With everything else ready, we can now switch to using the atomic
notifier for line state events which will allow us to notify user-space
about direction changes from atomic context.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-7-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to allow line state notifications to be emitted from atomic
context (for instance: from gpiod_direction_input/output()), we must
stop calling any sleeping functions in lineinfo_changed_notify(). To
that end let's use the new workqueue.
Let's atomically allocate small structures containing the required data
and fill it with information immediately upon being notified about the
change except for the pinctrl state which will be retrieved later from
process context. We can pretty reliably do this as pin functions are
typically set once per boot.
Let's make sure to bump the reference count of GPIO device and the GPIO
character device file descriptor to keep both alive until the event was
queued.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-6-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to prepare the line state notification mechanism for working in
atomic context as well, add a dedicated, high-priority, ordered
workqueue to GPIO device which will be used to queue the events fron any
context for them to be emitted always in process context.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-5-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to prepare gpio_desc_to_lineinfo() to being called from atomic
context, add a new argument - bool atomic - which, if set, indicates
that no sleeping functions must be called (currently: only
pinctrl_gpio_can_use_line()).
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-4-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This effectively reverts commits 9344e34e79 ("gpiolib: cdev: relocate
debounce_period_us from struct gpio_desc") and d8543cbaf9 ("gpiolib:
remove debounce_period_us from struct gpio_desc") and goes back to
storing the debounce period in microseconds in the GPIO descriptor
We're doing it in preparation for notifying the user-space about
in-kernel line config changes.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-3-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We don't need to guard the GPIO chip until its first dereference in
gpio_do_set_config().
First: change the prototype of gpio_do_set_config() to take the GPIO
line descriptor as argument, then move the gpio_chip protection into it
and drop it in two places where it's done too early.
This has the added benefit of making gpio_go_set_config() safe to use
from outside of this compilation unit without taking the gdev SRCU read
lock and will come in handy when we'll want to make it available to the
character device code.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-2-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We notify user-space about lines being requested from user-space or by
drivers calling gpiod_get() but not when drivers request their own lines
so add the missing call to gpiod_line_state_notify().
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-1-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use managed variants of gpiochip_add_data() and mutex_init() to drop a
label and lose a couple LOC.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241017121447.73754-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devm_clk_get_enabled() to drop the goto label from probe() and the
entire remove() callback. Drop platform_set_drvdata() as it's no longer
needed. Drop log noise on success.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241017123044.75531-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use managed helpers to drop the goto label from probe() and shrink the
remove() callback.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241017150835.105676-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is one last reference to rcu_momentary_dyntick_idle() after
commit 32a9f26e5e ("rcu: Rename rcu_momentary_dyntick_idle() into
rcu_momentary_eqs()")
Rename it for consistency.
Fixes: 32a9f26e5e ("rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()")
Signed-off-by: Srikar Dronamraju <srikar@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240925054619.568209-1-srikar@linux.ibm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This adds the ngpios property to MMIO GPIO. We restrict the
property to 1..63 since there is no point in 0 GPIO lines and
we support up to 64bits wide registers for now.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241017-gpio-ngpios-v2-1-cecfdb38d40e@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/gpio/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241016152435.38149-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devres to drop all goto labels from probe() and remove the driver
remove() callback. While at it: drop the unnecessary dev_info() message
as not only should the driver be quiet when successful, the message is
also wrong: the device was probed at this point, the driver had been
registered earlier.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241014092227.78886-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the managed variant of gpiochip_add_data() and remove the remove()
callback.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241014092909.90607-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The 'if !EXPERT' bit will work fine if it follows the 'bool "foobar"'
declaration. No need to have separate entries for it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241014110707.101320-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
All class functions used here take a const pointer to the class
structure. We can constify gpio_class.
While at it: remove a stray newline and use a tab in the struct
definition for consistency with the line above.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241014121831.106532-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Destroying the mutexes is done at the end of remove() so switching to
devres does not constitute a functional change. Use devm_mutex_init()
and remove repetitions of mutex_destroy().
