Similar to most places in the MPTCP code. So instead of passing the
subflow list and use list_for_each_entry(subflow, list, node), pass the
msk and use mptcp_for_each_subflow(msk, subflow).
That's clearer and more uniform with the rest.
While at it, add 'pm_' prefix for the exported one to easily identify
the origin. Plus replace 'lookup' by 'has', because a bool is returned.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-9-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before, they were only checked on demand, but it seems better to check
them each time received ADD_ADDRs are checked.
Errors are only reported when the counter exists, and the value is not
the expected one. This is similar to what is done in chk_join_nr: it
reduces the output, and avoids a lot of 'skip' when validating older
kernels. Also here, some tests need to adapt the default expected
counters, e.g. when ADD_ADDR echo are dropped on the reception side, or
it is not possible to send an ADD_ADDR due to the limited option space.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-8-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the feature added by parent commit, where it is now
possible to send an ADD_ADDR with a v6 IP address and a port number,
while the connection is using TCP Timestamps.
This test is simply a copy of the previous one: "signal address with
port", but using IPv6 addresses. This test is only executed if the
add_addr_v6_port_drop_ts sysctl knob is available. If not, it means the
kernel doesn't support this feature.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-7-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With TCP-timestamps (padded) taking 12 bytes and ADD_ADDR IPv6 + port
taking 30 bytes, the 40-byte limit for the TCP options is reached. In
this case, it is then not possible to send the signal.
To be able to send this ADD_ADDR, the TCP timestamps option can now be
dropped. This is done, when needed by setting the *drop_ts parameter
from mptcp_established_options. This feature is controlled by a new
net.mptcp.add_addr_v6_port_drop_ts sysctl knob, enabled by default.
It is important to keep in mind that dropping the TCP timestamps option
for one packet of the connection could eventually disrupt some
middleboxes: even if it should be unlikely, they could drop the packet
or even block the connection. That's why this new feature can be
controlled by a sysctl knob.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/448
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-6-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With TCP-timestamps (padded) taking 12 bytes and ADD_ADDR IPv6 + port
taking 30 bytes, the 40-byte limit for the TCP options is reached. In
this case, it is then not possible to send the address signal.
The idea is to let MPTCP dropping the TCP-timestamps option for some
specific packets, to be able to send some specific pure ACK carrying >28
bytes of MPTCP options, like with this specific ADD_ADDR. A new
parameter is passed from tcp_established_options to the MPTCP side to
indicate if the TCP TS option is used, and if it should be dropped. The
next commit implements the part on MPTCP side, but split into two
patches to help TCP maintainers to identify the modifications on TCP
side. This feature will be controlled by a new add_addr_v6_port_drop_ts
MPTCP sysctl knob.
It is important to keep in mind that dropping the TCP timestamps option
for one packet of the connection could eventually disrupt some
middleboxes: even if it should be unlikely, they could drop the packet
or even block the connection. That's why this new feature will be
controlled by a sysctl knob.
Note that it would be technically possible to squeeze both options into
the header if the ADD_ADDR is first written, and then the TCP timestamps
without the NOPs preceding it. But this means more modifications on TCP
side, plus some middleboxes could still be disrupted by that.
In this implementation, an unused bit is used in mptcp_out_options
structure to avoid passing an address to a local variable. Reading and
setting it needs CONFIG_MPTCP, so the whole block now has this #if
condition: mptcp_established_options() is then no longer used without
CONFIG_MPTCP.
About alternatives, instead of passing a new boolean (has_ts), another
option would be to pass the whole option structure (opts), but
'struct tcp_out_options' is currently defined in tcp_output.c, and it
would need to be exported. Plus that means the removal of the TCP TS
option would be done on the MPTCP side, and not here on the TCP side.
It feels clearer to remove other TCP options from the TCP side, than
hiding that from the MPTCP side.
Yet an other alternative would be to pass the size already taken by the
other TCP options, and have a way to drop them all when needed. But this
feels better to target only the timestamps option where dropping it
should be safe, even if it is currently the only option that would be
set before MPTCP, when MPTCP is used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-5-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This sysctl is going to be used in the next commits to drop TCP
timestamps option, to be able to send an ADD_ADDR with a v6 IP address
and a port number. It is enabled by default.
