c:918)
__sys_sendto (net/socket.c:714 (discriminator 1) net/socket.c:729 (discriminator 1) net/socket.c:2228 (discriminator 1))
__x64_sys_sendto (net/socket.c:2231)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f68cffb2a06
Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
RSP: 002b:00007ffefb7c53d0 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000564cd69f10a0 RCX: 00007f68cffb2a06
RDX: 0000000000000040 RSI: 0000564cd69f10a4 RDI: 0000000000000003
RBP: 00007ffefb7c53f0 R08: 0000564cd6a032ac R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000202 R12: 0000564cd69f10a4
R13: 0000000000000040 R14: 00007ffefb7c66e0 R15: 0000564cd69f10a0
</TASK>
Allocated by task 1543:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
__kasan_slab_alloc (mm/kasan/common.c:319 mm/kasan/common.c:345)
kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249)
kmalloc_reserve (net/core/skbuff.c:581 (discriminator 88))
__alloc_skb (net/core/skbuff.c:669)
__ip6_append_data (net/ipv6/ip6_output.c:1672 (discriminator 1))
ip6_append_data (net/ipv6/ip6_output.c:1859)
rawv6_sendmsg (net/ipv6/raw.c:911)
__sys_sendto (net/socket.c:714 (discriminator 1) net/socket.c:729 (discriminator 1) net/socket.c:2228 (discriminator 1))
__x64_sys_sendto (net/socket.c:2231)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 1543:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
kasan_save_free_info (mm/kasan/generic.c:579 (discriminator 1))
__kasan_slab_free (mm/kasan/common.c:271)
kmem_cache_free (mm/slub.c:4643 (discriminator 3) mm/slub.c:4745 (discriminator 3))
pskb_expand_head (net/core/skbuff.c:2274)
rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:158 (discriminator 1))
rpl_input (net/ipv6/rpl_iptunnel.c:201 net/ipv6/rpl_iptunnel.c:282)
lwtunnel_input (net/core/lwtunnel.c:459)
ipv6_rcv (./include/net/dst.h:471 (discriminator 1) ./include/net/dst.h:469 (discriminator 1) net/ipv6/ip6_input.c:79 (discriminator 1) ./include/linux/netfilter.h:317 (discriminator 1) ./include/linux/netfilter.h:311 (discriminator 1) net/ipv6/ip6_input.c:311 (discriminator 1))
__netif_receive_skb_one_core (net/core/dev.c:5967)
process_backlog (./include/linux/rcupdate.h:869 net/core/dev.c:6440)
__napi_poll.constprop.0 (net/core/dev.c:7452)
net_rx_action (net/core/dev.c:7518 net/core/dev.c:7643)
handle_softirqs (kernel/softirq.c:579)
do_softirq (kernel/softirq.c:480 (discriminator 20))
__local_bh_enable_ip (kernel/softirq.c:407)
__dev_queue_xmit (net/core/dev.c:4740)
ip6_finish_output2 (./include/linux/netdevice.h:3358 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv6/ip6_output.c:141)
ip6_finish_output (net/ipv6/ip6_output.c:215 net/ipv6/ip6_output.c:226)
ip6_output (./include/linux/netfilter.h:306 net/ipv6/ip6_output.c:248)
ip6_send_skb (net/ipv6/ip6_output.c:1983)
rawv6_sendmsg (net/ipv6/raw.c:588 net/ipv6/raw.c:918)
__sys_sendto (net/socket.c:714 (discriminator 1) net/socket.c:729 (discriminator 1) net/socket.c:2228 (discriminator 1))
__x64_sys_sendto (net/socket.c:2231)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
The buggy address belongs to the object at ffff888122bf96c0
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 24 bytes inside of
freed 704-byte region [ffff888122bf96c0, ffff888122bf9980)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x122bf8
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x200000000000040(head|node=0|zone=2)
page_type: f5(slab)
raw: 0200000000000040 ffff888101fc0a00 ffffea000464dc00 0000000000000002
raw: 0000000000000000 0000000080270027 00000000f5000000 0000000000000000
head: 0200000000000040 ffff888101fc0a00 ffffea000464dc00 0000000000000002
head: 0000000000000000 0000000080270027 00000000f5000000 0000000000000000
head: 0200000000000003 ffffea00048afe01 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888122bf9580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888122bf9600: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888122bf9680: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
^
ffff888122bf9700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888122bf9780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes:
