Fix nf_flow_ip6_tunnel_proto() to use pskb_may_pull() instead of
skb_header_pointer() to ensure the outer IPv6 header is in the skb
headroom, which is required for subsequent packet processing. Move
ctx->offset update inside the IPPROTO_IPV6 conditional block since it
should only be adjusted when an IP6IP6 tunnel is actually detected.
Simplify the rx path by removing ipv6_skip_exthdr() and checking
ip6h->nexthdr directly, as the flowtable fast path only handles simple
IP6IP6 encapsulation without extension headers.
Drop the tunnel encapsulation limit destination option support from the
tx path to match, since the rx path no longer handles extension headers.
Remove the encap_limit parameter from nf_flow_offload_ipv6_forward(),
nf_flow_tunnel_ip6ip6_push() and nf_flow_tunnel_v6_push(), along with
the ipv6_tel_txoption struct and related headroom/MTU adjustments.
Fixes: d98103575d ("netfilter: flowtable: Add IP6IP6 rx sw acceleration")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
xt_cluster_mt() treats any non-NULL nf_ct_get() result as a fully
initialized conntrack and passes it to xt_cluster_hash().
This causes a state confusion bug when the raw table CT target attaches
a template conntrack to skb->_nfct before normal conntrack processing.
Templates carry IPS_TEMPLATE status but do not have a valid tuple for
hashing yet, so xt_cluster_hash() can hit its WARN_ON() path on the
zeroed l3num field.
Reject template conntracks before hashing them. This matches existing
netfilter handling for template objects and avoids hashing incomplete
conntrack state.
Fixes: 0269ea4937 ("netfilter: xtables: add cluster match")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic.
Fixes: 34666d467c ("netfilter: bridge: move br_netfilter out of the core")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
OpenWrt has recently migrated many platforms to kernel 6.18. On the
MediaTek platform, which supports hardware network offloading, WiFi
connections accelerated via the WED path were observed to drop after
roughly 300 seconds.
After several debugging sessions, assisted by the Claude LLM, the
problem was narrowed down as follows:
nf_flow_table_extend_ct_timeout() extends ct->timeout for offloaded
flows using:
cmpxchg(&ct->timeout, expires, new_timeout);
'expires' comes from nf_ct_expires(ct) and is a relative value, while
ct->timeout holds an absolute timestamp. The two are never equal, so
the cmpxchg always fails and the timeout is never extended.
This goes unnoticed for most flows, but a long-lived hardware (WED)
offloaded flow on MediaTek MT7986 eventually has ct->timeout decay to
zero, the conntrack entry is reaped and the connection breaks.
Open-code the relative value from a single READ_ONCE(ct->timeout)
snapshot and compare against that same absolute snapshot in the
cmpxchg, so the timeout extension actually takes effect while the
datapath remains authoritative if it updates ct->timeout concurrently.
Fixes: 03428ca5ce ("netfilter: conntrack: rework offload nf_conn timeout extension logic")
Cc: stable@vger.kernel.org
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Adrian Bente <adibente@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When __fbnic_set_rx_mode() is called from contexts other than
.ndo_set_rx_mode_async(), the uc and mc addr lists are accessed
without the addr lock that __hw_addr_sync_dev() and
__hw_addr_unsync_dev() require. Wrap these unprotected accesses with
netif_addr_lock_bh(). fbnic_clear_rx_mode() has similar issues.
Fixes: eb690ef8d1 ("eth: fbnic: Add L2 address programming")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260617-linux-fbnic-hwaddr-v1-1-3f9f5dee7f99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to
crypto_aead_decrypt(req) without taking a reference on the netns, unlike
the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously
(e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs
tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the
meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the
per-netns tipc_crypto, and the completion then reads it:
tipc_aead_decrypt_done() dereferences aead->crypto->stats and
aead->crypto->net, and tipc_crypto_rcv_complete() dereferences
aead->crypto->aead[] and the node table -- reading freed memory.
Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO):
BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999)
Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51
Workqueue: events_unbound
Call Trace:
tipc_aead_decrypt_done (net/tipc/crypto.c:999)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Allocated by task 169:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
tipc_crypto_start (net/tipc/crypto.c:1502)
tipc_init_net (net/tipc/core.c:72)
ops_init (net/core/net_namespace.c:137)
setup_net (net/core/net_namespace.c:446)
copy_net_ns (net/core/net_namespace.c:579)
create_new_namespaces (kernel/nsproxy.c:132)
__x64_sys_unshare (kernel/fork.c:3316)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Freed by task 8:
kfree (mm/slub.c:6566)
tipc_exit_net (net/tipc/core.c:119)
cleanup_net (net/core/net_namespace.c:704)
process_one_work (kernel/workqueue.c:3314)
kthread (kernel/kthread.c:436)
This is the same class of bug that commit e279024617 ("net/tipc: fix
slab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encrypt
side. The encrypt path takes maybe_get_net(aead->crypto->net) before
crypto_aead_encrypt() and drops it with put_net() on the synchronous
return paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSY
return keeps the reference for the async callback to release. The decrypt
path was left without the equivalent guard.
