When a dpll_pin is shared across multiple dpll_device instances and
those devices are being unregistered (e.g. during driver module removal),
a NULL pointer dereference can occur in dpll_msg_add_pin_ref_sync().
This happens under the following conditions:
- A pin is registered with two or more dpll devices (dpll_A, dpll_B)
- The pin has ref_sync pairs with other pins
- During unregistration of dpll_A's pins, a ref_sync partner pin is
unregistered first, removing it from dpll_A->pin_refs
- But since the partner pin is still registered with dpll_B, its
dpll_refs is not empty, so dpll_pin_ref_sync_pair_del() does NOT
run and the partner stays in the pin's ref_sync_pins xarray
- When the pin itself is then unregistered from dpll_A, the delete
notification calls dpll_msg_add_pin_ref_sync() which finds the
partner in ref_sync_pins, passes dpll_pin_available() (partner is
still registered with dpll_B), but dpll_pin_on_dpll_priv(dpll_A,
partner) returns NULL because partner was already removed from
dpll_A->pin_refs
- The NULL priv pointer is passed to the driver's ref_sync_get
callback, which dereferences it
BUG: kernel NULL pointer dereference, address: 0000000000000034
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:zl3073x_dpll_input_pin_ref_sync_get+0x73/0x80 [zl3073x]
Call Trace:
dpll_msg_add_pin_ref_sync+0xb8/0x200
dpll_cmd_pin_get_one+0x3b6/0x4b0
dpll_pin_event_send+0x72/0x140
__dpll_pin_unregister+0x5a/0x2b0
dpll_pin_unregister+0x49/0x70
Fix this by skipping ref_sync pins whose priv pointer cannot be resolved
for the current dpll device.
Fixes: 58256a26bf ("dpll: add reference sync get/set")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260710193625.1378822-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Release the TIME_WAIT socket reference and jump to discard_it
upon PSP policy failure in both IPv4 and IPv6 receive paths.
This prevents a memory leak of tcp_tw_bucket structures.
Fixes: 659a2899a5 ("tcp: add datapath logic for PSP with inline key exchange")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260710181317.4060230-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Workloads that repeatedly allocate and release mkeys carrying TPH
steering-tag hints (e.g. churning RDMA MRs) leak one
struct mlx5_st_idx_data per cycle; kmemleak flags it as unreferenced
and the kmalloc slab grows over time.
When the last reference to an ST table entry is dropped,
mlx5_st_dealloc_index() removed the entry from idx_xa but the backing
mlx5_st_idx_data allocation was never freed.
Free idx_data after the xa_erase() so the lifetime of the bookkeeping
struct matches the lifetime of the ST entry it tracks.
Cc: stable@vger.kernel.org
Fixes: 888a7776f4 ("net/mlx5: Add support for device steering tag")
Reviewed-by: Michael Gur <michaelgur@nvidia.com>
Signed-off-by: Zhiping Zhang <zhipingz@meta.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260702222507.1234467-1-zhipingz@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQSl+MghEFFAdY3pYJLMOmT6rpmt0gUCaljFDxMcbWtsQHBlbmd1
dHJvbml4LmRlAAoJEMw6ZPquma3ScvEBAMN4/7N+Es+yBfeHYu2A+6b+5qeW+4Px
WtxSffc9OxxtAP9H/UhgxnZdzgCalXipwZGjwSKgm87vPU8H1GDKlX3LBw==
=EJTl
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-7.2-20260716' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-07-16
this is a pull request of 19 patches for net/main.
The first patch is by Alexander Hölzl and fixes the Kconfig
description of the vxcan driver.
Next patch by Fan Wu fixes the tear down order in the esd_usb driver.
Followed by a patch by Oliver Hartkopp that adds missing locking for
the raw flags in the CAN_RAW protocol.
Shuhao Fu's patch for the j1939 protocol fix lockless
local-destination check.
Stéphane Grosjean updates their email address.
The next 11 patches all target the CAM Broadcast Manager protocol. One
contributed by Lee Jones the remaining ones by Oliver Hartkopp. They
fix several concurrency and locking issues found by various bots.
The last 3 patches are also by Oliver Hartkopp fixing concurrency and
locking issues found by various bots in the CAN ISO Transport
Protocol.
linux-can-fixes-for-7.2-20260716
* tag 'linux-can-fixes-for-7.2-20260716' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: isotp: serialize TX state transitions under so->rx_lock
can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER
can: isotp: use unconditional synchronize_rcu() in isotp_release()
can: bcm: track a single source interface for ANYDEV timeout/throttle ops
can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()
can: bcm: fix stale rx/tx ops after device removal
can: bcm: add missing device refcount for CAN filter removal
can: bcm: validate frame length in bcm_rx_setup() for RTR replies
can: bcm: extend bcm_tx_lock usage for data and timer updates
can: bcm: add missing rcu list annotations and operations
can: bcm: fix CAN frame rx/tx statistics
can: bcm: add locking when updating filter and timer values
can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure
can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF
can: peak: Modification of references to email accounts being deleted
can: j1939: fix lockless local-destination check
can: raw: add locking for raw flags bitfield
can: esd_usb: kill anchored URBs before freeing netdevs
can: vxcan: Kconfig: fix description stating no local echo provided
====================
Link: https://patch.msgid.link/20260716155528.809908-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJdBAABCABHFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmpRAaIbFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyDRxmd0BzdHJsZW4uZGUACgkQcJGo2a1f9gAQJw/+
Kj3gIsC+IWVsyF4zVvQrYlNkE6SELujsS7OkzY2voyaMS2waA2awl2Wep7G5Z6B7
o36vez8ajnMCvGzfJKOtLgo2H32qxW4XzRuJVROlHRgSpJjASVTP9WREK4pCmfJr
cU/D8YujTMxoEcdaIjDgjKyDogMtfbEyUqbiguLuym9NEX4izXXMv9tfWlFfWDtH
RhmDV25WXLTa/h1Iz7rl2m1FPZ48oB7VOaar0seIPYF+kQ+tVr0CsSnfx22uHfoj
H2g8ahfjjDhyPJTraDjQbdyenW5TzZ3ZzoBpwlpRynbKwKgLqnFdCBtG/vdm0SMM
ZOfITT0aU8/tyh/zUm3pOmhIQJpGrxQC7ox0Jya+wc6tNT9ixKAocfUm/ftSuZBD
EmH+YlfdQivEcaiP9GlPyGKFp0xRlAtDjbPiA5ZZXJtCNS17KRHNmc/GRIBnhqJu
sv8c5Qxj3xppoBbTENKy0WI81L200CEpBrm+7qUgQj+TRdXzCaLCL7KTyLlmKxQa
mor1TPDbrs5FEMWVaPJLloKSlKCm0forFnuRIxD3VYLQxqeomHY4CaV+vNjdMJDC
4oV64Z1XVDR5SjtA+/MmX07FdTBdlGDzBZQugwQyhbM+iHEHBmvxXkyMEBpVBN2x
U9XICr1PBibENZAyS/IKYW8ilfPtkUiW6Jgyk5W7bIw=
=eXsP
-----END PGP SIGNATURE-----
Merge tag 'nf-26-07-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*.