|
||
|
David S. Miller
|
a059ef8e88 |
Merge branch 'tpacket_snd-bugs' into main
Yun Lu says: ==================== fix two issues and optimize code on tpacket_snd() This series fix two issues and optimize the code on tpacket_snd(): 1, fix the SO_SNDTIMEO constraint not effective due to the changes in commit 581073f626e3; 2, fix a soft lockup issue on a specific edge case, and also optimize the loop logic to be clearer and more obvious; --- Changes in v5: - Still combine fix and optimization together, change to while(1). Thanks: Willem de Bruijn. - Link to v4: https://lore.kernel.org/all/20250710102639.280932-1-luyun_611@163.com/ Changes in v4: - Fix a typo and add the missing semicolon. Thanks: Simon Horman. - Split the second patch into two, one to fix, another to optimize. Thanks: Willem de Bruijn - Link to v3: https://lore.kernel.org/all/20250709095653.62469-1-luyun_611@163.com/ Changes in v3: - Split in two different patches. - Simplify the code and reuse ph to continue. Thanks: Eric Dumazet. - Link to v2: https://lore.kernel.org/all/20250708020642.27838-1-luyun_611@163.com/ Changes in v2: - Add a Fixes tag. - Link to v1: https://lore.kernel.org/all/20250707081629.10344-1-luyun_611@163.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Yun Lu
|
55f0bfc037 |
af_packet: fix soft lockup issue caused by tpacket_snd()
When MSG_DONTWAIT is not set, the tpacket_snd operation will wait for
pending_refcnt to decrement to zero before returning. The pending_refcnt
is decremented by 1 when the skb->destructor function is called,
indicating that the skb has been successfully sent and needs to be
destroyed.
If an error occurs during this process, the tpacket_snd() function will
exit and return error, but pending_refcnt may not yet have decremented to
zero. Assuming the next send operation is executed immediately, but there
are no available frames to be sent in tx_ring (i.e., packet_current_frame
returns NULL), and skb is also NULL, the function will not execute
wait_for_completion_interruptible_timeout() to yield the CPU. Instead, it
will enter a do-while loop, waiting for pending_refcnt to be zero. Even
if the previous skb has completed transmission, the skb->destructor
function can only be invoked in the ksoftirqd thread (assuming NAPI
threading is enabled). When both the ksoftirqd thread and the tpacket_snd
operation happen to run on the same CPU, and the CPU trapped in the
do-while loop without yielding, the ksoftirqd thread will not get
scheduled to run. As a result, pending_refcnt will never be reduced to
zero, and the do-while loop cannot exit, eventually leading to a CPU soft
lockup issue.
In fact, skb is true for all but the first iterations of that loop, and
as long as pending_refcnt is not zero, even if incremented by a previous
call, wait_for_completion_interruptible_timeout() should be executed to
yield the CPU, allowing the ksoftirqd thread to be scheduled. Therefore,
the execution condition of this function should be modified to check if
pending_refcnt is not zero, instead of check skb.
- if (need_wait && skb) {
+ if (need_wait && packet_read_pending(&po->tx_ring)) {
As a result, the judgment conditions are duplicated with the end code of
the while loop, and packet_read_pending() is a very expensive function.
Actually, this loop can only exit when ph is NULL, so the loop condition
can be changed to while (1), and in the "ph = NULL" branch, if the
subsequent condition of if is not met, the loop can break directly. Now,
the loop logic remains the same as origin but is clearer and more obvious.
Fixes:
|
||
|
Yun Lu
|
c1ba3c0cbd |
af_packet: fix the SO_SNDTIMEO constraint not effective on tpacked_snd()
Due to the changes in commit |
||
|
Xiang Mei
|
5e28d5a3f7 |
net/sched: sch_qfq: Fix race condition on qfq_aggregate
A race condition can occur when 'agg' is modified in qfq_change_agg
(called during qfq_enqueue) while other threads access it
concurrently. For example, qfq_dump_class may trigger a NULL
dereference, and qfq_delete_class may cause a use-after-free.
