Two device specific fixes here, one avoiding glitches on chip select
with the STM32 driver and one for incorrectly configured clocks on the
Microchip QSPI controller.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmY+C7gACgkQJNaLcl1U
h9BDiQf9FFfXTPXCXOKfieymySTm/Fi2sjei3zDVeBq0udLXA5CCfGRwCdBLsOjC
94vJ1vqzaa+mu9Zgb7Ow1Cxx/twtwPsmViemE5o18KMNwpLjLFXiUG1H5ONgKwMS
8UfEe3PNjUGGHfxbgF7gSDrGzXaHJK4zdcHDzsb68Ch5bRdPWeOOEfOihwRW2YLO
gm3HL6Rd14Pq55MWYjH4tloEHQSoHHcYtlQDNV3LgM0IVBqts5aeB/tTdapoRMj6
auMtuBqLtldd0rtd9mp/o9jtyuCPJqDJaN9fgDXnTJlO6cqTtzlIk5ydTiubBJFE
F530OLr+pMkmfHPZkxGDUkuXKWKJ/A==
=VCmU
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Two device specific fixes here, one avoiding glitches on chip select
with the STM32 driver and one for incorrectly configured clocks on the
Microchip QSPI controller"
* tag 'spi-fix-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: microchip-core-qspi: fix setting spi bus clock rate
spi: stm32: enable controller before asserting CS
Two fixes here, one from Johan which fixes error handling when we
attempt to create duplicate debugfs files and one for an incorrect
specification of ramp_delay with the rtq2208.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmY+C2IACgkQJNaLcl1U
h9BkKAf+Jf9Xu7YMB66E4+6bn7T95+9Fn0U8u3pjdjpNXn6Z70Kf+Tpr2mCFwJbV
DNoMuFZzav1+TK/aKQaB1iEXIKgZck3VjsFTRjEwAH4jtjOnEwuvMBnXlrNXZGBb
/nHOf8y3GAyrYJ0I6E/4BwyHq+WfzK1Dp61dkv91B5W3Cmz/sfuzpZ5uRJpAP33v
OyGfrUl12F5H3HkqmSPGMmUvyCpt+vzi+Fc/haltEsGVM8TmvyDy/qBML7K2sr2d
K7ESqCw/0kZ0YlOCSnU8SbMClYj8awGXtWVBLSNWA+51qGvcwgVrOhcX/320x0J8
Qvug1DZ/dm4DvzwgjD2p013/SQykww==
=V0Kh
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two fixes here, one from Johan which fixes error handling when we
attempt to create duplicate debugfs files and one for an incorrect
specification of ramp_delay with the rtq2208"
* tag 'regulator-fix-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: fix debugfs creation regression
regulator: rtq2208: Fix the BUCK ramp_delay range to maximum of 16mVstep/us
Including:
- Fix offset miscalculation on ARM-SMMU driver
- AMD IOMMU fix for initializing state of untrusted devices
-----BEGIN PGP SIGNATURE-----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=zdMj
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix offset miscalculation on ARM-SMMU driver
- AMD IOMMU fix for initializing state of untrusted devices
* tag 'iommu-fixes-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Use the correct type in nvidia_smmu_context_fault()
iommu/amd: Enhance def_domain_type to handle untrusted device
- pmbus/ucd9000: Increase chip access delay to avoid random access
errors
- corsair-cpro: Protect kernel code against parallel hidraw access
from userspace
-----BEGIN PGP SIGNATURE-----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=sjbz
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- pmbus/ucd9000: Increase chip access delay to avoid random access
errors
- corsair-cpro: Protect kernel code against parallel hidraw access from
userspace
* tag 'hwmon-for-v6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/ucd9000) Increase delay from 250 to 500us
hwmon: (corsair-cpro) Protect ccp->wait_input_report with a spinlock
hwmon: (corsair-cpro) Use complete_all() instead of complete() in ccp_raw_event()
hwmon: (corsair-cpro) Use a separate buffer for sending commands
Following the failure observed with a delay of 250us, experiments were
conducted with various delays. It was found that a delay of 350us
effectively mitigated the issue.
To provide a more optimal solution while still allowing a margin for
stability, the delay is being adjusted to 500us.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20240507194603.1305750-1-lakshmiy@us.ibm.com
Fixes: 8d655e6523 ("hwmon: (ucd90320) Add minimum delay between bus accesses")
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The bridge patch is actually a follow-up to a recent fix in the same
area. We have a pending v6.8 AF_UNIX regression; it should be solved
soon, but not in time for this PR.
