This reverts 28ee1b746f ("secure_seq: downgrade to per-host timestamp offsets")
tcp_tw_recycle went away in 2017.
Zhouyan Deng reported off-path TCP source port leakage via
SYN cookie side-channel that can be fixed in multiple ways.
One of them is to bring back TCP ports in TS offset randomization.
As a bonus, we perform a single siphash() computation
to provide both an ISN and a TS offset.
Fixes: 28ee1b746f ("secure_seq: downgrade to per-host timestamp offsets")
Reported-by: Zhouyan Deng <dengzhouyan_nwpu@163.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260302205527.1982836-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When shrinking the number of real tx queues,
netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush
qdiscs for queues which will no longer be used.
qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with
qdisc_lock(). However, for lockless qdiscs, the dequeue path is
serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so
qdisc_reset() can run concurrently with __qdisc_run() and free skbs
while they are still being dequeued, leading to UAF.
This can easily be reproduced on e.g. virtio-net by imposing heavy
traffic while frequently changing the number of queue pairs:
iperf3 -ub0 -c $peer -t 0 &
while :; do
ethtool -L eth0 combined 1
ethtool -L eth0 combined 2
done
With KASAN enabled, this leads to reports like:
BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760
...
Call Trace:
<TASK>
...
__qdisc_run+0x133f/0x1760
__dev_queue_xmit+0x248f/0x3550
ip_finish_output2+0xa42/0x2110
ip_output+0x1a7/0x410
ip_send_skb+0x2e6/0x480
udp_send_skb+0xb0a/0x1590
udp_sendmsg+0x13c9/0x1fc0
...
</TASK>
Allocated by task 1270 on cpu 5 at 44.558414s:
...
alloc_skb_with_frags+0x84/0x7c0
sock_alloc_send_pskb+0x69a/0x830
__ip_append_data+0x1b86/0x48c0
ip_make_skb+0x1e8/0x2b0
udp_sendmsg+0x13a6/0x1fc0
...
Freed by task 1306 on cpu 3 at 44.558445s:
...
kmem_cache_free+0x117/0x5e0
pfifo_fast_reset+0x14d/0x580
qdisc_reset+0x9e/0x5f0
netif_set_real_num_tx_queues+0x303/0x840
virtnet_set_channels+0x1bf/0x260 [virtio_net]
ethnl_set_channels+0x684/0xae0
ethnl_default_set_doit+0x31a/0x890
...
Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by
taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the
serialization model already used by dev_reset_queue().
Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state
reflects an empty queue, avoiding needless re-scheduling.
Fixes: 6b3ba9146f ("net: sched: allow qdiscs to handle locking")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Link: https://patch.msgid.link/20260228145307.3955532-1-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQSl+MghEFFAdY3pYJLMOmT6rpmt0gUCaaVwehMcbWtsQHBlbmd1
dHJvbml4LmRlAAoJEMw6ZPquma3SqFUA/ihDNaZuD1HDNZ6tFugz4gcvytH4LT+R
CRZXS+a1FRLyAQCuTiN1k080l4pj0sVDNlkymjxcn7a8RZ+Dk/Wy3b7JDg==
=e56S
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-7.0-20260302' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-03-02
The first 2 patches are by Oliver Hartkopp. The first fixes the
locking for CAN Broadcast Manager op runtime updates, the second fixes
the packet statisctics for the CAN dummy driver.
Alban Bedel's patch fixes a potential problem in the error path of the
mcp251x's ndo_open callback.
A patch by Ziyi Guo add USB endpoint type validation to the esd_usb
driver.
The next 6 patches are by Greg Kroah-Hartman and fix URB data parsing
for the ems_usb and ucan driver, fix URB anchoring in the etas_es58x,
and in the f81604 driver fix URB data parsing, add URB error handling
and fix URB anchoring.
A patch by me targets the gs_usb driver and fixes interoperability
with the CANable-2.5 firmware by always configuring the bit rate
before starting the device.