This knob is explicitly disabled in the MPTCP Join selftest, with the
"signal addr list progresses after tx drop" subtest, to continue
verifying the previous behaviour where the ADD_ADDR is not sent due to a
lack of space.
While at it, move syn_retrans_before_tcp_fallback down from struct
mptcp_pernet, to avoid creating another 3 bytes hole.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-4-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_add_addr_len helper was called twice: in mptcp_pm_add_addr_signal,
then just after in mptcp_established_options_add_addr. Both to check
the remaining space.
The second call is not needed: if there is not enough space,
mptcp_pm_add_addr_signal will return false, and the caller,
mptcp_established_options_add_addr, will do the same without re-checking
the size again. Instead, mptcp_pm_add_addr_signal can directly set the
size.
Note that the returned size can be negative when other suboptions are
dropped, e.g. to send an echo ADD_ADDR with a v4 address, and no port.
While at it:
- move mptcp_add_addr_len to pm.c, as it is now only used from there
- use 'int' in mptcp_add_addr_len for the size, instead of having a mix
- use a bool for 'ret' in mptcp_pm_add_addr_signal
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-3-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_rm_addr_len helper was called twice: in mptcp_pm_rm_addr_signal,
then just after in mptcp_established_options_rm_addr. Both to check the
remaining space.
The second call is not needed: if there is not enough space,
mptcp_pm_rm_addr_signal will return false, and the caller,
mptcp_established_options_rm_addr, will do the same without re-checking
the size again. Instead, mptcp_pm_rm_addr_signal can directly set the
size.
While at it, move mptcp_rm_addr_len to pm.c, as it is now only used
there, once.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-2-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use a signed int for the returned size, because when other options are
dropped, the size can be negative, e.g. to send an echo ADD_ADDR with a
v4 address, and no port.
The behaviour is not changed, because it was working as expected with an
overflow. But it is clearer like this, and it will help later on.
Even if, for the moment, only the ADD_ADDR size can be negative in some
cases, a signed int is now used for all mptcp_established_options_*()
helpers, not to mismatch the type, and as a question of uniformity.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-1-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
George Moussalem says:
====================
IPQ5018: Add and enable GEPHY RX and TX clocks
This patch series addresses a missing hardware description issue for
the Qualcomm IPQ5018 Internal Ethernet PHY, where the data paths fail
to function correctly unless their dedicated RX and TX clocks are
explicitly enabled.
Further testing revealed that leaving these clocks unmanaged by the
kernel, they were inadvertently left enabled by the bootloader / QSDK
platform, which masked the issue. Testing a fresh network configuration
path exposed that the data link fails to work without explicit software
gating.
To correctly introduce the required multi-clock properties, the IPQ5018
binding definition must first be split away from the shared
qca,ar803x.yaml schema. This isolation is required because ar803x
references the generic ethernet-phy.yaml, which enforces a strict
single-clock limit constraint.
- Patch 1: Moves the clocks property and its restriction out of the
generic ethernet-phy.yaml schema to individual bindings files
that need it to allow for PHYs that require multiple clocks.
- Patch 2: Add clocks property to qca,ar803x.yaml for the IPQ5018 PHY.
- Patch 3: Updates the Qualcomm AT803x PHY driver framework to acquire,
enable, and gate these clocks upon link state changes for
runtime power optimization.
====================
Link: https://patch.msgid.link/20260608-ipq5018-gephy-clocks-v4-0-fb2ccd56894b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Further testing revealed that the RX and TX clocks of the IPQ5018 PHY
need to be explicitly enabled. As such, add the required clocks to the
schema.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://patch.msgid.link/20260608-ipq5018-gephy-clocks-v4-2-fb2ccd56894b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The clocks property has a restriction to maximum one.
