[why & how]
Some DCN4.2 related code is missing from upstream
Fixes: e56e3cff2a ("drm/amd/display: Sync dcn42 with DC 3.2.373")
Acked-by: ChiaHsuan Chung <ChiaHsuan.Chung@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_pmops_runtime_suspend() runs almost the same code that
amdgpu_pmops_runtime_idle() runs. That is there is pointless code
duplication.
[How]
Move amdgpu_pmops_runtime_idle() up, extract common code and then
call from both functions. No intended functional changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
allocate_sdma_queue has an option where the sdma queue id can be
specified (used by CRIU). We weren't bounds-checking that
value.
Confirm it's less than the maximum number of queues.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_seq64_alloc there is a possibility that two difference cores
from two separate NODES can try to and could get the same free slot.
So this fixes that race here using atomic test_and_set clear operations.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
This may fix VM faults when using VCE 3.
Cc: John Olender <john.olender@gmail.com>
Fixes: e982262214 ("drm/amdgpu: recalculate VCE firmware BO size")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Additionally, increase the VCE_V2_0_DATA_SIZE to
have extra space after the VCE handles.
Also increase the data size used for each VCE handle.
The FW needs 23744 bytes, use 24K to be safe.
This fixes VM faults when using VCE 2.
Cc: John Olender <john.olender@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4802
Fixes: e982262214 ("drm/amdgpu: recalculate VCE firmware BO size")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VCE1 firmware works slightly differently and is already
loaded by vce_v1_0_load_fw(). It doesn't actually need to
call amdgpu_vce_resume().
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Make sure the stack and data offsets are aligned to
the 32K TLB size.
Check that the FW microcode actually fits in the
space that is reserved for it.
Fixes: d4a640d4b9 ("drm/amdgpu/vce1: Implement VCE1 IP block (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only allocate entries from the GTT manager when the
VCE GTT node is not allocated yet. This prevents the
possibility of allocating them multiple times, which
causes issues during GPU reset and suspend/resume.
Fixes: 71aec08f80 ("amdgpu/vce: use amdgpu_gtt_mgr_alloc_entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously, I had assumed this was not possible
so it was OK to not handle it, but now we got a report
from a user who has a board that is configured this way.
When the VCPU BO is already located in a low 32-bit address
in VRAM (eg. when VRAM is mapped to the low address space),
don't do the workaround.
Fixes: 71aec08f80 ("amdgpu/vce: use amdgpu_gtt_mgr_alloc_entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same thing is already checked a few lines above.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ensuring the low 32-bit address, make sure it is
less than 128 MiB, otherwise the VCE seems to fail to initialize.
This seems to be an undocumented limitation of the firmware
validation mechanism. Note that in case of VCE1 the BAR
address is zero and we can't change it also due to the
firmware validator.
When programming the mmVCE_VCPU_CACHE_OFFSETn registers,
don't AND them with a mask. This is incorrect because
the register mask is actually 0x0fffffff and useless because
we already ensure the addresses are below the limit.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The TLB is organized in groups of 8 entries, each one is 4K.
On Tahiti, the HW requires these GART entries to be 32K-aligned.
This fixes a VCE 1 firmware validation failure that can happen
after suspend/resume since we use amdgpu_gtt_mgr for VCE 1.
v2:
- Change variable declaration order
- Add comment about "V bit HW bug"
Fixes: 698fa62f56 ("drm/amdgpu: Add helper to alloc GART entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and
cp_hqd_cntl_stack_offset values read directly from the MQD, which are
written by GPU microcode and fully attacker-controlled on the
CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3).
this leads to an unbounded copy_to_user() that can leak adjacent
GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB
read length, if size is set to 1 MiB against a 4 KiB allocation, we leak
1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR
pointers).
Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated
buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the
clamped size before performing arithmetic and copy_to_user().
This ensures we never read beyond the allocated kernel BO regardless of
attacker-supplied MQD field values.
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In smu_v15_0_fini_smc_tables, dpm_policies was not freed or NULLed, causing a memory leak.
Add kfree() and NULL assignment to properly release memory and avoid dangling pointers.