The last patch is by Frank Li and fixes a CHECK_DTBS warning for the
nxp,sja1000 dt-binding.
* tag 'linux-can-fixes-for-7.0-20260302' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
dt-bindings: net: can: nxp,sja1000: add reference to mc-peripheral-props.yaml
can: gs_usb: gs_can_open(): always configure bitrates before starting device
can: usb: f81604: correctly anchor the urb in the read bulk callback
can: usb: f81604: handle bulk write errors properly
can: usb: f81604: handle short interrupt urb messages properly
can: usb: etas_es58x: correctly anchor the urb in the read bulk callback
can: ucan: Fix infinite loop from zero-length messages
can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message
can: esd_usb: add endpoint type validation
can: mcp251x: fix deadlock in error path of mcp251x_open
can: dummy_can: dummy_can_init(): fix packet statistics
can: bcm: fix locking for bcm_op runtime updates
====================
Link: https://patch.msgid.link/20260302152755.1700177-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mt76 gets three almost identical new length checks
- cw1200 & ti: locking fixes
- mac80211 has a fix for the recent EML frame handling
- rsi driver no longer oddly responds to config, which
had triggered a warning in mac80211
- ath12k has two fixes for station statistics handling
-----BEGIN PGP SIGNATURE-----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=/SxR
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Some more fixes:
- mt76 gets three almost identical new length checks
- cw1200 & ti: locking fixes
- mac80211 has a fix for the recent EML frame handling
- rsi driver no longer oddly responds to config, which
had triggered a warning in mac80211
- ath12k has two fixes for station statistics handling
* tag 'wireless-2026-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mt76: Fix possible oob access in mt76_connac2_mac_write_txwi_80211()
wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211()
wifi: mt76: mt7996: Fix possible oob access in mt7996_mac_write_txwi_80211()
wifi: wlcore: Fix a locking bug
wifi: cw1200: Fix locking in error paths
wifi: mac80211: fix missing ieee80211_eml_params member initialization
wifi: rsi: Don't default to -EOPNOTSUPP in rsi_mac80211_config
wifi: ath12k: fix station lookup failure when disconnecting from AP
wifi: ath12k: use correct pdev id when requesting firmware stats
====================
Link: https://patch.msgid.link/20260304112500.169639-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
list_categories() builds a set directly from the 'category'
field of each test case. Since 'category' is a list,
set(map(...)) attempts to insert lists into a set, which
raises:
TypeError: unhashable type: 'list'
Flatten category lists and collect unique category names
using set.update() instead.
Signed-off-by: Naveen Anandhan <mr.navi8680@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To prevent timing attacks, MACs need to be compared in constant
time. Use the appropriate helper function for this.
Fixes: cfb6eeb4c8 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Fixes: 658ddaaf66 ("tcp: md5: RST: getting md5 key from listener")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260302203409.13388-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark the skge and sky2 drivers as orphan.
I no longer have any Marvell/SysKonnect boards to test with and
mail to Mirko Lindner bounced because Marvell sold off that divsion.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20260302195120.187183-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The xgbe_powerdown() and xgbe_powerup() functions use spinlocks
(spin_lock_irqsave) while calling functions that may sleep:
- napi_disable() can sleep waiting for NAPI polling to complete
- flush_workqueue() can sleep waiting for pending work items
This causes a "BUG: scheduling while atomic" error during suspend/resume
cycles on systems using the AMD XGBE Ethernet controller.
The spinlock protection in these functions is unnecessary as these
functions are called from suspend/resume paths which are already serialized
by the PM core
Fix this by removing the spinlock. Since only code that takes this lock
is xgbe_powerdown() and xgbe_powerup(), remove it completely.
Fixes: c5aa9e3b81 ("amd-xgbe: Initial AMD 10GbE platform driver")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260302042124.1386445-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sysdata_release_enabled_show() checks SYSDATA_TASKNAME instead of
SYSDATA_RELEASE, causing the configfs release_enabled attribute to
reflect the taskname feature state rather than the release feature
state. This is a copy-paste error from the adjacent
sysdata_taskname_enabled_show() function.