Current release - regressions:
- eth: ks8851: Queue RX packets in IRQ handler instead of disabling BHs
- net: bridge: fix corrupted ethernet header on multicast-to-unicast
Current release - new code bugs:
- xfrm: fix possible bad pointer derferencing in error path
Previous releases - regressionis:
- core: fix out-of-bounds access in ops_init
- ipv6:
- fix potential uninit-value access in __ip6_make_skb()
- fib6_rules: avoid possible NULL dereference in fib6_rule_action()
- tcp: use refcount_inc_not_zero() in tcp_twsk_unique().
- rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation
- rxrpc: fix congestion control algorithm
- bluetooth:
- l2cap: fix slab-use-after-free in l2cap_connect()
- msft: fix slab-use-after-free in msft_do_close()
- eth: hns3: fix kernel crash when devlink reload during initialization
- eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
Previous releases - always broken:
- xfrm: preserve vlan tags for transport mode software GRO
- tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets
- eth: hns3: keep using user config after hardware reset
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=qYKQ
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and IPsec.
The bridge patch is actually a follow-up to a recent fix in the same
area. We have a pending v6.8 AF_UNIX regression; it should be solved
soon, but not in time for this PR.
Current release - regressions:
- eth: ks8851: Queue RX packets in IRQ handler instead of disabling
BHs
- net: bridge: fix corrupted ethernet header on multicast-to-unicast
Current release - new code bugs:
- xfrm: fix possible bad pointer derferencing in error path
Previous releases - regressionis:
- core: fix out-of-bounds access in ops_init
- ipv6:
- fix potential uninit-value access in __ip6_make_skb()
- fib6_rules: avoid possible NULL dereference in fib6_rule_action()
- tcp: use refcount_inc_not_zero() in tcp_twsk_unique().
- rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation
- rxrpc: fix congestion control algorithm
- bluetooth:
- l2cap: fix slab-use-after-free in l2cap_connect()
- msft: fix slab-use-after-free in msft_do_close()
- eth: hns3: fix kernel crash when devlink reload during
initialization
- eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21
family
Previous releases - always broken:
- xfrm: preserve vlan tags for transport mode software GRO
- tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets
- eth: hns3: keep using user config after hardware reset"
* tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports
net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
net: hns3: fix kernel crash when devlink reload during initialization
net: hns3: fix port vlan filter not disabled issue
net: hns3: use appropriate barrier function after setting a bit value
net: hns3: release PTP resources if pf initialization failed
net: hns3: change type of numa_node_mask as nodemask_t
net: hns3: direct return when receive a unknown mailbox message
net: hns3: using user configure after hardware reset
net/smc: fix neighbour and rtable leak in smc_ib_find_route()
ipv6: prevent NULL dereference in ip6_output()
hsr: Simplify code for announcing HSR nodes timer setup
ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()
dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
rxrpc: Only transmit one ACK per jumbo packet received
rxrpc: Fix congestion control algorithm
selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC
ipv6: Fix potential uninit-value access in __ip6_make_skb()
net: phy: marvell-88q2xxx: add support for Rev B1 and B2
appletalk: Improve handling of broadcast packets
...
- clear stale KASan stack poison when a CPU resumes
-----BEGIN PGP SIGNATURE-----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=qmWM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM fix from Russell King:
- clear stale KASan stack poison when a CPU resumes
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9381/1: kasan: clear stale stack poison
regulator_get() may sometimes be called more than once for the same
consumer device, something which before commit dbe954d8f1 ("regulator:
core: Avoid debugfs: Directory ... already present! error") resulted in
errors being logged.
A couple of recent commits broke the handling of such cases so that
attributes are now erroneously created in the debugfs root directory the
second time a regulator is requested and the log is filled with errors
like:
debugfs: File 'uA_load' in directory '/' already present!
debugfs: File 'min_uV' in directory '/' already present!
debugfs: File 'max_uV' in directory '/' already present!
debugfs: File 'constraint_flags' in directory '/' already present!
on any further calls.