These are fixes for bugs except patches 6 and 9 which fix issues added in
last PR and 7.1-rc1.
1) Reject unsupported target families in xt_nat_checkentry().
From Wyatt Feng.
2) Fix inverted time_after() check in ecache_work_evict_list().
Causes pointless work rescheds and thus way longer time to
clear the pending event backlog. From Yizhou Zhao.
3) Fix a use-after-free in br_ip6_fragment() caused by a dangling prevhdr
pointer. From Xiang Mei.
4) Fix incorrect conntrack zone comparison in nf_conncount tuple
deduplication. Pass IP_CT_DIR_ORIGINAL, not zone direction.
From Yizhou Zhao.
5) Add bridge tunnel flowtable regression test for a bug that
got fixed in the previous PR. From Zhengyang Chen.
6) Use the correct direction when setting up tunnel routes in the flowtable
xmit path. From Pablo Neira Ayuso. This fixes a bug added in the
previous PR.
7) Reload IP header after potential skb head reallocation in IPVS.
8) Fix incorrect IPv6 transport offsets in TCP application code. Correct the
ICMPv6 header offset to ensure proper checksumming with extension headers,
from Julian Anastasov. this is a followup to the previous PR.
9) Remove null-termination requirement for xt_physdev masks, this broke
device names with 15 characters.
netfilter pull request nf-26-07-10
* tag 'nf-26-07-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: xt_physdev: masks are not c-strings
ipvs: fix more places with wrong ipv6 transport offsets
ipvs: reload ip header after head reallocation
netfilter: flowtable: use correct direction to set up tunnel route
selftests: netfilter: add bridge tunnel flowtable regression
netfilter: nf_conncount: fix zone comparison in tuple dedup
netfilter: bridge: fix stale prevhdr pointer in br_ip6_fragment()
netfilter: ecache: fix inverted time_after() check
netfilter: xt_nat: reject unsupported target families
====================
Link: https://patch.msgid.link/20260710143733.29741-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oliver Hartkopp <socketcan@hartkopp.net> says:
As sashiko-bot was not able to check the second patch this bundle is
re-posted with b4 preparation.
Link: https://patch.msgid.link/20260712-isotp-fixes-v10-0-793a1b1ce17f@hartkopp.net
[mkl: added stable@k.o on Cc, converted Link: -> Closes:]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The TX state machine (so->tx.state) is driven from three contexts:
sendmsg() claiming and progressing a transfer, the RX path consuming
Flow Control/echo frames, and two hrtimers timing out a stalled
transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with
hrtimer_cancel() calls made under so->rx_lock elsewhere left windows
where a frame or timer callback could act on a state that had already
moved on, corrupting an unrelated transfer.
so->rx_lock now covers the full lifecycle of a TX claim: sendmsg()
takes it to check so->tx.state is ISOTP_IDLE, switch it to
ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's
timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf()
already run under this lock via isotp_rcv(), and isotp_rcv_echo() now
takes it itself, so none of them can ever observe a transfer mid-claim.
This also means a transfer can no longer be handed to sendmsg()'s
cleanup paths (signal or send error) while another thread is
concurrently claiming or finishing it, so those paths can cancel
timers and reset the state unconditionally.
isotp_release() claims the socket the same way, so a racing sendmsg()
sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending.
Only the hrtimer callbacks stay outside so->rx_lock, since they run
under so->rx_lock's cancellation elsewhere and taking it themselves
would deadlock. so->tx_gen lets them recognize whether the transfer
they timed out is still the one currently active, so they don't
report an error against a transfer that has since completed or been
superseded.
Fixes: e057dd3fc2 ("can: add ISO 15765-2:2016 transport protocol")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/linux-can/20260710142146.BDAE61F000E9@smtp.kernel.org/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260712-isotp-fixes-v10-3-793a1b1ce17f@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
isotp_release() looked up the bound network device via dev_get_by_index()
using the stored ifindex. During device unregistration the device is
unlisted from the ifindex hash before the NETDEV_UNREGISTER notifier
chain runs, so a concurrent isotp_release() could find no device, skip
can_rx_unregister() entirely, and still proceed to free the socket.
Since isotp_release() had already removed itself from the isotp
notifier list at that point, isotp_notify() would never get a chance to
clean up either, leaving a stale CAN filter that keeps pointing at the
freed socket.
Fix this the same way raw.c already does: hold a tracked reference to
the bound net_device in the socket (so->dev/so->dev_tracker) from
bind() onward instead of re-resolving it from the ifindex, and
serialize bind()/release() with rtnl_lock() so that so->dev is always
consistent with what the NETDEV_UNREGISTER notifier sees. so->dev
stays valid regardless of ifindex-hash unlisting, and is only ever
cleared by whichever of isotp_release()/isotp_notify() gets there
first, so the filter is always removed exactly once.
isotp_bind() now rejects a (re)bind with -EAGAIN while so->[tx|rx].state
isn't ISOTP_IDLE yet, so a timer left running by a prior
NETDEV_UNREGISTER can't act on a newly bound so->ifindex. Both checks
share the same lock_sock() section, so there is no window in which a
concurrent isotp_notify() clearing so->bound could be missed.
Fixes: e057dd3fc2 ("can: add ISO 15765-2:2016 transport protocol")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/linux-can/20260707101420.47F261F000E9@smtp.kernel.org/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260712-isotp-fixes-v10-2-793a1b1ce17f@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister()
and clears so->bound without waiting for a grace period. isotp_release()
uses so->bound to decide whether it needs to call synchronize_rcu()
before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it
skips that synchronize_rcu() and can cancel the timer while an
in-flight isotp_rcv() is still executing and about to re-arm it via
isotp_send_fc(), leading to a use-after-free timer callback on the
freed socket.
sakisho-bot remarked a problem with rtnl_lock held in isotp_notify(),
therefore make isotp_release() always call synchronize_rcu() before
cancelling the timers, regardless of so->bound. This still closes the
original race (isotp_notify() clearing so->bound without waiting for
in-flight isotp_rcv() callers before isotp_release() cancels the RX
timer) without adding any RCU wait to the netdevice notifier path.