The corresponding _store function already uses the correct
SYSDATA_RELEASE flag.
Fixes: 343f902270 ("netconsole: implement configfs for release_enabled")
Signed-off-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260302-sysdata_release_fix-v1-1-e5090f677c7c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`struct sysctl_fib_multipath_hash_seed` contains two u32 fields
(user_seed and mp_seed), making it an 8-byte structure with a 4-byte
alignment requirement.
In `fib_multipath_hash_from_keys()`, the code evaluates the entire
struct atomically via `READ_ONCE()`:
mp_seed = READ_ONCE(net->ipv4.sysctl_fib_multipath_hash_seed).mp_seed;
While this silently works on GCC by falling back to unaligned regular
loads which the ARM64 kernel tolerates, it causes a fatal kernel panic
when compiled with Clang and LTO enabled.
Commit e35123d83e ("arm64: lto: Strengthen READ_ONCE() to acquire
when CONFIG_LTO=y") strengthens `READ_ONCE()` to use Load-Acquire
instructions (`ldar` / `ldapr`) to prevent compiler reordering bugs
under Clang LTO. Since the macro evaluates the full 8-byte struct,
Clang emits a 64-bit `ldar` instruction. ARM64 architecture strictly
requires `ldar` to be naturally aligned, thus executing it on a 4-byte
aligned address triggers a strict Alignment Fault (FSC = 0x21).
Fix the read side by moving the `READ_ONCE()` directly to the `u32`
member, which emits a safe 32-bit `ldar Wn`.
Furthermore, Eric Dumazet pointed out that `WRITE_ONCE()` on the entire
struct in `proc_fib_multipath_hash_set_seed()` is also flawed. Analysis
shows that Clang splits this 8-byte write into two separate 32-bit
`str` instructions. While this avoids an alignment fault, it destroys
atomicity and exposes a tear-write vulnerability. Fix this by
explicitly splitting the write into two 32-bit `WRITE_ONCE()`
operations.
Finally, add the missing `READ_ONCE()` when reading `user_seed` in
`proc_fib_multipath_hash_seed()` to ensure proper pairing and
concurrency safety.
Fixes: 4ee2a8cace ("net: ipv4: Add a sysctl to set multipath hash seed")
Signed-off-by: Yung Chih Su <yuuchihsu@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260302060247.7066-1-yuuchihsu@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To prevent timing attacks, MACs need to be compared in constant
time. Use the appropriate helper function for this.
Fixes: 0a3a809089 ("net/tcp: Verify inbound TCP-AO signed segments")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20260302203600.13561-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
l3mdev_master_dev_rcu() can return NULL when the slave device is being
un-slaved from a VRF. All other callers deal with this, but we lost
the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu()
with commit 4832c30d54 ("net: ipv6: put host and anycast routes on
device with address").
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418)
Call Trace:
ip6_pol_route (net/ipv6/route.c:2318)
fib6_rule_lookup (net/ipv6/fib6_rules.c:115)
ip6_route_output_flags (net/ipv6/route.c:2607)
vrf_process_v6_outbound (drivers/net/vrf.c:437)
I was tempted to rework the un-slaving code to clear the flag first
and insert synchronize_rcu() before we remove the upper. But looks like
the explicit fallback to loopback_dev is an established pattern.
And I guess avoiding the synchronize_rcu() is nice, too.
Fixes: 4832c30d54 ("net: ipv6: put host and anycast routes on device with address")
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260301194548.927324-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I was debugging a NIC driver when I noticed that when I enable
threaded busypoll, bpftrace hangs when starting up. dmesg showed:
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 10658 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 40793 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 131273 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 402058 jiffies old.