Fixes: 2715bb11cf ("regulator: core: Fix more error checking for debugfs_create_dir()")
Fixes: 08880713ce ("regulator: core: Streamline debugfs operations")
Cc: stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240509133304.8883-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZjwicQAKCRBZ7Krx/gZQ
67WgAP4iDssAVApazVvOUecQBtOd6xBvQUf1k3acMKa03hcdwAEAmM8qN0MpYUkz
MyVA6oRvC8selaWh62eXamWBgjc1Rwo=
=jLRy
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dentry leak fix from Al Viro:
"Dentry leak fix in the qibfs driver that I forgot to send a pull
request for ;-/
My apologies - it actually sat in vfs.git#fixes for more than two
months..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qibfs: fix dentry leak
On the mv88e6320 and 6321 switch family, port 0/1 are serdes only ports.
Modified the mv88e6352_get_port4_serdes_cmode function to pass a port
number since the register set of the 6352 is equal on the 6320/21.
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-3-steffen@innosonix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As of commit de5c9bf40c ("net: phylink: require supported_interfaces to
be filled")
Marvell 88e6320/21 switches fail to be probed:
...
mv88e6085 30be0000.ethernet-1:00: phylink: error: empty supported_interfaces
error creating PHYLINK: -22
...
The problem stems from the use of mv88e6185_phylink_get_caps() to get
the device capabilities.
Since there are serdes only ports 0/1 included, create a new dedicated
phylink_get_caps for the 6320 and 6321 to properly support their
set of capabilities.
Fixes: de5c9bf40c ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-2-steffen@innosonix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.
This patch fixes this by registering the devlink after
hardware initialization.
Fixes: cd6242991d ("net: hns3: add support for registering devlink for VF")
Fixes: 93305b77ff ("net: hns3: fix kernel crash when devlink reload during pf initialization")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state, and the port VLAN filter
remains enabled.
To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".
Fixes: 184cd221a8 ("net: hns3: disable port VLAN filter when support function level VLAN filter control")
Fixes: 2ba306627f ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().
CPU0 CPU1
========================== ===================================
hclgevf_set_timer_task() hclgevf_periodic_service_task()
set_bit(DOWN,state) test_bit(DOWN,state)
pf also has this issue.
Fixes: ff200099d2 ("net: hns3: remove unnecessary work in hclgevf_main")
Fixes: 1c6dfe6fc6 ("net: hns3: remove mailbox and reset work in hclge_main")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During the PF initialization process, hclge_update_port_info may return an
error code for some reason. At this point, the ptp initialization has been
completed. To void memory leaks, the resources that are applied by ptp
should be released. Therefore, when hclge_update_port_info returns an error
code, hclge_ptp_uninit is called to release the corresponding resources.
Fixes: eaf83ae59e ("net: hns3: add querying fec ability from firmware")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.
Fixes: 38caee9d3e ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the driver didn't return when receive a unknown
mailbox message, and continue checking whether need to
generate a response. It's unnecessary and may be incorrect.
Fixes: bb5790b71b ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:
+------+ +----+ +----+
| USER | | PF | | HW |
+---+--+ +-+--+ +-+--+
| ethtool --reset | |
+------------------->| reset command |
| ethtool --reset +-------------------->|
+------------------->| +---+
| +---+ | |
| | |reset currently | | HW RESET
| | |and wait to do | |
| |<--+ | |
| | send pervious cfg |<--+
| | (1000M FULL AN_ON) |
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | reset command |<--+
| +-------------------->|
| | +---+
| | send pervious cfg | | HW RESET
| | (10M HALF AN_OFF) |<--+
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | | |
| | read cfg(time task) |<--+
| | (10M HALF AN_OFF) |
| |<--------------------+
| | |
v v v
To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration
Fixes: f5f2b3e4dc ("net: hns3: add support for imp-controlled PHYs")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before ORing the new clock rate with the control register value read
from the hardware, the existing clock rate needs to be masked off as
otherwise the existing value will interfere with the new one.
CC: stable@vger.kernel.org
Fixes: 8596124c4c ("spi: microchip-core-qspi: Add support for microchip fpga qspi controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240508-fox-unpiloted-b97e1535627b@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
Up till now the code to start HSR announce timer, which triggers sending
supervisory frames, was assuming that hsr_netdev_notify() would be called
at least twice for hsrX interface. This was required to have different
values for old and current values of network device's operstate.
This is problematic for a case where hsrX interface is already in the
operational state when hsr_netdev_notify() is called, so timer is not
configured to trigger and as a result the hsrX is not sending supervisory
frames to HSR ring.