Mirror the encrypt-side fix on the decrypt path: take a net reference
before crypto_aead_decrypt() (failing with -ENODEV and the matching
bearer put if it cannot be acquired), keep it across the
-EINPROGRESS/-EBUSY async return, and drop it with put_net() on the
synchronous success/error return and at the end of
tipc_aead_decrypt_done().
Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key is
flooded with crafted encrypted frames from an unknown peer (driving the
cluster-key decrypt path) while the bearer's netns is repeatedly torn
down. The completion must run asynchronously to outlive
tipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decrypts
synchronously, so the async path was exercised via cryptd offload. The
unguarded aead->crypto dereference in tipc_aead_decrypt_done() is the
unpatched upstream path; tipc_aead_decrypt() still lacks
maybe_get_net(aead->crypto->net), so the completion can outlive the free
on any config where crypto_aead_decrypt() goes async.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260617075818.37431-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_rm_size() handles RDS_CMSG_RDMA_ARGS after only CMSG_OK() and then
calls rds_rdma_extra_size(), which reads args->local_vec_addr and
args->nr_local without first checking that cmsg_len covers struct
rds_rdma_args. The other two RDS_CMSG_RDMA_ARGS consumers already guard
this: rds_rdma_bytes() in rds_sendmsg() and rds_cmsg_rdma_args() in
rds_cmsg_send() both reject cmsg_len < CMSG_LEN(sizeof(struct
rds_rdma_args)). Add the same check to rds_rm_size() so all three RDMA
args passes are consistent.
This is a consistency and hardening change with no behavioral effect for
well-formed senders and no reachable bug today: rds_rdma_bytes() runs
before rds_rm_size() in rds_sendmsg() and already rejects a short
RDS_CMSG_RDMA_ARGS, so the size pass is not reached with an undersized
cmsg. But rds_rm_size() reads the args independently of that earlier
pass, and nothing in rds_rm_size() itself records or enforces the
precondition, so a reader or a future refactor of the size pass cannot
tell the cmsg has already been length-checked. Applying the same
cmsg_len guard in all three RDS_CMSG_RDMA_ARGS consumers keeps that
invariant local to each and robust to reordering.
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260617023146.2780077-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure the output file is always owned by root (even if tcpdump was
compiled with `--with-user`), by passing the `-Z root` argument when
invoking it.
Cc: stable@vger.kernel.org
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/2129815
Fixes: bf59028ea8 ("selftests: net: add test for destination in broadcast packets")
Suggested-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Tested-by: Ross Porter <ross.porter@canonical.com>
Signed-off-by: Ross Porter <ross.porter@canonical.com>
Link: https://patch.msgid.link/20260617061039.79717-2-ross.porter@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Like commit a24162f18825("i40e: don't advertise IFF_SUPP_NOFCS"),
ngbe and txgbe also advertises IFF_SUPP_NOFCS and allowing users
to use the SO_NOFCS socket option. But the driver does not check
skb->no_fcs, so this option is silently ignored.
With this change, send() fails with -EPROTONOSUPPORT when AF_PACKET
socket is set SO_NOFCS option.
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Link: https://patch.msgid.link/20260617092854.133992-1-clementwei90@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
check_operstate() busy waits for up to one second for the operational
state to change to the expected state. This is not enough since carrier
loss events can be delayed by the kernel for up to one second (see
__linkwatch_run_queue()), leading to sporadic failures.
Fix by increasing the busy wait period to two seconds.
Fixes: dca12e9ab7 ("selftests: net: Add a VLAN bridge binding selftest")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20260616092733.3a31be4d@kernel.org/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260617104323.1069457-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
create_queues_with_size_backoff() creates XDP TX queues before setting
up the regular TX path. If the subsequent allocation or creation of
regular TX queues fails, the error handling paths omit the teardown of the
XDP TX queues, leading to a resource leak.
Fix this by explicitly destroying the XDP TX queue subset at the two
missing failure points.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have
an ENA device to test with, no runtime testing was able to be performed.