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241008162416.85111-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver doesn't need to include of.h and use OF-specific interfaces.
Use generic property helpers instead.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241009162910.33477-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Instead of repeatedly dereferencing pdev, just store the address of the
embedded struct device in a local variable and use it instead for
improved readability.
While at it: rearrange variable declarations.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241009162910.33477-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There's no need to use the OF-specific variant to get the match data.
Switch to using device_get_match_data() and with that remove the of.h
include. Also remove of_irq.h as none of its interfaces is used here and
order the includes in alphabetical order.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241007102549.34926-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There's no need to use the OF-specific variant to get the match data.
Switch to using device_get_match_data() instead.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241007102859.35602-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
OF-specific routines should not be used unless necessary. Generic device
properties are preferred so switch to using them in the driver code.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241007103440.38416-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make it possible to build the module when COMPILE_TEST is enabled for
better build coverage. Stop using of_match_ptr() to avoid build warnings.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241007103440.38416-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There's no reason to use OF-specific variants of property getters.
Switch to using the preferred, generic device property helpers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241007104052.39374-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver doesn't really depend on interfaces from OF_GPIO so the
Kconfig dependency can be dropped.
Suggested-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Link: https://lore.kernel.org/r/20241008081555.23465-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
FTDI FT2232H is a USB to GPIO chip. Sealevel produces some devices
with this chip. FT2232H presents itself as a composite device with two
interfaces (each is an "MPSSE"). Each MPSSE has two banks (high and low)
of 8 GPIO each. I believe some MPSSE's have only one bank, but I don't
know how to identify them (I don't have any for testing) and as a result
are unsupported for the time being.
Additionally, this driver provides software polling-based interrupts for
edge detection. For the Sealevel device I have to test with, this works
well because there is hardware debouncing. From talking to Sealevel's
people, this is their preferred way to do edge detection.
Signed-off-by: Mary Strodl <mstrodl@csh.rit.edu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241009131131.1618329-1-mstrodl@csh.rit.edu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In the 7th generation of the SoC from Aspeed, the control logic of the
GPIO controller has been updated to support per-pin control. Each pin now
has its own 32-bit register, allowing for individual control of the pin's
value, direction, interrupt type, and other settings. The permission for
coprocessor access is supported by the hardware but hasn't been
implemented in the current patch.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20241008081450.1490955-8-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The AST2700 is the 7th generation SoC from Aspeed, featuring two GPIO
controllers: one with 12 GPIO pins and another with 216 GPIO pins.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20241008081450.1490955-7-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add low-level operations (llops) to abstract the register access for GPIO
registers and the coprocessor request/release. With this abstraction
layer, the driver can separate the hardware and software logic, making it
easier to extend the driver to support different hardware register
layouts.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> # AST2600
Link: https://lore.kernel.org/r/20241008081450.1490955-6-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The bank array name is only used to determine if the GPIO offset is valid,
and this condition can be replaced by checking if the offset exceeds the
ngpio property.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20241008081450.1490955-5-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use module_platform_driver() to replace module_platform_driver_probe().
The former utilizes platform_driver_register(), which allows the driver to
defer probing when it doesn't acquire the necessary resources due to probe
order. In contrast, the latter uses __platform_driver_probe(), which
includes the comment "Note that this is incompatible with deferred
probing." Since our GPIO driver requires access to the clock resource, the
former is more suitable.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20241008081450.1490955-4-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=uI8y
-----END PGP SIGNATURE-----
Merge tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Two fixes for Windows symlink handling"
* tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix creating native symlinks pointing to current or parent directory
cifs: Improve creating native symlinks pointing to directory
Here are some small USB fixes for some reported problems for 6.12-rc3.
