sync_linked_regs() is called after a conditional jump to propagate new
bounds of a register to all its liked registers. But the verifier log
only prints the state of the register that is part of the conditional
jump.
Make sync_linked_regs() scratch the registers whose bounds have been
updated by propagation from a known register.
Before:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (35) if r0 >= 0x6 goto pc+1
After:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+2 ; R0=scalar(id=1+0,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (35) if r0 >= 0x6 goto pc+1
The conditional jump in 4 updates the bound of R1 and the new bounds are
propogated to R0 as it is linked with the same id, before this change,
verifier only printed the state for R1 but after it prints for both R0
and R1.
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20260116141436.3715322-1-puranjay@kernel.org
On my arm64 machine, I get the following failure:
...
tester_init:PASS:tester_log_buf 0 nsec
process_subtest:PASS:obj_open_mem 0 nsec
process_subtest:PASS:specs_alloc 0 nsec
serial_test_map_kptr:PASS:rcu_tasks_trace_gp__open_and_load 0 nsec
...
test_map_kptr_success:PASS:map_kptr__open_and_load 0 nsec
test_map_kptr_success:PASS:test_map_kptr_ref1 refcount 0 nsec
test_map_kptr_success:FAIL:test_map_kptr_ref1 retval unexpected error: 2 (errno 2)
test_map_kptr_success:PASS:test_map_kptr_ref2 refcount 0 nsec
test_map_kptr_success:FAIL:test_map_kptr_ref2 retval unexpected error: 1 (errno 2)
...
#201/21 map_kptr/success-map:FAIL
In serial_test_map_kptr(), before test_map_kptr_success(), one
kern_sync_rcu() is used to have some delay for freeing the map.
But in my environment, one kern_sync_rcu() seems not enough and
caused the test failure.
In bpf_map_free_in_work() in syscall.c, the queue time for
queue_work(system_dfl_wq, &map->work)
may be longer than expected. This may cause the test failure
since test_map_kptr_success() expects all previous maps having been freed.
Since it is not clear how long queue_work() time takes, a bpf prog
is added to count the reference after bpf_kfunc_call_test_acquire().
If the number of references is 2 (for initial ref and the one just
acquired), all previous maps should have been released. This will
resolve the above 'retval unexpected error' issue.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260116052245.3692405-1-yonghong.song@linux.dev
If CONFIG_VXLAN is 'm', struct vxlanhdr will not be in vmlinux.h.
Add a ___local variant to support cases where vxlan is a module.
Fixes: 8517b1abe5 ("selftests/bpf: Integrate test_tc_tunnel.sh tests into test_progs")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260115163457.146267-1-alan.maguire@oracle.com
Add support for the 'prepend' option when attaching tcx_ingress and
tcx_egress programs. This option allows inserting a BPF program at
the beginning of the TCX chain instead of appending it at the end.
The implementation uses BPF_F_BEFORE flag which automatically inserts
the program at the beginning of the chain when no relative reference
is specified.
This change includes:
- Modify do_attach_tcx() to support prepend insertion using BPF_F_BEFORE
- Update documentation to describe the new 'prepend' option
- Add bash completion support for the 'prepend' option on tcx attach types
- Add example usage in the documentation
- Add validation to reject 'overwrite' for non-XDP attach types
The 'prepend' option is only valid for tcx_ingress and tcx_egress attach
types. For XDP attach types, the existing 'overwrite' option remains
available.
Example usage:
# bpftool net attach tcx_ingress name tc_prog dev lo prepend
This feature is useful when the order of program execution in the TCX
chain matters and users need to ensure certain programs run first.
Co-developed-by: Siwan Kim <siwan.kim@navercorp.com>
Signed-off-by: Siwan Kim <siwan.kim@navercorp.com>
Signed-off-by: Gyutae Bae <gyutae.bae@navercorp.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260112034516.22723-1-gyutae.opensource@navercorp.com
Add GPL-2.0 SPDX-License-Identifier lines to some files,
and remove a reference to COPYING, and boilerplate warranty
text, from offload.c.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260115013129.598705-1-tim.bird@sony.com
Add __force annotations to casts that convert between __user and kernel
address spaces. These casts are intentional:
- In bpf_send_signal_common(), the value is stored in si_value.sival_ptr
which is typed as void __user *, but the value comes from a BPF
program parameter.