This patch addresses the issue by:
1. Moved qfq_destroy_class into the critical section.
2. Added sch_tree_lock protection to qfq_dump_class and
qfq_dump_class_stats.
Fixes:
|
||
|
Alok Tiwari
|
7727ec1523 |
net: emaclite: Fix missing pointer increment in aligned_read()
Add missing post-increment operators for byte pointers in the
loop that copies remaining bytes in xemaclite_aligned_read().
Without the increment, the same byte was written repeatedly
to the destination.
This update aligns with xemaclite_aligned_write()
Fixes:
|
||
|
Linus Torvalds
|
c7979c3917 |
Big chunk of fixes for WiFi, Johannes says probably the last
for the release. The Netlink fixes (on top of the tree) restore
operation of iw (WiFi CLI) which uses sillily small recv buffer,
and is the reason for this "emergency PR". The GRE multicast
fix also stands out among the user-visible regressions.
Current release - fix to a fix:
- netlink: make sure we always allow at least one skb to be queued,
even if the recvbuf is (mis)configured to be tiny
Previous releases - regressions:
- gre: fix IPv6 multicast route creation
Previous releases - always broken:
- wifi: prevent A-MSDU attacks in mesh networks
- wifi: cfg80211: fix S1G beacon head validation and detection
- wifi: mac80211:
- always clear frame buffer to prevent stack leak in cases which
hit a WARN()
- fix monitor interface in device restart
- wifi: mwifiex: discard erroneous disassoc frames on STA interface
- wifi: mt76:
- prevent null-deref in mt7925_sta_set_decap_offload()
- add missing RCU annotations, and fix sleep in atomic
- fix decapsulation offload
- fixes for scanning
- phy: microchip: improve link establishment and reset handling
- eth: mlx5e: fix race between DIM disable and net_dim()
- bnxt_en: correct DMA unmap len for XDP_REDIRECT
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=R36B
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski
"Big chunk of fixes for WiFi, Johannes says probably the last for the
release.
The Netlink fixes (on top of the tree) restore operation of iw (WiFi
CLI) which uses sillily small recv buffer, and is the reason for this
'emergency PR'.
The GRE multicast fix also stands out among the user-visible
regressions.
Current release - fix to a fix:
- netlink: make sure we always allow at least one skb to be queued,
even if the recvbuf is (mis)configured to be tiny
Previous releases - regressions:
- gre: fix IPv6 multicast route creation
Previous releases - always broken:
- wifi: prevent A-MSDU attacks in mesh networks
- wifi: cfg80211: fix S1G beacon head validation and detection
- wifi: mac80211:
- always clear frame buffer to prevent stack leak in cases which
hit a WARN()
- fix monitor interface in device restart
- wifi: mwifiex: discard erroneous disassoc frames on STA interface
- wifi: mt76:
- prevent null-deref in mt7925_sta_set_decap_offload()
- add missing RCU annotations, and fix sleep in atomic
- fix decapsulation offload
- fixes for scanning
- phy: microchip: improve link establishment and reset handling
- eth: mlx5e: fix race between DIM disable and net_dim()
- bnxt_en: correct DMA unmap len for XDP_REDIRECT"
* tag 'net-6.16-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netlink: make sure we allow at least one dump skb
netlink: Fix rmem check in netlink_broadcast_deliver().
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
bnxt_en: Flush FW trace before copying to the coredump
bnxt_en: Fix DCB ETS validation
net: ll_temac: Fix missing tx_pending check in ethtools_set_ringparam()
net/mlx5e: Add new prio for promiscuous mode
net/mlx5e: Fix race between DIM disable and net_dim()
net/mlx5: Reset bw_share field when changing a node's parent
can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level
selftests: net: lib: fix shift count out of range
selftests: Add IPv6 multicast route generation tests for GRE devices.
gre: Fix IPv6 multicast route creation.