Fixes: 2beedc3a92 ("drm/amd/pm: Add initial support for smu v15_0_8");
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After suspend/resume sdma_gang is supported on MES 12.1, SDMA queue reset
is supported too.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Michael Chen<michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
suspend_all_sdma_gangs is supported in new MES firmware for gfx 12.1
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michael Chen<michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_virt_ras_get_batch_records() indexed batchs[] and records[]
from ras_cmd_batch_trace_record_rsp copied out of shared memory without
fully bounding the cache window or per-batch offset/trace_num. A
tampered or corrupted buffer could set real_batch_num past the array,
make a naive start_batch_id + real_batch_num comparison wrap in
uint64_t, or point offset+trace_num past records[].
Add amdgpu_virt_ras_check_batch_cached() for a subtraction-based window
with a real_batch_num cap, re-run it after GET_BATCH_TRACE_RECORD, and
use an explicit batch index into batchs[]. Consolidate batch_id,
trace_num, and offset+trace_num checks; on any failure memset the cache
and return -EIO so the next call refetches.
Signed-off-by: Chenglei Xie <Chenglei.Xie@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3:
improve the coding style.
v2:
use debugfs_create_x64 and debugfs_create_x8 to create node.
v1:
1. Add guest driver CUID support
2. Do not expose vf index(variable "fcn_idx") to customers,
replace the fcn_idx with pad.
Only expose the unitid to customers.
background:
Change fcn_idx to pad, VF index won't expose to guest vm.
Introduce a new unitid field as the VF identifier to replace the VF index:
1).unitid is assigned by the host driver
2).It is delivered to the guest via the pf2vf message
3).The application or umd can retrieve united from the sysfs node
Signed-off-by: chong li <chongli2@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Discovery table may be kept at offset 0 by host driver. Remove the
validation check.
Fixes: 01bdc7e219 ("drm/amdgpu: New interface to get IP discovery binary v3")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
va_cursor struct needs to be cleaned even if the mapping
has been removed already.
Also simplify it by make it a void function as return value
check isn't needed as its called during tear down.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_gem_userptr_ioctl() currently accepts any value of args->addr
and only discovers an out-of-range pointer much later, inside
amdgpu_gem_object_create() and the HMM mirror registration path.
Userspace can drive that path with kernel-side virtual addresses;
the get_user_pages() layer rejects them, but only after the driver
has already allocated a GEM object and started wiring up notifier
state that then has to be torn down on failure.
Add an access_ok() guard at the top of the ioctl, right after the
existing page-alignment check and before flag validation, so any
address that does not lie within the calling task's user address
range is rejected with -EFAULT before any allocation occurs. No
legitimate ROCm/HSA userspace passes kernel-mode pointers through
this interface, so this is defense-in-depth rather than a behaviour
change for valid callers; -EFAULT matches the convention already
used by other uaccess-style rejections in the kernel.
Also add an explicit #include <linux/uaccess.h>; access_ok() is
otherwise only available transitively through other headers in
this translation unit.
Signed-off-by: Amir Shetaia <Amir.Shetaia@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VPE1 could possibly hang and fail to power off at the end of commands in
collaboration mode. This workaround adds a COLLAB_SYNC after TRAP to
force instances synchronized to avoid VPE1 fail to power off.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alan liu <haoping.liu@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5171
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pagefaults does not have process information correctly populated
as vm->task is not set during vm_init but should be updated while
real submission. So setting that up during signal_ioctl to get
the correct submission process details.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While tear down of a userq_mgr is happening when all the queues
are free we should cancel any reset work if pending before exiting.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The depends on !UML was added in commit dffe681317 ("amdgpu: Avoid
building on UML") to work around build failures with allyesconfig on
UML. The original errors were:
- smu7_hwmgr.c: incompatible pointer type 'struct cpuinfo_um *' vs
'struct cpuinfo_x86 *' in intel_core_rkl_chk()
- kfd_topology.c: 'struct cpuinfo_um' has no member named 'apicid'
Both issues have since been resolved independently:
- intel_core_rkl_chk() has been removed entirely.
- kfd_topology.c now uses a proper #ifdef CONFIG_X86_64 guard.
- All other cpuinfo_x86/cpu_data() references in the driver are
guarded by #if IS_ENABLED(CONFIG_X86) or #ifdef CONFIG_X86_64.
Removing this exclusion allows CONFIG_DRM_AMDGPU to be selected on UML,
which in turn enables running KUnit tests (such as amdgpu_dm_crc_test)
under UML without needing a full hardware-capable kernel build.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is illegal to schedule reset work from another reset work!