- In the bpf_*_dynptr() kfuncs, user pointers are cast to const void *
before being passed to copy helper functions that correctly handle
the user address space through copy_from_user variants.
Without __force, sparse reports:
warning: cast removes address space '__user' of expression
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260115184509.3585759-1-mykyta.yatsenko5@gmail.com
Closes: https://lore.kernel.org/oe-kbuild-all/202601131740.6C3BdBaB-lkp@intel.com/
Puranjay Mohan says:
====================
bpf: Fix linked register tracking
This patch fixes the linked register tracking when multiple links from
the same register are created with a sync between the creation of these
links. The sync corrupts the id of the register and therefore the second
link is not created properly. See the patch description to understand
more.
The fix is to preserve the id while doing the sync similar to the off.
====================
Link: https://patch.msgid.link/20260115151143.1344724-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Before the last commit, sync_linked_regs() corrupted the register whose
bounds are being updated by copying known_reg's id to it. The ids are
the same in value but known_reg has the BPF_ADD_CONST flag which is
wrongly copied to reg.
This later causes issues when creating new links to this reg.
assign_scalar_id_before_mov() sees this BPF_ADD_CONST and gives a new id
to this register and breaks the old links. This is exposed by the added
selftest.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260115151143.1344724-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sync_linked_regs() copies the id of known_reg to reg when propagating
bounds of known_reg to reg using the off of known_reg, but when
known_reg was linked to reg like:
known_reg = reg ; both known_reg and reg get same id
known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST
now when a call to sync_linked_regs() happens, let's say with the following:
if known_reg >= 10 goto pc+2
known_reg's new bounds are propagated to reg but now reg gets
BPF_ADD_CONST from the copy.
This means if another link to reg is created like:
another_reg = reg ; another_reg should get the id of reg but
assign_scalar_id_before_mov() sees
BPF_ADD_CONST on reg and assigns a new id to it.
As reg has a new id now, known_reg's link to reg is broken. If we find
new bounds for known_reg, they will not be propagated to reg.
This can be seen in the selftest added in the next commit:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255)
6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf))
8: (37) r0 /= 0
div by zero
When 4 is verified, r1's bounds are propagated to r0 but r0 also gets
BPF_ADD_CONST (bug).
When 5 is verified, r0 gets a new id (2) and its link with r1 is broken.
After 6 we know r1 has bounds [14, 259] and therefore r0 should have
bounds [10, 255], therefore the branch at 7 is always taken. But because
r0's id was changed to 2, r1's new bounds are not propagated to r0.
The verifier still thinks r0 has bounds [6, 255] before 7 and execution
can reach div by zero.
Fix this by preserving id in sync_linked_regs() like off and subreg_def.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260115151143.1344724-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We do not actually test the bpf_override_return helper functionality
itself at the moment, only the bpf program being able to attach it.
Adding test that override prctl syscall return value on top of
kprobe and kprobe.multi.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20260112121157.854473-2-jolsa@kernel.org
Mahe reported issue with bpf_override_return helper not working when
executed from kprobe.multi bpf program on arm.
The problem is that on arm we use alternate storage for pt_regs object
that is passed to bpf_prog_run and if any register is changed (which
is the case of bpf_override_return) it's not propagated back to actual
pt_regs object.
Fixing this by introducing and calling ftrace_partial_regs_update function
to propagate the values of changed registers (ip and stack).
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/bpf/20260112121157.854473-1-jolsa@kernel.org
Anton Protopopov says:
====================
bpf: Live registers computation with gotox
While adding a selftest for live registers computation with gotox,
I've noticed that the code is actually incomplete. Namely, the
destination register rX in `gotox rX` wasn't actually considered
as used. Fix this and add a selftest.
v1 -> v2:
* only enable the new selftest on x86 and arm64
v1: https://lore.kernel.org/bpf/20260114113314.32649-1-a.s.protopopov@gmail.com/T/#t
====================
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260114162544.83253-1-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test which checks that the destination register of a gotox
instruction is marked as used and that the union of jump targets
is considered as live.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260114162544.83253-3-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For a `gotox rX` instruction the rX register should be marked as used
in the compute_insn_live_regs() function. Fix this.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260114162544.83253-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/sched/ext.c
Auto-merging mm/memcontrol.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The ldimm64 instruction for map value supports an offset.