INFO: rcu_tasks detected stalls on tasks:
00000000769f52cd: .N nvcsw: 2/2 holdout: 1 idle_cpu: -1/64
task:napi/eth2-8265 state:R running task stack:0 pid:48300 tgid:48300 ppid:2 task_flags:0x208040 flags:0x00004000
Call Trace:
<TASK>
? napi_threaded_poll_loop+0x27c/0x2c0
? __pfx_napi_threaded_poll+0x10/0x10
? napi_threaded_poll+0x26/0x80
? kthread+0xfa/0x240
? __pfx_kthread+0x10/0x10
? ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
? ret_from_fork_asm+0x1a/0x30
</TASK>
The cause is that in threaded busypoll, the main loop is in
napi_threaded_poll rather than napi_threaded_poll_loop, where the
latter rarely iterates more than once within its loop. For
rcu_softirq_qs_periodic inside napi_threaded_poll_loop to report its
qs state, the last_qs must be 100ms behind, and this can't happen
because napi_threaded_poll_loop rarely iterates in threaded busypoll,
and each time napi_threaded_poll_loop is called last_qs is reset to
latest jiffies.
This patch changes so that in threaded busypoll, last_qs is saved
in the outer napi_threaded_poll, and whether busy_poll_last_qs
is NULL indicates whether napi_threaded_poll_loop is called for
busypoll. This way last_qs would not reset to latest jiffies on
each invocation of napi_threaded_poll_loop.
Fixes: c18d4b190a ("net: Extend NAPI threaded polling to allow kthread based busy polling")
Cc: stable@vger.kernel.org
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20260227221937.1060857-1-zhuyifei@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot reported a circular locking dependency in rds_tcp_tune() where
sk_net_refcnt_upgrade() is called while holding the socket lock:
======================================================
WARNING: possible circular locking dependency detected
======================================================
kworker/u10:8/15040 is trying to acquire lock:
ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0},
at: __kmalloc_cache_noprof+0x4b/0x6f0
but task is already holding lock:
ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0},
at: rds_tcp_tune+0xd7/0x930
The issue occurs because sk_net_refcnt_upgrade() performs memory
allocation (via get_net_track() -> ref_tracker_alloc()) while the
socket lock is held, creating a circular dependency with fs_reclaim.
Fix this by moving sk_net_refcnt_upgrade() outside the socket lock
critical section. This is safe because the fields modified by the
sk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are not
accessed by any concurrent code path at this point.
v2:
- Corrected fixes tag
- check patch line wrap nits
- ai commentary nits
Reported-by: syzbot+2e2cf5331207053b8106@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2e2cf5331207053b8106
Fixes: 3a58f13a88 ("net: rds: acquire refcount on TCP sockets")
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260227202336.167757-1-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Check frame length before accessing the mgmt fields in
mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob
access.
Fixes: 577dbc6c65 ("mt76: mt7915: enable offloading of sequence number assignment")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-3-b0f6d1ad4850@kernel.org
[fix check to also cover mgmt->u.action.u.addba_req.capab,
correct Fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Check frame length before accessing the mgmt fields in
mt7925_mac_write_txwi_80211 in order to avoid a possible oob access.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-2-b0f6d1ad4850@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Check frame length before accessing the mgmt fields in
mt7996_mac_write_txwi_80211 in order to avoid a possible oob access.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-1-b0f6d1ad4850@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix issues with ath12k station statistics requests.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaaWv9gAKCRAsFbugiYzL
e0rCAQDBvfi6748qu6mWXLN9c74kG1aOFWlk7C4YTmVeOqANngD+OXSuJs01kOBS
dZAPzahSNZz3F7zcuolYDxxOE3J8DwQ=
=dQ5e
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20260302' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v7.0-rc3
Fix issues with ath12k station statistics requests.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make sure that wl->mutex is locked before it is unlocked. This has been
detected by the Clang thread-safety analyzer.
Fixes: 45aa7f071b ("wlcore: Use generic runtime pm calls for wowlan elp configuration")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223220102.2158611-26-bart.vanassche@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cw1200_wow_suspend() must only return with priv->conf_mutex locked if it
returns zero. This mutex must be unlocked if an error is returned. Add
mutex_unlock() calls to the error paths from which that call is missing.
This has been detected by the Clang thread-safety analyzer.