Include in here is:
- fix for yurex driver that was caused in -rc1
- build error fix for usbg network filesystem code
- onboard_usb_dev build fix
- dwc3 driver fixes for reported errors
- gadget driver fix
- new USB storage driver quirk
- xhci resume bugfix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZwu6fw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yly6QCfdXwmKEqG4H7xonERzmEkP9/sYtoAnAsafKV5
5pWgy7Jw+WH1s1L7IzGy
=xrG1
-----END PGP SIGNATURE-----
Merge tag 'usb-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for some reported problems for 6.12-rc3.
Include in here is:
- fix for yurex driver that was caused in -rc1
- build error fix for usbg network filesystem code
- onboard_usb_dev build fix
- dwc3 driver fixes for reported errors
- gadget driver fix
- new USB storage driver quirk
- xhci resume bugfix
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
net/9p/usbg: Fix build error
USB: yurex: kill needless initialization in yurex_read
Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant"
usb: xhci: Fix problem with xhci resume from suspend
usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support
usb: dwc3: core: Stop processing of pending events if controller is halted
usb: dwc3: re-enable runtime PM after failed resume
usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip
usb: gadget: core: force synchronous registration
Here is a single driver core fix, and a .mailmap update, for 6.12-rc3.
The fix is for the rust driver core bindings, turned out that the
from_raw binding wasn't a good idea (don't want to pass a pointer to a
reference counted object without actually incrementing the pointer.) So
this change fixes it up as the from_raw binding came in in -rc1.
The other change is a .mailmap update.
Both have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZwvFxw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymgbgCeLug+WiSiqv1fx5dvJ4dgeA98uUUAn1ZarBGW
9OjdvJu48mDttrIDhwzo
=RtLK
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is a single driver core fix, and a .mailmap update.
The fix is for the rust driver core bindings, turned out that the
from_raw binding wasn't a good idea (don't want to pass a pointer to a
reference counted object without actually incrementing the pointer.)
So this change fixes it up as the from_raw binding came in in -rc1.
The other change is a .mailmap update.
Both have been in linux-next for a while with no reported issues"
* tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mailmap: update mail for Fiona Behrens
rust: device: change the from_raw() function
- Fix crash in memcpy on 8xx due to dcbz workaround since recent changes.
Thanks to: Christophe Leroy.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZwsCdwAKCRAF0oADX8se
IQ62AQCw2iHYOwLeymqgAhXaXh1kmpJnqdfjxsrC7jBz0HpqbwEA3fD0nCxwN2T4
bXZBsA2BR+WqKV+1y8L6Af6dC1Gr1Qg=
=5L6I
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix crash in memcpy on 8xx due to dcbz workaround since recent
changes
Thanks to Christophe Leroy.
* tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Fix kernel DTLB miss on dcbz
four small fixes, three in drivers and one in the FC transport class
to add idempotence to state setting.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZwnsDSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZYjAP9QKRk5
1i/g9TyqFCurbt+R4BJGiNg+89WUnLxgNbThsgD9FqmXRsm2mGok02lQS4bz5Asv
OkNVO2se/q6IlplijV8=
=RCJc
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes, three in drivers and one in the FC transport class
to add idempotence to state setting"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_fc: Allow setting rport state to current state
scsi: wd33c93: Don't use stale scsi_pointer value
scsi: fnic: Move flush_work initialization out of if block
scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()
- Add missing dependencies on REGMAP_I2C for several drivers
- Fix memory leak in adt7475 driver
- Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon driver
to match other sensor labels
-----BEGIN PGP SIGNATURE-----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=lXfx
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Add missing dependencies on REGMAP_I2C for several drivers
- Fix memory leak in adt7475 driver
- Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon
driver to match other sensor labels
* tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max1668) Add missing dependency on REGMAP_I2C
hwmon: (ltc2991) Add missing dependency on REGMAP_I2C
hwmon: (adt7470) Add missing dependency on REGMAP_I2C
hwmon: (adm9240) Add missing dependency on REGMAP_I2C
hwmon: (mc34vr500) Add missing dependency on REGMAP_I2C
hwmon: (tmp513) Add missing dependency on REGMAP_I2C
hwmon: (adt7475) Fix memory leak in adt7475_fan_pwm_config()
hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature
This kselftest update for Linux 6.12-rc3 consists of several fixes
for build, run-time errors, and reporting errors:
-- ftrace: regression test for a kernel crash when running function graph
tracing and then enabling function profiler.