For insn array maps it wasn't tested before, as normally
such instructions aren't generated. However, this is still
possible to pass such instructions, so add a few tests to
check that correct offsets work properly and incorrect
offsets are rejected.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260111153047.8388-4-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The insn_array_map_direct_value_addr() function currently returns
-EINVAL when the offset within the map is invalid. Change this to
return -EACCES, so that it is consistent with similar boundary access
checks in the verifier.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260111153047.8388-3-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The map_direct_value_addr() function of the instruction
array map incorrectly adds offset to the resulting address.
This is a bug, because later the resolve_pseudo_ldimm64()
function adds the offset. Fix it. Corresponding selftests
are added in a consequent commit.
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260111153047.8388-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF verifier was recently updated to treat pointers to struct types
returned from BPF kfuncs as implicitly trusted by default. Add a new
test case to exercise this new implicit trust semantic.
The KF_ACQUIRE flag was dropped from the bpf_get_root_mem_cgroup()
kfunc because it returns a global pointer to root_mem_cgroup without
performing any explicit reference counting. This makes it an ideal
candidate to verify the new implicit trusted pointer semantics.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260113083949.2502978-3-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With the BPF verifier now treating pointers to struct types returned
from BPF kfuncs as implicitly trusted by default, there is no need for
bpf_get_root_mem_cgroup() to be annotated with the KF_ACQUIRE flag.
bpf_get_root_mem_cgroup() does not acquire any references, but rather
simply returns a NULL pointer or a pointer to a struct mem_cgroup
object that is valid for the entire lifetime of the kernel.
This simplifies BPF programs using this kfunc by removing the
requirement to pair the call with bpf_put_mem_cgroup().
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260113083949.2502978-2-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Teach the BPF verifier to treat pointers to struct types returned from
BPF kfuncs as implicitly trusted (PTR_TO_BTF_ID | PTR_TRUSTED) by
default. Returning untrusted pointers to struct types from BPF kfuncs
should be considered an exception only, and certainly not the norm.
Update existing selftests to reflect the change in register type
printing (e.g. `ptr_` becoming `trusted_ptr_` in verifier error
messages).
Link: https://lore.kernel.org/bpf/aV4nbCaMfIoM0awM@google.com/
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260113083949.2502978-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Donglin Peng says:
====================
Improve the performance of BTF type lookups with binary search
From: Donglin Peng <pengdonglin@xiaomi.com>
The series addresses the performance limitations of linear search in large
BTFs by:
1. Adding BTF permutation support
2. Using resolve_btfids to sort BTF during the build phase
3. Checking BTF sorting
4. Using binary search when looking up types
Patch #1 introduces an interface for btf__permute in libbpf to relay out BTF.
Patch #2 adds test cases to validate the functionality of btf__permute in base
and split BTF scenarios.
Patch #3 introduces a new phase in the resolve_btfids tool to sort BTF by name
in ascending order.
Patches #4-#7 implement the sorting check and binary search.
Patches #8-#10 optimize type lookup performance of some functions by skipping
anonymous types or invoking btf_find_by_name_kind.
Patch #11 refactors the code by calling str_is_empty.
Here is a simple performance test result [1] for lookups to find 87,584 named
types in vmlinux BTF:
./vmtest.sh -- ./test_progs -t btf_permute/perf -v
Results:
| Condition | Lookup Time | Improvement |
|--------------------|-------------|--------------|
| Unsorted (Linear) | 36,534 ms | Baseline |
| Sorted (Binary) | 15 ms | 2437x faster |
The binary search implementation reduces lookup time from 36.5 seconds to 15
milliseconds, achieving a **2437x** speedup for large-scale type queries.