net: phy: microchip: limit 100M workaround to link-down events on LAN88xx
net: phy: microchip: Use genphy_soft_reset() to purge stale LPA bits
ibmvnic: Fix hardcoded NUM_RX_STATS/NUM_TX_STATS with dynamic sizeof
net: appletalk: Fix device refcount leak in atrtr_create()
netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto()
wifi: mac80211: add the virtual monitor after reconfig complete
wifi: mac80211: always initialize sdata::key_list
...
|
||
|
Linus Torvalds
|
5265593a28 |
gpio fixes for v6.16-rc6
- fix performance regression when setting values of multiple GPIO lines at once - make sure the GPIO OF xlate code doesn't end up passing an uninitialized local variable to GPIO core - update MAINTAINERS -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmhw/bMACgkQEacuoBRx 13K1rA/+NEm8lx+u6rcXDMMoKPkEB9LHh/nYDBVd505A6ifPw+Ro9iT2AuI5eePp S5EmyKB+Xmj0JSfqlYPzc90tZbw4xuKe1FoWuFlDgXKVjbL+lwGuGCUT7gORjNcO M7CjHd2pw3W4NEEOrYqRiVfS8N/ZI3tAgh17igfvt8C8F0pAGMoPTwA0QXPft6B1 g/zkK5RjsNfKd/Ma/Xz+3RWOGGPXeMgj+5A1EFqHF5jPLSf7kpJhk33mp28Qu0jA kWIsMDkOv3rFC7z89ygASr0a8VZTX8sGPmM5f9fqfr0vmzDI0mVPx5uGMWTkfGJp P7qZtn/rxV5XUJy8IIJcX/NMjm5jtu6rbRh74koFlIccRg5FVqHdgrrqmEgINPCL 4Mp9tQBZGrJqm/oHyLhT5RUIBm4GrYJ7QXuQZLklrXcgKh0CYwXZCyvaj4xXJXRb VPUldCvRauXQjVVHnjSIZxgovRnYfuj7n9/QfIAwoC26AqHYBQd19P1lcakQAJW8 JPyYpurP4KFG+20cE9qhaoMCSc/XpxkEKmSnD4ehd+rslIa4/XIORffrY7ONNTdT rwmWe0i4yT79RsreC3IQz4cVUYgfVHN0qC05ef81rvNVNY39xzgI/2fqBweXwubz j8Qxr4LGj/Le+lIdOehnr1TWu4l6DapzH0k21OhIZrG9PYLxuoo= =2TYC -----END PGP SIGNATURE----- Merge tag 'gpio-fixes-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix performance regression when setting values of multiple GPIO lines at once - make sure the GPIO OF xlate code doesn't end up passing an uninitialized local variable to GPIO core - update MAINTAINERS * tag 'gpio-fixes-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: MAINTAINERS: remove bouncing address for Nandor Han gpio: of: initialize local variable passed to the .of_xlate() callback gpiolib: fix performance regression when using gpio_chip_get_multiple() |
||
|
Linus Torvalds
|
87cf461cd3 |
Power management fix for 6.16-rc6
Fix a coding mistake in a previous fix related to system suspend and hibernation merged recently. -----BEGIN PGP SIGNATURE----- iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmhw2k4SHHJqd0Byand5 c29ja2kubmV0AAoJEO5fvZ0v1OO1RMYH/2qgZ/ocUAh8SL1y4rhj19O5J5ihZtZr Joh3zzUirX6bhxlmP9NHtLNBFNSma72rI2WUDPz9tA6RxfY/lV9CssXCIYN/w8YU xsso4X0cOulxTvR0hiS6DcXXtFg1X/OgV6w+Pv5t1pLvnsIcCRJtGFfGU909kSKV yap6DMbSiV3WC8B03Az3B6OUFBTaCuvt1ghs2I9F8O4b6/WuUrriYIAb3/MgWqQl YA/STieJWUo/hgpIvC09x/Raf8cztIqEi98DCADzhU43wZNR/t8ahlOnlIPK/ujh TnJHZdpVJUDS62reqaZHnQPxGnfltOPAqlWoM1azo8SCeouhEb1fOXM= =TocQ -----END PGP SIGNATURE----- Merge tag 'pm-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a coding mistake in a previous fix related to system suspend and hibernation merged recently" * tag 'pm-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: sleep: Call pm_restore_gfp_mask() after dpm_resume() |
||
|
Linus Torvalds
|
a0f8361c3c |
dma-mapping fix for Linux 6.16
- small fix relevant to arm64 server and custom CMA configuration (Feng Tang) -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaHCzdQAKCRCJp1EFxbsS RMrMAQDghOwKZqYuC27kJt5T7lgG47YCNE5em1v8WsTSvwQAugEA4AlWIpqQ34eI Es6ObfMt8Q9gArubFZ0ZDFtmZq9NpA0= =+z0i -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.16-2025-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux Pull dma-mapping fix from Marek Szyprowski: - small fix relevant to arm64 server and custom CMA configuration (Feng Tang) * tag 'dma-mapping-6.16-2025-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: dma-contiguous: hornor the cma address limit setup by user |
||
|
Jakub Kicinski
|
a215b57239 |
netlink: make sure we allow at least one dump skb
Commit under Fixes tightened up the memory accounting for Netlink
sockets. Looks like the accounting is too strict for some existing
use cases, Marek reported issues with nl80211 / WiFi iw CLI.
