There are conditions, albeit somewhat unlikely, under which right hand
expressions, calculating the end of time period in functions like
repaper_frame_fixed_repeat(), may overflow.
For instance, if 'factor10x' in repaper_get_temperature() is high
enough (170), as is 'epd->stage_time' in repaper_probe(), then the
resulting value of 'end' will not fit in unsigned int expression.
Mitigate this by casting 'epd->factored_stage_time' to wider type before
any multiplication is done.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 3589211e9b ("drm/tinydrm: Add RePaper e-ink driver")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116134801.22067-1-n.zhandarovich@fintech.ru
Currently CONFIG_PWM is a bool but I intend to change it to tristate. If
CONFIG_PWM=m in the configuration, the cpp symbol CONFIG_PWM isn't
defined and so the PWM code paths in the ti-sn65dsi86 driver are not
used.
The correct way to check for CONFIG_PWM is using IS_REACHABLE which does
the right thing for all cases
CONFIG_DRM_TI_SN65DSI86 ∈ { y, m } x CONFIG_PWM ∈ { y, m, n }.
There is no change until CONFIG_PWM actually becomes tristate.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217174936.758420-2-u.kleine-koenig@baylibre.com
Do a bit of house keeping in gpu_scheduler.h by grouping the API by type
of object it operates on.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-7-tvrtko.ursulin@igalia.com
Now that we have a header file for internal scheduler interfaces we can
move some more prototypes into it. By doing that we eliminate the chance
of drivers trying to use something which was not intended to be used.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-6-tvrtko.ursulin@igalia.com
Helper is for scheduler internal use so lets hide it from DRM drivers
completely.
At the same time we change the method of checking whethere there is
anything in the queue from peeking to looking at the node count.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-5-tvrtko.ursulin@igalia.com
We can re-order some struct members and take u32 credits outside of the
pointer sandwich and also for the last_dependency member we can get away
with an unsigned int since for dependency we use xa_limit_32b.
Pahole report before:
/* size: 160, cachelines: 3, members: 14 */
/* sum members: 156, holes: 1, sum holes: 4 */
/* last cacheline: 32 bytes */
And after:
/* size: 152, cachelines: 3, members: 14 */
/* last cacheline: 24 bytes */
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-4-tvrtko.ursulin@igalia.com
Replace a copy of DRM scheduler's to_drm_sched_job with a copy of a newly
added drm_sched_entity_queue_pop.
This allows breaking the hidden dependency that queue_node has to be the
first element in struct drm_sched_job.
A comment is also added with a reference to the mailing list discussion
explaining the copied helper will be removed when the whole broken
amdgpu_job_stop_all_jobs_on_sched is removed.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Cc: Zhang, Hawking <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-3-tvrtko.ursulin@igalia.com
Idea is to add helpers for peeking and popping jobs from entities with
the goal of decoupling the hidden assumption in the code that queue_node
is the first element in struct drm_sched_job.
That assumption usually comes in the form of:
while ((job = to_drm_sched_job(spsc_queue_pop(&entity->job_queue))))
Which breaks if the queue_node is re-positioned due to_drm_sched_job
being implemented with a container_of.
This also allows us to remove duplicate definitions of to_drm_sched_job.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-2-tvrtko.ursulin@igalia.com
If mhi_fw_load_handler() bails out early because the EE is not capable
of loading firmware, we may reference fw_load_type in cleanup which is
uninitialized at this point. The cleanup code checks fw_load_type as a
proxy for knowing if fbc_image was allocated and needs to be freed, but
we can directly test for that. This avoids the possible uninitialized
access and appears to be clearer code.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/e3148ac4-7bb8-422d-ae0f-18a8eb15e269@stanley.mountain/
Fixes: f88f1d0998 ("bus: mhi: host: Add a policy to enable image transfer via BHIe in PBL")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214162109.3555300-1-quic_jhugo@quicinc.com
This driver uses the enable-gpios property and it is confusing that the
error message refers to reset-gpios. Use the correct name when the
enable GPIO is not found.
Fixes: e2450d32e5 ("drm/panel: ili9882t: Break out as separate driver")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217120428.3779197-1-jkeeping@inmusicbrands.com
User-space cursor-image data is encoded in ARBG8888, while hardware
supports ARGB4444. Implement the format conversion as part of the
format-helper framework, so that other drivers can benefit.