This error has been discovered when hsr_ping.sh script was run. To be
more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was
called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states
assigned in hsr_check_carrier_and_operstate(hsr). As a result there was
no issue with sending supervisory frames.
However, with hsr3, the notify function was called only once with
operstate set to IF_OPER_UP and timer responsible for triggering
supervisory frames was not fired.
The solution is to use netif_oper_up() and netif_running() helper
functions to assess if network hsrX device is up.
Only then, when the timer is not already pending, it is started.
Otherwise it is deactivated.
Fixes: f421436a59 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.
This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.
Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.
Fixes: c94a9aabec ("dt-bindings: net: mediatek,net: add mt7988-eth binding")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ee/V
-----END PGP SIGNATURE-----
Merge tag '6.9-rc7-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, all also for stable
- Three fixes related to SMB3 leases (fixes two xfstests, and a
locking issue)
- Unitialized variable fix
- Socket creation fix when bindv6only is set"
* tag '6.9-rc7-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: do not grant v2 lease if parent lease key and epoch are not set
ksmbd: use rwsem instead of rwlock for lease break
ksmbd: avoid to send duplicate lease break notifications
ksmbd: off ipv6only for both ipv4/ipv6 binding
ksmbd: fix uninitialized symbol 'share' in smb2_tree_connect()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZjsr0QAKCRDh3BK/laaZ
PLrpAP9Y1Kz3gSSH1wqDJ9+XzQZdm4dSInMP2Pe47BvSGG2YlAEAwmccoyIoiM58
qvHPETImNxIRTAVZdiBM3W4S3hnzCwc=
=SPoy
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Two one-liner fixes for issues introduced in -rc1"
* tag 'fuse-fixes-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtiofs: include a newline in sysfs tag
fuse: verify zero padding in fuse_backing_map
- Fix xfstests generic/013 test failure with dirsync mount option.
- Initialize the reserved fields of deleted file and stream extension
dentries to zero.
-----BEGIN PGP SIGNATURE-----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=zS+L
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix xfstests generic/013 test failure with dirsync mount option
- Initialize the reserved fields of deleted file and stream extension
dentries to zero
* tag 'exfat-for-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: zero the reserved fields of file and stream extension dentries
exfat: fix timing of synchronizing bitmap and inode
- Various syzbot fixes; mainly small gaps in validation
- Fix an integer overflow in fiemap() which was preventing filefrag from
returning the full list of extents
- Fix a refcounting bug on the device refcount, turned up by new
assertions in the development branch
- Fix a device removal/readd bug; write_super() was repeatedly dropping
and retaking bch_dev->io_ref references
-----BEGIN PGP SIGNATURE-----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=rlea
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-05-07.2' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- Various syzbot fixes; mainly small gaps in validation
- Fix an integer overflow in fiemap() which was preventing filefrag
from returning the full list of extents
- Fix a refcounting bug on the device refcount, turned up by new
assertions in the development branch
- Fix a device removal/readd bug; write_super() was repeatedly dropping
and retaking bch_dev->io_ref references
* tag 'bcachefs-2024-05-07.2' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Add missing sched_annotate_sleep() in bch2_journal_flush_seq_async()
bcachefs: Fix race in bch2_write_super()
bcachefs: BCH_SB_LAYOUT_SIZE_BITS_MAX
bcachefs: Add missing skcipher_request_set_callback() call
bcachefs: Fix snapshot_t() usage in bch2_fs_quota_read_inode()
bcachefs: Fix shift-by-64 in bformat_needs_redo()
bcachefs: Guard against unknown k.k->type in __bkey_invalid()
bcachefs: Add missing validation for superblock section clean
bcachefs: Fix assert in bch2_alloc_v4_invalid()
bcachefs: fix overflow in fiemap
bcachefs: Add a better limit for maximum number of buckets
bcachefs: Fix lifetime issue in device iterator helpers
bcachefs: Fix bch2_dev_lookup() refcounting
bcachefs: Initialize bch_write_op->failed in inline data path
bcachefs: Fix refcount put in sb_field_resize error path
bcachefs: Inodes need extra padding for varint_decode_fast()
bcachefs: Fix early error path in bch2_fs_btree_key_cache_exit()
bcachefs: bucket_pos_to_bp_noerror()
bcachefs: don't free error pointers
bcachefs: Fix a scheduler splat in __bch2_next_write_buffer_flush_journal_buf()
These are a couple of last minute fixes that came in over the
previous week, addressing:
- A pin configuration bug on a qualcomm board that caused
issues with ethernet and mmc.