To reduce number of iterations Netlink dumps try to allocate
messages based on the size of the buffer passed to previous
recvmsg() calls. If user space uses a larger buffer in recvmsg()
than sk_rcvbuf we will allocate an skb we won't be able to queue.
Make sure we always allow at least one skb to be queued.
Same workaround is already present in netlink_attachskb().
Alternative would be to cap the allocation size to
rcvbuf - rmem_alloc
but as I said, the workaround is already present in other places.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/9794af18-4905-46c6-b12c-365ea2f05858@samsung.com
Fixes:
|
||
|
Kuniyuki Iwashima
|
a3c4a125ec |
netlink: Fix rmem check in netlink_broadcast_deliver().
We need to allow queuing at least one skb even when skb is
larger than sk->sk_rcvbuf.
The cited commit made a mistake while converting a condition
in netlink_broadcast_deliver().
Let's correct the rmem check for the allow-one-skb rule.
Fixes:
|
||
|
Jakub Kicinski
|
52c14ea7d7 |
Merge branch 'bnxt_en-3-bug-fixes'
Michael Chan says: ==================== bnxt_en: 3 bug fixes The first one fixes a possible failure when setting DCB ETS. The second one fixes the ethtool coredump (-W 2) not containing all the FW traces. The third one fixes the DMA unmap length when transmitting XDP_REDIRECT packets. ==================== Link: https://patch.msgid.link/20250710213938.1959625-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Somnath Kotur
|
3cdf199d47 |
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en]
Fixes:
|
||
|
Shruti Parab
|
100c08c89d |
bnxt_en: Flush FW trace before copying to the coredump
bnxt_fill_drv_seg_record() calls bnxt_dbg_hwrm_log_buffer_flush()
to flush the FW trace buffer. This needs to be done before we
call bnxt_copy_ctx_mem() to copy the trace data.
Without this fix, the coredump may not contain all the FW
traces.
Fixes:
|
||
|
Shravya KN
|
b74c2a2e9c |
bnxt_en: Fix DCB ETS validation
In bnxt_ets_validate(), the code incorrectly loops over all possible
traffic classes to check and add the ETS settings. Fix it to loop
over the configured traffic classes only.
The unconfigured traffic classes will default to TSA_ETS with 0
bandwidth. Looping over these unconfigured traffic classes may
cause the validation to fail and trigger this error message:
"rejecting ETS config starving a TC\n"
The .ieee_setets() will then fail.
Fixes:
|
||
|
Alok Tiwari
|
e81750b4e3 |
net: ll_temac: Fix missing tx_pending check in ethtools_set_ringparam()
The function ll_temac_ethtools_set_ringparam() incorrectly checked
rx_pending twice, once correctly for RX and once mistakenly in place
of tx_pending. This caused tx_pending to be left unchecked against
TX_BD_NUM_MAX.
As a result, invalid TX ring sizes may have been accepted or valid
ones wrongly rejected based on the RX limit, leading to potential
misconfiguration or unexpected results.