Fixes: 548c4940b9 ("net: ena: Implement XDP_TX action")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Link: https://patch.msgid.link/20260616142424.4005130-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DQO RX datapath programs a per-buffer-queue-descriptor
header_buf_addr at post time and reads the split header back at
completion time. Both the post and the read currently index the
header buffer by queue position rather than by the buffer's identity:
- post (gve_rx_post_buffers_dqo): header_buf_addr is computed from
bufq->tail
- read (gve_rx_dqo): the header is read from desc_idx (the completion
queue head index)
This relies on the buffer-queue index and the completion-queue index
being equal for the start of every packet, i.e. on the device consuming
posted buffers and returning completions in the exact same order. That
assumption does not hold once HW-GRO is enabled with multiple
flows: coalesced segments are accepted and completed in an order that
may differ from the order buffers were posted, and segments from
different flows may interleave.
That results in two problems:
1. Wrong header slot on read. Because the read offset is derived from
the completion index (desc_idx) while the device wrote the header to
the address programmed for the buffer's buf_id, the driver can copy
a header belonging to a different packet. This shows up as
throughput drop (about 30% drop and large numbers of TCP
retransmissions) with header-split and HW-GRO both enabled and many
streams.
2. Header buffer reused while still owned by the device. The driver
advances bufq->head by one per completion and re-posts buffers based
on that. Arrival of N RX completions only guarantees that at least N
RX buffer descriptors have been read by the device. It does not
guarantee that the device has relinquished the ownership of all the
buffers corresponding to those N descriptors. With out-of-order
completions (e.g. the completion for a packet copied into buffer N
arrives before the completion for a packet copied into buffer N-1),
the driver can re-post and overwrite a header buffer that the device
is still going to write into, corrupting the header of a packet
whose completion has not yet been processed.
Fix both issues by indexing the header buffer by buf_id on both the post
and read paths. Reading from buf_id's slot is therefore always correct
regardless of completion ordering (fixes problem 1).
Indexing by buf_id also ties each header slot to the lifetime of its
buffer state. A buffer state is only returned to the free/recycle lists
when its own completion (buf_id) is processed, so its header slot can
only be re-posted after the device is done with it. This makes header
slot reuse safe under out-of-order completions (fixes problem 2).
Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the
header buffers based on num_buf_states to match the buf_id indexing.
Cc: stable@vger.kernel.org
Fixes: 5e37d8254e ("gve: Add header split data path")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260617013208.3781453-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The
first frame goes into the skb linear area and every further frame is added as
a page fragment.
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
page, hdr_size, frame_size,
TBNET_RX_PAGE_SIZE - hdr_size);
A packet of frame_count frames therefore ends up with frame_count - 1
fragments. tbnet_check_frame() only bounds the peer supplied frame_count to
TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A
peer that sends a packet of 19 or more small frames pushes nr_frags past
MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and
corrupts memory after the shared info.
Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never
produce more fragments than frags[] can hold. This matches the recent skb
frags overflow fixes in other receive paths, for example f0813bcd2d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554
("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()").
Fixes: e69b6c02b4 ("net: Add support for networking over Thunderbolt cable")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/178163152194.2486768.14724194232649760778@maoyixie.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nt->buf is exactly MAX_PRINT_CHUNK bytes, but scnprintf() reserves one
byte for its NUL terminator, so a non-fragmented payload of exactly
MAX_PRINT_CHUNK loses its last byte (emitted as a stray NUL in the
release path). Grow nt->buf to MAX_PRINT_CHUNK + 1 and bound the
scnprintf() calls with sizeof(nt->buf); the transmitted length stays
capped at MAX_PRINT_CHUNK.
Alternatively, nt->buf could be left at MAX_PRINT_CHUNK and the NUL byte
reserved by routing exactly-MAX_PRINT_CHUNK payloads to fragmentation
('len < MAX_PRINT_CHUNK'), at the cost of fragmenting those messages.
But it would look less sane, thus the current approach.
Fixes: c62c0a17f9 ("netconsole: Append kernel version to message")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260616-max_print_chunk-v1-1-8dc125d67083@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb)
when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb
has a valid Ethernet header at mac_header, which is not always the case.
The problem can be triggered by:
1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0)
2. Attaching a multiq qdisc with a flower filter matching on eth_src
3. Sending a packet through AF_PACKET
Since TUN in L3 mode has no link-layer header, mac_header points to
the L3 data area. The flow dissector reads 12 bytes of uninitialized
skb memory, which then propagates through fl_set_masked_key() and is
used as a rhashtable lookup key in __fl_lookup(), as reported by KMSAN.