Fixes: 14a4696bc3 ("can: isotp: isotp_release(): omit unintended hrtimer restart on socket release")
Closes: https://lore.kernel.org/linux-can/20260707085210.6B6C01F000E9@smtp.kernel.org/
Reported-by: Nico Yip <zdi-disclosures@trendmicro.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260712-isotp-fixes-v10-1-793a1b1ce17f@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp <socketcan@hartkopp.net> says:
as there were different patches flying arround to fix CAN_BCM issues and AI
assisted stuff pop's up again and again, I've created this collection to be
applied.
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-0-562f7e3e42da@hartkopp.net
[mkl: added stable@k.o on Cc, converted Link: -> Closes:]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or
throttle timer has no defined semantics when matching frames arrive
from several interfaces: bcm_rx_handler() can run concurrently for
the same op on different CPUs, racing hrtimer_cancel()/
bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing
spurious RX_TIMEOUT notifications and last_frames corruption. The
same concurrency lets throttled multiplex frames from different
interfaces clobber the single rx_ifindex/rx_stamp fields shared by
the op.
Add op->if_detected to track the first interface that delivers a
matching frame while a timeout/throttle timer is configured, and
reject frames from any other interface for that op. The claim is
decided in bcm_rx_handler() before hrtimer_cancel() touches
op->timer, so a rejected frame can never disturb the claimed
interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME,
independent of kt_ival1/kt_ival2, since those may briefly hold a
stale value from an earlier non-RTR configuration.
The claim is released in bcm_notify() on NETDEV_UNREGISTER and in
bcm_rx_setup() when SETTIMER reconfigures the timer values.
A (re-)claim is only possible on CAN devices in NETREG_REGISTERED
dev->reg_state to cover the release in bcm_notify() where reg_state
becomes NETREG_UNREGISTERING until synchronize_net().
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/linux-can/20260709105031.1A39C1F000E9@smtp.kernel.org/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-11-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
For an rx op subscribed on all interfaces (ifindex == 0), the same op
is registered once in the shared per-netns wildcard filter list, so
bcm_rx_handler() can run concurrently on different CPUs for frames
arriving on different net devices.
op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was
taken, allowing concurrent writers to race each other - including a torn
store of the 64-bit rx_stamp on 32-bit platforms.
Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex
of the very same frame whose content it is delivering. So the assignment
is placed in the same unbroken bcm_rx_update_lock section as the content
comparison.
As a side effect, the RTR-request frame feature (which never reach
bcm_send_to_user()) no longer updates rx_stamp/rx_ifindex, since only
the notification path needs them.
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/linux-can/20260707145135.5BC831F00A3A@smtp.kernel.org/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-10-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
RX: an RX_SETUP update(!) for an existing op skipped can_rx_register()
unconditionally, even when a concurrent NETDEV_UNREGISTER had already
torn down its registration (op->rx_reg_dev == NULL). This silently
did not re-enable frame delivery for that updated filter. bcm_rx_setup()
now re-registers in that case, while leaving rx_ops with ifindex = 0
(all CAN devices) which never carry a tracked rx_reg_dev registered as-is.
TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving
tx_ops with an active cyclic transmission re-arming its hrtimer
indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer
prevents the runaway timer and any injection into a later reused ifindex,
since nothing else calls bcm_can_tx() for the op until an explicit
TX_SETUP update re-arms it.
Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops,
the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup()
always rejects ifindex 0, so clearing it would strand the op: neither a
later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could
ever find it again, since both require an exact ifindex match.
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/linux-can/20260708094536.DDF821F00A3A@smtp.kernel.org/
Closes: https://lore.kernel.org/linux-can/20260708154039.347ED1F000E9@smtp.kernel.org/
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-9-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
sashiko-bot remarked a problem with a concurrent device unregistration
in isotp.c which also is present in the bcm.c code. A former fix for raw.c
commit c275a176e4 ("can: raw: add missing refcount for memory leak fix")
introduced a netdevice_tracker which solves the issue for bcm.c too.
bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on
dev_get_by_index(ifindex) to re-find the device for an rx_op before
unregistering its filter. If a concurrent NETDEV_UNREGISTER has already
unlisted the device from the ifindex table, that lookup fails and
can_rx_unregister() is silently skipped, leaving a stale CAN filter
pointing at the soon-to-be-freed bcm_op/socket.
Hold a netdev_hold()/netdev_put() tracked reference on op->rx_reg_dev
from the moment the rx filter is registered in bcm_rx_setup() until it
is unregistered in bcm_rx_unreg(), and use that reference directly in
bcm_release() and bcm_delete_rx_op() instead of re-looking the device
up by ifindex.
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260707094716.63578-1-socketcan@hartkopp.net
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-8-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
bcm_tx_setup() validates cf->len against the CAN/CAN FD DLC limits
before installing frames for TX_SETUP, but bcm_rx_setup() never did
the same for the RTR-reply frame configured via RX_SETUP with
RX_RTR_FRAME.
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-7-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stage new CAN frame content for an existing tx op into a kmalloc()'d
buffer and validate it there, mirroring the approach already used in
bcm_rx_setup(). Only copy the validated data into op->frames while
holding op->bcm_tx_lock, so bcm_can_tx() and bcm_tx_timeout_handler()
can no longer observe a partially updated or unvalidated frame.
Add a missing error path for memcpy_from_msg() when copying CAN frame
data from userspace.
Also move the kt_ival1/kt_ival2/ival1/ival2 updates in bcm_tx_setup()
under op->bcm_tx_lock, and read kt_ival1/kt_ival2/count under the same
lock in bcm_tx_set_expiry() and bcm_tx_timeout_handler(), closing the
torn 64-bit ktime_t read on 32-bit platforms.
Fixes: c2aba69d0c ("can: bcm: add locking for bcm_op runtime updates")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-6-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
sashiko-bot remarked the missing use of list_add_rcu() in
bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure
when bcm_proc_show() traverses the bcm_op's under rcu_read_lock().
To cover all initial settings of the bcm_op's the list_add_rcu() calls
are moved to the end of the setup code.
While at it, also fix the mirroring removal side: bcm_release() called
bcm_remove_op() - which frees the op via call_rcu() - on ops that were
still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first.
Unlink each op with list_del_rcu() before handing it to bcm_remove_op(),
matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op().
Reported-by: sashiko-reviews@lists.linux.dev
Closes: https://lore.kernel.org/linux-can/20260610094654.A1FFE1F00893@smtp.kernel.org/
Fixes: dac5e62491 ("can: bcm: add missing rcu read protection for procfs content")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-5-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
KCSAN detected a data race within the bcm_rx_handler() when two CAN frames
have been simultaneously received and processed in a single rx op by two
different CPUs.