Yet, some PHYs may require more than 1 clock such as the IPQ5018 PHY
which requires two clocks for RX and TX. As such, increase maxItems to
two.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://patch.msgid.link/20260608-ipq5018-gephy-clocks-v4-1-fb2ccd56894b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CONFIG_GILBARCONAP option has never been defined by the kernel, but
is referred to by drivers/net/ethernet/freescale/fec_main.c. Remove this
reference to eliminate dead code.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260609045200.32606-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mr_table.cache_resolve_queue_len is always updated under
spin_lock_bh(&mfc_unres_lock).
Let's convert it to u32.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609222013.1550355-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnx2x_init_one() falls through to the common memory cleanup path for
several failures after probe has already acquired additional resources.
If register_netdev() fails after bnx2x_set_int_mode(), MSI/MSI-X remains
enabled. If later failures happen after bnx2x_iov_init_one(), PF SR-IOV
state can be left allocated. Also, failures after bnx2x_vfpf_acquire()
must release the PF resources before freeing the VF-PF mailbox allocated
by bnx2x_vf_pci_alloc().
Add error labels matching the resource acquisition order so probe failure
disables MSI/MSI-X, removes SR-IOV state, releases VF-PF resources,
deallocates VF PCI resources, and then frees the common driver memory.
Also clear PCI drvdata before freeing the netdev on probe failure.
Cc: stable+noautosel@kernel.org # untested fix to unlikely error path
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260609074610.1968721-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-7.1-rc8).
Conflicts:
drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
f67aead16e ("net: txgbe: rework service event handling")
57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
net/rds/info.c
512db8267b ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
6e94eeb2a2 ("rds: convert to getsockopt_iter")
Adjacent changes:
include/net/sock.h
1ee90b77b7 ("net: guard timestamp cmsgs to real error queue skbs")
f0de88303d ("net: make is_skb_wmem() available to modules")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is relatively small, mostly because we are a bit behind our PW
queue. I'm not aware of any pending regression.
Current release - regressions:
- netfilter: nf_tables_offload: drop device refcount on error
Previous releases - regressions:
- core: add pskb_may_pull() to skb_gro_receive_list()
- xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
- ipv6: fix a potential NPD in cleanup_prefix_route()
- ipv4: fix use-after-free caused by the fqdir_pre_exit() flush
- eth: bnxt_en: fix NULL pointer dereference
- eth: emac: fix use-after-free during device removal
- eth: octeontx2-af: fix memory leak in rvu_setup_hw_resources()
- eth: tun: zero the whole vnet header in tun_put_user()
- eth: sit: reload inner IPv6 header after GSO offloads
Previous releases - always broken:
- core: fix double-free in netdev_nl_bind_rx_doit()
- netfilter: nf_log: validate MAC header was set before dumping it
- xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
- tcp: restrict SO_ATTACH_FILTER to priv users
- mctp: usb: fix race between urb completion and rx_retry cancellation
- eth: mlx5: fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
- eth: mvpp2: sync RX data at the hardware packet offset
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=xvWb
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec and netfilter.
This is relatively small, mostly because we are a bit behind our PW
queue. I'm not aware of any pending regression.
Current release - regressions:
- netfilter: nf_tables_offload: drop device refcount on error
Previous releases - regressions:
- core: add pskb_may_pull() to skb_gro_receive_list()
- xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
- ipv6: fix a potential NPD in cleanup_prefix_route()
- ipv4: fix use-after-free caused by the fqdir_pre_exit() flush
- eth:
- bnxt_en: fix NULL pointer dereference
- emac: fix use-after-free during device removal
- octeontx2-af: fix memory leak in rvu_setup_hw_resources()
- tun: zero the whole vnet header in tun_put_user()
- sit: reload inner IPv6 header after GSO offloads
Previous releases - always broken:
- core: fix double-free in netdev_nl_bind_rx_doit()
- netfilter: nf_log: validate MAC header was set before dumping it
- xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
- tcp: restrict SO_ATTACH_FILTER to priv users
- mctp: usb: fix race between urb completion and rx_retry
cancellation
- eth:
- mlx5: fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
- mvpp2: sync RX data at the hardware packet offset"
* tag 'net-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
octeontx2-af: fix IP fragment flag corruption on custom KPU profile load
ipv6: Fix a potential NPD in cleanup_prefix_route()
net: txgbe: initialize PHY interface to 0
net: txgbe: distinguish module types by checking identifier
net: txgbe: initialize module info buffer
net: mvpp2: build skb from XDP-adjusted data on XDP_PASS
net: mvpp2: refill RX buffers before XDP or skb use
net: mvpp2: limit XDP frame size to the RX buffer
net: mvpp2: sync RX data at the hardware packet offset
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
netfilter: nf_log: validate MAC header was set before dumping it
netfilter: x_tables: avoid leaking percpu counter pointers
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
netfilter: nf_tables_offload: drop device refcount on error
netfilter: revalidate bridge ports
rds: mark snapshot pages dirty in rds_info_getsockopt()
ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()
ptp: ocp: fix resource freeing order
...