This allows to respect the damage area of the cursor update. In
previous code, all cursor image data had to be converted on each
update. Now, only the changed areas require an update. The hardware
image is always updated completely, as it is required for the
checksum update.
The format-conversion helper still contains the old implementation's
optimization of writing 2 output pixels at the same time.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-3-tzimmermann@suse.de
Setting the cursor image requires a 32-bit checksum of the cursor
image data. The current cursor code converts the image to ARGB4444
format and computes the checksum in a single step. Moving the
checksum calculation into a separate helper will allow to move the
format conversion into a shared helper.
v2:
- don't loop for checksum'ing final pixel (Jocelyn)
- fix typo in commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-2-tzimmermann@suse.de
drm_atomic_helper_wait_for_flip_done() will wait for pages flips on all
CRTCs affected by a given commit. It takes the drm_atomic_state being
committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-26-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_wait_for_dependencies() is the final part of a commit
and signals it completion. It takes the drm_atomic_state being committed
as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-25-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_cleanup_planes() is one of the final part of a commit,
and will free up all plane resources used in the previous commit. It
takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-24-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_wait_for_vblanks() waits for vblank events on all the
CRTCs affected by a commit. It takes the drm_atomic_state being
committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-23-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_commit_hw_done() signals hardware completion of a
given commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-22-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_fake_vblank() fake a vblank event if needed when a new
commit is being applied. It takes the drm_atomic_state being committed
as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-21-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_commit_writebacks() updates all writeback connectors
affected by a new commit. It takes the drm_atomic_state being committed
as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-20-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_bridge_chain_enable() enables all bridges affected by a new
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-19-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_bridge_chain_pre_enable() enables all bridges affected by
a new commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-18-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_commit_modeset_enables() enables all outputs affected
by a new commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-17-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_commit_planes() updates all planes affected by a new
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-16-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
crtc_set_mode() deals with calling the modeset related hooks for CRTC,
connectors and bridges if and when a new commit changes them. It takes
the drm_atomic_state being committed as a parameter.
However, that parameter name is called as old_state, which is pretty
confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-15-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_update_legacy_modeset_state() updates all the legacy
modeset pointers a connector, encoder or CRTC might have with the ones
being setup by a given commit. It takes the drm_atomic_state being
committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-14-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_bridge_chain_post_disable() disables all bridges affected by
a new commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-13-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_bridge_chain_disable() disables all bridges affected by a new
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-12-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
disable_outputs() disables all connectors and CRTCs affected by a
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called as old_state, which is pretty
confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-11-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_modeset_disables() disables all the outputs affected
by a commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-10-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_commit_tail_rpm() is the final part of an atomic
commit, and is given the state being committed as a parameter.
However, that parameter is named old_state, but documented as the "new
modeset state" which is all super confusing.
Let's rename that parameter to state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-9-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_commit_tail() is the final part of an atomic commit,
and is given a parameter with the drm_atomic_state being committed.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-8-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_wait_for_dependencies() waits for all the dependencies
a commit has before going forward with it. It takes the drm_atomic_state
being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-7-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Even though the commit_tail () drm_atomic_state parameter is called
old_state, it's actually the state being committed which is confusing.
It's even more confusing since the atomic_commit_tail hook being called
by commit_tail() parameter is called state.
Let's rename the variable from old_state to state to make it less
confusing.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-6-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_post_disable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-5-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_disable hook prototype to pass
it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_enable hook prototype to pass it
directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_pre_enable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-2-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Having an DRM_MODE_CONNECTOR_Unknown connector type is considered bad, and
drm_panel_bridge_add_typed() and derivatives are deprecated for this.
drm_panel_init() won't prevent initializing a panel with a
DRM_MODE_CONNECTOR_Unknown connector type. Luckily there are no in-tree
users doing it, so take this as an opportinuty to document a valid
connector type must be passed.
Returning an error if this rule is violated is not possible because
drm_panel_init() is a void function. Add at least a warning to make any
violations noticeable, especially to non-upstream drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214-drm-assorted-cleanups-v7-5-88ca5827d7af@bootlin.com