Use atomic operations with (signed) long data types to access the
statistics in the hot path to fix the KCSAN complaint.
Additionally simplify the update and check of statistics overflow by
using the atomic operations in separate bcm_update_[rx|tx]_stats()
functions. The rx variant runs under bcm_rx_update_lock to prevent
races when resetting the two rx counters; the tx variant runs under
bcm_tx_lock and only needs to guard its own counter's overflow.
As the rx path resets its values already at LONG_MAX / 100, there is
no conflict between the two locking domains (bcm_rx_update_lock vs.
bcm_tx_lock) even for ops that use both paths.
The rx statistics update and the frames_filtered update in
bcm_rx_changed() were previously performed in two separate
bcm_rx_update_lock sections. For an rx op subscribed on all interfaces
(ifindex == 0), bcm_rx_handler() can run concurrently on different
CPUs, so a counter reset by one CPU between these two sections could
leave frames_filtered larger than frames_abs on another CPU, producing
a bogus (even negative) reduction percentage in procfs. Update the
statistics in the same critical section as bcm_rx_changed() to close
this gap, which also removes the now unneeded extra lock/unlock pair
around the traffic_flags calculation.
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-4-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
KCSAN detected a simultaneous access to timer values that can be
overwritten in bcm_rx_setup() when updating timer and filter content
while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler()
run concurrently on incoming CAN traffic.
Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter
(nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new
per-op bcm_rx_update_lock, taken with the matching scope in the RX
handlers. memcpy_from_msg() is staged into a temporary buffer before the
lock is taken, since it can sleep and must not run under a spinlock.
hrtimer_cancel() is always called without bcm_rx_update_lock held, since
bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a
running callback would otherwise deadlock against the canceller.
Also close a related race: bcm_rx_setup() cleared the RTR flag in the
stored reply frame's can_id as a separate, unprotected step after the
frame content was already installed, so a concurrent bcm_rx_handler()
could transmit a stale reply with CAN_RTR_FLAG still set. Fold that
normalization into the initial frame preparation instead (on the staged
buffer for updates, directly on op->frames pre-registration for new
ops), so the installed frame is always atomically self-consistent.
bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected
snapshot of op->flags before deciding whether to call bcm_can_tx(),
but does not hold the lock across that call.
Also take a lock-protected snapshot of the currframe in bcm_can_tx()
to avoid partly overwrites by content updates in bcm_tx_setup().
Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset
op->currframe between the two locked sections in bcm_can_tx().
Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler().
kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it
cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock.
Fixes: c2aba69d0c ("can: bcm: add locking for bcm_op runtime updates")
Reported-by: syzbot+75e5e4ae00c3b4bb544e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/6975d5cf.a00a0220.33ccc7.0022.GAE@google.com/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-3-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking
lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all
mutate both fields under that same lock. Because the lockless reads
and the locked writes are unordered with respect to each other, a
racing bcm_notify() (device unregister) or bcm_connect() (concurrent
bind on another thread sharing the socket) can make bcm_sendmsg()
observe an inconsistent combination, e.g. a stale bound=1 together
with the now-cleared ifindex=0, silently turning a socket bound to a
specific CAN interface into one that also matches "any" interface.
Keep the lockless bo->bound check purely as a fast-path reject, and
move the ifindex read (and a bo->bound re-check) into the locked
section, where every writer already serializes. This removes the
possibility of observing the two fields torn against each other,
rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs
on two independently updated fields. Annotate the now-purely-lockless
bo->bound accesses consistently across all its write sites.
Also fix bcm_rx_setup() silently returning success when the target
device disappears concurrently instead of reporting -ENODEV, so a
broken RX op is no longer left registered as if it had succeeded.
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Reported-by: Ginger <ginger.jzllee@gmail.com>
Closes: https://lore.kernel.org/linux-can/CAGp+u1aBK8QVjsvAxM2Ldzep4rEbsP9x_pV3At4g=h1kVEtyhA@mail.gmail.com/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-2-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit f1b4e32aca ("can: bcm: use call_rcu() instead of costly
synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op()
with call_rcu() and introduced the RX_NO_AUTOTIMER flag.
However, this flag check was omitted for thrtimer in the packet rx
fast-path. During BCM RX operation teardown, a concurrent RCU reader
(bcm_rx_handler) can race and re-arm thrtimer via
bcm_rx_update_and_send() after call_rcu() has been scheduled. Once
the RCU grace period elapses, bcm_op is freed. The subsequently
firing thrtimer then dereferences the deallocated op, causing a UAF.
Adding flag checks to the rx fast-path (bcm_rx_update_and_send) does not
fully close the TOCTOU race and introduces latency for every CAN frame.
Conversely, calling hrtimer_cancel() directly inside the RCU callback
(softirq context) is fatal as hrtimer_cancel() can sleep, triggering
a "scheduling while atomic" panic.
Resolve this by deferring the timer cancellation and memory free to a
dedicated unbound workqueue (bcm_wq). The RCU callback now queues a
work item to bcm_wq, which safely cancels both timers and deallocates
memory in sleepable process context. A dedicated workqueue is used to
prevent system-wide WQ saturation and is cleanly flushed/destroyed
on module unload to avoid rmmod page faults.
Since the deferred work can now outlive the calling context by an
unbounded amount, also take a reference on op->sk when it is assigned
and drop it only once the deferred work has cancelled both timers, so a
socket can no longer be freed out from under a still-armed timer whose
callback (bcm_send_to_user()) dereferences op->sk.
Fixes: f1b4e32aca ("can: bcm: use call_rcu() instead of costly synchronize_rcu()")
Tested-by: Feng Xue <feng.xue@outlook.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-1-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Following the sale of PEAK-System France by HMS-Networks, this update is
intended to change all my @hms-networks.com email addresses to my new
@peak-system.fr address.
Signed-off-by: Stéphane Grosjean <s.grosjean@peak-system.fr>
Link: https://patch.msgid.link/20260410124251.40506-1-stephane.grosjean@free.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
j1939_priv.ents[].nusers is documented as protected by priv->lock, and
its updates already happen under that lock. j1939_can_recv() also reads
it under read_lock_bh(). However, j1939_session_skb_queue() and
j1939_tp_send() still read priv->ents[da].nusers without taking the
lock.
Those transport-side checks decide whether to set J1939_ECU_LOCAL_DST, so
they can race with j1939_local_ecu_get() and j1939_local_ecu_put() while
userspace is binding or releasing sockets concurrently with TP traffic.