Fixes: a910e4a94f ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223220102.2158611-25-bart.vanassche@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Vimlesh Kumar says:
====================
avoid compiler and IQ/OQ reordering
Utilize READ_ONCE and WRITE_ONCE APIs to prevent compiler
optimization and reordering. Ensure IO queue OUT/IN_CNT
registers are flushed. Relocate IQ/OQ IN/OUT_CNTS updates
to occur before NAPI completion, and replace napi_complete
with napi_complete_done.
====================
Link: https://patch.msgid.link/20260227091402.1773833-1-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx
variable access to prevent compiler optimization and reordering.
Additionally, ensure IO queue OUT/IN_CNT registers are flushed
by performing a read-back after writing.
The compiler could reorder reads/writes to pkts_pending, last_pkt_count,
etc., causing stale values to be used when calculating packets to process
or register updates to send to hardware. The Octeon hardware requires a
read-back after writing to OUT_CNT/IN_CNT registers to ensure the write
has been flushed through any posted write buffers before the interrupt
resend bit is set. Without this, we have observed cases where the hardware
didn't properly update its internal state.
wmb/rmb only provides ordering guarantees but doesn't prevent the compiler
from performing optimizations like caching in registers, load tearing etc.
Fixes: 1cd3b40797 ("octeon_ep_vf: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-5-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Relocate IQ/OQ IN/OUT_CNTS updates to occur before NAPI completion.
Moving the IQ/OQ counter updates before napi_complete_done ensures
1. Counter registers are updated before re-enabling interrupts.
2. Prevents a race where new packets arrive but counters aren't properly
synchronized.
Fixes: 1cd3b40797 ("octeon_ep_vf: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-4-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx
variable access to prevent compiler optimization and reordering.
Additionally, ensure IO queue OUT/IN_CNT registers are flushed
by performing a read-back after writing.
The compiler could reorder reads/writes to pkts_pending, last_pkt_count,
etc., causing stale values to be used when calculating packets to process
or register updates to send to hardware. The Octeon hardware requires a
read-back after writing to OUT_CNT/IN_CNT registers to ensure the write
has been flushed through any posted write buffers before the interrupt
resend bit is set. Without this, we have observed cases where the hardware
didn't properly update its internal state.
wmb/rmb only provides ordering guarantees but doesn't prevent the compiler
from performing optimizations like caching in registers, load tearing etc.
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-3-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Relocate IQ/OQ IN/OUT_CNTS updates to occur before NAPI completion,
and replace napi_complete with napi_complete_done.
Moving the IQ/OQ counter updates before napi_complete_done ensures
1. Counter registers are updated before re-enabling interrupts.
2. Prevents a race where new packets arrive but counters aren't properly
synchronized.
napi_complete_done (vs napi_complete) allows for better
interrupt coalescing.
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-2-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiayuan Chen says:
====================
bonding: fix missing XDP compat check on xmit_hash_policy change
syzkaller reported a bug https://syzkaller.appspot.com/bug?extid=5a287bcdc08104bc3132
When a bond device is in 802.3ad or balance-xor mode, XDP is supported
only when xmit_hash_policy != vlan+srcmac. This constraint is enforced
in bond_option_mode_set() via bond_xdp_check(), which prevents switching
to an XDP-incompatible mode while a program is loaded. However, the
symmetric path -- changing xmit_hash_policy while XDP is loaded -- had
no such guard in bond_option_xmit_hash_policy_set().
This means the following sequence silently creates an inconsistent state:
1. Create a bond in 802.3ad mode with xmit_hash_policy=layer2+3.
2. Attach a native XDP program to the bond.
3. Change xmit_hash_policy to vlan+srcmac (no error, not checked).
Now bond->xdp_prog is set but bond_xdp_check() returns false for the
same device. When the bond is later torn down (e.g. netns deletion),
dev_xdp_uninstall() calls bond_xdp_set(dev, NULL) to remove the
program, which hits the bond_xdp_check() guard and returns -EOPNOTSUPP,
triggering a kernel WARNING:
bond1 (unregistering): Error: No native XDP support for the current bonding mode
------------[ cut here ]------------
dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL)
WARNING: net/core/dev.c:10361 at dev_xdp_uninstall net/core/dev.c:10361 [inline], CPU#0: kworker/u8:22/11031
Modules linked in:
CPU: 0 UID: 0 PID: 11031 Comm: kworker/u8:22 Not tainted syzkaller #0 PREEMPT(full)
Workqueue: netns cleanup_net
RIP: 0010:dev_xdp_uninstall net/core/dev.c:10361 [inline]
RIP: 0010:unregister_netdevice_many_notify+0x1efd/0x2370 net/core/dev.c:12393
RSP: 0018:ffffc90003b2f7c0 EFLAGS: 00010293
RAX: ffffffff8971e99c RBX: ffff888052f84c40 RCX: ffff88807896bc80
RDX: 0000000000000000 RSI: 00000000ffffffa1 RDI: 0000000000000000
RBP: ffffc90003b2f930 R08: ffffc90003b2f207 R09: 1ffff92000765e40
R10: dffffc0000000000 R11: fffff52000765e41 R12: 00000000ffffffa1
R13: ffff888052f84c38 R14: 1ffff1100a5f0988 R15: ffffc9000df67000
FS: 0000000000000000(0000) GS:ffff8881254ae000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f60871d5d58 CR3: 000000006c41c000 CR4: 00000000003526f0
Call Trace:
<TASK>
ops_exit_rtnl_list net/core/net_namespace.c:187 [inline]
ops_undo_list+0x3d3/0x940 net/core/net_namespace.c:248
cleanup_net+0x56b/0x800 net/core/net_namespace.c:704
process_one_work kernel/workqueue.c:3275 [inline]
process_scheduled_works+0xaec/0x17a0 kernel/workqueue.c:3358
worker_thread+0xa50/0xfc0 kernel/workqueue.c:3439
kthread+0x388/0x470 kernel/kthread.c:467
ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Beyond the WARNING itself, when dev_xdp_install() fails during
dev_xdp_uninstall(), bond_xdp_set() returns early without calling
bpf_prog_put() on the old program. dev_xdp_uninstall() then releases
only the reference held by dev->xdp_state[], while the reference held
by bond->xdp_prog is never dropped, leaking the struct bpf_prog.
The fix refactors the core logic of bond_xdp_check() into a new helper
__bond_xdp_check_mode(mode, xmit_policy) that takes both parameters
explicitly, avoiding the need to read them from the bond struct.
bond_xdp_check() becomes a thin wrapper around it.
bond_option_xmit_hash_policy_set() then uses __bond_xdp_check_mode()
directly, passing the candidate xmit_policy before it is committed,
mirroring exactly what bond_option_mode_set() already does for mode
changes.
Patch 1 adds the kernel fix.
Patch 2 adds a selftest that reproduces the WARNING by attaching native
XDP to a bond in 802.3ad mode, then attempting to change xmit_hash_policy
to vlan+srcmac -- verifying the change is rejected with the fix applied.
====================
Link: https://patch.msgid.link/20260226080306.98766-1-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a selftest to verify that changing xmit_hash_policy to vlan+srcmac
is rejected when a native XDP program is loaded on a bond in 802.3ad
mode. Without the fix in bond_option_xmit_hash_policy_set(), the change
succeeds silently, creating an inconsistent state that triggers a kernel
WARNING in dev_xdp_uninstall() when the bond is torn down.
The test attaches native XDP to a bond0 (802.3ad, layer2+3), then
attempts to switch xmit_hash_policy to vlan+srcmac and asserts the
operation fails. It also verifies the change succeeds after XDP is
detached, confirming the rejection is specific to the XDP-loaded state.
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260226080306.98766-3-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d59 ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017e ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected.
Reported-by: syzbot+5a287bcdc08104bc3132@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6995aff6.050a0220.2eeac1.014e.GAE@google.com/T/
Fixes: 39a0876d59 ("net, bonding: Disallow vlan+srcmac with XDP")
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260226080306.98766-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The missing initialization causes driver to misinterpret the EML control bitmap,
resulting in incorrect link bitmap handling.
Fixes: 0d95280a2d ("wifi: mac80211: Add eMLSR/eMLMR action frame parsing support")
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260303054725.471548-1-MeiChia.Chiu@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 1cc93c48b5 ("selftests/net: packetdrill: remove tests for
tcp_rcv_*big") removed the test for the reverted commit 1d2fbaad7c
("tcp: stronger sk_rcvbuf checks") but also the one for commit
9ca48d616e ("tcp: do not accept packets beyond window").
Restore the test with the necessary adaptation: expect a delayed ACK
instead of an immediate one, since tcp_can_ingest() does not fail
anymore for the last data packet.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Link: https://patch.msgid.link/20260301-tcp_rcv_big_endseq-v1-1-86ab7415ab58@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Function rtl8365mb_phy_ocp_write() always returns 0, even when an error
occurs during register access. This patch fixes the return value to
propagate the actual error code from regmap operations.
Link: https://lore.kernel.org/netdev/a2dfde3c-d46f-434b-9d16-1e251e449068@yahoo.com/
Fixes: 2796728460 ("net: dsa: realtek: rtl8365mb: serialize indirect PHY register access")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260301-realtek_namiltd_fix1-v1-1-43a6bb707f9c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This triggers a WARN_ON in ieee80211_hw_conf_init and isn't the expected
behavior from the driver - other drivers default to 0 too.
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Link: https://patch.msgid.link/20260221-rsi-config-ret-v1-1-9a8f805e2f31@puri.sm
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a reference to mc-peripheral-props.yaml to allow vendor-specific
properties for memory access timings.
Fix below CHECK_DTBS warings:
arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dtb: can@4,0 (nxp,sja1000): Unevaluated properties are not allowed ('fsl,weim-cs-timing' was unexpected)
from schema $id: http://devicetree.org/schemas/net/can/nxp,sja1000.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212163000.1195586-1-Frank.Li@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
So far the driver populated the struct can_priv::do_set_bittiming() and
struct can_priv::fd::do_set_data_bittiming() callbacks.
Before bringing up the interface, user space has to configure the bitrates.
With these callbacks the configuration is directly forwarded into the CAN
hardware. Then the interface can be brought up.
An ifdown-ifup cycle (without changing the bit rates) doesn't re-configure
the bitrates in the CAN hardware. This leads to a problem with the
CANable-2.5 [1] firmware, which resets the configured bit rates during
ifdown.
To fix the problem remove both bit timing callbacks and always configure
the bitrates in the struct net_device_ops::ndo_open() callback.
[1] https://github.com/Elmue/CANable-2.5-firmware-Slcan-and-Candlelight
Cc: stable@vger.kernel.org
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://patch.msgid.link/20260219-gs_usb-always-configure-bitrates-v2-1-671f8ba5b0a5@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In this series Greg Kroah-Hartman takes the recent fixes on the gs_usb
driver and applies similar fixes to the f81604 driver.
Link: https://patch.msgid.link/2026022331-opal-evaluator-a928@gregkh
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also.
Cc: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022334-starlight-scaling-2cea@gregkh
Fixes: 88da174369 ("can: usb: f81604: add Fintek F81604 support")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If a write urb fails then more needs to be done other than just logging
the message, otherwise the transmission could be stalled. Properly
increment the error counters and wake up the queues so that data will
continue to flow.
Cc: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022334-slackness-dynamic-9195@gregkh
Fixes: 88da174369 ("can: usb: f81604: add Fintek F81604 support")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If an interrupt urb is received that is not the correct length, properly
detect it and don't attempt to treat the data as valid.
Cc: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022331-opal-evaluator-a928@gregkh
Fixes: 88da174369 ("can: usb: f81604: add Fintek F81604 support")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also.
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Tested-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/2026022320-poser-stiffly-9d84@gregkh
Fixes: 8537257874 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If a broken ucan device gets a message with the message length field set
to 0, then the driver will loop for forever in
ucan_read_bulk_callback(), hanging the system. If the length is 0, just
skip the message and go on to the next one.
This has been fixed in the kvaser_usb driver in the past in commit
0c73772cd2 ("can: kvaser_usb: leaf: Fix potential infinite loop in
command parsers"), so there must be some broken devices out there like
this somewhere.
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022319-huff-absurd-6a18@gregkh
Fixes: 9f2d3eae88 ("can: ucan: add driver for Theobroma Systems UCAN devices")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When looking at the data in a USB urb, the actual_length is the size of
the buffer passed to the driver, not the transfer_buffer_length which is
set by the driver as the max size of the buffer.
When parsing the messages in ems_usb_read_bulk_callback() properly check
the size both at the beginning of parsing the message to make sure it is
big enough for the expected structure, and at the end of the message to
make sure we don't overflow past the end of the buffer for the next
message.
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022316-answering-strainer-a5db@gregkh
Fixes: 702171adee ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
esd_usb_probe() constructs bulk pipes for two endpoints without
verifying their transfer types:
- usb_rcvbulkpipe(dev->udev, 1) for RX (version reply, async RX data)
- usb_sndbulkpipe(dev->udev, 2) for TX (version query, CAN frames)
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes, triggering the WARNING in
usb_submit_urb().
Use usb_find_common_endpoints() to discover and validate the first
bulk IN and bulk OUT endpoints at probe time, before any allocation.
Found pipes are saved to struct esd_usb and code uses them directly
instead of making pipes in place.
Similar to
- commit 136bed0bfd ("can: mcba_usb: properly check endpoint type")
which established the usb_find_common_endpoints() + stored pipes
pattern for CAN USB drivers.
Fixes: 96d8e90382 ("can: Add driver for esd CAN-USB/2 device")
Suggested-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260213203927.599163-1-n7l8m4@u.northwestern.edu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The mcp251x_open() function call free_irq() in its error path with the
mpc_lock mutex held. But if an interrupt already occurred the
interrupt handler will be waiting for the mpc_lock and free_irq() will
deadlock waiting for the handler to finish.
This issue is similar to the one fixed in commit 7dd9c26bd6 ("can:
mcp251x: fix deadlock if an interrupt occurs during mcp251x_open") but
for the error path.
To solve this issue move the call to free_irq() after the lock is
released. Setting `priv->force_quit = 1` beforehand ensure that the IRQ
handler will exit right away once it acquired the lock.
Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260209144706.2261954-1-alban.bedel@lht.dlh.de
Fixes: bf66f3736a ("can: mcp251x: Move to threaded interrupts instead of workqueues.")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The former implementation was only counting the tx_packets value but not
the tx_bytes as the skb was dropped on driver layer.
Enable CAN echo support (IFF_ECHO) in dummy_can_init(), which activates the
code for setting and retrieving the echo SKB and counts the tx_bytes
correctly.
Fixes: 816cf430e8 ("can: add dummy_can driver")
Cc: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260126104540.21024-1-socketcan@hartkopp.net
[mkl: make commit message imperative]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit c2aba69d0c ("can: bcm: add locking for bcm_op runtime updates")
added a locking for some variables that can be modified at runtime when
updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup().
Usually the RX_SETUP only handles and filters incoming traffic with one
exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is
sent when a specific RTR frame is received. Therefore the rx bcm_op uses
bcm_can_tx() which uses the bcm_tx_lock that was only initialized in
bcm_tx_setup(). Add the missing spin_lock_init() when allocating the
bcm_op in bcm_rx_setup() to handle the RTR case properly.
Fixes: c2aba69d0c ("can: bcm: add locking for bcm_op runtime updates")
Reported-by: syzbot+5b11eccc403dd1cea9f8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/699466e4.a70a0220.2c38d7.00ff.GAE@google.com/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260218-bcm_spin_lock_init-v1-1-592634c8a5b5@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