sch_cbs and sch_taprio print ecmd.base.speed, even if
netif_get_link_ksettings() failed. When netif_get_link_ksettings()
fails the ecmd may not be initialized.
Use the always-initialized speed variable instead.
The semantics change slightly because UNKNOWN will
never be printed, but that doesn't seem important
enough to complicate the code for.
This is a _dbg() print, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609183353.1109641-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is a minor performance / conceptual fix.
1) ip6erspan_tunnel_xmit()
ERSPAN tunnel can mirror both IPv4 and IPv6 traffic, skb
(the packet being mirrored) can be an IPv4 packet,
and thus dst can be an IPv4 destination entry
Use dst_mtu() which contains generic logic for both families.
2) ip4ip6_err()
skb2 has been prepared as an IPv4 packet, and its destination
is an IPv4 route.
dst6_mtu() is optimized for IPv6 destinations and uses INDIRECT_CALL_1
to call ip6_mtu() directly if the ops match.
We should use dst4_mtu() instead.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609091337.2672441-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
npc_cn20k_apply_custom_kpu() overwrites KPU profile entries with custom
firmware values and then calls npc_cn20k_update_action_entries_n_flags()
over all entries. Since the same function already ran during default
profile initialisation, entries not overridden by the custom firmware
get their flags translated twice, corrupting the CN20K-specific values.
Fix this by extracting the per-entry translation into a helper
npc_cn20k_translate_action_flags() and calling it as each custom entry
is loaded, removing the redundant batch call at the end.
Fixes: ef992a0f12 ("octeontx2-af: npc: cn20k: MKEX profile support")
Cc: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260608095455.1499203-1-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski says:
====================
net: shaper: follow ups to recent fixes
As discussed previously on the patch set with real fixes the xa_locking
in shapers is a little confusing, remove it.
Link: https://lore.kernel.org/20260506000628.1501691-2-kuba@kernel.org
The remaining three patches are an attempt to silence AI reviewers,
I believe Sashiko was complaining about these non-issues. Not adding
Reported tags since these are false positives.
====================
Link: https://patch.msgid.link/20260609183224.1108521-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Various AI scan tools may complain that we don't support resuming
the cap dump. This is true, but the cap dumps are tiny.
net_shaper_nl_cap_pre_dumpit() sets up the dump for just
one device, so the size of the dump scales with NET_SHAPER_SCOPE_MAX (3).
We don't expect them to ever need more than a 4kB page.
Document this.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609183224.1108521-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If we fail to insert a node into the XArray in net_shaper_pre_insert()
we can free it directly - it was never visible to the RCU readers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609183224.1108521-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The shaper insertion and update code takes xa_lock() explicitly.
Paolo explained that the locking was purely to avoid re-taking
the lock in loops. But it may be mis-read as if it was expecting
readers to be fenced off by xa_lock. Readers of XArray are purely
under RCU. Remove explicit taking of xa_lock().
All writers to hierarchy->shapers are serialized by the netdev
instance lock (or run after netdev is made inaccessible to readers).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609183224.1108521-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Rg2q
-----END PGP SIGNATURE-----
Merge tag 'nf-26-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Revalidate bridge ports, add missing NULL checks to fetch the bridge
device by the port. From Florian Westphal.
2) Fix netdevice refcount leak in the error path of nft_fwd hardware
offload function, also from Florian.