This can misclassify TP/ETP sessions as local or remote and take the wrong
transport path.
Fix both transport paths by routing the destination-locality check through
a helper that reads ents[].nusers under read_lock_bh(&priv->lock).
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260419140614.GA4041240@chcpu16
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
With commit 890e5198a6 ("can: raw: use bitfields to store flags in
struct raw_sock") the formerly separate integer values have been integrated
into a single bitfield. This led to a read-modify-write operation when
changing a flag in raw_setsockopt() which now needs a locking to prevent
concurrent access.
Instead of adding a lock/unlock hell in each of the flag manipulations this
patch introduces a wrapper for a new raw_setsockopt_locked() function
analogue to the isotp_setsockopt[_locked]() approach in net/can/isotp.c
Fixes: 890e5198a6 ("can: raw: use bitfields to store flags in struct raw_sock")
Reported-by: Eulgyu Kim <eulgyukim@snu.ac.kr>
Closes: https://lore.kernel.org/linux-can/20260503112200.22727-1-eulgyukim@snu.ac.kr/
Tested-by: Eulgyu Kim <eulgyukim@snu.ac.kr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Tested-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260504111928.41856-1-socketcan@hartkopp.net
[mkl: use Closes tag instead of Link]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
esd_usb_disconnect() frees each CAN netdev with free_candev() inside
its per-netdev loop and only calls unlink_all_urbs(dev) afterwards.
The per-netdev private data (struct esd_usb_net_priv) is embedded in
the net_device allocation returned by alloc_candev(), so once
free_candev() has run, dev->nets[i] points to freed memory.
unlink_all_urbs() then dereferences the freed dev->nets[i] to kill the
per-netdev TX anchor (usb_kill_anchored_urbs(&priv->tx_submitted)),
clear active_tx_jobs, and reset priv->tx_contexts[].
Reorder the teardown so the anchored URBs are killed before the netdevs
are freed, matching other CAN/USB drivers in the same directory such as
ems_usb, usb_8dev and mcba_usb, which unregister, then unlink, then
free: unregister the netdevs first (which stops their TX queues), call
unlink_all_urbs(dev) once, then free the netdevs.
This issue was found by an in-house static analysis tool.
Fixes: 96d8e90382 ("can: Add driver for esd CAN-USB/2 device")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.5
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260709164159.497640-1-fanwu01@zju.edu.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The Kconfig description of the vxcan kernel module erroneously states the
the vxcan interface does not provide a local echo of sent can frames.
However this behavior changed in commit 259bdba27e ("vxcan: enable local
echo for sent CAN frames") and vxcan interfaces now provide a local echo.
Change the description of the vxcan module in the Kconfig to reflect this
change.
Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260619090035.17769-1-alexander.hoelzl@gmx.net
[mkl: rephrase patch description]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
MGMT_EV_DEVICE_DISCONNECTED carries a reason field which is defined to
be one of MGMT_DEV_DISCONN_* (0x00..0x05). hci_disconn_complete_evt()
converts the HCI error with hci_to_mgmt_reason(), but two other paths
pass the raw HCI error straight through:
hci_cs_disconnect() -> cp->reason
mgmt_connect_failed() -> status
The latter is reached whenever the adapter is powered off or suspended:
hci_disconnect_all_sync() aborts every link with
HCI_ERROR_REMOTE_POWER_OFF, hci_disconnect_sync() deliberately does not
wait for HCI_EV_DISCONN_COMPLETE for that reason, so that
hci_abort_conn_sync() finishes the connection off through
hci_conn_failed() instead.
As a result userspace sees an out of range reason:
@ MGMT Event: Device Disconnected (0x000c) plen 8
BR/EDR Address: 8C:A9:6F:2C:51:46
Reason: Reserved (0x15)
bluetoothd: btd_bearer_disconnected() Unknown disconnection value: 21
bluetoothd: device_disconnected() Unknown disconnection value: 21
Export hci_to_mgmt_reason() and use it in both places, so that a power
off is reported as MGMT_DEV_DISCONN_REMOTE rather than as the raw
HCI_ERROR_REMOTE_POWER_OFF (0x15).
Fixes: d47da6bd4c ("Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED")
Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
qca_controller_memdump() allocates qca->qca_memdump before processing
the first dump packet. For a sequence-zero packet it then disables IBS,
marks memdump collection active, and reads the advertised dump size.
If the controller reports a zero dump size, the error path frees the
local qca_memdump object and returns without clearing qca->qca_memdump
or undoing the collection state. A later memdump work item initializes
its local pointer from qca->qca_memdump and skips allocation when that
pointer is non-NULL, so it can operate on freed memory. The stale
collection and IBS-disabled flags can also leave waiters or later
transmit handling blocked behind an aborted dump.
Clear the saved pointer and memdump state before returning from the
invalid-size path, matching the cleanup used when hci_devcd_init() fails.
A static analysis checker reported the stale memdump state, and manual
source review confirmed the invalid-size failure path.
Fixes: 06d3fdfcdf ("Bluetooth: hci_qca: Add qcom devcoredump support")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn_params_lookup requires hdev->lock be held, otherwise the list
iteration or param access is not safe.
Hold hdev->lock for params lookups in hci_sync.
Fixes: c530569adc ("Bluetooth: hci_core: Introduce HCI_CONN_FLAG_PAST")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dereferencing RCU-protected pointers outside critical sections is
invalid and may lead to UAF. Use of hci_conn in hci_sync callbacks also
needs to hold refcount to avoid UAF.
Take appropriate locks for hci_conn lookups, and take refcount for
hci_conn pointers stored in mgmt_pending_cmd so that the pointer stays
valid.
When accessing conn->state, ensure hdev->lock is held to avoid data
race.
Fixes: 7b445e220d ("Bluetooth: MGMT: Fix holding hci_conn reference while command is queued")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dereferencing RCU-protected pointers outside critical sections is
invalid and may lead to UAF.
Take hdev->lock for hci_conn lookup and hci_abort_conn(). Don't use RCU
to ensure the conn is fully initialized at this point.
Fixes: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Using RCU-protected pointers outside the critical sections without
refcount is incorrect and may result to UAF.
Extend critical section to cover both hci_conn_hash lookup and use of
the returned conn.
Add surrounding rcu_read_lock() also when return value is not used, in
preparation for RCU lockdep requirement to hci_lookup_le_connect().
This avoids concurrent deletion of the conn before we are done
dereferencing it.
Also, make sure to hold hdev->lock when accessing hdev->accept_list.
Fixes: 6d0417e4e1 ("Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch.