- Two minor code fixes for misleading console output in the
microchip firmware driver.
- A build warning in the sifive cache driver
-----BEGIN PGP SIGNATURE-----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=CxgC
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of last minute fixes that came in over the previous
week, addressing:
- A pin configuration bug on a qualcomm board that caused issues with
ethernet and mmc
- Two minor code fixes for misleading console output in the microchip
firmware driver
- A build warning in the sifive cache driver"
* tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: clarify that sizes and addresses are in hex
firmware: microchip: don't unconditionally print validation success
arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
cache: sifive_ccache: Silence unused variable warning
-----BEGIN PGP SIGNATURE-----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=EQN9
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Update kernel-parameters doc to describe "pcie_aspm=off" more
accurately (Bjorn Helgaas)
- Restore the parent's (not the child's) ASPM state to the parent
during resume, which fixes a reboot during resume (Kai-Heng Feng)
* tag 'pci-v6.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Restore parent state to parent, child state to child
PCI/ASPM: Clarify that pcie_aspm=off means leave ASPM untouched
David Howells says:
====================
rxrpc: Miscellaneous fixes (part)
Here some miscellaneous fixes for AF_RXRPC:
(1) Fix the congestion control algorithm to start cwnd at 4 and to not cut
ssthresh when the peer cuts its rwind size.
(2) Only transmit a single ACK for all the DATA packets glued together
into a jumbo packet to reduce the number of ACKs being generated.
====================
Link: https://lore.kernel.org/r/20240503150749.1001323-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only generate one ACK packet for all the subpackets in a jumbo packet. If
we would like to generate more than one ACK, we prioritise them base on
their reason code, in the order, highest first:
OutOfSeq > NoSpace > ExceedsWin > Duplicate > Requested > Delay > Idle
For the first four, we reference the lowest offending subpacket; for the
last three, the highest.
This reduces the number of ACKs we end up transmitting to one per UDP
packet transmitted to reduce network loading and packet parsing.
Fixes: 5d7edbc923 ("rxrpc: Get rid of the Rx ring")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com <mailto:jaltman@auristor.com>>
Link: https://lore.kernel.org/r/20240503150749.1001323-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the following fixes to the congestion control algorithm:
(1) Don't vary the cwnd starting value by the size of RXRPC_TX_SMSS since
that's currently held constant - set to the size of a jumbo subpacket
payload so that we can create jumbo packets on the fly. The current
code invariably picks 3 as the starting value.
Further, the starting cwnd needs to be an even number because we ack
every other packet, so set it to 4.
(2) Don't cut ssthresh when we see an ACK come from the peer with a
receive window (rwind) less than ssthresh. ssthresh keeps track of
characteristics of the connection whereas rwind may be reduced by the
peer for any reason - and may be reduced to 0.
Fixes: 1fc4fa2ac9 ("rxrpc: Fix congestion management")
Fixes: 0851115090 ("rxrpc: Reduce ssthresh to peer's receive window")
Signed-off-by: David Howells <dhowells@redhat.com>
Suggested-by: Simon Wilkinson <sxw@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com <mailto:jaltman@auristor.com>>
Link: https://lore.kernel.org/r/20240503150749.1001323-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When creating the topology for the test, three veth pairs are created in
the initial network namespace before being moved to one of the network
namespaces created by the test.
On systems where systemd-udev uses MACAddressPolicy=persistent (default
since systemd version 242), this will result in some net devices having
the same MAC address since they were created with the same name in the
initial network namespace. In turn, this leads to arping / ndisc6
failing since packets are dropped by the bridge's loopback filter.
Fix by creating each net device in the correct network namespace instead
of moving it there from the initial network namespace.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240426074015.251854d4@kernel.org/
Fixes: 7648ac72dc ("selftests: net: Add bridge neighbor suppression test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240507113033.1732534-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As it was done in commit fc1092f515 ("ipv4: Fix uninit-value access in
__ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags
instead of testing HDRINCL on the socket to avoid a race condition which
causes uninit-value access.
Fixes: ea30388bae ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Different revisions of the Marvell 88q2xxx phy needs different init
sequences.