Rejecting the filter in the control path (at tc filter add time) is
not feasible because TC filter blocks can be shared between arbitrary
devices -- a filter installed on an Ethernet device may later classify
packets on a headerless device through a shared block. The device
association is not fixed at filter creation time.
Fix this by gating the memcpy on dev->type == ARPHRD_ETHER, which
ensures only true Ethernet-framed packets have their addresses read.
This is more precise than the previous hard_header_len >= 12 check,
which would incorrectly pass for non-Ethernet link types like IPoIB
(ARPHRD_INFINIBAND, hard_header_len=24) and FDDI (hard_header_len=21)
whose L2 headers are not in Ethernet format. Additionally check
skb_mac_header_was_set() to guard against the pathological case where
mac_header is the unset sentinel (~0U), which would cause eth_hdr() to
return a wild pointer.
For the act_mirred redirect case (Ethernet packet redirected to a
non-Ethernet device sharing a TC block), zeroing the key is the correct
behavior: the packet is now being classified on the target device, where
Ethernet address matching is not semantically meaningful.
Note: on non-Ethernet devices, the zeroed key will match a filter
configured with all-zero MAC addresses. This is an improvement over the
previous behavior where uninitialized memory could randomly match any
filter.
Reported-by: syzbot+fa2f5b1fb06147be5e16@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fa2f5b1fb06147be5e16
Fixes: 67a900cc04 ("flow_dissector: introduce support for Ethernet addresses")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Link: https://patch.msgid.link/20260616123057.482154-1-yun.zhou@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MACB found in the Raspberry Pi RP1 suffers from sporadic stalls on
the TX queue.
While the exact root cause is not yet fully understood, it is likely
related to a hardware issue where a TSTART write to the NCR register
is missed, preventing the transmission from being kicked off.
Implement a timeout callback to handle TX queue stalls, triggering the
existing restart mechanism to recover.
Link: https://lore.kernel.org/all/20260514215459.36109-1-lukasz@raczylo.com/
Fixes: dc110d1b23 ("net: cadence: macb: Add support for Raspberry Pi RP1 ethernet controller")
Signed-off-by: Lukasz Raczylo <lukasz@raczylo.com>
Co-developed-by: Steffen Jaeckel <sjaeckel@suse.de>
Signed-off-by: Steffen Jaeckel <sjaeckel@suse.de>
Co-developed-by: Andrea della Porta <andrea.porta@suse.com>
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/468f480454a314303bac6a54780b153f689f2267.1781598350.git.andrea.porta@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
foe_check_time is declared as u16 pointer but was allocated with
only ppe_num_entries bytes instead of ppe_num_entries * sizeof(u16).
When airoha_ppe_foe_verify_entry() is called with hash >= ppe_num_entries/2,
it writes beyond the allocated buffer, causing heap buffer overflow and
potential kernel crash.
Fixes: 6d5b601d52 ("net: airoha: ppe: Dynamically allocate foe_check_time array in airoha_ppe struct")
Signed-off-by: Wayen Yan <win847@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/178161119471.2163752.14373384830691569758@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a node is created via rate-new with tc-bw and a parent node,
devlink_nl_rate_set() executes the sequence of ops. It bails out on the
first failure and doesn't rollback anything. For most things that is
fine (setting some numbers), but the parent set can leak if there's
another failure after that.
That is precisely what happens when parent setting isn't the last block
in the function. After the referenced "Fixes" commit, when tc-bw fails
to be set the function bails out after having set the parent and
incremented its refcount.
There are two callers:
- devlink_nl_rate_set_doit() is fine, it just reports the error.
- but devlink_nl_rate_new_doit() frees the newly created node and leaks
the parent refcnt.
Fix that by reordering the blocks so parent setting is last and adding a
comment explaining this so future modification preserve the ordering
(hopefully).
Fixes: 566e8f108f ("devlink: Extend devlink rate API with traffic classes bandwidth management")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260616110633.1449432-3-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the original commit the function bails out on kstrdup failure,
forgetting to decrement the refcnt of the parent.
Fix that by moving the parent refcnt setting after kstrdup.
Fixes: caba177d7f ("devlink: Enable creation of the devlink-rate nodes from the driver")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260616110633.1449432-2-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block.
Fixes: 893ae97214 ("octeontx2-af: cn10k: Support configurable LMTST regions")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB78811656934E713B77DA6CEDAFE62@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pch_gbe_alloc_tx_buffers() allocates an skb for each TX descriptor and
then passes the returned pointer to skb_reserve(). If netdev_alloc_skb()
fails, skb_reserve() dereferences NULL.
Make pch_gbe_alloc_tx_buffers() return an error when an skb allocation
fails. On failure, let pch_gbe_alloc_tx_buffers() clean the partially
allocated TX ring before returning the error. While bringing the device
up, release the RX buffer pool through a shared cleanup helper before
unwinding the IRQ setup.
Cc: stable+noautosel@kernel.org # untested fix to unlikely error path
Fixes: 77555ee722 ("net: Add Gigabit Ethernet driver of Topcliff PCH")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260615125043.3537046-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make @empty have static storage duration (like net/sysctl_net.c does)
to avoid storing a bad pointer, and keep consistent with
__register_sysctl_table @table 'should not be free'd after registration'.
Note that this is _not_ a bug, since size is 0 the pointer will
never get deferenced.
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260616064053.690154-1-guanwentao@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit refactored the prechangeupper event handling but
failed to actually return an error in case
dpaa2_switch_prevent_bridging_with_8021q_upper() detected a 802.1q upper
on a port which tries to join a bridge. Fix this by returning err
instead of 0.
Fixes: 45035febc4 ("net: dpaa2-switch: refactor prechangeupper sanity checks")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260616105430.3725910-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
receive_big() bounds the device-announced length by
(big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose:
add_recvbuf_big() sets sg[1] to start at offset
sizeof(struct padded_vnet_hdr) into the first page, so the chain
actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) +
big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the
check allows for the common hdr_len == 12 case.
A malicious virtio backend can announce a len in that gap. page_to_skb()
then walks one frag past the page chain, storing a NULL page->private
into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds
write past the static frag array and a NULL frag handed up the rx path.
Bound len by the size add_recvbuf_big() actually advertised.
Fixes: 0c71670396 ("virtio-net: fix received length check in big packets")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20260616042837.2249468-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a tc-testing case that sends IPv4 fragments through act_ct on clsact
egress while a root prio qdisc is present on the transmit path.
The test verifies that packet processing and qdisc accounting continue
to work after conntrack defragmentation, covering tc_skb_cb preservation
across defragmentation.
Signed-off-by: Zihan Xi <xizh2024@lzu.edu.cn>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/53493549fdbcb2de25788b7894c56baadbc5fede.1781358692.git.xizh2024@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving
and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases
the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through
act_ct therefore loses qdisc metadata such as pkt_segs and can trigger
WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled.
Save and restore the full tc_skb_cb around nf_ct_handle_fragments(),
matching the pattern used by ovs_ct_handle_fragments().
Fixes: ec624fe740 ("net/sched: Extend qdisc control block with tc control block")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Zihan Xi <xizh2024@lzu.edu.cn>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/510c51217fd7aaf29c6dc298bab8d643fe229b1c.1781358692.git.xizh2024@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SCTP_DIAG endpoint dumping was traversing endpoint address lists without
holding lock_sock(), while those lists could change concurrently via
socket operations (e.g., bindx changes). This creates a race where
nla_reserve() counts addresses under RCU protection, but the subsequent
copy may see fewer entries, potentially leaking uninitialized memory to
userspace.
Fix this by:
- Taking a reference on each endpoint during hash traversal
- Moving socket operations (lock_sock()) outside read_lock_bh()
- Serializing address list access during dump
- Reworking sctp_for_each_endpoint() to support restart-based traversal
with (net, pos) tracking
Also:
- Add WARN_ON_ONCE() for inconsistent address counts
- Fix idiag_states filtering for LISTEN vs association cases
- Skip dumping endpoints being freed (ep->base.dead)
- Move dump position tracking into iterator, removing cb->args[4] and
its comment for sctp_ep_dump().,
- Update the comment for cb->args[4] and remove the comment for unused
cb->args[5] for sctp_sock_dump().
Note: traversal is restart-based and may re-scan buckets multiple times,
but this is acceptable due to small bucket sizes and required to support
sleeping-safe callbacks.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative.
Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com>
Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/4c1b49ab87e0f7d552ebd8172b364b1994e913c9.1781552190.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
psample open codes nla_put() presumably to avoid wiping
the data with 0s just to override it with packet data.
This open coding is missing clearing the pad, however,
each netlink attr is padded to 4B and data_len may
not be divisible by 4B.
Fixes: 6ae0a62861 ("net: Introduce psample, a new genetlink channel for packet sampling")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260616003046.1099490-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_query_mtppse() reads the Event Trigger Pin (MTPPSE) register but
reads the returned arm and mode values from the input buffer 'in'
instead of the output buffer 'out', so it always returns the values
that were written rather than the actual hardware state, making the
query useless.
The function has no in-tree callers. Remove it rather than fix it.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260615140406.1828-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP
socket state. The sysctl is stored as an `int` but copied into the
`u32` `tp->reordering` field for new sockets, so negative writes wrap
to large values.
With `tcp_mtu_probing=2`, the wrapped value can overflow the
`tcp_mtu_probe()` size calculation and drive the MTU probing path into
an out-of-bounds read. Route `tcp_reordering` writes through
`proc_dointvec_minmax()` and require it to be at least 1. Also require
`tcp_max_reordering` to be at least 1 so the configured maximum cannot
become negative either.
When registering the table for a non-init network namespace, relocate
`extra2` pointers that refer into `init_net.ipv4` so the
`tcp_reordering` upper bound follows that namespace's
`tcp_max_reordering`.
Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`.
This keeps the send queue and window checks from being bypassed through
signed integer overflow.
Fixes: 91cc17c0e5 ("[TCP]: MTUprobe: receiver window & data available checks fixed")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/1a5b7e1ef4d70fbad8c8ee0b82d8405f3c964a3d.1781395200.git.bronzed_45_vested@icloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ehea_create_device_sysfs() creates probe_port and then remove_port. If
the second device_create_file() fails, the helper returns the error but
leaves probe_port installed even though probe treats the sysfs setup as
failed.
Remove probe_port on the remove_port creation failure path so the helper
leaves no partial sysfs state behind.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260615070033.43461-1-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_install_mcam_drop_rule() used dev_err() after a successful
rvu_mbox_handler_npc_mcam_write_entry() call, so normal installs appeared
as errors in dmesg. Use dev_dbg() for the success path and keep dev_err()
for real failures.
Fixes: 3571fe07a0 ("octeontx2-af: Drop rules for NPC MCAM")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260615033157.535237-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The send-queue timestamp ring is allocated with qmem_alloc() when
timestamping is used, but otx2_free_sq_res() never freed sq->timestamps,
leaking that memory across ifdown and device removal. Add the missing
qmem_free() alongside the other SQ companion buffers.
Fixes: c9c12d339d ("octeontx2-pf: Add support for PTP clock")
Cc: Aleksey Makarov <amakarov@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260615030704.504536-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID
using task_pid_nr(), which returns the PID in the initial pid namespace.
NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family
is netnsok, so a caller in a child pid namespace can issue it. That caller
then sees the kthread's global PID, even though the kthread is not visible
in its pid namespace, where the value should be 0.
Translate the PID through the caller's pid namespace, the same way commit
3799c25709 ("io_uring/fdinfo: translate SqThread PID through caller's
pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both
run synchronously in the caller's context, so task_active_pid_ns(current) is
the caller's pid namespace.
Fixes: db4704f4e4 ("netdev-genl: Add PID for the NAPI thread")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20260615171736.1709318-1-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Everything configured in phylink_config it's assumed to be set before
calling phylink_create() to permit correct parsing of all the different
modes and capabilities.
Commit 51cf06ddaf ("net: ethernet: mtk_eth_soc: add support for MT7988
internal 2.5G PHY") while introducing support for 2.5G phy for MT7988,
probably due to an auto-rebase, placed the configuration of the INTERNAL
interface mode for the supported_interfaces for phylink_config right after
phylink_create() introducing a possible problem with supported interfaces
parsing.
While this doesn't currently create any problem/bug, move setting this bit
before phylink_create() to prevent any possible regression in future code
change in phylink core.
Fixes: 51cf06ddaf ("net: ethernet: mtk_eth_soc: add support for MT7988 internal 2.5G PHY")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20260615151106.15438-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maoyi Xie says:
====================
net: require CAP_NET_ADMIN in the device netns for tunnel changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the tunnel link netns t->net. They differ once the device is created in
or moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in the link netns can rewrite a tunnel
that lives in the link netns. Commit 8b484efd5c ("ip6: vti: Use
ip6_tnl.net in vti6_siocdevprivate().") added the same check on the
ioctl path. This series adds it on the RTM_NEWLINK path.
Each changelink is gated at the top of the op, before any attribute is
parsed, because the per-type parsers can update live tunnel fields first
(for example ipgre_netlink_parms() sets t->collect_md). The check is
skipped when the link netns is dev_net(dev), where the rtnl path already
checked the cap.
The check goes through a new helper, rtnl_dev_link_net_capable(), added
in patch 1 next to rtnl_get_net_ns_capable() in net/core/rtnetlink.c.