This patch corrects the condition to properly validate tx_pending.
Fixes:
|
||
|
Jakub Kicinski
|
5b81d59f02 |
Merge branch 'mlx5-misc-fixes-2025-07-10'
Tariq Toukan says: ==================== mlx5 misc fixes 2025-07-10 This small patchset provides misc bug fixes from the team to the mlx5 core and EN drivers. ==================== Link: https://patch.msgid.link/1752155624-24095-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jianbo Liu
|
4c9fce56fa |
net/mlx5e: Add new prio for promiscuous mode
An optimization for promiscuous mode adds a high-priority steering
table with a single catch-all rule to steer all traffic directly to
the TTC table.
However, a gap exists between the creation of this table and the
insertion of the catch-all rule. Packets arriving in this brief window
would miss as no rule was inserted yet, unnecessarily incrementing the
'rx_steer_missed_packets' counter and dropped.
This patch resolves the issue by introducing a new prio for this
table, placing it between MLX5E_TC_PRIO and MLX5E_NIC_PRIO. By doing
so, packets arriving during the window now fall through to the next
prio (at MLX5E_NIC_PRIO) instead of being dropped.
Fixes:
|
||
|
Carolina Jubran
|
eb41a264a3 |
net/mlx5e: Fix race between DIM disable and net_dim()
There's a race between disabling DIM and NAPI callbacks using the dim
pointer on the RQ or SQ.
If NAPI checks the DIM state bit and sees it still set, it assumes
`rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after
that check, the pointer might already be set to NULL, leading to a NULL
pointer dereference in net_dim().
Fix this by calling `synchronize_net()` before freeing the DIM context.
This ensures all in-progress NAPI callbacks are finished before the
pointer is cleared.
Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:net_dim+0x23/0x190
...
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? common_interrupt+0xf/0xa0
? sysvec_call_function_single+0xb/0x90
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? net_dim+0x23/0x190
? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core]
? sysvec_apic_timer_interrupt+0xb/0x90
mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core]
mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core]
? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core]
busy_poll_stop+0xa2/0x200
? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core]
? mlx5e_trigger_irq+0x130/0x130 [mlx5_core]
__napi_busy_loop+0x345/0x3b0
? sysvec_call_function_single+0xb/0x90
? asm_sysvec_call_function_single+0x16/0x20
? sysvec_apic_timer_interrupt+0xb/0x90
? pcpu_free_area+0x1e4/0x2e0
napi_busy_loop+0x11/0x20
xsk_recvmsg+0x10c/0x130
sock_recvmsg+0x44/0x70
__sys_recvfrom+0xbc/0x130
? __schedule+0x398/0x890
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
---[ end trace 0000000000000000 ]---
...
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes:
|
||
|
Carolina Jubran
|
f7b7646689 |
net/mlx5: Reset bw_share field when changing a node's parent
When changing a node's parent, its scheduling element is destroyed and
re-created with bw_share 0. However, the node's bw_share field was not
updated accordingly.
Set the node's bw_share to 0 after re-creation to keep the software
state in sync with the firmware configuration.
Fixes:
|
||
|
Jakub Kicinski
|
71b976db8c |
linux-can-fixes-for-6.16-20250711
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmhw5a0THG1rbEBwZW5n dXRyb25peC5kZQAKCRAMdGXf+ZCRnBPvB/9Lj49YdjGfrtq/2x34GWxmoVOKAjrQ qY/H6dMO5DZqBzoPTPc7+XzpipeOkLjB99X91do5IuyyHp9wp7t51PdzmxOlEgq+ 80zLB0hm6R6sTp6soCTAfhqsfdbd5BiXCzPyfxT10GQt8nUelkMje++FyRJVtXZI aabg3aLNCvczdkebiJQzic5HQUckw+A4mAb1VkOgg2J52bwmjuiSB6bHmzMkKhSA 77oOdthNPRiDqPk1pmGwghpgc6eQQMX+mMkXuUiJM2FR2b/LROcYwRUOVmFB6Gcp hLF7ti6hM9sVuEvixwn3co8M14cZhxWfRJLFN98qq57DZdOAb8Y0MdMW =odRG -----END PGP SIGNATURE----- Merge tag 'linux-can-fixes-for-6.16-20250711' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2025-07-11 Sean Nyekjaer's patch targets the m_can driver and demotes the "msg lost in rx" message to debug level to prevent flooding the kernel log with error messages. * tag 'linux-can-fixes-for-6.16-20250711' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level ==================== Link: https://patch.msgid.link/20250711102451.2828802-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Sean Nyekjaer
|
58805e9cbc |
can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level
Downgrade the "msg lost in rx" message to debug level, to prevent
flooding the kernel log with error messages.