Changelog:
v12:
- Set the start_id to 1 instead of btf->start_id in the btf__find_by_name (AI)
v11:
- Link: https://lore.kernel.org/bpf/20260108031645.1350069-1-dolinux.peng@gmail.com/
- PATCH #1: Modify implementation of btf__permute: id_map[0] must be 0 for base BTF (Andrii)
- PATCH #3: Refactor the code (Andrii)
- PATCH #4~8:
- Revert to using the binary search in v7 to simplify the code (Andrii)
- Refactor the code of btf_check_sorted (Andrii, Eduard)
- Rename sorted_start_id to named_start_id
- Rename btf_sorted_start_id to btf_named_start_id, and add comments (Andrii, Eduard)
v10:
- Link: https://lore.kernel.org/all/20251218113051.455293-1-dolinux.peng@gmail.com/
- Improve btf__permute() documentation (Eduard)
- Fall back to linear search when locating anonymous types (Eduard)
- Remove redundant NULL name check in libbpf's linear search path (Eduard)
- Simplify btf_check_sorted() implementation (Eduard)
- Treat kernel modules as unsorted by default
- Introduce btf_is_sorted and btf_sorted_start_id for clarity (Eduard)
- Fix optimizations in btf_find_decl_tag_value() and btf_prepare_func_args()
to support split BTF
- Remove linear search branch in determine_ptr_size()
- Rebase onto Ihor's v4 patch series [4]
v9:
- Link: https://lore.kernel.org/bpf/20251208062353.1702672-1-dolinux.peng@gmail.com/
- Optimize the performance of the function determine_ptr_size by invoking
btf__find_by_name_kind
- Optimize the performance of btf_find_decl_tag_value/btf_prepare_func_args/
bpf_core_add_cands by skipping anonymous types
- Rebase the patch series onto Ihor's v3 patch series [3]
v8
- Link: https://lore.kernel.org/bpf/20251126085025.784288-1-dolinux.peng@gmail.com/
- Remove the type dropping feature of btf__permute (Andrii)
- Refactor the code of btf__permute (Andrii, Eduard)
- Make the self-test code cleaner (Eduard)
- Reconstruct the BTF sorting patch based on Ihor's patch series [2]
- Simplify the sorting logic and place anonymous types before named types
(Andrii, Eduard)
- Optimize type lookup performance of two kernel functions
- Refactoring the binary search and type lookup logic achieves a 4.2%
performance gain, reducing the average lookup time (via the perf test
code in [1] for 60,995 named types in vmlinux BTF) from 10,217 us (v7) to
9,783 us (v8).
v7:
- Link: https://lore.kernel.org/all/20251119031531.1817099-1-dolinux.peng@gmail.com/
- btf__permute API refinement: Adjusted id_map and id_map_cnt parameter
usage so that for base BTF, id_map[0] now contains the new id of original
type id 1 (instead of VOID type id 0), improving logical consistency
- Selftest updates: Modified test cases to align with the API usage changes
- Refactor the code of resolve_btfids
v6:
- Link: https://lore.kernel.org/all/20251117132623.3807094-1-dolinux.peng@gmail.com/
- ID Map-based reimplementation of btf__permute (Andrii)
- Build-time BTF sorting using resolve_btfids (Alexei, Eduard)
- Binary search method refactoring (Andrii)
- Enhanced selftest coverage
v5:
- Link: https://lore.kernel.org/all/20251106131956.1222864-1-dolinux.peng@gmail.com/
- Refactor binary search implementation for improved efficiency
(Thanks to Andrii and Eduard)
- Extend btf__permute interface with 'ids_sz' parameter to support
type dropping feature (suggested by Andrii). Plan subsequent reimplementation of
id_map version for comparative analysis with current sequence interface
- Add comprehensive test coverage for type dropping functionality
- Enhance function comment clarity and accuracy
v4:
- Link: https://lore.kernel.org/all/20251104134033.344807-1-dolinux.peng@gmail.com/
- Abstracted btf_dedup_remap_types logic into a helper function (suggested by Eduard).
- Removed btf_sort.c and implemented sorting separately for libbpf and kernel (suggested by Andrii).
- Added test cases for both base BTF and split BTF scenarios (suggested by Eduard).