Add init sequence for Rev B1 and Rev B2. Rev B2 init sequence skips one
register write.
Tested-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a broadcast AppleTalk packet is received, prefer queuing it on the
socket whose address matches the address of the interface that received
the packet (and is listening on the correct port). Userspace
applications that handle such packets will usually send a response on
the same socket that received the packet; this fix allows the response
to be sent on the correct interface.
If a socket matching the interface's address is not found, an arbitrary
socket listening on the correct port will be used, if any. This matches
the implementation's previous behavior.
Fixes atalkd's responses to network information requests when multiple
network interfaces are configured to use AppleTalk.
Link: https://lore.kernel.org/netdev/20200722113752.1218-2-vincent.ldev@duvert.net/
Link: https://gist.github.com/VinDuv/4db433b6dce39d51a5b7847ee749b2a4
Signed-off-by: Vincent Duvert <vincent.ldev@duvert.net>
Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The change from skb_copy to pskb_copy unfortunately changed the data
copying to omit the ethernet header, since it was pulled before reaching
this point. Fix this by calling __skb_push/pull around pskb_copy.
Fixes: 59c878cbcd ("net: bridge: fix multicast-to-unicast with fraglist GSO")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When tmigr_setup_groups() fails the level 0 group allocation, then the
cleanup derefences index -1 of the local stack array.
Prevent this by checking the loop condition first.
Fixes: 7ee9887703 ("timers: Implement the hierarchical pull model")
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20240506041059.86877-1-ppbuk5246@gmail.com
The internal tag string doesn't contain a newline. Append one when
emitting the tag via sysfs.
[Stefan] Orthogonal to the newline issue, sysfs_emit(buf, "%s", fs->tag) is
needed to prevent format string injection.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Fixes: a8f62f50b4 ("virtiofs: export filesystem tags through sysfs")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The current behavior is to accept any strings as inputs, this results in
an inconsistent result where an unexisting scheduler can be set:
# sysctl -w net.mptcp.scheduler=notdefault
net.mptcp.scheduler = notdefault
This patch changes this behavior by checking for existing scheduler
before accepting the input.
Fixes: e3b2870b6d ("mptcp: add a new sysctl scheduler")
Cc: stable@vger.kernel.org
Signed-off-by: Gregory Detal <gregory.detal@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240506-upstream-net-20240506-mptcp-sched-exist-v1-1-2ed1529e521e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 7e8cdc9714 ("nfc: Add KCOV annotations") added
kcov_remote_start_common()/kcov_remote_stop() pair into nci_rx_work(),
with an assumption that kcov_remote_stop() is called upon continue of
the for loop. But commit d24b03535e ("nfc: nci: Fix uninit-value in
nci_dev_up and nci_ntf_packet") forgot to call kcov_remote_stop() before
break of the for loop.
Reported-by: syzbot <syzbot+0438378d6f157baae1a2@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2
Fixes: d24b03535e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet")
Suggested-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/6d10f829-5a0c-405a-b39a-d7266f3a1a0b@I-love.SAKURA.ne.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bch2_write_super() was looping over online devices multiple times -
dropping and retaking io_ref each time.
This meant it could race with device removal; it could increment the
sequence number on a device but fail to write it - and then if the
device was re-added, it would get confused the next time around thinking
a superblock write was silently dropped.
Fix this by taking io_ref once, and stashing pointers to online devices
in a darray.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
On ths SA8155P automotive platform, the wrong gpio controller is defined
for the SD-card detect pin, which depending on probe ordering of things
cause ethernet to be broken. The card detect pin reference is corrected
to solve this problem.
-----BEGIN PGP SIGNATURE-----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=+Jm6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CCJj
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
One more Qualcomm Arm64 DeviceTree fix for v6.9
On ths SA8155P automotive platform, the wrong gpio controller is defined
for the SD-card detect pin, which depending on probe ordering of things
cause ethernet to be broken. The card detect pin reference is corrected
to solve this problem.
* tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
Link: https://lore.kernel.org/r/20240427153817.1430382-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Attributes for FDB learned entries were added to the if_link netlink api
for bridge linkinfo but are missing from the rt_link.yaml spec. Add the
missing attributes to the spec.
Fixes: ddd1ad6882 ("net: bridge: Add netlink knobs for number / max learned FDB entries")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240503164304.87427-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