Tested on net/main. For every tunnel type in the series a migrated
fake-root changelink is rejected with EPERM. For vti6 SIOCGETTUNNEL
confirms the link netns hash is left unchanged. Legit non-migrated
changelinks still succeed.
v5: https://lore.kernel.org/20260611062814.2528793-1-maoyixie.tju@gmail.com
v4: https://lore.kernel.org/20260609163110.1717419-1-maoyixie.tju@gmail.com
v3: https://lore.kernel.org/20260604125055.3254652-1-maoyixie.tju@gmail.com
v2: https://lore.kernel.org/20260601034148.1272080-1-maoyixie.tju@gmail.com
v1: https://lore.kernel.org/20260527070824.2677331-1-maoyixie.tju@gmail.com
====================
Link: https://patch.msgid.link/20260612085941.3158249-1-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xfrmi_changelink() operates on at most two netns, dev_net(dev) and the
interface link netns xi->net. They differ once the device is created in
or moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in xi->net can rewrite an interface that
lives in xi->net.
Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed.
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/
Fixes: f203b76d78 ("xfrm: Add virtual xfrm interfaces")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260612085941.3158249-8-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vti6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate vti6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed.
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/
Fixes: 61220ab349 ("vti6: Enable namespace changing")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260612085941.3158249-7-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6gre_changelink() and ip6erspan_changelink() operate on at most two
netns, dev_net(dev) and the tunnel link netns t->net. They differ once
the device is created in or moved to a netns other than the one the
request runs in. The rtnl changelink path checks CAP_NET_ADMIN only
against dev_net(dev), so a caller privileged there but not in t->net can
rewrite a tunnel that lives in t->net.
Gate both ops on rtnl_dev_link_net_capable() at their top, before any
attribute is parsed.
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/
Fixes: 690afc165b ("net: ip6_gre: fix moving ip6gre between namespaces")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260612085941.3158249-6-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_tnl_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ip6_tnl_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed.
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/
Fixes: 0bd8762824 ("ip6tnl: add x-netns support")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260612085941.3158249-5-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vti_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate vti_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed.
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/
Fixes: 895de9a348 ("vti4: Enable namespace changing")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260612085941.3158249-4-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipip_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ipip_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed.
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/
Fixes: 6c742e714d ("ipip: add x-netns support")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260612085941.3158249-3-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the tunnel link netns t->net. They differ once the device is created in
or moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in
net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is
skipped when the link netns is dev_net(dev), where the rtnl path already
checked it. The other patches in this series use the same helper.
Gate ipgre_changelink() and erspan_changelink() with it, at the top of
the op before any attribute is parsed, because the parsers update live
tunnel fields first. ipgre_netlink_parms() sets t->collect_md before
ip_tunnel_changelink() runs.
Commit 8b484efd5c ("ip6: vti: Use ip6_tnl.net in
vti6_siocdevprivate().") added the same check on the ioctl path. This
adds it on RTM_NEWLINK.
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/
Fixes: b57708add3 ("gre: add x-netns support")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260612085941.3158249-2-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Set User Byte to Save command has three subject bytes.
The PD692x0 protocol guides defines SUB2 with value 0x4e, while SUB1
carries the NVM user byte.
Template only initialized SUB and SUB1.
Fill SUB2 explicitly so the command matches the documented layout.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260611102517.445549-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core & protocols
----------------
- Work on removing rtnl_lock protection throughout the stack continues.
In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even tho
user space wants a dump of all netdevs, most of the time, the OOO
programming model results in repeating the dump for each netdev.
Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on retransmit
timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 > 40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot express
reqid changes or migrate Transport mode selectors. The new interface
identifies the SA via SPI and mark, supports reqid changes, address
family changes, encap removal, and uses an atomic create+install
flow under x->lock to prevent SN/IV reuse during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff
----------------
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto API
users, since it changed crypto transformation objects into reference-
-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the global
crypto API as obsolete and insecure.
Wireless
--------
- Major rework of station bandwidth handling, fixing issues with lower
capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter
---------
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions
---------
- Remove TLS + sockmap integration. TLS wants to pin user pages
to avoid a copy, and sockmap wants to write to the input stream.
More work on this integration is clearly needed, and we can't find
any users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from
the vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM needs,
AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit kernel)
interface in user namespaces. To be deleted completely, soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers
-------
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit).
- bonding: add knob to strictly follow 802.3ad for link state.