Fix this by scheduling the userq reset work directly on the work queue
of the reset domain.
Not fully tested, I leave that to the IGT test cases.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mqd and fw objects are queue core objects which should remain
valid and never be unmapped and evicted for user queues to work
properly.
During eviction if these buffers are evicted the hw continue to
use the invalid addresses and caused page faults and system hung.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To access the bo from vm mapping first lock the root bo and
then the object bo of the mapping to make sure both locks
are taken safely.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- Update fourcc descriptions of BG(R) floating formats.
- Add deferred mapping support to virtio.
Cross-subsystem Changes:
- Update lontium lt9211 bindings.
Core Changes:
- Bugfixes and cleanups to pagemap, dp/mst.
- Add lockdep annotations to gpu buddy manager.
- Updates to drm/dp for PR + VRR.
- Improve documentation's table of contents.
- Bump fpfn and lpfn in ttm to 64-bits.
Driver Changes:
- Assorted bugfixes, cleanups and updates to panthor, nouveau, qaic,
hisilicon.
- Add support for CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, IVO
R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels.
- More implementation of AIE4 in amdxdna.
- Update panels to use refcounts instead of devm_kzalloc to make
drm_panel_init static.
- Add support for the RCade Display Adapter to gud.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmoFw/UACgkQ/lWMcqZw
E8PPeRAAoITX1HZEs+FWz+YdJDVxSA+YI54z4uYXp3MsQsZWjytYBhp8vBlwTj64
UAmvz3NXt0taqrirRQoX2Ueoxuf2uUBn/uqlB7+UGeCMpDEkCbnMiRUPwgpf8N9l
7XPlSThMacVaWIHG1ktz22VN4antmwkf0eonByeGyxg+zGRXf5vSwRm0UFe/zLeI
g/hljcMRRdZ7jrGQOyFj/MtkqpNm6JPLG0gk6u/vm3e4zs36VpFUDjPfznrmIALQ
KVSDoYFBYFjE9TMrm2A7lioLkoU7agbByJtxcGAu/sEKBWNk+lQmQqCMFh8jsYjG
YbQQQKbo8hhIHE7/Txj6ZVMk4MthQVadIQz2HXtERbMzAWbmoRLSTCCbhUcw4Oat
oEJn90jI7PfiQqQ861YPniI83Il1j6k7vGA3d1rtZitpY7W3K+8jzXQAhVvJ4+1i
E977NT9PF42kUHyePqVbrtGyFAYuGcRG0gTQQdqmB8NVQVulO/s2nU1StbuJ1gP3
6Z+9MMseQCVtDFAkkwVNMH9t1MB/rq7P3PjoYQehCJaFjecUFz7pWXSHbIZbSqWV
QiQL7zr1I9KDras1Cq4SSZTS3YfGT5cR6fEcR3RdFXGkolMovw3/iiP2BtwP+ALR
SDYefjejaSwUGrU0FLZ8ejFAil96zNM8zXcAU3d+gnXtysOh1lA=
=UqYc
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-05-14' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Update fourcc descriptions of BG(R) floating formats.
- Add deferred mapping support to virtio.
Cross-subsystem Changes:
- Update lontium lt9211 bindings.
Core Changes:
- Bugfixes and cleanups to pagemap, dp/mst.
- Add lockdep annotations to gpu buddy manager.
- Updates to drm/dp for PR + VRR.
- Improve documentation's table of contents.
- Bump fpfn and lpfn in ttm to 64-bits.
Driver Changes:
- Assorted bugfixes, cleanups and updates to panthor, nouveau, qaic,
hisilicon.
- Add support for CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, IVO
R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels.
- More implementation of AIE4 in amdxdna.
- Update panels to use refcounts instead of devm_kzalloc to make
drm_panel_init static.
- Add support for the RCade Display Adapter to gud.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/98788814-e462-4950-bb2a-ea493c30d0c0@linux.intel.com
If userspace never maps GEM object, then BO wastes hostmem space
because VirtIO-GPU driver maps VRAM BO at the BO's creating time.