Fixes: db33c77ddd ("Bluetooth: btrtl: Create separate module for Realtek BT driver")
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
MGMT_OP_LOAD_CONN_PARAM queues conn_update_sync() when a single parameter
update changes an existing LE central connection. The queued work currently
stores a borrowed hci_conn_params entry from hdev->le_conn_params. A later
LOAD_CONN_PARAM request can clear disabled parameters and free that entry
before hci_cmd_sync_work() runs the queued callback.
Do not keep the borrowed hci_conn_params pointer in queued work. Queue the
hci_conn instead and hold a reference until the queued callback completes.
When the work runs, revalidate that the connection is still present, look
up the current hci_conn_params entry, and cancel the update if userspace
removed that entry while the work was pending.
Copy the interval values from the current params entry under hdev->lock,
then drop the lock and keep using hci_le_conn_update_sync() to issue the
update.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in conn_update_sync+0x2a/0xf0 [bluetooth]
Read of size 1 at addr ffff88810c697126 by task kworker/u17:0/377
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
kasan_report+0xe0/0x110
conn_update_sync+0x2a/0xf0 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Allocated by task 466:
hci_conn_params_add+0xa6/0x240 [bluetooth]
load_conn_param+0x4e1/0x850 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
Freed by task 474:
kfree+0x313/0x590
hci_conn_params_clear_disabled+0x9b/0xc0 [bluetooth]
load_conn_param+0x4bf/0x850 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
Fixes: 0ece498c27 ("Bluetooth: MGMT: Make MGMT_OP_LOAD_CONN_PARAM update existing connection")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the TLV_TYPE_NVM branch of qca_tlv_check_data() the tag loop bound is
"while (idx < length - sizeof(struct tlv_type_nvm))". "length" is a signed
int from the firmware TLV header and sizeof(struct tlv_type_nvm) is a
size_t (12), so "length" is converted to size_t and any firmware-supplied
"length" < 12 makes the subtraction wrap to a huge value. The loop body
then reads a 12-byte struct tlv_type_nvm past the end of the short
vmalloc'd firmware buffer (and the EDL_TAG_ID_* handlers can write past it).
Rewrite the bound as "idx + sizeof(struct tlv_type_nvm) <= length"; both
operands are non-negative, so it no longer underflows and a "length" too
small for one record correctly skips the loop.
BUG: KASAN: vmalloc-out-of-bounds in qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421)
Read of size 2 at addr ffffc900000e5004 by task kworker/u9:0/52
Workqueue: hci0 hci_power_on
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421 drivers/bluetooth/btqca.c:617)
qca_uart_setup (drivers/bluetooth/btqca.c:948)
qca_setup (drivers/bluetooth/hci_qca.c:2029)
hci_uart_setup (drivers/bluetooth/hci_ldisc.c:438)
hci_dev_open_sync (net/bluetooth/hci_sync.c:5227)
hci_power_on (net/bluetooth/hci_core.c:920)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Fixes: 2e4edfa1e2 ("Bluetooth: qca: add missing firmware sanity checks")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reported-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Open vSwitch stores generated flow actions as nlattrs, whose nla_len
field is u16. Commit a1e64addf3 ("net: openvswitch: remove
misbehaving actions length check") allowed the total sw_flow_actions
stream to grow beyond 64 KiB, which is valid, but also removed the last
guard preventing a generated nested action attribute from exceeding
U16_MAX.
An oversized generated container can thus be closed with a truncated
nla_len. A later dump or teardown then walks a structurally different
stream than the one that was validated. In particular, an oversized
nested CLONE/CT action may cause subsequent bytes in the generated
stream to be interpreted as independent actions.
Keep the larger total-action-stream behavior, but make nested action
close reject generated containers that do not fit in nla_len, and return
the error through all callers. For recursive SAMPLE, CLONE, DEC_TTL, and
CHECK_PKT_LEN builders, trim resource-owning action-list tails in reverse
construction order before discarding failed wrappers, so resources copied
into the rejected tails are released before the wrappers are removed.
Most failed outer wrappers are discarded by truncating actions_len after
child resources have been released. CHECK_PKT_LEN also trims its parent
after branch resources are gone. SET/TUNNEL close failures unwind their
known tun_dst ownership directly, and SET_TO_MASKED has no external
ownership and truncates on close failure.
Fixes: a1e64addf3 ("net: openvswitch: remove misbehaving actions length check")
Cc: stable@vger.kernel.org
Assisted-by: avom-custom-harness:gpt-5.5-qwen3.6-mod-mix
Signed-off-by: Asim Viladi Oglu Manizada <manizada@pm.me>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260706094336.38639-1-manizada@pm.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a MACsec interface with IFF_PROMISC set is brought up on top of a
device that has hardware offload enabled, macsec_dev_open() first calls
dev_set_promiscuity(real_dev, 1) and then propagates the open to the
offload device. If that propagation fails, the error path jumps to the
clear_allmulti label, which only reverts allmulti and the unicast
address. The promiscuity taken on the lower device is never dropped, so
real_dev is left permanently stuck in promiscuous mode. Its promiscuity
count can no longer be balanced from software.
Add a clear_promisc label that drops the promiscuity reference and
route the two offload failure paths to it. The dev_set_promiscuity()
failure itself still jumps to clear_allmulti, since on that failure the
count was not incremented.
Fixes: 3cf3227a21 ("net: macsec: hardware offloading infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: James Raphael Tiovalen <jamestiotio@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260705113629.187490-1-jamestiotio@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH7ZpcWbFyOOp6OJbrB3Eaf9PW7cFAmpQtBkACgkQrB3Eaf9P
W7fEwQ//ZGlVHLizm9aK0bcoIGOuUBCASQOmtk19n5vYP97612LbMeaQD9jEBCd2
c/gLK2P9hn9dnH25lvOXPwrWG+gje7lpPypeTjvzvW/andg/2DWGMvmhSv1M8a5q
J6NUKRsCJ2jwwkpILw6ziD+xskEh9t2hxXSc1Xk6K0W5MHJlx07ieoMrL/r/HbvJ
lDiHfg87Hlcp8K6W/aecN8NcliXEuo3KTSYCsBZM48R+Oar3VpqMC2QiLxvYZDqQ
IEVshugVQ8FQCgSp37hDxQLqsGdAfzAcjE8SjAGPJk12IODO8MKLsSsDJWt3MX4a
sjbIiQjEr0nDxtnwtPOBYN5ko5cpeU/A0mvAIHCTcJ36SFucii32i5hBABRV/WKh
gKAppFmXb4TL63heupYff3jlSWRSZKvlXc4R4ybMcIHHXVslK/9DGheEAYvVxTgh
NlV6wmj89cx/Xvzk/ODS4TlsnypIjcE+TINA5lGscRSNwtWYAeqBOxCK8fkSabka
aau0PTkoGaLHQWp2HwjIiJFrat/ZMJfsHWUvISeaKQ5ZJFtq++rE0alkgMpnfVmp
EOtvMdxrxYMPmeDVewH2XQseYWLFgdGzAf3i7MG1dHxEunqaoFCxSqzSnrKuFZLA
tbkHCjm2m2/oW3A0FdqmIIKrMLIDoBYjsEG5PXVYNqOnKpx/PEw=
=k1zg
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-07-10
1) xfrm: propagate -EINPROGRESS from validate_xmit_xfrm()
Return -EINPROGRESS from xfrm_output_one when validate_xmit_xfrm
requeues the packet asynchronously, so the caller doesn't treat it
as a real error and free the skb.