3) Unregister helper expectfn callback on conntrack helper module
removal, otherwise dangling pointer remains in place,
from Weiming Shi.
4) Fix possible pointer infoleak in getsockopt() IPT_SO_GET_ENTRIES,
From Kyle Zeng.
5) Validate that device MAC header is present before nf_syslog
accesses it. From Xiang Mei.
6-8) Three patches to address a possible infoleak of stale stack
data in three nf_tables expressions, due to mismatch in the
_init() and _eval() function which is possible since 14fb07130c.
From Davide Ornaghi and Florian Westphal.
netfilter pull request 26-06-10
* tag 'nf-26-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
netfilter: nf_log: validate MAC header was set before dumping it
netfilter: x_tables: avoid leaking percpu counter pointers
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
netfilter: nf_tables_offload: drop device refcount on error
netfilter: revalidate bridge ports
====================
Link: https://patch.msgid.link/20260610161629.214092-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Breno Leitao says:
====================
net: rds: convert rds to getsockopt_iter
This series continues the conversion of the remaining proto_ops getsockopt
callbacks to the new getsockopt_iter callback introduced in commit
67fab22a7a ("net: add getsockopt_iter callback to proto_ops"), this time
for RDS.
RDS is a little more involved than the protocols converted so far, because
the RDS_INFO_* options snapshot kernel state directly into the destination
buffer: the info producers memcpy into the pages under a spinlock via
kmap_atomic() and so must not fault.
The conversion preserves that model — it obtains the same page array and
starting offset from opt->iter_out with iov_iter_extract_pages(),
preallocating the array so the iterator fills it in place, and leaves
the rds_info_iterator / rds_info_copy machinery and all producer
callbacks unchanged; kernel (ITER_KVEC) buffers remain unsupported on
the RDS_INFO path, as before.
I've vibe-coded a kselftest exercising both the simple options and the
RDS_INFO_* snapshot path, feel free to drop it in case this is not
useful.
Signed-off-by: Breno Leitao <leitao@debian.org>
====================
Link: https://patch.msgid.link/20260608-getsock_more-v3-0-706ecf2ea332@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert RDS socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
The RDS_INFO_* snapshot path in rds_info_getsockopt() used to pin the
userspace buffer with pin_user_pages_fast() on the raw optval address;
the info producers then memcpy into those pages under a spinlock via
kmap_atomic() and so must not fault. Obtain the same page array and
starting offset from opt->iter_out with iov_iter_extract_pages(), which
pins for write because iter_out is ITER_DEST.
The page array is preallocated here (sized with iov_iter_npages()) and
passed in, so iov_iter_extract_pages() fills it in place rather than
allocating one for us; RDS therefore keeps ownership of the array on
every return path and frees it itself. The rds_info_iterator /
rds_info_copy machinery and all producer callbacks are unchanged.
Kernel buffers (ITER_KVEC) are not page-backed in a way the info
producers can use, so the RDS_INFO path returns -EOPNOTSUPP for them;
this matches the previous behaviour, where a kernel-buffer getsockopt
hit the WARN_ONCE() path in do_sock_getsockopt() and returned
-EOPNOTSUPP. The simple RDS_RECVERR and SO_RDS_TRANSPORT options keep
working for kernel buffers via copy_to_iter().
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260608-getsock_more-v3-2-706ecf2ea332@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a kselftest that exercises the RDS getsockopt() paths converted to
the getsockopt_iter() / sockopt_t callback:
- RDS_RECVERR and SO_RDS_TRANSPORT, which return their int value through
copy_to_iter() and report the written length in opt->optlen.
- RDS_INFO_*, which obtains the userspace buffer pages with
iov_iter_extract_pages() (including a non-zero starting page offset)
and lets the info producers copy the snapshot in under a spinlock.
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260608-getsock_more-v3-1-706ecf2ea332@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vhay
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-06-10
1) xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
Propagate SKBFL_SHARED_FRAG when paged fragments are moved between
skbs so ESP can decide whether in-place crypto is safe.
2) xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload
Replace the unlocked read of xtfs->ra_newskb with a local flag so a
concurrent reassembly can no longer free first_skb between
spin_unlock and the post-loop check.
3) xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
Prune the inexact bin under xfrm_policy_lock so a concurrent
xfrm_hash_rebuild() can no longer free it before xfrm_policy_kill()
dereferences it.
4) xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
Move hrtimer_cancel() for the output and drop timers ahead of their
spinlocks, breaking the softirq/lock cycle that could deadlock
against the timer callbacks on SMP.
5) xfrm: espintcp: do not reuse an in-progress partial send
Fail a new send when espintcp_push_msgs() returns with emsg->len
still set, so a blocking caller can no longer overwrite ctx->partial
while a previous transfer still owns it.
6) esp: fix page frag reference leak on skb_to_sgvec failure
Add a flag to esp_ssg_unref() to unconditionally unref the source
scatterlist, releasing the old page references that are otherwise
leaked when the second skb_to_sgvec() in esp_output_tail() fails.
Please pull or let me know if there are problems.
ipsec-2026-06-10
* tag 'ipsec-2026-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
esp: fix page frag reference leak on skb_to_sgvec failure
xfrm: espintcp: do not reuse an in-progress partial send
xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload
xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
====================
Link: https://patch.msgid.link/20260610140800.2562818-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
addrconf_get_prefix_route() can return the fib6_null_entry sentinel
entry which has a NULL fib6_table pointer. Therefore, before setting the
route's expiration time, check that we are not working with this entry,
as otherwise a NPD will be triggered [1].
Note that the other callers of addrconf_get_prefix_route() are not
susceptible to this bug:
1. addrconf_prefix_rcv(): Requests a route with the 'RTF_ADDRCONF |
RTF_PREFIX_RT' flags which are not set on fib6_null_entry.
2. modify_prefix_route(): Fixed by commit a747e02430 ("ipv6: avoid
possible NULL deref in modify_prefix_route()").
3. __ipv6_ifa_notify(): Calls ip6_del_rt() which specifically checks for
fib6_null_entry and returns an error.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[...]
Call Trace:
<TASK>
__kasan_check_byte (mm/kasan/common.c:573)
lock_acquire.part.0 (kernel/locking/lockdep.c:5842 (discriminator 1))
_raw_spin_lock_bh (kernel/locking/spinlock.c:182 (discriminator 1))
cleanup_prefix_route (net/ipv6/addrconf.c:1280)
ipv6_del_addr (net/ipv6/addrconf.c:1342)
inet6_addr_del.isra.0 (net/ipv6/addrconf.c:3119)
inet6_rtm_deladdr (net/ipv6/addrconf.c:4812)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6997)
netlink_rcv_skb (net/netlink/af_netlink.c:2555)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1899)
__sock_sendmsg (net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Fixes: 5eb902b8e7 ("net/ipv6: Remove expired routes with a separated list of routes.")
Reported-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Reviewed-by: David Ahern <dahern@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609145448.768318-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski says:
====================
selftests: drv-net: so_txtime: trivial fixes
I noticed that so_txtime is only passing on NIPA setups which are
looped within a single host. The cross-machine cases just flat out
fail. The initial bug is obvious - the test does not deploy the binary.
But even with that I think more work would be needed to sync the
time / adjust the expectations for a dual-machine test.
Willem promised to follow up on the fundamental issues with 2-host
setups :)
v1: https://lore.kernel.org/20260608173305.372987-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20260609180803.1093428-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test needs more work, and it fails in non-obvious way
when IPv4 connectivity is not available:
# Exception| CMD[remote]: /tmp/vjquwblf/gukinuzqso_txtime -4 -c mono -t 1780939014114542914 -S None -D None a,0 -r
# Exception| EXIT: -15
Explicitly check for IPv4 support to make the future triage
less painful.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609180803.1093428-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test seems to be written with a single-host loopback
in mind. We need to deploy the binary to remote before
we run it. This is just fixing an obvious issue, but
more work will be needed to make the dual-host setup
work reliably. Most of the runs still fail with:
FAIL: start time already passed
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609180803.1093428-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiawen Wu says:
====================
net: txgbe: fix module identification
For AML devices, there are some issues where the wrong module
indentified then configure PHY failed.