Fixes:
|
||
|
Bartosz Golaszewski
|
edb471108c |
MAINTAINERS: remove bouncing address for Nandor Han
Nandor's address has been bouncing for some time now. Remove it from MAINTAINERS. The affected driver falls under the wider umbrella of GPIO modules. Link: https://lore.kernel.org/r/20250709071825.16212-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> |
||
|
Hangbin Liu
|
47c84997c6 |
selftests: net: lib: fix shift count out of range
I got the following warning when writing other tests:
+ handle_test_result_pass 'bond 802.3ad' '(lacp_active off)'
+ local 'test_name=bond 802.3ad'
+ shift
+ local 'opt_str=(lacp_active off)'
+ shift
+ log_test_result 'bond 802.3ad' '(lacp_active off)' ' OK '
+ local 'test_name=bond 802.3ad'
+ shift
+ local 'opt_str=(lacp_active off)'
+ shift
+ local 'result= OK '
+ shift
+ local retmsg=
+ shift
/net/tools/testing/selftests/net/forwarding/../lib.sh: line 315: shift: shift count out of range
This happens because an extra shift is executed even after all arguments
have been consumed. Remove the last shift in log_test_result() to avoid
this warning.
Fixes:
|
||
|
Jakub Kicinski
|
ce913b2292 |
Merge branch 'gre-fix-default-ipv6-multicast-route-creation'
Guillaume Nault says:
====================
gre: Fix default IPv6 multicast route creation.
When fixing IPv6 link-local address generation on GRE devices with
commit
|
||
|
Guillaume Nault
|
4d61a8a733 |
selftests: Add IPv6 multicast route generation tests for GRE devices.
The previous patch fixes a bug that prevented the creation of the default IPv6 multicast route (ff00::/8) for some GRE devices. Now let's extend the GRE IPv6 selftests to cover this case. Also, rename check_ipv6_ll_addr() to check_ipv6_device_config() and adapt comments and script output to take into account the fact that we're not limited to link-local address generation. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/65a89583bde3bf866a1922c2e5158e4d72c520e2.1752070620.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Guillaume Nault
|
4e914ef063 |
gre: Fix IPv6 multicast route creation.
Use addrconf_add_dev() instead of ipv6_find_idev() in addrconf_gre_config() so that we don't just get the inet6_dev, but also install the default ff00::/8 multicast route. Before commit |
||
|
Jakub Kicinski
|
2dfa4e3176 |
Merge branch 'net-phy-microchip-lan88xx-reliability-fixes'
Oleksij Rempel says: ==================== net: phy: microchip: LAN88xx reliability fixes This patch series improves the reliability of the Microchip LAN88xx PHYs, particularly in edge cases involving fixed link configurations or forced speed modes. Patch 1 assigns genphy_soft_reset() to the .soft_reset hook to ensure that stale link partner advertisement (LPA) bits are properly cleared during reconfiguration. Without this, outdated autonegotiation bits may remain visible in some parallel detection cases. Patch 2 restricts the 100 Mbps workaround (originally intended to handle cable length switching) to only run when the link transitions to the PHY_NOLINK state. This prevents repeated toggling that can confuse autonegotiating link partners such as the Intel i350, leading to unstable link cycles. Both patches were tested on a LAN7850 (with integrated LAN88xx PHY) against an Intel I350 NIC. The full test suite - autonegotiation, fixed link, and parallel detection - passed successfully. ==================== Link: https://patch.msgid.link/20250709130753.3994461-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |