mirror of
https://github.com/torvalds/linux.git
synced 2026-07-29 10:41:49 +02:00
f692a6c690
1325320 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
f692a6c690 |
Tracing fixes for 6.13:
- Fix a regression in the irqsoff and wakeup latency tracing The function graph tracer infrastructure has become generic so that fprobes and BPF can be based on it. As it use to only handle function graph tracing, it would always calculate the time the function entered so that it could then calculate the time it exits and give the length of time the function executed for. But this is not needed for the other users (fprobes and BPF) and reading the clock adds a non-negligible overhead, so the calculation was moved into the function graph tracer logic. But the irqsoff and wakeup latency tracers, when the "display-graph" option was set, would use the function graph tracer to calculate the times of functions during the latency. The movement of the calltime calculation made the value zero for these tracers, and the output no longer showed the length of time of each tracer, but instead the absolute timestamp of when the function returned (rettime - calltime where calltime is now zero). Have the irqsoff and wakeup latency tracers also do the calltime calculation as the function graph tracer does and report the proper length of the function timings. - Update the tracing display to reflect the new preempt lazy model When the system is configured with preempt lazy, the output of the trace data would state "unknown" for the current preemption model. Because the lazy preemption model was just added, make it known to the tracing subsystem too. This is just a one line change. - Document multiple function graph having slightly different timings Now that function graph tracer infrastructure is separate, this also allows the function graph tracer to run in multiple instances (it wasn't able to do so before). If two instances ran the function graph tracer and traced the same functions, the timings for them will be slightly different because each does their own timings and collects the timestamps differently. Document this to not have people be confused by it. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ4kcvhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qnaPAPwPrZraRcXCF2SvWfF6aJ/hSVzy7XgM mj7FDlkw57QlVgD/cy/g8czLQ38hAqNULP+tvPc6mPSHptV8yOTKaWuVFgg= =N7/a -----END PGP SIGNATURE----- Merge tag 'trace-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix a regression in the irqsoff and wakeup latency tracing The function graph tracer infrastructure has become generic so that fprobes and BPF can be based on it. As it use to only handle function graph tracing, it would always calculate the time the function entered so that it could then calculate the time it exits and give the length of time the function executed for. But this is not needed for the other users (fprobes and BPF) and reading the clock adds a non-negligible overhead, so the calculation was moved into the function graph tracer logic. But the irqsoff and wakeup latency tracers, when the "display-graph" option was set, would use the function graph tracer to calculate the times of functions during the latency. The movement of the calltime calculation made the value zero for these tracers, and the output no longer showed the length of time of each tracer, but instead the absolute timestamp of when the function returned (rettime - calltime where calltime is now zero). Have the irqsoff and wakeup latency tracers also do the calltime calculation as the function graph tracer does and report the proper length of the function timings. - Update the tracing display to reflect the new preempt lazy model When the system is configured with preempt lazy, the output of the trace data would state "unknown" for the current preemption model. Because the lazy preemption model was just added, make it known to the tracing subsystem too. This is just a one line change. - Document multiple function graph having slightly different timings Now that function graph tracer infrastructure is separate, this also allows the function graph tracer to run in multiple instances (it wasn't able to do so before). If two instances ran the function graph tracer and traced the same functions, the timings for them will be slightly different because each does their own timings and collects the timestamps differently. Document this to not have people be confused by it. * tag 'trace-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ftrace: Document that multiple function_graph tracing may have different times tracing: Print lazy preemption model tracing: Fix irqsoff and wakeup latency tracers when using function graph |
||
|
Linus Torvalds
|
ce69b40190 |
Current release - regressions:
- core: avoid CFI problems with sock priv helpers
- xsk: bring back busy polling support
- netpoll: ensure skb_pool list is always initialized
Current release - new code bugs:
- core: make page_pool_ref_netmem work with net iovs
- ipv4: route: fix drop reason being overridden in ip_route_input_slow
- udp: make rehash4 independent in udp_lib_rehash()
Previous releases - regressions:
- bpf: fix bpf_sk_select_reuseport() memory leak
- openvswitch: fix lockup on tx to unregistering netdev with carrier
- mptcp: be sure to send ack when mptcp-level window re-opens
- eth: bnxt: always recalculate features after XDP clearing, fix null-deref
- eth: mlx5: fix sub-function add port error handling
- eth: fec: handle page_pool_dev_alloc_pages error
Previous releases - always broken:
- vsock: some fixes due to transport de-assignment
- eth: ice: fix E825 initialization
- eth: mlx5e: fix inversion dependency warning while enabling IPsec tunnel
- eth: gtp: destroy device along with udp socket's netns dismantle.
- eth: xilinx: axienet: Fix IRQ coalescing packet count overflow
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=EtnO
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Notably this includes fixes for a few regressions spotted very
recently. No known outstanding ones.
Current release - regressions:
- core: avoid CFI problems with sock priv helpers
- xsk: bring back busy polling support
- netpoll: ensure skb_pool list is always initialized
Current release - new code bugs:
- core: make page_pool_ref_netmem work with net iovs
- ipv4: route: fix drop reason being overridden in
ip_route_input_slow
- udp: make rehash4 independent in udp_lib_rehash()
Previous releases - regressions:
- bpf: fix bpf_sk_select_reuseport() memory leak
- openvswitch: fix lockup on tx to unregistering netdev with carrier
- mptcp: be sure to send ack when mptcp-level window re-opens
- eth:
- bnxt: always recalculate features after XDP clearing, fix
null-deref
- mlx5: fix sub-function add port error handling
- fec: handle page_pool_dev_alloc_pages error
Previous releases - always broken:
- vsock: some fixes due to transport de-assignment
- eth:
- ice: fix E825 initialization
- mlx5e: fix inversion dependency warning while enabling IPsec
tunnel
- gtp: destroy device along with udp socket's netns dismantle.
- xilinx: axienet: Fix IRQ coalescing packet count overflow"
* tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netdev: avoid CFI problems with sock priv helpers
net/mlx5e: Always start IPsec sequence number from 1
net/mlx5e: Rely on reqid in IPsec tunnel mode
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
net/mlx5: Clear port select structure when fail to create
net/mlx5: SF, Fix add port error handling
net/mlx5: Fix a lockdep warning as part of the write combining test
net/mlx5: Fix RDMA TX steering prio
net: make page_pool_ref_netmem work with net iovs
net: ethernet: xgbe: re-add aneg to supported features in PHY quirks
net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII
net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband
selftests: net: Adapt ethtool mq tests to fix in qdisc graft
net: fec: handle page_pool_dev_alloc_pages error
net: netpoll: ensure skb_pool list is always initialized
net: xilinx: axienet: Fix IRQ coalescing packet count overflow
nfp: bpf: prevent integer overflow in nfp_bpf_event_output()
selftests: mptcp: avoid spurious errors on disconnect
mptcp: fix spurious wake-up on under memory pressure
mptcp: be sure to send ack when mptcp-level window re-opens
...
|
||
|
Linus Torvalds
|
6b4ccf11fa |
Power management fixes for final 6.13
Update the documentation of cpuidle governors that does not match the code any more after previous functional changes (Rafael Wysocki) and fix up the cpufreq Kconfig file broken inadvertently by a previous update (Viresh Kumar). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmeJGhcSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxOOsP/0ApuqVBJHC4ib6Ay+Ja50pq0Ud2lhWO 9pUGB7d3/MHAoViuAeh0Mjx4SKGQ3zCNnlAsqjMWqzwITPFPP33qbOoaDWscE2r4 2ePcE6hjcZ9cKi/0NQ5lssWdOgpGTV4P9cU0VqDyVc61SRrcY5n1fiFmsglaMDX8 pS0lySfykQ4zI2m+mkLLOqAUdbPZSFeWZrDgW3zwv3vcncXXudHRcKkPHFJkyhIF W/s3MQiqY+Bs16hT1YEMeVCSrLCTWLB2W11/mgjz8tnvGY4R5jk/DPXtVNcr/0xd aHoaYJbpBx2Y72KmEePN2aFFQPHC+2mIgqVSrBvxyn5ADqKLfIYxPC6LtX9HMDts YMkQycsQdRan9mpxE7wEqTKzigQJHTJVirqrxW9qrFTFbnelpe1AtgA3LJaP1mjP AHkASzmVVRdKN8AERrWIpVGy/qVsSIox9vaUfuwHJJyPQpbxrjcT11sT9VnulliD m8y9E3BORpwR5A3n/JkyM6c6JX7UCHgMMCCT3n88iDMRmr/0GfSUth27UH3dLaDj uaqXBgHVdpu98nII396K/FLtQ8dcr9tgJQaK5qdubRldVVeDvqmlpVWH+npVP2+Q wlOpZkjBNmKVynziaymkgnUnzoWLGv/i57Mx6T1hgwJN6pnrur3qCGSNi73sMEwr NmmvebjpGJQO =zMmu -----END PGP SIGNATURE----- Merge tag 'pm-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Update the documentation of cpuidle governors that does not match the code any more after previous functional changes (Rafael Wysocki) and fix up the cpufreq Kconfig file broken inadvertently by a previous update (Viresh Kumar)" * tag 'pm-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Move endif to the end of Kconfig file cpuidle: teo: Update documentation after previous changes cpuidle: menu: Update documentation after previous changes |
||
|
Linus Torvalds
|
5d5c478759 |
ACPI fix for final 6.13
Prevent acpi_video_device_EDID() from returning a pointer to a memory region that should not be passed to kfree() which causes one of its users to crash randomly on attempts to free it (Chris Bainbridge). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmeJF6YSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxqbgQAIdwiU/kLnvhIxfgOpaqMtAWxlpwmMyU qXmBNrvrW0CueMy2lCCKQZbVcyxxzvZigV8eW1rdmx+ISfI3fPTFeroqK+XHMl6z +izohhWVKj3hCormkefOLuqh1TnJsM0OVYVVJrQZ4CrewunCzG7mR72qaJnk+98x LQuSOCIbAe7AChAEW1Ydg1I2oWcwz4HUdixkJse5F3h8M51ZhwyoUZsRvk2fIIVA pfcZw2yz9bidCzUuhP54pfVwVItngCe9AwUu7/gDUXCAtxyMQrMn5ppDSmYhCHxc BSACmcDdJzOOcwoBRbsaYJrc33zRXH8NmXK3ekZLb3FgozDmuT01lvsn+tGay/zR Ektk0d0uSLLDfaXdO4IycuEtngINkO7R43J4TiT5QufN+HLJz3Ru+0/cGe3YkSae WLu+N3ZDnpA9CDT4A/eEL6taabZfgN2FIKNq+OuKdhb9sogrcrN2U6R5RvIWZipN +Xgwg1euRrmAfjDZngvpDRVMTYywl8PYoGdoYKMDHlLU6ftzK+5d59juBXVsoze8 8IUUgszkNcqunMj+V3GlnRmu6LlTpRQinArFU+DKf3/YQvqr+l9V8IDjiiFiQh6N P2BPUlKTl3LgiY2vNvztxQK504cim78Xwe2U+rwngJS6y2SiGldkwwxSzILAsVA2 YIbY9jfQeTlF =7/13 -----END PGP SIGNATURE----- Merge tag 'acpi-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent acpi_video_device_EDID() from returning a pointer to a memory region that should not be passed to kfree() which causes one of its users to crash randomly on attempts to free it (Chris Bainbridge)" * tag 'acpi-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Fix random crashes due to bad kfree() |
||
|
Linus Torvalds
|
ed8fd8d5dd |
for-6.13-rc7-tag
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmeI5MAACgkQxWXV+ddt WDtMIg//WwV2p/gQmFMfFu7txZQQrt6m6nMuq/2y0qAA+d2e9oXFr3jNLlho0RwL hvSM5IEsxzL1ujh67tqxUBojvRjq+CRwiI6fxFO13dLIMrlKoiINtuOEiIhgZr/Q K+weXC4yHCFSB4q82dcr5i++/GVdY8wBoLHGe4zdJ0TVtM0xHrYVQ/4PXAGMX97V Bmv038aAMpRJTxJ6rcObloNxOb+WoyM0DIRbJ2UWVmy+bOLHMEa/jSkkQDWwcuPV UJjQgXz21FXiJqhtcndM58mEsKfe1WV9gG3lihedyb/xNeCPggqkDbfSzZU55Lkm vRXSgklbkifK6RTqrozg7e38MV+rZMwwNzqysMxNtlvrC5R+0A6of4t2Ny1vaeGG flcVncbLi/ip9J4fMLUpVS0fbAZjQgIJca6fbgM7Ajdzvm9rIDGpR078GW1zDlg2 20f7isQWqSkj3i9kPElGbDT65RvcxR5EpJQfwr78+bsgSsyBGwghhAJ5F7vqZh5L wdmJOYxkwq5r1YxeuEQPVv404WPrwZE2Gyk6TGXkzpA+l6isCViY3NTyQPBOMH9y 2GEelW61QSKtc5BPp1h85Aw74wtSCpGkCY+t/v03oQ6PBssWIsVcXZ7NnjJh9+72 U+JY0H7UPyyczEzicEGlwWYBWs2/KeBuCrladNCkv3S5TWgB5yQ= =sF6v -----END PGP SIGNATURE----- Merge tag 'for-6.13-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: - handle d_path() errors when canonicalizing device mapper paths during device scan * tag 'for-6.13-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: add the missing error handling inside get_canonical_dev_path |
||
|
Rafael J. Wysocki
|
3744b08449 |
Merge branch 'pm-cpufreq'
Merge a cpufreq fix for 6.13: - Fix cpufreq Kconfig breakage after previous changes (Viresh Kumar). * pm-cpufreq: cpufreq: Move endif to the end of Kconfig file |
||
|
Jakub Kicinski
|
a50da36562 |
netdev: avoid CFI problems with sock priv helpers
Li Li reports that casting away callback type may cause issues
for CFI. Let's generate a small wrapper for each callback,
to make sure compiler sees the anticipated types.
Reported-by: Li Li <dualli@chromium.org>
Link: https://lore.kernel.org/CANBPYPjQVqmzZ4J=rVQX87a9iuwmaetULwbK_5_3YWk2eGzkaA@mail.gmail.com
Fixes:
|
||
|
Paolo Abeni
|
676d53a480 |
Merge branch 'mlx5-misc-fixes-2025-01-15'
Tariq Toukan says: ==================== mlx5 misc fixes 2025-01-15 This patchset provides misc bug fixes from the team to the mlx5 core and Eth drivers. ==================== Link: https://patch.msgid.link/20250115113910.1990174-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Leon Romanovsky
|
7f95b02477 |
net/mlx5e: Always start IPsec sequence number from 1
According to RFC4303, section "3.3.3. Sequence Number Generation",
the first packet sent using a given SA will contain a sequence
number of 1.
This is applicable to both ESN and non-ESN mode, which was not covered
in commit mentioned in Fixes line.
Fixes:
|
||
|
Leon Romanovsky
|
25f23524df |
net/mlx5e: Rely on reqid in IPsec tunnel mode
All packet offloads SAs have reqid in it to make sure they have
corresponding policy. While it is not strictly needed for transparent
mode, it is extremely important in tunnel mode. In that mode, policy and
SAs have different match criteria.
Policy catches the whole subnet addresses, and SA catches the tunnel gateways
addresses. The source address of such tunnel is not known during egress packet
traversal in flow steering as it is added only after successful encryption.
As reqid is required for packet offload and it is unique for every SA,
we can safely rely on it only.
The output below shows the configured egress policy and SA by strongswan:
[leonro@vm ~]$ sudo ip x s
src 192.169.101.2 dst 192.169.101.1
proto esp spi 0xc88b7652 reqid 1 mode tunnel
replay-window 0 flag af-unspec esn
aead rfc4106(gcm(aes)) 0xe406a01083986e14d116488549094710e9c57bc6 128
anti-replay esn context:
seq-hi 0x0, seq 0x0, oseq-hi 0x0, oseq 0x0
replay_window 1, bitmap-length 1
00000000
crypto offload parameters: dev eth2 dir out mode packet
[leonro@064 ~]$ sudo ip x p
src 192.170.0.0/16 dst 192.170.0.0/16
dir out priority 383615 ptype main
tmpl src 192.169.101.2 dst 192.169.101.1
proto esp spi 0xc88b7652 reqid 1 mode tunnel
crypto offload parameters: dev eth2 mode packet
Fixes:
|
||
|
Leon Romanovsky
|
2c3688090f |
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
Attempt to enable IPsec packet offload in tunnel mode in debug kernel
generates the following kernel panic, which is happening due to two
issues:
1. In SA add section, the should be _bh() variant when marking SA mode.
2. There is not needed flush_workqueue in SA delete routine. It is not
needed as at this stage as it is removed from SADB and the running work
will be canceled later in SA free.
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.12.0+ #4 Not tainted
-----------------------------------------------------
charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire:
ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
and this task is already holding:
ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
which would create a new lock dependency:
(&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&x->lock){+.-.}-{3:3}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
hrtimer_run_softirq+0x146/0x2e0
handle_softirqs+0x266/0x860
irq_exit_rcu+0x115/0x1a0
sysvec_apic_timer_interrupt+0x6e/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
default_idle+0x13/0x20
default_idle_call+0x67/0xa0
do_idle+0x2da/0x320
cpu_startup_entry+0x50/0x60
start_secondary+0x213/0x2a0
common_startup_64+0x129/0x138
to a SOFTIRQ-irq-unsafe lock:
(&xa->xa_lock#24){+.+.}-{3:3}
... which became SOFTIRQ-irq-unsafe at:
...
lock_acquire+0x1be/0x520
_raw_spin_lock+0x2c/0x40
xa_set_mark+0x70/0x110
mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&xa->xa_lock#24);
local_irq_disable();
lock(&x->lock);
lock(&xa->xa_lock#24);
<Interrupt>
lock(&x->lock);
*** DEADLOCK ***
2 locks held by charon/1337:
#0: ffffffff87f8f858 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{4:4}, at: xfrm_netlink_rcv+0x5e/0x90
#1: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
-> (&x->lock){+.-.}-{3:3} ops: 29 {
HARDIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_alloc_spi+0xc0/0xe60
xfrm_alloc_userspi+0x5f6/0xbc0
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
IN-SOFTIRQ-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
hrtimer_run_softirq+0x146/0x2e0
handle_softirqs+0x266/0x860
irq_exit_rcu+0x115/0x1a0
sysvec_apic_timer_interrupt+0x6e/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
default_idle+0x13/0x20
default_idle_call+0x67/0xa0
do_idle+0x2da/0x320
cpu_startup_entry+0x50/0x60
start_secondary+0x213/0x2a0
common_startup_64+0x129/0x138
INITIAL USE at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_alloc_spi+0xc0/0xe60
xfrm_alloc_userspi+0x5f6/0xbc0
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
}
... key at: [<ffffffff87f9cd20>] __key.18+0x0/0x40
the dependencies between the lock to be acquired
and SOFTIRQ-irq-unsafe lock:
-> (&xa->xa_lock#24){+.+.}-{3:3} ops: 9 {
HARDIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
SOFTIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock+0x2c/0x40
xa_set_mark+0x70/0x110
mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
INITIAL USE at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
}
... key at: [<ffffffffa078ff60>] __key.48+0x0/0xfffffffffff210a0 [mlx5_core]
... acquired at:
__lock_acquire+0x30a0/0x5040
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
xfrm_dev_state_delete+0x90/0x160
__xfrm_state_delete+0x662/0xae0
xfrm_state_delete+0x1e/0x30
xfrm_del_sa+0x1c2/0x340
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
stack backtrace:
CPU: 7 UID: 0 PID: 1337 Comm: charon Not tainted 6.12.0+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x74/0xd0
check_irq_usage+0x12e8/0x1d90
? print_shortest_lock_dependencies_backwards+0x1b0/0x1b0
? check_chain_key+0x1bb/0x4c0
? __lockdep_reset_lock+0x180/0x180
? check_path.constprop.0+0x24/0x50
? mark_lock+0x108/0x2fb0
? print_circular_bug+0x9b0/0x9b0
? mark_lock+0x108/0x2fb0
? print_usage_bug.part.0+0x670/0x670
? check_prev_add+0x1c4/0x2310
check_prev_add+0x1c4/0x2310
__lock_acquire+0x30a0/0x5040
? lockdep_set_lock_cmp_fn+0x190/0x190
? lockdep_set_lock_cmp_fn+0x190/0x190
lock_acquire+0x1be/0x520
? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
? lockdep_hardirqs_on_prepare+0x400/0x400
? __xfrm_state_delete+0x5f0/0xae0
? lock_downgrade+0x6b0/0x6b0
_raw_spin_lock_bh+0x34/0x40
? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
xfrm_dev_state_delete+0x90/0x160
__xfrm_state_delete+0x662/0xae0
xfrm_state_delete+0x1e/0x30
xfrm_del_sa+0x1c2/0x340
? xfrm_get_sa+0x250/0x250
? check_chain_key+0x1bb/0x4c0
xfrm_user_rcv_msg+0x493/0x880
? copy_sec_ctx+0x270/0x270
? check_chain_key+0x1bb/0x4c0
? lockdep_set_lock_cmp_fn+0x190/0x190
? lockdep_set_lock_cmp_fn+0x190/0x190
netlink_rcv_skb+0x12e/0x380
? copy_sec_ctx+0x270/0x270
? netlink_ack+0xd90/0xd90
? netlink_deliver_tap+0xcd/0xb60
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
? netlink_attachskb+0x730/0x730
? lock_acquire+0x1be/0x520
netlink_sendmsg+0x745/0xbe0
? netlink_unicast+0x740/0x740
? __might_fault+0xbb/0x170
? netlink_unicast+0x740/0x740
__sock_sendmsg+0xc5/0x190
? fdget+0x163/0x1d0
__sys_sendto+0x1fe/0x2c0
? __x64_sys_getpeername+0xb0/0xb0
? do_user_addr_fault+0x856/0xe30
? lock_acquire+0x1be/0x520
? __task_pid_nr_ns+0x117/0x410
? lock_downgrade+0x6b0/0x6b0
__x64_sys_sendto+0xdc/0x1b0
? lockdep_hardirqs_on_prepare+0x284/0x400
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f7d31291ba4
Code: 7d e8 89 4d d4 e8 4c 42 f7 ff 44 8b 4d d0 4c 8b 45 c8 89 c3 44 8b 55 d4 8b 7d e8 b8 2c 00 00 00 48 8b 55 d8 48 8b 75 e0 0f 05 <48> 3d 00 f0 ff ff 77 34 89 df 48 89 45 e8 e8 99 42 f7 ff 48 8b 45
RSP: 002b:00007f7d2ccd94f0 EFLAGS: 00000297 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f7d31291ba4
RDX: 0000000000000028 RSI: 00007f7d2ccd96a0 RDI: 000000000000000a
RBP: 00007f7d2ccd9530 R08: 00007f7d2ccd9598 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000028
R13: 00007f7d2ccd9598 R14: 00007f7d2ccd96a0 R15: 00000000000000e1
</TASK>
Fixes:
|
||
|
Mark Zhang
|
5641e82cb5 |
net/mlx5: Clear port select structure when fail to create
Clear the port select structure on error so no stale values left after
definers are destroyed. That's because the mlx5_lag_destroy_definers()
always try to destroy all lag definers in the tt_map, so in the flow
below lag definers get double-destroyed and cause kernel crash:
mlx5_lag_port_sel_create()
mlx5_lag_create_definers()
mlx5_lag_create_definer() <- Failed on tt 1
mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed
mlx5_lag_port_sel_create()
mlx5_lag_create_definers()
mlx5_lag_create_definer() <- Failed on tt 0
mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00
[0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)]
CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core]
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core]
lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core]
sp : ffff800085fafb00
x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000
x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000
x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000
x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350
x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0
x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c
x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190
x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000
Call trace:
mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core]
mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core]
mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core]
mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core]
mlx5_activate_lag+0x60c/0x6f8 [mlx5_core]
mlx5_do_bond_work+0x284/0x5c8 [mlx5_core]
process_one_work+0x170/0x3e0
worker_thread+0x2d8/0x3e0
kthread+0x11c/0x128
ret_from_fork+0x10/0x20
Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400)
---[ end trace 0000000000000000 ]---
Fixes:
|
||
|
Chris Mi
|
2011a2a18e |
net/mlx5: SF, Fix add port error handling
If failed to add SF, error handling doesn't delete the SF from the
SF table. But the hw resources are deleted. So when unload driver,
hw resources will be deleted again. Firmware will report syndrome
0x68def3 which means "SF is not allocated can not deallocate".
Fix it by delete SF from SF table if failed to add SF.
Fixes:
|
||
|
Yishai Hadas
|
1b10a519a4 |
net/mlx5: Fix a lockdep warning as part of the write combining test
Fix a lockdep warning [1] observed during the write combining test.
The warning indicates a potential nested lock scenario that could lead
to a deadlock.
However, this is a false positive alarm because the SF lock and its
parent lock are distinct ones.
The lockdep confusion arises because the locks belong to the same object
class (i.e., struct mlx5_core_dev).
To resolve this, the code has been refactored to avoid taking both
locks. Instead, only the parent lock is acquired.
[1]
raw_ethernet_bw/2118 is trying to acquire lock:
[ 213.619032] ffff88811dd75e08 (&dev->wc_state_lock){+.+.}-{3:3}, at:
mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.620270]
[ 213.620270] but task is already holding lock:
[ 213.620943] ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at:
mlx5_wc_support_get+0x10c/0x210 [mlx5_core]
[ 213.622045]
[ 213.622045] other info that might help us debug this:
[ 213.622778] Possible unsafe locking scenario:
[ 213.622778]
[ 213.623465] CPU0
[ 213.623815] ----
[ 213.624148] lock(&dev->wc_state_lock);
[ 213.624615] lock(&dev->wc_state_lock);
[ 213.625071]
[ 213.625071] *** DEADLOCK ***
[ 213.625071]
[ 213.625805] May be due to missing lock nesting notation
[ 213.625805]
[ 213.626522] 4 locks held by raw_ethernet_bw/2118:
[ 213.627019] #0: ffff88813f80d578 (&uverbs_dev->disassociate_srcu){.+.+}-{0:0},
at: ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.628088] #1: ffff88810fb23930 (&file->hw_destroy_rwsem){.+.+}-{3:3},
at: ib_init_ucontext+0x2d/0xf0 [ib_uverbs]
[ 213.629094] #2: ffff88810fb23878 (&file->ucontext_lock){+.+.}-{3:3},
at: ib_init_ucontext+0x49/0xf0 [ib_uverbs]
[ 213.630106] #3: ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3},
at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core]
[ 213.631185]
[ 213.631185] stack backtrace:
[ 213.631718] CPU: 1 UID: 0 PID: 2118 Comm: raw_ethernet_bw Not tainted
6.12.0-rc7_internal_net_next_mlx5_89a0ad0 #1
[ 213.632722] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 213.633785] Call Trace:
[ 213.634099]
[ 213.634393] dump_stack_lvl+0x7e/0xc0
[ 213.634806] print_deadlock_bug+0x278/0x3c0
[ 213.635265] __lock_acquire+0x15f4/0x2c40
[ 213.635712] lock_acquire+0xcd/0x2d0
[ 213.636120] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.636722] ? mlx5_ib_enable_lb+0x24/0xa0 [mlx5_ib]
[ 213.637277] __mutex_lock+0x81/0xda0
[ 213.637697] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.638305] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.638902] ? rcu_read_lock_sched_held+0x3f/0x70
[ 213.639400] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.640016] mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.640615] set_ucontext_resp+0x68/0x2b0 [mlx5_ib]
[ 213.641144] ? debug_mutex_init+0x33/0x40
[ 213.641586] mlx5_ib_alloc_ucontext+0x18e/0x7b0 [mlx5_ib]
[ 213.642145] ib_init_ucontext+0xa0/0xf0 [ib_uverbs]
[ 213.642679] ib_uverbs_handler_UVERBS_METHOD_GET_CONTEXT+0x95/0xc0
[ib_uverbs]
[ 213.643426] ? _copy_from_user+0x46/0x80
[ 213.643878] ib_uverbs_cmd_verbs+0xa6b/0xc80 [ib_uverbs]
[ 213.644426] ? ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x130/0x130
[ib_uverbs]
[ 213.645213] ? __lock_acquire+0xa99/0x2c40
[ 213.645675] ? lock_acquire+0xcd/0x2d0
[ 213.646101] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.646625] ? reacquire_held_locks+0xcf/0x1f0
[ 213.647102] ? do_user_addr_fault+0x45d/0x770
[ 213.647586] ib_uverbs_ioctl+0xe0/0x170 [ib_uverbs]
[ 213.648102] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.648632] __x64_sys_ioctl+0x4d3/0xaa0
[ 213.649060] ? do_user_addr_fault+0x4a8/0x770
[ 213.649528] do_syscall_64+0x6d/0x140
[ 213.649947] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 213.650478] RIP: 0033:0x7fa179b0737b
[ 213.650893] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c
89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8
10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d
7d 2a 0f 00 f7 d8 64 89 01 48
[ 213.652619] RSP: 002b:00007ffd2e6d46e8 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ 213.653390] RAX: ffffffffffffffda RBX: 00007ffd2e6d47f8 RCX:
00007fa179b0737b
[ 213.654084] RDX: 00007ffd2e6d47e0 RSI: 00000000c0181b01 RDI:
0000000000000003
[ 213.654767] RBP: 00007ffd2e6d47c0 R08: 00007fa1799be010 R09:
0000000000000002
[ 213.655453] R10: 00007ffd2e6d4960 R11: 0000000000000246 R12:
00007ffd2e6d487c
[ 213.656170] R13: 0000000000000027 R14: 0000000000000001 R15:
00007ffd2e6d4f70
Fixes:
|
||
|
Patrisious Haddad
|
c08d3e62b2 |
net/mlx5: Fix RDMA TX steering prio
User added steering rules at RDMA_TX were being added to the first prio,
which is the counters prio.
Fix that so that they are correctly added to the BYPASS_PRIO instead.
Fixes:
|
||
|
Pavel Begunkov
|
cbc16bceea |
net: make page_pool_ref_netmem work with net iovs
page_pool_ref_netmem() should work with either netmem representation, but
currently it casts to a page with netmem_to_page(), which will fail with
net iovs. Use netmem_get_pp_ref_count_ref() instead.
Fixes:
|
||
|
Heiner Kallweit
|
6be7aca910 |
net: ethernet: xgbe: re-add aneg to supported features in PHY quirks
In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES
included feature bits for aneg and TP/MII ports.
SUPPORTED_TP | \
SUPPORTED_MII)
SUPPORTED_10baseT_Full)
SUPPORTED_100baseT_Full)
SUPPORTED_1000baseT_Full)
PHY_100BT_FEATURES | \
PHY_DEFAULT_FEATURES)
PHY_1000BT_FEATURES)
Referenced commit expanded PHY_GBIT_FEATURES, silently removing
PHY_DEFAULT_FEATURES. The removed part can be re-added by using
the new PHY_GBIT_FEATURES definition.
Not clear to me is why nobody seems to have noticed this issue.
I stumbled across this when checking what it takes to make
phy_10_100_features_array et al private to phylib.
Fixes:
|
||
|
Vladimir Oltean
|
d6e3316a16 |
net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII
xpcs_config_2500basex() sets DW_VR_MII_DIG_CTRL1_2G5_EN, but
xpcs_config_aneg_c37_sgmii() never unsets it. So, on a protocol change
from 2500base-x to sgmii, the DW_VR_MII_DIG_CTRL1_2G5_EN bit will remain
set.
Fixes:
|
||
|
Vladimir Oltean
|
5c71729ab9 |
net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband
On a port with SGMII fixed-link at SPEED_1000, DW_VR_MII_DIG_CTRL1 gets
set to 0x2404. This is incorrect, because bit 2 (DW_VR_MII_DIG_CTRL1_2G5_EN)
is set.
It comes from the previous write to DW_VR_MII_AN_CTRL, because the "val"
variable is reused and is dirty. Actually, its value is 0x4, aka
FIELD_PREP(DW_VR_MII_PCS_MODE_MASK, DW_VR_MII_PCS_MODE_C37_SGMII).
Resolve the issue by clearing "val" to 0 when writing to a new register.
After the fix, the register value is 0x2400.
Prior to the blamed commit, when the read-modify-write was open-coded,
the code saved the content of the DW_VR_MII_DIG_CTRL1 register in the
"ret" variable.
Fixes:
|
||
|
Victor Nogueira
|
0a5b8fff01 |
selftests: net: Adapt ethtool mq tests to fix in qdisc graft
Because of patch[1] the graft behaviour changed So the command: tcq replace parent 100:1 handle 204: Is no longer valid and will not delete 100:4 added by command: tcq replace parent 100:4 handle 204: pfifo_fast So to maintain the original behaviour, this patch manually deletes 100:4 and grafts 100:1 Note: This change will also work fine without [1] [1] https://lore.kernel.org/netdev/20250111151455.75480-1-jhs@mojatatu.com/T/#u Signed-off-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Kevin Groeneveld
|
001ba09020 |
net: fec: handle page_pool_dev_alloc_pages error
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did
not handle the case when it returned NULL. There was a WARN_ON(!new_page)
but it would still proceed to use the NULL pointer and then crash.
This case does seem somewhat rare but when the system is under memory
pressure it can happen. One case where I can duplicate this with some
frequency is when writing over a smbd share to a SATA HDD attached to an
imx6q.
Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve
the problem for my test case. But it still seems wrong that the fec driver
ignores the memory allocation error and can crash.
This commit handles the allocation error by dropping the current packet.
Fixes:
|
||
|
John Sperbeck
|
f0d0277796 |
net: netpoll: ensure skb_pool list is always initialized
When __netpoll_setup() is called directly, instead of through
netpoll_setup(), the np->skb_pool list head isn't initialized.
If skb_pool_flush() is later called, then we hit a NULL pointer
in skb_queue_purge_reason(). This can be seen with this repro,
when CONFIG_NETCONSOLE is enabled as a module:
ip tuntap add mode tap tap0
ip link add name br0 type bridge
ip link set dev tap0 master br0
modprobe netconsole netconsole=4444@10.0.0.1/br0,9353@10.0.0.2/
rmmod netconsole
The backtrace is:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
... ... ...
Call Trace:
<TASK>
__netpoll_free+0xa5/0xf0
br_netpoll_cleanup+0x43/0x50 [bridge]
do_netpoll_cleanup+0x43/0xc0
netconsole_netdev_event+0x1e3/0x300 [netconsole]
unregister_netdevice_notifier+0xd9/0x150
cleanup_module+0x45/0x920 [netconsole]
__se_sys_delete_module+0x205/0x290
do_syscall_64+0x70/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Move the skb_pool list setup and initial skb fill into __netpoll_setup().
Fixes:
|
||
|
Sean Anderson
|
c17ff476f5 |
net: xilinx: axienet: Fix IRQ coalescing packet count overflow
If coalesce_count is greater than 255 it will not fit in the register and
will overflow. This can be reproduced by running
# ethtool -C ethX rx-frames 256
which will result in a timeout of 0us instead. Fix this by checking for
invalid values and reporting an error.
Fixes:
|
||
|
Dan Carpenter
|
16ebb6f5b6 |
nfp: bpf: prevent integer overflow in nfp_bpf_event_output()
The "sizeof(struct cmsg_bpf_event) + pkt_size + data_size" math could
potentially have an integer wrapping bug on 32bit systems. Check for
this and return an error.
Fixes:
|
||
|
Linus Torvalds
|
619f0b6fad |
seccomp fix for v6.13-rc8
- Unconditionally define stub for !CONFIG_SECCOMP (Linus Walleij) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ4bZ3gAKCRA2KwveOeQk u9EFAQDblRKUOJYdL2Jtqsy0c1OGyAdOhKK1uDjX2WOnp632RwEAni84LsWaJiqy EVCZq5Sj/qSQOc37QSnJAUSMTCjsUwc= =v4Mz -----END PGP SIGNATURE----- Merge tag 'seccomp-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fix from Kees Cook: "Fix a randconfig failure: - Unconditionally define stub for !CONFIG_SECCOMP (Linus Walleij)" * tag 'seccomp-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Stub for !CONFIG_SECCOMP |
||
|
Jakub Kicinski
|
f62bb88782 |
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says: ==================== Fix E825 initialization Grzegorz Nitka says: E825 products have incorrect initialization procedure, which may lead to initialization failures and register values. Fix E825 products initialization by adding correct sync delay, checking the PHY revision only for current PHY and adding proper destination device when reading port/quad. In addition, E825 uses PF ID for indexing per PF registers and as a primary PHY lane number, which is incorrect. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Add correct PHY lane assignment ice: Fix ETH56G FC-FEC Rx offset value ice: Fix quad registers read on E825 ice: Fix E825 initialization ==================== Link: https://patch.msgid.link/20250113182840.3564250-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
9de1280fb5 |
Merge branch 'mptcp-fixes-for-connect-selftest-flakes'
Matthieu Baerts says: ==================== mptcp: fixes for connect selftest flakes Last week, Jakub reported [1] that the MPTCP Connect selftest was unstable. It looked like it started after the introduction of some fixes [2]. After analysis from Paolo, these patches revealed existing bugs, that should be fixed by the following patches. - Patch 1: Make sure ACK are sent when MPTCP-level window re-opens. In some corner cases, the other peer was not notified when more data could be sent. A fix for v5.11, but depending on a feature introduced in v5.19. - Patch 2: Fix spurious wake-up under memory pressure. In this situation, the userspace could be invited to read data not being there yet. A fix for v6.7. - Patch 3: Fix a false positive error when running the MPTCP Connect selftest with the "disconnect" cases. The userspace could disconnect the socket too soon, which would reset (MP_FASTCLOSE) the connection, interpreted as an error by the test. A fix for v5.17. Link: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org [1] Link: https://lore.kernel.org/20241230-net-mptcp-rbuf-fixes-v1-0-8608af434ceb@kernel.org [2] ==================== Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-0-0d986ee7b1b6@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Paolo Abeni
|
218cc16632 |
selftests: mptcp: avoid spurious errors on disconnect
The disconnect test-case generates spurious errors:
INFO: disconnect
INFO: extra options: -I 3 -i /tmp/tmp.r43niviyoI
01 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 140ms) [FAIL]
file received by server does not match (in, out):
Unexpected revents: POLLERR/POLLNVAL(19)
-rw-r--r-- 1 root root 10028676 Jan 10 10:47 /tmp/tmp.r43niviyoI.disconnect
Trailing bytes are:
��\����R���!8��u2��5N%
-rw------- 1 root root 9992290 Jan 10 10:47 /tmp/tmp.Os4UbnWbI1
Trailing bytes are:
��\����R���!8��u2��5N%
02 ns1 MPTCP -> ns1 (dead:beef:1::1:10001) MPTCP (duration 206ms) [ OK ]
03 ns1 MPTCP -> ns1 (dead:beef:1::1:10002) TCP (duration 31ms) [ OK ]
04 ns1 TCP -> ns1 (dead:beef:1::1:10003) MPTCP (duration 26ms) [ OK ]
[FAIL] Tests of the full disconnection have failed
Time: 2 seconds
The root cause is actually in the user-space bits: the test program
currently disconnects as soon as all the pending data has been spooled,
generating an FASTCLOSE. If such option reaches the peer before the
latter has reached the closed status, the msk socket will report an
error to the user-space, as per protocol specification, causing the
above failure.
Address the issue explicitly waiting for all the relevant sockets to
reach a closed status before performing the disconnect.
Fixes:
|
||
|
Paolo Abeni
|
e226d9259d |
mptcp: fix spurious wake-up on under memory pressure
The wake-up condition currently implemented by mptcp_epollin_ready()
is wrong, as it could mark the MPTCP socket as readable even when
no data are present and the system is under memory pressure.
Explicitly check for some data being available in the receive queue.
Fixes:
|
||
|
Paolo Abeni
|
2ca06a2f65 |
mptcp: be sure to send ack when mptcp-level window re-opens
mptcp_cleanup_rbuf() is responsible to send acks when the user-space reads enough data to update the receive windows significantly. It tries hard to avoid acquiring the subflow sockets locks by checking conditions similar to the ones implemented at the TCP level. To avoid too much code duplication - the MPTCP protocol can't reuse the TCP helpers as part of the relevant status is maintained into the msk socket - and multiple costly window size computation, mptcp_cleanup_rbuf uses a rough estimate for the most recently advertised window size: the MPTCP receive free space, as recorded as at last-ack time. Unfortunately the above does not allow mptcp_cleanup_rbuf() to detect a zero to non-zero win change in some corner cases, skipping the tcp_cleanup_rbuf call and leaving the peer stuck. After commit |
||
|
Viresh Kumar
|
7e265fc046 |
cpufreq: Move endif to the end of Kconfig file
It is possible to enable few cpufreq drivers, without the framework
being enabled. This happened due to a bug while moving the entries
earlier. Fix it.
Fixes:
|
||
|
Linus Torvalds
|
7f5b6a8ec1 |
pci-v6.13-fixes-3
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmeGsZYUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vwu6RAAreLLwBLB0bb2nHoGTL0OjfG+u9PU 2lDkRD1A6g53YHMRLo67qC6TKD6+9e5N5xCxO+VjLBzE/KbPuD8cIacV+oYCv7r+ BlIkQUnmmEOIrcO4wc+DuH3cYpRCDGerp8L8TI/+bkuVzGoc0nvSOuvfe++hqbDP fkt5jcFUSN5NYmXQmfe5bdh41YC/uHAUw0+PpP+bt1ygdG4jfsMXbUOE7NVUa79Y Ovg+SSrUKdnTtKJqjIkpvapZkeXl4Pn4vcxiIo1AX+KfMYpNX0CYm2ByN5UIICa7 S0KE4Ac4Di7qg9jhFTTp8180sbgIxo6XCbIszRDyDvWJpVWFdZB5L1BNeZHgIDut 4JsDXCH0u75IdmLLwK2yTWbNaQSYUQcZfuMLybjso7sMUGnubjQT7e4k5qvEsWZj pY+uCByowDMh8gkrkdSsGwf8pPX/4ka/bKgNyAstOkkXERHMV5NPWv7Ex0zfwjK6 9QsJ8Wjfn0d3HqkHd+rD2cQWNYm2a3N5MhGZLK7vUQYulLa6MSwxEEjG4cv+E+aI T+MdhtX8mes45xfxzgMMY7JJBMEp3M9TQM6DjgtrWdig7sGDB93oNK2aCeg1zqvB Fvsn+izJCs2Ocks6+BWCIEaDYPAeTKnmat/7ZaUfLs/uw8nPS9RGE3/0OeiUJeGK EvT1mE6DYhVa1cY= =e6ty -----END PGP SIGNATURE----- Merge tag 'pci-v6.13-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fix from Bjorn Helgaas: - Prevent bwctrl NULL pointer dereference that caused hangs on shutdown on ASUS ROG Strix SCAR 17 G733PYV (Lukas Wunner) * tag 'pci-v6.13-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI/bwctrl: Fix NULL pointer deref on unbind and bind |
||
|
Linus Torvalds
|
c3812b1500 |
SCSI fixes on 20250114
One iscsi driver fix and one core fix. The core fix is an important one because a retry efficiency update is now causing some USB devices to get the wrong size on discovery (it upset their retry logic for READ_CAPACITY_16). Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ4aekCYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZNiAQC7ftQZ h+N/YhFZoWGfpOLca3ReHOce6Q7MgLl5N58k2QD+OWNsCcJJTPmCVY5LKaa3AZL7 1djLn30KUkJP4atVU08= =7RJf -----END PGP SIGNATURE----- Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One iscsi driver fix and one core fix. The core fix is an important one because a retry efficiency update is now causing some USB devices to get the wrong size on discovery (it upset their retry logic for READ_CAPACITY_16)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS request scsi: core: Fix command pass through retry regression |
||
|
Linus Torvalds
|
79a1d390f8 |
sound fixes for 6.13-final
Hopefully the last PR for 6.13. This became bigger than wished due to the timing after holiday breaks. The only large LOC is the additional document for Cirrus codec which is nice for users (and absolutely safe). All the rest are small fixes in ASoC Rcar and codecs as well as HD-audio quirks. (And no fix for USB guitar pedals seen yet :) -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmeFMr4OHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE/+gxAAnoqCV2/Ae+uavu9m+9CEAjWJ8TYqVyWSK8aJ IQpode97xOtndCM5FUTgOP2yXIoF7PECzyHYWn/l6r+5EuPspWeboqP1lwdgUmDh BFrHqP2Bq4AJ+g+rE1Av+6w3v0PSqUMGXY8jgOjYC/x1NKPQsnh26WytCoRmEk0q 9EFlRaZMaHcHcK2q1JyJqmfkdHo4pD4B3pszdS+cYCbqP3h0I4Xp2kZd1CXfasQj YjCPAHwl02Eka/FtiG143puln9qi84dGpMoI7s2Tajl1FHrHIzQSzoM7tseTA4qq ZGlkodxCfKCGv+Br/rLeGu9oi2U2r922LTneQ5wbgd0zPp4zBf3B0T+XkKOtxKCk i8WiBXa1tnreMg3y4SZ2XzUwC8YpKmsip7QW4Y7+IXH2obJsk8uEojZYL1i4zFxD POeYEFM+w8ipP/3RyCu49WZK5Kzmh3VFUzkNv2hAjamlT9OazLTNQLX+NeExweaX oJo2/sN9uHUBl6VoZoij34cVOIVVAxVby6Jpp6wTKOkyEQH/4ycY2Wq6rki4Cu2D td5bJCUW9TUQG9Usx+XWIEduCrRTCyIvUYzTVw+cldbI0AyPpgUgcgVRR4o8aXzv BdQM4FKxO+kjDuqU6b/pQXhJEo6QSaw2R4bIUs3tJMfbFRfNng7K6VDrgOh4Ebu9 xDC2E64= =kN92 -----END PGP SIGNATURE----- Merge tag 'sound-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Hopefully the last PR for 6.13. This became bigger than wished due to the timing after holiday breaks. The only large LOC is the additional document for Cirrus codec which is nice for users (and absolutely safe). All the rest are small fixes in ASoC Rcar and codecs as well as HD-audio quirks (And no fix for USB guitar pedals seen yet :)" * tag 'sound-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Fix volume adjustment issue on Lenovo ThinkBook 16P Gen5 ALSA: hda/realtek: fixup ASUS H7606W ALSA: hda/realtek: fixup ASUS GA605W ALSA: hda/realtek: Add support for Ayaneo System using CS35L41 HDA ASoC: rsnd: check rsnd_adg_clk_enable() return value ASoC: cs42l43: Add codec force suspend/resume ops ALSA: doc: Add codecs/index.rst to top-level index ALSA: doc: cs35l56: Add information about Cirrus Logic CS35L54/56/57 ASoC: samsung: Add missing depends on I2C MAINTAINERS: add missing maintainers for Simple Audio Card ASoC: samsung: Add missing selects for MFD_WM8994 ASoC: codecs: es8316: Fix HW rate calculation for 48Mhz MCLK ASoC: wm8994: Add depends on MFD core ASoC: tas2781: Fix occasional calibration failture ASoC: codecs: ES8326: Adjust ANA_MICBIAS to reduce pop noise |
||
|
Steven Rostedt
|
94d529a325 |
ftrace: Document that multiple function_graph tracing may have different times
The function graph tracer now calculates the calltime internally and for each instance. If there are two instances that are running function graph tracer and are tracing the same functions, the timings of the length of those functions may be slightly different: # trace-cmd record -B foo -p function_graph -B bar -p function_graph sleep 5 # trace-cmd report [..] bar: sleep-981 [000] ...1. 1101.109027: funcgraph_entry: 0.764 us | mutex_unlock(); (ret=0xffff8abcc256c300) foo: sleep-981 [000] ...1. 1101.109028: funcgraph_entry: 0.748 us | mutex_unlock(); (ret=0xffff8abcc256c300) bar: sleep-981 [000] ..... 1101.109029: funcgraph_exit: 2.456 us | } (ret=0xffff8abcc256c300) foo: sleep-981 [000] ..... 1101.109029: funcgraph_exit: 2.403 us | } (ret=0xffff8abcc256c300) bar: sleep-981 [000] d..1. 1101.109031: funcgraph_entry: 0.844 us | fpregs_assert_state_consistent(); (ret=0x0) foo: sleep-981 [000] d..1. 1101.109032: funcgraph_entry: 0.803 us | fpregs_assert_state_consistent(); (ret=0x0) Link: https://lore.kernel.org/all/20250114101806.b2778cb01f34f5be9d23ad98@kernel.org/ Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Suggested-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/20250114101202.02e7bc68@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Shrikanth Hegde
|
24e0e61040 |
tracing: Print lazy preemption model
Print lazy preemption model in ftrace header when latency-format=1.
# cat /sys/kernel/debug/sched/preempt
none voluntary full (lazy)
Without patch:
latency: 0 us, #232946/232946, CPU#40 | (M:unknown VP:0, KP:0, SP:0 HP:0 #P:80)
^^^^^^^
With Patch:
latency: 0 us, #1897938/25566788, CPU#16 | (M:lazy VP:0, KP:0, SP:0 HP:0 #P:80)
^^^^
Now that lazy preemption is part of the kernel, make sure the tracing
infrastructure reflects that.
Link: https://lore.kernel.org/20250103093647.575919-1-sshegde@linux.ibm.com
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Steven Rostedt
|
a485ea9e3e |
tracing: Fix irqsoff and wakeup latency tracers when using function graph
The function graph tracer has become generic so that kretprobes and BPF
can use it along with function graph tracing itself. Some of the
infrastructure was specific for function graph tracing such as recording
the calltime and return time of the functions. Calling the clock code on a
high volume function does add overhead. The calculation of the calltime
was removed from the generic code and placed into the function graph
tracer itself so that the other users did not incur this overhead as they
did not need that timestamp.
The calltime field was still kept in the generic return entry structure
and the function graph return entry callback filled it as that structure
was passed to other code.
But this broke both irqsoff and wakeup latency tracer as they still
depended on the trace structure containing the calltime when the option
display-graph is set as it used some of those same functions that the
function graph tracer used. But now the calltime was not set and was just
zero. This caused the calculation of the function time to be the absolute
value of the return timestamp and not the length of the function.
# cd /sys/kernel/tracing
# echo 1 > options/display-graph
# echo irqsoff > current_tracer
The tracers went from:
# REL TIME CPU TASK/PID |||| DURATION FUNCTION CALLS
# | | | | |||| | | | | | |
0 us | 4) <idle>-0 | d..1. | 0.000 us | irqentry_enter();
3 us | 4) <idle>-0 | d..2. | | irq_enter_rcu() {
4 us | 4) <idle>-0 | d..2. | 0.431 us | preempt_count_add();
5 us | 4) <idle>-0 | d.h2. | | tick_irq_enter() {
5 us | 4) <idle>-0 | d.h2. | 0.433 us | tick_check_oneshot_broadcast_this_cpu();
6 us | 4) <idle>-0 | d.h2. | 2.426 us | ktime_get();
9 us | 4) <idle>-0 | d.h2. | | tick_nohz_stop_idle() {
10 us | 4) <idle>-0 | d.h2. | 0.398 us | nr_iowait_cpu();
11 us | 4) <idle>-0 | d.h1. | 1.903 us | }
11 us | 4) <idle>-0 | d.h2. | | tick_do_update_jiffies64() {
12 us | 4) <idle>-0 | d.h2. | | _raw_spin_lock() {
12 us | 4) <idle>-0 | d.h2. | 0.360 us | preempt_count_add();
13 us | 4) <idle>-0 | d.h3. | 0.354 us | do_raw_spin_lock();
14 us | 4) <idle>-0 | d.h2. | 2.207 us | }
15 us | 4) <idle>-0 | d.h3. | 0.428 us | calc_global_load();
16 us | 4) <idle>-0 | d.h3. | | _raw_spin_unlock() {
16 us | 4) <idle>-0 | d.h3. | 0.380 us | do_raw_spin_unlock();
17 us | 4) <idle>-0 | d.h3. | 0.334 us | preempt_count_sub();
18 us | 4) <idle>-0 | d.h1. | 1.768 us | }
18 us | 4) <idle>-0 | d.h2. | | update_wall_time() {
[..]
To:
# REL TIME CPU TASK/PID |||| DURATION FUNCTION CALLS
# | | | | |||| | | | | | |
0 us | 5) <idle>-0 | d.s2. | 0.000 us | _raw_spin_lock_irqsave();
0 us | 5) <idle>-0 | d.s3. | 312159583 us | preempt_count_add();
2 us | 5) <idle>-0 | d.s4. | 312159585 us | do_raw_spin_lock();
3 us | 5) <idle>-0 | d.s4. | | _raw_spin_unlock() {
3 us | 5) <idle>-0 | d.s4. | 312159586 us | do_raw_spin_unlock();
4 us | 5) <idle>-0 | d.s4. | 312159587 us | preempt_count_sub();
4 us | 5) <idle>-0 | d.s2. | 312159587 us | }
5 us | 5) <idle>-0 | d.s3. | | _raw_spin_lock() {
5 us | 5) <idle>-0 | d.s3. | 312159588 us | preempt_count_add();
6 us | 5) <idle>-0 | d.s4. | 312159589 us | do_raw_spin_lock();
7 us | 5) <idle>-0 | d.s3. | 312159590 us | }
8 us | 5) <idle>-0 | d.s4. | 312159591 us | calc_wheel_index();
9 us | 5) <idle>-0 | d.s4. | | enqueue_timer() {
9 us | 5) <idle>-0 | d.s4. | | wake_up_nohz_cpu() {
11 us | 5) <idle>-0 | d.s4. | | native_smp_send_reschedule() {
11 us | 5) <idle>-0 | d.s4. | 312171987 us | default_send_IPI_single_phys();
12408 us | 5) <idle>-0 | d.s3. | 312171990 us | }
12408 us | 5) <idle>-0 | d.s3. | 312171991 us | }
12409 us | 5) <idle>-0 | d.s3. | 312171991 us | }
Where the calculation of the time for each function was the return time
minus zero and not the time of when the function returned.
Have these tracers also save the calltime in the fgraph data section and
retrieve it again on the return to get the correct timings again.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250113183124.61767419@gandalf.local.home
Fixes:
|
||
|
Paolo Abeni
|
665bcfc982 |
Merge branch 'vsock-some-fixes-due-to-transport-de-assignment'
Stefano Garzarella says: ==================== vsock: some fixes due to transport de-assignment v1: https://lore.kernel.org/netdev/20250108180617.154053-1-sgarzare@redhat.com/ v2: - Added patch 3 to cancel the virtio close delayed work when de-assigning the transport - Added patch 4 to clean the socket state after de-assigning the transport - Added patch 5 as suggested by Michael and Hyunwoo Kim. It's based on Hyunwoo Kim and Wongi Lee patch [1] but using WARN_ON and covering more functions - Added R-b/T-b tags This series includes two patches discussed in the thread started by Hyunwoo Kim a few weeks ago [1], plus 3 more patches added after some discussions on v1 (see changelog). All related to the case where a vsock socket is de-assigned from a transport (e.g., because the connect fails or is interrupted by a signal) and then assigned to another transport or to no-one (NULL). I tested with usual vsock test suite, plus Michal repro [2]. (Note: the repo works only if a G2H transport is not loaded, e.g. virtio-vsock driver). The first patch is a fix more appropriate to the problem reported in that thread, the second patch on the other hand is a related fix but of a different problem highlighted by Michal Luczaj. It's present only in vsock_bpf and already handled in af_vsock.c The third patch is to cancel the virtio close delayed work when de-assigning the transport, the fourth patch is to clean the socket state after de-assigning the transport, the last patch adds warnings and prevents null-ptr-deref in vsock_*[has_data|has_space]. Hyunwoo Kim, Michal, if you can test and report your Tested-by that would be great! [1] https://lore.kernel.org/netdev/Z2K%2FI4nlHdfMRTZC@v4bel-B760M-AORUS-ELITE-AX/ [2] https://lore.kernel.org/netdev/2b3062e3-bdaa-4c94-a3c0-2930595b9670@rbox.co/ ==================== Link: https://patch.msgid.link/20250110083511.30419-1-sgarzare@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Stefano Garzarella
|
91751e2482 |
vsock: prevent null-ptr-deref in vsock_*[has_data|has_space]
Recent reports have shown how we sometimes call vsock_*_has_data()
when a vsock socket has been de-assigned from a transport (see attached
links), but we shouldn't.
Previous commits should have solved the real problems, but we may have
more in the future, so to avoid null-ptr-deref, we can return 0
(no space, no data available) but with a warning.
This way the code should continue to run in a nearly consistent state
and have a warning that allows us to debug future problems.
Fixes:
|
||
|
Stefano Garzarella
|
a24009bc9b |
vsock: reset socket state when de-assigning the transport
Transport's release() and destruct() are called when de-assigning the
vsock transport. These callbacks can touch some socket state like
sock flags, sk_state, and peer_shutdown.
Since we are reassigning the socket to a new transport during
vsock_connect(), let's reset these fields to have a clean state with
the new transport.
Fixes:
|
||
|
Stefano Garzarella
|
df137da9d6 |
vsock/virtio: cancel close work in the destructor
During virtio_transport_release() we can schedule a delayed work to
perform the closing of the socket before destruction.
The destructor is called either when the socket is really destroyed
(reference counter to zero), or it can also be called when we are
de-assigning the transport.
In the former case, we are sure the delayed work has completed, because
it holds a reference until it completes, so the destructor will
definitely be called after the delayed work is finished.
But in the latter case, the destructor is called by AF_VSOCK core, just
after the release(), so there may still be delayed work scheduled.
Refactor the code, moving the code to delete the close work already in
the do_close() to a new function. Invoke it during destruction to make
sure we don't leave any pending work.
Fixes:
|
||
|
Stefano Garzarella
|
f6abafcd32 |
vsock/bpf: return early if transport is not assigned
Some of the core functions can only be called if the transport
has been assigned.
As Michal reported, a socket might have the transport at NULL,
for example after a failed connect(), causing the following trace:
BUG: kernel NULL pointer dereference, address: 00000000000000a0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 12faf8067 P4D 12faf8067 PUD 113670067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 15 UID: 0 PID: 1198 Comm: a.out Not tainted 6.13.0-rc2+
RIP: 0010:vsock_connectible_has_data+0x1f/0x40
Call Trace:
vsock_bpf_recvmsg+0xca/0x5e0
sock_recvmsg+0xb9/0xc0
__sys_recvfrom+0xb3/0x130
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
So we need to check the `vsk->transport` in vsock_bpf_recvmsg(),
especially for connected sockets (stream/seqpacket) as we already
do in __vsock_connectible_recvmsg().
Fixes:
|
||
|
Stefano Garzarella
|
2cb7c756f6 |
vsock/virtio: discard packets if the transport changes
If the socket has been de-assigned or assigned to another transport,
we must discard any packets received because they are not expected
and would cause issues when we access vsk->transport.
A possible scenario is described by Hyunwoo Kim in the attached link,
where after a first connect() interrupted by a signal, and a second
connect() failed, we can find `vsk->transport` at NULL, leading to a
NULL pointer dereference.
Fixes:
|
||
|
Paolo Abeni
|
0865b9fdb2 |
Merge branch 'gtp-pfcp-fix-use-after-free-of-udp-tunnel-socket'
Kuniyuki Iwashima says: ==================== gtp/pfcp: Fix use-after-free of UDP tunnel socket. Xiao Liang pointed out weird netns usages in ->newlink() of gtp and pfcp. This series fixes the issues. Link: https://lore.kernel.org/netdev/20250104125732.17335-1-shaw.leon@gmail.com/ Changes: v2: * Patch 1 * Fix uninit/unused local var v1: https://lore.kernel.org/netdev/20250108062834.11117-1-kuniyu@amazon.com/ ==================== Link: https://patch.msgid.link/20250110014754.33847-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Kuniyuki Iwashima
|
ffc90e9ca6 |
pfcp: Destroy device along with udp socket's netns dismantle.
pfcp_newlink() links the device to a list in dev_net(dev) instead
of net, where a udp tunnel socket is created.
Even when net is removed, the device stays alive on dev_net(dev).
Then, removing net triggers the splat below. [0]
In this example, pfcp0 is created in ns2, but the udp socket is
created in ns1.
ip netns add ns1
ip netns add ns2
ip -n ns1 link add netns ns2 name pfcp0 type pfcp
ip netns del ns1
Let's link the device to the socket's netns instead.
Now, pfcp_net_exit() needs another netdev iteration to remove
all pfcp devices in the netns.
pfcp_dev_list is not used under RCU, so the list API is converted
to the non-RCU variant.
pfcp_net_exit() can be converted to .exit_batch_rtnl() in net-next.
[0]:
ref_tracker: net notrefcnt@00000000128b34dc has 1/1 users at
sk_alloc (./include/net/net_namespace.h:345 net/core/sock.c:2236)
inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252)
__sock_create (net/socket.c:1558)
udp_sock_create4 (net/ipv4/udp_tunnel_core.c:18)
pfcp_create_sock (drivers/net/pfcp.c:168)
pfcp_newlink (drivers/net/pfcp.c:182 drivers/net/pfcp.c:197)
rtnl_newlink (net/core/rtnetlink.c:3786 net/core/rtnetlink.c:3897 net/core/rtnetlink.c:4012)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6922)
netlink_rcv_skb (net/netlink/af_netlink.c:2542)
netlink_unicast (net/netlink/af_netlink.c:1321 net/netlink/af_netlink.c:1347)
netlink_sendmsg (net/netlink/af_netlink.c:1891)
____sys_sendmsg (net/socket.c:711 net/socket.c:726 net/socket.c:2583)
___sys_sendmsg (net/socket.c:2639)
__sys_sendmsg (net/socket.c:2669)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
WARNING: CPU: 1 PID: 11 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179)
Modules linked in:
CPU: 1 UID: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.13.0-rc5-00147-g4c1224501e9d #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: netns cleanup_net
RIP: 0010:ref_tracker_dir_exit (lib/ref_tracker.c:179)
Code: 00 00 00 fc ff df 4d 8b 26 49 bd 00 01 00 00 00 00 ad de 4c 39 f5 0f 85 df 00 00 00 48 8b 74 24 08 48 89 df e8 a5 cc 12 02 90 <0f> 0b 90 48 8d 6b 44 be 04 00 00 00 48 89 ef e8 80 de 67 ff 48 89
RSP: 0018:ff11000007f3fb60 EFLAGS: 00010286
RAX: 00000000000020ef RBX: ff1100000d6481e0 RCX: 1ffffffff0e40d82
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8423ee3c
RBP: ff1100000d648230 R08: 0000000000000001 R09: fffffbfff0e395af
R10: 0000000000000001 R11: 0000000000000000 R12: ff1100000d648230
R13: dead000000000100 R14: ff1100000d648230 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ff1100006ce80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005620e1363990 CR3: 000000000eeb2002 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn (kernel/panic.c:748)
? ref_tracker_dir_exit (lib/ref_tracker.c:179)
? report_bug (lib/bug.c:201 lib/bug.c:219)
? handle_bug (arch/x86/kernel/traps.c:285)
? exc_invalid_op (arch/x86/kernel/traps.c:309 (discriminator 1))
? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621)
? _raw_spin_unlock_irqrestore (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194)
? ref_tracker_dir_exit (lib/ref_tracker.c:179)
? __pfx_ref_tracker_dir_exit (lib/ref_tracker.c:158)
? kfree (mm/slub.c:4613 mm/slub.c:4761)
net_free (net/core/net_namespace.c:476 net/core/net_namespace.c:467)
cleanup_net (net/core/net_namespace.c:664 (discriminator 3))
process_one_work (kernel/workqueue.c:3229)
worker_thread (kernel/workqueue.c:3304 kernel/workqueue.c:3391)
kthread (kernel/kthread.c:389)
ret_from_fork (arch/x86/kernel/process.c:147)
ret_from_fork_asm (arch/x86/entry/entry_64.S:257)
</TASK>
Fixes:
|
||
|
Kuniyuki Iwashima
|
eb28fd76c0 |
gtp: Destroy device along with udp socket's netns dismantle.
gtp_newlink() links the device to a list in dev_net(dev) instead of
src_net, where a udp tunnel socket is created.
Even when src_net is removed, the device stays alive on dev_net(dev).
Then, removing src_net triggers the splat below. [0]
In this example, gtp0 is created in ns2, and the udp socket is created
in ns1.
ip netns add ns1
ip netns add ns2
ip -n ns1 link add netns ns2 name gtp0 type gtp role sgsn
ip netns del ns1
Let's link the device to the socket's netns instead.
Now, gtp_net_exit_batch_rtnl() needs another netdev iteration to remove
all gtp devices in the netns.
[0]:
ref_tracker: net notrefcnt@000000003d6e7d05 has 1/2 users at
sk_alloc (./include/net/net_namespace.h:345 net/core/sock.c:2236)
inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252)
__sock_create (net/socket.c:1558)
udp_sock_create4 (net/ipv4/udp_tunnel_core.c:18)
gtp_create_sock (./include/net/udp_tunnel.h:59 drivers/net/gtp.c:1423)
gtp_create_sockets (drivers/net/gtp.c:1447)
gtp_newlink (drivers/net/gtp.c:1507)
rtnl_newlink (net/core/rtnetlink.c:3786 net/core/rtnetlink.c:3897 net/core/rtnetlink.c:4012)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6922)
netlink_rcv_skb (net/netlink/af_netlink.c:2542)
netlink_unicast (net/netlink/af_netlink.c:1321 net/netlink/af_netlink.c:1347)
netlink_sendmsg (net/netlink/af_netlink.c:1891)
____sys_sendmsg (net/socket.c:711 net/socket.c:726 net/socket.c:2583)
___sys_sendmsg (net/socket.c:2639)
__sys_sendmsg (net/socket.c:2669)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
WARNING: CPU: 1 PID: 60 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179)
Modules linked in:
CPU: 1 UID: 0 PID: 60 Comm: kworker/u16:2 Not tainted 6.13.0-rc5-00147-g4c1224501e9d #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: netns cleanup_net
RIP: 0010:ref_tracker_dir_exit (lib/ref_tracker.c:179)
Code: 00 00 00 fc ff df 4d 8b 26 49 bd 00 01 00 00 00 00 ad de 4c 39 f5 0f 85 df 00 00 00 48 8b 74 24 08 48 89 df e8 a5 cc 12 02 90 <0f> 0b 90 48 8d 6b 44 be 04 00 00 00 48 89 ef e8 80 de 67 ff 48 89
RSP: 0018:ff11000009a07b60 EFLAGS: 00010286
RAX: 0000000000002bd3 RBX: ff1100000f4e1aa0 RCX: 1ffffffff0e40ac6
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8423ee3c
RBP: ff1100000f4e1af0 R08: 0000000000000001 R09: fffffbfff0e395ae
R10: 0000000000000001 R11: 0000000000036001 R12: ff1100000f4e1af0
R13: dead000000000100 R14: ff1100000f4e1af0 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ff1100006ce80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f9b2464bd98 CR3: 0000000005286005 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn (kernel/panic.c:748)
? ref_tracker_dir_exit (lib/ref_tracker.c:179)
? report_bug (lib/bug.c:201 lib/bug.c:219)
? handle_bug (arch/x86/kernel/traps.c:285)
? exc_invalid_op (arch/x86/kernel/traps.c:309 (discriminator 1))
? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621)
? _raw_spin_unlock_irqrestore (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194)
? ref_tracker_dir_exit (lib/ref_tracker.c:179)
? __pfx_ref_tracker_dir_exit (lib/ref_tracker.c:158)
? kfree (mm/slub.c:4613 mm/slub.c:4761)
net_free (net/core/net_namespace.c:476 net/core/net_namespace.c:467)
cleanup_net (net/core/net_namespace.c:664 (discriminator 3))
process_one_work (kernel/workqueue.c:3229)
worker_thread (kernel/workqueue.c:3304 kernel/workqueue.c:3391)
kthread (kernel/kthread.c:389)
ret_from_fork (arch/x86/kernel/process.c:147)
ret_from_fork_asm (arch/x86/entry/entry_64.S:257)
</TASK>
Fixes:
|
||
|
Kuniyuki Iwashima
|
46841c7053 |
gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp().
gtp_newlink() links the gtp device to a list in dev_net(dev).
However, even after the gtp device is moved to another netns,
it stays on the list but should be invisible.
Let's use for_each_netdev_rcu() for netdev traversal in
gtp_genl_dump_pdp().
Note that gtp_dev_list is no longer used under RCU, so list
helpers are converted to the non-RCU variant.
Fixes:
|
||
|
Philo Lu
|
644f9108f3 |
udp: Make rehash4 independent in udp_lib_rehash()
As discussed in [0], rehash4 could be missed in udp_lib_rehash() when
udp hash4 changes while hash2 doesn't change. This patch fixes this by
moving rehash4 codes out of rehash2 checking, and then rehash2 and
rehash4 are done separately.
By doing this, we no longer need to call rehash4 explicitly in
udp_lib_hash4(), as the rehash callback in __ip4_datagram_connect takes
it. Thus, now udp_lib_hash4() returns directly if the sk is already
hashed.
Note that uhash4 may fail to work under consecutive connect(<dst
address>) calls because rehash() is not called with every connect(). To
overcome this, connect(<AF_UNSPEC>) needs to be called after the next
connect to a new destination.
[0]
https://lore.kernel.org/all/4761e466ab9f7542c68cdc95f248987d127044d2.1733499715.git.pabeni@redhat.com/
Fixes:
|
||
|
Heiner Kallweit
|
1f691a1fc4 |
r8169: remove redundant hwmon support
The temperature sensor is actually part of the integrated PHY and available
also on the standalone versions of the PHY. Therefore hwmon support will
be added to the Realtek PHY driver and can be removed here.
Fixes:
|
||
|
Paul Fertser
|
9e2bbab94b |
net/ncsi: fix locking in Get MAC Address handling
Obtaining RTNL lock in a response handler is not allowed since it runs
in an atomic softirq context. Postpone setting the MAC address by adding
a dedicated step to the configuration FSM.
Fixes:
|