-- rseq: fix for mm_cid test failure.
-- vDSO:
- fixes to reporting skip and other error conditions.
- changes unconditionally build chacha and getrandom tests on
all architectures to make it easier for them to run in CIs.
- build error when sched.h to bring in CLONE_NEWTIME define.
-----BEGIN PGP SIGNATURE-----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=1etd
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes for build, run-time errors, and reporting errors:
- ftrace: regression test for a kernel crash when running function
graph tracing and then enabling function profiler.
- rseq: fix for mm_cid test failure.
- vDSO:
- fixes to reporting skip and other error conditions
- changes unconditionally build chacha and getrandom tests on all
architectures to make it easier for them to run in CIs
- build error when sched.h to bring in CLONE_NEWTIME define"
* tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
ftrace/selftest: Test combination of function_graph tracer and function profiler
selftests/rseq: Fix mm_cid test failure
selftests: vDSO: Explicitly include sched.h
selftests: vDSO: improve getrandom and chacha error messages
selftests: vDSO: unconditionally build getrandom test
selftests: vDSO: unconditionally build chacha test
- Disable kunit tests for arm64+ACPI
- Fix refcount issue in kunit tests
- Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq
- Drop type ref on 'msi-parent in fsl,qoriq-mc binding
- Move elgin,jg10309-01 to its own binding from trivial-devices
-----BEGIN PGP SIGNATURE-----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=ot6P
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable kunit tests for arm64+ACPI
- Fix refcount issue in kunit tests
- Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq
- Drop type ref on 'msi-parent in fsl,qoriq-mc binding
- Move elgin,jg10309-01 to its own binding from trivial-devices
* tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Skip kunit tests when arm64+ACPI doesn't populate root node
of: Fix unbalanced of node refcount and memory leaks
dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent
dt-bindings: display: elgin,jg10309-01: Add own binding
- switch fbdev drivers back to struct platform_driver::remove()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZwmOgAAKCRD3ErUQojoP
X2GzAQC63kftiby6Zfwe2v56ZiYhF4pHBVTiShdrHtZx/XQe/AD6AmGc5GQFDVXX
9AwHMc2O9Ii7XN/3TJIB1gGYMj9WTgY=
=jf8/
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev platform driver fix from Helge Deller:
"Switch fbdev drivers back to struct platform_driver::remove()
Now that 'remove()' has been converted to the sane new API, there's
no reason for the 'remove_new()' use, so this converts back to the
traditional and simpler name.
See commits
5c5a7680e6 ("platform: Provide a remove callback that returns no value")
0edb555a65 ("platform: Make platform_driver::remove() return void")
for background to this all"
* tag 'fbdev-for-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Switch back to struct platform_driver::remove()
- fix clock handle leak in probe() error path in gpio-aspeed
- add a dummy register read to ensure the write actually completed
-----BEGIN PGP SIGNATURE-----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=o9yV
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix clock handle leak in probe() error path in gpio-aspeed
- add a dummy register read to ensure the write actually completed
* tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: aspeed: Use devm_clk api to manage clock source
gpio: aspeed: Add the flush write to ensure the write complete.