The module info buffers should be initialized to 0 before the firmware
returns information. And DECLARE_PHY_INTERFACE_MASK() does not guarantee
zeroed contents, so explicitly clear the temporary interface masks before
setting supported interfaces.
Rework txgbe_identify_module() to validate module identifiers through
explicit type checks instead of relying on transceiver_type heuristics.
When using the SFP module, transceiver_type could be a random value,
because it was read from an invalid register.
====================
Link: https://patch.msgid.link/20260608070842.36504-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
DECLARE_PHY_INTERFACE_MASK() does not guarantee zeroed contents. Add a
new macro DECLARE_PHY_INTERFACE_MASK_ZERO(), make the stack variable to
be zeroed before setting supported interfaces.
Fixes: 57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260608070842.36504-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rework txgbe_identify_module() to validate module identifiers through
explicit type checks instead of relying on transceiver_type heuristics.
When using the SFP module, transceiver_type could be a random value,
because it was read from an invalid register.
Fixes: 57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260608070842.36504-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The module info buffer should be initialized to 0 before the firmware
returns information. Otherwise, there is a risk that the buffer field
not filled by the firmware is random value.
Fixes: 343929799a ("net: txgbe: Support to handle GPIO IRQs for AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260608070842.36504-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Til Kaiser says:
====================
net: mvpp2: fix XDP RX buffer handling
This is v5 of the earlier XDP_PASS fix. The XDP_PASS change is
retained, and the series also fixes related RX/XDP buffer handling
issues found during review.
Tested with tools/testing/selftests/drivers/net/xdp.py on mvpp2
hardware.
====================
Link: https://patch.msgid.link/20260607134943.21996-1-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When an XDP program uses bpf_xdp_adjust_head() or bpf_xdp_adjust_tail()
and then returns XDP_PASS, mvpp2 still builds the skb from fixed offsets
derived from the original RX descriptor. Packet geometry changes made by
the XDP program are therefore discarded before the skb reaches the stack.
Update rx_offset and rx_bytes from xdp.data and xdp.data_end for
XDP_PASS. This makes skb_reserve() and skb_put() reflect the packet seen
by XDP, and makes RX byte accounting for XDP_PASS follow the length of the
skb passed to the network stack.
Keep a separate rx_sync_size for page-pool recycling on skb allocation
failure, which must stay tied to the received buffer range.
Non-PASS verdicts continue to account the descriptor length because no skb
is passed up in those cases.
Fixes: 07dd0a7aae ("mvpp2: add basic XDP support")
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://patch.msgid.link/20260607134943.21996-5-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RX error path returns the current descriptor buffer to the hardware
BM pool. That is only valid while the driver still owns the buffer.
mvpp2_rx_refill() can fail after the current buffer has been handed to
XDP or attached to an skb. In those cases mvpp2_run_xdp() may have
recycled, redirected, or queued the page for XDP_TX, and an skb free also
retires the data buffer. Returning such a buffer to BM lets hardware DMA
into memory that is no longer owned by the RX ring.
Refill the BM pool before handing the current buffer to XDP or to the
skb. If the allocation fails there, drop the packet and return the
still-owned current buffer to BM, preserving the pool depth. Once the
refill succeeds, later local drops retire/free the current buffer instead
of returning it to BM.
Fixes: 07dd0a7aae ("mvpp2: add basic XDP support")
Fixes: d6526926de ("net: mvpp2: fix memory leak in mvpp2_rx")
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://patch.msgid.link/20260607134943.21996-4-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mvpp2 has short and long BM pools, and short pool buffers can be smaller
than PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff with
PAGE_SIZE as frame size.
XDP helpers use frame_sz to validate tail growth and to derive the hard
end of the data area. Advertising PAGE_SIZE for short buffers can let
bpf_xdp_adjust_tail() grow a packet past the real allocation, corrupting
memory or later tripping skb tailroom checks.
Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matches
the actual buffer backing the packet.