- Added validation for name-only sorting of types (suggested by Andrii)
- Refactored btf__permute implementation to reduce complexity (suggested by Andrii)
- Add doc comments for btf__permute (suggested by Andrii)
v3:
- Link: https://lore.kernel.org/all/20251027135423.3098490-1-dolinux.peng@gmail.com/
- Remove sorting logic from libbpf and provide a generic btf__permute() interface (suggested
by Andrii)
- Omitted the search direction patch to avoid conflicts with base BTF (suggested by Eduard).
- Include btf_sort.c directly in btf.c to reduce function call overhead
v2:
- Link: https://lore.kernel.org/all/20251020093941.548058-1-dolinux.peng@gmail.com/
- Moved sorting to the build phase to reduce overhead (suggested by Alexei).
- Integrated sorting into btf_dedup_compact_and_sort_types (suggested by Eduard).
- Added sorting checks during BTF parsing.
- Consolidated common logic into btf_sort.c for sharing (suggested by Alan).
v1:
- Link: https://lore.kernel.org/all/20251013131537.1927035-1-dolinux.peng@gmail.com/
[1] https://github.com/pengdonglin137/btf_sort_test
[2] https://lore.kernel.org/bpf/20251126012656.3546071-1-ihor.solodrai@linux.dev/
[3] https://lore.kernel.org/bpf/20251205223046.4155870-1-ihor.solodrai@linux.dev/
[4] https://lore.kernel.org/bpf/20251218003314.260269-1-ihor.solodrai@linux.dev/
====================
Link: https://patch.msgid.link/20260109130003.3313716-1-dolinux.peng@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Calling the str_is_empty function to clarify the code and
no functional changes are introduced.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-12-dolinux.peng@gmail.com
Currently, vmlinux BTF is unconditionally sorted during
the build phase. The function btf_find_by_name_kind
executes the binary search branch, so find_bpffs_btf_enums
can be optimized by using btf_find_by_name_kind.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-10-dolinux.peng@gmail.com
Currently, vmlinux and kernel module BTFs are unconditionally
sorted during the build phase, with named types placed at the
end. Thus, anonymous types should be skipped when starting the
search. In my vmlinux BTF, the number of anonymous types is
61,747, which means the loop count can be reduced by 61,747.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-9-dolinux.peng@gmail.com
This patch checks whether the BTF is sorted by name in ascending order.
If sorted, binary search will be used when looking up types.
Specifically, vmlinux and kernel module BTFs are always sorted during
the build phase with anonymous types placed before named types, so we
only need to identify the starting ID of named types.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-8-dolinux.peng@gmail.com
Improve btf_find_by_name_kind() performance by adding binary search
support for sorted types. Falls back to linear search for compatibility.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-7-dolinux.peng@gmail.com
This patch checks whether the BTF is sorted by name in ascending
order. If sorted, binary search will be used when looking up types.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-6-dolinux.peng@gmail.com
This patch introduces binary search optimization for BTF type lookups
when the BTF instance contains sorted types.
The optimization significantly improves performance when searching for
types in large BTF instances with sorted types. For unsorted BTF, the
implementation falls back to the original linear search.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-5-dolinux.peng@gmail.com
This introduces a new BTF sorting phase that specifically sorts
BTF types by name in ascending order, so that the binary search
can be used to look up types.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-4-dolinux.peng@gmail.com
This patch introduces test cases for the btf__permute function to ensure
it works correctly with both base BTF and split BTF scenarios.
The test suite includes:
- test_permute_base: Validates permutation on base BTF
- test_permute_split: Tests permutation on split BTF
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-3-dolinux.peng@gmail.com
Introduce btf__permute() API to allow in-place rearrangement of BTF types.
This function reorganizes BTF type order according to a provided array of
type IDs, updating all type references to maintain consistency.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-2-dolinux.peng@gmail.com
- Revert bad commit "gfs2: Fix use of bio_chain"
-----BEGIN PGP SIGNATURE-----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=1cPr
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 revert from Andreas Gruenbacher:
"Revert bad commit "gfs2: Fix use of bio_chain"
I was originally assuming that there must be a bug in gfs2
because gfs2 chains bios in the opposite direction of what
bio_chain_and_submit() expects.
It turns out that the bio chains are set up in "reverse direction"
intentionally so that the first bio's bi_end_io callback is invoked
rather than the last bio's callback.