Localio Bugfixes:
* Remove duplicated include in localio.c
* Fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
* Fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
* Fix nfsd_file tracepoints to handle NULL rqstp pointers
Other Bugfixes:
* Fix program selection loop in svc_process_common
* Fix integer overflow in decode_rc_list()
* Prevent NULL-pointer dereference in nfs42_complete_copies()
* Fix CB_RECALL performance issues when using a large number of delegations
-----BEGIN PGP SIGNATURE-----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=QBvR
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.12-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Localio Bugfixes:
- remove duplicated include in localio.c
- fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
- fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
- fix nfsd_file tracepoints to handle NULL rqstp pointers
Other Bugfixes:
- fix program selection loop in svc_process_common
- fix integer overflow in decode_rc_list()
- prevent NULL-pointer dereference in nfs42_complete_copies()
- fix CB_RECALL performance issues when using a large number of
delegations"
* tag 'nfs-for-6.12-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: remove revoked delegation from server's delegation list
nfsd/localio: fix nfsd_file tracepoints to handle NULL rqstp
nfs_common: fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
nfs_common: fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies()
SUNRPC: Fix integer overflow in decode_rc_list()
sunrpc: fix prog selection loop in svc_process_common
nfs: Remove duplicated include in localio.c
Fix rcuog kthread wakeup invocation from softirq context on a CPU
which has been marked offline. This can happen when new callbacks
are enqueued from a softirq on an offline CPU before it calls
rcutree_report_cpu_dead(). When this happens on NOCB configuration,
the rcuog wake-up is deferred through an IPI to an online CPU.
This is done to avoid call into the scheduler which can risk
arming the RT-bandwidth after hrtimers have been migrated out
and disabled. However, doing IPI call from softirq is not allowed
Fix this by forcing deferred rcuog wakeup through the NOCB timer
when the CPU is offline.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSi2tPIQIc2VEtjarIAHS7/6Z0wpQUCZwjWYAAKCRAAHS7/6Z0w
pQ8iAP9vbhWlWuwlfZqQJK8Xb5b0kVx3nJjAin/5pY/lbWV7IgEA1DUzTAZKXU5Z
yZmjM3l9RpMAxLSgevJKoJD+vR0POQA=
=EVin
-----END PGP SIGNATURE-----
Merge tag 'rcu.fixes.6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU fix from Neeraj Upadhyay:
"Fix rcuog kthread wakeup invocation from softirq context on a CPU
which has been marked offline.
This can happen when new callbacks are enqueued from a softirq on an
offline CPU before it calls rcutree_report_cpu_dead(). When this
happens on NOCB configuration, the rcuog wake-up is deferred through
an IPI to an online CPU. This is done to avoid call into the scheduler
which can risk arming the RT-bandwidth after hrtimers have been
migrated out and disabled.
However, doing IPI call from softirq is not allowed: Fix this by
forcing deferred rcuog wakeup through the NOCB timer when the CPU is
offline"
* tag 'rcu.fixes.6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
rcu/nocb: Fix rcuog wake-up from offline softirq
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZwkZXAAKCRCAXGG7T9hj
vntCAP9pcmYoVLIUtnOhe3HN1nj8Y+QTBmCP0s63sCgifkZMjAD+KmkuE7pkGQ70
j/DPQzmvRoTQfEoByAWI612PUKifBw4=
=bSZK
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.12a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for topology information of Xen PV guests"
* tag 'for-linus-6.12a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: mark boot CPU of PV guest in MSR_IA32_APICBASE
Masami reported a bug when running function graph tracing then the
function profiler. The following commands would cause a kernel crash:
# cd /sys/kernel/tracing/
# echo function_graph > current_tracer
# echo 1 > function_profile_enabled
In that order. Create a test to test this two to make sure this does not
come back as a regression.
Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2
Link: https://lore.kernel.org/all/20241010165235.35122877@gandalf.local.home/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=sE7Y
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Explicitly have a mshot_finished condition for IORING_OP_RECV in
multishot mode, similarly to what IORING_OP_RECVMSG has. This doesn't
fix a bug right now, but it makes it harder to actually have a bug
here if a request takes multiple iterations to finish.
- Fix handling of retry of read/write of !FMODE_NOWAIT files. If they
are pollable, that's all we need.
* tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux:
io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT
io_uring/rw: fix cflags posting for single issue multishot read