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection, tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to 60%
win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for control
objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS table
size, even when table is configured by the user
- increase the max RSS table size for even traffic distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet (EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oNfE
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
syzbot reported use-after-free of net->ipv4.rules_ops. [0]
It can be reproduced with these commands:
while true; do
ip netns add ns1
ip -n ns1 link set dev lo up
ip -n ns1 address add 192.0.2.1/24 dev lo
ip -n ns1 link add name dummy1 up type dummy
ip -n ns1 address add 198.51.100.1/24 dev dummy1
ip -n ns1 rule add ipproto tcp sport 12345 table 12345
ip -n ns1 fou add port 5555 ipproto 47 local 192.0.2.1 peer 198.51.100.2 peer_port 54321
ip netns del ns1
done
The cited commit moved fib4_rules_exit() earlier to ->exit_rtnl(),
but the kernel socket destroyed in ->exit() could eventually reach
__fib_lookup().
I left fib4_rules_exit() in ->exit_rtnl() because fib4_rule_delete()
calls fib_unmerge(), which requires RTNL.
However, when ->delete() is called, ->configure() has already been
called, thus fib_unmerge() in ->delete() has no effect.
Let's remove fib_unmerge() in fib4_rule_delete() and move
fib4_rules_exit() to ->exit().
Many thanks to Ido Schimmel for providing the nice repro very quickly.
Note that we can make fib_rules_ops.delete() return void once
net-next opens.
[0]:
BUG: KASAN: slab-use-after-free in fib_rules_lookup+0x15e/0xeb0 net/core/fib_rules.c:321
Read of size 8 at addr ffff88804ec4c680 by task kworker/u8:21/12641
CPU: 0 UID: 0 PID: 12641 Comm: kworker/u8:21 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026
Workqueue: netns cleanup_net
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description+0x55/0x1e0 mm/kasan/report.c:378
print_report+0x58/0x70 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
fib_rules_lookup+0x15e/0xeb0 net/core/fib_rules.c:321
__fib_lookup+0x106/0x210 net/ipv4/fib_rules.c:96
ip_route_output_key_hash_rcu+0x294/0x2720 net/ipv4/route.c:2811
ip_route_output_key_hash+0x18d/0x2a0 net/ipv4/route.c:2702
__ip_route_output_key include/net/route.h:169 [inline]
ip_route_output_flow+0x2a/0x150 net/ipv4/route.c:2929
ip4_datagram_release_cb+0x89d/0xbe0 net/ipv4/datagram.c:118
release_sock+0x206/0x260 net/core/sock.c:3861
inet_shutdown+0x2b1/0x390 net/ipv4/af_inet.c:950
udp_tunnel_sock_release+0x6d/0x80 net/ipv4/udp_tunnel_core.c:197
fou_release net/ipv4/fou_core.c:562 [inline]
fou_exit_net+0x17d/0x1f0 net/ipv4/fou_core.c:1230
ops_exit_list net/core/net_namespace.c:199 [inline]
ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:252
cleanup_net+0x572/0x810 net/core/net_namespace.c:702
process_one_work kernel/workqueue.c:3314 [inline]
process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3397
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3478
kthread+0x389/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Fixes: 759923cf03 ("ipv4: fib: Convert fib_net_exit_batch() to ->exit_rtnl().")
Reported-by: syzbot+965506b59a2de0b6905c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6a315824.b0403584.28d0ff.0000.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260616191359.4142661-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup().
The root cause is a race condition where packets can escape the backlog
flushing during device unregistration (e.g., during netns exit).
Commit e9e4dd3267 ("net: do not process device backlog during unregistration")
introduced a lockless netif_running() check in enqueue_to_backlog() to
prevent queuing packets to an unregistering device.
However, this creates a TOCTOU race window.
A lockless transmitter (like veth_xmit) can pass
the check before dev_close() clears IFF_UP. If the transmitter is then
delayed, flush_all_backlogs() can run and finish before the transmitter
grabs the backlog lock and queues the packet. The packet then escapes
the flush and triggers UAF later when processed.
Fix this by moving the netif_running() check inside the backlog lock.
This serializes the check with the flush work (which also grabs the lock).
We then either queue the packet before the flush runs (so it gets flushed),
or check netif_running() after the flush/close completes (so it gets dropped).
Fixes: e9e4dd3267 ("net: do not process device backlog during unregistration")
Reported-by: syzbot+965506b59a2de0b6905c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a315824.b0403584.28d0ff.0000.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260616141317.407791-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge in late fixes in preparation for the net-next PR.
Conflicts:
net/tls/tls_sw.c
406e8a651a ("net: skmsg: preserve sg.copy across SG transforms")
79511603a6 ("tls: remove dead sockmap (psock) handling from the SW path")
drivers/net/ethernet/microsoft/mana/mana_en.c
f8fd56977e ("net: mana: guard TX wq object destroy with INVALID_MANA_HANDLE check")
d07efe5a6e ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
https://lore.kernel.org/ajAPXu-C_PuTgV-a@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