We want the first bio's callback invoked for the following reason: The
initial bio starts page aligned and covers one or more pages. When it
terminates at a non-page-aligned offset, subsequent bios are added to
handle the remaining portion of the final page.
Upon completion of the bio chain, all affected pages need to be be
marked as read, and only the first bio references all of these pages"
* tag 'gfs2-for-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: Fix use of bio_chain"
- Avoid freeing stack-allocated node in kvm_async_pf_queue_task
- Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmlh7zYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM6bQgArr0BI1b34xyPmsGk3J0+mUBSeYwp
0aVkegq4BLTDNDY7/yz7jXf9wL0x8uLps/+PJjR3QKpjAAMCwwWi5iQrwoVLsOjO
N9S15Np4Be1fKvpHoB+8z7/uGFhHr9ltpO5wsDOdR2/lpEnZlTZZtD2Wl093DsKV
xoCbddcfgRmx78NV15GnXSTFeTPodHSLQL+96oVN4XZRZVLefYsISnZa66VA5B/2
pl9SndD/zMMo8j6YrrImtuQL6Km+DlqNqNddAXgvQ6JIJ3rO/WgLyxJPaV8trC4Q
n6x8hQcFCRqM+Oi9G0+b4LgfQUPg/0hxPSIZi8yeZAZpJhMb7iEetLXc6A==
=Kew3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull x86 kvm fixes from Paolo Bonzini:
- Avoid freeing stack-allocated node in kvm_async_pf_queue_task
- Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Verify TILELOADD actually #NM faults when XFD[18]=1
selftests: kvm: try getting XFD and XSAVE state out of sync
selftests: kvm: replace numbered sync points with actions
x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1
x86/kvm: Avoid freeing stack-allocated node in kvm_async_pf_queue_task
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmll5noTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXjmoB/0f4VwGDh4rXI+eEDveucx/sPxJviBt
+hLdnNPZfSmi793BGCgLuUC1njModcR8bz8cza9zVo0aLWbcV8occCoE62228k/a
OrwzLDaHkWrMAq/y54kiiv0AB0edOn0IjkYcTwaF/DfIeYsGvtJDw8oYCFQQllH+
xEO/jWMhZXPGpWsKNm1SU0c0Y1nqAVnJ+3j8zQyyGk4WzOCuwsMn+pAR4/F+hmin
kutzij5IwjUqmcb1jwZR3U7GBWPfnURBRFEfDyg093Dw4kaVmXhCENthKSuq5bTw
ndklc4ze51Lzsvk/yIe6cW3b+LCn5/9+OkEVK/nrVh34UFLiCwE6GBDp
=IKNx
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20260112' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Minor fixes and cleanups for the MSHV driver
* tag 'hyperv-fixes-signed-20260112' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: release mutex on region invalidation failure
hyperv: Avoid -Wflex-array-member-not-at-end warning
mshv: hide x86-specific functions on arm64
mshv: Initialize local variables early upon region invalidation
mshv: Use PMD_ORDER instead of HPAGE_PMD_ORDER when processing regions
cilium bpf_wiregard.bpf.c when compiled with -O1 fails to load
with the following verifier log:
192: (79) r2 = *(u64 *)(r10 -304) ; R2=pkt(r=40) R10=fp0 fp-304=pkt(r=40)
...
227: (85) call bpf_skb_store_bytes#9 ; R0=scalar()
228: (bc) w2 = w0 ; R0=scalar() R2=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
229: (c4) w2 s>>= 31 ; R2=scalar(smin=0,smax=umax=0xffffffff,smin32=-1,smax32=0,var_off=(0x0; 0xffffffff))
230: (54) w2 &= -134 ; R2=scalar(smin=0,smax=umax=umax32=0xffffff7a,smax32=0x7fffff7a,var_off=(0x0; 0xffffff7a))
...
232: (66) if w2 s> 0xffffffff goto pc+125 ; R2=scalar(smin=umin=umin32=0x80000000,smax=umax=umax32=0xffffff7a,smax32=-134,var_off=(0x80000000; 0x7fffff7a))
...
238: (79) r4 = *(u64 *)(r10 -304) ; R4=scalar() R10=fp0 fp-304=scalar()
239: (56) if w2 != 0xffffff78 goto pc+210 ; R2=0xffffff78 // -136
...
258: (71) r1 = *(u8 *)(r4 +0)
R4 invalid mem access 'scalar'
The error might confuse most bpf authors, since fp-304 slot had 'pkt'
pointer at insn 192 and became 'scalar' at 238. That happened because
bpf_skb_store_bytes() clears all packet pointers including those in
the stack. On the first glance it might look like a bug in the source
code, since ctx->data pointer should have been reloaded after the call
to bpf_skb_store_bytes().
The relevant part of cilium source code looks like this:
// bpf/lib/nodeport.h
int dsr_set_ipip6()
{
if (ctx_adjust_hroom(...))
return DROP_INVALID; // -134
if (ctx_store_bytes(...))
return DROP_WRITE_ERROR; // -141
return 0;
}
bool dsr_fail_needs_reply(int code)
{
if (code == DROP_FRAG_NEEDED) // -136
return true;
return false;
}
tail_nodeport_ipv6_dsr()
{
ret = dsr_set_ipip6(...);
if (!IS_ERR(ret)) {
...
} else {
if (dsr_fail_needs_reply(ret))
return dsr_reply_icmp6(...);
}
}
The code doesn't have arithmetic shift by 31 and it reloads ctx->data
every time it needs to access it. So it's not a bug in the source code.
The reason is DAGCombiner::foldSelectCCToShiftAnd() LLVM transformation:
// If this is a select where the false operand is zero and the compare is a
// check of the sign bit, see if we can perform the "gzip trick":
// select_cc setlt X, 0, A, 0 -> and (sra X, size(X)-1), A
// select_cc setgt X, 0, A, 0 -> and (not (sra X, size(X)-1)), A
The conditional branch in dsr_set_ipip6() and its return values
are optimized into BPF_ARSH plus BPF_AND:
227: (85) call bpf_skb_store_bytes#9
228: (bc) w2 = w0
229: (c4) w2 s>>= 31 ; R2=scalar(smin=0,smax=umax=0xffffffff,smin32=-1,smax32=0,var_off=(0x0; 0xffffffff))
230: (54) w2 &= -134 ; R2=scalar(smin=0,smax=umax=umax32=0xffffff7a,smax32=0x7fffff7a,var_off=(0x0; 0xffffff7a))
after insn 230 the register w2 can only be 0 or -134,
but the verifier approximates it, since there is no way to
represent two scalars in bpf_reg_state.
After fallthough at insn 232 the w2 can only be -134,
hence the branch at insn
239: (56) if w2 != -136 goto pc+210
should be always taken, and trapping insn 258 should never execute.
LLVM generated correct code, but the verifier follows impossible
path and rejects valid program. To fix this issue recognize this
special LLVM optimization and fork the verifier state.
So after insn 229: (c4) w2 s>>= 31
the verifier has two states to explore:
one with w2 = 0 and another with w2 = 0xffffffff
which makes the verifier accept bpf_wiregard.c
A similar pattern exists were OR operation is used in place of the AND
operation, the verifier detects that pattern as well by forking the
state before the OR operation with a scalar in range [-1,0].
Note there are 20+ such patterns in bpf_wiregard.o compiled
with -O1 and -O2, but they're rarely seen in other production
bpf programs, so push_stack() approach is not a concern.
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260112201424.816836-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song says:
====================
Fix a few selftest failure due to 64K page
Fix a few arm64 selftest failures due to 64K page. Please see each
indvidual patch for why the test failed and how the test gets fixed.
====================
Link: https://patch.msgid.link/20260113061018.3797051-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With 64K page on arm64, verifier_arena_globals1 failed like below:
...
libbpf: map 'arena': failed to create: -E2BIG
...
#509/1 verifier_arena_globals1/check_reserve1:FAIL
...
For 64K page, if the number of arena pages is (1UL << 20), the total
memory will exceed 4G and this will cause map creation failure.
Adjusting ARENA_PAGES based on the actual page size fixed the problem.
Cc: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260113061033.3798549-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current selftest sk_bypass_prot_mem only supports 4K page.
When running with 64K page on arm64, the following failure happens:
...
check_bypass:FAIL:no bypass unexpected no bypass: actual 3 <= expected 32
...
#385/1 sk_bypass_prot_mem/TCP :FAIL
...
check_bypass:FAIL:no bypass unexpected no bypass: actual 4 <= expected 32
...
#385/2 sk_bypass_prot_mem/UDP :FAIL
...
Adding support to 64K page as well fixed the failure.
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260113061028.3798326-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On arm64 with 64K page , I observed the following test failure:
...
subtest_dmabuf_iter_check_lots_of_buffers:FAIL:total_bytes_read unexpected total_bytes_read:
actual 4696 <= expected 65536
#97/3 dmabuf_iter/lots_of_buffers:FAIL
With 4K page on x86, the total_bytes_read is 4593.
With 64K page on arm64, the total_byte_read is 4696.
In progs/dmabuf_iter.c, for each iteration, the output is
BPF_SEQ_PRINTF(seq, "%lu\n%llu\n%s\n%s\n", inode, size, name, exporter);
The only difference between 4K and 64K page is 'size' in
the above BPF_SEQ_PRINTF. The 4K page will output '4096' and
the 64K page will output '65536'. So the total_bytes_read with 64K page
is slighter greater than 4K page.
Adjusting the total_bytes_read from 65536 to 4096 fixed the issue.
Cc: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260113061023.3798085-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace the pattern of declaring a local regs array from cur_regs()
and then indexing into it with the more concise reg_state() helper.
This simplifies the code by eliminating intermediate variables and
makes register access more consistent throughout the verifier.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20260113134826.2214860-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sami Tolvanen says:
====================
While running BPF self-tests with CONFIG_CFI (Control Flow
Integrity) enabled, I ran into a couple of failures in
bpf_obj_free_fields() caused by type mismatches between the
btf_dtor_kfunc_t function pointer type and the registered
destructor functions.
It looks like we can't change the argument type for these
functions to match btf_dtor_kfunc_t because the verifier doesn't
like void pointer arguments for functions used in BPF programs,
so this series fixes the issue by adding stubs with correct types
to use as destructors for each instance of this I found in the
kernel tree.
The last patch changes btf_check_dtor_kfuncs() to enforce the
function type when CFI is enabled, so we don't end up registering
destructors that panic the kernel.
v5:
- Rebased on bpf-next/master again.
v4: https://lore.kernel.org/bpf/20251126221724.897221-6-samitolvanen@google.com/
- Rebased on bpf-next/master.
- Renamed CONFIG_CFI_CLANG to CONFIG_CFI.
- Picked up Acked/Tested-by tags.
v3: https://lore.kernel.org/bpf/20250728202656.559071-6-samitolvanen@google.com/
- Renamed the functions and went back to __bpf_kfunc based
on review feedback.
v2: https://lore.kernel.org/bpf/20250725214401.1475224-6-samitolvanen@google.com/
- Annotated the stubs with CFI_NOSEAL to fix issues with IBT
sealing on x86.
- Changed __bpf_kfunc to explicit __used __retain.
v1: https://lore.kernel.org/bpf/20250724223225.1481960-6-samitolvanen@google.com/
====================
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260110082548.113748-6-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure that registered destructor kfuncs have the same type
as btf_dtor_kfunc_t to avoid a kernel panic on systems with
CONFIG_CFI enabled.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260110082548.113748-10-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With CONFIG_CFI enabled, the kernel strictly enforces that indirect
function calls use a function pointer type that matches the target
function. As bpf_testmod_ctx_release() signature differs from the
btf_dtor_kfunc_t pointer type used for the destructor calls in
bpf_obj_free_fields(), add a stub function with the correct type to
fix the type mismatch.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260110082548.113748-9-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With CONFIG_CFI enabled, the kernel strictly enforces that indirect
function calls use a function pointer type that matches the
target function. As bpf_kfree_skb() signature differs from the
btf_dtor_kfunc_t pointer type used for the destructor calls in
bpf_obj_free_fields(), add a stub function with the correct type to
fix the type mismatch.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260110082548.113748-8-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