Fixes: 07dd0a7aae ("mvpp2: add basic XDP support")
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://patch.msgid.link/20260607134943.21996-3-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mvpp2 programs the RX queue packet offset, so hardware writes received
data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at
dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the
unused headroom and misses the same number of bytes at the packet tail.
On non-coherent DMA systems this can leave the CPU reading stale cache
contents for the end of the received frame.
Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range
offset so the sync covers the Marvell header and packet data actually
written by hardware.
Fixes: e1921168bb ("mvpp2: sync only the received frame")
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://patch.msgid.link/20260607134943.21996-2-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- Restore allowing writing EPP of 0 when in performance mode in the
amd-pstate driver which was unnecessarily disallowed by one of the
recent updates (Mario Limonciello)
- Remove stale documentation of the epp_cached field in struct
amd_cpudata that has been dropped recently (Zhan Xusheng)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmopns8SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1nuQH/1WWr4Rm9BV07e+sqK0X62fzV7+TpM8N
Ap7PveJ3qh7LEh2Mh4CiCyycSR4XfAZrKE0FGi7YGbxhcTsG93nlpyzz0dCPyYzM
qJ4lpbLUqt9gu4BknmTAYAIBResZSjYyA1bB7eghcKQzuAXj447PkNvG5Pbij5KS
wLuBPnV1eLtzpdXitg9OHFitu5KBKe/DH8hlsomJkkXN/8rAKIFsfihHw+52r/Hh
fwxt4QPj8e72kZbeAC+YELY40J3Cg8pW7w4G6NbGPFU64FZWwO42a2j+j1PW5unP
lYjNlf0PCQ4Ebi6Z2j24LIlp038fPJcYjV2BJ24PlY4fiN1OYoKZnLo=
=QUn3
-----END PGP SIGNATURE-----
Merge tag 'pm-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address some remaining fallout after introducing dynamic EPP
support in the amd-pstate driver during the current development cycle:
- Restore allowing writing EPP of 0 when in performance mode in the
amd-pstate driver which was unnecessarily disallowed by one of the
recent updates (Mario Limonciello)
- Remove stale documentation of the epp_cached field in struct
amd_cpudata that has been dropped recently (Zhan Xusheng)"
* tag 'pm-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Fix setting EPP in performance mode
cpufreq/amd-pstate: drop stale @epp_cached kdoc
NFT_META_BRI_IIFHWADDR declares its destination register with
len = ETH_ALEN (6 bytes), which the register-init tracking rounds up to
two 32-bit registers (8 bytes). nft_meta_bridge_get_eval() then does
memcpy(dest, br_dev->dev_addr, ETH_ALEN), writing only 6 bytes and
leaving the upper 2 bytes of the second register as uninitialised
nft_do_chain() stack. A downstream load of that register span leaks
those stale bytes to userspace.
Zero the second register before the memcpy so the full declared span is
written.
Fixes: cbd2257dc9 ("netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support")
Cc: stable@vger.kernel.org
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For NFT_FIB_RESULT_OIFNAME the destination register is declared with
len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail,
RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one
register via "*dest = 0". The remaining three registers are left as
whatever was on the stack in nft_do_chain()'s struct nft_regs, and a
downstream expression that loads the register span can leak that
uninitialised kernel stack to userspace.
The NFTA_FIB_F_PRESENT existence check has the same shape: it is only
meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type
while the eval stores a single byte via nft_reg_store8(), leaving the rest
of the declared span stale.
Fix both:
- replace the bare "*dest = 0" in the eval with nft_fib_store_result(),
which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already
used on the other early-return path), and
- restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its
destination as a single u8, so the marked span matches the one byte
the eval writes.
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Suggested-by: Florian Westphal <fw@strlen.de>
Cc: stable@vger.kernel.org
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_exthdr_init() passes user-controlled priv->len to
nft_parse_register_store(), which marks that many bytes in the
register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT
is set, the eval paths write only 1 byte (nft_reg_store8) or
4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4,
registers beyond the first are never written, retaining
uninitialized stack data from nft_regs.
Bail out if userspace requests too much data when F_PRESENT is set.
Reported-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Fixes: c078ca3b0c ("netfilter: nft_exthdr: Add support for existence check")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