2) xfrm: fix stale skb->prev after async crypto steals a GSO segment
Re-derive skb->prev from the fragment list after async crypto splits
a GSO skb, keeping the linked-list pointers validi.
3) xfrm: nat_keepalive: avoid double free on send error
Hold a state ref while the nat_keepalive timer is active and drop the
timer before freeing the state, preventing a re-entered free on send
error.
4) xfrm: fix sk_dst_cache double-free in xfrm_user_policy()
Null the skb dst cache before freeing the policy so a later skb
destructor doesn't double-free it.
5) xfrm: cache the offload ifindex for netlink dumps
Cache the device ifindex at state-add time and use it for netlink
dumps instead of dereferencing dst->dev, which may have changed by
the time the dump runs.
6) xfrm: reject optional IPTFS templates in outbound policies
Reject outbound policies with an optional IPTFS template,
IPTFS must always be used if configured.
7) xfrm: clear mode callbacks after failed mode setup
Clear the mode->init_flags and init_state callbacks on the error path
after xfrm_init_mode fails, so a partially-initialised mode isn't
reused in xfrm_state_construct.
8) xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags()
Propagate SKBFL_SHARED_FRAG from the original skb to fragments
allocated by iptfs_skb_add_frags, keeping shared-fragment accounting
correct after IPTFS reassembly.
9) xfrm6: clear dst.dev on error to avoid double netdev_put in xfrm6_fill_dst()
Clear dst->dev on the error path of xfrm6_fill_dst() so the caller
doesn't release the netdev reference twice via dst_release.
10) xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
Preallocate all inexact hash bins before existing entries are
reinserted during xfrm_hash_rebuild, so reinsertion always hits an
existing bin.
Please pull or let me know if there are problems.
ipsec-2026-07-10
* tag 'ipsec-2026-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
xfrm6: clear dst.dev on error to avoid double netdev_put in xfrm6_fill_dst()
xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags()
xfrm: clear mode callbacks after failed mode setup
xfrm: reject optional IPTFS templates in outbound policies
xfrm: cache the offload ifindex for netlink dumps
xfrm: fix sk_dst_cache double-free in xfrm_user_policy()
xfrm: nat_keepalive: avoid double free on send error
xfrm: fix stale skb->prev after async crypto steals a GSO segment
xfrm: propagate -EINPROGRESS from validate_xmit_xfrm()
====================
Link: https://patch.msgid.link/20260710090349.343389-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When an ERROR chunk with a STALE_COOKIE cause is received in the
COOKIE_ECHOED state, sctp_sf_do_5_2_6_stale() reads the 4-byte Measure
of Staleness that follows the cause header:
err = (struct sctp_errhdr *)(chunk->skb->data);
stale = ntohl(*(__be32 *)((u8 *)err + sizeof(*err)));
err is the first cause in the chunk, not the STALE_COOKIE cause that
caused the dispatch, and nothing guarantees the staleness field is
present. sctp_walk_errors() only requires a cause to be as long as the
4-byte header, so for a STALE_COOKIE cause of length 4 the read runs
past the cause, and for a minimal ERROR chunk past skb->tail. The value
is echoed to the peer in the Cookie Preservative of the reply INIT,
leaking uninitialized memory.
sctp_sf_cookie_echoed_err() already walks to the STALE_COOKIE cause, so
check its length there and pass it to sctp_sf_do_5_2_6_stale(), which
reads that cause instead of the first one. A STALE_COOKIE cause too
short to hold the staleness field is discarded.
The read is reachable by any peer that can drive an association into
COOKIE_ECHOED, including an unprivileged process using a raw SCTP socket
in a user and network namespace.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Xiang Mei <xmei5@asu.edu>
Assisted-by: Claude:claude-opus-4-8
Cc: stable@vger.kernel.org
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260704033545.2438373-2-bestswngs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
... and must not be subjected to the 'nul terminated' constraint.
If the interface name is 15 characters long, the mask is 16-bytes
'0xff' (to cover for \0) and the valid device name is rejected.
Fixes: 8df772afc9 ("netfilter: x_physdev: reject empty or not-nul terminated device names")
Cc: stable@vger.kernel.org
Closes: https://bugs.launchpad.net/neutron/+bug/2159935
Signed-off-by: Florian Westphal <fw@strlen.de>
Sashiko reports for more incorrect IPv6 transport offsets.
The app code for TCP was assuming IPv4 network header
even after the ipvsh argument was provided. This can
cause problems with apps over IPv6. As for the only
official app in the kernel tree (FTP) this problem is
harmless because we use Netfilter to mangle the FTP
ports and we do not adjust the TCP seq numbers.
Also, provide correct offset of the ICMPV6 header in
ip_vs_out_icmp_v6() for correct checksum checks when
the IPv6 packet has extension headers.
Fixes: d12e12299a ("ipvs: add ipv6 support to ftp")
Fixes: 2a3b791e6e ("IPVS: Add/adjust Netfilter hook functions and helpers for v6")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260706101624.69471-1-zhaoyz24%40mails.tsinghua.edu.cn
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
The layer 2 encapsulation and layer 3 tunnel information in the xmit
path is taken from the other tuple, because the tunnel information that
is included in the tuple for hashtable lookups is also used to perform
the egress encapsulation in the transmit path.
This patch uses the correct direction when setting up the tunnel, the
original proposed patch to address this fix uses the reversed direction.
While at it, remove the redundant check to call dst_release() to drop
the reference on the dst that was obtained from the forward path, which
is not useful in the direct xmit path unless tunneling is performed.
Fixes: fa7395c02d ("netfilter: flowtable: support IPIP tunnel with direct xmit")
Cc: stable@vger.kernel.org
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Add a nft_flowtable.sh regression test for the bridge direct-xmit plus
IPIP/IP6IP6 underlay configuration that reproduces the reachable
DIRECT+tunnel tuple combination exercised by the flowtable fix.
The test reuses the existing bridge and tunnel topology, installs flow
rules for the tunnel egress and bridge reply path, verifies IPv4 and
IPv6 forwarding, and checks the flowtable counters after the transfer.
Signed-off-by: Zhengyang Chen <chzhengyang2023@lzu.edu.cn>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
The "already exists" dedup logic in __nf_conncount_add() decides
whether a connection has already been counted and can be skipped instead
of incrementing the connlimit count. It compares the conntrack zone of a
list entry with the zone of the connection being added using
nf_ct_zone_id() and nf_ct_zone_equal(), passing conn->zone.dir or
zone->dir as the direction argument.
Those helpers take enum ip_conntrack_dir values: IP_CT_DIR_ORIGINAL is 0
and IP_CT_DIR_REPLY is 1. However, zone->dir is a u8 bitmask:
NF_CT_ZONE_DIR_ORIG is 1, NF_CT_ZONE_DIR_REPL is 2 and
NF_CT_DEFAULT_ZONE_DIR is 3. Passing that bitmask as the enum direction
shifts the meaning of every non-zero value. An ORIG-only zone passes 1
and is tested as REPLY, while REPL-only and default zones pass 2 or 3 and
test bits beyond the valid direction range. In those cases
nf_ct_zone_id() can fall back to NF_CT_DEFAULT_ZONE_ID instead of using
the real zone id, so different zones can be treated as equal and dedup
collapses to tuple equality alone.
nf_conncount stores and compares the original-direction tuple for a
connection. If an skb already has an attached conntrack entry,
get_ct_or_tuple_from_skb() explicitly copies
ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, regardless of the packet's
ctinfo. Therefore the zone comparison in the tuple dedup path must use
IP_CT_DIR_ORIGINAL as well; the zone direction bitmask describes where a
zone id applies, not which direction this conncount tuple represents.
Fix the two dedup comparisons by passing IP_CT_DIR_ORIGINAL directly.
Do not special-case NF_CT_DEFAULT_ZONE_DIR and do not compare raw zone
ids: using the existing helpers with IP_CT_DIR_ORIGINAL preserves the
direction-aware NF_CT_DEFAULT_ZONE_ID fallback. A default bidirectional
zone contains the ORIG bit, so it naturally returns the real zone id;
reply-only zones continue to fall back for original-direction tuple
comparisons.
Fixes: 21ba8847f8 ("netfilter: nf_conncount: Fix garbage collection with zones")
Fixes: b36e4523d4 ("netfilter: nf_conncount: fix garbage collection confirm race")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: Claude-Code:GLM-5.2
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
br_ip6_fragment() gets prevhdr, a pointer into the skb head, from
ip6_find_1stfragopt(), then calls skb_checksum_help(). For a cloned skb
skb_checksum_help() reallocates the head via pskb_expand_head(), leaving
prevhdr dangling. It is later dereferenced in ip6_frag_next(), causing a
use-after-free write.
Save prevhdr's offset before skb_checksum_help() and recompute it after,
like commit ef0efcd3bd ("ipv6: Fix dangling pointer when ipv6
fragment").
BUG: KASAN: slab-use-after-free in ip6_frag_next (net/ipv6/ip6_output.c:857)
Write of size 1 at addr ffff888013ff5016 by task exploit/141
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ip6_frag_next (net/ipv6/ip6_output.c:857)
br_ip6_fragment (net/ipv6/netfilter.c:212)
nf_ct_bridge_post (net/bridge/netfilter/nf_conntrack_bridge.c:407)
nf_hook_slow (net/netfilter/core.c:619)
br_forward_finish (net/bridge/br_forward.c:66)
__br_forward (net/bridge/br_forward.c:115)
maybe_deliver (net/bridge/br_forward.c:191)
br_flood (net/bridge/br_forward.c:245)
br_handle_frame_finish (net/bridge/br_input.c:229)
br_handle_frame (net/bridge/br_input.c:442)
...
packet_sendmsg (net/packet/af_packet.c:3114)
...
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception in interrupt
Fixes: 764dd163ac ("netfilter: nf_conntrack_bridge: add support for IPv6")
Cc: stable@vger.kernel.org
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Signed-off-by: Florian Westphal <fw@strlen.de>
ecache_work_evict_list() redelivers DESTROY events for conntracks that
were moved to the per-netns dying_list after event delivery failed. It
sets a 10ms deadline:
stop = jiffies + ECACHE_MAX_JIFFIES
but then tests:
time_after(stop, jiffies)
This condition is true while the deadline is still in the future, so the
worker returns STATE_RESTART after the first successful redelivery in the
usual case. ecache_work() maps STATE_RESTART to delay 0, which turns the
redelivery path into one dying conntrack per workqueue dispatch and makes
the sent > 16 batching/cond_resched() path effectively unreachable.
A conntrack netlink listener whose receive queue is congested can make
DESTROY event delivery fail with -ENOBUFS. With sustained conntrack
churn, entries then accumulate on the dying_list and are only drained at
the degraded one-entry-per-dispatch rate once delivery succeeds again,
wasting CPU on back-to-back workqueue reschedules and prolonging
conntrack memory/resource pressure.
In a KASAN QEMU test with CONFIG_NF_CONNTRACK_EVENTS=y and
nf_conntrack.enable_hooks=1, a congested DESTROY listener caused 8192
nf_ct_delete() calls to return false and move entries to the dying_list.
After closing the listener, the unfixed kernel needed 7670 ecache_work()
entries to destroy 7669 conntracks. With this change, the same 8192
entries were destroyed by 2 ecache_work() entries.
Swap the comparison so the worker restarts only after the deadline has
expired.
Fixes: 2ed3bf188b ("netfilter: ecache: use dedicated list for event redelivery")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: Claude-Code:GLM-5.2
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
xt_nat SNAT and DNAT target handlers assume IP-family conntrack state
is present and can dereference a NULL pointer when instantiated from an
unsupported family through nft_compat. A bridge-family compat rule can
therefore trigger a NULL-dereference in nf_nat_setup_info().
Reject non-IP families in xt_nat_checkentry() so unsupported targets
cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT
compat users and leave the runtime fast path unchanged.
[ The crash was fixed via
9dbba7e694 ("netfilter: nft_compat: ebtables emulation must reject non-bridge targets"),
so this patch is no longer critical.
Nevertheless, NAT is only relevant for ipv4/ipv6, so this extra
family check is a good idea in any case. ]
Fixes: c7232c9979 ("netfilter: add protocol independent NAT core")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