Make mappings on-demand by adding new RESOURCE_CREATE_BLOB IOCTL/UAPI
hinting flag telling that host mapping should be deferred until first
mapping is made when the flag is set by userspace.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patch.msgid.link/20260501000043.2483678-1-dmitry.osipenko@collabora.com
We only expect and handle the GT_MI_USER_INTERRUPT from the
engines, there is no point in enabling other interrupts, like
GT_CONTEXT_SWITCH_INTERRUPT, if we don't intent to handle them.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260511172838.2299-3-michal.wajdeczko@intel.com
To workaround some corner case hardware limitations, new programming
note for the memory based interrupt handler suggests to assume that
some status bytes, like GT_MI_USER_INTERRUPT and GUC_INTR_GUC2HOST,
are always set. Update our interrupt handler to follow the new rules.
Bspec: 53672
Fixes: a6581ebe76 ("drm/xe/vf: Introduce Memory Based Interrupts Handler")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260511172838.2299-2-michal.wajdeczko@intel.com
Use i2c_lock_bus(), i2c_trylock_bus(), and i2c_unlock_bus() instead of
poking at i2c adapter's lock_ops directly.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260513080103.169402-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
fpfn and lpfn in struct ttm_place are 32-bit page numbers. With 4KB page
size this can support up to 44-bit physical addressing. Grow these to
64-bit (uint64_t) to support larger physical addresses.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20260513141253.20410-1-felix.kuehling@amd.com
Add display specific helpers for getting the register offset, checking
for equality and validity. Add them as static inlines for increased type
safety.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/7fe12d4e5465778209ccf29359767a197b031dd9.1777972548.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add struct intel_error_regs, a display version of struct
i915_error_regs, and use it. The goal is to reduce the dependency on
i915 core types and headers.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/7f909c6b1f7ae623792b5abc3d31d4a682006e24.1777972548.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add struct intel_irq_regs, a display version of struct i915_irq_regs,
and use it. The goal is to reduce the dependency on i915 core types and
headers.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/56118c2e40e171e898034a7bea6c8d14f515f5c1.1777972548.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a typedef alias intel_reg_t for i915_reg_t, and use it exclusively
in display code. The goal is to eventually define a distinct type for
display, but for now just use an alias.
In a handful of places include intel_display_reg_defs.h instead of
i915_reg_defs.h to get the definition, and isolate the i915_reg_defs.h
include there.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/f5bb0122143c39ce7f9ce8a1605a7637e569f7f8.1777972548.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
During recent GGTT refactoring we missed to drop now unused field
from the xe_tile. Drop it now.
Fixes: e904c56ba6 ("drm/xe: Rewrite GGTT VF initialization")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260510205605.642-1-michal.wajdeczko@intel.com
Some of the GPU documentation pages are quite long, with various levels
of details. Add document internal tables of contents to the larger
documents to make them easier to navigate.
The index.rst in the sub-directories have toctrees, which provide
similar overviews.
Fix one missing newline at the end of drm-uapi.rst while at it,
primarily because rst should have it, and secondarily because my editor
rst mode refuses to save the file without it.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/e3f9357c0e8198cc48e69e2a3b8ca072c7ab92ca.1778238671.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The main GPU documentation toctree has no limit to the toctree depth,
which means the main GPU index page recursively includes all the
headings in all of GPU documentation in the single table of
contents. This makes getting any kind of overview of the documentation
really difficult.
Limit the main toctree depth to 2 i.e. show at most two levels of
headings.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/cddd2d11c104132801510e3ab4e4b9ef3ea9cb6d.1778238671.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In the past, we use width and height to look up our PLL value.
But actually the actual clock check is also necessnary. There are
some resolutions that width and height same, but its clock different.
Add the clock check when using pll_table to determine the PLL value.
Fixes: da52605eea ("drm/hisilicon/hibmc: Add support for display engine")
Signed-off-by: Lin He <helin52@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260509032302.2057227-5-shiyongbang@huawei.com
If there's no VGA output, this encoder modeset won't be called, which
will cause displaying data from GPU being cut off. It's actually a
common display config for DP and VGA, so move the vdac encoder modeset
to driver load stage.
Removed invalid bit configurations from `hibmc_display_ctrl`
Fixes: 5294967f4a ("drm/hisilicon/hibmc: Add support for VDAC")
Signed-off-by: Lin He <helin52@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260509032302.2057227-4-shiyongbang@huawei.com
